1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller. 4 * 5 * Copyright (c) 2008 Wind River Systems, Inc. 6 * 7 * Authors: Cao Qingtao <qingtao.cao@windriver.com> 8 */ 9 10 #include <linux/module.h> 11 #include <linux/init.h> 12 #include <linux/io.h> 13 #include <linux/edac.h> 14 #include <linux/of.h> 15 #include <linux/platform_device.h> 16 #include <linux/gfp.h> 17 18 #include "edac_module.h" 19 20 #define CPC925_EDAC_REVISION " Ver: 1.0.0" 21 #define CPC925_EDAC_MOD_STR "cpc925_edac" 22 23 #define cpc925_printk(level, fmt, arg...) \ 24 edac_printk(level, "CPC925", fmt, ##arg) 25 26 #define cpc925_mc_printk(mci, level, fmt, arg...) \ 27 edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg) 28 29 /* 30 * CPC925 registers are of 32 bits with bit0 defined at the 31 * most significant bit and bit31 at that of least significant. 32 */ 33 #define CPC925_BITS_PER_REG 32 34 #define CPC925_BIT(nr) (1UL << (CPC925_BITS_PER_REG - 1 - nr)) 35 36 /* 37 * EDAC device names for the error detections of 38 * CPU Interface and Hypertransport Link. 39 */ 40 #define CPC925_CPU_ERR_DEV "cpu" 41 #define CPC925_HT_LINK_DEV "htlink" 42 43 /* Suppose DDR Refresh cycle is 15.6 microsecond */ 44 #define CPC925_REF_FREQ 0xFA69 45 #define CPC925_SCRUB_BLOCK_SIZE 64 /* bytes */ 46 #define CPC925_NR_CSROWS 8 47 48 /* 49 * All registers and bits definitions are taken from 50 * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02". 51 */ 52 53 /* 54 * CPU and Memory Controller Registers 55 */ 56 /************************************************************ 57 * Processor Interface Exception Mask Register (APIMASK) 58 ************************************************************/ 59 #define REG_APIMASK_OFFSET 0x30070 60 enum apimask_bits { 61 APIMASK_DART = CPC925_BIT(0), /* DART Exception */ 62 APIMASK_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ 63 APIMASK_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ 64 APIMASK_STAT = CPC925_BIT(3), /* Status Exception */ 65 APIMASK_DERR = CPC925_BIT(4), /* Data Error Exception */ 66 APIMASK_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ 67 APIMASK_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ 68 /* BIT(7) Reserved */ 69 APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ 70 APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ 71 APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ 72 APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ 73 74 CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 | 75 APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 | 76 APIMASK_ADRS1), 77 ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H | 78 APIMASK_ECC_UE_L | APIMASK_ECC_CE_L), 79 }; 80 #define APIMASK_ADI(n) CPC925_BIT(((n)+1)) 81 82 /************************************************************ 83 * Processor Interface Exception Register (APIEXCP) 84 ************************************************************/ 85 #define REG_APIEXCP_OFFSET 0x30060 86 enum apiexcp_bits { 87 APIEXCP_DART = CPC925_BIT(0), /* DART Exception */ 88 APIEXCP_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ 89 APIEXCP_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ 90 APIEXCP_STAT = CPC925_BIT(3), /* Status Exception */ 91 APIEXCP_DERR = CPC925_BIT(4), /* Data Error Exception */ 92 APIEXCP_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ 93 APIEXCP_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ 94 /* BIT(7) Reserved */ 95 APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ 96 APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ 97 APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ 98 APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ 99 100 CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 | 101 APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 | 102 APIEXCP_ADRS1), 103 UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L), 104 CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L), 105 ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED), 106 }; 107 108 /************************************************************ 109 * Memory Bus Configuration Register (MBCR) 110 ************************************************************/ 111 #define REG_MBCR_OFFSET 0x2190 112 #define MBCR_64BITCFG_SHIFT 23 113 #define