xref: /linux/drivers/gpio/gpiolib-acpi.c (revision e91c37f1)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * ACPI helpers for GPIO API
4  *
5  * Copyright (C) 2012, Intel Corporation
6  * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
7  *          Mika Westerberg <mika.westerberg@linux.intel.com>
8  */
9 
10 #include <linux/acpi.h>
11 #include <linux/dmi.h>
12 #include <linux/errno.h>
13 #include <linux/export.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/mutex.h>
17 #include <linux/pinctrl/pinctrl.h>
18 
19 #include <linux/gpio/consumer.h>
20 #include <linux/gpio/driver.h>
21 #include <linux/gpio/machine.h>
22 
23 #include "gpiolib.h"
24 #include "gpiolib-acpi.h"
25 
26 static int run_edge_events_on_boot = -1;
27 module_param(run_edge_events_on_boot, int, 0444);
28 MODULE_PARM_DESC(run_edge_events_on_boot,
29 		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
30 
31 static char *ignore_wake;
32 module_param(ignore_wake, charp, 0444);
33 MODULE_PARM_DESC(ignore_wake,
34 		 "controller@pin combos on which to ignore the ACPI wake flag "
35 		 "ignore_wake=controller@pin[,controller@pin[,...]]");
36 
37 static char *ignore_interrupt;
38 module_param(ignore_interrupt, charp, 0444);
39 MODULE_PARM_DESC(ignore_interrupt,
40 		 "controller@pin combos on which to ignore interrupt "
41 		 "ignore_interrupt=controller@pin[,controller@pin[,...]]");
42 
43 struct acpi_gpiolib_dmi_quirk {
44 	bool no_edge_events_on_boot;
45 	char *ignore_wake;
46 	char *ignore_interrupt;
47 };
48 
49 /**
50  * struct acpi_gpio_event - ACPI GPIO event handler data
51  *
52  * @node:	  list-entry of the events list of the struct acpi_gpio_chip
53  * @handle:	  handle of ACPI method to execute when the IRQ triggers
54  * @handler:	  handler function to pass to request_irq() when requesting the IRQ
55  * @pin:	  GPIO pin number on the struct gpio_chip
56  * @irq:	  Linux IRQ number for the event, for request_irq() / free_irq()
57  * @irqflags:	  flags to pass to request_irq() when requesting the IRQ
58  * @irq_is_wake:  If the ACPI flags indicate the IRQ is a wakeup source
59  * @irq_requested:True if request_irq() has been done
60  * @desc:	  struct gpio_desc for the GPIO pin for this event
61  */
62 struct acpi_gpio_event {
63 	struct list_head node;
64 	acpi_handle handle;
65 	irq_handler_t handler;
66 	unsigned int pin;
67 	unsigned int irq;
68 	unsigned long irqflags;
69 	bool irq_is_wake;
70 	bool irq_requested;
71 	struct gpio_desc *desc;
72 };
73 
74 struct acpi_gpio_connection {
75 	struct list_head node;
76 	unsigned int pin;
77 	struct gpio_desc *desc;
78 };
79 
80 struct acpi_gpio_chip {
81 	/*
82 	 * ACPICA requires that the first field of the context parameter
83 	 * passed to acpi_install_address_space_handler() is large enough
84 	 * to hold struct acpi_connection_info.
85 	 */
86 	struct acpi_connection_info conn_info;
87 	struct list_head conns;
88 	struct mutex conn_lock;
89 	struct gpio_chip *chip;
90 	struct list_head events;
91 	struct list_head deferred_req_irqs_list_entry;
92 };
93 
94 /**
95  * struct acpi_gpio_info - ACPI GPIO specific information
96  * @adev: reference to ACPI device which consumes GPIO resource
97  * @flags: GPIO initialization flags
98  * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
99  * @pin_config: pin bias as provided by ACPI
100  * @polarity: interrupt polarity as provided by ACPI
101  * @triggering: triggering type as provided by ACPI
102  * @wake_capable: wake capability as provided by ACPI
103  * @debounce: debounce timeout as provided by ACPI
104  * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping
105  */
106 struct acpi_gpio_info {
107 	struct acpi_device *adev;
108 	enum gpiod_flags flags;
109 	bool gpioint;
110 	int pin_config;
111 	int polarity;
112 	int triggering;
113 	bool wake_capable;
114 	unsigned int debounce;
115 	unsigned int quirks;
116 };
117 
118 /*
119  * For GPIO chips which call acpi_gpiochip_request_interrupts() before late_init
120  * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a
121  * late_initcall_sync() handler, so that other builtin drivers can register their
122  * OpRegions before the event handlers can run. This list contains GPIO chips
123  * for which the acpi_gpiochip_request_irqs() call has been deferred.
124  */
125 static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
126 static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
127 static bool acpi_gpio_deferred_req_irqs_done;
128 
129 static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
130 {
131 	return device_match_acpi_handle(&gc->gpiodev->dev, data);
132 }
133 
134 /**
135  * acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
136  * @path:	ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
137  * @pin:	ACPI GPIO pin number (0-based, controller-relative)
138  *
139  * Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
140  * error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO
141  * controller does not have GPIO chip registered at the moment. This is to
142  * support probe deferral.
143  */
144 static struct gpio_desc *acpi_get_gpiod(char *path, unsigned int pin)
145 {
146 	acpi_handle handle;
147 	acpi_status status;
148 
149 	status = acpi_get_handle(NULL, path, &handle);
150 	if (ACPI_FAILURE(status))
151 		return ERR_PTR(-ENODEV);
152 
153 	struct gpio_device *gdev __free(gpio_device_put) =
154 				gpio_device_find(handle, acpi_gpiochip_find);
155 	if (!gdev)
156 		return ERR_PTR(-EPROBE_DEFER);
157 
158 	/*
159 	 * FIXME: keep track of the reference to the GPIO device somehow
160 	 * instead of putting it here.
161 	 */
162 	return gpio_device_get_desc(gdev, pin);
163 }
164 
165 static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
166 {
167 	struct acpi_gpio_event *event = data;
168 
169 	acpi_evaluate_object(event->handle, NULL, NULL, NULL);
170 
171 	return IRQ_HANDLED;
172 }
173 
174 static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
175 {
176 	struct acpi_gpio_event *event = data;
177 
178 	acpi_execute_simple_method(event->handle, NULL, event->pin);
179 
180 	return IRQ_HANDLED;
181 }
182 
183 static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
184 {
185 	/* The address of this function is used as a key. */
186 }
187 
188 bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
189 				struct acpi_resource_gpio **agpio)
190 {
191 	struct acpi_resource_gpio *gpio;
192 
193 	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
194 		return false;
195 
196 	gpio = &ares->data.gpio;
197 	if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
198 		return false;
199 
200 	*agpio = gpio;
201 	return true;
202 }
203 EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
204 
205 /**
206  * acpi_gpio_get_io_resource - Fetch details of an ACPI resource if it is a GPIO
207  *			       I/O resource or return False if not.
