1 // SPDX-License-Identifier: GPL-2.0-only 2 #include <linux/aer.h> 3 #include <linux/delay.h> 4 #include <linux/firmware.h> 5 #include <linux/list.h> 6 #include <linux/module.h> 7 #include <linux/mutex.h> 8 #include <linux/pci.h> 9 #include <linux/pci_ids.h> 10 11 #include "nitrox_dev.h" 12 #include "nitrox_common.h" 13 #include "nitrox_csr.h" 14 #include "nitrox_hal.h" 15 #include "nitrox_isr.h" 16 #include "nitrox_debugfs.h" 17 18 #define CNN55XX_DEV_ID 0x12 19 #define UCODE_HLEN 48 20 #define DEFAULT_SE_GROUP 0 21 #define DEFAULT_AE_GROUP 0 22 23 #define DRIVER_VERSION "1.2" 24 #define CNN55XX_UCD_BLOCK_SIZE 32768 25 #define CNN55XX_MAX_UCODE_SIZE (CNN55XX_UCD_BLOCK_SIZE * 2) 26 #define FW_DIR "cavium/" 27 /* SE microcode */ 28 #define SE_FW FW_DIR "cnn55xx_se.fw" 29 /* AE microcode */ 30 #define AE_FW FW_DIR "cnn55xx_ae.fw" 31 32 static const char nitrox_driver_name[] = "CNN55XX"; 33 34 static LIST_HEAD(ndevlist); 35 static DEFINE_MUTEX(devlist_lock); 36 static unsigned int num_devices; 37 38 /** 39 * nitrox_pci_tbl - PCI Device ID Table 40 */ 41 static const struct pci_device_id nitrox_pci_tbl[] = { 42 {PCI_VDEVICE(CAVIUM, CNN55XX_DEV_ID), 0}, 43 /* required last entry */ 44 {0, } 45 }; 46 MODULE_DEVICE_TABLE(pci, nitrox_pci_tbl); 47 48 static unsigned int qlen = DEFAULT_CMD_QLEN; 49 module_param(qlen, uint, 0644); 50 MODULE_PARM_DESC(qlen, "Command queue length - default 2048"); 51 52 #ifdef CONFIG_PCI_IOV 53 int nitrox_sriov_configure(struct pci_dev *pdev, int num_vfs); 54 #else 55 int nitrox_sriov_configure(struct pci_dev *pdev, int num_vfs) 56 { 57 return 0; 58 } 59 #endif 60 61 /** 62 * struct ucode - Firmware Header 63 * @id: microcode ID 64 * @version: firmware version 65 * @code_size: code section size 66 * @raz: alignment 67 * @code: code section 68 */ 69 struct ucode { 70 u8 id; 71 char version[VERSION_LEN - 1]; 72 __be32 code_size; 73 u8 raz[12]; 74 u64 code[0]; 75 }; 76 77 /** 78 * write_to_ucd_unit - Write Firmware to NITROX UCD unit 79 */ 80 static void write_to_ucd_unit(struct nitrox_device *ndev, u32 ucode_size, 81 u64 *ucode_data, int block_num) 82 { 83 u32 code_size; 84 u64 offset, data; 85 int i = 0; 86 87 /* 88 * UCD structure 89 * 90 * ------------- 91 * | BLK 7 | 92 * ------------- 93 * | BLK 6 | 94 * ------------- 95 * | ... | 96 * ------------- 97 * | BLK 0 | 98 * ------------- 99 * Total of 8 blocks, each size 32KB 100 */ 101 102 /* set the block number */ 103 offset = UCD_UCODE_LOAD_BLOCK_NUM; 104 nitrox_write_csr(ndev, offset, block_num); 105 106 code_size = roundup(ucode_size, 16); 107 while (code_size) { 108 data = ucode_data[i]; 109 /* write 8 bytes at a time */ 110 offset = UCD_UCODE_LOAD_IDX_DATAX(i); 111 nitrox_write_csr(ndev, offset, data); 112 code_size -= 8; 113 i++; 114 } 115 116 usleep_range(300, 400); 117 } 118 119 static int nitrox_load_fw(struct nitrox_device *ndev) 120 { 121 const struct firmware *fw; 122 const char *fw_name; 123 struct ucode *ucode; 124 u64 *ucode_data; 125 u64 offset; 126 union ucd_core_eid_ucode_block_num core_2_eid_val; 127 union aqm_grp_execmsk_lo aqm_grp_execmask_lo; 128 union aqm_grp_execmsk_hi