1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * This is a combined i2c adapter and algorithm driver for the 4 * MPC107/Tsi107 PowerPC northbridge and processors that include 5 * the same I2C unit (8240, 8245, 85xx). 6 * 7 * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk 8 * Copyright (C) 2021 Allied Telesis Labs 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/sched/signal.h> 14 #include <linux/of_address.h> 15 #include <linux/of_irq.h> 16 #include <linux/of_platform.h> 17 #include <linux/property.h> 18 #include <linux/slab.h> 19 20 #include <linux/clk.h> 21 #include <linux/io.h> 22 #include <linux/iopoll.h> 23 #include <linux/fsl_devices.h> 24 #include <linux/i2c.h> 25 #include <linux/interrupt.h> 26 #include <linux/delay.h> 27 28 #include <asm/mpc52xx.h> 29 #include <asm/mpc85xx.h> 30 #include <sysdev/fsl_soc.h> 31 32 #define DRV_NAME "mpc-i2c" 33 34 #define MPC_I2C_CLOCK_LEGACY 0 35 #define MPC_I2C_CLOCK_PRESERVE (~0U) 36 37 #define MPC_I2C_FDR 0x04 38 #define MPC_I2C_CR 0x08 39 #define MPC_I2C_SR 0x0c 40 #define MPC_I2C_DR 0x10 41 #define MPC_I2C_DFSRR 0x14 42 43 #define CCR_MEN 0x80 44 #define CCR_MIEN 0x40 45 #define CCR_MSTA 0x20 46 #define CCR_MTX 0x10 47 #define CCR_TXAK 0x08 48 #define CCR_RSTA 0x04 49 #define CCR_RSVD 0x02 50 51 #define CSR_MCF 0x80 52 #define CSR_MAAS 0x40 53 #define CSR_MBB 0x20 54 #define CSR_MAL 0x10 55 #define CSR_SRW 0x04 56 #define CSR_MIF 0x02 57 #define CSR_RXAK 0x01 58 59 enum mpc_i2c_action { 60 MPC_I2C_ACTION_START = 1, 61 MPC_I2C_ACTION_RESTART, 62 MPC_I2C_ACTION_READ_BEGIN, 63 MPC_I2C_ACTION_READ_BYTE, 64 MPC_I2C_ACTION_WRITE, 65 MPC_I2C_ACTION_STOP, 66 67 __MPC_I2C_ACTION_CNT 68 }; 69 70 static const char * const action_str[] = { 71 "invalid", 72 "start", 73 "restart", 74 "read begin", 75 "read", 76 "write", 77 "stop", 78 }; 79 80 static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT); 81 82 struct mpc_i2c { 83 struct device *dev; 84 void __iomem *base; 85 u32 interrupt; 86 wait_queue_head_t waitq; 87 spinlock_t lock; 88 struct i2c_adapter adap; 89 int irq; 90 u32 real_clk; 91 u8 fdr, dfsrr; 92 struct clk *clk_per; 93 u32 cntl_bits; 94 enum mpc_i2c_action action; 95 struct i2c_msg *msgs; 96 int num_msgs; 97 int curr_msg; 98 u32 byte_posn; 99 u32 block; 100 int rc; 101 int expect_rxack; 102 bool has_errata_A004447; 103 }; 104 105 struct mpc_i2c_divider { 106 u16 divider; 107 u16 fdr; /* including dfsrr */ 108 }; 109 110 struct mpc_i2c_data { 111 void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock); 112 }; 113 114 static inline void writeccr(struct mpc_i2c *i2c, u32 x) 115 { 116 writeb(x, i2c->base + MPC_I2C_CR); 117 } 118 119 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release 120 * the bus, because it wants to send ACK. 121 * Following sequence of enabling/disabling and sending start/stop generates 122 * the 9 pulses, each with a START then ending with STOP, so it's all OK. 123 */ 124 static void mpc_i2c_fixup(struct mpc_i2c *i2c) 125 { 126 int k; 127 unsigned long flags; 128 129 for (k = 9; k; k--) { 130 writeccr(i2c, 0); 131 writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */ 132 writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */ 133 readb(i2c->base + MPC_I2C_DR); /* init xfer */ 134 udelay(15); /* let it hit the bus */ 135 local_irq_save(flags); /* should not be delayed further */ 136 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */ 137 readb(i2c->base + MPC_I2C_DR); 138 if (k != 1) 139 udelay(5); 140 local_irq_restore(flags); 141 } 142 writeccr(i2c, CCR_MEN); /* Initiate STOP */ 143 readb(i2c->base + MPC_I2C_DR); 144 udelay(15); /* Let STOP propagate */ 145 writeccr(i2c, 0); 146 } 147 148 static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) 149 { 150 void __iomem *addr = i2c->base + MPC_I2C_SR; 151 u8 val; 152 153 return readb_poll_timeout(addr, val, val & mask, 0, 100); 154 } 155 156 /* 157 * Workaround for Erratum A004447. From the P2040CE Rev Q 158 * 159 * 1. Set up the frequency divider and sampling rate. 160 * 2. I2CCR - a0h 161 * 3. Poll for I2CSR[MBB] to get set. 162 * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to 163 * step 5. If MAL is not set, then go to step 13. 