1 /* 2 * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved. 3 * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34 /* 35 * This file contains all of the code that is specific to the 36 * InfiniPath 7322 chip 37 */ 38 39 #include <linux/interrupt.h> 40 #include <linux/pci.h> 41 #include <linux/delay.h> 42 #include <linux/io.h> 43 #include <linux/jiffies.h> 44 #include <linux/module.h> 45 #include <rdma/ib_verbs.h> 46 #include <rdma/ib_smi.h> 47 #ifdef CONFIG_INFINIBAND_QIB_DCA 48 #include <linux/dca.h> 49 #endif 50 51 #include "qib.h" 52 #include "qib_7322_regs.h" 53 #include "qib_qsfp.h" 54 55 #include "qib_mad.h" 56 #include "qib_verbs.h" 57 58 #undef pr_fmt 59 #define pr_fmt(fmt) QIB_DRV_NAME " " fmt 60 61 static void qib_setup_7322_setextled(struct qib_pportdata *, u32); 62 static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); 63 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); 64 static irqreturn_t qib_7322intr(int irq, void *data); 65 static irqreturn_t qib_7322bufavail(int irq, void *data); 66 static irqreturn_t sdma_intr(int irq, void *data); 67 static irqreturn_t sdma_idle_intr(int irq, void *data); 68 static irqreturn_t sdma_progress_intr(int irq, void *data); 69 static irqreturn_t sdma_cleanup_intr(int irq, void *data); 70 static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, 71 struct qib_ctxtdata *rcd); 72 static u8 qib_7322_phys_portstate(u64); 73 static u32 qib_7322_iblink_state(u64); 74 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 75 u16 linitcmd); 76 static void force_h1(struct qib_pportdata *); 77 static void adj_tx_serdes(struct qib_pportdata *); 78 static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); 79 static void qib_7322_mini_pcs_reset(struct qib_pportdata *); 80 81 static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); 82 static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); 83 static void serdes_7322_los_enable(struct qib_pportdata *, int); 84 static int serdes_7322_init_old(struct qib_pportdata *); 85 static int serdes_7322_init_new(struct qib_pportdata *); 86 static void dump_sdma_7322_state(struct qib_pportdata *); 87 88 #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) 89 90 /* LE2 serdes values for different cases */ 91 #define LE2_DEFAULT 5 92 #define LE2_5m 4 93 #define LE2_QME 0 94 95 /* Below is special-purpose, so only really works for the IB SerDes blocks. */ 96 #define IBSD(hw_pidx) (hw_pidx + 2) 97 98 /* these are variables for documentation and experimentation purposes */ 99 static const unsigned rcv_int_timeout = 375; 100 static const unsigned rcv_int_count = 16; 101 static const unsigned sdma_idle_cnt = 64; 102 103 /* Time to stop altering Rx Equalization parameters, after link up. */ 104 #define RXEQ_DISABLE_MSECS 2500 105 106 /* 107 * Number of VLs we are configured to use (to allow for more 108 * credits per vl, etc.) 109 */ 110 ushort qib_num_cfg_vls = 2; 111 module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); 112 MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); 113 114 static ushort qib_chase = 1; 115 module_param_named(chase, qib_chase, ushort, S_IRUGO); 116 MODULE_PARM_DESC(chase, "Enable state chase handling"); 117 118 static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ 119 module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); 120 MODULE_PARM_DESC(long_attenuation, 121 "attenuation cutoff (dB) for long copper cable setup"); 122 123 static ushort qib_singleport; 124 module_param_named(singleport, qib_singleport, ushort, S_IRUGO); 125 MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); 126 127 static ushort qib_krcvq01_no_msi; 128 module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO); 129 MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2"); 130 131 /* 132 * Receive header queue sizes 133 */ 134 static unsigned qib_rcvhdrcnt; 135 module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO); 136 MODULE_PARM_DESC(rcvhdrcnt, "receive header count"); 137 138 static unsigned qib_rcvhdrsize; 139 module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO); 140 MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words"); 141 142 static unsigned qib_rcvhdrentsize; 143 module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO); 144 MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words"); 145 146 #define MAX_ATTEN_LEN 64 /* plenty for any real system */ 147 /* for read back, default index is ~5m copper cable */ 148 static char txselect_list[MAX_ATTEN_LEN] = "10"; 149 static struct kparam_string kp_txselect = { 150 .string = txselect_list, 151 .maxlen = MAX_ATTEN_LEN 152 }; 153 static int setup_txselect(const char *, const struct kernel_param *); 154 module_param_call(txselect, setup_txselect, param_get_string, 155 &kp_txselect, S_IWUSR | S_IRUGO); 156 MODULE_PARM_DESC(txselect, 157 "Tx serdes indices (for no QSFP or invalid QSFP data)"); 158 159 #define BOARD_QME7342 5 160 #define BOARD_QMH7342 6 161 #define BOARD_QMH7360 9 162 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 163 BOARD_QMH7342) 164 #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ 165 BOARD_QME7342) 166 167 #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) 168 169 #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) 170 171 #define MASK_ACROSS(lsb, msb) \ 172 (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) 173 174 #define SYM_RMASK(regname, fldname) ((u64) \ 175 QIB_7322_##regname##_##fldname##_RMASK) 176 177 #define SYM_MASK(regname, fldname) ((u64) \ 178 QIB_7322_##regname##_##fldname##_RMASK << \ 179 QIB_7322_##regname##_##fldname##_LSB) 180 181 #define SYM_FIELD(value, regname, fldname) ((u64) \ 182 (((value) >> SYM_LSB(regname, fldname)) & \ 183 SYM_RMASK(regname, fldname))) 184 185 /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ 186 #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ 187 (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) 188 189 #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) 190 #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) 191 #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) 192 #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) 193 #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) 194 /* Below because most, but not all, fields of IntMask have that full suffix */ 195 #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) 196 197 198 #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) 199 200 /* 201 * the size bits give us 2^N, in KB units. 0 marks as invalid, 202 * and 7 is reserved. We currently use only 2KB and 4KB 203 */ 204 #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB 205 #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */ 206 #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */ 207 #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ 208 209 #define SendIBSLIDAssignMask \ 210 QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK 211 #define SendIBSLMCMask \ 212 QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK 213 214 #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn) 215 #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn) 216 #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn) 217 #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn) 218 #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN) 219 #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN) 220 221 #define _QIB_GPIO_SDA_NUM 1 222 #define _QIB_GPIO_SCL_NUM 0 223 #define QIB_EEPROM_WEN_NUM 14 224 #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */ 225 226 /* HW counter clock is at 4nsec */ 227 #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000 228 229 /* full speed IB port 1 only */ 230 #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR) 231 #define PORT_SPD_CAP_SHIFT 3 232 233 /* full speed featuremask, both ports */ 234 #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT)) 235 236 /* 237 * This file contains almost all the chip-specific register information and 238 * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip. 239 */ 240 241 /* Use defines to tie machine-generated names to lower-case names */ 242 #define kr_contextcnt KREG_IDX(ContextCnt) 243 #define kr_control KREG_IDX(Control) 244 #define kr_counterregbase KREG_IDX(CntrRegBase) 245 #define kr_errclear KREG_IDX(ErrClear) 246 #define kr_errmask KREG_IDX(ErrMask) 247 #define kr_errstatus KREG_IDX(ErrStatus) 248 #define kr_extctrl KREG_IDX(EXTCtrl) 249 #define kr_extstatus KREG_IDX(EXTStatus) 250 #define kr_gpio_clear KREG_IDX(GPIOClear) 251 #define kr_gpio_mask KREG_IDX(GPIOMask) 252 #define kr_gpio_out KREG_IDX(GPIOOut) 253 #define kr_gpio_status KREG_IDX(GPIOStatus) 254 #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) 255 #define kr_debugportval KREG_IDX(DebugPortValueReg) 256 #define kr_fmask KREG_IDX(feature_mask) 257 #define kr_act_fmask KREG_IDX(active_feature_mask) 258 #define kr_hwerrclear KREG_IDX(HwErrClear) 259 #define kr_hwerrmask KREG_IDX(HwErrMask) 260 #define kr_hwerrstatus KREG_IDX(HwErrStatus) 261 #define kr_intclear KREG_IDX(IntClear) 262 #define kr_intmask KREG_IDX(IntMask) 263 #define kr_intredirect KREG_IDX(IntRedirect0) 264 #define kr_intstatus KREG_IDX(IntStatus) 265 #define kr_pagealign KREG_IDX(PageAlign) 266 #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0) 267 #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */ 268 #define kr_rcvegrbase KREG_IDX(RcvEgrBase) 269 #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) 270 #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) 271 #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) 272 #define kr_rcvhdrsize KREG_IDX(RcvHdrSize) 273 #define kr_rcvtidbase KREG_IDX(RcvTIDBase) 274 #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) 275 #define kr_revision KREG_IDX(Revision) 276 #define kr_scratch KREG_IDX(Scratch) 277 #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */ 278 #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */ 279 #define kr_sendctrl KREG_IDX(SendCtrl) 280 #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */ 281 #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */ 282 #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) 283 #define kr_sendpiobufbase KREG_IDX(SendBufBase) 284 #define kr_sendpiobufcnt KREG_IDX(SendBufCnt) 285 #define kr_sendpiosize KREG_IDX(SendBufSize) 286 #define kr_sendregbase KREG_IDX(SendRegBase) 287 #define kr_sendbufavail0 KREG_IDX(SendBufAvail0) 288 #define kr_userregbase KREG_IDX(UserRegBase) 289 #define kr_intgranted KREG_IDX(Int_Granted) 290 #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int) 291 #define kr_intblocked KREG_IDX(IntBlocked) 292 #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG) 293 294 /* 295 * per-port kernel registers. Access only with qib_read_kreg_port() 296 * or qib_write_kreg_port() 297 */ 298 #define krp_errclear KREG_IBPORT_IDX(ErrClear) 299 #define krp_errmask KREG_IBPORT_IDX(ErrMask) 300 #define krp_errstatus KREG_IBPORT_IDX(ErrStatus) 301 #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0) 302 #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit) 303 #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID) 304 #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig) 305 #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA) 306 #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB) 307 #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC) 308 #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA) 309 #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB) 310 #define krp_txestatus KREG_IBPORT_IDX(TXEStatus) 311 #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0) 312 #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl) 313 #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey) 314 #define krp_psinterval KREG_IBPORT_IDX(PSInterval) 315 #define krp_psstart KREG_IBPORT_IDX(PSStart) 316 #define krp_psstat KREG_IBPORT_IDX(PSStat) 317 #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP) 318 #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl) 319 #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt) 320 #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA) 321 #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0) 322 #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15) 323 #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl) 324 #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl) 325 #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase) 326 #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0) 327 #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1) 328 #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2) 329 #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0) 330 #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1) 331 #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2) 332 #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt) 333 #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead) 334 #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr) 335 #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt) 336 #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen) 337 #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld) 338 #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt) 339 #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus) 340 #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail) 341 #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom) 342 #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign) 343 #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask) 344 #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX) 345 #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD) 346 #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE) 347 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) 348 349 /* 350 * Per-context kernel registers. Access only with qib_read_kreg_ctxt() 351 * or qib_write_kreg_ctxt() 352 */ 353 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) 354 #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) 355 356 /* 357 * TID Flow table, per context. Reduces 358 * number of hdrq updates to one per flow (or on errors). 359 * context 0 and 1 share same memory, but have distinct 360 * addresses. Since for now, we never use expected sends 361 * on kernel contexts, we don't worry about that (we initialize 362 * those entries for ctxt 0/1 on driver load twice, for example). 363 */ 364 #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */ 365 #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0)) 366 367 /* these are the error bits in the tid flows, and are W1C */ 368 #define TIDFLOW_ERRBITS ( \ 369 (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \ 370 SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \ 371 (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \ 372 SYM_LSB(RcvTIDFlowTable0, SeqMismatch))) 373 374 /* Most (not all) Counters are per-IBport. 375 * Requires LBIntCnt is at offset 0 in the group 376 */ 377 #define CREG_IDX(regname) \ 378 ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 379 380 #define crp_badformat CREG_IDX(RxVersionErrCnt) 381 #define crp_err_rlen CREG_IDX(RxLenErrCnt) 382 #define crp_erricrc CREG_IDX(RxICRCErrCnt) 383 #define crp_errlink CREG_IDX(RxLinkMalformCnt) 384 #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt) 385 #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt) 386 #define crp_errvcrc CREG_IDX(RxVCRCErrCnt) 387 #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) 388 #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt) 389 #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) 390 #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt) 391 #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt) 392 #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) 393 #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) 394 #define crp_pktrcv CREG_IDX(RxDataPktCnt) 395 #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) 396 #define crp_pktsend CREG_IDX(TxDataPktCnt) 397 #define crp_pktsendflow CREG_IDX(TxFlowPktCnt) 398 #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount) 399 #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount) 400 #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount) 401 #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount) 402 #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount) 403 #define crp_rcvebp CREG_IDX(RxEBPCnt) 404 #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt) 405 #define crp_rcvovfl CREG_IDX(RxBufOvflCnt) 406 #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt) 407 #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt) 408 #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) 409 #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt) 410 #define crp_rxvlerr CREG_IDX(RxVlErrCnt) 411 #define crp_sendstall CREG_IDX(TxFlowStallCnt) 412 #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt) 413 #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt) 414 #define crp_txlenerr CREG_IDX(TxLenErrCnt) 415 #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt) 416 #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt) 417 #define crp_txunderrun CREG_IDX(TxUnderrunCnt) 418 #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt) 419 #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) 420 #define crp_wordrcv CREG_IDX(RxDwordCnt) 421 #define crp_wordsend CREG_IDX(TxDwordCnt) 422 #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut) 423 424 /* these are the (few) counters that are not port-specific */ 425 #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \ 426 QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) 427 #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt) 428 #define cr_lbint CREG_DEVIDX(LBIntCnt) 429 #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt) 430 #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt) 431 #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt) 432 #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt) 433 #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt) 434 435 /* no chip register for # of IB ports supported, so define */ 436 #define NUM_IB_PORTS 2 437 438 /* 1 VL15 buffer per hardware IB port, no register for this, so define */ 439 #define NUM_VL15_BUFS NUM_IB_PORTS 440 441 /* 442 * context 0 and 1 are special, and there is no chip register that 443 * defines this value, so we have to define it here. 444 * These are all allocated to either 0 or 1 for single port 445 * hardware configuration, otherwise each gets half 446 */ 447 #define KCTXT0_EGRCNT 2048 448 449 /* values for vl and port fields in PBC, 7322-specific */ 450 #define PBC_PORT_SEL_LSB 26 451 #define PBC_PORT_SEL_RMASK 1 452 #define PBC_VL_NUM_LSB 27 453 #define PBC_VL_NUM_RMASK 7 454 #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ 455 #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ 456 457 static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { 458 [IB_RATE_2_5_GBPS] = 16, 459 [IB_RATE_5_GBPS] = 8, 460 [IB_RATE_10_GBPS] = 4, 461 [IB_RATE_20_GBPS] = 2, 462 [IB_RATE_30_GBPS] = 2, 463 [IB_RATE_40_GBPS] = 1 464 }; 465 466 static const char * const qib_sdma_state_names[] = { 467 [qib_sdma_state_s00_hw_down] = "s00_HwDown", 468 [qib_sdma_state_s10_hw_start_up_wait] = "s10_HwStartUpWait", 469 [qib_sdma_state_s20_idle] = "s20_Idle", 470 [qib_sdma_state_s30_sw_clean_up_wait] = "s30_SwCleanUpWait", 471 [qib_sdma_state_s40_hw_clean_up_wait] = "s40_HwCleanUpWait", 472 [qib_sdma_state_s50_hw_halt_wait] = "s50_HwHaltWait", 473 [qib_sdma_state_s99_running] = "s99_Running", 474 }; 475 476 #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive) 477 #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive) 478 479 /* link training states, from IBC */ 480 #define IB_7322_LT_STATE_DISABLED 0x00 481 #define IB_7322_LT_STATE_LINKUP 0x01 482 #define IB_7322_LT_STATE_POLLACTIVE 0x02 483 #define IB_7322_LT_STATE_POLLQUIET 0x03 484 #define IB_7322_LT_STATE_SLEEPDELAY 0x04 485 #define IB_7322_LT_STATE_SLEEPQUIET 0x05 486 #define IB_7322_LT_STATE_CFGDEBOUNCE 0x08 487 #define IB_7322_LT_STATE_CFGRCVFCFG 0x09 488 #define IB_7322_LT_STATE_CFGWAITRMT 0x0a 489 #define IB_7322_LT_STATE_CFGIDLE 0x0b 490 #define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c 491 #define IB_7322_LT_STATE_TXREVLANES 0x0d 492 #define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e 493 #define IB_7322_LT_STATE_RECOVERIDLE 0x0f 494 #define IB_7322_LT_STATE_CFGENH 0x10 495 #define IB_7322_LT_STATE_CFGTEST 0x11 496 #define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 497 #define IB_7322_LT_STATE_CFGWAITENH 0x13 498 499 /* link state machine states from IBC */ 500 #define IB_7322_L_STATE_DOWN 0x0 501 #define IB_7322_L_STATE_INIT 0x1 502 #define IB_7322_L_STATE_ARM 0x2 503 #define IB_7322_L_STATE_ACTIVE 0x3 504 #define IB_7322_L_STATE_ACT_DEFER 0x4 505 506 static const u8 qib_7322_physportstate[0x20] = { 507 [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, 508 [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, 509 [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, 510 [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, 511 [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, 512 [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, 513 [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, 514 [IB_7322_LT_STATE_CFGRCVFCFG] = 515 IB_PHYSPORTSTATE_CFG_TRAIN, 516 [IB_7322_LT_STATE_CFGWAITRMT] = 517 IB_PHYSPORTSTATE_CFG_TRAIN, 518 [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE, 519 [IB_7322_LT_STATE_RECOVERRETRAIN] = 520 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 521 [IB_7322_LT_STATE_RECOVERWAITRMT] = 522 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 523 [IB_7322_LT_STATE_RECOVERIDLE] = 524 IB_PHYSPORTSTATE_LINK_ERR_RECOVER, 525 [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, 526 [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, 527 [IB_7322_LT_STATE_CFGWAITRMTTEST] = 528 IB_PHYSPORTSTATE_CFG_TRAIN, 529 [IB_7322_LT_STATE_CFGWAITENH] = 530 IB_PHYSPORTSTATE_CFG_WAIT_ENH, 531 [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, 532 [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, 533 [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, 534 [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN 535 }; 536 537 #ifdef CONFIG_INFINIBAND_QIB_DCA 538 struct qib_irq_notify { 539 int rcv; 540 void *arg; 541 struct irq_affinity_notify notify; 542 }; 543 #endif 544 545 struct qib_chip_specific { 546 u64 __iomem *cregbase; 547 u64 *cntrs; 548 spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ 549 spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ 550 u64 main_int_mask; /* clear bits which have dedicated handlers */ 551 u64 int_enable_mask; /* for per port interrupts in single port mode */ 552 u64 errormask; 553 u64 hwerrmask; 554 u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ 555 u64 gpio_mask; /* shadow the gpio mask register */ 556 u64 extctrl; /* shadow the gpio output enable, etc... */ 557 u32 ncntrs; 558 u32 nportcntrs; 559 u32 cntrnamelen; 560 u32 portcntrnamelen; 561 u32 numctxts; 562 u32 rcvegrcnt; 563 u32 updthresh; /* current AvailUpdThld */ 564 u32 updthresh_dflt; /* default AvailUpdThld */ 565 u32 r1; 566 u32 num_msix_entries; 567 u32 sdmabufcnt; 568 u32 lastbuf_for_pio; 569 u32 stay_in_freeze; 570 u32 recovery_ports_initted; 571 #ifdef CONFIG_INFINIBAND_QIB_DCA 572 u32 dca_ctrl; 573 int rhdr_cpu[18]; 574 int sdma_cpu[2]; 575 u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */ 576 #endif 577 struct qib_msix_entry *msix_entries; 578 unsigned long *sendchkenable; 579 unsigned long *sendgrhchk; 580 unsigned long *sendibchk; 581 u32 rcvavail_timeout[18]; 582 char emsgbuf[128]; /* for device error interrupt msg buffer */ 583 }; 584 585 /* Table of entries in "human readable" form Tx Emphasis. */ 586 struct txdds_ent { 587 u8 amp; 588 u8 pre; 589 u8 main; 590 u8 post; 591 }; 592 593 struct vendor_txdds_ent { 594 u8 oui[QSFP_VOUI_LEN]; 595 u8 *partnum; 596 struct txdds_ent sdr; 597 struct txdds_ent ddr; 598 struct txdds_ent qdr; 599 }; 600 601 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); 602 603 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ 604 #define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */ 605 #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */ 606 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ 607 608 #define H1_FORCE_VAL 8 609 #define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ 610 #define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ 611 612 /* The static and dynamic registers are paired, and the pairs indexed by spd */ 613 #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ 614 + ((spd) * 2)) 615 616 #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */ 617 #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */ 618 #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */ 619 #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ 620 #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ 621 622 struct qib_chippport_specific { 623 u64 __iomem *kpregbase; 624 u64 __iomem *cpregbase; 625 u64 *portcntrs; 626 struct qib_pportdata *ppd; 627 wait_queue_head_t autoneg_wait; 628 struct delayed_work autoneg_work; 629 struct delayed_work ipg_work; 630 struct timer_list chase_timer; 631 /* 632 * these 5 fields are used to establish deltas for IB symbol 633 * errors and linkrecovery errors. They can be reported on 634 * some chips during link negotiation prior to INIT, and with 635 * DDR when faking DDR negotiations with non-IBTA switches. 