208  * @ares:	Pointer to the ACPI resource to fetch
209  * @agpio:	Pointer to a &struct acpi_resource_gpio to store the output pointer
210  */
211 bool acpi_gpio_get_io_resource(struct acpi_resource *ares,
212 			       struct acpi_resource_gpio **agpio)
213 {
214 	struct acpi_resource_gpio *gpio;
215 
216 	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
217 		return false;
218 
219 	gpio = &ares->data.gpio;
220 	if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_IO)
221 		return false;
222 
223 	*agpio = gpio;
224 	return true;
225 }
226 EXPORT_SYMBOL_GPL(acpi_gpio_get_io_resource);
227 
228 static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio,
229 				      struct acpi_gpio_event *event)
230 {
231 	struct device *parent = acpi_gpio->chip->parent;
232 	int ret, value;
233 
234 	ret = request_threaded_irq(event->irq, NULL, event->handler,
235 				   event->irqflags | IRQF_ONESHOT, "ACPI:Event", event);
236 	if (ret) {
237 		dev_err(parent, "Failed to setup interrupt handler for %d\n", event->irq);
238 		return;
239 	}
240 
241 	if (event->irq_is_wake)
242 		enable_irq_wake(event->irq);
243 
244 	event->irq_requested = true;
245 
246 	/* Make sure we trigger the initial state of edge-triggered IRQs */
247 	if (run_edge_events_on_boot &&
248 	    (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) {
249 		value = gpiod_get_raw_value_cansleep(event->desc);
250 		if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
251 		    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
252 			event->handler(event->irq, event);
253 	}
254 }
255 
256 static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
257 {
258 	struct acpi_gpio_event *event;
259 
260 	list_for_each_entry(event, &acpi_gpio->events, node)
261 		acpi_gpiochip_request_irq(acpi_gpio, event);
262 }
263 
264 static enum gpiod_flags
265 acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity)
266 {
267 	/* GpioInt() implies input configuration */
268 	if (agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
269 		return GPIOD_IN;
270 
271 	switch (agpio->io_restriction) {
272 	case ACPI_IO_RESTRICT_INPUT:
273 		return GPIOD_IN;
274 	case ACPI_IO_RESTRICT_OUTPUT:
275 		/*
276 		 * ACPI GPIO resources don't contain an initial value for the
277 		 * GPIO. Therefore we deduce that value from the pull field
278 		 * and the polarity instead. If the pin is pulled up we assume
279 		 * default to be high, if it is pulled down we assume default
280 		 * to be low, otherwise we leave pin untouched. For active low
281 		 * polarity values will be switched. See also
282 		 * Documentation/firmware-guide/acpi/gpio-properties.rst.
283 		 */
284 		switch (agpio->pin_config) {
285 		case ACPI_PIN_CONFIG_PULLUP:
286 			return polarity == GPIO_ACTIVE_LOW ? GPIOD_OUT_LOW : GPIOD_OUT_HIGH;
287 		case ACPI_PIN_CONFIG_PULLDOWN:
288 			return polarity == GPIO_ACTIVE_LOW ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
289 		default:
290 			break;
291 		}
292 		break;
293 	default:
294 		break;
295 	}
296 
297 	/*
298 	 * Assume that the BIOS has configured the direction and pull
299 	 * accordingly.
300 	 */
301 	return GPIOD_ASIS;
302 }
303 
304 static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
305 						struct acpi_resource_gpio *agpio,
306 						unsigned int index,
307 						const char *label)
308 {
309 	int polarity = GPIO_ACTIVE_HIGH;
310 	enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity);
311 	unsigned int pin = agpio->pin_table[index];
312 	struct gpio_desc *desc;
313 	int ret;
314 
315 	desc = gpiochip_request_own_desc(chip, pin, label, polarity, flags);
316 	if (IS_ERR(desc))
317 		return desc;
318 
319 	/* ACPI uses hundredths of milliseconds units */
320 	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10);
321 	if (ret)
322 		dev_warn(chip->parent,
323 			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
324 			 pin, ret);
325 
326 	return desc;
327 }
328 
329 static bool acpi_gpio_in_ignore_list(const char *ignore_list, const char *controller_in,
330 				     unsigned int pin_in)
331 {
332 	const char *controller, *pin_str;
333 	unsigned int pin;
334 	char *endp;
335 	int len;
336 
337 	controller = ignore_list;
338 	while (controller) {
339 		pin_str = strchr(controller, '@');
340 		if (!pin_str)
341 			goto err;
342 
343 		len = pin_str - controller;
344 		if (len == strlen(controller_in) &&
345 		    strncmp(controller, controller_in, len) == 0) {
346 			pin = simple_strtoul(pin_str + 1, &endp, 10);
347 			if (*endp != 0 && *endp != ',')
348 				goto err;
349 
350 			if (pin == pin_in)
351 				return true;
352 		}
353 
354 		controller = strchr(controller, ',');
355 		if (controller)
356 			controller++;
357 	}
358 
359 	return false;
360 err:
361 	pr_err_once("Error: Invalid value for gpiolib_acpi.ignore_...: %s\n", ignore_list);
362 	return false;
363 }
364 
365 static bool acpi_gpio_irq_is_wake(struct device *parent,
366 				  const struct acpi_resource_gpio *agpio)
367 {
368 	unsigned int pin = agpio->pin_table[0];
369 
370 	if (agpio->wake_capable != ACPI_WAKE_CAPABLE)
371 		return false;
372 
373 	if (acpi_gpio_in_ignore_list(ignore_wake, dev_name(parent), pin)) {
374 		dev_info(parent, "Ignoring wakeup on pin %u\n", pin);
375 		return false;
376 	}
377 
378 	return true;
379 }
380 
381 /* Always returns AE_OK so that we keep looping over the resources */
382 static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
383 					     void *context)
384 {
385 	struct acpi_gpio_chip *acpi_gpio = context;
386 	struct gpio_chip *chip = acpi_gpio->chip;
387 	struct acpi_resource_gpio *agpio;
388 	acpi_handle handle, evt_handle;
389 	struct acpi_gpio_event *event;
390 	irq_handler_t handler = NULL;
391 	struct gpio_desc *desc;
392 	unsigned int pin;
393 	int ret, irq;
394 
395 	if (!acpi_gpio_get_irq_resource(ares, &agpio))
396 		return AE_OK;
397 
398 	handle = ACPI_HANDLE(chip->parent);
399 	pin = agpio->pin_table[0];
400 
401 	if (pin <= 255) {
402 		char ev_name[8];
403 		sprintf(ev_name, "_%c%02X",
404 			agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L',
405 			pin);
406 		if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
407 			handler = acpi_gpio_irq_handler;
408 	}
409 	if (!handler) {
410 		if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle)))
411 			handler = acpi_gpio_irq_handler_evt;
412 	}
413 	if (!handler)
414 		return AE_OK;
415 
416 	if (acpi_gpio_in_ignore_list(ignore_interrupt, dev_name(chip->parent), pin)) {
417 		dev_info(chip->parent, "Ignoring interrupt on pin %u\n", pin);
418 		return AE_OK;
419 	}
420 
421 	desc = acpi_request_own_gpiod(chip, agpio, 0, "ACPI:Event");
422 	if (IS_ERR(desc)) {
423 		dev_err(chip->parent,
