1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * fam15h_power.c - AMD Family 15h processor power monitoring 4 * 5 * Copyright (c) 2011-2016 Advanced Micro Devices, Inc. 6 * Author: Andreas Herrmann <herrmann.der.user@googlemail.com> 7 */ 8 9 #include <linux/err.h> 10 #include <linux/hwmon.h> 11 #include <linux/hwmon-sysfs.h> 12 #include <linux/init.h> 13 #include <linux/module.h> 14 #include <linux/pci.h> 15 #include <linux/bitops.h> 16 #include <linux/cpu.h> 17 #include <linux/cpumask.h> 18 #include <linux/time.h> 19 #include <linux/sched.h> 20 #include <linux/topology.h> 21 #include <asm/processor.h> 22 #include <asm/msr.h> 23 24 MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor"); 25 MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>"); 26 MODULE_LICENSE("GPL"); 27 28 /* D18F3 */ 29 #define REG_NORTHBRIDGE_CAP 0xe8 30 31 /* D18F4 */ 32 #define REG_PROCESSOR_TDP 0x1b8 33 34 /* D18F5 */ 35 #define REG_TDP_RUNNING_AVERAGE 0xe0 36 #define REG_TDP_LIMIT3 0xe8 37 38 #define FAM15H_MIN_NUM_ATTRS 2 39 #define FAM15H_NUM_GROUPS 2 40 #define MAX_CUS 8 41 42 /* set maximum interval as 1 second */ 43 #define MAX_INTERVAL 1000 44 45 #define PCI_DEVICE_ID_AMD_15H_M70H_NB_F4 0x15b4 46 47 struct fam15h_power_data { 48 struct pci_dev *pdev; 49 unsigned int tdp_to_watts; 50 unsigned int base_tdp; 51 unsigned int processor_pwr_watts; 52 unsigned int cpu_pwr_sample_ratio; 53 const struct attribute_group *groups[FAM15H_NUM_GROUPS]; 54 struct attribute_group group; 55 /* maximum accumulated power of a compute unit */ 56 u64 max_cu_acc_power; 57 /* accumulated power of the compute units */ 58 u64 cu_acc_power[MAX_CUS]; 59 /* performance timestamp counter */ 60 u64 cpu_sw_pwr_ptsc[MAX_CUS]; 61 /* online/offline status of current compute unit */ 62 int cu_on[MAX_CUS]; 63 unsigned long power_period; 64 }; 65 66 static bool is_carrizo_or_later(void) 67 { 68 return boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60; 69 } 70 71 static ssize_t power1_input_show(struct device *dev, 72 struct device_attribute *attr, char *buf) 73 { 74 u32 val, tdp_limit, running_avg_range; 75 s32 running_avg_capture; 76 u64 curr_pwr_watts; 77 struct fam15h_power_data *data = dev_get_drvdata(dev); 78 struct pci_dev *f4 = data->pdev; 79 80 pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), 81 REG_TDP_RUNNING_AVERAGE, &val); 82 83 /* 84 * On Carrizo and later platforms, TdpRunAvgAccCap bit field 85 * is extended to 4:31 from 4:25. 86 */ 87 if (is_carrizo_or_later()) { 88 running_avg_capture = val >> 4; 89 running_avg_capture = sign_extend32(running_avg_capture, 27); 90 } else { 91 running_avg_capture = (val >> 4) & 0x3fffff; 92 running_avg_capture = sign_extend32(running_avg_capture, 21); 93 } 94 95 running_avg_range = (val & 0xf) + 1; 96 97 pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), 98 REG_TDP_LIMIT3, &val); 99 100 /* 101 * On Carrizo and later platforms, ApmTdpLimit bit field 102 * is extended to 16:31 from 16:28. 