636 * The chip counters are adjusted at driver unload if there is 637 * a non-zero delta. 638 */ 639 u64 ibdeltainprog; 640 u64 ibsymdelta; 641 u64 ibsymsnap; 642 u64 iblnkerrdelta; 643 u64 iblnkerrsnap; 644 u64 iblnkdownsnap; 645 u64 iblnkdowndelta; 646 u64 ibmalfdelta; 647 u64 ibmalfsnap; 648 u64 ibcctrl_a; /* krp_ibcctrl_a shadow */ 649 u64 ibcctrl_b; /* krp_ibcctrl_b shadow */ 650 unsigned long qdr_dfe_time; 651 unsigned long chase_end; 652 u32 autoneg_tries; 653 u32 recovery_init; 654 u32 qdr_dfe_on; 655 u32 qdr_reforce; 656 /* 657 * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. 658 * entry zero is unused, to simplify indexing 659 */ 660 u8 h1_val; 661 u8 no_eep; /* txselect table index to use if no qsfp info */ 662 u8 ipg_tries; 663 u8 ibmalfusesnap; 664 struct qib_qsfp_data qsfp_data; 665 char epmsgbuf[192]; /* for port error interrupt msg buffer */ 666 char sdmamsgbuf[192]; /* for per-port sdma error messages */ 667 }; 668 669 static struct { 670 const char *name; 671 irq_handler_t handler; 672 int lsb; 673 int port; /* 0 if not port-specific, else port # */ 674 int dca; 675 } irq_table[] = { 676 { "", qib_7322intr, -1, 0, 0 }, 677 { " (buf avail)", qib_7322bufavail, 678 SYM_LSB(IntStatus, SendBufAvail), 0, 0}, 679 { " (sdma 0)", sdma_intr, 680 SYM_LSB(IntStatus, SDmaInt_0), 1, 1 }, 681 { " (sdma 1)", sdma_intr, 682 SYM_LSB(IntStatus, SDmaInt_1), 2, 1 }, 683 { " (sdmaI 0)", sdma_idle_intr, 684 SYM_LSB(IntStatus, SDmaIdleInt_0), 1, 1}, 685 { " (sdmaI 1)", sdma_idle_intr, 686 SYM_LSB(IntStatus, SDmaIdleInt_1), 2, 1}, 687 { " (sdmaP 0)", sdma_progress_intr, 688 SYM_LSB(IntStatus, SDmaProgressInt_0), 1, 1 }, 689 { " (sdmaP 1)", sdma_progress_intr, 690 SYM_LSB(IntStatus, SDmaProgressInt_1), 2, 1 }, 691 { " (sdmaC 0)", sdma_cleanup_intr, 692 SYM_LSB(IntStatus, SDmaCleanupDone_0), 1, 0 }, 693 { " (sdmaC 1)", sdma_cleanup_intr, 694 SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 , 0}, 695 }; 696 697 #ifdef CONFIG_INFINIBAND_QIB_DCA 698 699 static const struct dca_reg_map { 700 int shadow_inx; 701 int lsb; 702 u64 mask; 703 u16 regno; 704 } dca_rcvhdr_reg_map[] = { 705 { 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH), 706 ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) }, 707 { 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH), 708 ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) }, 709 { 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH), 710 ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) }, 711 { 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH), 712 ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) }, 713 { 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH), 714 ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) }, 715 { 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH), 716 ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) }, 717 { 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH), 718 ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) }, 719 { 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH), 720 ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) }, 721 { 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH), 722 ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) }, 723 { 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH), 724 ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) }, 725 { 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH), 726 ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) }, 727 { 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH), 728 ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) }, 729 { 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH), 730 ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) }, 731 { 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH), 732 ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) }, 733 { 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH), 734 ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) }, 735 { 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH), 736 ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) }, 737 { 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH), 738 ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) }, 739 { 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH), 740 ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) }, 741 }; 742 #endif 743 744 /* ibcctrl bits */ 745 #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 746 /* cycle through TS1/TS2 till OK */ 747 #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 748 /* wait for TS1, then go on */ 749 #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 750 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 751 752 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ 753 #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ 754 #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ 755 756 #define BLOB_7322_IBCHG 0x101 757 758 static inline void qib_write_kreg(const struct qib_devdata *dd, 759 const u32 regno, u64 value); 760 static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32); 761 static void write_7322_initregs(struct qib_devdata *); 762 static void write_7322_init_portregs(struct qib_pportdata *); 763 static void setup_7322_link_recovery(struct qib_pportdata *, u32); 764 static void check_7322_rxe_status(struct qib_pportdata *); 765 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *); 766 #ifdef CONFIG_INFINIBAND_QIB_DCA 767 static void qib_setup_dca(struct qib_devdata *dd); 768 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum); 769 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum); 770 #endif 771 772 /** 773 * qib_read_ureg32 - read 32-bit virtualized per-context register 774 * @dd: device 775 * @regno: register number 776 * @ctxt: context number 777 * 778 * Return the contents of a register that is virtualized to be per context. 779 * Returns -1 on errors (not distinguishable from valid contents at 780 * runtime; we may add a separate error variable at some point). 781 */ 782 static inline u32 qib_read_ureg32(const struct qib_devdata *dd, 783 enum qib_ureg regno, int ctxt) 784 { 785 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 786 return 0; 787 return readl(regno + (u64 __iomem *)( 788 (dd->ureg_align * ctxt) + (dd->userbase ? 789 (char __iomem *)dd->userbase : 790 (char __iomem *)dd->kregbase + dd->uregbase))); 791 } 792 793 /** 794 * qib_read_ureg - read virtualized per-context register 795 * @dd: device 796 * @regno: register number 797 * @ctxt: context number 798 * 799 * Return the contents of a register that is virtualized to be per context. 800 * Returns -1 on errors (not distinguishable from valid contents at 801 * runtime; we may add a separate error variable at some point). 802 */ 803 static inline u64 qib_read_ureg(const struct qib_devdata *dd, 804 enum qib_ureg regno, int ctxt) 805 { 806 807 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 808 return 0; 809 return readq(regno + (u64 __iomem *)( 810 (dd->ureg_align * ctxt) + (dd->userbase ? 811 (char __iomem *)dd->userbase : 812 (char __iomem *)dd->kregbase + dd->uregbase))); 813 } 814 815 /** 816 * qib_write_ureg - write virtualized per-context register 817 * @dd: device 818 * @regno: register number 819 * @value: value 820 * @ctxt: context 821 * 822 * Write the contents of a register that is virtualized to be per context. 823 */ 824 static inline void qib_write_ureg(const struct qib_devdata *dd, 825 enum qib_ureg regno, u64 value, int ctxt) 826 { 827 u64 __iomem *ubase; 828 829 if (dd->userbase) 830 ubase = (u64 __iomem *) 831 ((char __iomem *) dd->userbase + 832 dd->ureg_align * ctxt); 833 else 834 ubase = (u64 __iomem *) 835 (dd->uregbase + 836 (char __iomem *) dd->kregbase + 837 dd->ureg_align * ctxt); 838 839 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 840 writeq(value, &ubase[regno]); 841 } 842 843 static inline u32 qib_read_kreg32(const struct qib_devdata *dd, 844 const u32 regno) 845 { 846 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 847 return -1; 848 return readl((u32 __iomem *) &dd->kregbase[regno]); 849 } 850 851 static inline u64 qib_read_kreg64(const struct qib_devdata *dd, 852 const u32 regno) 853 { 854 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) 855 return -1; 856 return readq(&dd->kregbase[regno]); 857 } 858 859 static inline void qib_write_kreg(const struct qib_devdata *dd, 860 const u32 regno, u64 value) 861 { 862 if (dd->kregbase && (dd->flags & QIB_PRESENT)) 863 writeq(value, &dd->kregbase[regno]); 864 } 865 866 /* 867 * not many sanity checks for the port-specific kernel register routines, 868 * since they are only used when it's known to be safe. 869 */ 870 static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, 871 const u16 regno) 872 { 873 if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) 874 return 0ULL; 875 return readq(&ppd->cpspec->kpregbase[regno]); 876 } 877 878 static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, 879 const u16 regno, u64 value) 880 { 881 if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && 882 (ppd->dd->flags & QIB_PRESENT)) 883 writeq(value, &ppd->cpspec->kpregbase[regno]); 884 } 885 886 /** 887 * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register 888 * @dd: the qlogic_ib device 889 * @regno: the register number to write 890 * @ctxt: the context containing the register 891 * @value: the value to write 892 */ 893 static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, 894 const u16 regno, unsigned ctxt, 895 u64 value) 896 { 897 qib_write_kreg(dd, regno + ctxt, value); 898 } 899 900 static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) 901 { 902 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 903 return 0; 904 return readq(&dd->cspec->cregbase[regno]); 905 906 907 } 908 909 static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) 910 { 911 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) 912 return 0; 913 return readl(&dd->cspec->cregbase[regno]); 914 915 916 } 917 918 static inline void write_7322_creg_port(const struct qib_pportdata *ppd, 919 u16 regno, u64 value) 920 { 921 if (ppd->cpspec && ppd->cpspec->cpregbase && 922 (ppd->dd->flags & QIB_PRESENT)) 923 writeq(value, &ppd->cpspec->cpregbase[regno]); 924 } 925 926 static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, 927 u16 regno) 928 { 929 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 930 !(ppd->dd->flags & QIB_PRESENT)) 931 return 0; 932 return readq(&ppd->cpspec->cpregbase[regno]); 933 } 934 935 static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, 936 u16 regno) 937 { 938 if (!ppd->cpspec || !ppd->cpspec->cpregbase || 939 !(ppd->dd->flags & QIB_PRESENT)) 940 return 0; 941 return readl(&ppd->cpspec->cpregbase[regno]); 942 } 943 944 /* bits in Control register */ 945 #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) 946 #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) 947 948 /* bits in general interrupt regs */ 949 #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) 950 #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) 951 #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) 952 #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) 953 #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) 954 #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) 955 #define QIB_I_C_ERROR INT_MASK(Err) 956 957 #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) 958 #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) 959 #define QIB_I_GPIO INT_MASK(AssertGPIO) 960 #define QIB_I_P_SDMAINT(pidx) \ 961 (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 962 INT_MASK_P(SDmaProgress, pidx) | \ 963 INT_MASK_PM(SDmaCleanupDone, pidx)) 964 965 /* Interrupt bits that are "per port" */ 966 #define QIB_I_P_BITSEXTANT(pidx) \ 967 (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ 968 INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ 969 INT_MASK_P(SDmaProgress, pidx) | \ 970 INT_MASK_PM(SDmaCleanupDone, pidx)) 971 972 /* Interrupt bits that are common to a device */ 973 /* currently unused: QIB_I_SPIOSENT */ 974 #define QIB_I_C_BITSEXTANT \ 975 (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ 976 QIB_I_SPIOSENT | \ 977 QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) 978 979 #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ 980 QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) 981 982 /* 983 * Error bits that are "per port". 984 */ 985 #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) 986 #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) 987 #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) 988 #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) 989 #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) 990 #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) 991 #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) 992 #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) 993 #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) 994 #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) 995 #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) 996 #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) 997 #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) 998 #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) 999 #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) 1000 #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) 1001 #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) 1002 #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) 1003 #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) 1004 #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) 1005 #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) 1006 #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) 1007 #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) 1008 #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) 1009 #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) 1010 #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) 1011 #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) 1012 #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) 1013 1014 #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) 1015 #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) 1016 #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) 1017 #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) 1018 #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) 1019 #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) 1020 #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) 1021 #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) 1022 #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) 1023 #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) 1024 #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) 1025 1026 /* Error bits that are common to a device */ 1027 #define QIB_E_RESET ERR_MASK(ResetNegated) 1028 #define QIB_E_HARDWARE ERR_MASK(HardwareErr) 1029 #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) 1030 1031 1032 /* 1033 * Per chip (rather than per-port) errors. Most either do 1034 * nothing but trigger a print (because they self-recover, or 1035 * always occur in tandem with other errors that handle the 1036 * issue), or because they indicate errors with no recovery, 1037 * but we want to know that they happened. 1038 */ 1039 #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) 1040 #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) 1041 #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) 1042 #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) 1043 #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) 1044 #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) 1045 #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) 1046 #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) 1047 1048 /* SDMA chip errors (not per port) 1049 * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get 1050 * the SDMAHALT error immediately, so we just print the dup error via the 1051 * E_AUTO mechanism. This is true of most of the per-port fatal errors 1052 * as well, but since this is port-independent, by definition, it's 1053 * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per 1054 * packet send errors, and so are handled in the same manner as other 1055 * per-packet errors. 1056 */ 1057 #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) 1058 #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) 1059 #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) 1060 1061 /* 1062 * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS 1063 * it is used to print "common" packet errors. 1064 */ 1065 #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ 1066 QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ 1067 QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ 1068 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1069 QIB_E_P_REBP) 1070 1071 /* Error Bits that Packet-related (Receive, per-port) */ 1072 #define QIB_E_P_RPKTERRS (\ 1073 QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ 1074 QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ 1075 QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ 1076 QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ 1077 QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ 1078 QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) 1079 1080 /* 1081 * Error bits that are Send-related (per port) 1082 * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). 1083 * All of these potentially need to have a buffer disarmed 1084 */ 1085 #define QIB_E_P_SPKTERRS (\ 1086 QIB_E_P_SUNEXP_PKTNUM |\ 1087 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1088 QIB_E_P_SMAXPKTLEN |\ 1089 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ 1090 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ 1091 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) 1092 1093 #define QIB_E_SPKTERRS ( \ 1094 QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ 1095 ERR_MASK_N(SendUnsupportedVLErr) | \ 1096 QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) 1097 1098 #define QIB_E_P_SDMAERRS ( \ 1099 QIB_E_P_SDMAHALT | \ 1100 QIB_E_P_SDMADESCADDRMISALIGN | \ 1101 QIB_E_P_SDMAUNEXPDATA | \ 1102 QIB_E_P_SDMAMISSINGDW | \ 1103 QIB_E_P_SDMADWEN | \ 1104 QIB_E_P_SDMARPYTAG | \ 1105 QIB_E_P_SDMA1STDESC | \ 1106 QIB_E_P_SDMABASE | \ 1107 QIB_E_P_SDMATAILOUTOFBOUND | \ 1108 QIB_E_P_SDMAOUTOFBOUND | \ 1109 QIB_E_P_SDMAGENMISMATCH) 1110 1111 /* 1112 * This sets some bits more than once, but makes it more obvious which 1113 * bits are not handled under other categories, and the repeat definition 1114 * is not a problem. 1115 */ 1116 #define QIB_E_P_BITSEXTANT ( \ 1117 QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ 1118 QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ 1119 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ 1120 QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ 1121 ) 1122 1123 /* 1124 * These are errors that can occur when the link 1125 * changes state while a packet is being sent or received. This doesn't 1126 * cover things like EBP or VCRC that can be the result of a sending 1127 * having the link change state, so we receive a "known bad" packet. 1128 * All of these are "per port", so renamed: 1129 */ 1130 #define QIB_E_P_LINK_PKTERRS (\ 1131 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ 1132 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ 1133 QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ 1134 QIB_E_P_RUNEXPCHAR) 1135 1136 /* 1137 * This sets some bits more than once, but makes it more obvious which 1138 * bits are not handled under other categories (such as QIB_E_SPKTERRS), 1139 * and the repeat definition is not a problem. 1140 */ 1141 #define QIB_E_C_BITSEXTANT (\ 1142 QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ 1143 QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ 1144 QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) 1145 1146 /* Likewise Neuter E_SPKT_ERRS_IGNORE */ 1147 #define E_SPKT_ERRS_IGNORE 0 1148 1149 #define QIB_EXTS_MEMBIST_DISABLED \ 1150 SYM_MASK(EXTStatus, MemBISTDisabled) 1151 #define QIB_EXTS_MEMBIST_ENDTEST \ 1152 SYM_MASK(EXTStatus, MemBISTEndTest) 1153 1154 #define QIB_E_SPIOARMLAUNCH \ 1155 ERR_MASK(SendArmLaunchErr) 1156 1157 #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) 1158 #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) 1159 1160 /* 1161 * IBTA_1_2 is set when multiple speeds are enabled (normal), 1162 * and also if forced QDR (only QDR enabled). It's enabled for the 1163 * forced QDR case so that scrambling will be enabled by the TS3 1164 * exchange, when supported by both sides of the link. 1165 */ 1166 #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) 1167 #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) 1168 #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) 1169 #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) 1170 #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) 1171 #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ 1172 SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) 1173 #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) 1174 1175 #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) 1176 #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) 1177 1178 #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) 1179 #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1180 #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) 1181 1182 #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1183 #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP) 1184 #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \ 1185 SYM_MASK(IBCCtrlB_0, HRTBT_ENB)) 1186 #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \ 1187 SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) 1188 #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) 1189 1190 #define IBA7322_REDIRECT_VEC_PER_REG 12 1191 1192 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) 1193 #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) 1194 #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) 1195 #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) 1196 #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) 1197 1198 #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ 1199 1200 #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ 1201 .msg = #fldname , .sz = sizeof(#fldname) } 1202 #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ 1203 fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) } 1204 static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { 1205 HWE_AUTO_P(IBSerdesPClkNotDetect, 1), 1206 HWE_AUTO_P(IBSerdesPClkNotDetect, 0), 1207 HWE_AUTO(PCIESerdesPClkNotDetect), 1208 HWE_AUTO(PowerOnBISTFailed), 1209 HWE_AUTO(TempsenseTholdReached), 1210 HWE_AUTO(MemoryErr), 1211 HWE_AUTO(PCIeBusParityErr), 1212 HWE_AUTO(PcieCplTimeout), 1213 HWE_AUTO(PciePoisonedTLP), 1214 HWE_AUTO_P(SDmaMemReadErr, 1), 1215 HWE_AUTO_P(SDmaMemReadErr, 0), 1216 HWE_AUTO_P(IBCBusFromSPCParityErr, 1), 1217 HWE_AUTO_P(IBCBusToSPCParityErr, 1), 1218 HWE_AUTO_P(IBCBusFromSPCParityErr, 0), 1219 HWE_AUTO(statusValidNoEop), 1220 HWE_AUTO(LATriggered), 1221 { .mask = 0, .sz = 0 } 1222 }; 1223 1224 #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ 1225 .msg = #fldname, .sz = sizeof(#fldname) } 1226 #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ 1227 .msg = #fldname, .sz = sizeof(#fldname) } 1228 static const struct qib_hwerror_msgs qib_7322error_msgs[] = { 1229 E_AUTO(RcvEgrFullErr), 1230 E_AUTO(RcvHdrFullErr), 1231 E_AUTO(ResetNegated), 1232 E_AUTO(HardwareErr), 1233 E_AUTO(InvalidAddrErr), 1234 E_AUTO(SDmaVL15Err), 1235 E_AUTO(SBufVL15MisUseErr), 1236 E_AUTO(InvalidEEPCmd), 1237 E_AUTO(RcvContextShareErr), 1238 E_AUTO(SendVLMismatchErr), 1239 E_AUTO(SendArmLaunchErr), 1240 E_AUTO(SendSpecialTriggerErr), 1241 E_AUTO(SDmaWrongPortErr), 1242 E_AUTO(SDmaBufMaskDuplicateErr), 1243 { .mask = 0, .sz = 0 } 1244 }; 1245 1246 static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { 1247 E_P_AUTO(IBStatusChanged), 1248 E_P_AUTO(SHeadersErr), 1249 E_P_AUTO(VL15BufMisuseErr), 1250 /* 1251 * SDmaHaltErr is not really an error, make it clearer; 1252 */ 1253 {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted", 1254 .sz = 11}, 1255 E_P_AUTO(SDmaDescAddrMisalignErr), 1256 E_P_AUTO(SDmaUnexpDataErr), 1257 E_P_AUTO(SDmaMissingDwErr), 1258 E_P_AUTO(SDmaDwEnErr), 1259 E_P_AUTO(SDmaRpyTagErr), 1260 E_P_AUTO(SDma1stDescErr), 1261 E_P_AUTO(SDmaBaseErr), 1262 E_P_AUTO(SDmaTailOutOfBoundErr), 1263 E_P_AUTO(SDmaOutOfBoundErr), 1264 E_P_AUTO(SDmaGenMismatchErr), 1265 E_P_AUTO(SendBufMisuseErr), 1266 E_P_AUTO(SendUnsupportedVLErr), 1267 E_P_AUTO(SendUnexpectedPktNumErr), 1268 E_P_AUTO(SendDroppedDataPktErr), 1269 E_P_AUTO(SendDroppedSmpPktErr), 1270 E_P_AUTO(SendPktLenErr), 1271 E_P_AUTO(SendUnderRunErr), 1272 E_P_AUTO(SendMaxPktLenErr), 1273 E_P_AUTO(SendMinPktLenErr), 1274 E_P_AUTO(RcvIBLostLinkErr), 1275 E_P_AUTO(RcvHdrErr), 1276 E_P_AUTO(RcvHdrLenErr), 1277 E_P_AUTO(RcvBadTidErr), 1278 E_P_AUTO(RcvBadVersionErr), 1279 E_P_AUTO(RcvIBFlowErr), 1280 E_P_AUTO(RcvEBPErr), 1281 E_P_AUTO(RcvUnsupportedVLErr), 1282 E_P_AUTO(RcvUnexpectedCharErr), 1283 E_P_AUTO(RcvShortPktLenErr), 1284 E_P_AUTO(RcvLongPktLenErr), 1285 E_P_AUTO(RcvMaxPktLenErr), 1286 E_P_AUTO(RcvMinPktLenErr), 1287 E_P_AUTO(RcvICRCErr), 1288 E_P_AUTO(RcvVCRCErr), 1289 E_P_AUTO(RcvFormatErr), 1290 { .mask = 0, .sz = 0 } 1291 }; 1292 1293 /* 1294 * Below generates "auto-message" for interrupts not specific to any port or 1295 * context 1296 */ 1297 #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ 1298 .msg = #fldname, .sz = sizeof(#fldname) } 1299 /* Below generates "auto-message" for interrupts specific to a port */ 1300 #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ 1301 SYM_LSB(IntMask, fldname##Mask##_0), \ 1302 SYM_LSB(IntMask, fldname##Mask##_1)), \ 1303 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1304 /* For some reason, the SerDesTrimDone bits are reversed */ 1305 #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ 1306 SYM_LSB(IntMask, fldname##Mask##_1), \ 1307 SYM_LSB(IntMask, fldname##Mask##_0)), \ 1308 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } 1309 /* 1310 * Below generates "auto-message" for interrupts specific to a context, 1311 * with ctxt-number appended 1312 */ 1313 #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ 1314 SYM_LSB(IntMask, fldname##0IntMask), \ 1315 SYM_LSB(IntMask, fldname##17IntMask)), \ 1316 .msg = #fldname "_C", .sz = sizeof(#fldname "_C") } 1317 1318 #define TXSYMPTOM_AUTO_P(fldname) \ 1319 { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \ 1320 .msg = #fldname, .sz = sizeof(#fldname) } 1321 static const struct qib_hwerror_msgs hdrchk_msgs[] = { 1322 TXSYMPTOM_AUTO_P(NonKeyPacket), 1323 TXSYMPTOM_AUTO_P(GRHFail), 1324 TXSYMPTOM_AUTO_P(PkeyFail), 1325 TXSYMPTOM_AUTO_P(QPFail), 1326 TXSYMPTOM_AUTO_P(SLIDFail), 1327 TXSYMPTOM_AUTO_P(RawIPV6), 1328 TXSYMPTOM_AUTO_P(PacketTooSmall), 1329 { .mask = 0, .sz = 0 } 1330 }; 1331 1332 #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ 1333 1334 /* 1335 * Called when we might have an error that is specific to a particular 1336 * PIO buffer, and may need to cancel that buffer, so it can be re-used, 1337 * because we don't need to force the update of pioavail 1338 */ 1339 static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) 1340 { 1341 struct qib_devdata *dd = ppd->dd; 1342 u32 i; 1343 int any; 1344 u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 1345 u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; 1346 unsigned long sbuf[4]; 1347 1348 /* 1349 * It's possible that sendbuffererror could have bits set; might 1350 * have already done this as a result of hardware error handling. 