1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TV101WUM_NL6 71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 77 45NA WUXGA PANEL DSI Video Mode panel 78 79config DRM_PANEL_DSI_CM 80 tristate "Generic DSI command mode panels" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 DRM panel driver for DSI command mode panels with support for 86 embedded and external backlights. 87 88config DRM_PANEL_LVDS 89 tristate "Generic LVDS panel driver" 90 depends on OF 91 depends on BACKLIGHT_CLASS_DEVICE 92 select VIDEOMODE_HELPERS 93 help 94 This driver supports LVDS panels that don't require device-specific 95 handling of power supplies or control signals. It implements automatic 96 backlight handling if the panel is attached to a backlight controller. 97 98config DRM_PANEL_SIMPLE 99 tristate "support for simple panels (other than eDP ones)" 100 depends on OF 101 depends on BACKLIGHT_CLASS_DEVICE 102 depends on PM 103 select VIDEOMODE_HELPERS 104 help 105 DRM panel driver for dumb non-eDP panels that need at most a regulator 106 and a GPIO to be powered up. Optionally a backlight can be attached so 107 that it can be automatically turned off when the panel goes into a 108 low power state. 109 110config DRM_PANEL_EDP 111 tristate "support for simple Embedded DisplayPort panels" 112 depends on OF 113 depends on BACKLIGHT_CLASS_DEVICE 114 depends on PM 115 select VIDEOMODE_HELPERS 116 select DRM_DISPLAY_DP_HELPER 117 select DRM_DISPLAY_HELPER 118 select DRM_DP_AUX_BUS 119 select DRM_KMS_HELPER 120 help 121 DRM panel driver for dumb eDP panels that need at most a regulator and 122 a GPIO to be powered up. Optionally a backlight can be attached so 123 that it can be automatically turned off when the panel goes into a 124 low power state. 125 126config DRM_PANEL_EBBG_FT8719 127 tristate "EBBG FT8719 panel driver" 128 depends on OF 129 depends on DRM_MIPI_DSI 130 depends on BACKLIGHT_CLASS_DEVICE 131 help 132 Say Y here if you want to enable support for the EBBG FT8719 133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 134 The panel has a resolution of 1080x2246. It provides a MIPI DSI 135 interface to the host. 136 137config DRM_PANEL_ELIDA_KD35T133 138 tristate "Elida KD35T133 panel driver" 139 depends on OF 140 depends on DRM_MIPI_DSI 141 depends on BACKLIGHT_CLASS_DEVICE 142 help 143 Say Y here if you want to enable support for the Elida 144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 145 system interfaces. 146 147config DRM_PANEL_FEIXIN_K101_IM2BA02 148 tristate "Feixin K101 IM2BA02 panel" 149 depends on OF 150 depends on DRM_MIPI_DSI 151 depends on BACKLIGHT_CLASS_DEVICE 152 help 153 Say Y here if you want to enable support for the Feixin K101 IM2BA02 154 4-lane 800x1280 MIPI DSI panel. 155 156config DRM_PANEL_FEIYANG_FY07024DI26A30D 157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 158 depends on OF 159 depends on DRM_MIPI_DSI 160 depends on BACKLIGHT_CLASS_DEVICE 161 help 162 Say Y if you want to enable support for panels based on the 163 Feiyang FY07024DI26A30-D MIPI-DSI interface. 164 165config DRM_PANEL_HIMAX_HX8394 166 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 167 depends on OF 168 depends on DRM_MIPI_DSI 169 depends on BACKLIGHT_CLASS_DEVICE 170 help 171 Say Y if you want to enable support for panels based on the 172 Himax HX8394 controller, such as the HannStar HSD060BHW4 173 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 174 175 If M is selected the module will be called panel-himax-hx8394. 