103 */ 104 if (is_carrizo_or_later()) 105 tdp_limit = val >> 16; 106 else 107 tdp_limit = (val >> 16) & 0x1fff; 108 109 curr_pwr_watts = ((u64)(tdp_limit + 110 data->base_tdp)) << running_avg_range; 111 curr_pwr_watts -= running_avg_capture; 112 curr_pwr_watts *= data->tdp_to_watts; 113 114 /* 115 * Convert to microWatt 116 * 117 * power is in Watt provided as fixed point integer with 118 * scaling factor 1/(2^16). For conversion we use 119 * (10^6)/(2^16) = 15625/(2^10) 120 */ 121 curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range); 122 return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts); 123 } 124 static DEVICE_ATTR_RO(power1_input); 125 126 static ssize_t power1_crit_show(struct device *dev, 127 struct device_attribute *attr, char *buf) 128 { 129 struct fam15h_power_data *data = dev_get_drvdata(dev); 130 131 return sprintf(buf, "%u\n", data->processor_pwr_watts); 132 } 133 static DEVICE_ATTR_RO(power1_crit); 134 135 static void do_read_registers_on_cu(void *_data) 136 { 137 struct fam15h_power_data *data = _data; 138 int cu; 139 140 /* 141 * With the new x86 topology modelling, cpu core id actually 142 * is compute unit id. 143 */ 144 cu = topology_core_id(smp_processor_id()); 145 146 rdmsrl_safe(MSR_F15H_CU_PWR_ACCUMULATOR, &data->cu_acc_power[cu]); 147 rdmsrl_safe(MSR_F15H_PTSC, &data->cpu_sw_pwr_ptsc[cu]); 148 149 data->cu_on[cu] = 1; 150 } 151 152 /* 153 * This function is only able to be called when CPUID 154 * Fn8000_0007:EDX[12] is set. 155 */ 156 static int read_registers(struct fam15h_power_data *data) 157 { 158 int core, this_core; 159 cpumask_var_t mask; 160 int ret, cpu; 161 162 ret = zalloc_cpumask_var(&mask, GFP_KERNEL); 163 if (!ret) 164 return -ENOMEM; 165 166 memset(data->cu_on, 0, sizeof(int) * MAX_CUS); 167 168 cpus_read_lock(); 169 170 /* 171 * Choose the first online core of each compute unit, and then 172 * read their MSR value of power and ptsc in a single IPI, 173 * because the MSR value of CPU core represent the compute 174 * unit's. 175 */ 176 core = -1; 177 178 for_each_online_cpu(cpu) { 179 this_core = topology_core_id(cpu); 180 181 if (this_core == core) 182 continue; 183 184 core = this_core; 185 186 /* get any CPU on this compute unit */ 187 cpumask_set_cpu(cpumask_any(topology_sibling_cpumask(cpu)), mask); 188 } 189 190 on_each_cpu_mask(mask, do_read_registers_on_cu, data, true); 191 192 cpus_read_unlock(); 193 free_cpumask_var(mask); 194 195 return 0; 196 } 197 198 static ssize_t power1_average_show(struct device *dev, 199 struct device_attribute *attr, char *buf) 200 { 201 struct fam15h_power_data *data = dev_get_drvdata(dev); 202 u64 prev_cu_acc_power[MAX_CUS], prev_ptsc[MAX_CUS], 203 jdelta[MAX_CUS]; 204 u64 tdelta, avg_acc; 205 int cu, cu_num, ret; 206 signed long leftover; 207 208 /* 209 * With the new x86 topology modelling, x86_max_cores is the 210 * compute unit number. 211 */ 212 cu_num = boot_cpu_data.x86_max_cores; 213 214 ret = read_registers(data); 215 if (ret) 216 return 0; 217 218 for (cu = 0; cu < cu_num; cu++) { 219 prev_cu_acc_power[cu] = data->cu_acc_power[cu]; 220 prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu]; 221 } 222 223 leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period)); 224 if (leftover) 225 return 0; 226 227 ret = read_registers(data); 228 if (ret) 229 return 0; 230 231 for (cu = 0, avg_acc = 0; cu < cu_num; cu++) { 232 /* check if current compute unit is online */ 233 if (data->cu_on[cu] == 0) 234 continue; 235 236 if (data->cu_acc_power[cu] < prev_cu_acc_power[cu]) { 237 jdelta[cu] = data->max_cu_acc_power + data->cu_acc_power[cu]; 238 jdelta[cu] -= prev_cu_acc_power[cu]; 239 } else { 240 jdelta[cu] = data->cu_acc_power[cu] - prev_cu_acc_power[cu]; 241 } 242 tdelta = data->cpu_sw_pwr_ptsc[cu] - prev_ptsc[cu]; 243 jdelta[cu] *= data->cpu_pwr_sample_ratio * 1000; 244 do_div(jdelta[cu], tdelta); 245 246 /* the unit is microWatt */ 247 avg_acc += jdelta[cu]; 248 } 249 250 return sprintf(buf, "%llu\n", (unsigned