1351 */ 1352 any = 0; 1353 for (i = 0; i < regcnt; ++i) { 1354 sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); 1355 if (sbuf[i]) { 1356 any = 1; 1357 qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); 1358 } 1359 } 1360 1361 if (any) 1362 qib_disarm_piobufs_set(dd, sbuf, piobcnt); 1363 } 1364 1365 /* No txe_recover yet, if ever */ 1366 1367 /* No decode__errors yet */ 1368 static void err_decode(char *msg, size_t len, u64 errs, 1369 const struct qib_hwerror_msgs *msp) 1370 { 1371 u64 these, lmask; 1372 int took, multi, n = 0; 1373 1374 while (errs && msp && msp->mask) { 1375 multi = (msp->mask & (msp->mask - 1)); 1376 while (errs & msp->mask) { 1377 these = (errs & msp->mask); 1378 lmask = (these & (these - 1)) ^ these; 1379 if (len) { 1380 if (n++) { 1381 /* separate the strings */ 1382 *msg++ = ','; 1383 len--; 1384 } 1385 /* msp->sz counts the nul */ 1386 took = min_t(size_t, msp->sz - (size_t)1, len); 1387 memcpy(msg, msp->msg, took); 1388 len -= took; 1389 msg += took; 1390 if (len) 1391 *msg = '\0'; 1392 } 1393 errs &= ~lmask; 1394 if (len && multi) { 1395 /* More than one bit this mask */ 1396 int idx = -1; 1397 1398 while (lmask & msp->mask) { 1399 ++idx; 1400 lmask >>= 1; 1401 } 1402 took = scnprintf(msg, len, "_%d", idx); 1403 len -= took; 1404 msg += took; 1405 } 1406 } 1407 ++msp; 1408 } 1409 /* If some bits are left, show in hex. */ 1410 if (len && errs) 1411 snprintf(msg, len, "%sMORE:%llX", n ? "," : "", 1412 (unsigned long long) errs); 1413 } 1414 1415 /* only called if r1 set */ 1416 static void flush_fifo(struct qib_pportdata *ppd) 1417 { 1418 struct qib_devdata *dd = ppd->dd; 1419 u32 __iomem *piobuf; 1420 u32 bufn; 1421 u32 *hdr; 1422 u64 pbc; 1423 const unsigned hdrwords = 7; 1424 static struct ib_header ibhdr = { 1425 .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), 1426 .lrh[1] = IB_LID_PERMISSIVE, 1427 .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), 1428 .lrh[3] = IB_LID_PERMISSIVE, 1429 .u.oth.bth[0] = cpu_to_be32( 1430 (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), 1431 .u.oth.bth[1] = cpu_to_be32(0), 1432 .u.oth.bth[2] = cpu_to_be32(0), 1433 .u.oth.u.ud.deth[0] = cpu_to_be32(0), 1434 .u.oth.u.ud.deth[1] = cpu_to_be32(0), 1435 }; 1436 1437 /* 1438 * Send a dummy VL15 packet to flush the launch FIFO. 1439 * This will not actually be sent since the TxeBypassIbc bit is set. 1440 */ 1441 pbc = PBC_7322_VL15_SEND | 1442 (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | 1443 (hdrwords + SIZE_OF_CRC); 1444 piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); 1445 if (!piobuf) 1446 return; 1447 writeq(pbc, piobuf); 1448 hdr = (u32 *) &ibhdr; 1449 if (dd->flags & QIB_PIO_FLUSH_WC) { 1450 qib_flush_wc(); 1451 qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); 1452 qib_flush_wc(); 1453 __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); 1454 qib_flush_wc(); 1455 } else 1456 qib_pio_copy(piobuf + 2, hdr, hdrwords); 1457 qib_sendbuf_done(dd, bufn); 1458 } 1459 1460 /* 1461 * This is called with interrupts disabled and sdma_lock held. 1462 */ 1463 static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) 1464 { 1465 struct qib_devdata *dd = ppd->dd; 1466 u64 set_sendctrl = 0; 1467 u64 clr_sendctrl = 0; 1468 1469 if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) 1470 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1471 else 1472 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); 1473 1474 if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) 1475 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1476 else 1477 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); 1478 1479 if (op & QIB_SDMA_SENDCTRL_OP_HALT) 1480 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1481 else 1482 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); 1483 1484 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) 1485 set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1486 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1487 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1488 else 1489 clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | 1490 SYM_MASK(SendCtrl_0, TxeAbortIbc) | 1491 SYM_MASK(SendCtrl_0, TxeDrainRmFifo); 1492 1493 spin_lock(&dd->sendctrl_lock); 1494 1495 /* If we are draining everything, block sends first */ 1496 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1497 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 1498 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1499 qib_write_kreg(dd, kr_scratch, 0); 1500 } 1501 1502 ppd->p_sendctrl |= set_sendctrl; 1503 ppd->p_sendctrl &= ~clr_sendctrl; 1504 1505 if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) 1506 qib_write_kreg_port(ppd, krp_sendctrl, 1507 ppd->p_sendctrl | 1508 SYM_MASK(SendCtrl_0, SDmaCleanup)); 1509 else 1510 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1511 qib_write_kreg(dd, kr_scratch, 0); 1512 1513 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { 1514 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 1515 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 1516 qib_write_kreg(dd, kr_scratch, 0); 1517 } 1518 1519 spin_unlock(&dd->sendctrl_lock); 1520 1521 if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) 1522 flush_fifo(ppd); 1523 } 1524 1525 static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) 1526 { 1527 __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); 1528 } 1529 1530 static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) 1531 { 1532 /* 1533 * Set SendDmaLenGen and clear and set 1534 * the MSB of the generation count to enable generation checking 1535 * and load the internal generation counter. 1536 */ 1537 qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); 1538 qib_write_kreg_port(ppd, krp_senddmalengen, 1539 ppd->sdma_descq_cnt | 1540 (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); 1541 } 1542 1543 /* 1544 * Must be called with sdma_lock held, or before init finished. 1545 */ 1546 static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) 1547 { 1548 /* Commit writes to memory and advance the tail on the chip */ 1549 wmb(); 1550 ppd->sdma_descq_tail = tail; 1551 qib_write_kreg_port(ppd, krp_senddmatail, tail); 1552 } 1553 1554 /* 1555 * This is called with interrupts disabled and sdma_lock held. 1556 */ 1557 static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) 1558 { 1559 /* 1560 * Drain all FIFOs. 1561 * The hardware doesn't require this but we do it so that verbs 1562 * and user applications don't wait for link active to send stale 1563 * data. 1564 */ 1565 sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); 1566 1567 qib_sdma_7322_setlengen(ppd); 1568 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 1569 ppd->sdma_head_dma[0] = 0; 1570 qib_7322_sdma_sendctrl(ppd, 1571 ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); 1572 } 1573 1574 #define DISABLES_SDMA ( \ 1575 QIB_E_P_SDMAHALT | \ 1576 QIB_E_P_SDMADESCADDRMISALIGN | \ 1577 QIB_E_P_SDMAMISSINGDW | \ 1578 QIB_E_P_SDMADWEN | \ 1579 QIB_E_P_SDMARPYTAG | \ 1580 QIB_E_P_SDMA1STDESC | \ 1581 QIB_E_P_SDMABASE | \ 1582 QIB_E_P_SDMATAILOUTOFBOUND | \ 1583 QIB_E_P_SDMAOUTOFBOUND | \ 1584 QIB_E_P_SDMAGENMISMATCH) 1585 1586 static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) 1587 { 1588 unsigned long flags; 1589 struct qib_devdata *dd = ppd->dd; 1590 1591 errs &= QIB_E_P_SDMAERRS; 1592 err_decode(ppd->cpspec->sdmamsgbuf, sizeof(ppd->cpspec->sdmamsgbuf), 1593 errs, qib_7322p_error_msgs); 1594 1595 if (errs & QIB_E_P_SDMAUNEXPDATA) 1596 qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, 1597 ppd->port); 1598 1599 spin_lock_irqsave(&ppd->sdma_lock, flags); 1600 1601 if (errs != QIB_E_P_SDMAHALT) { 1602 /* SDMA errors have QIB_E_P_SDMAHALT and another bit set */ 1603 qib_dev_porterr(dd, ppd->port, 1604 "SDMA %s 0x%016llx %s\n", 1605 qib_sdma_state_names[ppd->sdma_state.current_state], 1606 errs, ppd->cpspec->sdmamsgbuf); 1607 dump_sdma_7322_state(ppd); 1608 } 1609 1610 switch (ppd->sdma_state.current_state) { 1611 case qib_sdma_state_s00_hw_down: 1612 break; 1613 1614 case qib_sdma_state_s10_hw_start_up_wait: 1615 if (errs & QIB_E_P_SDMAHALT) 1616 __qib_sdma_process_event(ppd, 1617 qib_sdma_event_e20_hw_started); 1618 break; 1619 1620 case qib_sdma_state_s20_idle: 1621 break; 1622 1623 case qib_sdma_state_s30_sw_clean_up_wait: 1624 break; 1625 1626 case qib_sdma_state_s40_hw_clean_up_wait: 1627 if (errs & QIB_E_P_SDMAHALT) 1628 __qib_sdma_process_event(ppd, 1629 qib_sdma_event_e50_hw_cleaned); 1630 break; 1631 1632 case qib_sdma_state_s50_hw_halt_wait: 1633 if (errs & QIB_E_P_SDMAHALT) 1634 __qib_sdma_process_event(ppd, 1635 qib_sdma_event_e60_hw_halted); 1636 break; 1637 1638 case qib_sdma_state_s99_running: 1639 __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); 1640 __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); 1641 break; 1642 } 1643 1644 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 1645 } 1646 1647 /* 1648 * handle per-device errors (not per-port errors) 1649 */ 1650 static noinline void handle_7322_errors(struct qib_devdata *dd) 1651 { 1652 char *msg; 1653 u64 iserr = 0; 1654 u64 errs; 1655 u64 mask; 1656 1657 qib_stats.sps_errints++; 1658 errs = qib_read_kreg64(dd, kr_errstatus); 1659 if (!errs) { 1660 qib_devinfo(dd->pcidev, 1661 "device error interrupt, but no error bits set!\n"); 1662 goto done; 1663 } 1664 1665 /* don't report errors that are masked */ 1666 errs &= dd->cspec->errormask; 1667 msg = dd->cspec->emsgbuf; 1668 1669 /* do these first, they are most important */ 1670 if (errs & QIB_E_HARDWARE) { 1671 *msg = '\0'; 1672 qib_7322_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); 1673 } 1674 1675 if (errs & QIB_E_SPKTERRS) { 1676 qib_disarm_7322_senderrbufs(dd->pport); 1677 qib_stats.sps_txerrs++; 1678 } else if (errs & QIB_E_INVALIDADDR) 1679 qib_stats.sps_txerrs++; 1680 else if (errs & QIB_E_ARMLAUNCH) { 1681 qib_stats.sps_txerrs++; 1682 qib_disarm_7322_senderrbufs(dd->pport); 1683 } 1684 qib_write_kreg(dd, kr_errclear, errs); 1685 1686 /* 1687 * The ones we mask off are handled specially below 1688 * or above. Also mask SDMADISABLED by default as it 1689 * is too chatty. 1690 */ 1691 mask = QIB_E_HARDWARE; 1692 *msg = '\0'; 1693 1694 err_decode(msg, sizeof(dd->cspec->emsgbuf), errs & ~mask, 1695 qib_7322error_msgs); 1696 1697 /* 1698 * Getting reset is a tragedy for all ports. Mark the device 1699 * _and_ the ports as "offline" in way meaningful to each. 1700 */ 1701 if (errs & QIB_E_RESET) { 1702 int pidx; 1703 1704 qib_dev_err(dd, 1705 "Got reset, requires re-init (unload and reload driver)\n"); 1706 dd->flags &= ~QIB_INITTED; /* needs re-init */ 1707 /* mark as having had error */ 1708 *dd->devstatusp |= QIB_STATUS_HWERROR; 1709 for (pidx = 0; pidx < dd->num_pports; ++pidx) 1710 if (dd->pport[pidx].link_speed_supported) 1711 *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; 1712 } 1713 1714 if (*msg && iserr) 1715 qib_dev_err(dd, "%s error\n", msg); 1716 1717 /* 1718 * If there were hdrq or egrfull errors, wake up any processes 1719 * waiting in poll. We used to try to check which contexts had 1720 * the overflow, but given the cost of that and the chip reads 1721 * to support it, it's better to just wake everybody up if we 1722 * get an overflow; waiters can poll again if it's not them. 1723 */ 1724 if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { 1725 qib_handle_urcv(dd, ~0U); 1726 if (errs & ERR_MASK(RcvEgrFullErr)) 1727 qib_stats.sps_buffull++; 1728 else 1729 qib_stats.sps_hdrfull++; 1730 } 1731 1732 done: 1733 return; 1734 } 1735 1736 static void qib_error_tasklet(unsigned long data) 1737 { 1738 struct qib_devdata *dd = (struct qib_devdata *)data; 1739 1740 handle_7322_errors(dd); 1741 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 1742 } 1743 1744 static void reenable_chase(struct timer_list *t) 1745 { 1746 struct qib_chippport_specific *cp = from_timer(cp, t, chase_timer); 1747 struct qib_pportdata *ppd = cp->ppd; 1748 1749 ppd->cpspec->chase_timer.expires = 0; 1750 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1751 QLOGIC_IB_IBCC_LINKINITCMD_POLL); 1752 } 1753 1754 static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow, 1755 u8 ibclt) 1756 { 1757 ppd->cpspec->chase_end = 0; 1758 1759 if (!qib_chase) 1760 return; 1761 1762 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, 1763 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1764 ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; 1765 add_timer(&ppd->cpspec->chase_timer); 1766 } 1767 1768 static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) 1769 { 1770 u8 ibclt; 1771 unsigned long tnow; 1772 1773 ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); 1774 1775 /* 1776 * Detect and handle the state chase issue, where we can 1777 * get stuck if we are unlucky on timing on both sides of 1778 * the link. If we are, we disable, set a timer, and 1779 * then re-enable. 1780 */ 1781 switch (ibclt) { 1782 case IB_7322_LT_STATE_CFGRCVFCFG: 1783 case IB_7322_LT_STATE_CFGWAITRMT: 1784 case IB_7322_LT_STATE_TXREVLANES: 1785 case IB_7322_LT_STATE_CFGENH: 1786 tnow = jiffies; 1787 if (ppd->cpspec->chase_end && 1788 time_after(tnow, ppd->cpspec->chase_end)) 1789 disable_chase(ppd, tnow, ibclt); 1790 else if (!ppd->cpspec->chase_end) 1791 ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; 1792 break; 1793 default: 1794 ppd->cpspec->chase_end = 0; 1795 break; 1796 } 1797 1798 if (((ibclt >= IB_7322_LT_STATE_CFGTEST && 1799 ibclt <= IB_7322_LT_STATE_CFGWAITENH) || 1800 ibclt == IB_7322_LT_STATE_LINKUP) && 1801 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { 1802 force_h1(ppd); 1803 ppd->cpspec->qdr_reforce = 1; 1804 if (!ppd->dd->cspec->r1) 1805 serdes_7322_los_enable(ppd, 0); 1806 } else if (ppd->cpspec->qdr_reforce && 1807 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && 1808 (ibclt == IB_7322_LT_STATE_CFGENH || 1809 ibclt == IB_7322_LT_STATE_CFGIDLE || 1810 ibclt == IB_7322_LT_STATE_LINKUP)) 1811 force_h1(ppd); 1812 1813 if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && 1814 ppd->link_speed_enabled == QIB_IB_QDR && 1815 (ibclt == IB_7322_LT_STATE_CFGTEST || 1816 ibclt == IB_7322_LT_STATE_CFGENH || 1817 (ibclt >= IB_7322_LT_STATE_POLLACTIVE && 1818 ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) 1819 adj_tx_serdes(ppd); 1820 1821 if (ibclt != IB_7322_LT_STATE_LINKUP) { 1822 u8 ltstate = qib_7322_phys_portstate(ibcst); 1823 u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, 1824 LinkTrainingState); 1825 if (!ppd->dd->cspec->r1 && 1826 pibclt == IB_7322_LT_STATE_LINKUP && 1827 ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1828 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 1829 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 1830 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 1831 /* If the link went down (but no into recovery, 1832 * turn LOS back on */ 1833 serdes_7322_los_enable(ppd, 1); 1834 if (!ppd->cpspec->qdr_dfe_on && 1835 ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { 1836 ppd->cpspec->qdr_dfe_on = 1; 1837 ppd->cpspec->qdr_dfe_time = 0; 1838 /* On link down, reenable QDR adaptation */ 1839 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 1840 ppd->dd->cspec->r1 ? 1841 QDR_STATIC_ADAPT_DOWN_R1 : 1842 QDR_STATIC_ADAPT_DOWN); 1843 pr_info( 1844 "IB%u:%u re-enabled QDR adaptation ibclt %x\n", 1845 ppd->dd->unit, ppd->port, ibclt); 1846 } 1847 } 1848 } 1849 1850 static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32); 1851 1852 /* 1853 * This is per-pport error handling. 1854 * will likely get it's own MSIx interrupt (one for each port, 1855 * although just a single handler). 1856 */ 1857 static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) 1858 { 1859 char *msg; 1860 u64 ignore_this_time = 0, iserr = 0, errs, fmask; 1861 struct qib_devdata *dd = ppd->dd; 1862 1863 /* do this as soon as possible */ 1864 fmask = qib_read_kreg64(dd, kr_act_fmask); 1865 if (!fmask) 1866 check_7322_rxe_status(ppd); 1867 1868 errs = qib_read_kreg_port(ppd, krp_errstatus); 1869 if (!errs) 1870 qib_devinfo(dd->pcidev, 1871 "Port%d error interrupt, but no error bits set!\n", 1872 ppd->port); 1873 if (!fmask) 1874 errs &= ~QIB_E_P_IBSTATUSCHANGED; 1875 if (!errs) 1876 goto done; 1877 1878 msg = ppd->cpspec->epmsgbuf; 1879 *msg = '\0'; 1880 1881 if (errs & ~QIB_E_P_BITSEXTANT) { 1882 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1883 errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); 1884 if (!*msg) 1885 snprintf(msg, sizeof(ppd->cpspec->epmsgbuf), 1886 "no others"); 1887 qib_dev_porterr(dd, ppd->port, 1888 "error interrupt with unknown errors 0x%016Lx set (and %s)\n", 1889 (errs & ~QIB_E_P_BITSEXTANT), msg); 1890 *msg = '\0'; 1891 } 1892 1893 if (errs & QIB_E_P_SHDR) { 1894 u64 symptom; 1895 1896 /* determine cause, then write to clear */ 1897 symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); 1898 qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); 1899 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), symptom, 1900 hdrchk_msgs); 1901 *msg = '\0'; 1902 /* senderrbuf cleared in SPKTERRS below */ 1903 } 1904 1905 if (errs & QIB_E_P_SPKTERRS) { 1906 if ((errs & QIB_E_P_LINK_PKTERRS) && 1907 !(ppd->lflags & QIBL_LINKACTIVE)) { 1908 /* 1909 * This can happen when trying to bring the link 1910 * up, but the IB link changes state at the "wrong" 1911 * time. The IB logic then complains that the packet 1912 * isn't valid. We don't want to confuse people, so 1913 * we just don't print them, except at debug 1914 */ 1915 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), 1916 (errs & QIB_E_P_LINK_PKTERRS), 1917 qib_7322p_error_msgs); 1918 *msg = '\0'; 1919 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1920 } 1921 qib_disarm_7322_senderrbufs(ppd); 1922 } else if ((errs & QIB_E_P_LINK_PKTERRS) && 1923 !(ppd->lflags & QIBL_LINKACTIVE)) { 1924 /* 1925 * This can happen when SMA is trying to bring the link 1926 * up, but the IB link changes state at the "wrong" time. 1927 * The IB logic then complains that the packet isn't 1928 * valid. We don't want to confuse people, so we just 1929 * don't print them, except at debug 1930 */ 1931 err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs, 1932 qib_7322p_error_msgs); 1933 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; 1934 *msg = '\0'; 1935 } 1936 1937 qib_write_kreg_port(ppd, krp_errclear, errs); 1938 1939 errs &= ~ignore_this_time; 1940 if (!errs) 1941 goto done; 1942 1943 if (errs & QIB_E_P_RPKTERRS) 1944 qib_stats.sps_rcverrs++; 1945 if (errs & QIB_E_P_SPKTERRS) 1946 qib_stats.sps_txerrs++; 1947 1948 iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); 1949 1950 if (errs & QIB_E_P_SDMAERRS) 1951 sdma_7322_p_errors(ppd, errs); 1952 1953 if (errs & QIB_E_P_IBSTATUSCHANGED) { 1954 u64 ibcs; 1955 u8 ltstate; 1956 1957 ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); 1958 ltstate = qib_7322_phys_portstate(ibcs); 1959 1960 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 1961 handle_serdes_issues(ppd, ibcs); 1962 if (!(ppd->cpspec->ibcctrl_a & 1963 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { 1964 /* 1965 * We got our interrupt, so init code should be 1966 * happy and not try alternatives. Now squelch 1967 * other "chatter" from link-negotiation (pre Init) 1968 */ 1969 ppd->cpspec->ibcctrl_a |= 1970 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 1971 qib_write_kreg_port(ppd, krp_ibcctrl_a, 1972 ppd->cpspec->ibcctrl_a); 1973 } 1974 1975 /* Update our picture of width and speed from chip */ 1976 ppd->link_width_active = 1977 (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? 1978 IB_WIDTH_4X : IB_WIDTH_1X; 1979 ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, 1980 LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & 1981 SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? 1982 QIB_IB_DDR : QIB_IB_SDR; 1983 1984 if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != 1985 IB_PHYSPORTSTATE_DISABLED) 1986 qib_set_ib_7322_lstate(ppd, 0, 1987 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 1988 else 1989 /* 1990 * Since going into a recovery state causes the link 1991 * state to go down and since recovery is transitory, 1992 * it is better if we "miss" ever seeing the link 1993 * training state go into recovery (i.e., ignore this 1994 * transition for link state special handling purposes) 1995 * without updating lastibcstat. 1996 */ 1997 if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && 1998 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && 1999 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && 2000 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) 2001 qib_handle_e_ibstatuschanged(ppd, ibcs); 2002 } 2003 if (*msg && iserr) 2004 qib_dev_porterr(dd, ppd->port, "%s error\n", msg); 2005 2006 if (ppd->state_wanted & ppd->lflags) 2007 wake_up_interruptible(&ppd->state_wait); 2008 done: 2009 return; 2010 } 2011 2012 /* enable/disable chip from delivering interrupts */ 2013 static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) 2014 { 2015 if (enable) { 2016 if (dd->flags & QIB_BADINTR) 2017 return; 2018 qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); 2019 /* cause any pending enabled interrupts to be re-delivered */ 2020 qib_write_kreg(dd, kr_intclear, 0ULL); 2021 if (dd->cspec->num_msix_entries) { 2022 /* and same for MSIx */ 2023 u64 val = qib_read_kreg64(dd, kr_intgranted); 2024 2025 if (val) 2026 qib_write_kreg(dd, kr_intgranted, val); 2027 } 2028 } else 2029 qib_write_kreg(dd, kr_intmask, 0ULL); 2030 } 2031 2032 /* 2033 * Try to cleanup as much as possible for anything that might have gone 2034 * wrong while in freeze mode, such as pio buffers being written by user 2035 * processes (causing armlaunch), send errors due to going into freeze mode, 2036 * etc., and try to avoid causing extra interrupts while doing so. 2037 * Forcibly update the in-memory pioavail register copies after cleanup 2038 * because the chip won't do it while in freeze mode (the register values 2039 * themselves are kept correct). 