176 177config DRM_PANEL_ILITEK_IL9322 178 tristate "Ilitek ILI9322 320x240 QVGA panels" 179 depends on OF && SPI 180 select REGMAP 181 help 182 Say Y here if you want to enable support for Ilitek IL9322 183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 184 185config DRM_PANEL_ILITEK_ILI9341 186 tristate "Ilitek ILI9341 240x320 QVGA panels" 187 depends on OF && SPI 188 select DRM_KMS_HELPER 189 select DRM_GEM_DMA_HELPER 190 depends on BACKLIGHT_CLASS_DEVICE 191 select DRM_MIPI_DBI 192 help 193 Say Y here if you want to enable support for Ilitek IL9341 194 QVGA (240x320) RGB panels. support serial & parallel rgb 195 interface. 196 197config DRM_PANEL_ILITEK_ILI9881C 198 tristate "Ilitek ILI9881C-based panels" 199 depends on OF 200 depends on DRM_MIPI_DSI 201 depends on BACKLIGHT_CLASS_DEVICE 202 help 203 Say Y if you want to enable support for panels based on the 204 Ilitek ILI9881c controller. 205 206config DRM_PANEL_INNOLUX_EJ030NA 207 tristate "Innolux EJ030NA 320x480 LCD panel" 208 depends on OF && SPI 209 select REGMAP_SPI 210 help 211 Say Y here to enable support for the Innolux/Chimei EJ030NA 212 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 213 and LDK handheld gaming consoles. 214 215config DRM_PANEL_INNOLUX_P079ZCA 216 tristate "Innolux P079ZCA panel" 217 depends on OF 218 depends on DRM_MIPI_DSI 219 depends on BACKLIGHT_CLASS_DEVICE 220 help 221 Say Y here if you want to enable support for Innolux P079ZCA 222 TFT-LCD modules. The panel has a 1024x768 resolution and uses 223 24 bit RGB per pixel. It provides a MIPI DSI interface to 224 the host and has a built-in LED backlight. 225 226config DRM_PANEL_JADARD_JD9365DA_H3 227 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Jadard JD9365DA-H3 233 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 234 800RGBx1280 dots at maximum. 235 236config DRM_PANEL_JDI_LT070ME05000 237 tristate "JDI LT070ME05000 WUXGA DSI panel" 238 depends on OF 239 depends on DRM_MIPI_DSI 240 depends on BACKLIGHT_CLASS_DEVICE 241 help 242 Say Y here if you want to enable support for JDI DSI video mode 243 panel as found in Google Nexus 7 (2013) devices. 244 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 245 24 bit per pixel. 246 247config DRM_PANEL_JDI_R63452 248 tristate "JDI R63452 Full HD DSI panel" 249 depends on OF 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for the JDI R63452 254 DSI command mode panel as found in Xiaomi Mi 5 Devices. 255 256config DRM_PANEL_KHADAS_TS050 257 tristate "Khadas TS050 panel" 258 depends on OF 259 depends on DRM_MIPI_DSI 260 depends on BACKLIGHT_CLASS_DEVICE 261 help 262 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 263 panel module. The panel has a 1080x1920 resolution and uses 264 24 bit RGB per pixel. It provides a MIPI DSI interface to 265 the host, a built-in LED backlight and touch controller. 266 267config DRM_PANEL_KINGDISPLAY_KD097D04 268 tristate "Kingdisplay kd097d04 panel" 269 depends on OF 270 depends on DRM_MIPI_DSI 271 depends on BACKLIGHT_CLASS_DEVICE 272 help 273 Say Y here if you want to enable support for Kingdisplay kd097d04 274 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 275 24 bit RGB per pixel. It provides a MIPI DSI interface to 276 the host and has a built-in LED backlight. 277 278config DRM_PANEL_LEADTEK_LTK050H3146W 279 tristate "Leadtek LTK050H3146W panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Leadtek LTK050H3146W 285 TFT-LCD modules. The panel has a 720x1280 resolution and uses 286 24 bit RGB per pixel. It provides a MIPI DSI interface to 287 the host and has a built-in LED backlight. 288 289config DRM_PANEL_LEADTEK_LTK500HD1829 290 tristate "Leadtek LTK500HD1829 panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Kingdisplay kd097d04 296 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 297 24 bit RGB per pixel. It provides a MIPI DSI interface to 298 the host and has a built-in LED backlight. 