xref: /linux/drivers/gpu/drm/panel/Kconfig (revision 52338415) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_LVDS
22	tristate "Generic LVDS panel driver"
23	depends on OF
24	depends on BACKLIGHT_CLASS_DEVICE
25	select VIDEOMODE_HELPERS
26	help
27	  This driver supports LVDS panels that don't require device-specific
28	  handling of power supplies or control signals. It implements automatic
29	  backlight handling if the panel is attached to a backlight controller.
30
31config DRM_PANEL_SIMPLE
32	tristate "support for simple panels"
33	depends on OF
34	depends on BACKLIGHT_CLASS_DEVICE
35	select VIDEOMODE_HELPERS
36	help
37	  DRM panel driver for dumb panels that need at most a regulator and
38	  a GPIO to be powered up. Optionally a backlight can be attached so
39	  that it can be automatically turned off when the panel goes into a
40	  low power state.
41
42config DRM_PANEL_FEIYANG_FY07024DI26A30D
43	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y if you want to enable support for panels based on the
49	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
50
51config DRM_PANEL_ILITEK_IL9322
52	tristate "Ilitek ILI9322 320x240 QVGA panels"
53	depends on OF && SPI
54	select REGMAP
55	help
56	  Say Y here if you want to enable support for Ilitek IL9322
57	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
58
59config DRM_PANEL_ILITEK_ILI9881C
60	tristate "Ilitek ILI9881C-based panels"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y if you want to enable support for panels based on the
66	  Ilitek ILI9881c controller.
67
68config DRM_PANEL_INNOLUX_P079ZCA
69	tristate "Innolux P079ZCA panel"
70	depends on OF
71	depends on DRM_MIPI_DSI
72	depends on BACKLIGHT_CLASS_DEVICE
73	help
74	  Say Y here if you want to enable support for Innolux P079ZCA
75	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
76	  24 bit RGB per pixel. It provides a MIPI DSI interface to
77	  the host and has a built-in LED backlight.
78
79config DRM_PANEL_JDI_LT070ME05000
80	tristate "JDI LT070ME05000 WUXGA DSI panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for JDI DSI video mode
86	  panel as found in Google Nexus 7 (2013) devices.
87	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
88	  24 bit per pixel.
89
90config DRM_PANEL_KINGDISPLAY_KD097D04
91	tristate "Kingdisplay kd097d04 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to enable support for Kingdisplay kd097d04
97	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
98	  24 bit RGB per pixel. It provides a MIPI DSI interface to
99	  the host and has a built-in LED backlight.
100
101config DRM_PANEL_SAMSUNG_LD9040
102	tristate "Samsung LD9040 RGB/SPI panel"
103	depends on OF && SPI
104	select VIDEOMODE_HELPERS
105
106config DRM_PANEL_LG_LB035Q02
107	tristate "LG LB035Q024573 RGB panel"
108	depends on GPIOLIB && OF && SPI
109	help
110	  Say Y here if you want to enable support for the LB035Q02 RGB panel
111	  (found on the Gumstix Overo Palo35 board). To compile this driver as
112	  a module, choose M here.
113
114config DRM_PANEL_LG_LG4573
115	tristate "LG4573 RGB/SPI panel"
116	depends on OF && SPI
117	select VIDEOMODE_HELPERS
118	help
119	  Say Y here if you want to enable support for LG4573 RGB panel.
120	  To compile this driver as a module, choose M here.
121
122config DRM_PANEL_NEC_NL8048HL11
123	tristate "NEC NL8048HL11 RGB panel"
124	depends on GPIOLIB && OF && SPI
125	help
126	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
127	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
128	  as a module, choose M here.
129
130config DRM_PANEL_NOVATEK_NT39016
131	tristate "Novatek NT39016 RGB/SPI panel"
132	depends on OF && SPI
133	depends on BACKLIGHT_CLASS_DEVICE
134	select REGMAP_SPI
135	help
136	  Say Y here if you want to enable support for the panels built
137	  around the Novatek NT39016 display controller.