MBCR_64BITCFG_MASK (1UL << MBCR_64BITCFG_SHIFT) 114 #define MBCR_64BITBUS_SHIFT 22 115 #define MBCR_64BITBUS_MASK (1UL << MBCR_64BITBUS_SHIFT) 116 117 /************************************************************ 118 * Memory Bank Mode Register (MBMR) 119 ************************************************************/ 120 #define REG_MBMR_OFFSET 0x21C0 121 #define MBMR_MODE_MAX_VALUE 0xF 122 #define MBMR_MODE_SHIFT 25 123 #define MBMR_MODE_MASK (MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT) 124 #define MBMR_BBA_SHIFT 24 125 #define MBMR_BBA_MASK (1UL << MBMR_BBA_SHIFT) 126 127 /************************************************************ 128 * Memory Bank Boundary Address Register (MBBAR) 129 ************************************************************/ 130 #define REG_MBBAR_OFFSET 0x21D0 131 #define MBBAR_BBA_MAX_VALUE 0xFF 132 #define MBBAR_BBA_SHIFT 24 133 #define MBBAR_BBA_MASK (MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT) 134 135 /************************************************************ 136 * Memory Scrub Control Register (MSCR) 137 ************************************************************/ 138 #define REG_MSCR_OFFSET 0x2400 139 #define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/ 140 #define MSCR_BACKGR_SCRUB 0x40000000 /* 01 */ 141 #define MSCR_SI_SHIFT 16 /* si - bit8:15*/ 142 #define MSCR_SI_MAX_VALUE 0xFF 143 #define MSCR_SI_MASK (MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT) 144 145 /************************************************************ 146 * Memory Scrub Range Start Register (MSRSR) 147 ************************************************************/ 148 #define REG_MSRSR_OFFSET 0x2410 149 150 /************************************************************ 151 * Memory Scrub Range End Register (MSRER) 152 ************************************************************/ 153 #define REG_MSRER_OFFSET 0x2420 154 155 /************************************************************ 156 * Memory Scrub Pattern Register (MSPR) 157 ************************************************************/ 158 #define REG_MSPR_OFFSET 0x2430 159 160 /************************************************************ 161 * Memory Check Control Register (MCCR) 162 ************************************************************/ 163 #define REG_MCCR_OFFSET 0x2440 164 enum mccr_bits { 165 MCCR_ECC_EN = CPC925_BIT(0), /* ECC high and low check */ 166 }; 167 168 /************************************************************ 169 * Memory Check Range End Register (MCRER) 170 ************************************************************/ 171 #define REG_MCRER_OFFSET 0x2450 172 173 /************************************************************ 174 * Memory Error Address Register (MEAR) 175 ************************************************************/ 176 #define REG_MEAR_OFFSET 0x2460 177 #define MEAR_BCNT_MAX_VALUE 0x3 178 #define MEAR_BCNT_SHIFT 30 179 #define MEAR_BCNT_MASK (MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT) 180 #define MEAR_RANK_MAX_VALUE 0x7 181 #define MEAR_RANK_SHIFT 27 182 #define MEAR_RANK_MASK (MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT) 183 #define MEAR_COL_MAX_VALUE 0x7FF 184 #define MEAR_COL_SHIFT 16 185 #define MEAR_COL_MASK (MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT) 186 #define MEAR_BANK_MAX_VALUE 0x3 187 #define MEAR_BANK_SHIFT 14 188 #define MEAR_BANK_MASK (MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT) 189 #define MEAR_ROW_MASK 0x00003FFF 190 191 /************************************************************ 192 * Memory Error Syndrome Register (MESR) 193 ************************************************************/ 194 #define REG_MESR_OFFSET 0x2470 195 #define MESR_ECC_SYN_H_MASK 0xFF00 196 #define MESR_ECC_SYN_L_MASK 0x00FF 197 198 /************************************************************ 199 * Memory Mode Control Register (MMCR) 200 ************************************************************/ 201 #define REG_MMCR_OFFSET 0x2500 202 enum mmcr_bits { 203 MMCR_REG_DIMM_MODE = CPC925_BIT(3), 204 }; 205 206 /* 207 * HyperTransport Link Registers 208 */ 209 /************************************************************ 210 * Error Handling/Enumeration Scratch Pad Register (ERRCTRL) 211 ************************************************************/ 