1 /* 2 * Copyright © 2015 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 21 * IN THE SOFTWARE. 22 * 23 */ 24 25 /* 26 * Laptops with Intel GPUs which have panels that support controlling the 27 * backlight through DP AUX can actually use two different interfaces: Intel's 28 * proprietary DP AUX backlight interface, and the standard VESA backlight 29 * interface. Unfortunately, at the time of writing this a lot of laptops will 30 * advertise support for the standard VESA backlight interface when they 31 * don't properly support it. However, on these systems the Intel backlight 32 * interface generally does work properly. Additionally, these systems will 33 * usually just indicate that they use PWM backlight controls in their VBIOS 34 * for some reason. 35 */ 36 37 #include "i915_drv.h" 38 #include "intel_backlight.h" 39 #include "intel_display_types.h" 40 #include "intel_dp.h" 41 #include "intel_dp_aux_backlight.h" 42 43 /* TODO: 44 * Implement HDR, right now we just implement the bare minimum to bring us back into SDR mode so we 45 * can make people's backlights work in the mean time 46 */ 47 48 /* 49 * DP AUX registers for Intel's proprietary HDR backlight interface. We define 50 * them here since we'll likely be the only driver to ever use these. 51 */ 52 #define INTEL_EDP_HDR_TCON_CAP0 0x340 53 54 #define INTEL_EDP_HDR_TCON_CAP1 0x341 55 # define INTEL_EDP_HDR_TCON_2084_DECODE_CAP BIT(0) 56 # define INTEL_EDP_HDR_TCON_2020_GAMUT_CAP BIT(1) 57 # define INTEL_EDP_HDR_TCON_TONE_MAPPING_CAP BIT(2) 58 # define INTEL_EDP_HDR_TCON_SEGMENTED_BACKLIGHT_CAP BIT(3) 59 # define INTEL_EDP_HDR_TCON_BRIGHTNESS_NITS_CAP BIT(4) 60 # define INTEL_EDP_HDR_TCON_OPTIMIZATION_CAP BIT(5) 61 # define INTEL_EDP_HDR_TCON_SDP_COLORIMETRY_CAP BIT(6) 62 # define INTEL_EDP_HDR_TCON_SRGB_TO_PANEL_GAMUT_CONVERSION_CAP BIT(7) 63 64 #define INTEL_EDP_HDR_TCON_CAP2 0x342 65 # define INTEL_EDP_SDR_TCON_BRIGHTNESS_AUX_CAP BIT(0) 66 67 #define INTEL_EDP_HDR_TCON_CAP3 0x343 68 69 #define INTEL_EDP_HDR_GETSET_CTRL_PARAMS 0x344 70 # define INTEL_EDP_HDR_TCON_2084_DECODE_ENABLE BIT(0) 71 # define INTEL_EDP_HDR_TCON_2020_GAMUT_ENABLE BIT(1) 72 # define INTEL_EDP_HDR_TCON_TONE_MAPPING_ENABLE BIT(2) /* Pre-TGL+ */ 73 # define INTEL_EDP_HDR_TCON_SEGMENTED_BACKLIGHT_ENABLE BIT(3) 74 # define INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE BIT(4) 75 # define INTEL_EDP_HDR_TCON_SRGB_TO_PANEL_GAMUT_ENABLE BIT(5) 76 /* Bit 6 is reserved */ 77 # define INTEL_EDP_HDR_TCON_SDP_COLORIMETRY_ENABLE BIT(7) 78 79 #define INTEL_EDP_HDR_CONTENT_LUMINANCE 0x346 /* Pre-TGL+ */ 80 #define INTEL_EDP_HDR_PANEL_LUMINANCE_OVERRIDE 0x34A 81 #define INTEL_EDP_SDR_LUMINANCE_LEVEL 0x352 82 #define INTEL_EDP_BRIGHTNESS_NITS_LSB 0x354 83 #define INTEL_EDP_BRIGHTNESS_NITS_MSB 0x355 84 #define INTEL_EDP_BRIGHTNESS_DELAY_FRAMES 0x356 85 #define INTEL_EDP_BRIGHTNESS_PER_FRAME_STEPS 0x357 86 87 #define INTEL_EDP_BRIGHTNESS_OPTIMIZATION_0 0x358 88 # define INTEL_EDP_TCON_USAGE_MASK GENMASK(0, 3) 89 # define INTEL_EDP_TCON_USAGE_UNKNOWN 0x0 90 # define INTEL_EDP_TCON_USAGE_DESKTOP 0x1 91 # define INTEL_EDP_TCON_USAGE_FULL_SCREEN_MEDIA 0x2 92 # define INTEL_EDP_TCON_USAGE_FULL_SCREEN_GAMING 0x3 93 # define INTEL_EDP_TCON_POWER_MASK BIT(4) 94 # define INTEL_EDP_TCON_POWER_DC (0 << 4) 95 # define INTEL_EDP_TCON_POWER_AC (1 << 4) 96 # define INTEL_EDP_TCON_OPTIMIZATION_STRENGTH_MASK GENMASK(5, 7) 97 98 #define INTEL_EDP_BRIGHTNESS_OPTIMIZATION_1 0x359 99 100 