424 			"Failed to request GPIO for pin 0x%04X, err %ld\n",
425 			pin, PTR_ERR(desc));
426 		return AE_OK;
427 	}
428 
429 	ret = gpiochip_lock_as_irq(chip, pin);
430 	if (ret) {
431 		dev_err(chip->parent,
432 			"Failed to lock GPIO pin 0x%04X as interrupt, err %d\n",
433 			pin, ret);
434 		goto fail_free_desc;
435 	}
436 
437 	irq = gpiod_to_irq(desc);
438 	if (irq < 0) {
439 		dev_err(chip->parent,
440 			"Failed to translate GPIO pin 0x%04X to IRQ, err %d\n",
441 			pin, irq);
442 		goto fail_unlock_irq;
443 	}
444 
445 	event = kzalloc(sizeof(*event), GFP_KERNEL);
446 	if (!event)
447 		goto fail_unlock_irq;
448 
449 	event->irqflags = IRQF_ONESHOT;
450 	if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
451 		if (agpio->polarity == ACPI_ACTIVE_HIGH)
452 			event->irqflags |= IRQF_TRIGGER_HIGH;
453 		else
454 			event->irqflags |= IRQF_TRIGGER_LOW;
455 	} else {
456 		switch (agpio->polarity) {
457 		case ACPI_ACTIVE_HIGH:
458 			event->irqflags |= IRQF_TRIGGER_RISING;
459 			break;
460 		case ACPI_ACTIVE_LOW:
461 			event->irqflags |= IRQF_TRIGGER_FALLING;
462 			break;
463 		default:
464 			event->irqflags |= IRQF_TRIGGER_RISING |
465 					   IRQF_TRIGGER_FALLING;
466 			break;
467 		}
468 	}
469 
470 	event->handle = evt_handle;
471 	event->handler = handler;
472 	event->irq = irq;
473 	event->irq_is_wake = acpi_gpio_irq_is_wake(chip->parent, agpio);
474 	event->pin = pin;
475 	event->desc = desc;
476 
477 	list_add_tail(&event->node, &acpi_gpio->events);
478 
479 	return AE_OK;
480 
481 fail_unlock_irq:
482 	gpiochip_unlock_as_irq(chip, pin);
483 fail_free_desc:
484 	gpiochip_free_own_desc(desc);
485 
486 	return AE_OK;
487 }
488 
489 /**
490  * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
491  * @chip:      GPIO chip
492  *
493  * ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
494  * handled by ACPI event methods which need to be called from the GPIO
495  * chip's interrupt handler. acpi_gpiochip_request_interrupts() finds out which
496  * GPIO pins have ACPI event methods and assigns interrupt handlers that calls
497  * the ACPI event methods for those pins.
498  */
499 void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
500 {
501 	struct acpi_gpio_chip *acpi_gpio;
502 	acpi_handle handle;
503 	acpi_status status;
504 	bool defer;
505 
506 	if (!chip->parent || !chip->to_irq)
507 		return;
508 
509 	handle = ACPI_HANDLE(chip->parent);
510 	if (!handle)
511 		return;
512 
513 	status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
514 	if (ACPI_FAILURE(status))
515 		return;
516 
517 	if (acpi_quirk_skip_gpio_event_handlers())
518 		return;
519 
520 	acpi_walk_resources(handle, METHOD_NAME__AEI,
521 			    acpi_gpiochip_alloc_event, acpi_gpio);
522 
523 	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
524 	defer = !acpi_gpio_deferred_req_irqs_done;
525 	if (defer)
526 		list_add(&acpi_gpio->deferred_req_irqs_list_entry,
527 			 &acpi_gpio_deferred_req_irqs_list);
528 	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
529 
530 	if (defer)
531 		return;
532 
533 	acpi_gpiochip_request_irqs(acpi_gpio);
534 }
535 EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts);
536 
537 /**
538  * acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
539  * @chip:      GPIO chip
540  *
541  * Free interrupts associated with GPIO ACPI event method for the given
542  * GPIO chip.
543  */
544 void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
545 {
546 	struct acpi_gpio_chip *acpi_gpio;
547 	struct acpi_gpio_event *event, *ep;
548 	acpi_handle handle;
549 	acpi_status status;
550 
551 	if (!chip->parent || !chip->to_irq)
552 		return;
553 
554 	handle = ACPI_HANDLE(chip->parent);
555 	if (!handle)
556 		return;
557 
558 	status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
559 	if (ACPI_FAILURE(status))
560 		return;
561 
562 	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
563 	if (!list_empty(&acpi_gpio->deferred_req_irqs_list_entry))
564 		list_del_init(&acpi_gpio->deferred_req_irqs_list_entry);
565 	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
566 
567 	list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
568 		if (event->irq_requested) {
569 			if (event->irq_is_wake)
570 				disable_irq_wake(event->irq);
571 
572 			free_irq(event->irq, event);
573 		}
574 
575 		gpiochip_unlock_as_irq(chip, event->pin);
576 		gpiochip_free_own_desc(event->desc);
577 		list_del(&event->node);
578 		kfree(event);
579 	}
580 }
581 EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts);
582 
583 int acpi_dev_add_driver_gpios(struct acpi_device *adev,
584 			      const struct acpi_gpio_mapping *gpios)
585 {
586 	if (adev && gpios) {
587 		adev->driver_gpios = gpios;
588 		return 0;
589 	}
590 	return -EINVAL;
591 }
592 EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
593 
594 void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
595 {
596 	if (adev)
597 		adev->driver_gpios = NULL;
598 }
599 EXPORT_SYMBOL_GPL(acpi_dev_remove_driver_gpios);
600 
601 static void acpi_dev_release_driver_gpios(void *adev)
602 {
603 	acpi_dev_remove_driver_gpios(adev);
604 }
605 
606 int devm_acpi_dev_add_driver_gpios(struct device *dev,
607 				   const struct acpi_gpio_mapping *gpios)
608 {
609 	struct acpi_device *adev = ACPI_COMPANION(dev);
610 	int ret;
611 
612 	ret = acpi_dev_add_driver_gpios(adev, gpios);
613 	if (ret)
614 		return ret;
615 
616 	return devm_add_action_or_reset(dev, acpi_dev_release_driver_gpios, adev);
617 }
618 EXPORT_SYMBOL_GPL(devm_acpi_dev_add_driver_gpios);
619 
620 static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
621 				      const char *name, int index,
622 				      struct fwnode_reference_args *args,
623 				      unsigned int *quirks)
624 {
625 	const struct acpi_gpio_mapping *gm;
626 
627 	if (!adev || !adev->driver_gpios)
628 		return false;
629 
630 	for (gm = adev->driver_gpios; gm->name; gm++)
631 		if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
632 			const struct acpi_gpio_params *par = gm->data + index;
633 
634 			args->fwnode = acpi_fwnode_handle(adev);
635 			args->args[0] = par->crs_entry_index;
636 			args->args[1] = par->line_index;
637 			args->args[2] = par->active_low;
638 			args->nargs = 3;
639 
640 			*quirks = gm->quirks;
641 			return true;
642 		}
643 
644 	return false;
645 }
646 
647 static int
648 __acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update)
649 {
650 	const enum gpiod_flags mask =
651 		GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT |
652 		GPIOD_FLAGS_BIT_DIR_VAL;
653 	int ret = 0;
654 
655 	/*
656 	 * Check if the BIOS has IoRestriction with explicitly set direction
657 	 * and update @flags accordingly. Otherwise use whatever caller asked
658 	 * for.