aqm_grp_execmask_hi; 129 u32 ucode_size; 130 int ret, i = 0; 131 132 fw_name = SE_FW; 133 dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); 134 135 ret = request_firmware(&fw, fw_name, DEV(ndev)); 136 if (ret < 0) { 137 dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); 138 return ret; 139 } 140 141 ucode = (struct ucode *)fw->data; 142 143 ucode_size = be32_to_cpu(ucode->code_size) * 2; 144 if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) { 145 dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", 146 ucode_size, fw_name); 147 release_firmware(fw); 148 return -EINVAL; 149 } 150 ucode_data = ucode->code; 151 152 /* copy the firmware version */ 153 memcpy(&ndev->hw.fw_name[0][0], ucode->version, (VERSION_LEN - 2)); 154 ndev->hw.fw_name[0][VERSION_LEN - 1] = '\0'; 155 156 /* Load SE Firmware on UCD Block 0 */ 157 write_to_ucd_unit(ndev, ucode_size, ucode_data, 0); 158 159 release_firmware(fw); 160 161 /* put all SE cores in DEFAULT_SE_GROUP */ 162 offset = POM_GRP_EXECMASKX(DEFAULT_SE_GROUP); 163 nitrox_write_csr(ndev, offset, (~0ULL)); 164 165 /* write block number and firmware length 166 * bit:<2:0> block number 167 * bit:3 is set SE uses 32KB microcode 168 * bit:3 is clear SE uses 64KB microcode 169 */ 170 core_2_eid_val.value = 0ULL; 171 core_2_eid_val.ucode_blk = 0; 172 if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE) 173 core_2_eid_val.ucode_len = 1; 174 else 175 core_2_eid_val.ucode_len = 0; 176 177 for (i = 0; i < ndev->hw.se_cores; i++) { 178 offset = UCD_SE_EID_UCODE_BLOCK_NUMX(i); 179 nitrox_write_csr(ndev, offset, core_2_eid_val.value); 180 } 181 182 183 fw_name = AE_FW; 184 dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); 185 186 ret = request_firmware(&fw, fw_name, DEV(ndev)); 187 if (ret < 0) { 188 dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); 189 return ret; 190 } 191 192 ucode = (struct ucode *)fw->data; 193 194 ucode_size = be32_to_cpu(ucode->code_size) * 2; 195 if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) { 196 dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", 197 ucode_size, fw_name); 198 release_firmware(fw); 199 return -EINVAL; 200 } 201 ucode_data = ucode->code; 202 203 /* copy the firmware version */ 204 memcpy(&ndev->hw.fw_name[1][0], ucode->version, (VERSION_LEN - 2)); 205 ndev->hw.fw_name[1][VERSION_LEN - 1] = '\0'; 206 207 /* Load AE Firmware on UCD Block 2 */ 208 write_to_ucd_unit(ndev, ucode_size, ucode_data, 2); 209 210 release_firmware(fw); 211 212 /* put all AE cores in DEFAULT_AE_GROUP */ 213 offset = AQM_GRP_EXECMSK_LOX(DEFAULT_AE_GROUP); 214 aqm_grp_execmask_lo.exec_0_to_39 = 0xFFFFFFFFFFULL; 215 nitrox_write_csr(ndev, offset, aqm_grp_execmask_lo.value); 216 offset = AQM_GRP_EXECMSK_HIX(DEFAULT_AE_GROUP); 217 aqm_grp_execmask_hi.exec_40_to_79 = 0xFFFFFFFFFFULL; 218 nitrox_write_csr(ndev, offset, aqm_grp_execmask_hi.value); 219 220 /* write block number and firmware length 221 * bit:<2:0> block number 222 * bit:3 is set AE uses 32KB microcode 223 * bit:3 is clear AE uses 64KB microcode 224 */ 225 core_2_eid_val.value = 0ULL; 226 core_2_eid_val.ucode_blk = 2; 