xref: /linux/drivers/i2c/busses/i2c-pxa.c (revision 84b9b44b)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  i2c_adap_pxa.c
4  *
5  *  I2C adapter for the PXA I2C bus access.
6  *
7  *  Copyright (C) 2002 Intrinsyc Software Inc.
8  *  Copyright (C) 2004-2005 Deep Blue Solutions Ltd.
9  *
10  *  History:
11  *    Apr 2002: Initial version [CS]
12  *    Jun 2002: Properly separated algo/adap [FB]
13  *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
14  *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
15  *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
16  *    Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
17  *    Feb 2005: Rework slave mode handling [RMK]
18  */
19 #include <linux/clk.h>
20 #include <linux/delay.h>
21 #include <linux/err.h>
22 #include <linux/errno.h>
23 #include <linux/gpio/consumer.h>
24 #include <linux/i2c.h>
25 #include <linux/init.h>
26 #include <linux/interrupt.h>
27 #include <linux/io.h>
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/of.h>
31 #include <linux/of_device.h>
32 #include <linux/pinctrl/consumer.h>
33 #include <linux/platform_device.h>
34 #include <linux/platform_data/i2c-pxa.h>
35 #include <linux/slab.h>
36 
37 /* I2C register field definitions */
38 #define IBMR_SDAS	(1 << 0)
39 #define IBMR_SCLS	(1 << 1)
40 
41 #define ICR_START	(1 << 0)	   /* start bit */
42 #define ICR_STOP	(1 << 1)	   /* stop bit */
43 #define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
44 #define ICR_TB		(1 << 3)	   /* transfer byte bit */
45 #define ICR_MA		(1 << 4)	   /* master abort */
46 #define ICR_SCLE	(1 << 5)	   /* master clock enable */
47 #define ICR_IUE		(1 << 6)	   /* unit enable */
48 #define ICR_GCD		(1 << 7)	   /* general call disable */
49 #define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
50 #define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
51 #define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
52 #define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
53 #define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
54 #define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
55 #define ICR_UR		(1 << 14)	   /* unit reset */
56 #define ICR_FM		(1 << 15)	   /* fast mode */
57 #define ICR_HS		(1 << 16)	   /* High Speed mode */
58 #define ICR_A3700_FM	(1 << 16)	   /* fast mode for armada-3700 */
59 #define ICR_A3700_HS	(1 << 17)	   /* high speed mode for armada-3700 */
60 #define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
61 
62 #define ISR_RWM		(1 << 0)	   /* read/write mode */
63 #define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
64 #define ISR_UB		(1 << 2)	   /* unit busy */
65 #define ISR_IBB		(1 << 3)	   /* bus busy */
66 #define ISR_SSD		(1 << 4)	   /* slave stop detected */
67 #define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
68 #define ISR_ITE		(1 << 6)	   /* tx buffer empty */
69 #define ISR_IRF		(1 << 7)	   /* rx buffer full */
70 #define ISR_GCAD	(1 << 8)	   /* general call address detected */
71 #define ISR_SAD		(1 << 9)	   /* slave address detected */
72 #define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
73 
74 #define ILCR_SLV_SHIFT		0
75 #define ILCR_SLV_MASK		(0x1FF << ILCR_SLV_SHIFT)
76 #define ILCR_FLV_SHIFT		9
77 #define ILCR_FLV_MASK		(0x1FF << ILCR_FLV_SHIFT)
78 #define ILCR_HLVL_SHIFT		18
79 #define ILCR_HLVL_MASK		(0x1FF << ILCR_HLVL_SHIFT)
80 #define ILCR_HLVH_SHIFT		27
81 #define ILCR_HLVH_MASK		(0x1F << ILCR_HLVH_SHIFT)
82 
83 #define IWCR_CNT_SHIFT		0
84 #define IWCR_CNT_MASK		(0x1F << IWCR_CNT_SHIFT)
85 #define IWCR_HS_CNT1_SHIFT	5
86 #define IWCR_HS_CNT1_MASK	(0x1F << IWCR_HS_CNT1_SHIFT)
87 #define IWCR_HS_CNT2_SHIFT	10
88 #define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
89 
90 /* need a longer timeout if we're dealing with the fact we may well be
91  * looking at a multi-master environment
92  */
93 #define DEF_TIMEOUT             32
94 
95 #define NO_SLAVE		(-ENXIO)
96 #define BUS_ERROR               (-EREMOTEIO)
97 #define XFER_NAKED              (-ECONNREFUSED)
98 #define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
99 
100 /* ICR initialize bit values
101  *
102  * 15 FM     0 (100 kHz operation)
103  * 14 UR     0 (No unit reset)
104  * 13 SADIE  0 (Disables the unit from interrupting on slave addresses
105  *              matching its slave address)
106  * 12 ALDIE  0 (Disables the unit from interrupt when it loses arbitration
107  *              in master mode)
108  * 11 SSDIE  0 (Disables interrupts from a slave stop detected, in slave mode)
109  * 10 BEIE   1 (Enable interrupts from detected bus errors, no ACK sent)
110  *  9 IRFIE  1 (Enable interrupts from full buffer received)
111  *  8 ITEIE  1 (Enables the I2C unit to interrupt when transmit buffer empty)
112  *  7 GCD    1 (Disables i2c unit response to general call messages as a slave)
113  *  6 IUE    0 (Disable unit until we change settings)
114  *  5 SCLE   1 (Enables the i2c clock output for master mode (drives SCL)
115  *  4 MA     0 (Only send stop with the ICR stop bit)
116  *  3 TB     0 (We are not transmitting a byte initially)
117  *  2 ACKNAK 0 (Send an ACK after the unit receives a byte)
118  *  1 STOP   0 (Do not send a STOP)
119  *  0 START  0 (Do not send a START)
120  */
121 #define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
122 
123 /* I2C status register init values
124  *
125  * 10 BED    1 (Clear bus error detected)
126  *  9 SAD    1 (Clear slave address detected)
127  *  7 IRF    1 (Clear IDBR Receive Full)
128  *  6 ITE    1 (Clear IDBR Transmit Empty)
129  *  5 ALD    1 (Clear Arbitration Loss Detected)
130  *  4 SSD    1 (Clear Slave Stop Detected)
131  */
132 #define I2C_ISR_INIT	0x7FF  /* status register init */
133 
134 struct pxa_reg_layout {
135 	u32 ibmr;
136 	u32 idbr;