659 	 */
660 	if (update & GPIOD_FLAGS_BIT_DIR_SET) {
661 		enum gpiod_flags diff = *flags ^ update;
662 
663 		/*
664 		 * Check if caller supplied incompatible GPIO initialization
665 		 * flags.
666 		 *
667 		 * Return %-EINVAL to notify that firmware has different
668 		 * settings and we are going to use them.
669 		 */
670 		if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) ||
671 		    ((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL)))
672 			ret = -EINVAL;
673 		*flags = (*flags & ~mask) | (update & mask);
674 	}
675 	return ret;
676 }
677 
678 static int acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags,
679 				        struct acpi_gpio_info *info)
680 {
681 	struct device *dev = &info->adev->dev;
682 	enum gpiod_flags old = *flags;
683 	int ret;
684 
685 	ret = __acpi_gpio_update_gpiod_flags(&old, info->flags);
686 	if (info->quirks & ACPI_GPIO_QUIRK_NO_IO_RESTRICTION) {
687 		if (ret)
688 			dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n");
689 	} else {
690 		if (ret)
691 			dev_dbg(dev, "Override GPIO initialization flags\n");
692 		*flags = old;
693 	}
694 
695 	return ret;
696 }
697 
698 static int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
699 					       struct acpi_gpio_info *info)
700 {
701 	switch (info->pin_config) {
702 	case ACPI_PIN_CONFIG_PULLUP:
703 		*lookupflags |= GPIO_PULL_UP;
704 		break;
705 	case ACPI_PIN_CONFIG_PULLDOWN:
706 		*lookupflags |= GPIO_PULL_DOWN;
707 		break;
708 	case ACPI_PIN_CONFIG_NOPULL:
709 		*lookupflags |= GPIO_PULL_DISABLE;
710 		break;
711 	default:
712 		break;
713 	}
714 
715 	if (info->polarity == GPIO_ACTIVE_LOW)
716 		*lookupflags |= GPIO_ACTIVE_LOW;
717 
718 	return 0;
719 }
720 
721 struct acpi_gpio_lookup {
722 	struct acpi_gpio_info info;
723 	int index;
724 	u16 pin_index;
725 	bool active_low;
726 	struct gpio_desc *desc;
727 	int n;
728 };
729 
730 static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
731 {
732 	struct acpi_gpio_lookup *lookup = data;
733 
734 	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
735 		return 1;
736 
737 	if (!lookup->desc) {
738 		const struct acpi_resource_gpio *agpio = &ares->data.gpio;
739 		bool gpioint = agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
740 		struct gpio_desc *desc;
741 		u16 pin_index;
742 
743 		if (lookup->info.quirks & ACPI_GPIO_QUIRK_ONLY_GPIOIO && gpioint)
744 			lookup->index++;
745 
746 		if (lookup->n++ != lookup->index)
747 			return 1;
748 
749 		pin_index = lookup->pin_index;
750 		if (pin_index >= agpio->pin_table_length)
751 			return 1;
752 
753 		if (lookup->info.quirks & ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER)
754 			desc = gpio_to_desc(agpio->pin_table[pin_index]);
755 		else
756 			desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
757 					      agpio->pin_table[pin_index]);
758 		lookup->desc = desc;
759 		lookup->info.pin_config = agpio->pin_config;
760 		lookup->info.debounce = agpio->debounce_timeout;
761 		lookup->info.gpioint = gpioint;
762 		lookup->info.wake_capable = acpi_gpio_irq_is_wake(&lookup->info.adev->dev, agpio);
763 
764 		/*
765 		 * Polarity and triggering are only specified for GpioInt
766 		 * resource.
767 		 * Note: we expect here:
768 		 * - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW
769 		 * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
770 		 */
771 		if (lookup->info.gpioint) {
772 			lookup->info.polarity = agpio->polarity;
773 			lookup->info.triggering = agpio->triggering;
774 		} else {
775 			lookup->info.polarity = lookup->active_low;
776 		}
777 
778 		lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio, lookup->info.polarity);
779 	}
780 
781 	return 1;
782 }
783 
784 static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup,
785 				     struct acpi_gpio_info *info)
786 {
787 	struct acpi_device *adev = lookup->info.adev;
788 	struct list_head res_list;
789 	int ret;
790 
791 	INIT_LIST_HEAD(&res_list);
792 
793 	ret = acpi_dev_get_resources(adev, &res_list,
794 				     acpi_populate_gpio_lookup,
795 				     lookup);
796 	if (ret < 0)
797 		return ret;
798 
799 	acpi_dev_free_resource_list(&res_list);
800 
801 	if (!lookup->desc)
802 		return -ENOENT;
803 
804 	if (info)
805 		*info = lookup->info;
806 	return 0;
807 }
808 
809 static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
810 				     const char *propname, int index,
811 				     struct acpi_gpio_lookup *lookup)
812 {
813 	struct fwnode_reference_args args;
814 	unsigned int quirks = 0;
815 	int ret;
816 
817 	memset(&args, 0, sizeof(args));
818 	ret = __acpi_node_get_property_reference(fwnode, propname, index, 3,
819 						 &args);
820 	if (ret) {
821 		struct acpi_device *adev;
822 
823 		adev = to_acpi_device_node(fwnode);
824 		if (!acpi_get_driver_gpio_data(adev, propname, index, &args, &quirks))
825 			return ret;
826 	}
827 	/*
828 	 * The property was found and resolved, so need to lookup the GPIO based
829 	 * on returned args.
830 	 */
831 	if (!to_acpi_device_node(args.fwnode))
832 		return -EINVAL;
833 	if (args.nargs != 3)
834 		return -EPROTO;
835 
836 	lookup->index = args.args[0];
837 	lookup->pin_index = args.args[1];
838 	lookup->active_low = !!args.args[2];
839 
840 	lookup->info.adev = to_acpi_device_node(args.fwnode);
841 	lookup->info.quirks = quirks;
842 
843 	return 0;
844 }
845 
846 /**
847  * acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
848  * @adev: pointer to a ACPI device to get GPIO from
849  * @propname: Property name of the GPIO (optional)
850  * @index: index of GpioIo/GpioInt resource (starting from %0)
851  * @info: info pointer to fill in (optional)
852  *
853  * Function goes through ACPI resources for @adev and based on @index looks
854  * up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
855  * and returns it. @index matches GpioIo/GpioInt resources only so if there
856  * are total %3 GPIO resources, the index goes from %0 to %2.
857  *
858  * If @propname is specified the GPIO is looked using device property. In
859  * that case @index is used to select the GPIO entry in the property value
860  * (in case of multiple).
861  *
862  * If the GPIO cannot be translated or there is an error, an ERR_PTR is
863  * returned.
864  *
865  * Note: if the GPIO resource has multiple entries in the pin list, this
866  * function only returns the first.