2040 * Make sure that we don't lose any important interrupts by using the chip 2041 * feature that says that writing 0 to a bit in *clear that is set in 2042 * *status will cause an interrupt to be generated again (if allowed by 2043 * the *mask value). 2044 * This is in chip-specific code because of all of the register accesses, 2045 * even though the details are similar on most chips. 2046 */ 2047 static void qib_7322_clear_freeze(struct qib_devdata *dd) 2048 { 2049 int pidx; 2050 2051 /* disable error interrupts, to avoid confusion */ 2052 qib_write_kreg(dd, kr_errmask, 0ULL); 2053 2054 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2055 if (dd->pport[pidx].link_speed_supported) 2056 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2057 0ULL); 2058 2059 /* also disable interrupts; errormask is sometimes overwritten */ 2060 qib_7322_set_intr_state(dd, 0); 2061 2062 /* clear the freeze, and be sure chip saw it */ 2063 qib_write_kreg(dd, kr_control, dd->control); 2064 qib_read_kreg32(dd, kr_scratch); 2065 2066 /* 2067 * Force new interrupt if any hwerr, error or interrupt bits are 2068 * still set, and clear "safe" send packet errors related to freeze 2069 * and cancelling sends. Re-enable error interrupts before possible 2070 * force of re-interrupt on pending interrupts. 2071 */ 2072 qib_write_kreg(dd, kr_hwerrclear, 0ULL); 2073 qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); 2074 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2075 /* We need to purge per-port errs and reset mask, too */ 2076 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 2077 if (!dd->pport[pidx].link_speed_supported) 2078 continue; 2079 qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); 2080 qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); 2081 } 2082 qib_7322_set_intr_state(dd, 1); 2083 } 2084 2085 /* no error handling to speak of */ 2086 /** 2087 * qib_7322_handle_hwerrors - display hardware errors. 2088 * @dd: the qlogic_ib device 2089 * @msg: the output buffer 2090 * @msgl: the size of the output buffer 2091 * 2092 * Use same msg buffer as regular errors to avoid excessive stack 2093 * use. Most hardware errors are catastrophic, but for right now, 2094 * we'll print them and continue. We reuse the same message buffer as 2095 * qib_handle_errors() to avoid excessive stack usage. 2096 */ 2097 static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, 2098 size_t msgl) 2099 { 2100 u64 hwerrs; 2101 u32 ctrl; 2102 int isfatal = 0; 2103 2104 hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); 2105 if (!hwerrs) 2106 goto bail; 2107 if (hwerrs == ~0ULL) { 2108 qib_dev_err(dd, 2109 "Read of hardware error status failed (all bits set); ignoring\n"); 2110 goto bail; 2111 } 2112 qib_stats.sps_hwerrs++; 2113 2114 /* Always clear the error status register, except BIST fail */ 2115 qib_write_kreg(dd, kr_hwerrclear, hwerrs & 2116 ~HWE_MASK(PowerOnBISTFailed)); 2117 2118 hwerrs &= dd->cspec->hwerrmask; 2119 2120 /* no EEPROM logging, yet */ 2121 2122 if (hwerrs) 2123 qib_devinfo(dd->pcidev, 2124 "Hardware error: hwerr=0x%llx (cleared)\n", 2125 (unsigned long long) hwerrs); 2126 2127 ctrl = qib_read_kreg32(dd, kr_control); 2128 if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { 2129 /* 2130 * No recovery yet... 2131 */ 2132 if ((hwerrs & ~HWE_MASK(LATriggered)) || 2133 dd->cspec->stay_in_freeze) { 2134 /* 2135 * If any set that we aren't ignoring only make the 2136 * complaint once, in case it's stuck or recurring, 2137 * and we get here multiple times 2138 * Force link down, so switch knows, and 2139 * LEDs are turned off. 2140 */ 2141 if (dd->flags & QIB_INITTED) 2142 isfatal = 1; 2143 } else 2144 qib_7322_clear_freeze(dd); 2145 } 2146 2147 if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { 2148 isfatal = 1; 2149 strlcpy(msg, 2150 "[Memory BIST test failed, InfiniPath hardware unusable]", 2151 msgl); 2152 /* ignore from now on, so disable until driver reloaded */ 2153 dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); 2154 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2155 } 2156 2157 err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); 2158 2159 /* Ignore esoteric PLL failures et al. */ 2160 2161 qib_dev_err(dd, "%s hardware error\n", msg); 2162 2163 if (hwerrs & 2164 (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) | 2165 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) { 2166 int pidx = 0; 2167 int err; 2168 unsigned long flags; 2169 struct qib_pportdata *ppd = dd->pport; 2170 2171 for (; pidx < dd->num_pports; ++pidx, ppd++) { 2172 err = 0; 2173 if (pidx == 0 && (hwerrs & 2174 SYM_MASK(HwErrMask, SDmaMemReadErrMask_0))) 2175 err++; 2176 if (pidx == 1 && (hwerrs & 2177 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) 2178 err++; 2179 if (err) { 2180 spin_lock_irqsave(&ppd->sdma_lock, flags); 2181 dump_sdma_7322_state(ppd); 2182 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 2183 } 2184 } 2185 } 2186 2187 if (isfatal && !dd->diag_client) { 2188 qib_dev_err(dd, 2189 "Fatal Hardware Error, no longer usable, SN %.16s\n", 2190 dd->serial); 2191 /* 2192 * for /sys status file and user programs to print; if no 2193 * trailing brace is copied, we'll know it was truncated. 2194 */ 2195 if (dd->freezemsg) 2196 snprintf(dd->freezemsg, dd->freezelen, 2197 "{%s}", msg); 2198 qib_disable_after_error(dd); 2199 } 2200 bail:; 2201 } 2202 2203 /** 2204 * qib_7322_init_hwerrors - enable hardware errors 2205 * @dd: the qlogic_ib device 2206 * 2207 * now that we have finished initializing everything that might reasonably 2208 * cause a hardware error, and cleared those errors bits as they occur, 2209 * we can enable hardware errors in the mask (potentially enabling 2210 * freeze mode), and enable hardware errors as errors (along with 2211 * everything else) in errormask 2212 */ 2213 static void qib_7322_init_hwerrors(struct qib_devdata *dd) 2214 { 2215 int pidx; 2216 u64 extsval; 2217 2218 extsval = qib_read_kreg64(dd, kr_extstatus); 2219 if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | 2220 QIB_EXTS_MEMBIST_ENDTEST))) 2221 qib_dev_err(dd, "MemBIST did not complete!\n"); 2222 2223 /* never clear BIST failure, so reported on each driver load */ 2224 qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); 2225 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 2226 2227 /* clear all */ 2228 qib_write_kreg(dd, kr_errclear, ~0ULL); 2229 /* enable errors that are masked, at least this first time. */ 2230 qib_write_kreg(dd, kr_errmask, ~0ULL); 2231 dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); 2232 for (pidx = 0; pidx < dd->num_pports; ++pidx) 2233 if (dd->pport[pidx].link_speed_supported) 2234 qib_write_kreg_port(dd->pport + pidx, krp_errmask, 2235 ~0ULL); 2236 } 2237 2238 /* 2239 * Disable and enable the armlaunch error. Used for PIO bandwidth testing 2240 * on chips that are count-based, rather than trigger-based. There is no 2241 * reference counting, but that's also fine, given the intended use. 2242 * Only chip-specific because it's all register accesses 2243 */ 2244 static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) 2245 { 2246 if (enable) { 2247 qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); 2248 dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; 2249 } else 2250 dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; 2251 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); 2252 } 2253 2254 /* 2255 * Formerly took parameter <which> in pre-shifted, 2256 * pre-merged form with LinkCmd and LinkInitCmd 2257 * together, and assuming the zero was NOP. 2258 */ 2259 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, 2260 u16 linitcmd) 2261 { 2262 u64 mod_wd; 2263 struct qib_devdata *dd = ppd->dd; 2264 unsigned long flags; 2265 2266 if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { 2267 /* 2268 * If we are told to disable, note that so link-recovery 2269 * code does not attempt to bring us back up. 2270 * Also reset everything that we can, so we start 2271 * completely clean when re-enabled (before we 2272 * actually issue the disable to the IBC) 2273 */ 2274 qib_7322_mini_pcs_reset(ppd); 2275 spin_lock_irqsave(&ppd->lflags_lock, flags); 2276 ppd->lflags |= QIBL_IB_LINK_DISABLED; 2277 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2278 } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { 2279 /* 2280 * Any other linkinitcmd will lead to LINKDOWN and then 2281 * to INIT (if all is well), so clear flag to let 2282 * link-recovery code attempt to bring us back up. 2283 */ 2284 spin_lock_irqsave(&ppd->lflags_lock, flags); 2285 ppd->lflags &= ~QIBL_IB_LINK_DISABLED; 2286 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2287 /* 2288 * Clear status change interrupt reduction so the 2289 * new state is seen. 2290 */ 2291 ppd->cpspec->ibcctrl_a &= 2292 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 2293 } 2294 2295 mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | 2296 (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2297 2298 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | 2299 mod_wd); 2300 /* write to chip to prevent back-to-back writes of ibc reg */ 2301 qib_write_kreg(dd, kr_scratch, 0); 2302 2303 } 2304 2305 /* 2306 * The total RCV buffer memory is 64KB, used for both ports, and is 2307 * in units of 64 bytes (same as IB flow control credit unit). 2308 * The consumedVL unit in the same registers are in 32 byte units! 2309 * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, 2310 * and we can therefore allocate just 9 IB credits for 2 VL15 packets 2311 * in krp_rxcreditvl15, rather than 10. 2312 */ 2313 #define RCV_BUF_UNITSZ 64 2314 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) 2315 2316 static void set_vls(struct qib_pportdata *ppd) 2317 { 2318 int i, numvls, totcred, cred_vl, vl0extra; 2319 struct qib_devdata *dd = ppd->dd; 2320 u64 val; 2321 2322 numvls = qib_num_vls(ppd->vls_operational); 2323 2324 /* 2325 * Set up per-VL credits. Below is kluge based on these assumptions: 2326 * 1) port is disabled at the time early_init is called. 2327 * 2) give VL15 17 credits, for two max-plausible packets. 2328 * 3) Give VL0-N the rest, with any rounding excess used for VL0 2329 */ 2330 /* 2 VL15 packets @ 288 bytes each (including IB headers) */ 2331 totcred = NUM_RCV_BUF_UNITS(dd); 2332 cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; 2333 totcred -= cred_vl; 2334 qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); 2335 cred_vl = totcred / numvls; 2336 vl0extra = totcred - cred_vl * numvls; 2337 qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); 2338 for (i = 1; i < numvls; i++) 2339 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); 2340 for (; i < 8; i++) /* no buffer space for other VLs */ 2341 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 2342 2343 /* Notify IBC that credits need to be recalculated */ 2344 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 2345 val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2346 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2347 qib_write_kreg(dd, kr_scratch, 0ULL); 2348 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); 2349 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 2350 2351 for (i = 0; i < numvls; i++) 2352 val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); 2353 val = qib_read_kreg_port(ppd, krp_rxcreditvl15); 2354 2355 /* Change the number of operational VLs */ 2356 ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & 2357 ~SYM_MASK(IBCCtrlA_0, NumVLane)) | 2358 ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); 2359 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2360 qib_write_kreg(dd, kr_scratch, 0ULL); 2361 } 2362 2363 /* 2364 * The code that deals with actual SerDes is in serdes_7322_init(). 2365 * Compared to the code for iba7220, it is minimal. 2366 */ 2367 static int serdes_7322_init(struct qib_pportdata *ppd); 2368 2369 /** 2370 * qib_7322_bringup_serdes - bring up the serdes 2371 * @ppd: physical port on the qlogic_ib device 2372 */ 2373 static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) 2374 { 2375 struct qib_devdata *dd = ppd->dd; 2376 u64 val, guid, ibc; 2377 unsigned long flags; 2378 int ret = 0; 2379 2380 /* 2381 * SerDes model not in Pd, but still need to 2382 * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere 2383 * eventually. 2384 */ 2385 /* Put IBC in reset, sends disabled (should be in reset already) */ 2386 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2387 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 2388 qib_write_kreg(dd, kr_scratch, 0ULL); 2389 2390 /* ensure previous Tx parameters are not still forced */ 2391 qib_write_kreg_port(ppd, krp_tx_deemph_override, 2392 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 2393 reset_tx_deemphasis_override)); 2394 2395 if (qib_compat_ddr_negotiate) { 2396 ppd->cpspec->ibdeltainprog = 1; 2397 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 2398 crp_ibsymbolerr); 2399 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 2400 crp_iblinkerrrecov); 2401 } 2402 2403 /* flowcontrolwatermark is in units of KBytes */ 2404 ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); 2405 /* 2406 * Flow control is sent this often, even if no changes in 2407 * buffer space occur. Units are 128ns for this chip. 2408 * Set to 3usec. 2409 */ 2410 ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); 2411 /* max error tolerance */ 2412 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 2413 /* IB credit flow control. */ 2414 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); 2415 /* 2416 * set initial max size pkt IBC will send, including ICRC; it's the 2417 * PIO buffer size in dwords, less 1; also see qib_set_mtu() 2418 */ 2419 ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << 2420 SYM_LSB(IBCCtrlA_0, MaxPktLen); 2421 ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ 2422 2423 /* 2424 * Reset the PCS interface to the serdes (and also ibc, which is still 2425 * in reset from above). Writes new value of ibcctrl_a as last step. 2426 */ 2427 qib_7322_mini_pcs_reset(ppd); 2428 2429 if (!ppd->cpspec->ibcctrl_b) { 2430 unsigned lse = ppd->link_speed_enabled; 2431 2432 /* 2433 * Not on re-init after reset, establish shadow 2434 * and force initial config. 2435 */ 2436 ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, 2437 krp_ibcctrl_b); 2438 ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | 2439 IBA7322_IBC_SPEED_DDR | 2440 IBA7322_IBC_SPEED_SDR | 2441 IBA7322_IBC_WIDTH_AUTONEG | 2442 SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); 2443 if (lse & (lse - 1)) /* Muliple speeds enabled */ 2444 ppd->cpspec->ibcctrl_b |= 2445 (lse << IBA7322_IBC_SPEED_LSB) | 2446 IBA7322_IBC_IBTA_1_2_MASK | 2447 IBA7322_IBC_MAX_SPEED_MASK; 2448 else 2449 ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? 2450 IBA7322_IBC_SPEED_QDR | 2451 IBA7322_IBC_IBTA_1_2_MASK : 2452 (lse == QIB_IB_DDR) ? 2453 IBA7322_IBC_SPEED_DDR : 2454 IBA7322_IBC_SPEED_SDR; 2455 if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == 2456 (IB_WIDTH_1X | IB_WIDTH_4X)) 2457 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; 2458 else 2459 ppd->cpspec->ibcctrl_b |= 2460 ppd->link_width_enabled == IB_WIDTH_4X ? 2461 IBA7322_IBC_WIDTH_4X_ONLY : 2462 IBA7322_IBC_WIDTH_1X_ONLY; 2463 2464 /* always enable these on driver reload, not sticky */ 2465 ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | 2466 IBA7322_IBC_HRTBT_MASK); 2467 } 2468 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 2469 2470 /* setup so we have more time at CFGTEST to change H1 */ 2471 val = qib_read_kreg_port(ppd, krp_ibcctrl_c); 2472 val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); 2473 val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); 2474 qib_write_kreg_port(ppd, krp_ibcctrl_c, val); 2475 2476 serdes_7322_init(ppd); 2477 2478 guid = be64_to_cpu(ppd->guid); 2479 if (!guid) { 2480 if (dd->base_guid) 2481 guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; 2482 ppd->guid = cpu_to_be64(guid); 2483 } 2484 2485 qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); 2486 /* write to chip to prevent back-to-back writes of ibc reg */ 2487 qib_write_kreg(dd, kr_scratch, 0); 2488 2489 /* Enable port */ 2490 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); 2491 set_vls(ppd); 2492 2493 /* initially come up DISABLED, without sending anything. */ 2494 val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << 2495 QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); 2496 qib_write_kreg_port(ppd, krp_ibcctrl_a, val); 2497 qib_write_kreg(dd, kr_scratch, 0ULL); 2498 /* clear the linkinit cmds */ 2499 ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); 2500 2501 /* be paranoid against later code motion, etc. */ 2502 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 2503 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); 2504 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 2505 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 2506 2507 /* Also enable IBSTATUSCHG interrupt. */ 2508 val = qib_read_kreg_port(ppd, krp_errmask); 2509 qib_write_kreg_port(ppd, krp_errmask, 2510 val | ERR_MASK_N(IBStatusChanged)); 2511 2512 /* Always zero until we start messing with SerDes for real */ 2513 return ret; 2514 } 2515 2516 /** 2517 * qib_7322_quiet_serdes - set serdes to txidle 2518 * @dd: the qlogic_ib device 2519 * Called when driver is being unloaded 2520 */ 2521 static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) 2522 { 2523 u64 val; 2524 unsigned long flags; 2525 2526 qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 2527 2528 spin_lock_irqsave(&ppd->lflags_lock, flags); 2529 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 2530 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 2531 wake_up(&ppd->cpspec->autoneg_wait); 2532 cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); 2533 if (ppd->dd->cspec->r1) 2534 cancel_delayed_work_sync(&ppd->cpspec->ipg_work); 2535 2536 ppd->cpspec->chase_end = 0; 2537 if (ppd->cpspec->chase_timer.function) /* if initted */ 2538 del_timer_sync(&ppd->cpspec->chase_timer); 2539 2540 /* 2541 * Despite the name, actually disables IBC as well. Do it when 2542 * we are as sure as possible that no more packets can be 2543 * received, following the down and the PCS reset. 2544 * The actual disabling happens in qib_7322_mini_pci_reset(), 2545 * along with the PCS being reset. 2546 */ 2547 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); 2548 qib_7322_mini_pcs_reset(ppd); 2549 2550 /* 2551 * Update the adjusted counters so the adjustment persists 2552 * across driver reload. 2553 */ 2554 if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || 2555 ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { 2556 struct qib_devdata *dd = ppd->dd; 2557 u64 diagc; 2558 2559 /* enable counter writes */ 2560 diagc = qib_read_kreg64(dd, kr_hwdiagctrl); 2561 qib_write_kreg(dd, kr_hwdiagctrl, 2562 diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); 2563 2564 if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { 2565 val = read_7322_creg32_port(ppd, crp_ibsymbolerr); 2566 if (ppd->cpspec->ibdeltainprog) 2567 val -= val - ppd->cpspec->ibsymsnap; 2568 val -= ppd->cpspec->ibsymdelta; 2569 write_7322_creg_port(ppd, crp_ibsymbolerr, val); 2570 } 2571 if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { 2572 val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); 2573 if (ppd->cpspec->ibdeltainprog) 2574 val -= val - ppd->cpspec->iblnkerrsnap; 2575 val -= ppd->cpspec->iblnkerrdelta; 2576 write_7322_creg_port(ppd, crp_iblinkerrrecov, val); 2577 } 2578 if (ppd->cpspec->iblnkdowndelta) { 2579 val = read_7322_creg32_port(ppd, crp_iblinkdown); 2580 val += ppd->cpspec->iblnkdowndelta; 2581 write_7322_creg_port(ppd, crp_iblinkdown, val); 2582 } 2583 /* 2584 * No need to save ibmalfdelta since IB perfcounters 2585 * are cleared on driver reload. 2586 */ 2587 2588 /* and disable counter writes */ 2589 qib_write_kreg(dd, kr_hwdiagctrl, diagc); 2590 } 2591 } 2592 2593 /** 2594 * qib_setup_7322_setextled - set the state of the two external LEDs 2595 * @ppd: physical port on the qlogic_ib device 2596 * @on: whether the link is up or not 2597 * 2598 * The exact combo of LEDs if on is true is determined by looking 2599 * at the ibcstatus. 2600 * 2601 * These LEDs indicate the physical and logical state of IB link. 2602 * For this chip (at least with recommended board pinouts), LED1 2603 * is Yellow (logical state) and LED2 is Green (physical state), 2604 * 2605 * Note: We try to match the Mellanox HCA LED behavior as best 2606 * we can. Green indicates physical link state is OK (something is 2607 * plugged in, and we can train). 2608 * Amber indicates the link is logically up (ACTIVE). 2609 * Mellanox further blinks the amber LED to indicate data packet 2610 * activity, but we have no hardware support for that, so it would 2611 * require waking up every 10-20 msecs and checking the counters 2612 * on the chip, and then turning the LED off if appropriate. That's 2613 * visible overhead, so not something we will do. 2614 */ 2615 static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) 2616 { 2617 struct qib_devdata *dd = ppd->dd; 2618 u64 extctl, ledblink = 0, val; 2619 unsigned long flags; 2620 int yel, grn; 2621 2622 /* 2623 * The diags use the LED to indicate diag info, so we leave 2624 * the external LED alone when the diags are running. 2625 */ 2626 if (dd->diag_client) 2627 return; 2628 2629 /* Allow override of LED display for, e.g. Locating system in rack */ 2630 if (ppd->led_override) { 2631 grn = (ppd->led_override & QIB_LED_PHYS); 2632 yel = (ppd->led_override & QIB_LED_LOG); 2633 } else if (on) { 2634 val = qib_read_kreg_port(ppd, krp_ibcstatus_a); 2635 grn = qib_7322_phys_portstate(val) == 2636 IB_PHYSPORTSTATE_LINKUP; 2637 yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; 2638 } else { 2639 grn = 0; 2640 yel = 0; 2641 } 2642 2643 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2644 extctl = dd->cspec->extctrl & (ppd->port == 1 ? 2645 ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); 2646 if (grn) { 2647 extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; 2648 /* 2649 * Counts are in chip clock (4ns) periods. 2650 * This is 1/16 sec (66.6ms) on, 2651 * 3/16 sec (187.5 ms) off, with packets rcvd. 2652 */ 2653 ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | 2654 ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); 2655 } 2656 if (yel) 2657 extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; 2658 dd->cspec->extctrl = extctl; 2659 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 2660 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2661 2662 if (ledblink) /* blink the LED on packet receive */ 2663 qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); 2664 } 2665 2666 #ifdef CONFIG_INFINIBAND_QIB_DCA 2667 2668 static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event) 2669 { 2670 switch (event) { 2671 case DCA_PROVIDER_ADD: 2672 if (dd->flags & QIB_DCA_ENABLED) 2673 break; 2674 if (!dca_add_requester(&dd->pcidev->dev)) { 2675 qib_devinfo(dd->pcidev, "DCA enabled\n"); 2676 dd->flags |= QIB_DCA_ENABLED; 2677 qib_setup_dca(dd); 2678 } 2679 break; 2680 case DCA_PROVIDER_REMOVE: 2681 if (dd->flags & QIB_DCA_ENABLED) { 2682 dca_remove_requester(&dd->pcidev->dev); 2683 dd->flags &= ~QIB_DCA_ENABLED; 2684 dd->cspec->dca_ctrl = 0; 2685 qib_write_kreg(dd, KREG_IDX(DCACtrlA), 2686 dd->cspec->dca_ctrl); 2687 } 2688 break; 2689 } 2690 return 0; 2691 } 2692 2693 static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu) 2694 { 2695 struct qib_devdata *dd = rcd->dd; 2696 struct qib_chip_specific *cspec = dd->cspec; 2697 2698 if (!(dd->flags & QIB_DCA_ENABLED)) 2699 return; 2700 if (cspec->rhdr_cpu[rcd->ctxt] != cpu) { 2701 const struct dca_reg_map *rmp; 2702 2703 cspec->rhdr_cpu[rcd->ctxt] = cpu; 2704 rmp = &dca_rcvhdr_reg_map[rcd->ctxt]; 2705 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask; 2706 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |= 2707 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb; 2708 qib_devinfo(dd->pcidev, 2709 "Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu, 2710 (long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2711 qib_write_kreg(dd, rmp->regno, 2712 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); 2713 cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable); 2714 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2715 } 2716 } 2717 2718 static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu) 2719 { 2720 struct qib_devdata *dd = ppd->dd; 2721 struct qib_chip_specific *cspec = dd->cspec; 2722 unsigned pidx = ppd->port - 1; 2723 2724 if (!