137 	u32 icr;
138 	u32 isr;
139 	u32 isar;
140 	u32 ilcr;
141 	u32 iwcr;
142 	u32 fm;
143 	u32 hs;
144 };
145 
146 enum pxa_i2c_types {
147 	REGS_PXA2XX,
148 	REGS_PXA3XX,
149 	REGS_CE4100,
150 	REGS_PXA910,
151 	REGS_A3700,
152 };
153 
154 /* I2C register layout definitions */
155 static struct pxa_reg_layout pxa_reg_layout[] = {
156 	[REGS_PXA2XX] = {
157 		.ibmr =	0x00,
158 		.idbr =	0x08,
159 		.icr =	0x10,
160 		.isr =	0x18,
161 		.isar =	0x20,
162 		.fm = ICR_FM,
163 		.hs = ICR_HS,
164 	},
165 	[REGS_PXA3XX] = {
166 		.ibmr =	0x00,
167 		.idbr =	0x04,
168 		.icr =	0x08,
169 		.isr =	0x0c,
170 		.isar =	0x10,
171 		.fm = ICR_FM,
172 		.hs = ICR_HS,
173 	},
174 	[REGS_CE4100] = {
175 		.ibmr =	0x14,
176 		.idbr =	0x0c,
177 		.icr =	0x00,
178 		.isr =	0x04,
179 		/* no isar register */
180 		.fm = ICR_FM,
181 		.hs = ICR_HS,
182 	},
183 	[REGS_PXA910] = {
184 		.ibmr = 0x00,
185 		.idbr = 0x08,
186 		.icr =	0x10,
187 		.isr =	0x18,
188 		.isar = 0x20,
189 		.ilcr = 0x28,
190 		.iwcr = 0x30,
191 		.fm = ICR_FM,
192 		.hs = ICR_HS,
193 	},
194 	[REGS_A3700] = {
195 		.ibmr =	0x00,
196 		.idbr =	0x04,
197 		.icr =	0x08,
198 		.isr =	0x0c,
199 		.isar =	0x10,
200 		.fm = ICR_A3700_FM,
201 		.hs = ICR_A3700_HS,
202 	},
203 };
204 
205 static const struct of_device_id i2c_pxa_dt_ids[] = {
206 	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
207 	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
208 	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
209 	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
210 	{}
211 };
212 MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
213 
214 static const struct platform_device_id i2c_pxa_id_table[] = {
215 	{ "pxa2xx-i2c",		REGS_PXA2XX },
216 	{ "pxa3xx-pwri2c",	REGS_PXA3XX },
217 	{ "ce4100-i2c",		REGS_CE4100 },
218 	{ "pxa910-i2c",		REGS_PXA910 },
219 	{ "armada-3700-i2c",	REGS_A3700  },
220 	{ },
221 };
222 MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
223 
224 struct pxa_i2c {
225 	spinlock_t		lock;
226 	wait_queue_head_t	wait;
227 	struct i2c_msg		*msg;
228 	unsigned int		msg_num;
229 	unsigned int		msg_idx;
230 	unsigned int		msg_ptr;
231 	unsigned int		slave_addr;
232 	unsigned int		req_slave_addr;
233 
234 	struct i2c_adapter	adap;
235 	struct clk		*clk;
236 #ifdef CONFIG_I2C_PXA_SLAVE
237 	struct i2c_client	*slave;
238 #endif
239 
240 	unsigned int		irqlogidx;
241 	u32			isrlog[32];
242 	u32			icrlog[32];
243 
244 	void __iomem		*reg_base;
245 	void __iomem		*reg_ibmr;
246 	void __iomem		*reg_idbr;
247 	void __iomem		*reg_icr;
248 	void __iomem		*reg_isr;
249 	void __iomem		*reg_isar;
250 	void __iomem		*reg_ilcr;
251 	void __iomem		*reg_iwcr;
252 
253 	unsigned long		iobase;
254 	unsigned long		iosize;
255 
256 	int			irq;
257 	unsigned int		use_pio :1;
258 	unsigned int		fast_mode :1;
259 	unsigned int		high_mode:1;
260 	unsigned char		master_code;
261 	unsigned long		rate;
262 	bool			highmode_enter;
263 	u32			fm_mask;
264 	u32			hs_mask;
265 
266 	struct i2c_bus_recovery_info recovery;
267 };
268 
269 #define _IBMR(i2c)	((i2c)->reg_ibmr)
270 #define _IDBR(i2c)	((i2c)->reg_idbr)
271 #define _ICR(i2c)	((i2c)->reg_icr)
272 #define _ISR(i2c)	((i2c)->reg_isr)
273 #define _ISAR(i2c)	((i2c)->reg_isar)
274 #define _ILCR(i2c)	((i2c)->reg_ilcr)
275 #define _IWCR(i2c)	((i2c)->reg_iwcr)
276 
277 /*
278  * I2C Slave mode address
279  */
280 #define I2C_PXA_SLAVE_ADDR      0x1
281 
282 #ifdef DEBUG
283 
284 struct bits {
285 	u32	mask;
286 	const char *set;
287 	const char *unset;
288 };
289 #define PXA_BIT(m, s, u)	{ .mask = m, .set = s, .unset = u }
290 
291 static inline void
292 decode_bits(const char *prefix, const struct bits *bits, int num, u32 val)
293 {
294 	printk("%s %08x:", prefix, val);
295 	while (num--) {
296 		const char *str = val & bits->mask ? bits->set : bits->unset;
297 		if (str)
298 			pr_cont(" %s", str);
299 		bits++;
300 	}
301 	pr_cont("\n");
302 }
303 
304 static const struct bits isr_bits[] = {
305 	PXA_BIT(ISR_RWM,	"RX",		"TX"),
306 	PXA_BIT(ISR_ACKNAK,	"NAK",		"ACK"),
307 	PXA_BIT(ISR_UB,		"Bsy",		"Rdy"),
308 	PXA_BIT(ISR_IBB,	"BusBsy",	"BusRdy"),
309 	PXA_BIT(ISR_SSD,	"SlaveStop",	NULL),
310 	PXA_BIT(ISR_ALD,	"ALD",		NULL),
311 	PXA_BIT(ISR_ITE,	"TxEmpty",	NULL),
312 	PXA_BIT(ISR_IRF,	"RxFull",	NULL),
313 	PXA_BIT(ISR_GCAD,	"GenCall",	NULL),
314 	PXA_BIT(ISR_SAD,	"SlaveAddr",	NULL),
315 	PXA_BIT(ISR_BED,	"BusErr",	NULL),
316 };
317 
318 static void decode_ISR(unsigned int val)
319 {
320 	decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
321 }
322 
323 static const struct bits icr_bits[] = {
324 	PXA_BIT(ICR_START,  "START",	NULL),
325 	PXA_BIT(ICR_STOP,   "STOP",	NULL),
326 	PXA_BIT(ICR_ACKNAK, "ACKNAK",	NULL),
327 	PXA_BIT(ICR_TB,     "TB",	NULL),
328 	PXA_BIT(ICR_MA,     "MA",	NULL),
329 	PXA_BIT(ICR_SCLE,   "SCLE",	"scle"),
330 	PXA_BIT(ICR_IUE,    "IUE",	"iue"),
331 	PXA_BIT(ICR_GCD,    "GCD",	NULL),
332 	PXA_BIT(ICR_ITEIE,  "ITEIE",	NULL),
333 	PXA_BIT(ICR_IRFIE,  "IRFIE",	NULL),
334 	PXA_BIT(ICR_BEIE,   "BEIE",	NULL),
335 	PXA_BIT(ICR_SSDIE,  "SSDIE",	NULL),
336 	PXA_BIT(ICR_ALDIE,  "ALDIE",	NULL),
337 	PXA_BIT(ICR_SADIE,  "SADIE",	NULL),
338 	PXA_BIT(ICR_UR,     "UR",		"ur"),
339 };
340 
341 #ifdef CONFIG_I2C_PXA_SLAVE
342 static void decode_ICR(unsigned int val)
343 {
344 	decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
345 }
346 #endif
347 
348 static unsigned int i2c_debug = DEBUG;
349 
350 static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
351 {
352 	dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno,
353 		readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
354 }
355 
356 #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
357 
358 static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
359 {
360 	unsigned int i;