867  */
868 static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
869 						 const char *propname,
870 						 int index,
871 						 struct acpi_gpio_info *info)
872 {
873 	struct acpi_gpio_lookup lookup;
874 	int ret;
875 
876 	if (!adev)
877 		return ERR_PTR(-ENODEV);
878 
879 	memset(&lookup, 0, sizeof(lookup));
880 	lookup.index = index;
881 
882 	if (propname) {
883 		dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
884 
885 		ret = acpi_gpio_property_lookup(acpi_fwnode_handle(adev),
886 						propname, index, &lookup);
887 		if (ret)
888 			return ERR_PTR(ret);
889 
890 		dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %u %u\n",
891 			dev_name(&lookup.info.adev->dev), lookup.index,
892 			lookup.pin_index, lookup.active_low);
893 	} else {
894 		dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
895 		lookup.info.adev = adev;
896 	}
897 
898 	ret = acpi_gpio_resource_lookup(&lookup, info);
899 	return ret ? ERR_PTR(ret) : lookup.desc;
900 }
901 
902 /**
903  * acpi_get_gpiod_from_data() - get a GPIO descriptor from ACPI data node
904  * @fwnode: pointer to an ACPI firmware node to get the GPIO information from
905  * @propname: Property name of the GPIO
906  * @index: index of GpioIo/GpioInt resource (starting from %0)
907  * @info: info pointer to fill in (optional)
908  *
909  * This function uses the property-based GPIO lookup to get to the GPIO
910  * resource with the relevant information from a data-only ACPI firmware node
911  * and uses that to obtain the GPIO descriptor to return.
912  *
913  * If the GPIO cannot be translated or there is an error an ERR_PTR is
914  * returned.
915  */
916 static struct gpio_desc *acpi_get_gpiod_from_data(struct fwnode_handle *fwnode,
917 						  const char *propname,
918 						  int index,
919 						  struct acpi_gpio_info *info)
920 {
921 	struct acpi_gpio_lookup lookup;
922 	int ret;
923 
924 	if (!is_acpi_data_node(fwnode))
925 		return ERR_PTR(-ENODEV);
926 
927 	if (!propname)
928 		return ERR_PTR(-EINVAL);
929 
930 	memset(&lookup, 0, sizeof(lookup));
931 	lookup.index = index;
932 
933 	ret = acpi_gpio_property_lookup(fwnode, propname, index, &lookup);
934 	if (ret)
935 		return ERR_PTR(ret);
936 
937 	ret = acpi_gpio_resource_lookup(&lookup, info);
938 	return ret ? ERR_PTR(ret) : lookup.desc;
939 }
940 
941 static bool acpi_can_fallback_to_crs(struct acpi_device *adev,
942 				     const char *con_id)
943 {
944 	/* Never allow fallback if the device has properties */
945 	if (acpi_dev_has_props(adev) || adev->driver_gpios)
946 		return false;
947 
948 	return con_id == NULL;
949 }
950 
951 struct gpio_desc *acpi_find_gpio(struct fwnode_handle *fwnode,
952 				 const char *con_id,
953 				 unsigned int idx,
954 				 enum gpiod_flags *dflags,
955 				 unsigned long *lookupflags)
956 {
957 	struct acpi_device *adev = to_acpi_device_node(fwnode);
958 	struct acpi_gpio_info info;
959 	struct gpio_desc *desc;
960 	char propname[32];
961 	int i;
962 
963 	/* Try first from _DSD */
964 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
965 		if (con_id) {
966 			snprintf(propname, sizeof(propname), "%s-%s",
967 				 con_id, gpio_suffixes[i]);
968 		} else {
969 			snprintf(propname, sizeof(propname), "%s",
970 				 gpio_suffixes[i]);
971 		}
972 
973 		if (adev)
974 			desc = acpi_get_gpiod_by_index(adev,
975 						       propname, idx, &info);
976 		else
977 			desc = acpi_get_gpiod_from_data(fwnode,
978 						        propname, idx, &info);
979 		if (!IS_ERR(desc))
980 			break;
981 		if (PTR_ERR(desc) == -EPROBE_DEFER)
982 			return ERR_CAST(desc);
983 	}
984 
985 	/* Then from plain _CRS GPIOs */
986 	if (IS_ERR(desc)) {
987 		if (!adev || !acpi_can_fallback_to_crs(adev, con_id))
988 			return ERR_PTR(-ENOENT);
989 
990 		desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
991 		if (IS_ERR(desc))
992 			return desc;
993 	}
994 
995 	if (info.gpioint &&
996 	    (*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) {
997 		dev_dbg(&adev->dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n");
998 		return ERR_PTR(-ENOENT);
999 	}
1000 
1001 	acpi_gpio_update_gpiod_flags(dflags, &info);
1002 	acpi_gpio_update_gpiod_lookup_flags(lookupflags, &info);
1003 	return desc;
1004 }
1005 
1006 /**
1007  * acpi_dev_gpio_irq_wake_get_by() - Find GpioInt and translate it to Linux IRQ number
1008  * @adev: pointer to a ACPI device to get IRQ from
1009  * @name: optional name of GpioInt resource
1010  * @index: index of GpioInt resource (starting from %0)
1011  * @wake_capable: Set to true if the IRQ is wake capable
1012  *
1013  * If the device has one or more GpioInt resources, this function can be
1014  * used to translate from the GPIO offset in the resource to the Linux IRQ
1015  * number.
1016  *
1017  * The function is idempotent, though each time it runs it will configure GPIO
1018  * pin direction according to the flags in GpioInt resource.
1019  *
1020  * The function takes optional @name parameter. If the resource has a property
1021  * name, then only those will be taken into account.
1022  *
1023  * The GPIO is considered wake capable if the GpioInt resource specifies
1024  * SharedAndWake or ExclusiveAndWake.
1025  *
1026  * Return: Linux IRQ number (> %0) on success, negative errno on failure.
1027  */
1028 int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, int index,
1029 				  bool *wake_capable)
1030 {
1031 	int idx, i;
1032 	unsigned int irq_flags;
1033 	int ret;
1034 
1035 	for (i = 0, idx = 0; idx <= index; i++) {
1036 		struct acpi_gpio_info info;
1037 		struct gpio_desc *desc;
1038 
1039 		desc = acpi_get_gpiod_by_index(adev, name, i, &info);
1040 
1041 		/* Ignore -EPROBE_DEFER, it only matters if idx matches */
1042 		if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER)
1043 			return PTR_ERR(desc);
1044 
1045 		if (info.gpioint && idx++ == index) {
1046 			unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
1047 			enum gpiod_flags dflags = GPIOD_ASIS;
1048 			char label[32];
1049 			int irq;
1050 
1051 			if (IS_ERR(desc))
1052 				return PTR_ERR(desc);
1053 
1054 			irq = gpiod_to_irq(desc);
1055 			if (irq < 0)
1056 				return irq;
1057 
1058 			acpi_gpio_update_gpiod_flags(&dflags, &info);
1059 			acpi_gpio_update_gpiod_lookup_flags(&lflags, &info);
1060 
1061 			snprintf(label, sizeof(label), "GpioInt() %d", index);
1062 			ret = gpiod_configure_flags(desc, label, lflags, dflags);
1063 			if (ret < 0)
1064 				return ret;
1065 
1066 			/* ACPI uses hundredths of milliseconds units */
1067 			ret = gpio_set_debounce_timeout(desc, info.debounce * 10);
1068 			if (ret)
1069 				return ret;
1070 
1071 			irq_flags = acpi_dev_get_irq_type(info.triggering,
1072 							  info.polarity);
1073 
1074 			/*
1075 			 * If the IRQ is not already in use then set type
1076 			 * if specified and different than the current one.