enum intel_dp_aux_backlight_modparam { 101 INTEL_DP_AUX_BACKLIGHT_AUTO = -1, 102 INTEL_DP_AUX_BACKLIGHT_OFF = 0, 103 INTEL_DP_AUX_BACKLIGHT_ON = 1, 104 INTEL_DP_AUX_BACKLIGHT_FORCE_VESA = 2, 105 INTEL_DP_AUX_BACKLIGHT_FORCE_INTEL = 3, 106 }; 107 108 static bool is_intel_tcon_cap(const u8 tcon_cap[4]) 109 { 110 return tcon_cap[0] >= 1; 111 } 112 113 /* Intel EDP backlight callbacks */ 114 static bool 115 intel_dp_aux_supports_hdr_backlight(struct intel_connector *connector) 116 { 117 struct drm_i915_private *i915 = to_i915(connector->base.dev); 118 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 119 struct drm_dp_aux *aux = &intel_dp->aux; 120 struct intel_panel *panel = &connector->panel; 121 int ret; 122 u8 tcon_cap[4]; 123 124 intel_dp_wait_source_oui(intel_dp); 125 126 ret = drm_dp_dpcd_read(aux, INTEL_EDP_HDR_TCON_CAP0, tcon_cap, sizeof(tcon_cap)); 127 if (ret != sizeof(tcon_cap)) 128 return false; 129 130 if (!(tcon_cap[1] & INTEL_EDP_HDR_TCON_BRIGHTNESS_NITS_CAP)) 131 return false; 132 133 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Detected %s HDR backlight interface version %d\n", 134 connector->base.base.id, connector->base.name, 135 is_intel_tcon_cap(tcon_cap) ? "Intel" : "unsupported", tcon_cap[0]); 136 137 if (!is_intel_tcon_cap(tcon_cap)) 138 return false; 139 140 /* 141 * If we don't have HDR static metadata there is no way to 142 * runtime detect used range for nits based control. For now 143 * do not use Intel proprietary eDP backlight control if we 144 * don't have this data in panel EDID. In case we find panel 145 * which supports only nits based control, but doesn't provide 146 * HDR static metadata we need to start maintaining table of 147 * ranges for such panels. 148 */ 149 if (i915->params.enable_dpcd_backlight != INTEL_DP_AUX_BACKLIGHT_FORCE_INTEL && 150 !(connector->base.hdr_sink_metadata.hdmi_type1.metadata_type & 151 BIT(HDMI_STATIC_METADATA_TYPE1))) { 152 drm_info(&i915->drm, 153 "[CONNECTOR:%d:%s] Panel is missing HDR static metadata. Possible support for Intel HDR backlight interface is not used. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=%d. needs this, please file a _new_ bug report on drm/i915, see " FDO_BUG_URL " for details.\n", 154 connector->base.base.id, connector->base.name, 155 INTEL_DP_AUX_BACKLIGHT_FORCE_INTEL); 156 return false; 157 } 158 159 panel->backlight.edp.intel.sdr_uses_aux = 160 tcon_cap[2] & INTEL_EDP_SDR_TCON_BRIGHTNESS_AUX_CAP; 161 162 return true; 163 } 164 165 static u32 166 intel_dp_aux_hdr_get_backlight(struct intel_connector *connector, enum pipe pipe) 167 { 168 struct drm_i915_private *i915 = to_i915(connector->base.dev); 169 struct intel_panel *panel = &connector->panel; 170 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 171 u8 tmp; 172 u8 buf[2] = { 0 }; 173 174 if (drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &tmp) != 1) { 175 drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to read current backlight mode from DPCD\n", 176 connector->base.base.id, connector->base.name); 177 return 0; 178 } 179 180 if (!