212 #define REG_ERRCTRL_OFFSET 0x70140 213 enum errctrl_bits { /* nonfatal interrupts for */ 214 ERRCTRL_SERR_NF = CPC925_BIT(0), /* system error */ 215 ERRCTRL_CRC_NF = CPC925_BIT(1), /* CRC error */ 216 ERRCTRL_RSP_NF = CPC925_BIT(2), /* Response error */ 217 ERRCTRL_EOC_NF = CPC925_BIT(3), /* End-Of-Chain error */ 218 ERRCTRL_OVF_NF = CPC925_BIT(4), /* Overflow error */ 219 ERRCTRL_PROT_NF = CPC925_BIT(5), /* Protocol error */ 220 221 ERRCTRL_RSP_ERR = CPC925_BIT(6), /* Response error received */ 222 ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */ 223 224 HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF | 225 ERRCTRL_RSP_NF | ERRCTRL_EOC_NF | 226 ERRCTRL_OVF_NF | ERRCTRL_PROT_NF), 227 HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL), 228 }; 229 230 /************************************************************ 231 * Link Configuration and Link Control Register (LINKCTRL) 232 ************************************************************/ 233 #define REG_LINKCTRL_OFFSET 0x70110 234 enum linkctrl_bits { 235 LINKCTRL_CRC_ERR = (CPC925_BIT(22) | CPC925_BIT(23)), 236 LINKCTRL_LINK_FAIL = CPC925_BIT(27), 237 238 HT_LINKCTRL_DETECTED = (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL), 239 }; 240 241 /************************************************************ 242 * Link FreqCap/Error/Freq/Revision ID Register (LINKERR) 243 ************************************************************/ 244 #define REG_LINKERR_OFFSET 0x70120 245 enum linkerr_bits { 246 LINKERR_EOC_ERR = CPC925_BIT(17), /* End-Of-Chain error */ 247 LINKERR_OVF_ERR = CPC925_BIT(18), /* Receive Buffer Overflow */ 248 LINKERR_PROT_ERR = CPC925_BIT(19), /* Protocol error */ 249 250 HT_LINKERR_DETECTED = (LINKERR_EOC_ERR | LINKERR_OVF_ERR | 251 LINKERR_PROT_ERR), 252 }; 253 254 /************************************************************ 255 * Bridge Control Register (BRGCTRL) 256 ************************************************************/ 257 #define REG_BRGCTRL_OFFSET 0x70300 258 enum brgctrl_bits { 259 BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */ 260 BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */ 261 }; 262 263 /* Private structure for edac memory controller */ 264 struct cpc925_mc_pdata { 265 void __iomem *vbase; 266 unsigned long total_mem; 267 const char *name; 268 int edac_idx; 269 }; 270 271 /* Private structure for common edac device */ 272 struct cpc925_dev_info { 273 void __iomem *vbase; 274 struct platform_device *pdev; 275 char *ctl_name; 276 int edac_idx; 277 struct edac_device_ctl_info *edac_dev; 278 void (*init)(struct cpc925_dev_info *dev_info); 279 void (*exit)(struct cpc925_dev_info *dev_info); 280 void (*check)(struct edac_device_ctl_info *edac_dev); 281 }; 282 283 /* Get total memory size from Open Firmware DTB */ 284 static void get_total_mem(struct cpc925_mc_pdata *pdata) 285 { 286 struct device_node *np = NULL; 287 const unsigned int *reg, *reg_end; 288 int len, sw, aw; 289 unsigned long start, size; 290 291 np = of_find_node_by_type(NULL, "memory"); 292 if (!np) 293 return; 294 295 aw = of_n_addr_cells(np); 296 sw = of_n_size_cells(np); 297 reg = (const unsigned int *)of_get_property(np, "reg", &len); 298 reg_end = reg + len/4; 299 300 pdata->total_mem = 0; 301 do { 302 start = of_read_number(reg, aw); 303 reg += aw; 304 size = of_read_number(reg, sw); 305 reg += sw; 306 edac_dbg(1, "start 0x%lx, size 0x%lx\n", start, size); 307 pdata->total_mem += size; 308 } while (reg < reg_end); 309 310 of_node_put(np); 311 edac_dbg(0, "total_mem 0x%lx\n", pdata->total_mem); 312 } 313 314 static void cpc925_init_csrows(struct mem_ctl_info *mci) 315 { 316 struct cpc925_mc_pdata *pdata = mci->pvt_info; 317 struct csrow_info *csrow; 318 struct dimm_info *dimm; 319 enum dev_type dtype; 320 int index, j; 321 u32 mbmr, mbbar, bba, grain; 322 unsigned long row_size, nr_pages, last_nr_pages = 0; 323 324 get_total_mem(pdata); 325 326 for (index = 0; index < mci->nr_csrows; index++) { 327 mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET + 328 0x20 * index); 329 mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET + 330 0x20 + index); 331 bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) | 332 ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT); 333 334 if (bba == 0) 335 continue; /* not populated */ 336 337 csrow = mci->csrows[index]; 338 339 row_size = bba * (1UL << 28); /* 256M */ 340 csrow->first_page = last_nr_pages; 341 nr_pages = row_size >> PAGE_SHIFT; 342 csrow->last_page = csrow->first_page + nr_pages - 1; 343 last_nr_pages = csrow->last_page + 1; 344 345 switch (csrow->nr_channels) { 346 case 1: /* Single channel */ 347 grain = 32; /* four-beat burst of 32 bytes */ 348 break; 349 case 2: /* Dual channel */ 350 default: 351 grain = 64; /* four-beat burst of 64 bytes */ 352 break; 353 } 354 switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) { 355 case 6: /* 0110, no way to differentiate X8 VS X16 */ 356 case 5: /* 0101 */ 357 case 8: /* 1000 */ 358 dtype = DEV_X16; 359 break; 360 case 7: /* 0111 */ 361 case 9: /* 1001 */ 362 dtype = DEV_X8; 363 break; 364 default: 365 dtype = DEV_UNKNOWN; 366 break; 367 } 368 for (j = 0; j < csrow->nr_channels; j++) { 369 dimm = csrow->channels[j]->dimm; 370 dimm->nr_pages = nr_pages / csrow->nr_channels; 371 dimm->mtype = MEM_RDDR; 372 dimm->edac_mode = EDAC_SECDED; 373 dimm->grain = grain; 374 dimm->dtype = dtype; 375 } 376 } 377 } 378 379 /* Enable memory controller ECC detection */ 380 static void cpc925_mc_init(struct mem_ctl_info *mci) 381 { 382 struct cpc925_mc_pdata *pdata = mci->pvt_info; 383 u32 apimask; 384 u32 mccr; 385 386 /* Enable various ECC error exceptions */ 387 apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET); 388 if ((apimask & ECC_MASK_ENABLE) == 0) { 389 apimask |= ECC_MASK_ENABLE; 390 __raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET); 391 } 392 393 /* Enable ECC detection */ 394 mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET); 395 if ((mccr & MCCR_ECC_EN) == 0) { 396 mccr |= MCCR_ECC_EN; 397 __raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET); 398 } 399 } 400 401 /* Disable memory controller ECC detection */ 402 static void cpc925_mc_exit(struct mem_ctl_info *mci) 403 { 404 /* 405 * WARNING: 406 * We are supposed to clear the ECC error detection bits, 407 * and it will be no problem to do so. However, once they 408 * are cleared here if we want to re-install CPC925 EDAC 409 * module later, setting them up in cpc925_mc_init() will 410 * trigger machine check exception. 411 * Also, it's ok to leave ECC error detection bits enabled, 412 * since they are reset to 1 by default or by boot loader. 413 */ 414 415 return; 416 } 417 418 /* 419 * Revert DDR column/row/bank addresses into page frame number and 420 * offset in page. 421 * 422 * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs), 423 * physical address(PA) bits to column address(CA) bits mappings are: 424 * CA 0 1 2 3 4 5 6 7 8 9 10 425 * PA 59 58 57 56 55 54 53 52 51 50 49 426 * 427 * physical address(PA) bits to bank address(BA) bits mappings are: 428 * BA 0 1 429 * PA 43 44 430 * 431 * physical address(PA) bits to row address(RA) bits mappings are: 432 * RA 0 1 2 3 4 5 6 7 8 9 10 11 12 433 * PA 36 35 34 48 47 46 45 40 41 42 39 38 37 434 */ 435 static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear, 436 unsigned long *pfn, unsigned long *offset, int *csrow) 437 { 438 u32 bcnt, rank, col, bank, row; 439 u32 c; 440 unsigned long pa; 441 int i; 442 443 bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT; 444 rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT; 445 col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT; 446 bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT; 447 row = mear & MEAR_ROW_MASK; 448 449 *csrow = rank; 450 451 #ifdef CONFIG_EDAC_DEBUG 452 if (mci->csrows[rank]->first_page == 0) { 453 cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a " 454 "non-populated csrow, broken hardware?