xref: /linux/drivers/iio/adc/npcm_adc.c (revision 52338415)
1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (c) 2019 Nuvoton Technology corporation.
3 
4 #include <linux/clk.h>
5 #include <linux/device.h>
6 #include <linux/mfd/syscon.h>
7 #include <linux/io.h>
8 #include <linux/iio/iio.h>
9 #include <linux/interrupt.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/platform_device.h>
13 #include <linux/regmap.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/spinlock.h>
16 #include <linux/uaccess.h>
17 
18 struct npcm_adc {
19 	bool int_status;
20 	u32 adc_sample_hz;
21 	struct device *dev;
22 	void __iomem *regs;
23 	struct clk *adc_clk;
24 	wait_queue_head_t wq;
25 	struct regulator *vref;
26 	struct regmap *rst_regmap;
27 };
28 
29 /* NPCM7xx reset module */
30 #define NPCM7XX_IPSRST1_OFFSET		0x020
31 #define NPCM7XX_IPSRST1_ADC_RST		BIT(27)
32 
33 /* ADC registers */
34 #define NPCM_ADCCON	 0x00
35 #define NPCM_ADCDATA	 0x04
36 
37 /* ADCCON Register Bits */
38 #define NPCM_ADCCON_ADC_INT_EN		BIT(21)
39 #define NPCM_ADCCON_REFSEL		BIT(19)
40 #define NPCM_ADCCON_ADC_INT_ST		BIT(18)
41 #define NPCM_ADCCON_ADC_EN		BIT(17)
42 #define NPCM_ADCCON_ADC_RST		BIT(16)
43 #define NPCM_ADCCON_ADC_CONV		BIT(13)
44 
45 #define NPCM_ADCCON_CH_MASK		GENMASK(27, 24)
46 #define NPCM_ADCCON_CH(x)		((x) << 24)
47 #define NPCM_ADCCON_DIV_SHIFT		1
48 #define NPCM_ADCCON_DIV_MASK		GENMASK(8, 1)
49 #define NPCM_ADC_DATA_MASK(x)		((x) & GENMASK(9, 0))
50 
51 #define NPCM_ADC_ENABLE		(NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
52 
53 /* ADC General Definition */
54 #define NPCM_RESOLUTION_BITS		10
55 #define NPCM_INT_VREF_MV		2000
56 
57 #define NPCM_ADC_CHAN(ch) {					\
58 	.type = IIO_VOLTAGE,					\
59 	.indexed = 1,						\
60 	.channel = ch,						\
61 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
62 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
63 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
64 }
65 
66 static const struct iio_chan_spec npcm_adc_iio_channels[] = {
67 	NPCM_ADC_CHAN(0),
68 	NPCM_ADC_CHAN(1),
69 	NPCM_ADC_CHAN(2),
70 	NPCM_ADC_CHAN(3),
71 	NPCM_ADC_CHAN(4),
72 	NPCM_ADC_CHAN(5),
73 	NPCM_ADC_CHAN(6),
74 	NPCM_ADC_CHAN(7),
75 };
76 
77 static irqreturn_t npcm_adc_isr(int irq, void *data)
78 {
79 	u32 regtemp;
80 	struct iio_dev *indio_dev = data;
81 	struct npcm_adc *info = iio_priv(indio_dev);
82 
83 	regtemp = ioread32(info->regs + NPCM_ADCCON);
84 	if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
85 		iowrite32(regtemp, info->regs + NPCM_ADCCON);
86 		wake_up_interruptible(&info->wq);
87 		info->int_status = true;
88 	}
89 
90 	return IRQ_HANDLED;
91 }
92 
93 static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
94 {
95 	int ret;
96 	u32 regtemp;
97 
98 	/* Select ADC channel */
99 	regtemp = ioread32(info->regs + NPCM_ADCCON);
100 	regtemp &= ~NPCM_ADCCON_CH_MASK;
101 	info->int_status = false;
102 	iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
103 		  NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
104 
105 	ret = wait_event_interruptible_timeout(info->wq, info->int_status,
106 					       msecs_to_jiffies(10));
107 	if (ret == 0) {
108 		regtemp = ioread32(info->regs + NPCM_ADCCON);
109 		if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