361 	struct device *dev = &i2c->adap.dev;
362 
363 	dev_err(dev, "slave_0x%x error: %s\n",
364 		i2c->req_slave_addr >> 1, why);
365 	dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n",
366 		i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
367 	dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n",
368 		readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)),
369 		readl(_ISR(i2c)));
370 	dev_err(dev, "log:");
371 	for (i = 0; i < i2c->irqlogidx; i++)
372 		pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]);
373 	pr_cont("\n");
374 }
375 
376 #else /* ifdef DEBUG */
377 
378 #define i2c_debug	0
379 
380 #define show_state(i2c) do { } while (0)
381 #define decode_ISR(val) do { } while (0)
382 #define decode_ICR(val) do { } while (0)
383 #define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0)
384 
385 #endif /* ifdef DEBUG / else */
386 
387 static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
388 
389 static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
390 {
391 	return !(readl(_ICR(i2c)) & ICR_SCLE);
392 }
393 
394 static void i2c_pxa_abort(struct pxa_i2c *i2c)
395 {
396 	int i = 250;
397 
398 	if (i2c_pxa_is_slavemode(i2c)) {
399 		dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
400 		return;
401 	}
402 
403 	while ((i > 0) && (readl(_IBMR(i2c)) & IBMR_SDAS) == 0) {
404 		unsigned long icr = readl(_ICR(i2c));
405 
406 		icr &= ~ICR_START;
407 		icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
408 
409 		writel(icr, _ICR(i2c));
410 
411 		show_state(i2c);
412 
413 		mdelay(1);
414 		i --;
415 	}
416 
417 	writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
418 	       _ICR(i2c));
419 }
420 
421 static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
422 {
423 	int timeout = DEF_TIMEOUT;
424 	u32 isr;
425 
426 	while (1) {
427 		isr = readl(_ISR(i2c));
428 		if (!(isr & (ISR_IBB | ISR_UB)))
429 			return 0;
430 
431 		if (isr & ISR_SAD)
432 			timeout += 4;
433 
434 		if (!timeout--)
435 			break;
436 
437 		msleep(2);
438 		show_state(i2c);
439 	}
440 
441 	show_state(i2c);
442 
443 	return I2C_RETRY;
444 }
445 
446 static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
447 {
448 	unsigned long timeout = jiffies + HZ*4;
449 
450 	while (time_before(jiffies, timeout)) {
451 		if (i2c_debug > 1)
452 			dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
453 				__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
454 
455 		if (readl(_ISR(i2c)) & ISR_SAD) {
456 			if (i2c_debug > 0)
457 				dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__);
458 			goto out;
459 		}
460 
461 		/* wait for unit and bus being not busy, and we also do a
462 		 * quick check of the i2c lines themselves to ensure they've
463 		 * gone high...
464 		 */
465 		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 &&
466 		    readl(_IBMR(i2c)) == (IBMR_SCLS | IBMR_SDAS)) {
467 			if (i2c_debug > 0)
468 				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
469 			return 1;
470 		}
471 
472 		msleep(1);
473 	}
474 
475 	if (i2c_debug > 0)
476 		dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__);
477  out:
478 	return 0;
479 }
480 
481 static int i2c_pxa_set_master(struct pxa_i2c *i2c)
482 {
483 	if (i2c_debug)
484 		dev_dbg(&i2c->adap.dev, "setting to bus master\n");
485 
486 	if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) {
487 		dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__);
488 		if (!i2c_pxa_wait_master(i2c)) {
489 			dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__);
490 			return I2C_RETRY;
491 		}
492 	}
493 
494 	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
495 	return 0;
496 }
497 
498 #ifdef CONFIG_I2C_PXA_SLAVE
499 static int i2c_pxa_wait_slave(struct pxa_i2c *i2c)
500 {
501 	unsigned long timeout = jiffies + HZ*1;
502 
503 	/* wait for stop */
504 
505 	show_state(i2c);
506 
507 	while (time_before(jiffies, timeout)) {
508 		if (i2c_debug > 1)
509 			dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
510 				__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
511 
512 		if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 ||
513 		    (readl(_ISR(i2c)) & ISR_SAD) != 0 ||
514 		    (readl(_ICR(i2c)) & ICR_SCLE) == 0) {
515 			if (i2c_debug > 1)
516 				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
517 			return 1;
518 		}
519 
520 		msleep(1);
521 	}
522 
523 	if (i2c_debug > 0)
524 		dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__);
525 	return 0;
526 }
527 
528 /*
529  * clear the hold on the bus, and take of anything else
530  * that has been configured
531  */
532 static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
533 {
534 	show_state(i2c);
535 
536 	if (errcode < 0) {
537 		udelay(100);   /* simple delay */
538 	} else {
539 		/* we need to wait for the stop condition to end */
540 
541 		/* if we where in stop, then clear... */
542 		if (readl(_ICR(i2c)) & ICR_STOP) {
543 			udelay(100);
544 			writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c));
545 		}
546 
547 		if (!i2c_pxa_wait_slave(i2c)) {
548 			dev_err(&i2c->adap.dev, "%s: wait timedout\n",
549 				__func__);
550 			return;
551 		}
552 	}
553 
554 	writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c));
555 	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
556 
557 	if (i2c_debug) {
558 		dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c)));
559 		decode_ICR(readl(_ICR(i2c)));
560 	}
561 }
562 #else
563 #define i2c_pxa_set_slave(i2c, err)	do { } while (0)
564 #endif
565 
566 static void i2c_pxa_do_reset(struct pxa_i2c *i2c)
567 {
568 	/* reset according to 9.8 */
569 	writel(ICR_UR, _ICR(i2c));
570 	writel(I2C_ISR_INIT, _ISR(i2c));
571 	writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
572 
573 	if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