1077 			 */
1078 			if (can_request_irq(irq, irq_flags)) {
1079 				if (irq_flags != IRQ_TYPE_NONE &&
1080 				    irq_flags != irq_get_trigger_type(irq))
1081 					irq_set_irq_type(irq, irq_flags);
1082 			} else {
1083 				dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
1084 			}
1085 
1086 			/* avoid suspend issues with GPIOs when systems are using S3 */
1087 			if (wake_capable && acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
1088 				*wake_capable = info.wake_capable;
1089 
1090 			return irq;
1091 		}
1092 
1093 	}
1094 	return -ENOENT;
1095 }
1096 EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_wake_get_by);
1097 
1098 static acpi_status
1099 acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
1100 			    u32 bits, u64 *value, void *handler_context,
1101 			    void *region_context)
1102 {
1103 	struct acpi_gpio_chip *achip = region_context;
1104 	struct gpio_chip *chip = achip->chip;
1105 	struct acpi_resource_gpio *agpio;
1106 	struct acpi_resource *ares;
1107 	u16 pin_index = address;
1108 	acpi_status status;
1109 	int length;
1110 	int i;
1111 
1112 	status = acpi_buffer_to_resource(achip->conn_info.connection,
1113 					 achip->conn_info.length, &ares);
1114 	if (ACPI_FAILURE(status))
1115 		return status;
1116 
1117 	if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) {
1118 		ACPI_FREE(ares);
1119 		return AE_BAD_PARAMETER;
1120 	}
1121 
1122 	agpio = &ares->data.gpio;
1123 
1124 	if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
1125 	    function == ACPI_WRITE)) {
1126 		ACPI_FREE(ares);
1127 		return AE_BAD_PARAMETER;
1128 	}
1129 
1130 	length = min_t(u16, agpio->pin_table_length, pin_index + bits);
1131 	for (i = pin_index; i < length; ++i) {
1132 		unsigned int pin = agpio->pin_table[i];
1133 		struct acpi_gpio_connection *conn;
1134 		struct gpio_desc *desc;
1135 		bool found;
1136 
1137 		mutex_lock(&achip->conn_lock);
1138 
1139 		found = false;
1140 		list_for_each_entry(conn, &achip->conns, node) {
1141 			if (conn->pin == pin) {
1142 				found = true;
1143 				desc = conn->desc;
1144 				break;
1145 			}
1146 		}
1147 
1148 		/*
1149 		 * The same GPIO can be shared between operation region and
1150 		 * event but only if the access here is ACPI_READ. In that
1151 		 * case we "borrow" the event GPIO instead.
1152 		 */
1153 		if (!found && agpio->shareable == ACPI_SHARED &&
1154 		     function == ACPI_READ) {
1155 			struct acpi_gpio_event *event;
1156 
1157 			list_for_each_entry(event, &achip->events, node) {
1158 				if (event->pin == pin) {
1159 					desc = event->desc;
1160 					found = true;
1161 					break;
1162 				}
1163 			}
1164 		}
1165 
1166 		if (!found) {
1167 			desc = acpi_request_own_gpiod(chip, agpio, i, "ACPI:OpRegion");
1168 			if (IS_ERR(desc)) {
1169 				mutex_unlock(&achip->conn_lock);
1170 				status = AE_ERROR;
1171 				goto out;
1172 			}
1173 
1174 			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
1175 			if (!conn) {
1176 				gpiochip_free_own_desc(desc);
1177 				mutex_unlock(&achip->conn_lock);
1178 				status = AE_NO_MEMORY;
1179 				goto out;
1180 			}
1181 
1182 			conn->pin = pin;
1183 			conn->desc = desc;
1184 			list_add_tail(&conn->node, &achip->conns);
1185 		}
1186 
1187 		mutex_unlock(&achip->conn_lock);
1188 
1189 		if (function == ACPI_WRITE)
1190 			gpiod_set_raw_value_cansleep(desc, !!(*value & BIT(i)));
1191 		else
1192 			*value |= (u64)gpiod_get_raw_value_cansleep(desc) << i;
1193 	}
1194 
1195 out:
1196 	ACPI_FREE(ares);
1197 	return status;
1198 }
1199 
1200 static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip)
1201 {
1202 	struct gpio_chip *chip = achip->chip;
1203 	acpi_handle handle = ACPI_HANDLE(chip->parent);
1204 	acpi_status status;
1205 
1206 	INIT_LIST_HEAD(&achip->conns);
1207 	mutex_init(&achip->conn_lock);
1208 	status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
1209 						    acpi_gpio_adr_space_handler,
1210 						    NULL, achip);
1211 	if (ACPI_FAILURE(status))
1212 		dev_err(chip->parent,
1213 		        "Failed to install GPIO OpRegion handler\n");
1214 }
1215 
1216 static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
1217 {
1218 	struct gpio_chip *chip = achip->chip;
1219 	acpi_handle handle = ACPI_HANDLE(chip->parent);
1220 	struct acpi_gpio_connection *conn, *tmp;
1221 	acpi_status status;
1222 
1223 	status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
1224 						   acpi_gpio_adr_space_handler);
1225 	if (ACPI_FAILURE(status)) {
1226 		dev_err(chip->parent,
1227 			"Failed to remove GPIO OpRegion handler\n");
1228 		return;
1229 	}
1230 
1231 	list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) {
1232 		gpiochip_free_own_desc(conn->desc);
1233 		list_del(&conn->node);
1234 		kfree(conn);
1235 	}
1236 }
1237 
1238 static struct gpio_desc *
1239 acpi_gpiochip_parse_own_gpio(struct acpi_gpio_chip *achip,
1240 			     struct fwnode_handle *fwnode,
1241 			     const char **name,
1242 			     unsigned long *lflags,
1243 			     enum gpiod_flags *dflags)
1244 {
1245 	struct gpio_chip *chip = achip->chip;
1246 	struct gpio_desc *desc;
1247 	u32 gpios[2];
1248 	int ret;
1249 
1250 	*lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
1251 	*dflags = GPIOD_ASIS;
1252 	*name = NULL;
1253 
1254 	ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
1255 					     ARRAY_SIZE(gpios));
1256 	if (ret < 0)
1257 		return ERR_PTR(ret);
1258 
1259 	desc = gpiochip_get_desc(chip, gpios[0]);
1260 	if (IS_ERR(desc))
1261 		return desc;
1262 
1263 	if (gpios[1])
1264 		*lflags |= GPIO_ACTIVE_LOW;
1265 
1266 	if (fwnode_property_present(fwnode, "input"))
1267 		*dflags |= GPIOD_IN;
1268 	else if (fwnode_property_present(fwnode, "output-low"))
1269 		*dflags |= GPIOD_OUT_LOW;
1270 	else if (fwnode_property_present(fwnode, "output-high"))
1271 		*dflags |= GPIOD_OUT_HIGH;
1272 	else
1273 		return ERR_PTR(-EINVAL);
1274 
1275 	fwnode_property_read_string(fwnode, "line-name", name);
1276 
1277 	return desc;
1278 }
1279 
1280 static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip)
1281 {
1282 	struct gpio_chip *chip = achip->chip;
1283 	struct fwnode_handle *fwnode;