299 300config DRM_PANEL_SAMSUNG_LD9040 301 tristate "Samsung LD9040 RGB/SPI panel" 302 depends on OF && SPI 303 depends on BACKLIGHT_CLASS_DEVICE 304 select VIDEOMODE_HELPERS 305 306config DRM_PANEL_LG_LB035Q02 307 tristate "LG LB035Q024573 RGB panel" 308 depends on GPIOLIB && OF && SPI 309 help 310 Say Y here if you want to enable support for the LB035Q02 RGB panel 311 (found on the Gumstix Overo Palo35 board). To compile this driver as 312 a module, choose M here. 313 314config DRM_PANEL_LG_LG4573 315 tristate "LG4573 RGB/SPI panel" 316 depends on OF && SPI 317 select VIDEOMODE_HELPERS 318 help 319 Say Y here if you want to enable support for LG4573 RGB panel. 320 To compile this driver as a module, choose M here. 321 322config DRM_PANEL_MAGNACHIP_D53E6EA8966 323 tristate "Magnachip D53E6EA8966 DSI panel" 324 depends on OF && SPI 325 depends on DRM_MIPI_DSI 326 depends on BACKLIGHT_CLASS_DEVICE 327 select DRM_MIPI_DBI 328 help 329 DRM panel driver for the Samsung AMS495QA01 panel controlled 330 with the Magnachip D53E6EA8966 panel IC. This panel receives 331 video data via DSI but commands via 9-bit SPI using DBI. 332 333config DRM_PANEL_NEC_NL8048HL11 334 tristate "NEC NL8048HL11 RGB panel" 335 depends on GPIOLIB && OF && SPI 336 help 337 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 338 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 339 as a module, choose M here. 340 341config DRM_PANEL_NEWVISION_NV3051D 342 tristate "NewVision NV3051D DSI panel" 343 depends on OF 344 depends on DRM_MIPI_DSI 345 depends on BACKLIGHT_CLASS_DEVICE 346 help 347 This driver supports the NV3051D based panel found on the Anbernic 348 RG353P and RG353V. 349 350config DRM_PANEL_NEWVISION_NV3052C 351 tristate "NewVision NV3052C RGB/SPI panel" 352 depends on OF && SPI 353 depends on BACKLIGHT_CLASS_DEVICE 354 select DRM_MIPI_DBI 355 help 356 Say Y here if you want to enable support for the panels built 357 around the NewVision NV3052C display controller. 358 359config DRM_PANEL_NOVATEK_NT35510 360 tristate "Novatek NT35510 RGB panel driver" 361 depends on OF 362 depends on DRM_MIPI_DSI 363 depends on BACKLIGHT_CLASS_DEVICE 364 help 365 Say Y here if you want to enable support for the panels built 366 around the Novatek NT35510 display controller, such as some 367 Hydis panels. 368 369config DRM_PANEL_NOVATEK_NT35560 370 tristate "Novatek NT35560 DSI command mode panel" 371 depends on OF 372 depends on DRM_MIPI_DSI 373 depends on BACKLIGHT_CLASS_DEVICE 374 select VIDEOMODE_HELPERS 375 help 376 Say Y here if you want to enable the Novatek NT35560 display 377 controller. This panel supports DSI in both command and video 378 mode. This supports several panels such as Sony ACX424AKM and 379 ACX424AKP. 380 381config DRM_PANEL_NOVATEK_NT35950 382 tristate "Novatek NT35950 DSI panel" 383 depends on OF 384 depends on DRM_MIPI_DSI 385 depends on BACKLIGHT_CLASS_DEVICE 386 help 387 Say Y here if you want to enable support for the panels built 388 around the Novatek NT35950 display controller, such as some 389 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 390 mobile phones. 