574 		writel(i2c->slave_addr, _ISAR(i2c));
575 
576 	/* set control register values */
577 	writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c));
578 	writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c));
579 
580 #ifdef CONFIG_I2C_PXA_SLAVE
581 	dev_info(&i2c->adap.dev, "Enabling slave mode\n");
582 	writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
583 #endif
584 
585 	i2c_pxa_set_slave(i2c, 0);
586 }
587 
588 static void i2c_pxa_enable(struct pxa_i2c *i2c)
589 {
590 	/* enable unit */
591 	writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
592 	udelay(100);
593 }
594 
595 static void i2c_pxa_reset(struct pxa_i2c *i2c)
596 {
597 	pr_debug("Resetting I2C Controller Unit\n");
598 
599 	/* abort any transfer currently under way */
600 	i2c_pxa_abort(i2c);
601 	i2c_pxa_do_reset(i2c);
602 	i2c_pxa_enable(i2c);
603 }
604 
605 
606 #ifdef CONFIG_I2C_PXA_SLAVE
607 /*
608  * PXA I2C Slave mode
609  */
610 
611 static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
612 {
613 	if (isr & ISR_BED) {
614 		/* what should we do here? */
615 	} else {
616 		u8 byte = 0;
617 
618 		if (i2c->slave != NULL)
619 			i2c_slave_event(i2c->slave, I2C_SLAVE_READ_PROCESSED,
620 					&byte);
621 
622 		writel(byte, _IDBR(i2c));
623 		writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));   /* allow next byte */
624 	}
625 }
626 
627 static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
628 {
629 	u8 byte = readl(_IDBR(i2c));
630 
631 	if (i2c->slave != NULL)
632 		i2c_slave_event(i2c->slave, I2C_SLAVE_WRITE_RECEIVED, &byte);
633 
634 	writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
635 }
636 
637 static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
638 {
639 	int timeout;
640 
641 	if (i2c_debug > 0)
642 		dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n",
643 		       (isr & ISR_RWM) ? 'r' : 't');
644 
645 	if (i2c->slave != NULL) {
646 		if (isr & ISR_RWM) {
647 			u8 byte = 0;
648 
649 			i2c_slave_event(i2c->slave, I2C_SLAVE_READ_REQUESTED,
650 					&byte);
651 			writel(byte, _IDBR(i2c));
652 		} else {
653 			i2c_slave_event(i2c->slave, I2C_SLAVE_WRITE_REQUESTED,
654 					NULL);
655 		}
656 	}
657 
658 	/*
659 	 * slave could interrupt in the middle of us generating a
660 	 * start condition... if this happens, we'd better back off
661 	 * and stop holding the poor thing up
662 	 */
663 	writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
664 	writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
665 
666 	timeout = 0x10000;
667 
668 	while (1) {
669 		if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
670 			break;
671 
672 		timeout--;
673 
674 		if (timeout <= 0) {
675 			dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n");
676 			break;
677 		}
678 	}
679 
680 	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
681 }
682 
683 static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
684 {
685 	if (i2c_debug > 2)
686 		dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n");
687 
688 	if (i2c->slave != NULL)
689 		i2c_slave_event(i2c->slave, I2C_SLAVE_STOP, NULL);
690 
691 	if (i2c_debug > 2)
692 		dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n");
693 
694 	/*
695 	 * If we have a master-mode message waiting,
696 	 * kick it off now that the slave has completed.
697 	 */
698 	if (i2c->msg)
699 		i2c_pxa_master_complete(i2c, I2C_RETRY);
700 }
701 
702 static int i2c_pxa_slave_reg(struct i2c_client *slave)
703 {
704 	struct pxa_i2c *i2c = slave->adapter->algo_data;
705 
706 	if (i2c->slave)
707 		return -EBUSY;
708 
709 	if (!i2c->reg_isar)
710 		return -EAFNOSUPPORT;
711 
712 	i2c->slave = slave;
713 	i2c->slave_addr = slave->addr;
714 
715 	writel(i2c->slave_addr, _ISAR(i2c));
716 
717 	return 0;
718 }
719 
720 static int i2c_pxa_slave_unreg(struct i2c_client *slave)
721 {
722 	struct pxa_i2c *i2c = slave->adapter->algo_data;
723 
724 	WARN_ON(!i2c->slave);
725 
726 	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
727 	writel(i2c->slave_addr, _ISAR(i2c));
728 
729 	i2c->slave = NULL;
730 
731 	return 0;
732 }
733 #else
734 static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
735 {
736 	if (isr & ISR_BED) {
737 		/* what should we do here? */
738 	} else {
739 		writel(0, _IDBR(i2c));
740 		writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
741 	}
742 }
743 
744 static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
745 {
746 	writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
747 }
748 
749 static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
750 {
751 	int timeout;
752 
753 	/*
754 	 * slave could interrupt in the middle of us generating a
755 	 * start condition... if this happens, we'd better back off
756 	 * and stop holding the poor thing up
757 	 */
758 	writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
759 	writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
760 
761 	timeout = 0x10000;
762 
763 	while (1) {
764 		if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
765 			break;
766 
767 		timeout--;
768 
769 		if (timeout <= 0) {
770 			dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n");
771 			break;
772 		}
773 	}
774 
775 	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
776 }
777 
778 static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
779 {
780 	if (i2c->msg)
781 		i2c_pxa_master_complete(i2c, I2C_RETRY);
782 }
783 #endif
784 
785 /*
786  * PXA I2C Master mode
787  */
788 
789 static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
790 {
791 	u32 icr;
792 
793 	/*
794 	 * Step 1: target slave address into IDBR
795 	 */
796 	i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
797 	writel(i2c->req_slave_addr, _IDBR(i2c));
798 
799 	/*
800 	 * Step 2: initiate the write.
