xref: /linux/drivers/hid/intel-ish-hid/ipc/pci-ish.c (revision 44f57d78)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * PCI glue for ISHTP provider device (ISH) driver
4  *
5  * Copyright (c) 2014-2016, Intel Corporation.
6  */
7 
8 #include <linux/module.h>
9 #include <linux/moduleparam.h>
10 #include <linux/kernel.h>
11 #include <linux/device.h>
12 #include <linux/fs.h>
13 #include <linux/errno.h>
14 #include <linux/types.h>
15 #include <linux/pci.h>
16 #include <linux/sched.h>
17 #include <linux/interrupt.h>
18 #include <linux/workqueue.h>
19 #define CREATE_TRACE_POINTS
20 #include <trace/events/intel_ish.h>
21 #include "ishtp-dev.h"
22 #include "hw-ish.h"
23 
24 static const struct pci_device_id ish_pci_tbl[] = {
25 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CHV_DEVICE_ID)},
26 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Ax_DEVICE_ID)},
27 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Bx_DEVICE_ID)},
28 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, APL_Ax_DEVICE_ID)},
29 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)},
30 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_Ax_DEVICE_ID)},
31 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, GLK_Ax_DEVICE_ID)},
32 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_H_DEVICE_ID)},
33 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, ICL_MOBILE_DEVICE_ID)},
34 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_H_DEVICE_ID)},
35 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CML_LP_DEVICE_ID)},
36 	{0, }
37 };
38 MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
39 
40 /**
41  * ish_event_tracer() - Callback function to dump trace messages
42  * @dev:	ishtp device
43  * @format:	printf style format
44  *
45  * Callback to direct log messages to Linux trace buffers
46  */
47 static __printf(2, 3)
48 void ish_event_tracer(struct ishtp_device *dev, const char *format, ...)
49 {
50 	if (trace_ishtp_dump_enabled()) {
51 		va_list args;
52 		char tmp_buf[100];
53 
54 		va_start(args, format);
55 		vsnprintf(tmp_buf, sizeof(tmp_buf), format, args);
56 		va_end(args);
57 
58 		trace_ishtp_dump(tmp_buf);
59 	}
60 }
61 
62 /**
63  * ish_init() - Init function
64  * @dev:	ishtp device
65  *
66  * This function initialize wait queues for suspend/resume and call
67  * calls hadware initialization function. This will initiate
68  * startup sequence
69  *
70  * Return: 0 for success or error code for failure
71  */
72 static int ish_init(struct ishtp_device *dev)
73 {
74 	int ret;
75 
76 	/* Set the state of ISH HW to start */
77 	ret = ish_hw_start(dev);
78 	if (ret) {
79 		dev_err(dev->devc, "ISH: hw start failed.\n");
80 		return ret;
81 	}
82 
83 	/* Start the inter process communication to ISH processor */
84 	ret = ishtp_start(dev);
85 	if (ret) {
86 		dev_err(dev->devc, "ISHTP: Protocol init failed.\n");
87 		return ret;
88 	}
89 
90 	return 0;
91 }
92 
93 static const struct pci_device_id ish_invalid_pci_ids[] = {
94 	/* Mehlow platform special pci ids */
95 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xA309)},
96 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xA30A)},
97 	{}
98 };
99 
100 /**
101  * ish_probe() - PCI driver probe callback
102  * @pdev:	pci device
103  * @ent:	pci device id
104  *
105  * Initialize PCI function, setup interrupt and call for ISH initialization
106  *
107  * Return: 0 for success or error code for failure
108  */
109 static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
110 {
111 	int ret;
112 	struct ish_hw *hw;
113 	unsigned long irq_flag = 0;
114 	struct ishtp_device *ishtp;
115 	struct device *dev = &pdev->dev;
116 
117 	/* Check for invalid platforms for ISH support */
118 	if (pci_dev_present(ish_invalid_pci_ids))
119 		return -ENODEV;
120 
121 	/* enable pci dev */
122 	ret = pcim_enable_device(pdev);
123 	if (ret) {
124 		dev_err(dev, "ISH: Failed to enable PCI device\n");
125 		return ret;
126 	}
127 
128 	/* set PCI host mastering */
129 	pci_set_master(pdev);
130 
131 	/* pci request regions for ISH driver */
132 	ret = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME);
133 	if (ret) {
134 		dev_err(dev, "ISH: Failed to get PCI regions\n");
135 		return ret;
136 	}
137 
138 	/* allocates and initializes the ISH dev structure */
139 	ishtp = ish_dev_init(pdev);
140 	if (!ishtp) {
141 		ret = -ENOMEM;
142 		return ret;
143 	}
144 	hw = to_ish_hw(ishtp);
145 	ishtp->print_log = ish_event_tracer;
146 
147 	/* mapping IO device memory */
148 	hw->mem_addr = pcim_iomap_table(pdev)[0];
149 	ishtp->pdev = pdev;
150 	pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
151 
152 	/* request and enable interrupt */
153 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
154 	if (!pdev->msi_enabled && !pdev->msix_enabled)
155 		irq_flag = IRQF_SHARED;
156 
157 	ret = devm_request_irq(dev, pdev->irq, ish_irq_handler,
158 			       irq_flag, KBUILD_MODNAME, ishtp);
159 	if (ret) {
160 		dev_err(dev, "ISH: request IRQ %d failed\n", pdev->irq);
161 		return ret;
162 	}
163 
164 	dev_set_drvdata(ishtp->devc, ishtp);
165 
166 	init_waitqueue_head(&ishtp->suspend_wait);
167 	init_waitqueue_head(&ishtp->resume_wait);
168 
169 	ret = ish_init(ishtp);
170 	if (ret)
171 		return ret;
172 
173 	return 0;
174 }
175 
176 /**
177  * ish_remove() - PCI driver remove callback
178  * @pdev:	pci device
179  *
180  * This function does cleanup of ISH on pci remove callback
181  */
182 static void ish_remove(struct pci_dev *pdev)
183 {
184 	struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
185 
186 	ishtp_bus_remove_all_clients(ishtp_dev, false);
187 	ish_device_disable(ishtp_dev);
188 }
189 
190 static struct device __maybe_unused *ish_resume_device;
191 
192 /* 50ms to get resume response */
193 #define WAIT_FOR_RESUME_ACK_MS		50
194 
195 /**
196  * ish_resume_handler() - Work function to complete resume
197  * @work:	work struct
198  *
199  * The resume work function to complete resume function asynchronously.