391 392config DRM_PANEL_NOVATEK_NT36523 393 tristate "Novatek NT36523 panel driver" 394 depends on OF 395 depends on DRM_MIPI_DSI 396 depends on BACKLIGHT_CLASS_DEVICE 397 help 398 Say Y here if you want to enable support for the panels built 399 around the Novatek NT36523 display controller, such as some 400 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 401 402config DRM_PANEL_NOVATEK_NT36672A 403 tristate "Novatek NT36672A DSI panel" 404 depends on OF 405 depends on DRM_MIPI_DSI 406 depends on BACKLIGHT_CLASS_DEVICE 407 help 408 Say Y here if you want to enable support for the panels built 409 around the Novatek NT36672A display controller, such as some 410 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 411 412config DRM_PANEL_NOVATEK_NT39016 413 tristate "Novatek NT39016 RGB/SPI panel" 414 depends on OF && SPI 415 depends on BACKLIGHT_CLASS_DEVICE 416 select REGMAP_SPI 417 help 418 Say Y here if you want to enable support for the panels built 419 around the Novatek NT39016 display controller. 420 421config DRM_PANEL_MANTIX_MLAF057WE51 422 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 423 depends on OF 424 depends on DRM_MIPI_DSI 425 depends on BACKLIGHT_CLASS_DEVICE 426 help 427 Say Y here if you want to enable support for the Mantix 428 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 429 has a resolution of 720x1440 pixels, a built in backlight and touch 430 controller. 431 432config DRM_PANEL_OLIMEX_LCD_OLINUXINO 433 tristate "Olimex LCD-OLinuXino panel" 434 depends on OF 435 depends on I2C 436 depends on BACKLIGHT_CLASS_DEVICE 437 select CRC32 438 help 439 The panel is used with different sizes LCDs, from 480x272 to 440 1280x800, and 24 bit per pixel. 441 442 Say Y here if you want to enable support for Olimex Ltd. 443 LCD-OLinuXino panel. 444 445config DRM_PANEL_ORISETECH_OTA5601A 446 tristate "Orise Technology ota5601a RGB/SPI panel" 447 depends on SPI 448 depends on BACKLIGHT_CLASS_DEVICE 449 select REGMAP_SPI 450 help 451 Say Y here if you want to enable support for the panels built 452 around the Orise Technology OTA9601A display controller. 453 454config DRM_PANEL_ORISETECH_OTM8009A 455 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 456 depends on OF 457 depends on DRM_MIPI_DSI 458 depends on BACKLIGHT_CLASS_DEVICE 459 help 460 Say Y here if you want to enable support for Orise Technology 461 otm8009a 480x800 dsi 2dl panel. 462 463config DRM_PANEL_OSD_OSD101T2587_53TS 464 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 465 depends on OF 466 depends on DRM_MIPI_DSI 467 depends on BACKLIGHT_CLASS_DEVICE 468 help 469 Say Y here if you want to enable support for One Stop Displays 470 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 471 472config DRM_PANEL_PANASONIC_VVX10F034N00 473 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 474 depends on OF 475 depends on DRM_MIPI_DSI 476 depends on BACKLIGHT_CLASS_DEVICE 477 help 478 Say Y here if you want to enable support for Panasonic VVX10F034N00 479 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 480 Xperia Z2 tablets 481 482config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 483 tristate "Raspberry Pi 7-inch touchscreen panel" 484 depends on DRM_MIPI_DSI 485 help 486 Say Y here if you want to enable support for the Raspberry 487 Pi 7" Touchscreen. To compile this driver as a module, 488 choose M here. 489 490config DRM_PANEL_RAYDIUM_RM67191 491 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 492 depends on OF 493 depends on DRM_MIPI_DSI 494 depends on BACKLIGHT_CLASS_DEVICE 495 help 496 Say Y here if you want to enable support for Raydium RM67191 FHD 497 (1080x1920) DSI panel. 498 499config DRM_PANEL_RAYDIUM_RM68200 500 tristate "Raydium RM68200 720x1280 DSI video mode panel" 501 depends on OF 502 depends on DRM_MIPI_DSI 503 depends on BACKLIGHT_CLASS_DEVICE 504 help 505 Say Y here if you want to enable support for Raydium RM68200 506 720x1280 DSI video mode panel. 