801 	 */
802 	icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
803 	writel(icr | ICR_START | ICR_TB, _ICR(i2c));
804 }
805 
806 static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
807 {
808 	u32 icr;
809 
810 	/* Clear the START, STOP, ACK, TB and MA flags */
811 	icr = readl(_ICR(i2c));
812 	icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA);
813 	writel(icr, _ICR(i2c));
814 }
815 
816 /*
817  * PXA I2C send master code
818  * 1. Load master code to IDBR and send it.
819  *    Note for HS mode, set ICR [GPIOEN].
820  * 2. Wait until win arbitration.
821  */
822 static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
823 {
824 	u32 icr;
825 	long timeout;
826 
827 	spin_lock_irq(&i2c->lock);
828 	i2c->highmode_enter = true;
829 	writel(i2c->master_code, _IDBR(i2c));
830 
831 	icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
832 	icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE;
833 	writel(icr, _ICR(i2c));
834 
835 	spin_unlock_irq(&i2c->lock);
836 	timeout = wait_event_timeout(i2c->wait,
837 			i2c->highmode_enter == false, HZ * 1);
838 
839 	i2c->highmode_enter = false;
840 
841 	return (timeout == 0) ? I2C_RETRY : 0;
842 }
843 
844 /*
845  * i2c_pxa_master_complete - complete the message and wake up.
846  */
847 static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret)
848 {
849 	i2c->msg_ptr = 0;
850 	i2c->msg = NULL;
851 	i2c->msg_idx ++;
852 	i2c->msg_num = 0;
853 	if (ret)
854 		i2c->msg_idx = ret;
855 	if (!i2c->use_pio)
856 		wake_up(&i2c->wait);
857 }
858 
859 static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
860 {
861 	u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
862 
863  again:
864 	/*
865 	 * If ISR_ALD is set, we lost arbitration.
866 	 */
867 	if (isr & ISR_ALD) {
868 		/*
869 		 * Do we need to do anything here?  The PXA docs
870 		 * are vague about what happens.
871 		 */
872 		i2c_pxa_scream_blue_murder(i2c, "ALD set");
873 
874 		/*
875 		 * We ignore this error.  We seem to see spurious ALDs
876 		 * for seemingly no reason.  If we handle them as I think
877 		 * they should, we end up causing an I2C error, which
878 		 * is painful for some systems.
879 		 */
880 		return; /* ignore */
881 	}
882 
883 	if ((isr & ISR_BED) &&
884 		(!((i2c->msg->flags & I2C_M_IGNORE_NAK) &&
885 			(isr & ISR_ACKNAK)))) {
886 		int ret = BUS_ERROR;
887 
888 		/*
889 		 * I2C bus error - either the device NAK'd us, or
890 		 * something more serious happened.  If we were NAK'd
891 		 * on the initial address phase, we can retry.
892 		 */
893 		if (isr & ISR_ACKNAK) {
894 			if (i2c->msg_ptr == 0 && i2c->msg_idx == 0)
895 				ret = NO_SLAVE;
896 			else
897 				ret = XFER_NAKED;
898 		}
899 		i2c_pxa_master_complete(i2c, ret);
900 	} else if (isr & ISR_RWM) {
901 		/*
902 		 * Read mode.  We have just sent the address byte, and
903 		 * now we must initiate the transfer.
904 		 */
905 		if (i2c->msg_ptr == i2c->msg->len - 1 &&
906 		    i2c->msg_idx == i2c->msg_num - 1)
907 			icr |= ICR_STOP | ICR_ACKNAK;
908 
909 		icr |= ICR_ALDIE | ICR_TB;
910 	} else if (i2c->msg_ptr < i2c->msg->len) {
911 		/*
912 		 * Write mode.  Write the next data byte.
913 		 */
914 		writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c));
915 
916 		icr |= ICR_ALDIE | ICR_TB;
917 
918 		/*
919 		 * If this is the last byte of the last message or last byte
920 		 * of any message with I2C_M_STOP (e.g. SCCB), send a STOP.
921 		 */
922 		if ((i2c->msg_ptr == i2c->msg->len) &&
923 			((i2c->msg->flags & I2C_M_STOP) ||
924 			(i2c->msg_idx == i2c->msg_num - 1)))
925 				icr |= ICR_STOP;
926 
927 	} else if (i2c->msg_idx < i2c->msg_num - 1) {
928 		/*
929 		 * Next segment of the message.
930 		 */
931 		i2c->msg_ptr = 0;
932 		i2c->msg_idx ++;
933 		i2c->msg++;
934 
935 		/*
936 		 * If we aren't doing a repeated start and address,
937 		 * go back and try to send the next byte.  Note that
938 		 * we do not support switching the R/W direction here.
939 		 */
940 		if (i2c->msg->flags & I2C_M_NOSTART)
941 			goto again;
942 
943 		/*
944 		 * Write the next address.
945 		 */
946 		i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
947 		writel(i2c->req_slave_addr, _IDBR(i2c));
948 
949 		/*
950 		 * And trigger a repeated start, and send the byte.
951 		 */
952 		icr &= ~ICR_ALDIE;
953 		icr |= ICR_START | ICR_TB;
954 	} else {
955 		if (i2c->msg->len == 0)
956 			icr |= ICR_MA;
957 		i2c_pxa_master_complete(i2c, 0);
958 	}
959 
960 	i2c->icrlog[i2c->irqlogidx-1] = icr;
961 
962 	writel(icr, _ICR(i2c));
963 	show_state(i2c);
964 }
965 
966 static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
967 {
968 	u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
969 
970 	/*
971 	 * Read the byte.
972 	 */
973 	i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c));
974 
975 	if (i2c->msg_ptr < i2c->msg->len) {
976 		/*
977 		 * If this is the last byte of the last
978 		 * message, send a STOP.