\n"); 455 return; 456 } 457 #endif 458 459 /* Revert csrow number */ 460 pa = mci->csrows[rank]->first_page << PAGE_SHIFT; 461 462 /* Revert column address */ 463 col += bcnt; 464 for (i = 0; i < 11; i++) { 465 c = col & 0x1; 466 col >>= 1; 467 pa |= c << (14 - i); 468 } 469 470 /* Revert bank address */ 471 pa |= bank << 19; 472 473 /* Revert row address, in 4 steps */ 474 for (i = 0; i < 3; i++) { 475 c = row & 0x1; 476 row >>= 1; 477 pa |= c << (26 - i); 478 } 479 480 for (i = 0; i < 3; i++) { 481 c = row & 0x1; 482 row >>= 1; 483 pa |= c << (21 + i); 484 } 485 486 for (i = 0; i < 4; i++) { 487 c = row & 0x1; 488 row >>= 1; 489 pa |= c << (18 - i); 490 } 491 492 for (i = 0; i < 3; i++) { 493 c = row & 0x1; 494 row >>= 1; 495 pa |= c << (29 - i); 496 } 497 498 *offset = pa & (PAGE_SIZE - 1); 499 *pfn = pa >> PAGE_SHIFT; 500 501 edac_dbg(0, "ECC physical address 0x%lx\n", pa); 502 } 503 504 static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome) 505 { 506 if ((syndrome & MESR_ECC_SYN_H_MASK) == 0) 507 return 0; 508 509 if ((syndrome & MESR_ECC_SYN_L_MASK) == 0) 510 return 1; 511 512 cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n", 513 syndrome); 514 return 1; 515 } 516 517 /* Check memory controller registers for ECC errors */ 518 static void cpc925_mc_check(struct mem_ctl_info *mci) 519 { 520 struct cpc925_mc_pdata *pdata = mci->pvt_info; 521 u32 apiexcp; 522 u32 mear; 523 u32 mesr; 524 u16 syndrome; 525 unsigned long pfn = 0, offset = 0; 526 int csrow = 0, channel = 0; 527 528 /* APIEXCP is cleared when read */ 529 apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET); 530 if ((apiexcp & ECC_EXCP_DETECTED) == 0) 531 return; 532 533 mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET); 534 syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK); 535 536 mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET); 537 538 /* Revert column/row addresses into page frame number, etc */ 539 cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow); 540 541 if (apiexcp & CECC_EXCP_DETECTED) { 542 cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n"); 543 channel = cpc925_mc_find_channel(mci, syndrome); 544 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 545 pfn, offset, syndrome, 546 csrow, channel, -1, 547 mci->ctl_name, ""); 548 } 549 550 if (apiexcp & UECC_EXCP_DETECTED) { 551 cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n"); 552 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 553 pfn, offset, 0, 554 csrow, -1, -1, 555 mci->ctl_name, ""); 556 } 557 558 cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n"); 559 cpc925_mc_printk(mci, KERN_INFO, "APIMASK 0x%08x\n", 560 __raw_readl(pdata->vbase + REG_APIMASK_OFFSET)); 561 cpc925_mc_printk(mci, KERN_INFO, "APIEXCP 0x%08x\n", 562 apiexcp); 563 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl 0x%08x\n", 564 __raw_readl(pdata->vbase + REG_MSCR_OFFSET)); 565 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start 0x%08x\n", 566 __raw_readl(pdata->vbase + REG_MSRSR_OFFSET)); 567 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End 0x%08x\n", 568 __raw_readl(pdata->vbase + REG_MSRER_OFFSET)); 569 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern 0x%08x\n", 570 __raw_readl(pdata->vbase + REG_MSPR_OFFSET)); 571 cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl 0x%08x\n", 572 __raw_readl(pdata->vbase + REG_MCCR_OFFSET)); 573 cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End 0x%08x\n", 574 __raw_readl(pdata->vbase + REG_MCRER_OFFSET)); 575 cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address 0x%08x\n", 576 mesr); 577 cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome 0x%08x\n", 578 syndrome); 579 } 580 581 /******************** CPU err device********************************/ 582 static u32 cpc925_cpu_mask_disabled(void) 583 { 584 struct device_node *cpunode; 585 static u32 mask = 0; 586 587 /* use cached value if available */ 588 if (mask != 0) 589 return mask; 590 591 mask = APIMASK_ADI0 | APIMASK_ADI1; 592 593 for_each_of_cpu_node(cpunode) { 594 const u32 *reg = of_get_property(cpunode, "reg", NULL); 595 if (reg == NULL || *reg > 2) { 596 cpc925_printk(KERN_ERR, "Bad reg value at %pOF\n", cpunode); 597 continue; 598 } 599 600 mask &= ~APIMASK_ADI(*reg); 601 } 602 603 if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) { 604 /* We assume that each CPU sits on it's own PI and that 605 * for present CPUs the reg property equals to the PI 606 * interface id */ 607 cpc925_printk(KERN_WARNING, 608 "Assuming PI id is equal to CPU MPIC id!