xref: /linux/drivers/gpu/drm/tve200/tve200_drm.h (revision 44f57d78)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
4  * Parts of this file were based on sources as follows:
5  *
6  * Copyright (C) 2006-2008 Intel Corporation
7  * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
8  * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
9  * Copyright (C) 2011 Texas Instruments
10  * Copyright (C) 2017 Eric Anholt
11  */
12 
13 #ifndef _TVE200_DRM_H_
14 #define _TVE200_DRM_H_
15 
16 /* Bits 2-31 are valid physical base addresses */
17 #define TVE200_Y_FRAME_BASE_ADDR	0x00
18 #define TVE200_U_FRAME_BASE_ADDR	0x04
19 #define TVE200_V_FRAME_BASE_ADDR	0x08
20 
21 #define TVE200_INT_EN			0x0C
22 #define TVE200_INT_CLR			0x10
23 #define TVE200_INT_STAT			0x14
24 #define TVE200_INT_BUS_ERR		BIT(7)
25 #define TVE200_INT_V_STATUS		BIT(6) /* vertical blank */
26 #define TVE200_INT_V_NEXT_FRAME		BIT(5)
27 #define TVE200_INT_U_NEXT_FRAME		BIT(4)
28 #define TVE200_INT_Y_NEXT_FRAME		BIT(3)
29 #define TVE200_INT_V_FIFO_UNDERRUN	BIT(2)
30 #define TVE200_INT_U_FIFO_UNDERRUN	BIT(1)
31 #define TVE200_INT_Y_FIFO_UNDERRUN	BIT(0)
32 #define TVE200_FIFO_UNDERRUNS		(TVE200_INT_V_FIFO_UNDERRUN | \
33 					 TVE200_INT_U_FIFO_UNDERRUN | \
34 					 TVE200_INT_Y_FIFO_UNDERRUN)
35 
36 #define TVE200_CTRL			0x18
37 #define TVE200_CTRL_YUV420		BIT(31)
38 #define TVE200_CTRL_CSMODE		BIT(30)
39 #define TVE200_CTRL_NONINTERLACE	BIT(28) /* 0 = non-interlace CCIR656 */
40 #define TVE200_CTRL_TVCLKP		BIT(27) /* Inverted clock phase */
41 /* Bits 24..26 define the burst size after arbitration on the bus */
42 #define TVE200_CTRL_BURST_4_WORDS	(0 << 24)
43 #define TVE200_CTRL_BURST_8_WORDS	(1 << 24)
44 #define TVE200_CTRL_BURST_16_WORDS	(2 << 24)
45 #define TVE200_CTRL_BURST_32_WORDS	(3 << 24)
46 #define TVE200_CTRL_BURST_64_WORDS	(4 << 24)
47 #define TVE200_CTRL_BURST_128_WORDS	(5 << 24)
48 #define TVE200_CTRL_BURST_256_WORDS	(6 << 24)
49 #define TVE200_CTRL_BURST_0_WORDS	(7 << 24) /* ? */
50 /*
51  * Bits 16..23 is the retry count*16 before issueing a new AHB transfer
52  * on the AHB bus.
53  */
54 #define TVE200_CTRL_RETRYCNT_MASK	GENMASK(23, 16)
55 #define TVE200_CTRL_RETRYCNT_16		(1 << 16)
56 #define TVE200_CTRL_BBBP		BIT(15) /* 0 = little-endian */
57 /* Bits 12..14 define the YCbCr ordering */
58 #define TVE200_CTRL_YCBCRODR_CB0Y0CR0Y1	(0 << 12)
59 #define TVE200_CTRL_YCBCRODR_Y0CB0Y1CR0	(1 << 12)
60 #define TVE200_CTRL_YCBCRODR_CR0Y0CB0Y1	(2 << 12)
61 #define TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0	(3 << 12)
62 #define TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0	(4 << 12)
63 #define TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0	(5 << 12)
64 #define TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0	(6 << 12)
65 #define TVE200_CTRL_YCBCRODR_Y0CR0Y1CB0	(7 << 12)
66 /* Bits 10..11 define the input resolution (framebuffer size) */
67 #define TVE200_CTRL_IPRESOL_CIF		(0 << 10)
68 #define TVE200_CTRL_IPRESOL_VGA		(1 << 10)
69 #define TVE200_CTRL_IPRESOL_D1		(2 << 10)
70 #define TVE200_CTRL_NTSC		BIT(9) /* 0 = PAL, 1 = NTSC */
71 #define TVE200_CTRL_INTERLACE		BIT(8) /* 1 = interlace, only for D1 */
72 #define TVE200_IPDMOD_RGB555		(0 << 6) /* TVE200_CTRL_YUV420 = 0 */
73 #define TVE200_IPDMOD_RGB565		(1 << 6)
74 #define TVE200_IPDMOD_RGB888		(2 << 6)
75 #define TVE200_IPDMOD_YUV420		(2 << 6) /* TVE200_CTRL_YUV420 = 1 */
76 #define TVE200_IPDMOD_YUV422		(3 << 6)
77 /* Bits 4 & 5 define when to fire the vblank IRQ */
78 #define TVE200_VSTSTYPE_VSYNC		(0 << 4) /* start of vsync */
79 #define TVE200_VSTSTYPE_VBP		(1 << 4) /* start of v back porch */
80 #define TVE200_VSTSTYPE_VAI		(2 << 4) /* start of v active image */
81 #define TVE200_VSTSTYPE_VFP		(3 << 4) /* start of v front porch */
82 #define TVE200_VSTSTYPE_BITS		(BIT(4) | BIT(5))
83 #define TVE200_BGR			BIT(1) /* 0 = RGB, 1 = BGR */
84 #define TVE200_TVEEN			BIT(0) /* Enable TVE block */
85 
86 #define TVE200_CTRL_2			0x1c
87 #define TVE200_CTRL_3			0x20
88 
89 #define TVE200_CTRL_4			0x24
90 #define TVE200_CTRL_4_RESET		BIT(0) /* triggers reset of TVE200 */
91 
92 #include <drm/drm_gem.h>
93 #include <drm/drm_simple_kms_helper.h>
94 
95 struct tve200_drm_dev_private {
96 	struct drm_device *drm;
97 
98 	struct drm_connector *connector;
99 	struct drm_panel *panel;
100 	struct drm_bridge *bridge;
101 	struct drm_simple_display_pipe pipe;
102 
103 	void *regs;
104 	struct clk *pclk;
105 	struct clk *clk;
106 };
107 
108 #define to_tve200_connector(x) \
109 	container_of(x, struct tve200_drm_connector, connector)
110 
111 int tve200_display_init(struct drm_device *dev);
112 irqreturn_t tve200_irq(int irq, void *data);
113 int tve200_connector_init(struct drm_device *dev);
114 int tve200_encoder_init(struct drm_device *dev);
115 int tve200_dumb_create(struct drm_file *file_priv,
116 		      struct drm_device *dev,
117 		      struct drm_mode_create_dumb *args);
118 
119 #endif /* _TVE200_DRM_H_ */
120