200  * There are two resume paths, one where ISH is not powered off,
201  * in that case a simple resume message is enough, others we need
202  * a reset sequence.
203  */
204 static void __maybe_unused ish_resume_handler(struct work_struct *work)
205 {
206 	struct pci_dev *pdev = to_pci_dev(ish_resume_device);
207 	struct ishtp_device *dev = pci_get_drvdata(pdev);
208 	uint32_t fwsts;
209 	int ret;
210 
211 	/* Get ISH FW status */
212 	fwsts = IPC_GET_ISH_FWSTS(dev->ops->get_fw_status(dev));
213 
214 	/*
215 	 * If currently, in ISH FW, sensor app is loaded or beyond that,
216 	 * it means ISH isn't powered off, in this case, send a resume message.
217 	 */
218 	if (fwsts >= FWSTS_SENSOR_APP_LOADED) {
219 		ishtp_send_resume(dev);
220 
221 		/* Waiting to get resume response */
222 		if (dev->resume_flag)
223 			ret = wait_event_interruptible_timeout(dev->resume_wait,
224 				!dev->resume_flag,
225 				msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS));
226 	}
227 
228 	/*
229 	 * If in ISH FW, sensor app isn't loaded yet, or no resume response.
230 	 * That means this platform is not S0ix compatible, or something is
231 	 * wrong with ISH FW. So on resume, full reboot of ISH processor will
232 	 * happen, so need to go through init sequence again.
233 	 */
234 	if (dev->resume_flag)
235 		ish_init(dev);
236 }
237 
238 /**
239  * ish_suspend() - ISH suspend callback
240  * @device:	device pointer
241  *
242  * ISH suspend callback
243  *
244  * Return: 0 to the pm core
245  */
246 static int __maybe_unused ish_suspend(struct device *device)
247 {
248 	struct pci_dev *pdev = to_pci_dev(device);
249 	struct ishtp_device *dev = pci_get_drvdata(pdev);
250 
251 	enable_irq_wake(pdev->irq);
252 	/*
253 	 * If previous suspend hasn't been asnwered then ISH is likely dead,
254 	 * don't attempt nested notification
255 	 */
256 	if (dev->suspend_flag)
257 		return	0;
258 
259 	dev->resume_flag = 0;
260 	dev->suspend_flag = 1;
261 	ishtp_send_suspend(dev);
262 
263 	/* 25 ms should be enough for live ISH to flush all IPC buf */
264 	if (dev->suspend_flag)
265 		wait_event_interruptible_timeout(dev->suspend_wait,
266 						 !dev->suspend_flag,
267 						  msecs_to_jiffies(25));
268 
269 	return 0;
270 }
271 
272 static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler);
273 /**
274  * ish_resume() - ISH resume callback
275  * @device:	device pointer
276  *
277  * ISH resume callback
278  *
279  * Return: 0 to the pm core
280  */
281 static int __maybe_unused ish_resume(struct device *device)
282 {
283 	struct pci_dev *pdev = to_pci_dev(device);
284 	struct ishtp_device *dev = pci_get_drvdata(pdev);
285 
286 	ish_resume_device = device;
287 	dev->resume_flag = 1;
288 
289 	disable_irq_wake(pdev->irq);
290 	schedule_work(&resume_work);
291 
292 	return 0;
293 }
294 
295 static SIMPLE_DEV_PM_OPS(ish_pm_ops, ish_suspend, ish_resume);
296 
297 static struct pci_driver ish_driver = {
298 	.name = KBUILD_MODNAME,
299 	.id_table = ish_pci_tbl,
300 	.probe = ish_probe,
301 	.remove = ish_remove,
302 	.driver.pm = &ish_pm_ops,
303 };
304 
305 module_pci_driver(ish_driver);
306 
307 /* Original author */
308 MODULE_AUTHOR("Daniel Drubin <daniel.drubin@intel.com>");
309 /* Adoption to upstream Linux kernel */
310 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
311 
312 MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver");
313 MODULE_LICENSE("GPL");
314