1284 
1285 	device_for_each_child_node(chip->parent, fwnode) {
1286 		unsigned long lflags;
1287 		enum gpiod_flags dflags;
1288 		struct gpio_desc *desc;
1289 		const char *name;
1290 		int ret;
1291 
1292 		if (!fwnode_property_present(fwnode, "gpio-hog"))
1293 			continue;
1294 
1295 		desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name,
1296 						    &lflags, &dflags);
1297 		if (IS_ERR(desc))
1298 			continue;
1299 
1300 		ret = gpiod_hog(desc, name, lflags, dflags);
1301 		if (ret) {
1302 			dev_err(chip->parent, "Failed to hog GPIO\n");
1303 			fwnode_handle_put(fwnode);
1304 			return;
1305 		}
1306 	}
1307 }
1308 
1309 void acpi_gpiochip_add(struct gpio_chip *chip)
1310 {
1311 	struct acpi_gpio_chip *acpi_gpio;
1312 	struct acpi_device *adev;
1313 	acpi_status status;
1314 
1315 	if (!chip || !chip->parent)
1316 		return;
1317 
1318 	adev = ACPI_COMPANION(chip->parent);
1319 	if (!adev)
1320 		return;
1321 
1322 	acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL);
1323 	if (!acpi_gpio) {
1324 		dev_err(chip->parent,
1325 			"Failed to allocate memory for ACPI GPIO chip\n");
1326 		return;
1327 	}
1328 
1329 	acpi_gpio->chip = chip;
1330 	INIT_LIST_HEAD(&acpi_gpio->events);
1331 	INIT_LIST_HEAD(&acpi_gpio->deferred_req_irqs_list_entry);
1332 
1333 	status = acpi_attach_data(adev->handle, acpi_gpio_chip_dh, acpi_gpio);
1334 	if (ACPI_FAILURE(status)) {
1335 		dev_err(chip->parent, "Failed to attach ACPI GPIO chip\n");
1336 		kfree(acpi_gpio);
1337 		return;
1338 	}
1339 
1340 	acpi_gpiochip_request_regions(acpi_gpio);
1341 	acpi_gpiochip_scan_gpios(acpi_gpio);
1342 	acpi_dev_clear_dependencies(adev);
1343 }
1344 
1345 void acpi_gpiochip_remove(struct gpio_chip *chip)
1346 {
1347 	struct acpi_gpio_chip *acpi_gpio;
1348 	acpi_handle handle;
1349 	acpi_status status;
1350 
1351 	if (!chip || !chip->parent)
1352 		return;
1353 
1354 	handle = ACPI_HANDLE(chip->parent);
1355 	if (!handle)
1356 		return;
1357 
1358 	status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
1359 	if (ACPI_FAILURE(status)) {
1360 		dev_warn(chip->parent, "Failed to retrieve ACPI GPIO chip\n");
1361 		return;
1362 	}
1363 
1364 	acpi_gpiochip_free_regions(acpi_gpio);
1365 
1366 	acpi_detach_data(handle, acpi_gpio_chip_dh);
1367 	kfree(acpi_gpio);
1368 }
1369 
1370 static int acpi_gpio_package_count(const union acpi_object *obj)
1371 {
1372 	const union acpi_object *element = obj->package.elements;
1373 	const union acpi_object *end = element + obj->package.count;
1374 	unsigned int count = 0;
1375 
1376 	while (element < end) {
1377 		switch (element->type) {
1378 		case ACPI_TYPE_LOCAL_REFERENCE:
1379 			element += 3;
1380 			fallthrough;
1381 		case ACPI_TYPE_INTEGER:
1382 			element++;
1383 			count++;
1384 			break;
1385 
1386 		default:
1387 			return -EPROTO;
1388 		}
1389 	}
1390 
1391 	return count;
1392 }
1393 
1394 static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
1395 {
1396 	unsigned int *count = data;
1397 
1398 	if (ares->type == ACPI_RESOURCE_TYPE_GPIO)
1399 		*count += ares->data.gpio.pin_table_length;
1400 
1401 	return 1;
1402 }
1403 
1404 /**
1405  * acpi_gpio_count - count the GPIOs associated with a device / function
1406  * @dev:	GPIO consumer, can be %NULL for system-global GPIOs
1407  * @con_id:	function within the GPIO consumer
1408  *
1409  * Return:
1410  * The number of GPIOs associated with a device / function or %-ENOENT,
1411  * if no GPIO has been assigned to the requested function.
1412  */
1413 int acpi_gpio_count(struct device *dev, const char *con_id)
1414 {
1415 	struct acpi_device *adev = ACPI_COMPANION(dev);
1416 	const union acpi_object *obj;
1417 	const struct acpi_gpio_mapping *gm;
1418 	int count = -ENOENT;
1419 	int ret;
1420 	char propname[32];
1421 	unsigned int i;
1422 
1423 	/* Try first from _DSD */
1424 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
1425 		if (con_id)
1426 			snprintf(propname, sizeof(propname), "%s-%s",
1427 				 con_id, gpio_suffixes[i]);
1428 		else
1429 			snprintf(propname, sizeof(propname), "%s",
1430 				 gpio_suffixes[i]);
1431 
1432 		ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
1433 					    &obj);
1434 		if (ret == 0) {
1435 			if (obj->type == ACPI_TYPE_LOCAL_REFERENCE)
1436 				count = 1;
1437 			else if (obj->type == ACPI_TYPE_PACKAGE)
1438 				count = acpi_gpio_package_count(obj);
1439 		} else if (adev->driver_gpios) {
1440 			for (gm = adev->driver_gpios; gm->name; gm++)
1441 				if (strcmp(propname, gm->name) == 0) {
1442 					count = gm->size;
1443 					break;
1444 				}
1445 		}
1446 		if (count > 0)
1447 			break;
1448 	}
1449 
1450 	/* Then from plain _CRS GPIOs */
1451 	if (count < 0) {
1452 		struct list_head resource_list;
1453 		unsigned int crs_count = 0;
1454 
1455 		if (!acpi_can_fallback_to_crs(adev, con_id))
1456 			return count;
1457 
1458 		INIT_LIST_HEAD(&resource_list);
1459 		acpi_dev_get_resources(adev, &resource_list,
1460 				       acpi_find_gpio_count, &crs_count);
1461 		acpi_dev_free_resource_list(&resource_list);
1462 		if (crs_count > 0)
1463 			count = crs_count;
1464 	}
1465 	return count ? count : -ENOENT;
1466 }
1467 
1468 /* Run deferred acpi_gpiochip_request_irqs() */
1469 static int __init acpi_gpio_handle_deferred_request_irqs(void)
1470 {
1471 	struct acpi_gpio_chip *acpi_gpio, *tmp;
1472 
1473 	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
1474 	list_for_each_entry_safe(acpi_gpio, tmp,
1475 				 &acpi_gpio_deferred_req_irqs_list,
1476 				 deferred_req_irqs_list_entry)
1477 		acpi_gpiochip_request_irqs(acpi_gpio);
1478 
1479 	acpi_gpio_deferred_req_irqs_done = true;
1480 	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
1481 
1482 	return 0;
1483 }
1484 /* We must use _sync so that this runs after the first deferred_probe run */
1485 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
1486 
1487 static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
1488 	{
1489 		/*
1490 		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
1491 		 * a non existing micro-USB-B connector which puts the HDMI
1492 		 * DDC pins in GPIO mode, breaking HDMI support.