138
139config DRM_PANEL_OLIMEX_LCD_OLINUXINO
140	tristate "Olimex LCD-OLinuXino panel"
141	depends on OF
142	depends on I2C
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  The panel is used with different sizes LCDs, from 480x272 to
146	  1280x800, and 24 bit per pixel.
147
148	  Say Y here if you want to enable support for Olimex Ltd.
149	  LCD-OLinuXino panel.
150
151config DRM_PANEL_ORISETECH_OTM8009A
152	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
153	depends on OF
154	depends on DRM_MIPI_DSI
155	depends on BACKLIGHT_CLASS_DEVICE
156	help
157	  Say Y here if you want to enable support for Orise Technology
158	  otm8009a 480x800 dsi 2dl panel.
159
160config DRM_PANEL_OSD_OSD101T2587_53TS
161	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
162	depends on OF
163	depends on DRM_MIPI_DSI
164	depends on BACKLIGHT_CLASS_DEVICE
165	help
166	  Say Y here if you want to enable support for One Stop Displays
167	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
168
169config DRM_PANEL_PANASONIC_VVX10F034N00
170	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
171	depends on OF
172	depends on DRM_MIPI_DSI
173	depends on BACKLIGHT_CLASS_DEVICE
174	help
175	  Say Y here if you want to enable support for Panasonic VVX10F034N00
176	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
177	  Xperia Z2 tablets
178
179config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
180	tristate "Raspberry Pi 7-inch touchscreen panel"
181	depends on DRM_MIPI_DSI
182	help
183	  Say Y here if you want to enable support for the Raspberry
184	  Pi 7" Touchscreen.  To compile this driver as a module,
185	  choose M here.
186
187config DRM_PANEL_RAYDIUM_RM67191
188	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
189	depends on OF
190	depends on DRM_MIPI_DSI
191	depends on BACKLIGHT_CLASS_DEVICE
192	help
193	  Say Y here if you want to enable support for Raydium RM67191 FHD
194	  (1080x1920) DSI panel.
195
196config DRM_PANEL_RAYDIUM_RM68200
197	tristate "Raydium RM68200 720x1280 DSI video mode panel"
198	depends on OF
199	depends on DRM_MIPI_DSI
200	depends on BACKLIGHT_CLASS_DEVICE
201	help
202	  Say Y here if you want to enable support for Raydium RM68200
203	  720x1280 DSI video mode panel.
204
205config DRM_PANEL_ROCKTECH_JH057N00900
206	tristate "Rocktech JH057N00900 MIPI touchscreen panel"
207	depends on OF
208	depends on DRM_MIPI_DSI
209	depends on BACKLIGHT_CLASS_DEVICE
210	help
211	  Say Y here if you want to enable support for Rocktech JH057N00900
212	  MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
213	  resolution of 720x1440 pixels, a built in backlight and touch
214	  controller.
215	  Touch input support is provided by the goodix driver and needs to be
216	  selected separately.
217
218config DRM_PANEL_RONBO_RB070D30
219	tristate "Ronbo Electronics RB070D30 panel"
220	depends on OF
221	depends on DRM_MIPI_DSI
222	depends on BACKLIGHT_CLASS_DEVICE
223	help
224	  Say Y here if you want to enable support for Ronbo Electronics
225	  RB070D30 1024x600 DSI panel.
226
227config DRM_PANEL_SAMSUNG_S6D16D0
228	tristate "Samsung S6D16D0 DSI video mode panel"
229	depends on OF
230	depends on DRM_MIPI_DSI
231	select VIDEOMODE_HELPERS
232
233config DRM_PANEL_SAMSUNG_S6E3HA2
234	tristate "Samsung S6E3HA2 DSI video mode panel"
235	depends on OF
236	depends on DRM_MIPI_DSI
237	depends on BACKLIGHT_CLASS_DEVICE
238	select VIDEOMODE_HELPERS
239
240config DRM_PANEL_SAMSUNG_S6E63J0X03
241	tristate "Samsung S6E63J0X03 DSI command mode panel"
242	depends on OF
243	depends on DRM_MIPI_DSI
244	depends on BACKLIGHT_CLASS_DEVICE
245	select VIDEOMODE_HELPERS
246
247config DRM_PANEL_SAMSUNG_S6E63M0
248	tristate "Samsung S6E63M0 RGB/SPI panel"
249	depends on OF
250	depends on SPI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for Samsung S6E63M0