164 * 5. I2CCR - 00h 165 * 6. I2CCR - 22h 166 * 7. I2CCR - a2h 167 * 8. Poll for I2CSR[MBB] to get set. 168 * 9. Issue read to I2CDR. 169 * 10. Poll for I2CSR[MIF] to be set. 170 * 11. I2CCR - 82h 171 * 12. Workaround complete. Skip the next steps. 172 * 13. Issue read to I2CDR. 173 * 14. Poll for I2CSR[MIF] to be set. 174 * 15. I2CCR - 80h 175 */ 176 static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) 177 { 178 int ret; 179 u32 val; 180 181 writeccr(i2c, CCR_MEN | CCR_MSTA); 182 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 183 if (ret) { 184 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 185 return; 186 } 187 188 val = readb(i2c->base + MPC_I2C_SR); 189 190 if (val & CSR_MAL) { 191 writeccr(i2c, 0x00); 192 writeccr(i2c, CCR_MSTA | CCR_RSVD); 193 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); 194 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 195 if (ret) { 196 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 197 return; 198 } 199 val = readb(i2c->base + MPC_I2C_DR); 200 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 201 if (ret) { 202 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 203 return; 204 } 205 writeccr(i2c, CCR_MEN | CCR_RSVD); 206 } else { 207 val = readb(i2c->base + MPC_I2C_DR); 208 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 209 if (ret) { 210 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 211 return; 212 } 213 writeccr(i2c, CCR_MEN); 214 } 215 } 216 217 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) 218 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { 219 {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, 220 {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, 221 {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, 222 {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, 223 {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, 224 {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, 225 {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, 226 {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, 227 {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, 228 {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, 229 {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, 230 {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, 231 {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, 232 {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, 233 {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, 234 {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, 235 {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, 236 {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} 237 }; 238 239 static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, 240 u32 *real_clk) 241 { 242 struct fwnode_handle *fwnode = of_fwnode_handle(node); 243 const struct mpc_i2c_divider *div = NULL; 244 unsigned int pvr = mfspr(SPRN_PVR); 245 u32 divider; 246 int i; 247 248 if (clock == MPC_I2C_CLOCK_LEGACY) { 249 /* see below - default fdr = 0x3f -> div = 2048 */ 250 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / 2048; 251 return -EINVAL; 252 } 253 254 /* Determine divider value */ 255 divider = mpc5xxx_fwnode_get_bus_frequency(fwnode) / clock; 256 257 /* 258 * We want to choose an FDR/DFSR that generates an I2C bus speed that 259 * is equal to or lower than the requested speed. 