(dd->flags & QIB_DCA_ENABLED)) 2725 return; 2726 if (cspec->sdma_cpu[pidx] != cpu) { 2727 cspec->sdma_cpu[pidx] = cpu; 2728 cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ? 2729 SYM_MASK(DCACtrlF, SendDma1DCAOPH) : 2730 SYM_MASK(DCACtrlF, SendDma0DCAOPH)); 2731 cspec->dca_rcvhdr_ctrl[4] |= 2732 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << 2733 (ppd->hw_pidx ? 2734 SYM_LSB(DCACtrlF, SendDma1DCAOPH) : 2735 SYM_LSB(DCACtrlF, SendDma0DCAOPH)); 2736 qib_devinfo(dd->pcidev, 2737 "sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu, 2738 (long long) cspec->dca_rcvhdr_ctrl[4]); 2739 qib_write_kreg(dd, KREG_IDX(DCACtrlF), 2740 cspec->dca_rcvhdr_ctrl[4]); 2741 cspec->dca_ctrl |= ppd->hw_pidx ? 2742 SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) : 2743 SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable); 2744 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); 2745 } 2746 } 2747 2748 static void qib_setup_dca(struct qib_devdata *dd) 2749 { 2750 struct qib_chip_specific *cspec = dd->cspec; 2751 int i; 2752 2753 for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++) 2754 cspec->rhdr_cpu[i] = -1; 2755 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2756 cspec->sdma_cpu[i] = -1; 2757 cspec->dca_rcvhdr_ctrl[0] = 2758 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) | 2759 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) | 2760 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) | 2761 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt)); 2762 cspec->dca_rcvhdr_ctrl[1] = 2763 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) | 2764 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) | 2765 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) | 2766 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt)); 2767 cspec->dca_rcvhdr_ctrl[2] = 2768 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) | 2769 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) | 2770 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) | 2771 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt)); 2772 cspec->dca_rcvhdr_ctrl[3] = 2773 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) | 2774 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) | 2775 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) | 2776 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt)); 2777 cspec->dca_rcvhdr_ctrl[4] = 2778 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) | 2779 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt)); 2780 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) 2781 qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i, 2782 cspec->dca_rcvhdr_ctrl[i]); 2783 for (i = 0; i < cspec->num_msix_entries; i++) 2784 setup_dca_notifier(dd, i); 2785 } 2786 2787 static void qib_irq_notifier_notify(struct irq_affinity_notify *notify, 2788 const cpumask_t *mask) 2789 { 2790 struct qib_irq_notify *n = 2791 container_of(notify, struct qib_irq_notify, notify); 2792 int cpu = cpumask_first(mask); 2793 2794 if (n->rcv) { 2795 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2796 2797 qib_update_rhdrq_dca(rcd, cpu); 2798 } else { 2799 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2800 2801 qib_update_sdma_dca(ppd, cpu); 2802 } 2803 } 2804 2805 static void qib_irq_notifier_release(struct kref *ref) 2806 { 2807 struct qib_irq_notify *n = 2808 container_of(ref, struct qib_irq_notify, notify.kref); 2809 struct qib_devdata *dd; 2810 2811 if (n->rcv) { 2812 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; 2813 2814 dd = rcd->dd; 2815 } else { 2816 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; 2817 2818 dd = ppd->dd; 2819 } 2820 qib_devinfo(dd->pcidev, 2821 "release on HCA notify 0x%p n 0x%p\n", ref, n); 2822 kfree(n); 2823 } 2824 #endif 2825 2826 static void qib_7322_free_irq(struct qib_devdata *dd) 2827 { 2828 u64 intgranted; 2829 int i; 2830 2831 dd->cspec->main_int_mask = ~0ULL; 2832 2833 for (i = 0; i < dd->cspec->num_msix_entries; i++) { 2834 /* only free IRQs that were allocated */ 2835 if (dd->cspec->msix_entries[i].arg) { 2836 #ifdef CONFIG_INFINIBAND_QIB_DCA 2837 reset_dca_notifier(dd, i); 2838 #endif 2839 irq_set_affinity_hint(pci_irq_vector(dd->pcidev, i), 2840 NULL); 2841 free_cpumask_var(dd->cspec->msix_entries[i].mask); 2842 pci_free_irq(dd->pcidev, i, 2843 dd->cspec->msix_entries[i].arg); 2844 } 2845 } 2846 2847 /* If num_msix_entries was 0, disable the INTx IRQ */ 2848 if (!dd->cspec->num_msix_entries) 2849 pci_free_irq(dd->pcidev, 0, dd); 2850 else 2851 dd->cspec->num_msix_entries = 0; 2852 2853 pci_free_irq_vectors(dd->pcidev); 2854 2855 /* make sure no MSIx interrupts are left pending */ 2856 intgranted = qib_read_kreg64(dd, kr_intgranted); 2857 if (intgranted) 2858 qib_write_kreg(dd, kr_intgranted, intgranted); 2859 } 2860 2861 static void qib_setup_7322_cleanup(struct qib_devdata *dd) 2862 { 2863 int i; 2864 2865 #ifdef CONFIG_INFINIBAND_QIB_DCA 2866 if (dd->flags & QIB_DCA_ENABLED) { 2867 dca_remove_requester(&dd->pcidev->dev); 2868 dd->flags &= ~QIB_DCA_ENABLED; 2869 dd->cspec->dca_ctrl = 0; 2870 qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl); 2871 } 2872 #endif 2873 2874 qib_7322_free_irq(dd); 2875 kfree(dd->cspec->cntrs); 2876 kfree(dd->cspec->sendchkenable); 2877 kfree(dd->cspec->sendgrhchk); 2878 kfree(dd->cspec->sendibchk); 2879 kfree(dd->cspec->msix_entries); 2880 for (i = 0; i < dd->num_pports; i++) { 2881 unsigned long flags; 2882 u32 mask = QSFP_GPIO_MOD_PRS_N | 2883 (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); 2884 2885 kfree(dd->pport[i].cpspec->portcntrs); 2886 if (dd->flags & QIB_HAS_QSFP) { 2887 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 2888 dd->cspec->gpio_mask &= ~mask; 2889 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 2890 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 2891 } 2892 } 2893 } 2894 2895 /* handle SDMA interrupts */ 2896 static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) 2897 { 2898 struct qib_pportdata *ppd0 = &dd->pport[0]; 2899 struct qib_pportdata *ppd1 = &dd->pport[1]; 2900 u64 intr0 = istat & (INT_MASK_P(SDma, 0) | 2901 INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); 2902 u64 intr1 = istat & (INT_MASK_P(SDma, 1) | 2903 INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); 2904 2905 if (intr0) 2906 qib_sdma_intr(ppd0); 2907 if (intr1) 2908 qib_sdma_intr(ppd1); 2909 2910 if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) 2911 qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); 2912 if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) 2913 qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); 2914 } 2915 2916 /* 2917 * Set or clear the Send buffer available interrupt enable bit. 2918 */ 2919 static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) 2920 { 2921 unsigned long flags; 2922 2923 spin_lock_irqsave(&dd->sendctrl_lock, flags); 2924 if (needint) 2925 dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); 2926 else 2927 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); 2928 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 2929 qib_write_kreg(dd, kr_scratch, 0ULL); 2930 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 2931 } 2932 2933 /* 2934 * Somehow got an interrupt with reserved bits set in interrupt status. 2935 * Print a message so we know it happened, then clear them. 2936 * keep mainline interrupt handler cache-friendly 2937 */ 2938 static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) 2939 { 2940 u64 kills; 2941 char msg[128]; 2942 2943 kills = istat & ~QIB_I_BITSEXTANT; 2944 qib_dev_err(dd, 2945 "Clearing reserved interrupt(s) 0x%016llx: %s\n", 2946 (unsigned long long) kills, msg); 2947 qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); 2948 } 2949 2950 /* keep mainline interrupt handler cache-friendly */ 2951 static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) 2952 { 2953 u32 gpiostatus; 2954 int handled = 0; 2955 int pidx; 2956 2957 /* 2958 * Boards for this chip currently don't use GPIO interrupts, 2959 * so clear by writing GPIOstatus to GPIOclear, and complain 2960 * to developer. To avoid endless repeats, clear 2961 * the bits in the mask, since there is some kind of 2962 * programming error or chip problem. 2963 */ 2964 gpiostatus = qib_read_kreg32(dd, kr_gpio_status); 2965 /* 2966 * In theory, writing GPIOstatus to GPIOclear could 2967 * have a bad side-effect on some diagnostic that wanted 2968 * to poll for a status-change, but the various shadows 2969 * make that problematic at best. Diags will just suppress 2970 * all GPIO interrupts during such tests. 2971 */ 2972 qib_write_kreg(dd, kr_gpio_clear, gpiostatus); 2973 /* 2974 * Check for QSFP MOD_PRS changes 2975 * only works for single port if IB1 != pidx1 2976 */ 2977 for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); 2978 ++pidx) { 2979 struct qib_pportdata *ppd; 2980 struct qib_qsfp_data *qd; 2981 u32 mask; 2982 2983 if (!dd->pport[pidx].link_speed_supported) 2984 continue; 2985 mask = QSFP_GPIO_MOD_PRS_N; 2986 ppd = dd->pport + pidx; 2987 mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 2988 if (gpiostatus & dd->cspec->gpio_mask & mask) { 2989 u64 pins; 2990 2991 qd = &ppd->cpspec->qsfp_data; 2992 gpiostatus &= ~mask; 2993 pins = qib_read_kreg64(dd, kr_extstatus); 2994 pins >>= SYM_LSB(EXTStatus, GPIOIn); 2995 if (!(pins & mask)) { 2996 ++handled; 2997 qd->t_insert = jiffies; 2998 queue_work(ib_wq, &qd->work); 2999 } 3000 } 3001 } 3002 3003 if (gpiostatus && !handled) { 3004 const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); 3005 u32 gpio_irq = mask & gpiostatus; 3006 3007 /* 3008 * Clear any troublemakers, and update chip from shadow 3009 */ 3010 dd->cspec->gpio_mask &= ~gpio_irq; 3011 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 3012 } 3013 } 3014 3015 /* 3016 * Handle errors and unusual events first, separate function 3017 * to improve cache hits for fast path interrupt handling. 3018 */ 3019 static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) 3020 { 3021 if (istat & ~QIB_I_BITSEXTANT) 3022 unknown_7322_ibits(dd, istat); 3023 if (istat & QIB_I_GPIO) 3024 unknown_7322_gpio_intr(dd); 3025 if (istat & QIB_I_C_ERROR) { 3026 qib_write_kreg(dd, kr_errmask, 0ULL); 3027 tasklet_schedule(&dd->error_tasklet); 3028 } 3029 if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) 3030 handle_7322_p_errors(dd->rcd[0]->ppd); 3031 if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) 3032 handle_7322_p_errors(dd->rcd[1]->ppd); 3033 } 3034 3035 /* 3036 * Dynamically adjust the rcv int timeout for a context based on incoming 3037 * packet rate. 3038 */ 3039 static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) 3040 { 3041 struct qib_devdata *dd = rcd->dd; 3042 u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; 3043 3044 /* 3045 * Dynamically adjust idle timeout on chip 3046 * based on number of packets processed. 3047 */ 3048 if (npkts < rcv_int_count && timeout > 2) 3049 timeout >>= 1; 3050 else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) 3051 timeout = min(timeout << 1, rcv_int_timeout); 3052 else 3053 return; 3054 3055 dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; 3056 qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); 3057 } 3058 3059 /* 3060 * This is the main interrupt handler. 3061 * It will normally only be used for low frequency interrupts but may 3062 * have to handle all interrupts if INTx is enabled or fewer than normal 3063 * MSIx interrupts were allocated. 3064 * This routine should ignore the interrupt bits for any of the 3065 * dedicated MSIx handlers. 3066 */ 3067 static irqreturn_t qib_7322intr(int irq, void *data) 3068 { 3069 struct qib_devdata *dd = data; 3070 irqreturn_t ret; 3071 u64 istat; 3072 u64 ctxtrbits; 3073 u64 rmask; 3074 unsigned i; 3075 u32 npkts; 3076 3077 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { 3078 /* 3079 * This return value is not great, but we do not want the 3080 * interrupt core code to remove our interrupt handler 3081 * because we don't appear to be handling an interrupt 3082 * during a chip reset. 3083 */ 3084 ret = IRQ_HANDLED; 3085 goto bail; 3086 } 3087 3088 istat = qib_read_kreg64(dd, kr_intstatus); 3089 3090 if (unlikely(istat == ~0ULL)) { 3091 qib_bad_intrstatus(dd); 3092 qib_dev_err(dd, "Interrupt status all f's, skipping\n"); 3093 /* don't know if it was our interrupt or not */ 3094 ret = IRQ_NONE; 3095 goto bail; 3096 } 3097 3098 istat &= dd->cspec->main_int_mask; 3099 if (unlikely(!istat)) { 3100 /* already handled, or shared and not us */ 3101 ret = IRQ_NONE; 3102 goto bail; 3103 } 3104 3105 this_cpu_inc(*dd->int_counter); 3106 3107 /* handle "errors" of various kinds first, device ahead of port */ 3108 if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | 3109 QIB_I_C_ERROR | INT_MASK_P(Err, 0) | 3110 INT_MASK_P(Err, 1)))) 3111 unlikely_7322_intr(dd, istat); 3112 3113 /* 3114 * Clear the interrupt bits we found set, relatively early, so we 3115 * "know" know the chip will have seen this by the time we process 3116 * the queue, and will re-interrupt if necessary. The processor 3117 * itself won't take the interrupt again until we return. 3118 */ 3119 qib_write_kreg(dd, kr_intclear, istat); 3120 3121 /* 3122 * Handle kernel receive queues before checking for pio buffers 3123 * available since receives can overflow; piobuf waiters can afford 3124 * a few extra cycles, since they were waiting anyway. 3125 */ 3126 ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); 3127 if (ctxtrbits) { 3128 rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | 3129 (1ULL << QIB_I_RCVURG_LSB); 3130 for (i = 0; i < dd->first_user_ctxt; i++) { 3131 if (ctxtrbits & rmask) { 3132 ctxtrbits &= ~rmask; 3133 if (dd->rcd[i]) 3134 qib_kreceive(dd->rcd[i], NULL, &npkts); 3135 } 3136 rmask <<= 1; 3137 } 3138 if (ctxtrbits) { 3139 ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | 3140 (ctxtrbits >> QIB_I_RCVURG_LSB); 3141 qib_handle_urcv(dd, ctxtrbits); 3142 } 3143 } 3144 3145 if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) 3146 sdma_7322_intr(dd, istat); 3147 3148 if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) 3149 qib_ib_piobufavail(dd); 3150 3151 ret = IRQ_HANDLED; 3152 bail: 3153 return ret; 3154 } 3155 3156 /* 3157 * Dedicated receive packet available interrupt handler. 3158 */ 3159 static irqreturn_t qib_7322pintr(int irq, void *data) 3160 { 3161 struct qib_ctxtdata *rcd = data; 3162 struct qib_devdata *dd = rcd->dd; 3163 u32 npkts; 3164 3165 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3166 /* 3167 * This return value is not great, but we do not want the 3168 * interrupt core code to remove our interrupt handler 3169 * because we don't appear to be handling an interrupt 3170 * during a chip reset. 3171 */ 3172 return IRQ_HANDLED; 3173 3174 this_cpu_inc(*dd->int_counter); 3175 3176 /* Clear the interrupt bit we expect to be set. */ 3177 qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | 3178 (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); 3179 3180 qib_kreceive(rcd, NULL, &npkts); 3181 3182 return IRQ_HANDLED; 3183 } 3184 3185 /* 3186 * Dedicated Send buffer available interrupt handler. 3187 */ 3188 static irqreturn_t qib_7322bufavail(int irq, void *data) 3189 { 3190 struct qib_devdata *dd = data; 3191 3192 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3193 /* 3194 * This return value is not great, but we do not want the 3195 * interrupt core code to remove our interrupt handler 3196 * because we don't appear to be handling an interrupt 3197 * during a chip reset. 3198 */ 3199 return IRQ_HANDLED; 3200 3201 this_cpu_inc(*dd->int_counter); 3202 3203 /* Clear the interrupt bit we expect to be set. */ 3204 qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); 3205 3206 /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ 3207 if (dd->flags & QIB_INITTED) 3208 qib_ib_piobufavail(dd); 3209 else 3210 qib_wantpiobuf_7322_intr(dd, 0); 3211 3212 return IRQ_HANDLED; 3213 } 3214 3215 /* 3216 * Dedicated Send DMA interrupt handler. 3217 */ 3218 static irqreturn_t sdma_intr(int irq, void *data) 3219 { 3220 struct qib_pportdata *ppd = data; 3221 struct qib_devdata *dd = ppd->dd; 3222 3223 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3224 /* 3225 * This return value is not great, but we do not want the 3226 * interrupt core code to remove our interrupt handler 3227 * because we don't appear to be handling an interrupt 3228 * during a chip reset. 3229 */ 3230 return IRQ_HANDLED; 3231 3232 this_cpu_inc(*dd->int_counter); 3233 3234 /* Clear the interrupt bit we expect to be set. */ 3235 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3236 INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); 3237 qib_sdma_intr(ppd); 3238 3239 return IRQ_HANDLED; 3240 } 3241 3242 /* 3243 * Dedicated Send DMA idle interrupt handler. 3244 */ 3245 static irqreturn_t sdma_idle_intr(int irq, void *data) 3246 { 3247 struct qib_pportdata *ppd = data; 3248 struct qib_devdata *dd = ppd->dd; 3249 3250 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3251 /* 3252 * This return value is not great, but we do not want the 3253 * interrupt core code to remove our interrupt handler 3254 * because we don't appear to be handling an interrupt 3255 * during a chip reset. 3256 */ 3257 return IRQ_HANDLED; 3258 3259 this_cpu_inc(*dd->int_counter); 3260 3261 /* Clear the interrupt bit we expect to be set. */ 3262 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3263 INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); 3264 qib_sdma_intr(ppd); 3265 3266 return IRQ_HANDLED; 3267 } 3268 3269 /* 3270 * Dedicated Send DMA progress interrupt handler. 3271 */ 3272 static irqreturn_t sdma_progress_intr(int irq, void *data) 3273 { 3274 struct qib_pportdata *ppd = data; 3275 struct qib_devdata *dd = ppd->dd; 3276 3277 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3278 /* 3279 * This return value is not great, but we do not want the 3280 * interrupt core code to remove our interrupt handler 3281 * because we don't appear to be handling an interrupt 3282 * during a chip reset. 3283 */ 3284 return IRQ_HANDLED; 3285 3286 this_cpu_inc(*dd->int_counter); 3287 3288 /* Clear the interrupt bit we expect to be set. */ 3289 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3290 INT_MASK_P(SDmaProgress, 1) : 3291 INT_MASK_P(SDmaProgress, 0)); 3292 qib_sdma_intr(ppd); 3293 3294 return IRQ_HANDLED; 3295 } 3296 3297 /* 3298 * Dedicated Send DMA cleanup interrupt handler. 3299 */ 3300 static irqreturn_t sdma_cleanup_intr(int irq, void *data) 3301 { 3302 struct qib_pportdata *ppd = data; 3303 struct qib_devdata *dd = ppd->dd; 3304 3305 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) 3306 /* 3307 * This return value is not great, but we do not want the 3308 * interrupt core code to remove our interrupt handler 3309 * because we don't appear to be handling an interrupt 3310 * during a chip reset. 3311 */ 3312 return IRQ_HANDLED; 3313 3314 this_cpu_inc(*dd->int_counter); 3315 3316 /* Clear the interrupt bit we expect to be set. */ 3317 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? 3318 INT_MASK_PM(SDmaCleanupDone, 1) : 3319 INT_MASK_PM(SDmaCleanupDone, 0)); 3320 qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); 3321 3322 return IRQ_HANDLED; 3323 } 3324 3325 #ifdef CONFIG_INFINIBAND_QIB_DCA 3326 3327 static void reset_dca_notifier(struct qib_devdata *dd, int msixnum) 3328 { 3329 if (!dd->cspec->msix_entries[msixnum].dca) 3330 return; 3331 3332 qib_devinfo(dd->pcidev, "Disabling notifier on HCA %d irq %d\n", 3333 dd->unit, pci_irq_vector(dd->pcidev, msixnum)); 3334 irq_set_affinity_notifier(pci_irq_vector(dd->pcidev, msixnum), NULL); 3335 dd->cspec->msix_entries[msixnum].notifier = NULL; 3336 } 3337 3338 static void setup_dca_notifier(struct qib_devdata *dd, int msixnum) 3339 { 3340 struct qib_msix_entry *m = &dd->cspec->msix_entries[msixnum]; 3341 struct qib_irq_notify *n; 3342 3343 if (!m->dca) 3344 return; 3345 n = kzalloc(sizeof(*n), GFP_KERNEL); 3346 if (n) { 3347 int ret; 3348 3349 m->notifier = n; 3350 n->notify.irq = pci_irq_vector(dd->pcidev, msixnum); 3351 n->notify.notify = qib_irq_notifier_notify; 3352 n->notify.release = qib_irq_notifier_release; 3353 n->arg = m->arg; 3354 n->rcv = m->rcv; 3355 qib_devinfo(dd->pcidev, 3356 "set notifier irq %d rcv %d notify %p\n", 3357 n->notify.irq, n->rcv, &n->notify); 3358 ret = irq_set_affinity_notifier( 3359 n->notify.irq, 3360 &n->notify); 3361 if (ret) { 3362 m->notifier = NULL; 3363 kfree(n); 3364 } 3365 } 3366 } 3367 3368 #endif 3369 3370 /* 3371 * Set up our chip-specific interrupt handler. 3372 * The interrupt type has already been setup, so 3373 * we just need to do the registration and error checking. 3374 * If we are using MSIx interrupts, we may fall back to 3375 * INTx later, if the interrupt handler doesn't get called 3376 * within 1/2 second (see verify_interrupt()). 3377 */ 3378 static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) 3379 { 3380 int ret, i, msixnum; 3381 u64 redirect[6]; 3382 u64 mask; 3383 const struct cpumask *local_mask; 3384 int firstcpu, secondcpu = 0, currrcvcpu = 0; 3385 3386 if (!dd->num_pports) 3387 return; 3388 3389 if (clearpend) { 3390 /* 3391 * if not switching interrupt types, be sure interrupts are 3392 * disabled, and then clear anything pending at this point, 3393 * because we are starting clean. 3394 */ 3395 qib_7322_set_intr_state(dd, 0); 3396 3397 /* clear the reset error, init error/hwerror mask */ 3398 qib_7322_init_hwerrors(dd); 3399 3400 /* clear any interrupt bits that might be set */ 3401 qib_write_kreg(dd, kr_intclear, ~0ULL); 3402 3403 /* make sure no pending MSIx intr, and clear diag reg */ 3404 qib_write_kreg(dd, kr_intgranted, ~0ULL); 3405 qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); 3406 } 3407 3408 if (!dd->cspec->num_msix_entries) { 3409 /* Try to get INTx interrupt */ 3410 try_intx: 3411 ret = pci_request_irq(dd->pcidev, 0, qib_7322intr, NULL, dd, 3412 QIB_DRV_NAME); 3413 if (ret) { 3414 qib_dev_err( 3415 dd, 3416 "Couldn't setup INTx interrupt (irq=%d): %d\n", 3417 pci_irq_vector(dd->pcidev, 0), ret); 3418 return; 3419 } 3420 dd->cspec->main_int_mask = ~0ULL; 3421 return; 3422 } 3423 3424 /* Try to get MSIx interrupts */ 3425 memset(redirect, 0, sizeof(redirect)); 3426 mask = ~0ULL; 3427 msixnum = 0; 3428 local_mask = cpumask_of_pcibus(dd->pcidev->bus); 3429 firstcpu = cpumask_first(local_mask); 3430 if (firstcpu >= nr_cpu_ids || 3431 cpumask_weight(local_mask) == num_online_cpus()) { 3432 local_mask = topology_core_cpumask(0); 3433 firstcpu = cpumask_first(local_mask); 3434 } 3435 if (firstcpu < nr_cpu_ids) { 3436 secondcpu = cpumask_next(firstcpu, local_mask); 3437 if (secondcpu >= nr_cpu_ids) 3438 secondcpu = firstcpu; 3439 currrcvcpu = secondcpu; 3440 } 3441 for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { 3442 irq_handler_t handler; 3443 void *arg; 3444 int lsb, reg, sh; 3445 #ifdef CONFIG_INFINIBAND_QIB_DCA 3446 int dca = 0; 3447 #endif 3448 if (i < ARRAY_SIZE(irq_table)) { 3449 if (irq_table[i].port) { 3450 /* skip if for a non-configured port */ 3451 if (irq_table[i].port > dd->num_pports) 3452 continue; 3453 arg = dd->pport + irq_table[i].port - 1; 3454 } else 3455 arg = dd; 3456 #ifdef CONFIG_INFINIBAND_QIB_DCA 3457 dca = irq_table[i].dca; 3458 #endif 3459 lsb = irq_table[i].lsb; 3460 handler = irq_table[i].handler; 3461 ret = pci_request_irq(dd->pcidev, msixnum, handler, 3462 NULL, arg, QIB_DRV_NAME "%d%s", 3463 dd->unit, 3464 irq_table[i].name); 3465 } else { 3466 unsigned ctxt; 3467 3468 ctxt = i - ARRAY_SIZE(irq_table); 3469 /* per krcvq context receive interrupt */ 3470 arg = dd->rcd[ctxt]; 3471 if (!arg) 3472 continue; 3473 if (qib_krcvq01_no_msi && ctxt < 2) 3474 continue; 3475 #ifdef CONFIG_INFINIBAND_QIB_DCA 3476 dca = 1; 3477 #endif 3478 lsb = QIB_I_RCVAVAIL_LSB + ctxt; 3479 handler = qib_7322pintr; 3480 ret = pci_request_irq(dd->pcidev, msixnum, handler, 3481 NULL, arg, 3482 QIB_DRV_NAME "%d (kctx)", 3483 dd->unit); 3484 } 3485 3486 if (ret) { 3487 /* 3488 * Shouldn't happen since the enable said we could 3489 * have as many as we are trying to setup here. 3490 */ 3491 qib_dev_err(dd, 3492 "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n", 3493 msixnum, 3494 pci_irq_vector(dd->pcidev, msixnum), 3495 ret); 3496 qib_7322_free_irq(dd); 3497 pci_alloc_irq_vectors(dd->pcidev, 1, 1, 3498 PCI_IRQ_LEGACY); 3499 goto try_intx; 3500 } 3501 dd->cspec->msix_entries[msixnum].arg = arg; 3502 #ifdef CONFIG_INFINIBAND_QIB_DCA 3503 dd->cspec->msix_entries[msixnum].dca = dca; 3504 dd->cspec->msix_entries[msixnum].rcv = 3505 handler == qib_7322pintr; 3506 #endif 3507 if (lsb >= 0) { 3508 reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; 3509 sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * 3510 SYM_LSB(IntRedirect0, vec1); 3511 mask &= ~(1ULL << lsb); 3512 redirect[reg] |= ((u64) msixnum) << sh; 3513 } 3514 qib_read_kreg64(dd, 2 * msixnum + 1 + 3515 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3516 if (firstcpu < nr_cpu_ids && 3517 zalloc_cpumask_var( 3518 &dd->cspec->msix_entries[msixnum].mask, 3519 GFP_KERNEL)) { 3520 if (handler == qib_7322pintr) { 3521 cpumask_set_cpu(currrcvcpu, 3522 dd->cspec->msix_entries[msixnum].mask); 3523 currrcvcpu = cpumask_next(currrcvcpu, 3524 local_mask); 3525 if (currrcvcpu >= nr_cpu_ids) 3526 currrcvcpu = secondcpu; 3527 } else { 3528 cpumask_set_cpu(firstcpu, 3529 dd->cspec->msix_entries[msixnum].mask); 3530 } 3531 irq_set_affinity_hint( 3532 pci_irq_vector(dd->pcidev, msixnum), 3533 dd->cspec->msix_entries[msixnum].mask); 3534 } 3535 msixnum++; 3536 } 3537 /* Initialize the vector mapping */ 3538 for (i = 0; i < ARRAY_SIZE(redirect); i++) 3539 qib_write_kreg(dd, kr_intredirect + i, redirect[i]); 3540 dd->cspec->main_int_mask = mask; 3541 tasklet_init(&dd->error_tasklet, qib_error_tasklet, 3542 (unsigned long)dd); 3543 } 3544 3545 /** 3546 * qib_7322_boardname - fill in the board name and note features 3547 * @dd: the qlogic_ib device 3548 * 3549 * info will be based on the board revision register 3550 */ 3551 static unsigned qib_7322_boardname(struct qib_devdata *dd) 3552 { 3553 /* Will need enumeration of board-types here */ 3554 u32 boardid; 3555 unsigned int features = DUAL_PORT_CAP; 3556 3557 boardid = SYM_FIELD(dd->revision, Revision, BoardID); 3558 3559 switch (boardid) { 3560 case 0: 3561 dd->boardname = "InfiniPath_QLE7342_Emulation"; 3562 break; 3563 case 1: 3564 dd->boardname = "InfiniPath_QLE7340"; 3565 dd->flags |= QIB_HAS_QSFP; 3566 features = PORT_SPD_CAP; 3567 break; 3568 case 2: 3569 dd->boardname = "InfiniPath_QLE7342"; 3570 dd->flags |= QIB_HAS_QSFP; 3571 break; 3572 case 3: 3573 dd->boardname = "InfiniPath_QMI7342"; 3574 break; 3575 case 4: 3576 dd->boardname = "InfiniPath_Unsupported7342"; 3577 qib_dev_err(dd, "Unsupported version of QMH7342\n"); 3578 features = 0; 3579 break; 3580 case BOARD_QMH7342: 3581 dd->boardname = "InfiniPath_QMH7342"; 3582 features = 0x24; 3583 break; 3584 case BOARD_QME7342: 3585 dd->boardname = "InfiniPath_QME7342"; 3586 break; 3587 case 8: 3588 dd->boardname = "InfiniPath_QME7362"; 3589 dd->flags |= QIB_HAS_QSFP; 3590 break; 3591 case BOARD_QMH7360: 3592 dd->boardname = "Intel IB QDR 1P FLR-QSFP Adptr"; 3593 dd->flags |= QIB_HAS_QSFP; 3594 break; 3595 case 15: 3596 dd->boardname = "InfiniPath_QLE7342_TEST"; 3597 dd->flags |= QIB_HAS_QSFP; 3598 break; 3599 default: 3600 dd->boardname = "InfiniPath_QLE73xy_UNKNOWN"; 3601 qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); 3602 break; 3603 } 3604 dd->board_atten = 1; /* index into txdds_Xdr */ 3605 3606 snprintf(dd->boardversion, sizeof(dd->boardversion), 3607 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", 3608 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, 3609 (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch), 3610 dd->majrev, dd->minrev, 3611 (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW)); 3612 3613 if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { 3614 qib_devinfo(dd->pcidev, 3615 "IB%u: Forced to single port mode by module parameter\n", 3616 dd->unit); 3617 features &= PORT_SPD_CAP; 3618 } 3619 3620 return features; 3621 } 3622 3623 /* 3624 * This routine sleeps, so it can only be called from user context, not 3625 * from interrupt context. 