\n"); 609 } 610 611 return mask; 612 } 613 614 /* Enable CPU Errors detection */ 615 static void cpc925_cpu_init(struct cpc925_dev_info *dev_info) 616 { 617 u32 apimask; 618 u32 cpumask; 619 620 apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); 621 622 cpumask = cpc925_cpu_mask_disabled(); 623 if (apimask & cpumask) { 624 cpc925_printk(KERN_WARNING, "CPU(s) not present, " 625 "but enabled in APIMASK, disabling\n"); 626 apimask &= ~cpumask; 627 } 628 629 if ((apimask & CPU_MASK_ENABLE) == 0) 630 apimask |= CPU_MASK_ENABLE; 631 632 __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET); 633 } 634 635 /* Disable CPU Errors detection */ 636 static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info) 637 { 638 /* 639 * WARNING: 640 * We are supposed to clear the CPU error detection bits, 641 * and it will be no problem to do so. However, once they 642 * are cleared here if we want to re-install CPC925 EDAC 643 * module later, setting them up in cpc925_cpu_init() will 644 * trigger machine check exception. 645 * Also, it's ok to leave CPU error detection bits enabled, 646 * since they are reset to 1 by default. 647 */ 648 649 return; 650 } 651 652 /* Check for CPU Errors */ 653 static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev) 654 { 655 struct cpc925_dev_info *dev_info = edac_dev->pvt_info; 656 u32 apiexcp; 657 u32 apimask; 658 659 /* APIEXCP is cleared when read */ 660 apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET); 661 if ((apiexcp & CPU_EXCP_DETECTED) == 0) 662 return; 663 664 if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0) 665 return; 666 667 apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); 668 cpc925_printk(KERN_INFO, "Processor Interface Fault\n" 669 "Processor Interface register dump:\n"); 670 cpc925_printk(KERN_INFO, "APIMASK 0x%08x\n", apimask); 671 cpc925_printk(KERN_INFO, "APIEXCP 0x%08x\n", apiexcp); 672 673 edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); 674 } 675 676 /******************** HT Link err device****************************/ 677 /* Enable HyperTransport Link Error detection */ 678 static void cpc925_htlink_init(struct cpc925_dev_info *dev_info) 679 { 680 u32 ht_errctrl; 681 682 ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); 683 if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) { 684 ht_errctrl |= HT_ERRCTRL_ENABLE; 685 __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); 686 } 687 } 688 689 /* Disable HyperTransport Link Error detection */ 690 static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info) 691 { 692 u32 ht_errctrl; 693 694 ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); 695 ht_errctrl &= ~HT_ERRCTRL_ENABLE; 696 __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); 697 } 698 699 /* Check for HyperTransport Link errors */ 700 static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev) 701 { 702 struct cpc925_dev_info *dev_info = edac_dev->pvt_info; 703 u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET); 704 u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET); 705 u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); 706 u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET); 707 708 if (!((brgctrl & BRGCTRL_DETSERR) || 709 (linkctrl & HT_LINKCTRL_DETECTED) || 710 (errctrl & HT_ERRCTRL_DETECTED) || 711 (linkerr & HT_LINKERR_DETECTED))) 712 return; 713 714 cpc925_printk(KERN_INFO, "HT Link Fault\n" 715 "HT register dump:\n"); 716 cpc925_printk(KERN_INFO, "Bridge Ctrl 0x%08x\n", 717 brgctrl); 718 cpc925_printk(KERN_INFO, "Link Config Ctrl 0x%08x\n", 719 linkctrl); 720 cpc925_printk(KERN_INFO, "Error Enum and Ctrl 0x%08x\n", 721 errctrl); 722 cpc925_printk(KERN_INFO, "Link Error 0x%08x\n", 723 linkerr); 724 725 /* Clear by write 1 */ 726 if (brgctrl & BRGCTRL_DETSERR) 727 __raw_writel(BRGCTRL_DETSERR, 728 dev_info->vbase + REG_BRGCTRL_OFFSET); 729 730 if (linkctrl & HT_LINKCTRL_DETECTED) 731 __raw_writel(HT_LINKCTRL_DETECTED, 732 dev_info->vbase + REG_LINKCTRL_OFFSET); 733 734 /* Initiate Secondary Bus Reset to clear the chain failure */ 735 if (errctrl & ERRCTRL_CHN_FAL) 736 __raw_writel(BRGCTRL_SECBUSRESET, 737 dev_info->vbase + REG_BRGCTRL_OFFSET); 738 739 if (errctrl & ERRCTRL_RSP_ERR) 740 __raw_writel(ERRCTRL_RSP_ERR, 741 dev_info->vbase + REG_ERRCTRL_OFFSET); 742 743 if (linkerr & HT_LINKERR_DETECTED) 744 __raw_writel(HT_LINKERR_DETECTED, 745 dev_info->vbase + REG_LINKERR_OFFSET); 746 747 edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); 748 } 749 750 static struct cpc925_dev_info cpc925_devs[] = { 751 { 752 .ctl_name = CPC925_CPU_ERR_DEV, 753 .init = cpc925_cpu_init, 754 .exit = cpc925_cpu_exit, 755 .check = cpc925_cpu_check, 756 }, 757 { 758 .ctl_name = CPC925_HT_LINK_DEV, 759 .init = cpc925_htlink_init, 760 .exit = cpc925_htlink_exit, 761 .check = cpc925_htlink_check, 762 }, 763 { } 764 }; 765 766 /* 767 * Add CPU Err detection and HyperTransport Link Err detection 768 * as common "edac_device", they have no corresponding device 769 * nodes in the Open Firmware DTB and we have to add platform 770 * devices for them. Also, they will share the MMIO with that 771 * of memory controller. 