260 */ 261 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { 262 div = &mpc_i2c_dividers_52xx[i]; 263 /* Old MPC5200 rev A CPUs do not support the high bits */ 264 if (div->fdr & 0xc0 && pvr == 0x80822011) 265 continue; 266 if (div->divider >= divider) 267 break; 268 } 269 270 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / div->divider; 271 return (int)div->fdr; 272 } 273 274 static void mpc_i2c_setup_52xx(struct device_node *node, 275 struct mpc_i2c *i2c, 276 u32 clock) 277 { 278 int ret, fdr; 279 280 if (clock == MPC_I2C_CLOCK_PRESERVE) { 281 dev_dbg(i2c->dev, "using fdr %d\n", 282 readb(i2c->base + MPC_I2C_FDR)); 283 return; 284 } 285 286 ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk); 287 fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ 288 289 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 290 291 if (ret >= 0) 292 dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, 293 fdr); 294 } 295 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ 296 static void mpc_i2c_setup_52xx(struct device_node *node, 297 struct mpc_i2c *i2c, 298 u32 clock) 299 { 300 } 301 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ 302 303 #ifdef CONFIG_PPC_MPC512x 304 static void mpc_i2c_setup_512x(struct device_node *node, 305 struct mpc_i2c *i2c, 306 u32 clock) 307 { 308 struct device_node *node_ctrl; 309 void __iomem *ctrl; 310 const u32 *pval; 311 u32 idx; 312 313 /* Enable I2C interrupts for mpc5121 */ 314 node_ctrl = of_find_compatible_node(NULL, NULL, 315 "fsl,mpc5121-i2c-ctrl"); 316 if (node_ctrl) { 317 ctrl = of_iomap(node_ctrl, 0); 318 if (ctrl) { 319 /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ 320 pval = of_get_property(node, "reg", NULL); 321 idx = (*pval & 0xff) / 0x20; 322 setbits32(ctrl, 1 << (24 + idx * 2)); 323 iounmap(ctrl); 324 } 325 of_node_put(node_ctrl); 326 } 327 328 /* The clock setup for the 52xx works also fine for the 512x */ 329 mpc_i2c_setup_52xx(node, i2c, clock); 330 } 331 #else /* CONFIG_PPC_MPC512x */ 332 static void mpc_i2c_setup_512x(struct device_node *node, 333 struct mpc_i2c *i2c, 334 u32 clock) 335 { 336 } 337 #endif /* CONFIG_PPC_MPC512x */ 338 339 #ifdef CONFIG_FSL_SOC 340 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { 341 {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, 342 {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, 343 {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, 344 {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, 345 {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, 346 {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, 347 {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, 348 {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, 349 {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, 350 {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, 351 {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, 352 {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, 353 {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, 354 {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, 355 {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, 356 {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, 357 {49152, 0x011e}, {61440, 0x011f} 358 }; 359 360 static u32 mpc_i2c_get_sec_cfg_8xxx(void) 361 { 362 struct device_node *node; 363 u32 __iomem *reg; 364 u32 val = 0; 365 366 node = of_find_node_by_name(NULL, "global-utilities"); 367 if (node) { 368 const u32 *prop = of_get_property(node, "reg", NULL); 369 if (prop) { 370 /* 371 * Map and check POR Device Status Register 2 372 * (PORDEVSR2) at 0xE0014. Note than while MPC8533 373 * and MPC8544 indicate SEC frequency ratio 374 * configuration as bit 26 in PORDEVSR2, other MPC8xxx 375 * parts may store it differently or may not have it 376 * at all. 377 */ 378 reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); 379 if (!reg) 380 printk(KERN_ERR 381 "Error: couldn't map PORDEVSR2\n"); 382 else 383 val = in_be32(reg) & 0x00000020; /* sec-cfg */ 384 iounmap(reg); 385 } 386 } 387 of_node_put(node); 388 389 return val; 390 } 391 392 static u32 mpc_i2c_get_prescaler_8xxx(void) 393 { 394 /* 395 * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx 396 * may have prescaler 1, 2, or 3, depending on the power-on 397 * configuration. 