979 		 */
980 		if (i2c->msg_ptr == i2c->msg->len - 1)
981 			icr |= ICR_STOP | ICR_ACKNAK;
982 
983 		icr |= ICR_ALDIE | ICR_TB;
984 	} else {
985 		i2c_pxa_master_complete(i2c, 0);
986 	}
987 
988 	i2c->icrlog[i2c->irqlogidx-1] = icr;
989 
990 	writel(icr, _ICR(i2c));
991 }
992 
993 #define VALID_INT_SOURCE	(ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
994 				ISR_SAD | ISR_BED)
995 static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
996 {
997 	struct pxa_i2c *i2c = dev_id;
998 	u32 isr = readl(_ISR(i2c));
999 
1000 	if (!(isr & VALID_INT_SOURCE))
1001 		return IRQ_NONE;
1002 
1003 	if (i2c_debug > 2 && 0) {
1004 		dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
1005 			__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
1006 		decode_ISR(isr);
1007 	}
1008 
1009 	if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog))
1010 		i2c->isrlog[i2c->irqlogidx++] = isr;
1011 
1012 	show_state(i2c);
1013 
1014 	/*
1015 	 * Always clear all pending IRQs.
1016 	 */
1017 	writel(isr & VALID_INT_SOURCE, _ISR(i2c));
1018 
1019 	if (isr & ISR_SAD)
1020 		i2c_pxa_slave_start(i2c, isr);
1021 	if (isr & ISR_SSD)
1022 		i2c_pxa_slave_stop(i2c);
1023 
1024 	if (i2c_pxa_is_slavemode(i2c)) {
1025 		if (isr & ISR_ITE)
1026 			i2c_pxa_slave_txempty(i2c, isr);
1027 		if (isr & ISR_IRF)
1028 			i2c_pxa_slave_rxfull(i2c, isr);
1029 	} else if (i2c->msg && (!i2c->highmode_enter)) {
1030 		if (isr & ISR_ITE)
1031 			i2c_pxa_irq_txempty(i2c, isr);
1032 		if (isr & ISR_IRF)
1033 			i2c_pxa_irq_rxfull(i2c, isr);
1034 	} else if ((isr & ISR_ITE) && i2c->highmode_enter) {
1035 		i2c->highmode_enter = false;
1036 		wake_up(&i2c->wait);
1037 	} else {
1038 		i2c_pxa_scream_blue_murder(i2c, "spurious irq");
1039 	}
1040 
1041 	return IRQ_HANDLED;
1042 }
1043 
1044 /*
1045  * We are protected by the adapter bus mutex.
1046  */
1047 static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
1048 {
1049 	long timeout;
1050 	int ret;
1051 
1052 	/*
1053 	 * Wait for the bus to become free.
1054 	 */
1055 	ret = i2c_pxa_wait_bus_not_busy(i2c);
1056 	if (ret) {
1057 		dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
1058 		i2c_recover_bus(&i2c->adap);
1059 		goto out;
1060 	}
1061 
1062 	/*
1063 	 * Set master mode.
1064 	 */
1065 	ret = i2c_pxa_set_master(i2c);
1066 	if (ret) {
1067 		dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
1068 		goto out;
1069 	}
1070 
1071 	if (i2c->high_mode) {
1072 		ret = i2c_pxa_send_mastercode(i2c);
1073 		if (ret) {
1074 			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
1075 			goto out;
1076 			}
1077 	}
1078 
1079 	spin_lock_irq(&i2c->lock);
1080 
1081 	i2c->msg = msg;
1082 	i2c->msg_num = num;
1083 	i2c->msg_idx = 0;
1084 	i2c->msg_ptr = 0;
1085 	i2c->irqlogidx = 0;
1086 
1087 	i2c_pxa_start_message(i2c);
1088 
1089 	spin_unlock_irq(&i2c->lock);
1090 
1091 	/*
1092 	 * The rest of the processing occurs in the interrupt handler.
1093 	 */
1094 	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
1095 	i2c_pxa_stop_message(i2c);
1096 
1097 	/*
1098 	 * We place the return code in i2c->msg_idx.
1099 	 */
1100 	ret = i2c->msg_idx;
1101 
1102 	if (!timeout && i2c->msg_num) {
1103 		i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
1104 		i2c_recover_bus(&i2c->adap);
1105 		ret = I2C_RETRY;
1106 	}
1107 
1108  out:
1109 	return ret;
1110 }
1111 
1112 static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c,
1113 				 struct i2c_msg *msgs, int num,
1114 				 int (*xfer)(struct pxa_i2c *,
1115 					     struct i2c_msg *, int num))
1116 {
1117 	int ret, i;
1118 
1119 	for (i = 0; ; ) {
1120 		ret = xfer(i2c, msgs, num);
1121 		if (ret != I2C_RETRY && ret != NO_SLAVE)
1122 			goto out;
1123 		if (++i >= i2c->adap.retries)
1124 			break;
1125 
1126 		if (i2c_debug)
1127 			dev_dbg(&i2c->adap.dev, "Retrying transmission\n");
1128 		udelay(100);
1129 	}
1130 	if (ret != NO_SLAVE)
1131 		i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
1132 	ret = -EREMOTEIO;
1133  out:
1134 	i2c_pxa_set_slave(i2c, ret);
1135 	return ret;
1136 }
1137 
1138 static int i2c_pxa_xfer(struct i2c_adapter *adap,
1139 			struct i2c_msg msgs[], int num)
1140 {
1141 	struct pxa_i2c *i2c = adap->algo_data;
1142 
1143 	return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_xfer);
1144 }
1145 
1146 static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
1147 {
1148 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
1149 		I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
1150 }
1151 
1152 static const struct i2c_algorithm i2c_pxa_algorithm = {
1153 	.master_xfer	= i2c_pxa_xfer,
1154 	.functionality	= i2c_pxa_functionality,
1155 #ifdef CONFIG_I2C_PXA_SLAVE
1156 	.reg_slave	= i2c_pxa_slave_reg,
1157 	.unreg_slave	= i2c_pxa_slave_unreg,
1158 #endif
1159 };
1160 
1161 /* Non-interrupt mode support */
1162 static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
1163 {
1164 	/* make timeout the same as for interrupt based functions */
1165 	long timeout = 2 * DEF_TIMEOUT;
1166 
1167 	/*
1168 	 * Wait for the bus to become free.
1169 	 */
1170 	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB))
1171 		udelay(1000);
1172 
1173 	if (timeout < 0) {
1174 		show_state(i2c);
1175 		dev_err(&i2c->adap.dev,
1176 			"i2c_pxa: timeout waiting for bus free (set_master)\n");
1177 		return I2C_RETRY;
1178 	}
1179 
1180 	/*
1181 	 * Set master mode.