507 508config DRM_PANEL_RONBO_RB070D30 509 tristate "Ronbo Electronics RB070D30 panel" 510 depends on OF 511 depends on DRM_MIPI_DSI 512 depends on BACKLIGHT_CLASS_DEVICE 513 help 514 Say Y here if you want to enable support for Ronbo Electronics 515 RB070D30 1024x600 DSI panel. 516 517config DRM_PANEL_SAMSUNG_ATNA33XC20 518 tristate "Samsung ATNA33XC20 eDP panel" 519 depends on OF 520 depends on BACKLIGHT_CLASS_DEVICE 521 depends on PM 522 select DRM_DISPLAY_DP_HELPER 523 select DRM_DISPLAY_HELPER 524 select DRM_DP_AUX_BUS 525 help 526 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 527 be handled by the DRM_PANEL_SIMPLE driver because its power 528 sequencing is non-standard. 529 530config DRM_PANEL_SAMSUNG_DB7430 531 tristate "Samsung DB7430-based DPI panels" 532 depends on OF && SPI && GPIOLIB 533 depends on BACKLIGHT_CLASS_DEVICE 534 select DRM_MIPI_DBI 535 help 536 Say Y here if you want to enable support for the Samsung 537 DB7430 DPI display controller used in such devices as the 538 LMS397KF04 480x800 DPI panel. 539 540config DRM_PANEL_SAMSUNG_S6D16D0 541 tristate "Samsung S6D16D0 DSI video mode panel" 542 depends on OF 543 depends on DRM_MIPI_DSI 544 select VIDEOMODE_HELPERS 545 546config DRM_PANEL_SAMSUNG_S6D27A1 547 tristate "Samsung S6D27A1 DPI panel driver" 548 depends on OF && SPI && GPIOLIB 549 select DRM_MIPI_DBI 550 help 551 Say Y here if you want to enable support for the Samsung 552 S6D27A1 DPI 480x800 panel. 553 554 This panel can be found in Samsung Galaxy Ace 2 555 GT-I8160 mobile phone. 556 557config DRM_PANEL_SAMSUNG_S6D7AA0 558 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 559 depends on OF 560 depends on BACKLIGHT_CLASS_DEVICE 561 select DRM_MIPI_DSI 562 select VIDEOMODE_HELPERS 563 564config DRM_PANEL_SAMSUNG_S6E3HA2 565 tristate "Samsung S6E3HA2 DSI video mode panel" 566 depends on OF 567 depends on DRM_MIPI_DSI 568 depends on BACKLIGHT_CLASS_DEVICE 569 select VIDEOMODE_HELPERS 570 571config DRM_PANEL_SAMSUNG_S6E63J0X03 572 tristate "Samsung S6E63J0X03 DSI command mode panel" 573 depends on OF 574 depends on DRM_MIPI_DSI 575 depends on BACKLIGHT_CLASS_DEVICE 576 select VIDEOMODE_HELPERS 577 578config DRM_PANEL_SAMSUNG_S6E63M0 579 tristate "Samsung S6E63M0 RGB panel" 580 depends on OF 581 depends on BACKLIGHT_CLASS_DEVICE 582 help 583 Say Y here if you want to enable support for Samsung S6E63M0 584 AMOLED LCD panel. This panel can be accessed using SPI or 585 DSI. 586 587config DRM_PANEL_SAMSUNG_S6E63M0_SPI 588 tristate "Samsung S6E63M0 RGB SPI interface" 589 depends on SPI 590 depends on DRM_PANEL_SAMSUNG_S6E63M0 591 default DRM_PANEL_SAMSUNG_S6E63M0 592 select DRM_MIPI_DBI 593 help 594 Say Y here if you want to be able to access the Samsung 595 S6E63M0 panel using SPI. 596 597config DRM_PANEL_SAMSUNG_S6E63M0_DSI 598 tristate "Samsung S6E63M0 RGB DSI interface" 599 depends on DRM_MIPI_DSI 600 depends on DRM_PANEL_SAMSUNG_S6E63M0 601 help 602 Say Y here if you want to be able to access the Samsung 603 S6E63M0 panel using DSI. 604 605config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 606 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 607 depends on OF 608 select DRM_MIPI_DSI 609 select VIDEOMODE_HELPERS 610 611config DRM_PANEL_SAMSUNG_S6E8AA0 612 tristate "Samsung S6E8AA0 DSI video mode panel" 613 depends on OF 614 select DRM_MIPI_DSI 615 select VIDEOMODE_HELPERS 616 617config DRM_PANEL_SAMSUNG_SOFEF00 618 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 619 depends on OF 620 depends on DRM_MIPI_DSI 621 depends on BACKLIGHT_CLASS_DEVICE 622 select VIDEOMODE_HELPERS 623 help 624 Say Y or M here if you want to enable support for the Samsung AMOLED 625 command mode panels found in the OnePlus 6/6T smartphones. 