398 */ 399 u32 prescaler = 1; 400 401 /* mpc85xx */ 402 if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2) 403 || pvr_version_is(PVR_VER_E500MC) 404 || pvr_version_is(PVR_VER_E5500) 405 || pvr_version_is(PVR_VER_E6500)) { 406 unsigned int svr = mfspr(SPRN_SVR); 407 408 if ((SVR_SOC_VER(svr) == SVR_8540) 409 || (SVR_SOC_VER(svr) == SVR_8541) 410 || (SVR_SOC_VER(svr) == SVR_8560) 411 || (SVR_SOC_VER(svr) == SVR_8555) 412 || (SVR_SOC_VER(svr) == SVR_8610)) 413 /* the above 85xx SoCs have prescaler 1 */ 414 prescaler = 1; 415 else if ((SVR_SOC_VER(svr) == SVR_8533) 416 || (SVR_SOC_VER(svr) == SVR_8544)) 417 /* the above 85xx SoCs have prescaler 3 or 2 */ 418 prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; 419 else 420 /* all the other 85xx have prescaler 2 */ 421 prescaler = 2; 422 } 423 424 return prescaler; 425 } 426 427 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, 428 u32 *real_clk) 429 { 430 const struct mpc_i2c_divider *div = NULL; 431 u32 prescaler = mpc_i2c_get_prescaler_8xxx(); 432 u32 divider; 433 int i; 434 435 if (clock == MPC_I2C_CLOCK_LEGACY) { 436 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ 437 *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); 438 return -EINVAL; 439 } 440 441 divider = fsl_get_sys_freq() / clock / prescaler; 442 443 pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", 444 fsl_get_sys_freq(), clock, divider); 445 446 /* 447 * We want to choose an FDR/DFSR that generates an I2C bus speed that 448 * is equal to or lower than the requested speed. 449 */ 450 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { 451 div = &mpc_i2c_dividers_8xxx[i]; 452 if (div->divider >= divider) 453 break; 454 } 455 456 *real_clk = fsl_get_sys_freq() / prescaler / div->divider; 457 return (int)div->fdr; 458 } 459 460 static void mpc_i2c_setup_8xxx(struct device_node *node, 461 struct mpc_i2c *i2c, 462 u32 clock) 463 { 464 int ret, fdr; 465 466 if (clock == MPC_I2C_CLOCK_PRESERVE) { 467 dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", 468 readb(i2c->base + MPC_I2C_DFSRR), 469 readb(i2c->base + MPC_I2C_FDR)); 470 return; 471 } 472 473 ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk); 474 fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ 475 476 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 477 writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); 478 479 if (ret >= 0) 480 dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", 481 i2c->real_clk, fdr >> 8, fdr & 0xff); 482 } 483 484 #else /* !CONFIG_FSL_SOC */ 485 static void mpc_i2c_setup_8xxx(struct device_node *node, 486 struct mpc_i2c *i2c, 487 u32 clock) 488 { 489 } 490 #endif /* CONFIG_FSL_SOC */ 491 492 static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc) 493 { 494 i2c->rc = rc; 495 i2c->block = 0; 496 i2c->cntl_bits = CCR_MEN; 497 writeccr(i2c, i2c->cntl_bits); 498 wake_up(&i2c->waitq); 499 } 500 501 static void mpc_i2c_do_action(struct mpc_i2c *i2c) 502 { 503 struct i2c_msg *msg = NULL; 504 int dir = 0; 505 int recv_len = 0; 506 u8 byte; 507 508 dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]); 509 510 i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK); 511 512 if (i2c->action != MPC_I2C_ACTION_STOP) { 513 msg = &i2c->msgs[i2c->curr_msg]; 514 if (msg->flags & I2C_M_RD) 515 dir = 1; 516 if (msg->flags & I2C_M_RECV_LEN) 517 recv_len = 1; 518 } 519 520 switch (i2c->action) { 521 case MPC_I2C_ACTION_RESTART: 522 i2c->cntl_bits |= CCR_RSTA; 523 fallthrough; 524 525 case MPC_I2C_ACTION_START: 526 i2c->cntl_bits |= CCR_MSTA | CCR_MTX; 527 writeccr(i2c, i2c->cntl_bits); 528 writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR); 529 i2c->expect_rxack = 1; 530 