1182 	 */
1183 	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
1184 
1185 	return 0;
1186 }
1187 
1188 static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
1189 			       struct i2c_msg *msg, int num)
1190 {
1191 	unsigned long timeout = 500000; /* 5 seconds */
1192 	int ret = 0;
1193 
1194 	ret = i2c_pxa_pio_set_master(i2c);
1195 	if (ret)
1196 		goto out;
1197 
1198 	i2c->msg = msg;
1199 	i2c->msg_num = num;
1200 	i2c->msg_idx = 0;
1201 	i2c->msg_ptr = 0;
1202 	i2c->irqlogidx = 0;
1203 
1204 	i2c_pxa_start_message(i2c);
1205 
1206 	while (i2c->msg_num > 0 && --timeout) {
1207 		i2c_pxa_handler(0, i2c);
1208 		udelay(10);
1209 	}
1210 
1211 	i2c_pxa_stop_message(i2c);
1212 
1213 	/*
1214 	 * We place the return code in i2c->msg_idx.
1215 	 */
1216 	ret = i2c->msg_idx;
1217 
1218 out:
1219 	if (timeout == 0) {
1220 		i2c_pxa_scream_blue_murder(i2c, "timeout (do_pio_xfer)");
1221 		ret = I2C_RETRY;
1222 	}
1223 
1224 	return ret;
1225 }
1226 
1227 static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
1228 			    struct i2c_msg msgs[], int num)
1229 {
1230 	struct pxa_i2c *i2c = adap->algo_data;
1231 
1232 	/* If the I2C controller is disabled we need to reset it
1233 	  (probably due to a suspend/resume destroying state). We do
1234 	  this here as we can then avoid worrying about resuming the
1235 	  controller before its users. */
1236 	if (!(readl(_ICR(i2c)) & ICR_IUE))
1237 		i2c_pxa_reset(i2c);
1238 
1239 	return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_pio_xfer);
1240 }
1241 
1242 static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
1243 	.master_xfer	= i2c_pxa_pio_xfer,
1244 	.functionality	= i2c_pxa_functionality,
1245 #ifdef CONFIG_I2C_PXA_SLAVE
1246 	.reg_slave	= i2c_pxa_slave_reg,
1247 	.unreg_slave	= i2c_pxa_slave_unreg,
1248 #endif
1249 };
1250 
1251 static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
1252 			    enum pxa_i2c_types *i2c_types)
1253 {
1254 	struct device_node *np = pdev->dev.of_node;
1255 	const struct of_device_id *of_id =
1256 			of_match_device(i2c_pxa_dt_ids, &pdev->dev);
1257 
1258 	if (!of_id)
1259 		return 1;
1260 
1261 	/* For device tree we always use the dynamic or alias-assigned ID */
1262 	i2c->adap.nr = -1;
1263 
1264 	i2c->use_pio = of_property_read_bool(np, "mrvl,i2c-polling");
1265 	i2c->fast_mode = of_property_read_bool(np, "mrvl,i2c-fast-mode");
1266 
1267 	*i2c_types = (enum pxa_i2c_types)(of_id->data);
1268 
1269 	return 0;
1270 }
1271 
1272 static int i2c_pxa_probe_pdata(struct platform_device *pdev,
1273 			       struct pxa_i2c *i2c,
1274 			       enum pxa_i2c_types *i2c_types)
1275 {
1276 	struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev);
1277 	const struct platform_device_id *id = platform_get_device_id(pdev);
1278 
1279 	*i2c_types = id->driver_data;
1280 	if (plat) {
1281 		i2c->use_pio = plat->use_pio;
1282 		i2c->fast_mode = plat->fast_mode;
1283 		i2c->high_mode = plat->high_mode;
1284 		i2c->master_code = plat->master_code;
1285 		if (!i2c->master_code)
1286 			i2c->master_code = 0xe;
1287 		i2c->rate = plat->rate;
1288 	}
1289 	return 0;
1290 }
1291 
1292 static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap)
1293 {
1294 	struct pxa_i2c *i2c = adap->algo_data;
1295 	u32 ibmr = readl(_IBMR(i2c));
1296 
1297 	/*
1298 	 * Program the GPIOs to reflect the current I2C bus state while
1299 	 * we transition to recovery; this avoids glitching the bus.
1300 	 */
1301 	gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS);
1302 	gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS);
1303 }
1304 
1305 static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap)
1306 {
1307 	struct pxa_i2c *i2c = adap->algo_data;
1308 	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
1309 	u32 isr;
1310 
1311 	/*
1312 	 * The bus should now be free. Clear up the I2C controller before
1313 	 * handing control of the bus back to avoid the bus changing state.
1314 	 */
1315 	isr = readl(_ISR(i2c));
1316 	if (isr & (ISR_UB | ISR_IBB)) {
1317 		dev_dbg(&i2c->adap.dev,
1318 			"recovery: resetting controller, ISR=0x%08x\n", isr);
1319 		i2c_pxa_do_reset(i2c);
1320 	}
1321 
1322 	WARN_ON(pinctrl_select_state(bri->pinctrl, bri->pins_default));
1323 
1324 	dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n",
1325 	        readl(_IBMR(i2c)), readl(_ISR(i2c)));
1326 
1327 	i2c_pxa_enable(i2c);
1328 }
1329 
1330 static int i2c_pxa_init_recovery(struct pxa_i2c *i2c)
1331 {
1332 	struct i2c_bus_recovery_info *bri = &i2c->recovery;
1333 	struct device *dev = i2c->adap.dev.parent;
1334 
1335 	/*
1336 	 * When slave mode is enabled, we are not the only master on the bus.
1337 	 * Bus recovery can only be performed when we are the master, which
1338 	 * we can't be certain of. Therefore, when slave mode is enabled, do
1339 	 * not configure bus recovery.