(tmp & INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE)) { 181 if (!panel->backlight.edp.intel.sdr_uses_aux) { 182 u32 pwm_level = panel->backlight.pwm_funcs->get(connector, pipe); 183 184 return intel_backlight_level_from_pwm(connector, pwm_level); 185 } 186 187 /* Assume 100% brightness if backlight controls aren't enabled yet */ 188 return panel->backlight.max; 189 } 190 191 if (drm_dp_dpcd_read(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf, 192 sizeof(buf)) != sizeof(buf)) { 193 drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to read brightness from DPCD\n", 194 connector->base.base.id, connector->base.name); 195 return 0; 196 } 197 198 return (buf[1] << 8 | buf[0]); 199 } 200 201 static void 202 intel_dp_aux_hdr_set_aux_backlight(const struct drm_connector_state *conn_state, u32 level) 203 { 204 struct intel_connector *connector = to_intel_connector(conn_state->connector); 205 struct drm_device *dev = connector->base.dev; 206 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 207 u8 buf[4] = { 0 }; 208 209 buf[0] = level & 0xFF; 210 buf[1] = (level & 0xFF00) >> 8; 211 212 if (drm_dp_dpcd_write(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf, 213 sizeof(buf)) != sizeof(buf)) 214 drm_err(dev, "[CONNECTOR:%d:%s] Failed to write brightness level to DPCD\n", 215 connector->base.base.id, connector->base.name); 216 } 217 218 static void 219 intel_dp_aux_hdr_set_backlight(const struct drm_connector_state *conn_state, u32 level) 220 { 221 struct intel_connector *connector = to_intel_connector(conn_state->connector); 222 struct intel_panel *panel = &connector->panel; 223 224 if (panel->backlight.edp.intel.sdr_uses_aux) { 225 intel_dp_aux_hdr_set_aux_backlight(conn_state, level); 226 } else { 227 const u32 pwm_level = intel_backlight_level_to_pwm(connector, level); 228 229 intel_backlight_set_pwm_level(conn_state, pwm_level); 230 } 231 } 232 233 static void 234 intel_dp_aux_hdr_enable_backlight(const struct intel_crtc_state *crtc_state, 235 const struct drm_connector_state *conn_state, u32 level) 236 { 237 struct intel_connector *connector = to_intel_connector(conn_state->connector); 238 struct intel_panel *panel = &connector->panel; 239 struct drm_i915_private *i915 = to_i915(connector->base.dev); 240 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 241 int ret; 242 u8 old_ctrl, ctrl; 243 244 intel_dp_wait_source_oui(intel_dp); 245 246 ret = drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &old_ctrl); 247 if (ret != 1) { 248 drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to read current backlight control mode: %d\n", 249 connector->base.base.id, connector->base.name, ret); 250 return; 251 } 252 253 ctrl = old_ctrl; 254 if (panel->backlight.edp.intel.sdr_uses_aux) { 255 ctrl |= INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE; 256 intel_dp_aux_hdr_set_aux_backlight(conn_state, level); 257 } else { 258 u32 pwm_level = intel_backlight_level_to_pwm(connector, level); 259 260 panel->backlight.pwm_funcs->enable(crtc_state, conn_state, pwm_level); 261 262 ctrl &= ~INTEL_EDP_HDR_TCON_BRIGHTNESS_AUX_ENABLE; 263 } 264 265 if (ctrl != old_ctrl && 266 drm_dp_dpcd_writeb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, ctrl) != 1) 267 drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to configure DPCD brightness controls\n", 268 connector->base.base.id, connector->base.name); 269 } 270 271 static void 272 intel_dp_aux_hdr_disable_backlight(const struct drm_connector_state *conn_state, u32 level) 273 { 274 struct intel_connector *connector = to_intel_connector(conn_state->connector); 275 struct intel_panel *panel = &connector->panel; 276 277 /* Nothing to do for AUX based backlight controls */ 278 if (panel->backlight.edp.intel.sdr_uses_aux) 279 return; 280 281 /* Note we want the actual pwm_level to be 0, regardless of pwm_min */ 282 panel->backlight.pwm_funcs->disable(conn_state, intel_backlight_invert_pwm_level(connector, 0)); 283 } 284 285 static const char *dpcd_vs_pwm_str(bool aux) 286 { 287 return aux ? "DPCD" : "PWM"; 288 } 289 290 static int 291 intel_dp_aux_hdr_setup_backlight(struct intel_connector *connector, enum pipe pipe) 292 { 293 struct drm_i915_private *i915 = to_i915(connector->base.dev); 294 struct intel_panel *panel = &connector->panel; 295 struct drm_luminance_range_info *luminance_range = 296 &connector->base.display_info.luminance_range; 297 int ret; 298 299 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] SDR backlight is controlled through %s\n", 300 connector->base.base.id, connector->base.name, 301 dpcd_vs_pwm_str(panel->backlight.edp.intel.sdr_uses_aux)); 302 303 if (!panel->backlight.edp.intel.sdr_uses_aux) { 304 ret = panel->backlight.pwm_funcs->setup(connector, pipe); 305 if (ret < 0) { 306 drm_err(&i915->drm, 307 "[CONNECTOR:%d:%s] Failed to setup SDR backlight controls through PWM: %d\n", 308 connector->base.base.id, connector->base.name, ret); 309 return ret; 310 } 311 } 312 313 if (luminance_range->max_luminance) { 314 panel->backlight.max = luminance_range->max_luminance; 315 panel->backlight.min = luminance_range->min_luminance; 316 } else { 317 panel->backlight.max = 512; 318 panel->backlight.min = 0; 319 } 320 321 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Using AUX HDR interface for backlight control (range %d..%d)\n", 322 connector->base.base.id, connector->base.name, 323 panel->backlight.min, panel->backlight.max); 324 325 326 panel->backlight.level = intel_dp_aux_hdr_get_backlight(connector, pipe); 327 panel->backlight.enabled = panel->backlight.level != 0; 328 329 return 0; 330 } 331 332 /* VESA backlight callbacks */ 333 static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, enum pipe unused) 334 { 335 return connector->panel.backlight.level; 336 } 337 338 static void 339 intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state, u32 level) 340 { 341 struct intel_connector *connector = to_intel_connector(conn_state->connector); 342 struct intel_panel *panel = &connector->panel; 343 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 344 345 if (!panel->backlight.edp.vesa.info.aux_set) { 346 const u32 pwm_level = intel_backlight_level_to_pwm(connector, level); 347 348 intel_backlight_set_pwm_level(conn_state, pwm_level); 349 } 350 351 drm_edp_backlight_set_level(&intel_dp->aux, &panel->backlight.edp.vesa.info, level); 352 } 353 354 static void 355 intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state, 356 const struct drm_connector_state *conn_state, u32 level) 357 { 358 struct intel_connector *connector = to_intel_connector(conn_state->connector); 359 struct intel_panel *panel = &connector->panel; 360 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 361 362 if (!panel->backlight.edp.vesa.info.aux_enable) { 363 u32 pwm_level; 364 365 if (!panel->backlight.edp.vesa.info.aux_set) 366 pwm_level = intel_backlight_level_to_pwm(connector, level); 367 else 368 pwm_level = intel_backlight_invert_pwm_level(connector, 369 panel->backlight.pwm_level_max); 370 371 panel->backlight.pwm_funcs->enable(crtc_state, conn_state, pwm_level); 372 } 373 374 drm_edp_backlight_enable(&intel_dp->aux, &panel->backlight.edp.vesa.info, level); 375 } 376 377 static void intel_dp_aux_vesa_disable_backlight(const struct drm_connector_state *old_conn_state, 378 