i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE; 531 break; 532 533 case MPC_I2C_ACTION_READ_BEGIN: 534 if (msg->len) { 535 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 536 i2c->cntl_bits |= CCR_TXAK; 537 538 writeccr(i2c, i2c->cntl_bits); 539 /* Dummy read */ 540 readb(i2c->base + MPC_I2C_DR); 541 } 542 i2c->action = MPC_I2C_ACTION_READ_BYTE; 543 break; 544 545 case MPC_I2C_ACTION_READ_BYTE: 546 if (i2c->byte_posn || !recv_len) { 547 /* Generate Tx ACK on next to last byte */ 548 if (i2c->byte_posn == msg->len - 2) 549 i2c->cntl_bits |= CCR_TXAK; 550 /* Do not generate stop on last byte */ 551 if (i2c->byte_posn == msg->len - 1) 552 i2c->cntl_bits |= CCR_MTX; 553 554 writeccr(i2c, i2c->cntl_bits); 555 } 556 557 byte = readb(i2c->base + MPC_I2C_DR); 558 559 if (i2c->byte_posn == 0 && recv_len) { 560 if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) { 561 mpc_i2c_finish(i2c, -EPROTO); 562 return; 563 } 564 msg->len += byte; 565 /* 566 * For block reads, generate Tx ACK here if data length 567 * is 1 byte (total length is 2 bytes). 568 */ 569 if (msg->len == 2) { 570 i2c->cntl_bits |= CCR_TXAK; 571 writeccr(i2c, i2c->cntl_bits); 572 } 573 } 574 575 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte); 576 msg->buf[i2c->byte_posn++] = byte; 577 break; 578 579 case MPC_I2C_ACTION_WRITE: 580 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], 581 msg->buf[i2c->byte_posn]); 582 writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR); 583 i2c->expect_rxack = 1; 584 break; 585 586 case MPC_I2C_ACTION_STOP: 587 mpc_i2c_finish(i2c, 0); 588 break; 589 590 default: 591 WARN(1, "Unexpected action %d\n", i2c->action); 592 break; 593 } 594 595 if (msg && msg->len == i2c->byte_posn) { 596 i2c->curr_msg++; 597 i2c->byte_posn = 0; 598 599 if (i2c->curr_msg == i2c->num_msgs) { 600 i2c->action = MPC_I2C_ACTION_STOP; 601 /* 602 * We don't get another interrupt on read so 603 * finish the transfer now 604 */ 605 if (dir) 606 mpc_i2c_finish(i2c, 0); 607 } else { 608 i2c->action = MPC_I2C_ACTION_RESTART; 609 } 610 } 611 } 612 613 static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status) 614 { 615 spin_lock(&i2c->lock); 616 617 if (!(status & CSR_MCF)) { 618 dev_dbg(i2c->dev, "unfinished\n"); 619 mpc_i2c_finish(i2c, -EIO); 620 goto out; 621 } 622 623 if (status & CSR_MAL) { 624 dev_dbg(i2c->dev, "arbitration lost\n"); 625 mpc_i2c_finish(i2c, -EAGAIN); 626 goto out; 627 } 628 629 if (i2c->expect_rxack && (status & CSR_RXAK)) { 630 dev_dbg(i2c->dev, "no Rx ACK\n"); 631 mpc_i2c_finish(i2c, -ENXIO); 632 goto out; 633 } 634 i2c->expect_rxack = 0; 635 636 mpc_i2c_do_action(i2c); 637 638 out: 639 spin_unlock(&i2c->lock); 640 } 641 642 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) 643 { 644 struct mpc_i2c *i2c = dev_id; 645 u8 status; 646 647 status = readb(i2c->base + MPC_I2C_SR); 648 if (status & CSR_MIF) { 649 /* Wait up to 100us for transfer to properly complete */ 650 readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100); 651 writeb(0, i2c->base + MPC_I2C_SR); 652 mpc_i2c_do_intr(i2c, status); 653 return IRQ_HANDLED; 654 } 655 return IRQ_NONE; 656 } 657 658 static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c) 659 { 660 long time_left; 661 662 time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout); 663 if (!time_left) 664 return -ETIMEDOUT; 665 if (time_left < 0) 666 return time_left; 667 668 return 0; 669 } 670 671 static int mpc_i2c_execute_msg(struct mpc_i2c *i2c) 672 { 673 unsigned long orig_jiffies; 674 unsigned long flags; 675 int ret; 676 677 spin_lock_irqsave(&i2c->lock, flags); 678 679 i2c->curr_msg = 0; 680 i2c->rc = 0; 681 i2c->byte_posn = 0; 682 i2c->block = 1; 683 i2c->action = MPC_I2C_ACTION_START; 684 685 i2c->cntl_bits = CCR_MEN | CCR_MIEN; 686 writeb(0, i2c->base + MPC_I2C_SR); 687 writeccr(i2c, i2c->cntl_bits); 688 689 mpc_i2c_do_action(i2c); 690 691 