long long)avg_acc); 251 } 252 static DEVICE_ATTR_RO(power1_average); 253 254 static ssize_t power1_average_interval_show(struct device *dev, 255 struct device_attribute *attr, 256 char *buf) 257 { 258 struct fam15h_power_data *data = dev_get_drvdata(dev); 259 260 return sprintf(buf, "%lu\n", data->power_period); 261 } 262 263 static ssize_t power1_average_interval_store(struct device *dev, 264 struct device_attribute *attr, 265 const char *buf, size_t count) 266 { 267 struct fam15h_power_data *data = dev_get_drvdata(dev); 268 unsigned long temp; 269 int ret; 270 271 ret = kstrtoul(buf, 10, &temp); 272 if (ret) 273 return ret; 274 275 if (temp > MAX_INTERVAL) 276 return -EINVAL; 277 278 /* the interval value should be greater than 0 */ 279 if (temp <= 0) 280 return -EINVAL; 281 282 data->power_period = temp; 283 284 return count; 285 } 286 static DEVICE_ATTR_RW(power1_average_interval); 287 288 static int fam15h_power_init_attrs(struct pci_dev *pdev, 289 struct fam15h_power_data *data) 290 { 291 int n = FAM15H_MIN_NUM_ATTRS; 292 struct attribute **fam15h_power_attrs; 293 struct cpuinfo_x86 *c = &boot_cpu_data; 294 295 if (c->x86 == 0x15 && 296 (c->x86_model <= 0xf || 297 (c->x86_model >= 0x60 && c->x86_model <= 0x7f))) 298 n += 1; 299 300 /* check if processor supports accumulated power */ 301 if (boot_cpu_has(X86_FEATURE_ACC_POWER)) 302 n += 2; 303 304 fam15h_power_attrs = devm_kcalloc(&pdev->dev, n, 305 sizeof(*fam15h_power_attrs), 306 GFP_KERNEL); 307 308 if (!fam15h_power_attrs) 309 return -ENOMEM; 310 311 n = 0; 312 fam15h_power_attrs[n++] = &dev_attr_power1_crit.attr; 313 if (c->x86 == 0x15 && 314 (c->x86_model <= 0xf || 315 (c->x86_model >= 0x60 && c->x86_model <= 0x7f))) 316 fam15h_power_attrs[n++] = &dev_attr_power1_input.attr; 317 318 if (boot_cpu_has(X86_FEATURE_ACC_POWER)) { 319 fam15h_power_attrs[n++] = &dev_attr_power1_average.attr; 320 fam15h_power_attrs[n++] = &dev_attr_power1_average_interval.attr; 321 } 322 323 data->group.attrs = fam15h_power_attrs; 324 325 return 0; 326 } 327 328 static bool should_load_on_this_node(struct pci_dev *f4) 329 { 330 u32 val; 331 332 pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 3), 333 REG_NORTHBRIDGE_CAP, &val); 334 if ((val & BIT(29)) && ((val >> 30) & 3)) 335 return false; 336 337 return true; 338 } 339 340 /* 341 * Newer BKDG versions have an updated recommendation on how to properly 342 * initialize the running average range (was: 0xE, now: 0x9). This avoids 343 * counter saturations resulting in bogus power readings. 344 * We correct this value ourselves to cope with older BIOSes. 345 */ 346 static const struct pci_device_id affected_device[] = { 347 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, 348 { 0 } 349 }; 350 351 static void tweak_runavg_range(struct pci_dev *pdev) 352 { 353 u32 val; 354 355 /* 356 * let this quirk apply only to the current version of the 357 * northbridge, since future versions may change the behavior 358 */ 359 if (!pci_match_id(affected_device, pdev)) 360 return; 361 362 pci_bus_read_config_dword(pdev->bus, 363 PCI_DEVFN(PCI_SLOT(pdev->devfn), 5), 364 REG_TDP_RUNNING_AVERAGE, &val); 365 if ((val & 0xf) != 0xe) 366 return; 367 368 val &= ~0xf; 369 val |= 0x9; 370 pci_bus_write_config_dword(pdev->bus, 371 PCI_DEVFN(PCI_SLOT(pdev->devfn), 5), 372 REG_TDP_RUNNING_AVERAGE, val); 373 } 374 375 #ifdef CONFIG_PM 376 static int fam15h_power_resume(struct pci_dev *pdev) 377 { 378 tweak_runavg_range(pdev); 379 