u32 level) 379 { 380 struct intel_connector *connector = to_intel_connector(old_conn_state->connector); 381 struct intel_panel *panel = &connector->panel; 382 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 383 384 drm_edp_backlight_disable(&intel_dp->aux, &panel->backlight.edp.vesa.info); 385 386 if (!panel->backlight.edp.vesa.info.aux_enable) 387 panel->backlight.pwm_funcs->disable(old_conn_state, 388 intel_backlight_invert_pwm_level(connector, 0)); 389 } 390 391 static int intel_dp_aux_vesa_setup_backlight(struct intel_connector *connector, enum pipe pipe) 392 { 393 struct intel_dp *intel_dp = intel_attached_dp(connector); 394 struct intel_panel *panel = &connector->panel; 395 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 396 u16 current_level; 397 u8 current_mode; 398 int ret; 399 400 ret = drm_edp_backlight_init(&intel_dp->aux, &panel->backlight.edp.vesa.info, 401 panel->vbt.backlight.pwm_freq_hz, intel_dp->edp_dpcd, 402 ¤t_level, ¤t_mode); 403 if (ret < 0) 404 return ret; 405 406 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] AUX VESA backlight enable is controlled through %s\n", 407 connector->base.base.id, connector->base.name, 408 dpcd_vs_pwm_str(panel->backlight.edp.vesa.info.aux_enable)); 409 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] AUX VESA backlight level is controlled through %s\n", 410 connector->base.base.id, connector->base.name, 411 dpcd_vs_pwm_str(panel->backlight.edp.vesa.info.aux_set)); 412 413 if (!panel->backlight.edp.vesa.info.aux_set || !panel->backlight.edp.vesa.info.aux_enable) { 414 ret = panel->backlight.pwm_funcs->setup(connector, pipe); 415 if (ret < 0) { 416 drm_err(&i915->drm, 417 "[CONNECTOR:%d:%s] Failed to setup PWM backlight controls for eDP backlight: %d\n", 418 connector->base.base.id, connector->base.name, ret); 419 return ret; 420 } 421 } 422 423 if (panel->backlight.edp.vesa.info.aux_set) { 424 panel->backlight.max = panel->backlight.edp.vesa.info.max; 425 panel->backlight.min = 0; 426 if (current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) { 427 panel->backlight.level = current_level; 428 panel->backlight.enabled = panel->backlight.level != 0; 429 } else { 430 panel->backlight.level = panel->backlight.max; 431 panel->backlight.enabled = false; 432 } 433 } else { 434 panel->backlight.max = panel->backlight.pwm_level_max; 435 panel->backlight.min = panel->backlight.pwm_level_min; 436 if (current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_PWM) { 437 panel->backlight.level = panel->backlight.pwm_funcs->get(connector, pipe); 438 panel->backlight.enabled = panel->backlight.pwm_enabled; 439 } else { 440 panel->backlight.level = panel->backlight.max; 441 panel->backlight.enabled = false; 442 } 443 } 444 445 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Using AUX VESA interface for backlight control\n", 446 connector->base.base.id, connector->base.name); 447 448 return 0; 449 } 450 451 static bool 452 intel_dp_aux_supports_vesa_backlight(struct intel_connector *connector) 453 { 454 struct intel_dp *intel_dp = intel_attached_dp(connector); 455 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 456 457 if (drm_edp_backlight_supported(intel_dp->edp_dpcd)) { 458 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] AUX Backlight Control Supported!