xref: /linux/drivers/hid/hid-dr.c (revision 44f57d78)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Force feedback support for DragonRise Inc. game controllers
4  *
5  * From what I have gathered, these devices are mass produced in China and are
6  * distributed under several vendors. They often share the same design as
7  * the original PlayStation DualShock controller.
8  *
9  * 0079:0006 "DragonRise Inc.   Generic   USB  Joystick  "
10  *  - tested with a Tesun USB-703 game controller.
11  *
12  * Copyright (c) 2009 Richard Walmsley <richwalm@gmail.com>
13  */
14 
15 /*
16  */
17 
18 #include <linux/input.h>
19 #include <linux/slab.h>
20 #include <linux/hid.h>
21 #include <linux/module.h>
22 
23 #include "hid-ids.h"
24 
25 #ifdef CONFIG_DRAGONRISE_FF
26 
27 struct drff_device {
28 	struct hid_report *report;
29 };
30 
31 static int drff_play(struct input_dev *dev, void *data,
32 				 struct ff_effect *effect)
33 {
34 	struct hid_device *hid = input_get_drvdata(dev);
35 	struct drff_device *drff = data;
36 	int strong, weak;
37 
38 	strong = effect->u.rumble.strong_magnitude;
39 	weak = effect->u.rumble.weak_magnitude;
40 
41 	dbg_hid("called with 0x%04x 0x%04x", strong, weak);
42 
43 	if (strong || weak) {
44 		strong = strong * 0xff / 0xffff;
45 		weak = weak * 0xff / 0xffff;
46 
47 		/* While reverse engineering this device, I found that when
48 		   this value is set, it causes the strong rumble to function
49 		   at a near maximum speed, so we'll bypass it. */
50 		if (weak == 0x0a)
51 			weak = 0x0b;
52 
53 		drff->report->field[0]->value[0] = 0x51;
54 		drff->report->field[0]->value[1] = 0x00;
55 		drff->report->field[0]->value[2] = weak;
56 		drff->report->field[0]->value[4] = strong;
57 		hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
58 
59 		drff->report->field[0]->value[0] = 0xfa;
60 		drff->report->field[0]->value[1] = 0xfe;
61 	} else {
62 		drff->report->field[0]->value[0] = 0xf3;
63 		drff->report->field[0]->value[1] = 0x00;
64 	}
65 
66 	drff->report->field[0]->value[2] = 0x00;
67 	drff->report->field[0]->value[4] = 0x00;
68 	dbg_hid("running with 0x%02x 0x%02x", strong, weak);
69 	hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
70 
71 	return 0;
72 }
73 
74 static int drff_init(struct hid_device *hid)
75 {
76 	struct drff_device *drff;
77 	struct hid_report *report;
78 	struct hid_input *hidinput = list_first_entry(&hid->inputs,
79 						struct hid_input, list);
80 	struct list_head *report_list =
81 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
82 	struct input_dev *dev = hidinput->input;
83 	int error;
84 
85 	if (list_empty(report_list)) {
86 		hid_err(hid, "no output reports found\n");
87 		return -ENODEV;
88 	}
89 
90 	report = list_first_entry(report_list, struct hid_report, list);
91 	if (report->maxfield < 1) {
92 		hid_err(hid, "no fields in the report\n");
93 		return -ENODEV;
94 	}
95 
96 	if (report->field[0]->report_count < 7) {
97 		hid_err(hid, "not enough values in the field\n");
98 		return -ENODEV;
99 	}
100 
101 	drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL);
102 	if (!drff)
103 		return -ENOMEM;
104 
105 	set_bit(FF_RUMBLE, dev->ffbit);
106 
107 	error = input_ff_create_memless(dev, drff, drff_play);
108 	if (error) {
109 		kfree(drff);
110 		return error;
111 	}
112 
113 	drff->report = report;
114 	drff->report->field[0]->value[0] = 0xf3;
115 	drff->report->field[0]->value[1] = 0x00;
116 	drff->report->field[0]->value[2] = 0x00;
117 	drff->report->field[0]->value[3] = 0x00;
118 	drff->report->field[0]->value[4] = 0x00;
119 	drff->report->field[0]->value[5] = 0x00;
120 	drff->report->field[0]->value[6] = 0x00;
121 	hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
122 
123 	hid_info(hid, "Force Feedback for DragonRise Inc. "
124 		 "game controllers by Richard Walmsley <richwalm@gmail.com>\n");
125 
126 	return 0;
127 }
128 #else
129 static inline int drff_init(struct hid_device *hid)
130 {
131 	return 0;
132 }
133 #endif
134 
135 /*
136  * The original descriptor of joystick with PID 0x0011, represented by DVTech PC
137  * JS19. It seems both copied from another device and a result of confusion
138  * either about the specification or about the program used to create the
139  * descriptor. In any case, it's a wonder it works on Windows.