227 if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE) 228 core_2_eid_val.ucode_len = 1; 229 else 230 core_2_eid_val.ucode_len = 0; 231 232 for (i = 0; i < ndev->hw.ae_cores; i++) { 233 offset = UCD_AE_EID_UCODE_BLOCK_NUMX(i); 234 nitrox_write_csr(ndev, offset, core_2_eid_val.value); 235 } 236 237 return 0; 238 } 239 240 /** 241 * nitrox_add_to_devlist - add NITROX device to global device list 242 * @ndev: NITROX device 243 */ 244 static int nitrox_add_to_devlist(struct nitrox_device *ndev) 245 { 246 struct nitrox_device *dev; 247 int ret = 0; 248 249 INIT_LIST_HEAD(&ndev->list); 250 refcount_set(&ndev->refcnt, 1); 251 252 mutex_lock(&devlist_lock); 253 list_for_each_entry(dev, &ndevlist, list) { 254 if (dev == ndev) { 255 ret = -EEXIST; 256 goto unlock; 257 } 258 } 259 ndev->idx = num_devices++; 260 list_add_tail(&ndev->list, &ndevlist); 261 unlock: 262 mutex_unlock(&devlist_lock); 263 return ret; 264 } 265 266 /** 267 * nitrox_remove_from_devlist - remove NITROX device from 268 * global device list 269 * @ndev: NITROX device 270 */ 271 static void nitrox_remove_from_devlist(struct nitrox_device *ndev) 272 { 273 mutex_lock(&devlist_lock); 274 list_del(&ndev->list); 275 num_devices--; 276 mutex_unlock(&devlist_lock); 277 } 278 279 struct nitrox_device *nitrox_get_first_device(void) 280 { 281 struct nitrox_device *ndev = NULL; 282 283 mutex_lock(&devlist_lock); 284 list_for_each_entry(ndev, &ndevlist, list) { 285 if (nitrox_ready(ndev)) 286 break; 287 } 288 mutex_unlock(&devlist_lock); 289 if (!ndev) 290 return NULL; 291 292 refcount_inc(&ndev->refcnt); 293 /* barrier to sync with other cpus */ 294 smp_mb__after_atomic(); 295 return ndev; 296 } 297 298 void nitrox_put_device(struct nitrox_device *ndev) 299 { 300 if (!ndev) 301 return; 302 303 refcount_dec(&ndev->refcnt); 304 /* barrier to sync with other cpus */ 305 smp_mb__after_atomic(); 306 } 307 308 static int nitrox_device_flr(struct pci_dev *pdev) 309 { 310 int pos = 0; 311 312 pos = pci_save_state(pdev); 313 if (pos) { 314 dev_err(&pdev->dev, "Failed to save pci state\n"); 315 return -ENOMEM; 316 } 317 318 /* check flr support */ 319 if (pcie_has_flr(pdev)) 320 pcie_flr(pdev); 321 322 pci_restore_state(pdev); 323 324 return 0; 325 } 326 327 static int nitrox_pf_sw_init(struct nitrox_device *ndev) 328 { 329 int err; 330 331 err = nitrox_common_sw_init(ndev); 332 if (err) 333 return err; 334 335 err = nitrox_register_interrupts(ndev); 336 if (err) 337 nitrox_common_sw_cleanup(ndev); 338 339 return err; 340 } 341 342 static void nitrox_pf_sw_cleanup(struct nitrox_device *ndev) 343 { 344 nitrox_unregister_interrupts(ndev); 345 nitrox_common_sw_cleanup(ndev); 346 } 347 348 /** 349 * nitrox_bist_check - Check NITORX BIST registers status 350 * @ndev: NITROX device 351 */ 352 static int nitrox_bist_check(struct nitrox_device *ndev) 353 { 354 u64 value = 0; 355 int i; 356 357 for (i = 0; i < NR_CLUSTERS; i++) { 358 value += nitrox_read_csr(ndev, EMU_BIST_STATUSX(i)); 359 value += nitrox_read_csr(ndev, EFL_CORE_BIST_REGX(i)); 360 } 361 value += nitrox_read_csr(ndev, UCD_BIST_STATUS); 362 value += nitrox_read_csr(ndev, NPS_CORE_BIST_REG); 363 value += nitrox_read_csr(ndev, NPS_CORE_NPC_BIST_REG); 364 value += nitrox_read_csr(ndev, NPS_PKT_SLC_BIST_REG); 365 value += nitrox_read_csr(ndev, NPS_PKT_IN_BIST_REG); 366 value += nitrox_read_csr(ndev, POM_BIST_REG); 367 value += nitrox_read_csr(ndev, BMI_BIST_REG); 368 value += nitrox_read_csr(ndev, EFL_TOP_BIST_STAT); 369 value += nitrox_read_csr(ndev, BMO_BIST_REG); 370 value += nitrox_read_csr(ndev, LBC_BIST_STATUS); 371 value += nitrox_read_csr(ndev, PEM_BIST_STATUSX(0)); 372 if (value) 373 return -EIO; 374 return 0; 375 } 376 377 static int nitrox_pf_hw_init(struct nitrox_device *ndev) 378 { 379 int err; 380 381 err = nitrox_bist_check(ndev); 382 if (err) { 383 dev_err(&ndev->pdev->dev, "BIST check failed\n"); 384 return err; 385 } 386 /* get cores information */ 387 nitrox_get_hwinfo(ndev); 388 389 nitrox_config_nps_core_unit(ndev); 390 nitrox_config_aqm_unit(ndev); 391 nitrox_config_nps_pkt_unit(ndev); 392 nitrox_config_pom_unit(ndev); 393 nitrox_config_efl_unit(ndev); 394 /* configure IO units */ 395 nitrox_config_bmi_unit(ndev); 396 nitrox_config_bmo_unit(ndev); 397 /* configure Local Buffer Cache */ 398 nitrox_config_lbc_unit(ndev); 399 nitrox_config_rand_unit(ndev); 400 401 /* load firmware on cores */ 402 err = nitrox_load_fw(ndev); 403 if (err) 404 return err; 405 406 nitrox_config_emu_unit(ndev); 407 408 return 0; 409 } 410 411 /** 412 * nitrox_probe - NITROX Initialization function. 413 * @pdev: PCI device information struct 414 * @id: entry in nitrox_pci_tbl 415 * 416 * Return: 0, if the driver is bound to the device, or 417 * a negative error if there is failure. 418 */ 419 static int nitrox_probe(struct pci_dev *pdev, 420 const struct pci_device_id *id) 421 { 422 struct nitrox_device *ndev; 423 int err; 424 425 dev_info_once(&pdev->dev, "%s driver version %s\n", 426 nitrox_driver_name, DRIVER_VERSION); 427 428 err = pci_enable_device_mem(pdev); 429 if (err) 430 return err; 431 432 /* do FLR */ 433 err = nitrox_device_flr(pdev); 434 if (err) { 435 dev_err(&pdev->dev, "FLR failed\n"); 436 pci_disable_device(pdev); 437 return err; 438 } 439 440 if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { 441 dev_dbg(&pdev->dev, "DMA to 64-BIT address\n"); 442 } else { 443 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 444 if (err) { 445 dev_err(&pdev->dev, "DMA configuration failed\n"); 446 pci_disable_device(pdev); 447 return err; 448 } 449 } 450 451 err = pci_request_mem_regions(pdev, nitrox_driver_name); 452 if (err) { 453 pci_disable_device(pdev); 454 return err; 455 } 456 pci_set_master(pdev); 457 458 ndev = kzalloc(sizeof(*ndev), GFP_KERNEL); 459 if (!ndev) { 460 err = -ENOMEM; 461 goto ndev_fail; 462 } 463 464 pci_set_drvdata(pdev, ndev); 465 ndev->pdev = pdev; 466 467 /* add to device list */ 468 nitrox_add_to_devlist(ndev); 469 470 ndev->hw.vendor_id = pdev->vendor; 471 ndev->hw.device_id = pdev->device; 472 ndev->hw.revision_id = pdev->revision; 473 /* command timeout in jiffies */ 474 ndev->timeout = msecs_to_jiffies(CMD_TIMEOUT); 475 ndev->node = dev_to_node(&pdev->dev); 476 if (ndev->node == NUMA_NO_NODE) 