626 627 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 628 629config DRM_PANEL_SEIKO_43WVF1G 630 tristate "Seiko 43WVF1G panel" 631 depends on OF 632 depends on BACKLIGHT_CLASS_DEVICE 633 select VIDEOMODE_HELPERS 634 help 635 Say Y here if you want to enable support for the Seiko 636 43WVF1G controller for 800x480 LCD panels 637 638config DRM_PANEL_SHARP_LQ101R1SX01 639 tristate "Sharp LQ101R1SX01 panel" 640 depends on OF 641 depends on DRM_MIPI_DSI 642 depends on BACKLIGHT_CLASS_DEVICE 643 help 644 Say Y here if you want to enable support for Sharp LQ101R1SX01 645 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 646 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 647 the host and has a built-in LED backlight. 648 649 To compile this driver as a module, choose M here: the module 650 will be called panel-sharp-lq101r1sx01. 651 652config DRM_PANEL_SHARP_LS037V7DW01 653 tristate "Sharp LS037V7DW01 VGA LCD panel" 654 depends on GPIOLIB && OF && REGULATOR 655 help 656 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 657 (480x640) LCD panel (found on the TI SDP3430 board). 658 659config DRM_PANEL_SHARP_LS043T1LE01 660 tristate "Sharp LS043T1LE01 qHD video mode panel" 661 depends on OF 662 depends on DRM_MIPI_DSI 663 depends on BACKLIGHT_CLASS_DEVICE 664 help 665 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 666 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 667 668config DRM_PANEL_SHARP_LS060T1SX01 669 tristate "Sharp LS060T1SX01 FullHD video mode panel" 670 depends on OF 671 depends on DRM_MIPI_DSI 672 depends on BACKLIGHT_CLASS_DEVICE 673 help 674 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 675 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 676 Bundle. 677 678config DRM_PANEL_SITRONIX_ST7701 679 tristate "Sitronix ST7701 panel driver" 680 depends on OF 681 depends on DRM_MIPI_DSI 682 depends on BACKLIGHT_CLASS_DEVICE 683 help 684 Say Y here if you want to enable support for the Sitronix 685 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 686 system interfaces. 687 688config DRM_PANEL_SITRONIX_ST7703 689 tristate "Sitronix ST7703 based MIPI touchscreen panels" 690 depends on OF 691 depends on DRM_MIPI_DSI 692 depends on BACKLIGHT_CLASS_DEVICE 693 help 694 Say Y here if you want to enable support for Sitronix ST7703 based 695 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 696 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 697 in backlight and touch controller. 698 Touch input support is provided by the goodix driver and needs to be 699 selected separately. 700 701config DRM_PANEL_SITRONIX_ST7789V 702 tristate "Sitronix ST7789V panel" 703 depends on OF && SPI 704 depends on BACKLIGHT_CLASS_DEVICE 705 help 706 Say Y here if you want to enable support for the Sitronix 707 ST7789V controller for 240x320 LCD panels 708 709config DRM_PANEL_SONY_ACX565AKM 710 tristate "Sony ACX565AKM panel" 711 depends on GPIOLIB && OF && SPI 712 depends on BACKLIGHT_CLASS_DEVICE 713 help 714 Say Y here if you want to enable support for the Sony ACX565AKM 715 800x600 3.5" panel (found on the Nokia N900). 716 717config DRM_PANEL_SONY_TD4353_JDI 718 tristate "Sony TD4353 JDI panel" 719 depends on GPIOLIB && OF 720 depends on DRM_MIPI_DSI 721 depends on BACKLIGHT_CLASS_DEVICE 722 help 723 Say Y here if you want to enable support for the Sony Tama 724 TD4353 JDI command mode panel as found on some Sony Xperia 725 XZ2 and XZ2 Compact smartphones. 