1493 		 */
1494 		.matches = {
1495 			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
1496 			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
1497 		},
1498 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1499 			.no_edge_events_on_boot = true,
1500 		},
1501 	},
1502 	{
1503 		/*
1504 		 * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
1505 		 * instead of controlling the actual micro-USB-B turns the 5V
1506 		 * boost for its USB-A connector off. The actual micro-USB-B
1507 		 * connector is wired for charging only.
1508 		 */
1509 		.matches = {
1510 			DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
1511 			DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
1512 		},
1513 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1514 			.no_edge_events_on_boot = true,
1515 		},
1516 	},
1517 	{
1518 		/*
1519 		 * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an
1520 		 * external embedded-controller connected via I2C + an ACPI GPIO
1521 		 * event handler on INT33FFC:02 pin 12, causing spurious wakeups.
1522 		 */
1523 		.matches = {
1524 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
1525 			DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"),
1526 		},
1527 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1528 			.ignore_wake = "INT33FC:02@12",
1529 		},
1530 	},
1531 	{
1532 		/*
1533 		 * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
1534 		 * external embedded-controller connected via I2C + an ACPI GPIO
1535 		 * event handler on INT33FF:01 pin 0, causing spurious wakeups.
1536 		 * When suspending by closing the LID, the power to the USB
1537 		 * keyboard is turned off, causing INT0002 ACPI events to
1538 		 * trigger once the XHCI controller notices the keyboard is
1539 		 * gone. So INT0002 events cause spurious wakeups too. Ignoring
1540 		 * EC wakes breaks wakeup when opening the lid, the user needs
1541 		 * to press the power-button to wakeup the system. The
1542 		 * alternative is suspend simply not working, which is worse.
1543 		 */
1544 		.matches = {
1545 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
1546 			DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
1547 		},
1548 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1549 			.ignore_wake = "INT33FF:01@0,INT0002:00@2",
1550 		},
1551 	},
1552 	{
1553 		/*
1554 		 * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an
1555 		 * external embedded-controller connected via I2C + an ACPI GPIO
1556 		 * event handler on INT33FC:02 pin 28, causing spurious wakeups.
1557 		 */
1558 		.matches = {
1559 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1560 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
1561 			DMI_MATCH(DMI_BOARD_NAME, "815D"),
1562 		},
1563 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1564 			.ignore_wake = "INT33FC:02@28",
1565 		},
1566 	},
1567 	{
1568 		/*
1569 		 * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an
1570 		 * external embedded-controller connected via I2C + an ACPI GPIO
1571 		 * event handler on INT33FF:01 pin 0, causing spurious wakeups.
1572 		 */
1573 		.matches = {
1574 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
1575 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
1576 			DMI_MATCH(DMI_BOARD_NAME, "813E"),
1577 		},
1578 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1579 			.ignore_wake = "INT33FF:01@0",
1580 		},
1581 	},
1582 	{
1583 		/*
1584 		 * Interrupt storm caused from edge triggered floating pin
1585 		 * Found in BIOS UX325UAZ.300
1586 		 * https://bugzilla.kernel.org/show_bug.cgi?id=216208
1587 		 */
1588 		.matches = {
1589 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
1590 			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UAZ_UM325UAZ"),
1591 		},
1592 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1593 			.ignore_interrupt = "AMDI0030:00@18",
1594 		},
1595 	},
1596 	{
1597 		/*
1598 		 * Spurious wakeups from TP_ATTN# pin
1599 		 * Found in BIOS 1.7.8
1600 		 * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
1601 		 */
1602 		.matches = {
1603 			DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
1604 		},
1605 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1606 			.ignore_wake = "ELAN0415:00@9",
1607 		},
1608 	},
1609 	{
1610 		/*
1611 		 * Spurious wakeups from TP_ATTN# pin
1612 		 * Found in BIOS 1.7.8
1613 		 * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
1614 		 */
1615 		.matches = {
1616 			DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
1617 		},
1618 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1619 			.ignore_wake = "ELAN0415:00@9",
1620 		},
1621 	},
1622 	{
1623 		/*
1624 		 * Spurious wakeups from TP_ATTN# pin
1625 		 * Found in BIOS 1.7.7
1626 		 */
1627 		.matches = {
1628 			DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
1629 		},
1630 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1631 			.ignore_wake = "SYNA1202:00@16",
1632 		},
1633 	},
1634 	{
1635 		/*
1636 		 * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
1637 		 * a "dolby" button. At the ACPI level an _AEI event-handler
1638 		 * is connected which sets an ACPI variable to 1 on both
1639 		 * edges. This variable can be polled + cleared to 0 using
1640 		 * WMI. But since the variable is set on both edges the WMI
1641 		 * interface is pretty useless even when polling.
1642 		 * So instead the x86-android-tablets code instantiates
1643 		 * a gpio-keys platform device for it.
1644 		 * Ignore the _AEI handler for the pin, so that it is not busy.
1645 		 */
1646 		.matches = {
1647 			DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"),
1648 			DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
1649 		},
1650 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1651 			.ignore_interrupt = "INT33FC:00@3",
1652 		},
1653 	},
1654 	{
1655 		/*
1656 		 * Spurious wakeups from TP_ATTN# pin
1657 		 * Found in BIOS 0.35
1658 		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3073
1659 		 */
1660 		.matches = {
1661 			DMI_MATCH(DMI_SYS_VENDOR, "GPD"),
1662 			DMI_MATCH(DMI_PRODUCT_NAME, "G1619-04"),
1663 		},
1664 		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
1665 			.ignore_wake = "PNP0C50:00@8",
1666 		},
1667 	},
1668 	{} /* Terminating entry */
1669 };
1670 
1671 static int __init acpi_gpio_setup_params(void)
1672 {
1673 	const struct acpi_gpiolib_dmi_quirk *quirk = NULL;
1674 	const struct dmi_system_id *id;
1675 
1676 	id = dmi_first_match(gpiolib_acpi_quirks);
1677 	if (id)
1678 		quirk = id->driver_data;
1679 
1680 	if (run_edge_events_on_boot < 0) {
1681 		if (quirk && quirk->no_edge_events_on_boot)
1682 			run_edge_events_on_boot = 0;
1683 		else
1684 			run_edge_events_on_boot = 1;
1685 	}
1686 
1687 	if (ignore_wake == NULL && quirk && quirk->ignore_wake)
1688 		ignore_wake = quirk->ignore_wake;
1689 
1690 	if (ignore_interrupt == NULL && quirk && quirk->ignore_interrupt)
1691 		ignore_interrupt = quirk->ignore_interrupt;
1692 
1693 	return 0;
1694 }
1695 
1696 /* Directly after dmi_setup() which runs as core_initcall() */
1697 postcore_initcall(acpi_gpio_setup_params);
1698