254	  AMOLED LCD panel.
255
256config DRM_PANEL_SAMSUNG_S6E8AA0
257	tristate "Samsung S6E8AA0 DSI video mode panel"
258	depends on OF
259	select DRM_MIPI_DSI
260	select VIDEOMODE_HELPERS
261
262config DRM_PANEL_SEIKO_43WVF1G
263	tristate "Seiko 43WVF1G panel"
264	depends on OF
265	depends on BACKLIGHT_CLASS_DEVICE
266	select VIDEOMODE_HELPERS
267	help
268	  Say Y here if you want to enable support for the Seiko
269	  43WVF1G controller for 800x480 LCD panels
270
271config DRM_PANEL_SHARP_LQ101R1SX01
272	tristate "Sharp LQ101R1SX01 panel"
273	depends on OF
274	depends on DRM_MIPI_DSI
275	depends on BACKLIGHT_CLASS_DEVICE
276	help
277	  Say Y here if you want to enable support for Sharp LQ101R1SX01
278	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
279	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
280	  the host and has a built-in LED backlight.
281
282	  To compile this driver as a module, choose M here: the module
283	  will be called panel-sharp-lq101r1sx01.
284
285config DRM_PANEL_SHARP_LS037V7DW01
286	tristate "Sharp LS037V7DW01 VGA LCD panel"
287	depends on GPIOLIB && OF && REGULATOR
288	help
289	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
290	  (480x640) LCD panel (found on the TI SDP3430 board).
291
292config DRM_PANEL_SHARP_LS043T1LE01
293	tristate "Sharp LS043T1LE01 qHD video mode panel"
294	depends on OF
295	depends on DRM_MIPI_DSI
296	depends on BACKLIGHT_CLASS_DEVICE
297	help
298	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
299	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
300
301config DRM_PANEL_SITRONIX_ST7701
302	tristate "Sitronix ST7701 panel driver"
303	depends on OF
304	depends on DRM_MIPI_DSI
305	depends on BACKLIGHT_CLASS_DEVICE
306	help
307	  Say Y here if you want to enable support for the Sitronix
308	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
309	  system interfaces.
310
311config DRM_PANEL_SITRONIX_ST7789V
312	tristate "Sitronix ST7789V panel"
313	depends on OF && SPI
314	depends on BACKLIGHT_CLASS_DEVICE
315	help
316	  Say Y here if you want to enable support for the Sitronix
317	  ST7789V controller for 240x320 LCD panels
318
319config DRM_PANEL_SONY_ACX565AKM
320	tristate "Sony ACX565AKM panel"
321	depends on GPIOLIB && OF && SPI
322	depends on BACKLIGHT_CLASS_DEVICE
323	help
324	  Say Y here if you want to enable support for the Sony ACX565AKM
325	  800x600 3.5" panel (found on the Nokia N900).
326
327config DRM_PANEL_TPO_TD028TTEC1
328	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
329	depends on OF && SPI
330	depends on BACKLIGHT_CLASS_DEVICE
331	help
332	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
333	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
334
335config DRM_PANEL_TPO_TD043MTEA1
336	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
337	depends on GPIOLIB && OF && REGULATOR && SPI
338	help
339	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
340	  4.3" panel (found on the OMAP3 Pandora board).
341
342config DRM_PANEL_TPO_TPG110
343	tristate "TPO TPG 800x400 panel"
344	depends on OF && SPI && GPIOLIB
345	depends on BACKLIGHT_CLASS_DEVICE
346	help
347	  Say Y here if you want to enable support for TPO TPG110
348	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
349	  800x400 LCD panels.
350
351config DRM_PANEL_TRULY_NT35597_WQXGA
352	tristate "Truly WQXGA"
353	depends on OF
354	depends on DRM_MIPI_DSI
355	help
356	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
357	  Video Mode panel
358endmenu
359