return 0; 380 } 381 #else 382 #define fam15h_power_resume NULL 383 #endif 384 385 static int fam15h_power_init_data(struct pci_dev *f4, 386 struct fam15h_power_data *data) 387 { 388 u32 val; 389 u64 tmp; 390 int ret; 391 392 pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val); 393 data->base_tdp = val >> 16; 394 tmp = val & 0xffff; 395 396 pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), 397 REG_TDP_LIMIT3, &val); 398 399 data->tdp_to_watts = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f); 400 tmp *= data->tdp_to_watts; 401 402 /* result not allowed to be >= 256W */ 403 if ((tmp >> 16) >= 256) 404 dev_warn(&f4->dev, 405 "Bogus value for ProcessorPwrWatts (processor_pwr_watts>=%u)\n", 406 (unsigned int) (tmp >> 16)); 407 408 /* convert to microWatt */ 409 data->processor_pwr_watts = (tmp * 15625) >> 10; 410 411 ret = fam15h_power_init_attrs(f4, data); 412 if (ret) 413 return ret; 414 415 416 /* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */ 417 if (!boot_cpu_has(X86_FEATURE_ACC_POWER)) 418 return 0; 419 420 /* 421 * determine the ratio of the compute unit power accumulator 422 * sample period to the PTSC counter period by executing CPUID 423 * Fn8000_0007:ECX 424 */ 425 data->cpu_pwr_sample_ratio = cpuid_ecx(0x80000007); 426 427 if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &tmp)) { 428 pr_err("Failed to read max compute unit power accumulator MSR\n"); 429 return -ENODEV; 430 } 431 432 data->max_cu_acc_power = tmp; 433 434 /* 435 * Milliseconds are a reasonable interval for the measurement. 436 * But it shouldn't set too long here, because several seconds 437 * would cause the read function to hang. So set default 438 * interval as 10 ms. 439 */ 440 data->power_period = 10; 441 442 return read_registers(data); 443 } 444 445 static int fam15h_power_probe(struct pci_dev *pdev, 446 const struct pci_device_id *id) 447 { 448 struct fam15h_power_data *data; 449 struct device *dev = &pdev->dev; 450 struct device *hwmon_dev; 451 int ret; 452 453 /* 454 * though we ignore every other northbridge, we still have to 455 * do the tweaking on _each_ node in MCM processors as the counters 456 * are working hand-in-hand 457 */ 458 tweak_runavg_range(pdev); 459 460 if (!should_load_on_this_node(pdev)) 461 return -ENODEV; 462 463 data = devm_kzalloc(dev, sizeof(struct fam15h_power_data), GFP_KERNEL); 464 if (!data) 465 return -ENOMEM; 466 467 ret = fam15h_power_init_data(pdev, data); 468 if (ret) 469 return ret; 470 471 data->pdev = pdev; 472 473 data->groups[0] = &data->group; 474 475 hwmon_dev = devm_hwmon_device_register_with_groups(dev, "fam15h_power", 476 data, 477 &data->groups[0]); 478 return PTR_ERR_OR_ZERO(hwmon_dev); 479 } 480 481 static const struct pci_device_id fam15h_power_id_table[] = { 482 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, 483 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) }, 484 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) }, 485 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F4) }, 486 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) }, 487 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) }, 488 {} 489 }; 490 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table); 491 492 static struct pci_driver fam15h_power_driver = { 493 .name = "fam15h_power", 494 .id_table = fam15h_power_id_table, 495 .probe = fam15h_power_probe, 496 .resume = fam15h_power_resume, 497 }; 498 499 module_pci_driver(fam15h_power_driver); 500