spin_unlock_irqrestore(&i2c->lock, flags); 692 693 ret = mpc_i2c_wait_for_completion(i2c); 694 if (ret) 695 i2c->rc = ret; 696 697 if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT) 698 i2c_recover_bus(&i2c->adap); 699 700 orig_jiffies = jiffies; 701 /* Wait until STOP is seen, allow up to 1 s */ 702 while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { 703 if (time_after(jiffies, orig_jiffies + HZ)) { 704 u8 status = readb(i2c->base + MPC_I2C_SR); 705 706 dev_dbg(i2c->dev, "timeout\n"); 707 if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { 708 writeb(status & ~CSR_MAL, 709 i2c->base + MPC_I2C_SR); 710 i2c_recover_bus(&i2c->adap); 711 } 712 return -EIO; 713 } 714 cond_resched(); 715 } 716 717 return i2c->rc; 718 } 719 720 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 721 { 722 int rc, ret = num; 723 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 724 int i; 725 726 dev_dbg(i2c->dev, "num = %d\n", num); 727 for (i = 0; i < num; i++) 728 dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n", 729 msgs[i].addr, msgs[i].flags, msgs[i].len, 730 msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len, 731 msgs[i].buf); 732 733 WARN_ON(i2c->msgs != NULL); 734 i2c->msgs = msgs; 735 i2c->num_msgs = num; 736 737 rc = mpc_i2c_execute_msg(i2c); 738 if (rc < 0) 739 ret = rc; 740 741 i2c->num_msgs = 0; 742 i2c->msgs = NULL; 743 744 return ret; 745 } 746 747 static u32 mpc_functionality(struct i2c_adapter *adap) 748 { 749 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL 750 | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; 751 } 752 753 static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) 754 { 755 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 756 757 if (i2c->has_errata_A004447) 758 mpc_i2c_fixup_A004447(i2c); 759 else 760 mpc_i2c_fixup(i2c); 761 762 return 0; 763 } 764 765 static const struct i2c_algorithm mpc_algo = { 766 .master_xfer = mpc_xfer, 767 .functionality = mpc_functionality, 768 }; 769 770 static struct i2c_adapter mpc_ops = { 771 .owner = THIS_MODULE, 772 .algo = &mpc_algo, 773 }; 774 775 static struct i2c_bus_recovery_info fsl_i2c_recovery_info = { 776 .recover_bus = fsl_i2c_bus_recovery, 777 }; 778 779 static int fsl_i2c_probe(struct platform_device *op) 780 { 781 const struct mpc_i2c_data *data; 782 struct mpc_i2c *i2c; 783 struct clk *clk; 784 int result; 785 u32 clock; 786 int err; 787 788 i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL); 789 if (!i2c) 790 return -ENOMEM; 791 792 i2c->dev = &op->dev; /* for debug and error output */ 793 794 init_waitqueue_head(&i2c->waitq); 795 spin_lock_init(&i2c->lock); 796 797 i2c->base = devm_platform_ioremap_resource(op, 0); 798 if (IS_ERR(i2c->base)) 799 return PTR_ERR(i2c->base); 800 801 i2c->irq = platform_get_irq(op, 0); 802 if (i2c->irq < 0) 803 return i2c->irq; 804 805 result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr, 806 IRQF_SHARED, "i2c-mpc", i2c); 807 if (result < 0) { 808 dev_err(i2c->dev, "failed to attach interrupt\n"); 809 return result; 810 } 811 812 /* 813 * enable clock for the I2C peripheral (non fatal), 814 * keep a reference upon successful allocation 815 */ 816 clk = devm_clk_get_optional(&op->dev, NULL); 817 if (IS_ERR(clk)) 818 return PTR_ERR(clk); 819 820 err = clk_prepare_enable(clk); 821 if (err) { 822 dev_err(&op->dev, "failed to enable clock\n"); 823 return err; 824 } 825 826 i2c->clk_per = clk; 827 828 if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { 829 clock = MPC_I2C_CLOCK_PRESERVE; 830 } else { 831 result = of_property_read_u32(op->dev.of_node, 832 "clock-frequency", &clock); 833 if (result) 834 clock = MPC_I2C_CLOCK_LEGACY; 835 } 836 837 data = device_get_match_data(&op->dev); 838 if (data) { 839 data->setup(op->dev.of_node, i2c, clock); 840 } else { 841 /* Backwards compatibility */ 842 if (of_property_read_bool(op->dev.of_node, "dfsrr")) 843 mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock); 844 } 845 846 /* 847 * "fsl,timeout" has been marked as deprecated and, to maintain 848 * backward compatibility, we will only look for it if 849 * "i2c-scl-clk-low-timeout-us" is not present. 