\n", 459 connector->base.base.id, connector->base.name); 460 return true; 461 } 462 return false; 463 } 464 465 static const struct intel_panel_bl_funcs intel_dp_hdr_bl_funcs = { 466 .setup = intel_dp_aux_hdr_setup_backlight, 467 .enable = intel_dp_aux_hdr_enable_backlight, 468 .disable = intel_dp_aux_hdr_disable_backlight, 469 .set = intel_dp_aux_hdr_set_backlight, 470 .get = intel_dp_aux_hdr_get_backlight, 471 }; 472 473 static const struct intel_panel_bl_funcs intel_dp_vesa_bl_funcs = { 474 .setup = intel_dp_aux_vesa_setup_backlight, 475 .enable = intel_dp_aux_vesa_enable_backlight, 476 .disable = intel_dp_aux_vesa_disable_backlight, 477 .set = intel_dp_aux_vesa_set_backlight, 478 .get = intel_dp_aux_vesa_get_backlight, 479 }; 480 481 int intel_dp_aux_init_backlight_funcs(struct intel_connector *connector) 482 { 483 struct drm_device *dev = connector->base.dev; 484 struct intel_panel *panel = &connector->panel; 485 struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder); 486 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 487 bool try_intel_interface = false, try_vesa_interface = false; 488 489 /* Check the VBT and user's module parameters to figure out which 490 * interfaces to probe 491 */ 492 switch (i915->params.enable_dpcd_backlight) { 493 case INTEL_DP_AUX_BACKLIGHT_OFF: 494 return -ENODEV; 495 case INTEL_DP_AUX_BACKLIGHT_AUTO: 496 switch (panel->vbt.backlight.type) { 497 case INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE: 498 try_vesa_interface = true; 499 break; 500 case INTEL_BACKLIGHT_DISPLAY_DDI: 501 try_intel_interface = true; 502 break; 503 default: 504 return -ENODEV; 505 } 506 break; 507 case INTEL_DP_AUX_BACKLIGHT_ON: 508 if (panel->vbt.backlight.type != INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE) 509 try_intel_interface = true; 510 511 try_vesa_interface = true; 512 break; 513 case INTEL_DP_AUX_BACKLIGHT_FORCE_VESA: 514 try_vesa_interface = true; 515 break; 516 case INTEL_DP_AUX_BACKLIGHT_FORCE_INTEL: 517 try_intel_interface = true; 518 break; 519 } 520 521 /* 522 * Since Intel has their own backlight control interface, the majority of machines out there 523 * using DPCD backlight controls with Intel GPUs will be using this interface as opposed to 524 * the VESA interface. However, other GPUs (such as Nvidia's) will always use the VESA 525 * interface. This means that there's quite a number of panels out there that will advertise 526 * support for both interfaces, primarily systems with Intel/Nvidia hybrid GPU setups. 527 * 528 * There's a catch to this though: on many panels that advertise support for both 529 * interfaces, the VESA backlight interface will stop working once we've programmed the 530 * panel with Intel's OUI - which is also required for us to be able to detect Intel's 531 * backlight interface at all. This means that the only sensible way for us to detect both 532 * interfaces is to probe for Intel's first, and VESA's second. 533 */ 534 if (try_intel_interface && intel_dp_aux_supports_hdr_backlight(connector)) { 535 drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Using Intel proprietary eDP backlight controls\n", 536 connector->base.base.id, connector->base.name); 537 panel->backlight.funcs = &intel_dp_hdr_bl_funcs; 538 return 0; 539 } 540 541 if (try_vesa_interface && intel_dp_aux_supports_vesa_backlight(connector)) { 542 drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Using VESA eDP backlight controls\n", 543 connector->base.base.id, connector->base.name); 544 panel->backlight.funcs = &intel_dp_vesa_bl_funcs; 545 return 0; 546 } 547 548 return -ENODEV; 549 } 550