3626 */ 3627 static int qib_do_7322_reset(struct qib_devdata *dd) 3628 { 3629 u64 val; 3630 u64 *msix_vecsave = NULL; 3631 int i, msix_entries, ret = 1; 3632 u16 cmdval; 3633 u8 int_line, clinesz; 3634 unsigned long flags; 3635 3636 /* Use dev_err so it shows up in logs, etc. */ 3637 qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); 3638 3639 qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); 3640 3641 msix_entries = dd->cspec->num_msix_entries; 3642 3643 /* no interrupts till re-initted */ 3644 qib_7322_set_intr_state(dd, 0); 3645 3646 qib_7322_free_irq(dd); 3647 3648 if (msix_entries) { 3649 /* can be up to 512 bytes, too big for stack */ 3650 msix_vecsave = kmalloc_array(2 * dd->cspec->num_msix_entries, 3651 sizeof(u64), 3652 GFP_KERNEL); 3653 } 3654 3655 /* 3656 * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector 3657 * info that is set up by the BIOS, so we have to save and restore 3658 * it ourselves. There is some risk something could change it, 3659 * after we save it, but since we have disabled the MSIx, it 3660 * shouldn't be touched... 3661 */ 3662 for (i = 0; i < msix_entries; i++) { 3663 u64 vecaddr, vecdata; 3664 3665 vecaddr = qib_read_kreg64(dd, 2 * i + 3666 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3667 vecdata = qib_read_kreg64(dd, 1 + 2 * i + 3668 (QIB_7322_MsixTable_OFFS / sizeof(u64))); 3669 if (msix_vecsave) { 3670 msix_vecsave[2 * i] = vecaddr; 3671 /* save it without the masked bit set */ 3672 msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; 3673 } 3674 } 3675 3676 dd->pport->cpspec->ibdeltainprog = 0; 3677 dd->pport->cpspec->ibsymdelta = 0; 3678 dd->pport->cpspec->iblnkerrdelta = 0; 3679 dd->pport->cpspec->ibmalfdelta = 0; 3680 /* so we check interrupts work again */ 3681 dd->z_int_counter = qib_int_counter(dd); 3682 3683 /* 3684 * Keep chip from being accessed until we are ready. Use 3685 * writeq() directly, to allow the write even though QIB_PRESENT 3686 * isn't set. 3687 */ 3688 dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); 3689 dd->flags |= QIB_DOING_RESET; 3690 val = dd->control | QLOGIC_IB_C_RESET; 3691 writeq(val, &dd->kregbase[kr_control]); 3692 3693 for (i = 1; i <= 5; i++) { 3694 /* 3695 * Allow MBIST, etc. to complete; longer on each retry. 3696 * We sometimes get machine checks from bus timeout if no 3697 * response, so for now, make it *really* long. 3698 */ 3699 msleep(1000 + (1 + i) * 3000); 3700 3701 qib_pcie_reenable(dd, cmdval, int_line, clinesz); 3702 3703 /* 3704 * Use readq directly, so we don't need to mark it as PRESENT 3705 * until we get a successful indication that all is well. 3706 */ 3707 val = readq(&dd->kregbase[kr_revision]); 3708 if (val == dd->revision) 3709 break; 3710 if (i == 5) { 3711 qib_dev_err(dd, 3712 "Failed to initialize after reset, unusable\n"); 3713 ret = 0; 3714 goto bail; 3715 } 3716 } 3717 3718 dd->flags |= QIB_PRESENT; /* it's back */ 3719 3720 if (msix_entries) { 3721 /* restore the MSIx vector address and data if saved above */ 3722 for (i = 0; i < msix_entries; i++) { 3723 if (!msix_vecsave || !msix_vecsave[2 * i]) 3724 continue; 3725 qib_write_kreg(dd, 2 * i + 3726 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3727 msix_vecsave[2 * i]); 3728 qib_write_kreg(dd, 1 + 2 * i + 3729 (QIB_7322_MsixTable_OFFS / sizeof(u64)), 3730 msix_vecsave[1 + 2 * i]); 3731 } 3732 } 3733 3734 /* initialize the remaining registers. */ 3735 for (i = 0; i < dd->num_pports; ++i) 3736 write_7322_init_portregs(&dd->pport[i]); 3737 write_7322_initregs(dd); 3738 3739 if (qib_pcie_params(dd, dd->lbus_width, &msix_entries)) 3740 qib_dev_err(dd, 3741 "Reset failed to setup PCIe or interrupts; continuing anyway\n"); 3742 3743 dd->cspec->num_msix_entries = msix_entries; 3744 qib_setup_7322_interrupt(dd, 1); 3745 3746 for (i = 0; i < dd->num_pports; ++i) { 3747 struct qib_pportdata *ppd = &dd->pport[i]; 3748 3749 spin_lock_irqsave(&ppd->lflags_lock, flags); 3750 ppd->lflags |= QIBL_IB_FORCE_NOTIFY; 3751 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 3752 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 3753 } 3754 3755 bail: 3756 dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ 3757 kfree(msix_vecsave); 3758 return ret; 3759 } 3760 3761 /** 3762 * qib_7322_put_tid - write a TID to the chip 3763 * @dd: the qlogic_ib device 3764 * @tidptr: pointer to the expected TID (in chip) to update 3765 * @tidtype: 0 for eager, 1 for expected 3766 * @pa: physical address of in memory buffer; tidinvalid if freeing 3767 */ 3768 static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, 3769 u32 type, unsigned long pa) 3770 { 3771 if (!(dd->flags & QIB_PRESENT)) 3772 return; 3773 if (pa != dd->tidinvalid) { 3774 u64 chippa = pa >> IBA7322_TID_PA_SHIFT; 3775 3776 /* paranoia checks */ 3777 if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { 3778 qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", 3779 pa); 3780 return; 3781 } 3782 if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { 3783 qib_dev_err(dd, 3784 "Physical page address 0x%lx larger than supported\n", 3785 pa); 3786 return; 3787 } 3788 3789 if (type == RCVHQ_RCV_TYPE_EAGER) 3790 chippa |= dd->tidtemplate; 3791 else /* for now, always full 4KB page */ 3792 chippa |= IBA7322_TID_SZ_4K; 3793 pa = chippa; 3794 } 3795 writeq(pa, tidptr); 3796 } 3797 3798 /** 3799 * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager 3800 * @dd: the qlogic_ib device 3801 * @ctxt: the ctxt 3802 * 3803 * clear all TID entries for a ctxt, expected and eager. 3804 * Used from qib_close(). 3805 */ 3806 static void qib_7322_clear_tids(struct qib_devdata *dd, 3807 struct qib_ctxtdata *rcd) 3808 { 3809 u64 __iomem *tidbase; 3810 unsigned long tidinv; 3811 u32 ctxt; 3812 int i; 3813 3814 if (!dd->kregbase || !rcd) 3815 return; 3816 3817 ctxt = rcd->ctxt; 3818 3819 tidinv = dd->tidinvalid; 3820 tidbase = (u64 __iomem *) 3821 ((char __iomem *) dd->kregbase + 3822 dd->rcvtidbase + 3823 ctxt * dd->rcvtidcnt * sizeof(*tidbase)); 3824 3825 for (i = 0; i < dd->rcvtidcnt; i++) 3826 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, 3827 tidinv); 3828 3829 tidbase = (u64 __iomem *) 3830 ((char __iomem *) dd->kregbase + 3831 dd->rcvegrbase + 3832 rcd->rcvegr_tid_base * sizeof(*tidbase)); 3833 3834 for (i = 0; i < rcd->rcvegrcnt; i++) 3835 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, 3836 tidinv); 3837 } 3838 3839 /** 3840 * qib_7322_tidtemplate - setup constants for TID updates 3841 * @dd: the qlogic_ib device 3842 * 3843 * We setup stuff that we use a lot, to avoid calculating each time 3844 */ 3845 static void qib_7322_tidtemplate(struct qib_devdata *dd) 3846 { 3847 /* 3848 * For now, we always allocate 4KB buffers (at init) so we can 3849 * receive max size packets. We may want a module parameter to 3850 * specify 2KB or 4KB and/or make it per port instead of per device 3851 * for those who want to reduce memory footprint. Note that the 3852 * rcvhdrentsize size must be large enough to hold the largest 3853 * IB header (currently 96 bytes) that we expect to handle (plus of 3854 * course the 2 dwords of RHF). 3855 */ 3856 if (dd->rcvegrbufsize == 2048) 3857 dd->tidtemplate = IBA7322_TID_SZ_2K; 3858 else if (dd->rcvegrbufsize == 4096) 3859 dd->tidtemplate = IBA7322_TID_SZ_4K; 3860 dd->tidinvalid = 0; 3861 } 3862 3863 /** 3864 * qib_init_7322_get_base_info - set chip-specific flags for user code 3865 * @rcd: the qlogic_ib ctxt 3866 * @kbase: qib_base_info pointer 3867 * 3868 * We set the PCIE flag because the lower bandwidth on PCIe vs 3869 * HyperTransport can affect some user packet algorithims. 3870 */ 3871 3872 static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, 3873 struct qib_base_info *kinfo) 3874 { 3875 kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | 3876 QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | 3877 QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; 3878 if (rcd->dd->cspec->r1) 3879 kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; 3880 if (rcd->dd->flags & QIB_USE_SPCL_TRIG) 3881 kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; 3882 3883 return 0; 3884 } 3885 3886 static struct qib_message_header * 3887 qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) 3888 { 3889 u32 offset = qib_hdrget_offset(rhf_addr); 3890 3891 return (struct qib_message_header *) 3892 (rhf_addr - dd->rhf_offset + offset); 3893 } 3894 3895 /* 3896 * Configure number of contexts. 3897 */ 3898 static void qib_7322_config_ctxts(struct qib_devdata *dd) 3899 { 3900 unsigned long flags; 3901 u32 nchipctxts; 3902 3903 nchipctxts = qib_read_kreg32(dd, kr_contextcnt); 3904 dd->cspec->numctxts = nchipctxts; 3905 if (qib_n_krcv_queues > 1 && dd->num_pports) { 3906 dd->first_user_ctxt = NUM_IB_PORTS + 3907 (qib_n_krcv_queues - 1) * dd->num_pports; 3908 if (dd->first_user_ctxt > nchipctxts) 3909 dd->first_user_ctxt = nchipctxts; 3910 dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; 3911 } else { 3912 dd->first_user_ctxt = NUM_IB_PORTS; 3913 dd->n_krcv_queues = 1; 3914 } 3915 3916 if (!qib_cfgctxts) { 3917 int nctxts = dd->first_user_ctxt + num_online_cpus(); 3918 3919 if (nctxts <= 6) 3920 dd->ctxtcnt = 6; 3921 else if (nctxts <= 10) 3922 dd->ctxtcnt = 10; 3923 else if (nctxts <= nchipctxts) 3924 dd->ctxtcnt = nchipctxts; 3925 } else if (qib_cfgctxts < dd->num_pports) 3926 dd->ctxtcnt = dd->num_pports; 3927 else if (qib_cfgctxts <= nchipctxts) 3928 dd->ctxtcnt = qib_cfgctxts; 3929 if (!dd->ctxtcnt) /* none of the above, set to max */ 3930 dd->ctxtcnt = nchipctxts; 3931 3932 /* 3933 * Chip can be configured for 6, 10, or 18 ctxts, and choice 3934 * affects number of eager TIDs per ctxt (1K, 2K, 4K). 3935 * Lock to be paranoid about later motion, etc. 3936 */ 3937 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 3938 if (dd->ctxtcnt > 10) 3939 dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); 3940 else if (dd->ctxtcnt > 6) 3941 dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); 3942 /* else configure for default 6 receive ctxts */ 3943 3944 /* The XRC opcode is 5. */ 3945 dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); 3946 3947 /* 3948 * RcvCtrl *must* be written here so that the 3949 * chip understands how to change rcvegrcnt below. 3950 */ 3951 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 3952 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 3953 3954 /* kr_rcvegrcnt changes based on the number of contexts enabled */ 3955 dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); 3956 if (qib_rcvhdrcnt) 3957 dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt); 3958 else 3959 dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt, 3960 dd->num_pports > 1 ? 1024U : 2048U); 3961 } 3962 3963 static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) 3964 { 3965 3966 int lsb, ret = 0; 3967 u64 maskr; /* right-justified mask */ 3968 3969 switch (which) { 3970 3971 case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ 3972 ret = ppd->link_width_enabled; 3973 goto done; 3974 3975 case QIB_IB_CFG_LWID: /* Get currently active Link-width */ 3976 ret = ppd->link_width_active; 3977 goto done; 3978 3979 case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ 3980 ret = ppd->link_speed_enabled; 3981 goto done; 3982 3983 case QIB_IB_CFG_SPD: /* Get current Link spd */ 3984 ret = ppd->link_speed_active; 3985 goto done; 3986 3987 case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ 3988 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 3989 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 3990 break; 3991 3992 case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ 3993 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 3994 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 3995 break; 3996 3997 case QIB_IB_CFG_LINKLATENCY: 3998 ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 3999 SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); 4000 goto done; 4001 4002 case QIB_IB_CFG_OP_VLS: 4003 ret = ppd->vls_operational; 4004 goto done; 4005 4006 case QIB_IB_CFG_VL_HIGH_CAP: 4007 ret = 16; 4008 goto done; 4009 4010 case QIB_IB_CFG_VL_LOW_CAP: 4011 ret = 16; 4012 goto done; 4013 4014 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4015 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4016 OverrunThreshold); 4017 goto done; 4018 4019 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4020 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4021 PhyerrThreshold); 4022 goto done; 4023 4024 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4025 /* will only take effect when the link state changes */ 4026 ret = (ppd->cpspec->ibcctrl_a & 4027 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? 4028 IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; 4029 goto done; 4030 4031 case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ 4032 lsb = IBA7322_IBC_HRTBT_LSB; 4033 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4034 break; 4035 4036 case QIB_IB_CFG_PMA_TICKS: 4037 /* 4038 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs 4039 * Since the clock is always 250MHz, the value is 3, 1 or 0. 4040 */ 4041 if (ppd->link_speed_active == QIB_IB_QDR) 4042 ret = 3; 4043 else if (ppd->link_speed_active == QIB_IB_DDR) 4044 ret = 1; 4045 else 4046 ret = 0; 4047 goto done; 4048 4049 default: 4050 ret = -EINVAL; 4051 goto done; 4052 } 4053 ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); 4054 done: 4055 return ret; 4056 } 4057 4058 /* 4059 * Below again cribbed liberally from older version. Do not lean 4060 * heavily on it. 4061 */ 4062 #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB 4063 #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ 4064 | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) 4065 4066 static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) 4067 { 4068 struct qib_devdata *dd = ppd->dd; 4069 u64 maskr; /* right-justified mask */ 4070 int lsb, ret = 0; 4071 u16 lcmd, licmd; 4072 unsigned long flags; 4073 4074 switch (which) { 4075 case QIB_IB_CFG_LIDLMC: 4076 /* 4077 * Set LID and LMC. Combined to avoid possible hazard 4078 * caller puts LMC in 16MSbits, DLID in 16LSbits of val 4079 */ 4080 lsb = IBA7322_IBC_DLIDLMC_SHIFT; 4081 maskr = IBA7322_IBC_DLIDLMC_MASK; 4082 /* 4083 * For header-checking, the SLID in the packet will 4084 * be masked with SendIBSLMCMask, and compared 4085 * with SendIBSLIDAssignMask. Make sure we do not 4086 * set any bits not covered by the mask, or we get 4087 * false-positives. 4088 */ 4089 qib_write_kreg_port(ppd, krp_sendslid, 4090 val & (val >> 16) & SendIBSLIDAssignMask); 4091 qib_write_kreg_port(ppd, krp_sendslidmask, 4092 (val >> 16) & SendIBSLMCMask); 4093 break; 4094 4095 case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ 4096 ppd->link_width_enabled = val; 4097 /* convert IB value to chip register value */ 4098 if (val == IB_WIDTH_1X) 4099 val = 0; 4100 else if (val == IB_WIDTH_4X) 4101 val = 1; 4102 else 4103 val = 3; 4104 maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); 4105 lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); 4106 break; 4107 4108 case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ 4109 /* 4110 * As with width, only write the actual register if the 4111 * link is currently down, otherwise takes effect on next 4112 * link change. Since setting is being explicitly requested 4113 * (via MAD or sysfs), clear autoneg failure status if speed 4114 * autoneg is enabled. 4115 */ 4116 ppd->link_speed_enabled = val; 4117 val <<= IBA7322_IBC_SPEED_LSB; 4118 maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | 4119 IBA7322_IBC_MAX_SPEED_MASK; 4120 if (val & (val - 1)) { 4121 /* Muliple speeds enabled */ 4122 val |= IBA7322_IBC_IBTA_1_2_MASK | 4123 IBA7322_IBC_MAX_SPEED_MASK; 4124 spin_lock_irqsave(&ppd->lflags_lock, flags); 4125 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 4126 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 4127 } else if (val & IBA7322_IBC_SPEED_QDR) 4128 val |= IBA7322_IBC_IBTA_1_2_MASK; 4129 /* IBTA 1.2 mode + min/max + speed bits are contiguous */ 4130 lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); 4131 break; 4132 4133 case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ 4134 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4135 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); 4136 break; 4137 4138 case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ 4139 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4140 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); 4141 break; 4142 4143 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ 4144 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4145 OverrunThreshold); 4146 if (maskr != val) { 4147 ppd->cpspec->ibcctrl_a &= 4148 ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); 4149 ppd->cpspec->ibcctrl_a |= (u64) val << 4150 SYM_LSB(IBCCtrlA_0, OverrunThreshold); 4151 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4152 ppd->cpspec->ibcctrl_a); 4153 qib_write_kreg(dd, kr_scratch, 0ULL); 4154 } 4155 goto bail; 4156 4157 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ 4158 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, 4159 PhyerrThreshold); 4160 if (maskr != val) { 4161 ppd->cpspec->ibcctrl_a &= 4162 ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); 4163 ppd->cpspec->ibcctrl_a |= (u64) val << 4164 SYM_LSB(IBCCtrlA_0, PhyerrThreshold); 4165 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4166 ppd->cpspec->ibcctrl_a); 4167 qib_write_kreg(dd, kr_scratch, 0ULL); 4168 } 4169 goto bail; 4170 4171 case QIB_IB_CFG_PKEYS: /* update pkeys */ 4172 maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | 4173 ((u64) ppd->pkeys[2] << 32) | 4174 ((u64) ppd->pkeys[3] << 48); 4175 qib_write_kreg_port(ppd, krp_partitionkey, maskr); 4176 goto bail; 4177 4178 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ 4179 /* will only take effect when the link state changes */ 4180 if (val == IB_LINKINITCMD_POLL) 4181 ppd->cpspec->ibcctrl_a &= 4182 ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4183 else /* SLEEP */ 4184 ppd->cpspec->ibcctrl_a |= 4185 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); 4186 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 4187 qib_write_kreg(dd, kr_scratch, 0ULL); 4188 goto bail; 4189 4190 case QIB_IB_CFG_MTU: /* update the MTU in IBC */ 4191 /* 4192 * Update our housekeeping variables, and set IBC max 4193 * size, same as init code; max IBC is max we allow in 4194 * buffer, less the qword pbc, plus 1 for ICRC, in dwords 4195 * Set even if it's unchanged, print debug message only 4196 * on changes. 4197 */ 4198 val = (ppd->ibmaxlen >> 2) + 1; 4199 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); 4200 ppd->cpspec->ibcctrl_a |= (u64)val << 4201 SYM_LSB(IBCCtrlA_0, MaxPktLen); 4202 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4203 ppd->cpspec->ibcctrl_a); 4204 qib_write_kreg(dd, kr_scratch, 0ULL); 4205 goto bail; 4206 4207 case QIB_IB_CFG_LSTATE: /* set the IB link state */ 4208 switch (val & 0xffff0000) { 4209 case IB_LINKCMD_DOWN: 4210 lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; 4211 ppd->cpspec->ibmalfusesnap = 1; 4212 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 4213 crp_errlink); 4214 if (!ppd->cpspec->ibdeltainprog && 4215 qib_compat_ddr_negotiate) { 4216 ppd->cpspec->ibdeltainprog = 1; 4217 ppd->cpspec->ibsymsnap = 4218 read_7322_creg32_port(ppd, 4219 crp_ibsymbolerr); 4220 ppd->cpspec->iblnkerrsnap = 4221 read_7322_creg32_port(ppd, 4222 crp_iblinkerrrecov); 4223 } 4224 break; 4225 4226 case IB_LINKCMD_ARMED: 4227 lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; 4228 if (ppd->cpspec->ibmalfusesnap) { 4229 ppd->cpspec->ibmalfusesnap = 0; 4230 ppd->cpspec->ibmalfdelta += 4231 read_7322_creg32_port(ppd, 4232 crp_errlink) - 4233 ppd->cpspec->ibmalfsnap; 4234 } 4235 break; 4236 4237 case IB_LINKCMD_ACTIVE: 4238 lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; 4239 break; 4240 4241 default: 4242 ret = -EINVAL; 4243 qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); 4244 goto bail; 4245 } 4246 switch (val & 0xffff) { 4247 case IB_LINKINITCMD_NOP: 4248 licmd = 0; 4249 break; 4250 4251 case IB_LINKINITCMD_POLL: 4252 licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; 4253 break; 4254 4255 case IB_LINKINITCMD_SLEEP: 4256 licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; 4257 break; 4258 4259 case IB_LINKINITCMD_DISABLE: 4260 licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; 4261 ppd->cpspec->chase_end = 0; 4262 /* 4263 * stop state chase counter and timer, if running. 4264 * wait forpending timer, but don't clear .data (ppd)! 