850 */ 851 result = of_property_read_u32(op->dev.of_node, 852 "i2c-scl-clk-low-timeout-us", 853 &mpc_ops.timeout); 854 if (result == -EINVAL) 855 result = of_property_read_u32(op->dev.of_node, 856 "fsl,timeout", &mpc_ops.timeout); 857 858 if (!result) { 859 mpc_ops.timeout *= HZ / 1000000; 860 if (mpc_ops.timeout < 5) 861 mpc_ops.timeout = 5; 862 } else { 863 mpc_ops.timeout = HZ; 864 } 865 866 dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); 867 868 if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) 869 i2c->has_errata_A004447 = true; 870 871 i2c->adap = mpc_ops; 872 scnprintf(i2c->adap.name, sizeof(i2c->adap.name), 873 "MPC adapter (%s)", of_node_full_name(op->dev.of_node)); 874 i2c->adap.dev.parent = &op->dev; 875 i2c->adap.nr = op->id; 876 i2c->adap.dev.of_node = of_node_get(op->dev.of_node); 877 i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info; 878 platform_set_drvdata(op, i2c); 879 i2c_set_adapdata(&i2c->adap, i2c); 880 881 result = i2c_add_numbered_adapter(&i2c->adap); 882 if (result) 883 goto fail_add; 884 885 return 0; 886 887 fail_add: 888 clk_disable_unprepare(i2c->clk_per); 889 890 return result; 891 }; 892 893 static int fsl_i2c_remove(struct platform_device *op) 894 { 895 struct mpc_i2c *i2c = platform_get_drvdata(op); 896 897 i2c_del_adapter(&i2c->adap); 898 899 clk_disable_unprepare(i2c->clk_per); 900 901 return 0; 902 }; 903 904 static int __maybe_unused mpc_i2c_suspend(struct device *dev) 905 { 906 struct mpc_i2c *i2c = dev_get_drvdata(dev); 907 908 i2c->fdr = readb(i2c->base + MPC_I2C_FDR); 909 i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); 910 911 return 0; 912 } 913 914 static int __maybe_unused mpc_i2c_resume(struct device *dev) 915 { 916 struct mpc_i2c *i2c = dev_get_drvdata(dev); 917 918 writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); 919 writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); 920 921 return 0; 922 } 923 static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); 924 925 static const struct mpc_i2c_data mpc_i2c_data_512x = { 926 .setup = mpc_i2c_setup_512x, 927 }; 928 929 static const struct mpc_i2c_data mpc_i2c_data_52xx = { 930 .setup = mpc_i2c_setup_52xx, 931 }; 932 933 static const struct mpc_i2c_data mpc_i2c_data_8313 = { 934 .setup = mpc_i2c_setup_8xxx, 935 }; 936 937 static const struct mpc_i2c_data mpc_i2c_data_8543 = { 938 .setup = mpc_i2c_setup_8xxx, 939 }; 940 941 static const struct mpc_i2c_data mpc_i2c_data_8544 = { 942 .setup = mpc_i2c_setup_8xxx, 943 }; 944 945 static const struct of_device_id mpc_i2c_of_match[] = { 946 {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 947 {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, 948 {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 949 {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, 950 {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, 951 {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, 952 {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, 953 /* Backward compatibility */ 954 {.compatible = "fsl-i2c", }, 955 {}, 956 }; 957 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); 958 959 /* Structure for a device driver */ 960 static struct platform_driver mpc_i2c_driver = { 961 .probe = fsl_i2c_probe, 962 .remove = fsl_i2c_remove, 963 .driver = { 964 .name = DRV_NAME, 965 .of_match_table = mpc_i2c_of_match, 966 .pm = &mpc_i2c_pm_ops, 967 }, 968 }; 969 970 module_platform_driver(mpc_i2c_driver); 971 972 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); 973 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " 974 "MPC824x/83xx/85xx/86xx/512x/52xx processors"); 975 MODULE_LICENSE("GPL"); 976