772 */ 773 static void cpc925_add_edac_devices(void __iomem *vbase) 774 { 775 struct cpc925_dev_info *dev_info; 776 777 if (!vbase) { 778 cpc925_printk(KERN_ERR, "MMIO not established yet\n"); 779 return; 780 } 781 782 for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { 783 dev_info->vbase = vbase; 784 dev_info->pdev = platform_device_register_simple( 785 dev_info->ctl_name, 0, NULL, 0); 786 if (IS_ERR(dev_info->pdev)) { 787 cpc925_printk(KERN_ERR, 788 "Can't register platform device for %s\n", 789 dev_info->ctl_name); 790 continue; 791 } 792 793 /* 794 * Don't have to allocate private structure but 795 * make use of cpc925_devs[] instead. 796 */ 797 dev_info->edac_idx = edac_device_alloc_index(); 798 dev_info->edac_dev = 799 edac_device_alloc_ctl_info(0, dev_info->ctl_name, 800 1, NULL, 0, 0, NULL, 0, dev_info->edac_idx); 801 if (!dev_info->edac_dev) { 802 cpc925_printk(KERN_ERR, "No memory for edac device\n"); 803 goto err1; 804 } 805 806 dev_info->edac_dev->pvt_info = dev_info; 807 dev_info->edac_dev->dev = &dev_info->pdev->dev; 808 dev_info->edac_dev->ctl_name = dev_info->ctl_name; 809 dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR; 810 dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev); 811 812 if (edac_op_state == EDAC_OPSTATE_POLL) 813 dev_info->edac_dev->edac_check = dev_info->check; 814 815 if (dev_info->init) 816 dev_info->init(dev_info); 817 818 if (edac_device_add_device(dev_info->edac_dev) > 0) { 819 cpc925_printk(KERN_ERR, 820 "Unable to add edac device for %s\n", 821 dev_info->ctl_name); 822 goto err2; 823 } 824 825 edac_dbg(0, "Successfully added edac device for %s\n", 826 dev_info->ctl_name); 827 828 continue; 829 830 err2: 831 if (dev_info->exit) 832 dev_info->exit(dev_info); 833 edac_device_free_ctl_info(dev_info->edac_dev); 834 err1: 835 platform_device_unregister(dev_info->pdev); 836 } 837 } 838 839 /* 840 * Delete the common "edac_device" for CPU Err Detection 841 * and HyperTransport Link Err Detection 842 */ 843 static void cpc925_del_edac_devices(void) 844 { 845 struct cpc925_dev_info *dev_info; 846 847 for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { 848 if (dev_info->edac_dev) { 849 edac_device_del_device(dev_info->edac_dev->dev); 850 edac_device_free_ctl_info(dev_info->edac_dev); 851 platform_device_unregister(dev_info->pdev); 852 } 853 854 if (dev_info->exit) 855 dev_info->exit(dev_info); 856 857 edac_dbg(0, "Successfully deleted edac device for %s\n", 858 dev_info->ctl_name); 859 } 860 } 861 862 /* Convert current back-ground scrub rate into byte/sec bandwidth */ 863 static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci) 864 { 865 struct cpc925_mc_pdata *pdata = mci->pvt_info; 866 int bw; 867 u32 mscr; 868 u8 si; 869 870 mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET); 871 si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT; 872 873 edac_dbg(0, "Mem Scrub Ctrl Register 0x%x\n", mscr); 874 875 if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) || 876 (si == 0)) { 877 cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n"); 878 bw = 0; 879 } else 880 bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si; 881 882 return bw; 883 } 884 885 /* Return 0 for single channel; 1 for dual channel */ 886 static int cpc925_mc_get_channels(void __iomem *vbase) 887 { 888 int dual = 0; 889 u32 mbcr; 890 891 mbcr = __raw_readl(vbase + REG_MBCR_OFFSET); 892 893 /* 894 * Dual channel only when 128-bit wide physical bus 895 * and 128-bit configuration. 