4265 */ 4266 if (ppd->cpspec->chase_timer.expires) { 4267 del_timer_sync(&ppd->cpspec->chase_timer); 4268 ppd->cpspec->chase_timer.expires = 0; 4269 } 4270 break; 4271 4272 default: 4273 ret = -EINVAL; 4274 qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", 4275 val & 0xffff); 4276 goto bail; 4277 } 4278 qib_set_ib_7322_lstate(ppd, lcmd, licmd); 4279 goto bail; 4280 4281 case QIB_IB_CFG_OP_VLS: 4282 if (ppd->vls_operational != val) { 4283 ppd->vls_operational = val; 4284 set_vls(ppd); 4285 } 4286 goto bail; 4287 4288 case QIB_IB_CFG_VL_HIGH_LIMIT: 4289 qib_write_kreg_port(ppd, krp_highprio_limit, val); 4290 goto bail; 4291 4292 case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ 4293 if (val > 3) { 4294 ret = -EINVAL; 4295 goto bail; 4296 } 4297 lsb = IBA7322_IBC_HRTBT_LSB; 4298 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ 4299 break; 4300 4301 case QIB_IB_CFG_PORT: 4302 /* val is the port number of the switch we are connected to. */ 4303 if (ppd->dd->cspec->r1) { 4304 cancel_delayed_work(&ppd->cpspec->ipg_work); 4305 ppd->cpspec->ipg_tries = 0; 4306 } 4307 goto bail; 4308 4309 default: 4310 ret = -EINVAL; 4311 goto bail; 4312 } 4313 ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); 4314 ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); 4315 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 4316 qib_write_kreg(dd, kr_scratch, 0); 4317 bail: 4318 return ret; 4319 } 4320 4321 static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) 4322 { 4323 int ret = 0; 4324 u64 val, ctrlb; 4325 4326 /* only IBC loopback, may add serdes and xgxs loopbacks later */ 4327 if (!strncmp(what, "ibc", 3)) { 4328 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, 4329 Loopback); 4330 val = 0; /* disable heart beat, so link will come up */ 4331 qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", 4332 ppd->dd->unit, ppd->port); 4333 } else if (!strncmp(what, "off", 3)) { 4334 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, 4335 Loopback); 4336 /* enable heart beat again */ 4337 val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; 4338 qib_devinfo(ppd->dd->pcidev, 4339 "Disabling IB%u:%u IBC loopback (normal)\n", 4340 ppd->dd->unit, ppd->port); 4341 } else 4342 ret = -EINVAL; 4343 if (!ret) { 4344 qib_write_kreg_port(ppd, krp_ibcctrl_a, 4345 ppd->cpspec->ibcctrl_a); 4346 ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK 4347 << IBA7322_IBC_HRTBT_LSB); 4348 ppd->cpspec->ibcctrl_b = ctrlb | val; 4349 qib_write_kreg_port(ppd, krp_ibcctrl_b, 4350 ppd->cpspec->ibcctrl_b); 4351 qib_write_kreg(ppd->dd, kr_scratch, 0); 4352 } 4353 return ret; 4354 } 4355 4356 static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4357 struct ib_vl_weight_elem *vl) 4358 { 4359 unsigned i; 4360 4361 for (i = 0; i < 16; i++, regno++, vl++) { 4362 u32 val = qib_read_kreg_port(ppd, regno); 4363 4364 vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & 4365 SYM_RMASK(LowPriority0_0, VirtualLane); 4366 vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & 4367 SYM_RMASK(LowPriority0_0, Weight); 4368 } 4369 } 4370 4371 static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, 4372 struct ib_vl_weight_elem *vl) 4373 { 4374 unsigned i; 4375 4376 for (i = 0; i < 16; i++, regno++, vl++) { 4377 u64 val; 4378 4379 val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << 4380 SYM_LSB(LowPriority0_0, VirtualLane)) | 4381 ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << 4382 SYM_LSB(LowPriority0_0, Weight)); 4383 qib_write_kreg_port(ppd, regno, val); 4384 } 4385 if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { 4386 struct qib_devdata *dd = ppd->dd; 4387 unsigned long flags; 4388 4389 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4390 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); 4391 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4392 qib_write_kreg(dd, kr_scratch, 0); 4393 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4394 } 4395 } 4396 4397 static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) 4398 { 4399 switch (which) { 4400 case QIB_IB_TBL_VL_HIGH_ARB: 4401 get_vl_weights(ppd, krp_highprio_0, t); 4402 break; 4403 4404 case QIB_IB_TBL_VL_LOW_ARB: 4405 get_vl_weights(ppd, krp_lowprio_0, t); 4406 break; 4407 4408 default: 4409 return -EINVAL; 4410 } 4411 return 0; 4412 } 4413 4414 static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) 4415 { 4416 switch (which) { 4417 case QIB_IB_TBL_VL_HIGH_ARB: 4418 set_vl_weights(ppd, krp_highprio_0, t); 4419 break; 4420 4421 case QIB_IB_TBL_VL_LOW_ARB: 4422 set_vl_weights(ppd, krp_lowprio_0, t); 4423 break; 4424 4425 default: 4426 return -EINVAL; 4427 } 4428 return 0; 4429 } 4430 4431 static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, 4432 u32 updegr, u32 egrhd, u32 npkts) 4433 { 4434 /* 4435 * Need to write timeout register before updating rcvhdrhead to ensure 4436 * that the timer is enabled on reception of a packet. 4437 */ 4438 if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT) 4439 adjust_rcv_timeout(rcd, npkts); 4440 if (updegr) 4441 qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); 4442 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4443 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); 4444 } 4445 4446 static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) 4447 { 4448 u32 head, tail; 4449 4450 head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); 4451 if (rcd->rcvhdrtail_kvaddr) 4452 tail = qib_get_rcvhdrtail(rcd); 4453 else 4454 tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); 4455 return head == tail; 4456 } 4457 4458 #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4459 QIB_RCVCTRL_CTXT_DIS | \ 4460 QIB_RCVCTRL_TIDFLOW_ENB | \ 4461 QIB_RCVCTRL_TIDFLOW_DIS | \ 4462 QIB_RCVCTRL_TAILUPD_ENB | \ 4463 QIB_RCVCTRL_TAILUPD_DIS | \ 4464 QIB_RCVCTRL_INTRAVAIL_ENB | \ 4465 QIB_RCVCTRL_INTRAVAIL_DIS | \ 4466 QIB_RCVCTRL_BP_ENB | \ 4467 QIB_RCVCTRL_BP_DIS) 4468 4469 #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ 4470 QIB_RCVCTRL_CTXT_DIS | \ 4471 QIB_RCVCTRL_PKEY_DIS | \ 4472 QIB_RCVCTRL_PKEY_ENB) 4473 4474 /* 4475 * Modify the RCVCTRL register in chip-specific way. This 4476 * is a function because bit positions and (future) register 4477 * location is chip-specifc, but the needed operations are 4478 * generic. <op> is a bit-mask because we often want to 4479 * do multiple modifications. 4480 */ 4481 static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, 4482 int ctxt) 4483 { 4484 struct qib_devdata *dd = ppd->dd; 4485 struct qib_ctxtdata *rcd; 4486 u64 mask, val; 4487 unsigned long flags; 4488 4489 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 4490 4491 if (op & QIB_RCVCTRL_TIDFLOW_ENB) 4492 dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); 4493 if (op & QIB_RCVCTRL_TIDFLOW_DIS) 4494 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); 4495 if (op & QIB_RCVCTRL_TAILUPD_ENB) 4496 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4497 if (op & QIB_RCVCTRL_TAILUPD_DIS) 4498 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); 4499 if (op & QIB_RCVCTRL_PKEY_ENB) 4500 ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4501 if (op & QIB_RCVCTRL_PKEY_DIS) 4502 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); 4503 if (ctxt < 0) { 4504 mask = (1ULL << dd->ctxtcnt) - 1; 4505 rcd = NULL; 4506 } else { 4507 mask = (1ULL << ctxt); 4508 rcd = dd->rcd[ctxt]; 4509 } 4510 if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { 4511 ppd->p_rcvctrl |= 4512 (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4513 if (!(dd->flags & QIB_NODMA_RTAIL)) { 4514 op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ 4515 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); 4516 } 4517 /* Write these registers before the context is enabled. */ 4518 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 4519 rcd->rcvhdrqtailaddr_phys); 4520 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 4521 rcd->rcvhdrq_phys); 4522 rcd->seq_cnt = 1; 4523 } 4524 if (op & QIB_RCVCTRL_CTXT_DIS) 4525 ppd->p_rcvctrl &= 4526 ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); 4527 if (op & QIB_RCVCTRL_BP_ENB) 4528 dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); 4529 if (op & QIB_RCVCTRL_BP_DIS) 4530 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); 4531 if (op & QIB_RCVCTRL_INTRAVAIL_ENB) 4532 dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); 4533 if (op & QIB_RCVCTRL_INTRAVAIL_DIS) 4534 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); 4535 /* 4536 * Decide which registers to write depending on the ops enabled. 4537 * Special case is "flush" (no bits set at all) 4538 * which needs to write both. 4539 */ 4540 if (op == 0 || (op & RCVCTRL_COMMON_MODS)) 4541 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); 4542 if (op == 0 || (op & RCVCTRL_PORT_MODS)) 4543 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); 4544 if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { 4545 /* 4546 * Init the context registers also; if we were 4547 * disabled, tail and head should both be zero 4548 * already from the enable, but since we don't 4549 * know, we have to do it explicitly. 4550 */ 4551 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); 4552 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); 4553 4554 /* be sure enabling write seen; hd/tl should be 0 */ 4555 (void) qib_read_kreg32(dd, kr_scratch); 4556 val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); 4557 dd->rcd[ctxt]->head = val; 4558 /* If kctxt, interrupt on next receive. */ 4559 if (ctxt < dd->first_user_ctxt) 4560 val |= dd->rhdrhead_intr_off; 4561 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4562 } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && 4563 dd->rcd[ctxt] && dd->rhdrhead_intr_off) { 4564 /* arm rcv interrupt */ 4565 val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; 4566 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); 4567 } 4568 if (op & QIB_RCVCTRL_CTXT_DIS) { 4569 unsigned f; 4570 4571 /* Now that the context is disabled, clear these registers. */ 4572 if (ctxt >= 0) { 4573 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); 4574 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); 4575 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4576 qib_write_ureg(dd, ur_rcvflowtable + f, 4577 TIDFLOW_ERRBITS, ctxt); 4578 } else { 4579 unsigned i; 4580 4581 for (i = 0; i < dd->cfgctxts; i++) { 4582 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, 4583 i, 0); 4584 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); 4585 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) 4586 qib_write_ureg(dd, ur_rcvflowtable + f, 4587 TIDFLOW_ERRBITS, i); 4588 } 4589 } 4590 } 4591 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 4592 } 4593 4594 /* 4595 * Modify the SENDCTRL register in chip-specific way. This 4596 * is a function where there are multiple such registers with 4597 * slightly different layouts. 4598 * The chip doesn't allow back-to-back sendctrl writes, so write 4599 * the scratch register after writing sendctrl. 4600 * 4601 * Which register is written depends on the operation. 4602 * Most operate on the common register, while 4603 * SEND_ENB and SEND_DIS operate on the per-port ones. 4604 * SEND_ENB is included in common because it can change SPCL_TRIG 4605 */ 4606 #define SENDCTRL_COMMON_MODS (\ 4607 QIB_SENDCTRL_CLEAR | \ 4608 QIB_SENDCTRL_AVAIL_DIS | \ 4609 QIB_SENDCTRL_AVAIL_ENB | \ 4610 QIB_SENDCTRL_AVAIL_BLIP | \ 4611 QIB_SENDCTRL_DISARM | \ 4612 QIB_SENDCTRL_DISARM_ALL | \ 4613 QIB_SENDCTRL_SEND_ENB) 4614 4615 #define SENDCTRL_PORT_MODS (\ 4616 QIB_SENDCTRL_CLEAR | \ 4617 QIB_SENDCTRL_SEND_ENB | \ 4618 QIB_SENDCTRL_SEND_DIS | \ 4619 QIB_SENDCTRL_FLUSH) 4620 4621 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) 4622 { 4623 struct qib_devdata *dd = ppd->dd; 4624 u64 tmp_dd_sendctrl; 4625 unsigned long flags; 4626 4627 spin_lock_irqsave(&dd->sendctrl_lock, flags); 4628 4629 /* First the dd ones that are "sticky", saved in shadow */ 4630 if (op & QIB_SENDCTRL_CLEAR) 4631 dd->sendctrl = 0; 4632 if (op & QIB_SENDCTRL_AVAIL_DIS) 4633 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4634 else if (op & QIB_SENDCTRL_AVAIL_ENB) { 4635 dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); 4636 if (dd->flags & QIB_USE_SPCL_TRIG) 4637 dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); 4638 } 4639 4640 /* Then the ppd ones that are "sticky", saved in shadow */ 4641 if (op & QIB_SENDCTRL_SEND_DIS) 4642 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); 4643 else if (op & QIB_SENDCTRL_SEND_ENB) 4644 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); 4645 4646 if (op & QIB_SENDCTRL_DISARM_ALL) { 4647 u32 i, last; 4648 4649 tmp_dd_sendctrl = dd->sendctrl; 4650 last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 4651 /* 4652 * Disarm any buffers that are not yet launched, 4653 * disabling updates until done. 4654 */ 4655 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4656 for (i = 0; i < last; i++) { 4657 qib_write_kreg(dd, kr_sendctrl, 4658 tmp_dd_sendctrl | 4659 SYM_MASK(SendCtrl, Disarm) | i); 4660 qib_write_kreg(dd, kr_scratch, 0); 4661 } 4662 } 4663 4664 if (op & QIB_SENDCTRL_FLUSH) { 4665 u64 tmp_ppd_sendctrl = ppd->p_sendctrl; 4666 4667 /* 4668 * Now drain all the fifos. The Abort bit should never be 4669 * needed, so for now, at least, we don't use it. 4670 */ 4671 tmp_ppd_sendctrl |= 4672 SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | 4673 SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | 4674 SYM_MASK(SendCtrl_0, TxeBypassIbc); 4675 qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); 4676 qib_write_kreg(dd, kr_scratch, 0); 4677 } 4678 4679 tmp_dd_sendctrl = dd->sendctrl; 4680 4681 if (op & QIB_SENDCTRL_DISARM) 4682 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | 4683 ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << 4684 SYM_LSB(SendCtrl, DisarmSendBuf)); 4685 if ((op & QIB_SENDCTRL_AVAIL_BLIP) && 4686 (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) 4687 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); 4688 4689 if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { 4690 qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); 4691 qib_write_kreg(dd, kr_scratch, 0); 4692 } 4693 4694 if (op == 0 || (op & SENDCTRL_PORT_MODS)) { 4695 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); 4696 qib_write_kreg(dd, kr_scratch, 0); 4697 } 4698 4699 if (op & QIB_SENDCTRL_AVAIL_BLIP) { 4700 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); 4701 qib_write_kreg(dd, kr_scratch, 0); 4702 } 4703 4704 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 4705 4706 if (op & QIB_SENDCTRL_FLUSH) { 4707 u32 v; 4708 /* 4709 * ensure writes have hit chip, then do a few 4710 * more reads, to allow DMA of pioavail registers 4711 * to occur, so in-memory copy is in sync with 4712 * the chip. Not always safe to sleep. 4713 */ 4714 v = qib_read_kreg32(dd, kr_scratch); 4715 qib_write_kreg(dd, kr_scratch, v); 4716 v = qib_read_kreg32(dd, kr_scratch); 4717 qib_write_kreg(dd, kr_scratch, v); 4718 qib_read_kreg32(dd, kr_scratch); 4719 } 4720 } 4721 4722 #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ 4723 #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ 4724 #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ 4725 4726 /** 4727 * qib_portcntr_7322 - read a per-port chip counter 4728 * @ppd: the qlogic_ib pport 4729 * @creg: the counter to read (not a chip offset) 4730 */ 4731 static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) 4732 { 4733 struct qib_devdata *dd = ppd->dd; 4734 u64 ret = 0ULL; 4735 u16 creg; 4736 /* 0xffff for unimplemented or synthesized counters */ 4737 static const u32 xlator[] = { 4738 [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, 4739 [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, 4740 [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, 4741 [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, 4742 [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, 4743 [QIBPORTCNTR_SENDSTALL] = crp_sendstall, 4744 [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, 4745 [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, 4746 [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, 4747 [QIBPORTCNTR_RCVEBP] = crp_rcvebp, 4748 [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, 4749 [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, 4750 [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ 4751 [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, 4752 [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, 4753 [QIBPORTCNTR_ERRICRC] = crp_erricrc, 4754 [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, 4755 [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, 4756 [QIBPORTCNTR_BADFORMAT] = crp_badformat, 4757 [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, 4758 [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, 4759 [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, 4760 [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, 4761 [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, 4762 [QIBPORTCNTR_ERRLINK] = crp_errlink, 4763 [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, 4764 [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, 4765 [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, 4766 [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, 4767 [QIBPORTCNTR_ERRPKEY] = crp_errpkey, 4768 /* 4769 * the next 3 aren't really counters, but were implemented 4770 * as counters in older chips, so still get accessed as 4771 * though they were counters from this code. 4772 */ 4773 [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, 4774 [QIBPORTCNTR_PSSTART] = krp_psstart, 4775 [QIBPORTCNTR_PSSTAT] = krp_psstat, 4776 /* pseudo-counter, summed for all ports */ 4777 [QIBPORTCNTR_KHDROVFL] = 0xffff, 4778 }; 4779 4780 if (reg >= ARRAY_SIZE(xlator)) { 4781 qib_devinfo(ppd->dd->pcidev, 4782 "Unimplemented portcounter %u\n", reg); 4783 goto done; 4784 } 4785 creg = xlator[reg] & _PORT_CNTR_IDXMASK; 4786 4787 /* handle non-counters and special cases first */ 4788 if (reg == QIBPORTCNTR_KHDROVFL) { 4789 int i; 4790 4791 /* sum over all kernel contexts (skip if mini_init) */ 4792 for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { 4793 struct qib_ctxtdata *rcd = dd->rcd[i]; 4794 4795 if (!rcd || rcd->ppd != ppd) 4796 continue; 4797 ret += read_7322_creg32(dd, cr_base_egrovfl + i); 4798 } 4799 goto done; 4800 } else if (reg == QIBPORTCNTR_RXDROPPKT) { 4801 /* 4802 * Used as part of the synthesis of port_rcv_errors 4803 * in the verbs code for IBTA counters. Not needed for 7322, 4804 * because all the errors are already counted by other cntrs. 4805 */ 4806 goto done; 4807 } else if (reg == QIBPORTCNTR_PSINTERVAL || 4808 reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { 4809 /* were counters in older chips, now per-port kernel regs */ 4810 ret = qib_read_kreg_port(ppd, creg); 4811 goto done; 4812 } 4813 4814 /* 4815 * Only fast increment counters are 64 bits; use 32 bit reads to 4816 * avoid two independent reads when on Opteron. 4817 */ 4818 if (xlator[reg] & _PORT_64BIT_FLAG) 4819 ret = read_7322_creg_port(ppd, creg); 4820 else 4821 ret = read_7322_creg32_port(ppd, creg); 4822 if (creg == crp_ibsymbolerr) { 4823 if (ppd->cpspec->ibdeltainprog) 4824 ret -= ret - ppd->cpspec->ibsymsnap; 4825 ret -= ppd->cpspec->ibsymdelta; 4826 } else if (creg == crp_iblinkerrrecov) { 4827 if (ppd->cpspec->ibdeltainprog) 4828 ret -= ret - ppd->cpspec->iblnkerrsnap; 4829 ret -= ppd->cpspec->iblnkerrdelta; 4830 } else if (creg == crp_errlink) 4831 ret -= ppd->cpspec->ibmalfdelta; 4832 else if (creg == crp_iblinkdown) 4833 ret += ppd->cpspec->iblnkdowndelta; 4834 done: 4835 return ret; 4836 } 4837 4838 /* 4839 * Device counter names (not port-specific), one line per stat, 4840 * single string. Used by utilities like ipathstats to print the stats 4841 * in a way which works for different versions of drivers, without changing 4842 * the utility. Names need to be 12 chars or less (w/o newline), for proper 4843 * display by utility. 4844 * Non-error counters are first. 4845 * Start of "error" conters is indicated by a leading "E " on the first 4846 * "error" counter, and doesn't count in label length. 4847 * The EgrOvfl list needs to be last so we truncate them at the configured 4848 * context count for the device. 4849 * cntr7322indices contains the corresponding register indices. 4850 */ 4851 static const char cntr7322names[] = 4852 "Interrupts\n" 4853 "HostBusStall\n" 4854 "E RxTIDFull\n" 4855 "RxTIDInvalid\n" 4856 "RxTIDFloDrop\n" /* 7322 only */ 4857 "Ctxt0EgrOvfl\n" 4858 "Ctxt1EgrOvfl\n" 4859 "Ctxt2EgrOvfl\n" 4860 "Ctxt3EgrOvfl\n" 4861 "Ctxt4EgrOvfl\n" 4862 "Ctxt5EgrOvfl\n" 4863 "Ctxt6EgrOvfl\n" 4864 "Ctxt7EgrOvfl\n" 4865 "Ctxt8EgrOvfl\n" 4866 "Ctxt9EgrOvfl\n" 4867 "Ctx10EgrOvfl\n" 4868 "Ctx11EgrOvfl\n" 4869 "Ctx12EgrOvfl\n" 4870 "Ctx13EgrOvfl\n" 4871 "Ctx14EgrOvfl\n" 4872 "Ctx15EgrOvfl\n" 4873 "Ctx16EgrOvfl\n" 4874 "Ctx17EgrOvfl\n" 4875 ; 4876 4877 static const u32 cntr7322indices[] = { 4878 cr_lbint | _PORT_64BIT_FLAG, 4879 cr_lbstall | _PORT_64BIT_FLAG, 4880 cr_tidfull, 4881 cr_tidinvalid, 4882 cr_rxtidflowdrop, 4883 cr_base_egrovfl + 0, 4884 cr_base_egrovfl + 1, 4885 cr_base_egrovfl + 2, 4886 cr_base_egrovfl + 3, 4887 cr_base_egrovfl + 4, 4888 cr_base_egrovfl + 5, 4889 cr_base_egrovfl + 6, 4890 cr_base_egrovfl + 7, 4891 cr_base_egrovfl + 8, 4892 cr_base_egrovfl + 9, 4893 cr_base_egrovfl + 10, 4894 cr_base_egrovfl + 11, 4895 cr_base_egrovfl + 12, 4896 cr_base_egrovfl + 13, 4897 cr_base_egrovfl + 14, 4898 cr_base_egrovfl + 15, 4899 cr_base_egrovfl + 16, 4900 cr_base_egrovfl + 17, 4901 }; 4902 4903 /* 4904 * same as cntr7322names and cntr7322indices, but for port-specific counters. 4905 * portcntr7322indices is somewhat complicated by some registers needing 4906 * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG 4907 */ 4908 static const char portcntr7322names[] = 4909 "TxPkt\n" 4910 "TxFlowPkt\n" 4911 "TxWords\n" 4912 "RxPkt\n" 4913 "RxFlowPkt\n" 4914 "RxWords\n" 4915 "TxFlowStall\n" 4916 "TxDmaDesc\n" /* 7220 and 7322-only */ 4917 "E RxDlidFltr\n" /* 7220 and 7322-only */ 4918 "IBStatusChng\n" 4919 "IBLinkDown\n" 4920 "IBLnkRecov\n" 4921 "IBRxLinkErr\n" 4922 "IBSymbolErr\n" 4923 "RxLLIErr\n" 4924 "RxBadFormat\n" 4925 "RxBadLen\n" 4926 "RxBufOvrfl\n" 4927 "RxEBP\n" 4928 "RxFlowCtlErr\n" 4929 "RxICRCerr\n" 4930 "RxLPCRCerr\n" 4931 "RxVCRCerr\n" 4932 "RxInvalLen\n" 4933 "RxInvalPKey\n" 4934 "RxPktDropped\n" 4935 "TxBadLength\n" 4936 "TxDropped\n" 4937 "TxInvalLen\n" 4938 "TxUnderrun\n" 4939 "TxUnsupVL\n" 4940 "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ 4941 "RxVL15Drop\n" 4942 "RxVlErr\n" 4943 "XcessBufOvfl\n" 4944 "RxQPBadCtxt\n" /* 7322-only from here down */ 4945 "TXBadHeader\n" 4946 ; 4947 4948 static const u32 portcntr7322indices[] = { 4949 QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, 4950 crp_pktsendflow, 4951 QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, 4952 QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, 4953 crp_pktrcvflowctrl, 4954 QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, 4955 QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, 4956 crp_txsdmadesc | _PORT_64BIT_FLAG, 4957 crp_rxdlidfltr, 4958 crp_ibstatuschange, 4959 QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, 4960 QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, 4961 QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, 4962 QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, 4963 QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, 4964 QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, 4965 QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, 4966 QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, 4967 QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, 4968 crp_rcvflowctrlviol, 4969 QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, 4970 QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, 4971 QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, 4972 QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, 4973 QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, 4974 QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, 4975 crp_txminmaxlenerr, 4976 crp_txdroppedpkt, 4977 crp_txlenerr, 4978 crp_txunderrun, 4979 crp_txunsupvl, 4980 QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, 4981 QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, 4982 QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, 4983 QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, 4984 crp_rxqpinvalidctxt, 4985 crp_txhdrerr, 4986 }; 4987 4988 /* do all the setup to make the counter reads efficient later */ 4989 static void init_7322_cntrnames(struct qib_devdata *dd) 4990 { 4991 int i, j = 0; 4992 char *s; 4993 4994 for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; 4995 i++) { 4996 /* we always have at least one counter before the egrovfl */ 4997 if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) 4998 j = 1; 4999 s = strchr(s + 1, '\n'); 5000 if (s && j) 5001 j++; 5002 } 5003 dd->cspec->ncntrs = i; 5004 if (!s) 5005 /* full list; size is without terminating null */ 5006 dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; 5007 else 5008 dd->cspec->cntrnamelen = 1 + s - cntr7322names; 5009 dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64), 5010 GFP_KERNEL); 5011 5012 for (i = 0, s = (char *)portcntr7322names; s; i++) 5013 s = strchr(s + 1, '\n'); 5014 dd->cspec->nportcntrs = i - 1; 5015 dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; 5016 for (i = 0; i < dd->num_pports; ++i) { 5017 dd->pport[i].cpspec->portcntrs = 5018 kmalloc_array(dd->cspec->nportcntrs, sizeof(u64), 5019 GFP_KERNEL); 5020 } 5021 } 5022 5023 static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, 5024 u64 **cntrp) 5025 { 5026 u32 ret; 5027 5028 if (namep) { 5029 ret = dd->cspec->cntrnamelen; 5030 if (pos >= ret) 5031 ret = 0; /* final read after getting everything */ 5032 else 5033 *namep = (char *) cntr7322names; 5034 } else { 5035 u64 *cntr = dd->cspec->cntrs; 5036 int i; 5037 5038 ret = dd->cspec->ncntrs * sizeof(u64); 5039 if (!cntr || pos >= ret) { 5040 /* everything read, or couldn't get memory */ 5041 ret = 0; 5042 goto done; 5043 } 5044 *cntrp = cntr; 5045 for (i = 0; i < dd->cspec->ncntrs; i++) 5046 if (cntr7322indices[i] & _PORT_64BIT_FLAG) 5047 *cntr++ = read_7322_creg(dd, 5048 cntr7322indices[i] & 5049 _PORT_CNTR_IDXMASK); 5050 else 5051 *cntr++ = read_7322_creg32(dd, 5052 cntr7322indices[i]); 5053 } 5054 done: 5055 return ret; 5056 } 5057 5058 static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, 5059 char **namep, u64 **cntrp) 5060 { 5061 u32 ret; 5062 5063 if (namep) { 5064 ret = dd->cspec->portcntrnamelen; 5065 if (pos >= ret) 5066 ret = 0; /* final read after getting everything */ 5067 else 5068 *namep = (char *)portcntr7322names; 5069 } else { 5070 struct qib_pportdata *ppd = &dd->pport[port]; 5071 u64 *cntr = ppd->cpspec->portcntrs; 5072 int i; 5073 5074 ret = dd->cspec->nportcntrs * sizeof(u64); 5075 if (!cntr || pos >= ret) { 5076 /* everything read, or couldn't get memory */ 5077 ret = 0; 5078 goto done; 5079 } 5080 *cntrp = cntr; 5081 for (i = 0; i < dd->cspec->nportcntrs; i++) { 5082 if (portcntr7322indices[i] & _PORT_VIRT_FLAG) 5083 *cntr++ = qib_portcntr_7322(ppd, 5084 portcntr7322indices[i] & 5085 _PORT_CNTR_IDXMASK); 5086 else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) 5087 *cntr++ = read_7322_creg_port(ppd, 5088 portcntr7322indices[i] & 5089 _PORT_CNTR_IDXMASK); 5090 else 5091 *cntr++ = read_7322_creg32_port(ppd, 5092 portcntr7322indices[i]); 5093 } 5094 } 5095 done: 5096 return ret; 5097 } 5098 5099 /** 5100 * qib_get_7322_faststats - get word counters from chip before they overflow 5101 * @opaque - contains a pointer to the qlogic_ib device qib_devdata 5102 * 5103 * VESTIGIAL IBA7322 has no "small fast counters", so the only 5104 * real purpose of this function is to maintain the notion of 5105 * "active time", which in turn is only logged into the eeprom, 5106 * which we don;t have, yet, for 7322-based boards. 