140  *
141  *  Usage Page (Desktop),             ; Generic desktop controls (01h)
142  *  Usage (Joystick),                 ; Joystick (04h, application collection)
143  *  Collection (Application),
144  *    Collection (Logical),
145  *      Report Size (8),
146  *      Report Count (5),
147  *      Logical Minimum (0),
148  *      Logical Maximum (255),
149  *      Physical Minimum (0),
150  *      Physical Maximum (255),
151  *      Usage (X),                    ; X (30h, dynamic value)
152  *      Usage (X),                    ; X (30h, dynamic value)
153  *      Usage (X),                    ; X (30h, dynamic value)
154  *      Usage (X),                    ; X (30h, dynamic value)
155  *      Usage (Y),                    ; Y (31h, dynamic value)
156  *      Input (Variable),
157  *      Report Size (4),
158  *      Report Count (1),
159  *      Logical Maximum (7),
160  *      Physical Maximum (315),
161  *      Unit (Degrees),
162  *      Usage (00h),
163  *      Input (Variable, Null State),
164  *      Unit,
165  *      Report Size (1),
166  *      Report Count (10),
167  *      Logical Maximum (1),
168  *      Physical Maximum (1),
169  *      Usage Page (Button),          ; Button (09h)
170  *      Usage Minimum (01h),
171  *      Usage Maximum (0Ah),
172  *      Input (Variable),
173  *      Usage Page (FF00h),           ; FF00h, vendor-defined
174  *      Report Size (1),
175  *      Report Count (10),
176  *      Logical Maximum (1),
177  *      Physical Maximum (1),
178  *      Usage (01h),
179  *      Input (Variable),
180  *    End Collection,
181  *    Collection (Logical),
182  *      Report Size (8),
183  *      Report Count (4),
184  *      Physical Maximum (255),
185  *      Logical Maximum (255),
186  *      Usage (02h),
187  *      Output (Variable),
188  *    End Collection,
189  *  End Collection
190  */
191 
192 /* Size of the original descriptor of the PID 0x0011 joystick */
193 #define PID0011_RDESC_ORIG_SIZE	101
194 
195 /* Fixed report descriptor for PID 0x011 joystick */
196 static __u8 pid0011_rdesc_fixed[] = {
197 	0x05, 0x01,         /*  Usage Page (Desktop),           */
198 	0x09, 0x04,         /*  Usage (Joystick),               */
199 	0xA1, 0x01,         /*  Collection (Application),       */
200 	0xA1, 0x02,         /*      Collection (Logical),       */
201 	0x14,               /*          Logical Minimum (0),    */
202 	0x75, 0x08,         /*          Report Size (8),        */
203 	0x95, 0x03,         /*          Report Count (3),       */
204 	0x81, 0x01,         /*          Input (Constant),       */
205 	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
206 	0x95, 0x02,         /*          Report Count (2),       */
207 	0x09, 0x30,         /*          Usage (X),              */
208 	0x09, 0x31,         /*          Usage (Y),              */
209 	0x81, 0x02,         /*          Input (Variable),       */
210 	0x75, 0x01,         /*          Report Size (1),        */
211 	0x95, 0x04,         /*          Report Count (4),       */
212 	0x81, 0x01,         /*          Input (Constant),       */
213 	0x25, 0x01,         /*          Logical Maximum (1),    */
214 	0x95, 0x0A,         /*          Report Count (10),      */
215 	0x05, 0x09,         /*          Usage Page (Button),    */
216 	0x19, 0x01,         /*          Usage Minimum (01h),    */
217 	0x29, 0x0A,         /*          Usage Maximum (0Ah),    */
218 	0x81, 0x02,         /*          Input (Variable),       */
219 	0x95, 0x0A,         /*          Report Count (10),      */
220 	0x81, 0x01,         /*          Input (Constant),       */
221 	0xC0,               /*      End Collection,             */
222 	0xC0                /*  End Collection                  */
223 };
224 
225 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
226 				unsigned int *rsize)
227 {
228 	switch (hdev->product) {
229 	case 0x0011:
230 		if (*rsize == PID0011_RDESC_ORIG_SIZE) {
231 			rdesc = pid0011_rdesc_fixed;
232 			*rsize = sizeof(pid0011_rdesc_fixed);
233 		}
234 		break;
235 	}
236 	return rdesc;
237 }
238 
239 #define map_abs(c)      hid_map_usage(hi, usage, bit, max, EV_ABS, (c))
240 #define map_rel(c)      hid_map_usage(hi, usage, bit, max, EV_REL, (c))
241 
242 static int dr_input_mapping(struct hid_device *hdev, struct hid_input *hi,
243 			    struct hid_field *field, struct hid_usage *usage,
244 			    unsigned long **bit, int *max)
245 {
246 	switch (usage->hid) {
247 	/*
248 	 * revert to the old hid-input behavior where axes
249 	 * can be randomly assigned when hid->usage is reused.
250 	 */
251 	case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
252 	case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
253 		if (field->flags & HID_MAIN_ITEM_RELATIVE)
254 			map_rel(usage->hid & 0xf);
255 		else
256 			map_abs(usage->hid & 0xf);
257 		return 1;
258 	}
259 
260 	return 0;
261 }
262 
263 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
264 {
265 	int ret;
266 
267 	dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe...");
268 
269 	ret = hid_parse(hdev);
270 	if (ret) {
271 		hid_err(hdev, "parse failed\n");
272 		goto err;
273 	}
274 
275 	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
276 	if (ret) {
277 		hid_err(hdev, "hw start failed\n");
278 		goto err;
279 	}
280 
281 	switch (hdev->product) {
282 	case 0x0006:
283 		ret = drff_init(hdev);
284 		if (ret) {
285 			dev_err(&hdev->dev, "force feedback init failed\n");
286 			hid_hw_stop(hdev);
287 			goto err;
288 		}
289 		break;
290 	}
291 
292 	return 0;
293 err:
294 	return ret;
295 }
296 
297 static const struct hid_device_id dr_devices[] = {
298 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006),  },
299 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011),  },
300 	{ }
301 };
302 MODULE_DEVICE_TABLE(hid, dr_devices);
303 
304 static struct hid_driver dr_driver = {
305 	.name = "dragonrise",
306 	.id_table = dr_devices,
307 	.report_fixup = dr_report_fixup,
308 	.probe = dr_probe,
309 	.input_mapping = dr_input_mapping,
310 };
311 module_hid_driver(dr_driver);
312 
313 MODULE_LICENSE("GPL");
314