896 */ 897 if (((mbcr & MBCR_64BITCFG_MASK) == 0) && 898 ((mbcr & MBCR_64BITBUS_MASK) == 0)) 899 dual = 1; 900 901 edac_dbg(0, "%s channel\n", (dual > 0) ? "Dual" : "Single"); 902 903 return dual; 904 } 905 906 static int cpc925_probe(struct platform_device *pdev) 907 { 908 static int edac_mc_idx; 909 struct mem_ctl_info *mci; 910 struct edac_mc_layer layers[2]; 911 void __iomem *vbase; 912 struct cpc925_mc_pdata *pdata; 913 struct resource *r; 914 int res = 0, nr_channels; 915 916 edac_dbg(0, "%s platform device found!\n", pdev->name); 917 918 if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) { 919 res = -ENOMEM; 920 goto out; 921 } 922 923 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 924 if (!r) { 925 cpc925_printk(KERN_ERR, "Unable to get resource\n"); 926 res = -ENOENT; 927 goto err1; 928 } 929 930 if (!devm_request_mem_region(&pdev->dev, 931 r->start, 932 resource_size(r), 933 pdev->name)) { 934 cpc925_printk(KERN_ERR, "Unable to request mem region\n"); 935 res = -EBUSY; 936 goto err1; 937 } 938 939 vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r)); 940 if (!vbase) { 941 cpc925_printk(KERN_ERR, "Unable to ioremap device\n"); 942 res = -ENOMEM; 943 goto err2; 944 } 945 946 nr_channels = cpc925_mc_get_channels(vbase) + 1; 947 948 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; 949 layers[0].size = CPC925_NR_CSROWS; 950 layers[0].is_virt_csrow = true; 951 layers[1].type = EDAC_MC_LAYER_CHANNEL; 952 layers[1].size = nr_channels; 953 layers[1].is_virt_csrow = false; 954 mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, 955 sizeof(struct cpc925_mc_pdata)); 956 if (!mci) { 957 cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n"); 958 res = -ENOMEM; 959 goto err2; 960 } 961 962 pdata = mci->pvt_info; 963 pdata->vbase = vbase; 964 pdata->edac_idx = edac_mc_idx++; 965 pdata->name = pdev->name; 966 967 mci->pdev = &pdev->dev; 968 platform_set_drvdata(pdev, mci); 969 mci->dev_name = dev_name(&pdev->dev); 970 mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; 971 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 972 mci->edac_cap = EDAC_FLAG_SECDED; 973 mci->mod_name = CPC925_EDAC_MOD_STR; 974 mci->ctl_name = pdev->name; 975 976 if (edac_op_state == EDAC_OPSTATE_POLL) 977 mci->edac_check = cpc925_mc_check; 978 979 mci->ctl_page_to_phys = NULL; 980 mci->scrub_mode = SCRUB_SW_SRC; 981 mci->set_sdram_scrub_rate = NULL; 982 mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate; 983 984 cpc925_init_csrows(mci); 985 986 /* Setup memory controller registers */ 987 cpc925_mc_init(mci); 988 989 if (edac_mc_add_mc(mci) > 0) { 990 cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n"); 991 goto err3; 992 } 993 994 cpc925_add_edac_devices(vbase); 995 996 /* get this far and it's successful */ 997 edac_dbg(0, "success\n"); 998 999 res = 0; 1000 goto out; 1001 1002 err3: 1003 cpc925_mc_exit(mci); 1004 edac_mc_free(mci); 1005 err2: 1006 devm_release_mem_region(&pdev->dev, r->start, resource_size(r)); 1007 err1: 1008 devres_release_group(&pdev->dev, cpc925_probe); 1009 out: 1010 return res; 1011 } 1012 1013 static void cpc925_remove(struct platform_device *pdev) 1014 { 1015 struct mem_ctl_info *mci = platform_get_drvdata(pdev); 1016 1017 /* 1018 * Delete common edac devices before edac mc, because 1019 * the former share the MMIO of the latter. 1020 */ 1021 cpc925_del_edac_devices(); 1022 cpc925_mc_exit(mci); 1023 1024 edac_mc_del_mc(&pdev->dev); 1025 edac_mc_free(mci); 1026 } 1027 1028 static struct platform_driver cpc925_edac_driver = { 1029 .probe = cpc925_probe, 1030 .remove_new = cpc925_remove, 1031 .driver = { 1032 .name = "cpc925_edac", 1033 } 1034 }; 1035 1036 static int __init cpc925_edac_init(void) 1037 { 1038 int ret = 0; 1039 1040 printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n"); 1041 printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n"); 1042 1043 /* Only support POLL mode so far */ 1044 edac_op_state = EDAC_OPSTATE_POLL; 1045 1046 ret = platform_driver_register(&cpc925_edac_driver); 1047 if (ret) { 1048 printk(KERN_WARNING "Failed to register %s\n", 1049 CPC925_EDAC_MOD_STR); 1050 } 1051 1052 return ret; 1053 } 1054 1055 static void __exit cpc925_edac_exit(void) 1056 { 1057 platform_driver_unregister(&cpc925_edac_driver); 1058 } 1059 1060 module_init(cpc925_edac_init); 1061 module_exit(cpc925_edac_exit); 1062 1063 MODULE_LICENSE("GPL"); 1064 MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>"); 1065 MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module"); 1066