726 727config DRM_PANEL_SONY_TULIP_TRULY_NT35521 728 tristate "Sony Tulip Truly NT35521 panel" 729 depends on GPIOLIB && OF 730 depends on DRM_MIPI_DSI 731 depends on BACKLIGHT_CLASS_DEVICE 732 help 733 Say Y here if you want to enable support for the Sony Tulip 734 NT35521 1280x720 video mode panel as found on Sony Xperia M4 735 Aqua phone. 736 737config DRM_PANEL_STARTEK_KD070FHFID015 738 tristate "STARTEK KD070FHFID015 panel" 739 depends on OF 740 depends on DRM_MIPI_DSI 741 depends on BACKLIGHT_CLASS_DEVICE 742 help 743 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 744 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 745 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 746 the host, a built-in LED backlight and touch controller. 747 748config DRM_PANEL_TDO_TL070WSH30 749 tristate "TDO TL070WSH30 DSI panel" 750 depends on OF 751 depends on DRM_MIPI_DSI 752 depends on BACKLIGHT_CLASS_DEVICE 753 help 754 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 755 panel module. The panel has a 1024×600 resolution and uses 756 24 bit RGB per pixel. It provides a MIPI DSI interface to 757 the host, a built-in LED backlight and touch controller. 758 759config DRM_PANEL_TPO_TD028TTEC1 760 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 761 depends on OF && SPI 762 depends on BACKLIGHT_CLASS_DEVICE 763 help 764 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 765 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 766 767config DRM_PANEL_TPO_TD043MTEA1 768 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 769 depends on GPIOLIB && OF && REGULATOR && SPI 770 help 771 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 772 4.3" panel (found on the OMAP3 Pandora board). 773 774config DRM_PANEL_TPO_TPG110 775 tristate "TPO TPG 800x400 panel" 776 depends on OF && SPI && GPIOLIB 777 depends on BACKLIGHT_CLASS_DEVICE 778 help 779 Say Y here if you want to enable support for TPO TPG110 780 400CH LTPS TFT LCD Single Chip Digital Driver for up to 781 800x400 LCD panels. 782 783config DRM_PANEL_TRULY_NT35597_WQXGA 784 tristate "Truly WQXGA" 785 depends on OF 786 depends on DRM_MIPI_DSI 787 help 788 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 789 Video Mode panel 790 791config DRM_PANEL_VISIONOX_RM69299 792 tristate "Visionox RM69299" 793 depends on OF 794 depends on DRM_MIPI_DSI 795 help 796 Say Y here if you want to enable support for Visionox 797 RM69299 DSI Video Mode panel. 798 799config DRM_PANEL_VISIONOX_VTDR6130 800 tristate "Visionox VTDR6130" 801 depends on OF 802 depends on DRM_MIPI_DSI 803 depends on BACKLIGHT_CLASS_DEVICE 804 help 805 Say Y here if you want to enable support for Visionox 806 VTDR6130 1080x2400 AMOLED DSI panel. 807 808config DRM_PANEL_VISIONOX_R66451 809 tristate "Visionox R66451" 810 depends on OF 811 depends on DRM_MIPI_DSI 812 depends on BACKLIGHT_CLASS_DEVICE 813 select DRM_DISPLAY_DP_HELPER 814 select DRM_DISPLAY_HELPER 815 help 816 Say Y here if you want to enable support for Visionox 817 R66451 1080x2340 AMOLED DSI panel. 818 819config DRM_PANEL_WIDECHIPS_WS2401 820 tristate "Widechips WS2401 DPI panel driver" 821 depends on SPI && GPIOLIB 822 depends on BACKLIGHT_CLASS_DEVICE 823 select DRM_MIPI_DBI 824 help 825 Say Y here if you want to enable support for the Widechips WS2401 DPI 826 480x800 display controller used in panels such as Samsung LMS380KF01. 827 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 828 829config DRM_PANEL_XINPENG_XPP055C272 830 tristate "Xinpeng XPP055C272 panel driver" 831 depends on OF 832 depends on DRM_MIPI_DSI 833 depends on BACKLIGHT_CLASS_DEVICE 834 help 835 Say Y here if you want to enable support for the Xinpeng 836 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 837 system interfaces. 838endmenu 839