110 			/* if conversion failed - reset ADC module */
111 			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
112 				     NPCM7XX_IPSRST1_ADC_RST);
113 			msleep(100);
114 			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
115 				     0x0);
116 			msleep(100);
117 
118 			/* Enable ADC and start conversion module */
119 			iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
120 				  info->regs + NPCM_ADCCON);
121 			dev_err(info->dev, "RESET ADC Complete\n");
122 		}
123 		return -ETIMEDOUT;
124 	}
125 	if (ret < 0)
126 		return ret;
127 
128 	*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
129 
130 	return 0;
131 }
132 
133 static int npcm_adc_read_raw(struct iio_dev *indio_dev,
134 			     struct iio_chan_spec const *chan, int *val,
135 			     int *val2, long mask)
136 {
137 	int ret;
138 	int vref_uv;
139 	struct npcm_adc *info = iio_priv(indio_dev);
140 
141 	switch (mask) {
142 	case IIO_CHAN_INFO_RAW:
143 		mutex_lock(&indio_dev->mlock);
144 		ret = npcm_adc_read(info, val, chan->channel);
145 		mutex_unlock(&indio_dev->mlock);
146 		if (ret) {
147 			dev_err(info->dev, "NPCM ADC read failed\n");
148 			return ret;
149 		}
150 		return IIO_VAL_INT;
151 	case IIO_CHAN_INFO_SCALE:
152 		if (!IS_ERR(info->vref)) {
153 			vref_uv = regulator_get_voltage(info->vref);
154 			*val = vref_uv / 1000;
155 		} else {
156 			*val = NPCM_INT_VREF_MV;
157 		}
158 		*val2 = NPCM_RESOLUTION_BITS;
159 		return IIO_VAL_FRACTIONAL_LOG2;
160 	case IIO_CHAN_INFO_SAMP_FREQ:
161 		*val = info->adc_sample_hz;
162 		return IIO_VAL_INT;
163 	default:
164 		return -EINVAL;
165 	}
166 
167 	return 0;
168 }
169 
170 static const struct iio_info npcm_adc_iio_info = {
171 	.read_raw = &npcm_adc_read_raw,
172 };
173 
174 static const struct of_device_id npcm_adc_match[] = {
175 	{ .compatible = "nuvoton,npcm750-adc", },
176 	{ /* sentinel */ }
177 };
178 MODULE_DEVICE_TABLE(of, npcm_adc_match);
179 
180 static int npcm_adc_probe(struct platform_device *pdev)
181 {
182 	int ret;
183 	int irq;
184 	u32 div;
185 	u32 reg_con;
186 	struct resource *res;
187 	struct npcm_adc *info;
188 	struct iio_dev *indio_dev;
189 	struct device *dev = &pdev->dev;
190 	struct device_node *np = pdev->dev.of_node;
191 
192 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
193 	if (!indio_dev)
194 		return -ENOMEM;
195 	info = iio_priv(indio_dev);
196 
197 	info->dev = &pdev->dev;
198 
199 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
200 	info->regs = devm_ioremap_resource(&pdev->dev, res);
201 	if (IS_ERR(info->regs))
202 		return PTR_ERR(info->regs);
203 
204 	info->adc_clk = devm_clk_get(&pdev->dev, NULL);
205 	if (IS_ERR(info->adc_clk)) {
206 		dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
207 		return PTR_ERR(info->adc_clk);
208 	}
209 
210 	/* calculate ADC clock sample rate */
211 	reg_con = ioread32(info->regs + NPCM_ADCCON);
212 	div = reg_con & NPCM_ADCCON_DIV_MASK;
213 	div = div >> NPCM_ADCCON_DIV_SHIFT;
214 	info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
215 
216 	if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
217 		info->rst_regmap = syscon_regmap_lookup_by_compatible
218 			("nuvoton,npcm750-rst");
219 		if (IS_ERR(info->rst_regmap)) {
220 			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