1340 	 */
1341 	if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
1342 		return 0;
1343 
1344 	bri->pinctrl = devm_pinctrl_get(dev);
1345 	if (PTR_ERR(bri->pinctrl) == -ENODEV) {
1346 		bri->pinctrl = NULL;
1347 		return 0;
1348 	}
1349 	if (IS_ERR(bri->pinctrl))
1350 		return PTR_ERR(bri->pinctrl);
1351 
1352 	bri->prepare_recovery = i2c_pxa_prepare_recovery;
1353 	bri->unprepare_recovery = i2c_pxa_unprepare_recovery;
1354 
1355 	i2c->adap.bus_recovery_info = bri;
1356 
1357 	return 0;
1358 }
1359 
1360 static int i2c_pxa_probe(struct platform_device *dev)
1361 {
1362 	struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
1363 	enum pxa_i2c_types i2c_type;
1364 	struct pxa_i2c *i2c;
1365 	struct resource *res = NULL;
1366 	int ret, irq;
1367 
1368 	i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL);
1369 	if (!i2c)
1370 		return -ENOMEM;
1371 
1372 	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
1373 	i2c->adap.nr = dev->id;
1374 	i2c->adap.owner   = THIS_MODULE;
1375 	i2c->adap.retries = 5;
1376 	i2c->adap.algo_data = i2c;
1377 	i2c->adap.dev.parent = &dev->dev;
1378 #ifdef CONFIG_OF
1379 	i2c->adap.dev.of_node = dev->dev.of_node;
1380 #endif
1381 
1382 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
1383 	i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
1384 	if (IS_ERR(i2c->reg_base))
1385 		return PTR_ERR(i2c->reg_base);
1386 
1387 	irq = platform_get_irq(dev, 0);
1388 	if (irq < 0)
1389 		return irq;
1390 
1391 	ret = i2c_pxa_init_recovery(i2c);
1392 	if (ret)
1393 		return ret;
1394 
1395 	ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
1396 	if (ret > 0)
1397 		ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
1398 	if (ret < 0)
1399 		return ret;
1400 
1401 	spin_lock_init(&i2c->lock);
1402 	init_waitqueue_head(&i2c->wait);
1403 
1404 	strscpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name));
1405 
1406 	i2c->clk = devm_clk_get(&dev->dev, NULL);
1407 	if (IS_ERR(i2c->clk)) {
1408 		dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk));
1409 		return PTR_ERR(i2c->clk);
1410 	}
1411 
1412 	i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
1413 	i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
1414 	i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
1415 	i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
1416 	i2c->fm_mask = pxa_reg_layout[i2c_type].fm;
1417 	i2c->hs_mask = pxa_reg_layout[i2c_type].hs;
1418 
1419 	if (i2c_type != REGS_CE4100)
1420 		i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
1421 
1422 	if (i2c_type == REGS_PXA910) {
1423 		i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr;
1424 		i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr;
1425 	}
1426 
1427 	i2c->iobase = res->start;
1428 	i2c->iosize = resource_size(res);
1429 
1430 	i2c->irq = irq;
1431 
1432 	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
1433 	i2c->highmode_enter = false;
1434 
1435 	if (plat) {
1436 		i2c->adap.class = plat->class;
1437 	}
1438 
1439 	if (i2c->high_mode) {
1440 		if (i2c->rate) {
1441 			clk_set_rate(i2c->clk, i2c->rate);
1442 			pr_info("i2c: <%s> set rate to %ld\n",
1443 				i2c->adap.name, clk_get_rate(i2c->clk));
1444 		} else
1445 			pr_warn("i2c: <%s> clock rate not set\n",
1446 				i2c->adap.name);
1447 	}
1448 
1449 	clk_prepare_enable(i2c->clk);
1450 
1451 	if (i2c->use_pio) {
1452 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
1453 	} else {
1454 		i2c->adap.algo = &i2c_pxa_algorithm;
1455 		ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler,
1456 				IRQF_SHARED | IRQF_NO_SUSPEND,
1457 				dev_name(&dev->dev), i2c);
1458 		if (ret) {
1459 			dev_err(&dev->dev, "failed to request irq: %d\n", ret);
1460 			goto ereqirq;
1461 		}
1462 	}
1463 
1464 	i2c_pxa_reset(i2c);
1465 
1466 	ret = i2c_add_numbered_adapter(&i2c->adap);
1467 	if (ret < 0)
1468 		goto ereqirq;
1469 
1470 	platform_set_drvdata(dev, i2c);
1471 
1472 #ifdef CONFIG_I2C_PXA_SLAVE
1473 	dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n",
1474 		i2c->slave_addr);
1475 #else
1476 	dev_info(&i2c->adap.dev, " PXA I2C adapter\n");
1477 #endif
1478 	return 0;
1479 
1480 ereqirq:
1481 	clk_disable_unprepare(i2c->clk);
1482 	return ret;
1483 }
1484 
1485 static int i2c_pxa_remove(struct platform_device *dev)
1486 {
1487 	struct pxa_i2c *i2c = platform_get_drvdata(dev);
1488 
1489 	i2c_del_adapter(&i2c->adap);
1490 
1491 	clk_disable_unprepare(i2c->clk);
1492 
1493 	return 0;
1494 }
1495 
1496 #ifdef CONFIG_PM
1497 static int i2c_pxa_suspend_noirq(struct device *dev)
1498 {
1499 	struct pxa_i2c *i2c = dev_get_drvdata(dev);
1500 
1501 	clk_disable(i2c->clk);
1502 
1503 	return 0;
1504 }
1505 
1506 static int i2c_pxa_resume_noirq(struct device *dev)
1507 {
1508 	struct pxa_i2c *i2c = dev_get_drvdata(dev);
1509 
1510 	clk_enable(i2c->clk);
1511 	i2c_pxa_reset(i2c);
1512 
1513 	return 0;
1514 }
1515 
1516 static const struct dev_pm_ops i2c_pxa_dev_pm_ops = {
1517 	.suspend_noirq = i2c_pxa_suspend_noirq,
1518 	.resume_noirq = i2c_pxa_resume_noirq,
1519 };
1520 
1521 #define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops)
1522 #else
1523 #define I2C_PXA_DEV_PM_OPS NULL
1524 #endif
1525 
1526 static struct platform_driver i2c_pxa_driver = {
1527 	.probe		= i2c_pxa_probe,
1528 	.remove		= i2c_pxa_remove,
1529 	.driver		= {
1530 		.name	= "pxa2xx-i2c",
1531 		.pm	= I2C_PXA_DEV_PM_OPS,
1532 		.of_match_table = i2c_pxa_dt_ids,
1533 	},
1534 	.id_table	= i2c_pxa_id_table,
1535 };
1536 
1537 static int __init i2c_adap_pxa_init(void)
1538 {
1539 	return platform_driver_register(&i2c_pxa_driver);
1540 }
1541 
1542 static void __exit i2c_adap_pxa_exit(void)
1543 {
1544 	platform_driver_unregister(&i2c_pxa_driver);
1545 }
1546 
1547 MODULE_LICENSE("GPL");
1548 
1549 subsys_initcall(i2c_adap_pxa_init);
1550 module_exit(i2c_adap_pxa_exit);
1551