xref: /linux/drivers/iio/adc/max1241.c (revision 0be3ff0c)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * MAX1241 low-power, 12-bit serial ADC
4  *
5  * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
6  */
7 
8 #include <linux/delay.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/iio/iio.h>
11 #include <linux/module.h>
12 #include <linux/regulator/consumer.h>
13 #include <linux/spi/spi.h>
14 
15 #define MAX1241_VAL_MASK GENMASK(11, 0)
16 #define MAX1241_SHUTDOWN_DELAY_USEC 4
17 
18 enum max1241_id {
19 	max1241,
20 };
21 
22 struct max1241 {
23 	struct spi_device *spi;
24 	struct mutex lock;
25 	struct regulator *vdd;
26 	struct regulator *vref;
27 	struct gpio_desc *shutdown;
28 
29 	__be16 data ____cacheline_aligned;
30 };
31 
32 static const struct iio_chan_spec max1241_channels[] = {
33 	{
34 		.type = IIO_VOLTAGE,
35 		.indexed = 1,
36 		.channel = 0,
37 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
38 				BIT(IIO_CHAN_INFO_SCALE),
39 	},
40 };
41 
42 static int max1241_read(struct max1241 *adc)
43 {
44 	struct spi_transfer xfers[] = {
45 		/*
46 		 * Begin conversion by bringing /CS low for at least
47 		 * tconv us.
48 		 */
49 		{
50 			.len = 0,
51 			.delay.value = 8,
52 			.delay.unit = SPI_DELAY_UNIT_USECS,
53 		},
54 		/*
55 		 * Then read two bytes of data in our RX buffer.
56 		 */
57 		{
58 			.rx_buf = &adc->data,
59 			.len = 2,
60 		},
61 	};
62 
63 	return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
64 }
65 
66 static int max1241_read_raw(struct iio_dev *indio_dev,
67 			struct iio_chan_spec const *chan,
68 			int *val, int *val2, long mask)
69 {
70 	int ret, vref_uV;
71 	struct max1241 *adc = iio_priv(indio_dev);
72 
73 	switch (mask) {
74 	case IIO_CHAN_INFO_RAW:
75 		mutex_lock(&adc->lock);
76 
77 		if (adc->shutdown) {
78 			gpiod_set_value(adc->shutdown, 0);
79 			udelay(MAX1241_SHUTDOWN_DELAY_USEC);
80 			ret = max1241_read(adc);
81 			gpiod_set_value(adc->shutdown, 1);
82 		} else
83 			ret = max1241_read(adc);
84 
85 		if (ret) {
86 			mutex_unlock(&adc->lock);
87 			return ret;
88 		}
89 
90 		*val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
91 
92 		mutex_unlock(&adc->lock);
93 		return IIO_VAL_INT;
94 	case IIO_CHAN_INFO_SCALE:
95 		vref_uV = regulator_get_voltage(adc->vref);
96 
97 		if (vref_uV < 0)
98 			return vref_uV;
99 
100 		*val = vref_uV / 1000;
101 		*val2 = 12;
102 
103 		return IIO_VAL_FRACTIONAL_LOG2;
104 	default:
105 		return -EINVAL;
106 	}
107 }
108 
109 static const struct iio_info max1241_info = {
110 	.read_raw = max1241_read_raw,
111 };
112 
113 static void max1241_disable_vdd_action(void *data)
114 {
115 	struct max1241 *adc = data;
116 	struct device *dev = &adc->spi->dev;
117 	int err;
118 
119 	err = regulator_disable(adc->vdd);
120 	if (err)
121 		dev_err(dev, "could not disable vdd regulator.\n");
122 }
123 
124 static void max1241_disable_vref_action(void *data)
125 {
126 	struct max1241 *adc = data;
127 	struct device *dev = &adc->spi->dev;
128 	int err;
129 
130 	err = regulator_disable(adc->vref);
131 	if (err)
132 		dev_err(dev, "could not disable vref regulator.\n");
133 }
134 
135 static int max1241_probe(struct spi_device *spi)
136 {
137 	struct device *dev = &spi->dev;
138 	struct iio_dev *indio_dev;
139 	struct max1241 *adc;
140 	int ret;
141 
142 	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
143 	if (!indio_dev)
144 		return -ENOMEM;
145 
146 	adc = iio_priv(indio_dev);
147 	adc->spi = spi;
148 	mutex_init(&adc->lock);
149 
150 	adc->vdd = devm_regulator_get(dev, "vdd");
151 	if (IS_ERR(adc->vdd))
152 		return dev_err_probe(dev, PTR_ERR(adc->vdd),
153 				     "failed to get vdd regulator\n");
154 
155 	ret = regulator_enable(adc->vdd);
156 	if (ret)
157 		return ret;
158 
159 	ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
160 	if (ret) {
161 		dev_err(dev, "could not set up vdd regulator cleanup action\n");
162 		return ret;
163 	}
164 
165 	adc->vref = devm_regulator_get(dev, "vref");
166 	if (IS_ERR(adc->vref))
167 		return dev_err_probe(dev, PTR_ERR(adc->vref),
168 				     "failed to get vref regulator\n");
169 
170 	ret = regulator_enable(adc->vref);
171 	if (ret)
172 		return ret;
173 
174 	ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
175 	if (ret) {
176 		dev_err(dev, "could not set up vref regulator cleanup action\n");
177 		return ret;
178 	}
179 
180 	adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
181 						GPIOD_OUT_HIGH);
182 	if (IS_ERR(adc->shutdown))
183 		return dev_err_probe(dev, PTR_ERR(adc->shutdown),
184 				     "cannot get shutdown gpio\n");
185 
186 	if (adc->shutdown)
187 		dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
188 	else
189 		dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
190 
191 	indio_dev->name = spi_get_device_id(spi)->name;
192 	indio_dev->info = &max1241_info;
193 	indio_dev->modes = INDIO_DIRECT_MODE;
194 	indio_dev->channels = max1241_channels;
195 	indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
196 
197 	return devm_iio_device_register(dev, indio_dev);
198 }
199 
200 static const struct spi_device_id max1241_id[] = {
201 	{ "max1241", max1241 },
202 	{}
203 };
204 
205 static const struct of_device_id max1241_dt_ids[] = {
206 	{ .compatible = "maxim,max1241" },
207 	{}
208 };
209 MODULE_DEVICE_TABLE(of, max1241_dt_ids);
210 
211 static struct spi_driver max1241_spi_driver = {
212 	.driver = {
213 		.name = "max1241",
214 		.of_match_table = max1241_dt_ids,
215 	},
216 	.probe = max1241_probe,
217 	.id_table = max1241_id,
218 };
219 module_spi_driver(max1241_spi_driver);
220 
221 MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
222 MODULE_DESCRIPTION("MAX1241 ADC driver");
223 MODULE_LICENSE("GPL v2");
224