221 			ret = PTR_ERR(info->rst_regmap);
222 			goto err_disable_clk;
223 		}
224 	}
225 
226 	irq = platform_get_irq(pdev, 0);
227 	if (irq <= 0) {
228 		ret = -EINVAL;
229 		goto err_disable_clk;
230 	}
231 
232 	ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
233 			       "NPCM_ADC", indio_dev);
234 	if (ret < 0) {
235 		dev_err(dev, "failed requesting interrupt\n");
236 		goto err_disable_clk;
237 	}
238 
239 	reg_con = ioread32(info->regs + NPCM_ADCCON);
240 	info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
241 	if (!IS_ERR(info->vref)) {
242 		ret = regulator_enable(info->vref);
243 		if (ret) {
244 			dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
245 			goto err_disable_clk;
246 		}
247 
248 		iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
249 			  info->regs + NPCM_ADCCON);
250 	} else {
251 		/*
252 		 * Any error which is not ENODEV indicates the regulator
253 		 * has been specified and so is a failure case.
254 		 */
255 		if (PTR_ERR(info->vref) != -ENODEV) {
256 			ret = PTR_ERR(info->vref);
257 			goto err_disable_clk;
258 		}
259 
260 		/* Use internal reference */
261 		iowrite32(reg_con | NPCM_ADCCON_REFSEL,
262 			  info->regs + NPCM_ADCCON);
263 	}
264 
265 	init_waitqueue_head(&info->wq);
266 
267 	reg_con = ioread32(info->regs + NPCM_ADCCON);
268 	reg_con |= NPCM_ADC_ENABLE;
269 
270 	/* Enable the ADC Module */
271 	iowrite32(reg_con, info->regs + NPCM_ADCCON);
272 
273 	/* Start ADC conversion */
274 	iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
275 
276 	platform_set_drvdata(pdev, indio_dev);
277 	indio_dev->name = dev_name(&pdev->dev);
278 	indio_dev->dev.parent = &pdev->dev;
279 	indio_dev->info = &npcm_adc_iio_info;
280 	indio_dev->modes = INDIO_DIRECT_MODE;
281 	indio_dev->channels = npcm_adc_iio_channels;
282 	indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
283 
284 	ret = iio_device_register(indio_dev);
285 	if (ret) {
286 		dev_err(&pdev->dev, "Couldn't register the device.\n");
287 		goto err_iio_register;
288 	}
289 
290 	pr_info("NPCM ADC driver probed\n");
291 
292 	return 0;
293 
294 err_iio_register:
295 	iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
296 	if (!IS_ERR(info->vref))
297 		regulator_disable(info->vref);
298 err_disable_clk:
299 	clk_disable_unprepare(info->adc_clk);
300 
301 	return ret;
302 }
303 
304 static int npcm_adc_remove(struct platform_device *pdev)
305 {
306 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
307 	struct npcm_adc *info = iio_priv(indio_dev);
308 	u32 regtemp;
309 
310 	iio_device_unregister(indio_dev);
311 
312 	regtemp = ioread32(info->regs + NPCM_ADCCON);
313 	iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
314 	if (!IS_ERR(info->vref))
315 		regulator_disable(info->vref);
316 	clk_disable_unprepare(info->adc_clk);
317 
318 	return 0;
319 }
320 
321 static struct platform_driver npcm_adc_driver = {
322 	.probe		= npcm_adc_probe,
323 	.remove		= npcm_adc_remove,
324 	.driver		= {
325 		.name	= "npcm_adc",
326 		.of_match_table = npcm_adc_match,
327 	},
328 };
329 
330 module_platform_driver(npcm_adc_driver);
331 
332 MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
333 MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
334 MODULE_LICENSE("GPL v2");
335