477 ndev->node = 0; 478 479 ndev->bar_addr = ioremap(pci_resource_start(pdev, 0), 480 pci_resource_len(pdev, 0)); 481 if (!ndev->bar_addr) { 482 err = -EIO; 483 goto ioremap_err; 484 } 485 /* allocate command queus based on cpus, max queues are 64 */ 486 ndev->nr_queues = min_t(u32, MAX_PF_QUEUES, num_online_cpus()); 487 ndev->qlen = qlen; 488 489 err = nitrox_pf_sw_init(ndev); 490 if (err) 491 goto ioremap_err; 492 493 err = nitrox_pf_hw_init(ndev); 494 if (err) 495 goto pf_hw_fail; 496 497 nitrox_debugfs_init(ndev); 498 499 /* clear the statistics */ 500 atomic64_set(&ndev->stats.posted, 0); 501 atomic64_set(&ndev->stats.completed, 0); 502 atomic64_set(&ndev->stats.dropped, 0); 503 504 atomic_set(&ndev->state, __NDEV_READY); 505 /* barrier to sync with other cpus */ 506 smp_mb__after_atomic(); 507 508 err = nitrox_crypto_register(); 509 if (err) 510 goto crypto_fail; 511 512 return 0; 513 514 crypto_fail: 515 nitrox_debugfs_exit(ndev); 516 atomic_set(&ndev->state, __NDEV_NOT_READY); 517 /* barrier to sync with other cpus */ 518 smp_mb__after_atomic(); 519 pf_hw_fail: 520 nitrox_pf_sw_cleanup(ndev); 521 ioremap_err: 522 nitrox_remove_from_devlist(ndev); 523 kfree(ndev); 524 pci_set_drvdata(pdev, NULL); 525 ndev_fail: 526 pci_release_mem_regions(pdev); 527 pci_disable_device(pdev); 528 return err; 529 } 530 531 /** 532 * nitrox_remove - Unbind the driver from the device. 533 * @pdev: PCI device information struct 534 */ 535 static void nitrox_remove(struct pci_dev *pdev) 536 { 537 struct nitrox_device *ndev = pci_get_drvdata(pdev); 538 539 if (!ndev) 540 return; 541 542 if (!refcount_dec_and_test(&ndev->refcnt)) { 543 dev_err(DEV(ndev), "Device refcnt not zero (%d)\n", 544 refcount_read(&ndev->refcnt)); 545 return; 546 } 547 548 dev_info(DEV(ndev), "Removing Device %x:%x\n", 549 ndev->hw.vendor_id, ndev->hw.device_id); 550 551 atomic_set(&ndev->state, __NDEV_NOT_READY); 552 /* barrier to sync with other cpus */ 553 smp_mb__after_atomic(); 554 555 nitrox_remove_from_devlist(ndev); 556 557 #ifdef CONFIG_PCI_IOV 558 /* disable SR-IOV */ 559 nitrox_sriov_configure(pdev, 0); 560 #endif 561 nitrox_crypto_unregister(); 562 nitrox_debugfs_exit(ndev); 563 nitrox_pf_sw_cleanup(ndev); 564 565 iounmap(ndev->bar_addr); 566 kfree(ndev); 567 568 pci_set_drvdata(pdev, NULL); 569 pci_release_mem_regions(pdev); 570 pci_disable_device(pdev); 571 } 572 573 static void nitrox_shutdown(struct pci_dev *pdev) 574 { 575 pci_set_drvdata(pdev, NULL); 576 pci_release_mem_regions(pdev); 577 pci_disable_device(pdev); 578 } 579 580 static struct pci_driver nitrox_driver = { 581 .name = nitrox_driver_name, 582 .id_table = nitrox_pci_tbl, 583 .probe = nitrox_probe, 584 .remove = nitrox_remove, 585 .shutdown = nitrox_shutdown, 586 #ifdef CONFIG_PCI_IOV 587 .sriov_configure = nitrox_sriov_configure, 588 #endif 589 }; 590 591 module_pci_driver(nitrox_driver); 592 593 MODULE_AUTHOR("Srikanth Jampala <Jampala.Srikanth@cavium.com>"); 594 MODULE_DESCRIPTION("Cavium CNN55XX PF Driver" DRIVER_VERSION " "); 595 MODULE_LICENSE("GPL"); 596 MODULE_VERSION(DRIVER_VERSION); 597 MODULE_FIRMWARE(SE_FW); 598