5107 * 5108 * called from add_timer 5109 */ 5110 static void qib_get_7322_faststats(struct timer_list *t) 5111 { 5112 struct qib_devdata *dd = from_timer(dd, t, stats_timer); 5113 struct qib_pportdata *ppd; 5114 unsigned long flags; 5115 u64 traffic_wds; 5116 int pidx; 5117 5118 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5119 ppd = dd->pport + pidx; 5120 5121 /* 5122 * If port isn't enabled or not operational ports, or 5123 * diags is running (can cause memory diags to fail) 5124 * skip this port this time. 5125 */ 5126 if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) 5127 || dd->diag_client) 5128 continue; 5129 5130 /* 5131 * Maintain an activity timer, based on traffic 5132 * exceeding a threshold, so we need to check the word-counts 5133 * even if they are 64-bit. 5134 */ 5135 traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + 5136 qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); 5137 spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); 5138 traffic_wds -= ppd->dd->traffic_wds; 5139 ppd->dd->traffic_wds += traffic_wds; 5140 spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); 5141 if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & 5142 QIB_IB_QDR) && 5143 (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 5144 QIBL_LINKACTIVE)) && 5145 ppd->cpspec->qdr_dfe_time && 5146 time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) { 5147 ppd->cpspec->qdr_dfe_on = 0; 5148 5149 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 5150 ppd->dd->cspec->r1 ? 5151 QDR_STATIC_ADAPT_INIT_R1 : 5152 QDR_STATIC_ADAPT_INIT); 5153 force_h1(ppd); 5154 } 5155 } 5156 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); 5157 } 5158 5159 /* 5160 * If we were using MSIx, try to fallback to INTx. 5161 */ 5162 static int qib_7322_intr_fallback(struct qib_devdata *dd) 5163 { 5164 if (!dd->cspec->num_msix_entries) 5165 return 0; /* already using INTx */ 5166 5167 qib_devinfo(dd->pcidev, 5168 "MSIx interrupt not detected, trying INTx interrupts\n"); 5169 qib_7322_free_irq(dd); 5170 if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_LEGACY) < 0) 5171 qib_dev_err(dd, "Failed to enable INTx\n"); 5172 qib_setup_7322_interrupt(dd, 0); 5173 return 1; 5174 } 5175 5176 /* 5177 * Reset the XGXS (between serdes and IBC). Slightly less intrusive 5178 * than resetting the IBC or external link state, and useful in some 5179 * cases to cause some retraining. To do this right, we reset IBC 5180 * as well, then return to previous state (which may be still in reset) 5181 * NOTE: some callers of this "know" this writes the current value 5182 * of cpspec->ibcctrl_a as part of it's operation, so if that changes, 5183 * check all callers. 5184 */ 5185 static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) 5186 { 5187 u64 val; 5188 struct qib_devdata *dd = ppd->dd; 5189 const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | 5190 SYM_MASK(IBPCSConfig_0, xcv_treset) | 5191 SYM_MASK(IBPCSConfig_0, tx_rx_reset); 5192 5193 val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); 5194 qib_write_kreg(dd, kr_hwerrmask, 5195 dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop)); 5196 qib_write_kreg_port(ppd, krp_ibcctrl_a, 5197 ppd->cpspec->ibcctrl_a & 5198 ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); 5199 5200 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); 5201 qib_read_kreg32(dd, kr_scratch); 5202 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); 5203 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); 5204 qib_write_kreg(dd, kr_scratch, 0ULL); 5205 qib_write_kreg(dd, kr_hwerrclear, 5206 SYM_MASK(HwErrClear, statusValidNoEopClear)); 5207 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); 5208 } 5209 5210 /* 5211 * This code for non-IBTA-compliant IB speed negotiation is only known to 5212 * work for the SDR to DDR transition, and only between an HCA and a switch 5213 * with recent firmware. It is based on observed heuristics, rather than 5214 * actual knowledge of the non-compliant speed negotiation. 5215 * It has a number of hard-coded fields, since the hope is to rewrite this 5216 * when a spec is available on how the negoation is intended to work. 5217 */ 5218 static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, 5219 u32 dcnt, u32 *data) 5220 { 5221 int i; 5222 u64 pbc; 5223 u32 __iomem *piobuf; 5224 u32 pnum, control, len; 5225 struct qib_devdata *dd = ppd->dd; 5226 5227 i = 0; 5228 len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ 5229 control = qib_7322_setpbc_control(ppd, len, 0, 15); 5230 pbc = ((u64) control << 32) | len; 5231 while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { 5232 if (i++ > 15) 5233 return; 5234 udelay(2); 5235 } 5236 /* disable header check on this packet, since it can't be valid */ 5237 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); 5238 writeq(pbc, piobuf); 5239 qib_flush_wc(); 5240 qib_pio_copy(piobuf + 2, hdr, 7); 5241 qib_pio_copy(piobuf + 9, data, dcnt); 5242 if (dd->flags & QIB_USE_SPCL_TRIG) { 5243 u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; 5244 5245 qib_flush_wc(); 5246 __raw_writel(0xaebecede, piobuf + spcl_off); 5247 } 5248 qib_flush_wc(); 5249 qib_sendbuf_done(dd, pnum); 5250 /* and re-enable hdr check */ 5251 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); 5252 } 5253 5254 /* 5255 * _start packet gets sent twice at start, _done gets sent twice at end 5256 */ 5257 static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) 5258 { 5259 struct qib_devdata *dd = ppd->dd; 5260 static u32 swapped; 5261 u32 dw, i, hcnt, dcnt, *data; 5262 static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; 5263 static u32 madpayload_start[0x40] = { 5264 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5265 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5266 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ 5267 }; 5268 static u32 madpayload_done[0x40] = { 5269 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 5270 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 5271 0x40000001, 0x1388, 0x15e, /* rest 0's */ 5272 }; 5273 5274 dcnt = ARRAY_SIZE(madpayload_start); 5275 hcnt = ARRAY_SIZE(hdr); 5276 if (!swapped) { 5277 /* for maintainability, do it at runtime */ 5278 for (i = 0; i < hcnt; i++) { 5279 dw = (__force u32) cpu_to_be32(hdr[i]); 5280 hdr[i] = dw; 5281 } 5282 for (i = 0; i < dcnt; i++) { 5283 dw = (__force u32) cpu_to_be32(madpayload_start[i]); 5284 madpayload_start[i] = dw; 5285 dw = (__force u32) cpu_to_be32(madpayload_done[i]); 5286 madpayload_done[i] = dw; 5287 } 5288 swapped = 1; 5289 } 5290 5291 data = which ? madpayload_done : madpayload_start; 5292 5293 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5294 qib_read_kreg64(dd, kr_scratch); 5295 udelay(2); 5296 autoneg_7322_sendpkt(ppd, hdr, dcnt, data); 5297 qib_read_kreg64(dd, kr_scratch); 5298 udelay(2); 5299 } 5300 5301 /* 5302 * Do the absolute minimum to cause an IB speed change, and make it 5303 * ready, but don't actually trigger the change. The caller will 5304 * do that when ready (if link is in Polling training state, it will 5305 * happen immediately, otherwise when link next goes down) 5306 * 5307 * This routine should only be used as part of the DDR autonegotation 5308 * code for devices that are not compliant with IB 1.2 (or code that 5309 * fixes things up for same). 5310 * 5311 * When link has gone down, and autoneg enabled, or autoneg has 5312 * failed and we give up until next time we set both speeds, and 5313 * then we want IBTA enabled as well as "use max enabled speed. 5314 */ 5315 static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) 5316 { 5317 u64 newctrlb; 5318 5319 newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | 5320 IBA7322_IBC_IBTA_1_2_MASK | 5321 IBA7322_IBC_MAX_SPEED_MASK); 5322 5323 if (speed & (speed - 1)) /* multiple speeds */ 5324 newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | 5325 IBA7322_IBC_IBTA_1_2_MASK | 5326 IBA7322_IBC_MAX_SPEED_MASK; 5327 else 5328 newctrlb |= speed == QIB_IB_QDR ? 5329 IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : 5330 ((speed == QIB_IB_DDR ? 5331 IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); 5332 5333 if (newctrlb == ppd->cpspec->ibcctrl_b) 5334 return; 5335 5336 ppd->cpspec->ibcctrl_b = newctrlb; 5337 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); 5338 qib_write_kreg(ppd->dd, kr_scratch, 0); 5339 } 5340 5341 /* 5342 * This routine is only used when we are not talking to another 5343 * IB 1.2-compliant device that we think can do DDR. 5344 * (This includes all existing switch chips as of Oct 2007.) 5345 * 1.2-compliant devices go directly to DDR prior to reaching INIT 5346 */ 5347 static void try_7322_autoneg(struct qib_pportdata *ppd) 5348 { 5349 unsigned long flags; 5350 5351 spin_lock_irqsave(&ppd->lflags_lock, flags); 5352 ppd->lflags |= QIBL_IB_AUTONEG_INPROG; 5353 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5354 qib_autoneg_7322_send(ppd, 0); 5355 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5356 qib_7322_mini_pcs_reset(ppd); 5357 /* 2 msec is minimum length of a poll cycle */ 5358 queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, 5359 msecs_to_jiffies(2)); 5360 } 5361 5362 /* 5363 * Handle the empirically determined mechanism for auto-negotiation 5364 * of DDR speed with switches. 5365 */ 5366 static void autoneg_7322_work(struct work_struct *work) 5367 { 5368 struct qib_pportdata *ppd; 5369 u32 i; 5370 unsigned long flags; 5371 5372 ppd = container_of(work, struct qib_chippport_specific, 5373 autoneg_work.work)->ppd; 5374 5375 /* 5376 * Busy wait for this first part, it should be at most a 5377 * few hundred usec, since we scheduled ourselves for 2msec. 5378 */ 5379 for (i = 0; i < 25; i++) { 5380 if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) 5381 == IB_7322_LT_STATE_POLLQUIET) { 5382 qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); 5383 break; 5384 } 5385 udelay(100); 5386 } 5387 5388 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) 5389 goto done; /* we got there early or told to stop */ 5390 5391 /* we expect this to timeout */ 5392 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5393 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5394 msecs_to_jiffies(90))) 5395 goto done; 5396 qib_7322_mini_pcs_reset(ppd); 5397 5398 /* we expect this to timeout */ 5399 if (wait_event_timeout(ppd->cpspec->autoneg_wait, 5400 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5401 msecs_to_jiffies(1700))) 5402 goto done; 5403 qib_7322_mini_pcs_reset(ppd); 5404 5405 set_7322_ibspeed_fast(ppd, QIB_IB_SDR); 5406 5407 /* 5408 * Wait up to 250 msec for link to train and get to INIT at DDR; 5409 * this should terminate early. 5410 */ 5411 wait_event_timeout(ppd->cpspec->autoneg_wait, 5412 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), 5413 msecs_to_jiffies(250)); 5414 done: 5415 if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { 5416 spin_lock_irqsave(&ppd->lflags_lock, flags); 5417 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; 5418 if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { 5419 ppd->lflags |= QIBL_IB_AUTONEG_FAILED; 5420 ppd->cpspec->autoneg_tries = 0; 5421 } 5422 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5423 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5424 } 5425 } 5426 5427 /* 5428 * This routine is used to request IPG set in the QLogic switch. 5429 * Only called if r1. 5430 */ 5431 static void try_7322_ipg(struct qib_pportdata *ppd) 5432 { 5433 struct qib_ibport *ibp = &ppd->ibport_data; 5434 struct ib_mad_send_buf *send_buf; 5435 struct ib_mad_agent *agent; 5436 struct ib_smp *smp; 5437 unsigned delay; 5438 int ret; 5439 5440 agent = ibp->rvp.send_agent; 5441 if (!agent) 5442 goto retry; 5443 5444 send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, 5445 IB_MGMT_MAD_DATA, GFP_ATOMIC, 5446 IB_MGMT_BASE_VERSION); 5447 if (IS_ERR(send_buf)) 5448 goto retry; 5449 5450 if (!ibp->smi_ah) { 5451 struct ib_ah *ah; 5452 5453 ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE)); 5454 if (IS_ERR(ah)) 5455 ret = PTR_ERR(ah); 5456 else { 5457 send_buf->ah = ah; 5458 ibp->smi_ah = ibah_to_rvtah(ah); 5459 ret = 0; 5460 } 5461 } else { 5462 send_buf->ah = &ibp->smi_ah->ibah; 5463 ret = 0; 5464 } 5465 5466 smp = send_buf->mad; 5467 smp->base_version = IB_MGMT_BASE_VERSION; 5468 smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; 5469 smp->class_version = 1; 5470 smp->method = IB_MGMT_METHOD_SEND; 5471 smp->hop_cnt = 1; 5472 smp->attr_id = QIB_VENDOR_IPG; 5473 smp->attr_mod = 0; 5474 5475 if (!ret) 5476 ret = ib_post_send_mad(send_buf, NULL); 5477 if (ret) 5478 ib_free_send_mad(send_buf); 5479 retry: 5480 delay = 2 << ppd->cpspec->ipg_tries; 5481 queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, 5482 msecs_to_jiffies(delay)); 5483 } 5484 5485 /* 5486 * Timeout handler for setting IPG. 5487 * Only called if r1. 5488 */ 5489 static void ipg_7322_work(struct work_struct *work) 5490 { 5491 struct qib_pportdata *ppd; 5492 5493 ppd = container_of(work, struct qib_chippport_specific, 5494 ipg_work.work)->ppd; 5495 if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) 5496 && ++ppd->cpspec->ipg_tries <= 10) 5497 try_7322_ipg(ppd); 5498 } 5499 5500 static u32 qib_7322_iblink_state(u64 ibcs) 5501 { 5502 u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); 5503 5504 switch (state) { 5505 case IB_7322_L_STATE_INIT: 5506 state = IB_PORT_INIT; 5507 break; 5508 case IB_7322_L_STATE_ARM: 5509 state = IB_PORT_ARMED; 5510 break; 5511 case IB_7322_L_STATE_ACTIVE: 5512 /* fall through */ 5513 case IB_7322_L_STATE_ACT_DEFER: 5514 state = IB_PORT_ACTIVE; 5515 break; 5516 default: /* fall through */ 5517 case IB_7322_L_STATE_DOWN: 5518 state = IB_PORT_DOWN; 5519 break; 5520 } 5521 return state; 5522 } 5523 5524 /* returns the IBTA port state, rather than the IBC link training state */ 5525 static u8 qib_7322_phys_portstate(u64 ibcs) 5526 { 5527 u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); 5528 return qib_7322_physportstate[state]; 5529 } 5530 5531 static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) 5532 { 5533 int ret = 0, symadj = 0; 5534 unsigned long flags; 5535 int mult; 5536 5537 spin_lock_irqsave(&ppd->lflags_lock, flags); 5538 ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; 5539 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5540 5541 /* Update our picture of width and speed from chip */ 5542 if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { 5543 ppd->link_speed_active = QIB_IB_QDR; 5544 mult = 4; 5545 } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { 5546 ppd->link_speed_active = QIB_IB_DDR; 5547 mult = 2; 5548 } else { 5549 ppd->link_speed_active = QIB_IB_SDR; 5550 mult = 1; 5551 } 5552 if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { 5553 ppd->link_width_active = IB_WIDTH_4X; 5554 mult *= 4; 5555 } else 5556 ppd->link_width_active = IB_WIDTH_1X; 5557 ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; 5558 5559 if (!ibup) { 5560 u64 clr; 5561 5562 /* Link went down. */ 5563 /* do IPG MAD again after linkdown, even if last time failed */ 5564 ppd->cpspec->ipg_tries = 0; 5565 clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & 5566 (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | 5567 SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); 5568 if (clr) 5569 qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); 5570 if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5571 QIBL_IB_AUTONEG_INPROG))) 5572 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5573 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5574 struct qib_qsfp_data *qd = 5575 &ppd->cpspec->qsfp_data; 5576 /* unlock the Tx settings, speed may change */ 5577 qib_write_kreg_port(ppd, krp_tx_deemph_override, 5578 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 5579 reset_tx_deemphasis_override)); 5580 qib_cancel_sends(ppd); 5581 /* on link down, ensure sane pcs state */ 5582 qib_7322_mini_pcs_reset(ppd); 5583 /* schedule the qsfp refresh which should turn the link 5584 off */ 5585 if (ppd->dd->flags & QIB_HAS_QSFP) { 5586 qd->t_insert = jiffies; 5587 queue_work(ib_wq, &qd->work); 5588 } 5589 spin_lock_irqsave(&ppd->sdma_lock, flags); 5590 if (__qib_sdma_running(ppd)) 5591 __qib_sdma_process_event(ppd, 5592 qib_sdma_event_e70_go_idle); 5593 spin_unlock_irqrestore(&ppd->sdma_lock, flags); 5594 } 5595 clr = read_7322_creg32_port(ppd, crp_iblinkdown); 5596 if (clr == ppd->cpspec->iblnkdownsnap) 5597 ppd->cpspec->iblnkdowndelta++; 5598 } else { 5599 if (qib_compat_ddr_negotiate && 5600 !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | 5601 QIBL_IB_AUTONEG_INPROG)) && 5602 ppd->link_speed_active == QIB_IB_SDR && 5603 (ppd->link_speed_enabled & QIB_IB_DDR) 5604 && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { 5605 /* we are SDR, and auto-negotiation enabled */ 5606 ++ppd->cpspec->autoneg_tries; 5607 if (!ppd->cpspec->ibdeltainprog) { 5608 ppd->cpspec->ibdeltainprog = 1; 5609 ppd->cpspec->ibsymdelta += 5610 read_7322_creg32_port(ppd, 5611 crp_ibsymbolerr) - 5612 ppd->cpspec->ibsymsnap; 5613 ppd->cpspec->iblnkerrdelta += 5614 read_7322_creg32_port(ppd, 5615 crp_iblinkerrrecov) - 5616 ppd->cpspec->iblnkerrsnap; 5617 } 5618 try_7322_autoneg(ppd); 5619 ret = 1; /* no other IB status change processing */ 5620 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5621 ppd->link_speed_active == QIB_IB_SDR) { 5622 qib_autoneg_7322_send(ppd, 1); 5623 set_7322_ibspeed_fast(ppd, QIB_IB_DDR); 5624 qib_7322_mini_pcs_reset(ppd); 5625 udelay(2); 5626 ret = 1; /* no other IB status change processing */ 5627 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && 5628 (ppd->link_speed_active & QIB_IB_DDR)) { 5629 spin_lock_irqsave(&ppd->lflags_lock, flags); 5630 ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | 5631 QIBL_IB_AUTONEG_FAILED); 5632 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5633 ppd->cpspec->autoneg_tries = 0; 5634 /* re-enable SDR, for next link down */ 5635 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); 5636 wake_up(&ppd->cpspec->autoneg_wait); 5637 symadj = 1; 5638 } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { 5639 /* 5640 * Clear autoneg failure flag, and do setup 5641 * so we'll try next time link goes down and 5642 * back to INIT (possibly connected to a 5643 * different device). 5644 */ 5645 spin_lock_irqsave(&ppd->lflags_lock, flags); 5646 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; 5647 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5648 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; 5649 symadj = 1; 5650 } 5651 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5652 symadj = 1; 5653 if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) 5654 try_7322_ipg(ppd); 5655 if (!ppd->cpspec->recovery_init) 5656 setup_7322_link_recovery(ppd, 0); 5657 ppd->cpspec->qdr_dfe_time = jiffies + 5658 msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); 5659 } 5660 ppd->cpspec->ibmalfusesnap = 0; 5661 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, 5662 crp_errlink); 5663 } 5664 if (symadj) { 5665 ppd->cpspec->iblnkdownsnap = 5666 read_7322_creg32_port(ppd, crp_iblinkdown); 5667 if (ppd->cpspec->ibdeltainprog) { 5668 ppd->cpspec->ibdeltainprog = 0; 5669 ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, 5670 crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; 5671 ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, 5672 crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; 5673 } 5674 } else if (!ibup && qib_compat_ddr_negotiate && 5675 !ppd->cpspec->ibdeltainprog && 5676 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { 5677 ppd->cpspec->ibdeltainprog = 1; 5678 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, 5679 crp_ibsymbolerr); 5680 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, 5681 crp_iblinkerrrecov); 5682 } 5683 5684 if (!ret) 5685 qib_setup_7322_setextled(ppd, ibup); 5686 return ret; 5687 } 5688 5689 /* 5690 * Does read/modify/write to appropriate registers to 5691 * set output and direction bits selected by mask. 5692 * these are in their canonical postions (e.g. lsb of 5693 * dir will end up in D48 of extctrl on existing chips). 5694 * returns contents of GP Inputs. 5695 */ 5696 static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) 5697 { 5698 u64 read_val, new_out; 5699 unsigned long flags; 5700 5701 if (mask) { 5702 /* some bits being written, lock access to GPIO */ 5703 dir &= mask; 5704 out &= mask; 5705 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 5706 dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); 5707 dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); 5708 new_out = (dd->cspec->gpio_out & ~mask) | out; 5709 5710 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 5711 qib_write_kreg(dd, kr_gpio_out, new_out); 5712 dd->cspec->gpio_out = new_out; 5713 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 5714 } 5715 /* 5716 * It is unlikely that a read at this time would get valid 5717 * data on a pin whose direction line was set in the same 5718 * call to this function. We include the read here because 5719 * that allows us to potentially combine a change on one pin with 5720 * a read on another, and because the old code did something like 5721 * this. 5722 */ 5723 read_val = qib_read_kreg64(dd, kr_extstatus); 5724 return SYM_FIELD(read_val, EXTStatus, GPIOIn); 5725 } 5726 5727 /* Enable writes to config EEPROM, if possible. Returns previous state */ 5728 static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) 5729 { 5730 int prev_wen; 5731 u32 mask; 5732 5733 mask = 1 << QIB_EEPROM_WEN_NUM; 5734 prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; 5735 gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); 5736 5737 return prev_wen & 1; 5738 } 5739 5740 /* 5741 * Read fundamental info we need to use the chip. These are 5742 * the registers that describe chip capabilities, and are 5743 * saved in shadow registers. 5744 */ 5745 static void get_7322_chip_params(struct qib_devdata *dd) 5746 { 5747 u64 val; 5748 u32 piobufs; 5749 int mtu; 5750 5751 dd->palign = qib_read_kreg32(dd, kr_pagealign); 5752 5753 dd->uregbase = qib_read_kreg32(dd, kr_userregbase); 5754 5755 dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); 5756 dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); 5757 dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); 5758 dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); 5759 dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; 5760 5761 val = qib_read_kreg64(dd, kr_sendpiobufcnt); 5762 dd->piobcnt2k = val & ~0U; 5763 dd->piobcnt4k = val >> 32; 5764 val = qib_read_kreg64(dd, kr_sendpiosize); 5765 dd->piosize2k = val & ~0U; 5766 dd->piosize4k = val >> 32; 5767 5768 mtu = ib_mtu_enum_to_int(qib_ibmtu); 5769 if (mtu == -1) 5770 mtu = QIB_DEFAULT_MTU; 5771 dd->pport[0].ibmtu = (u32)mtu; 5772 dd->pport[1].ibmtu = (u32)mtu; 5773 5774 /* these may be adjusted in init_chip_wc_pat() */ 5775 dd->pio2kbase = (u32 __iomem *) 5776 ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); 5777 dd->pio4kbase = (u32 __iomem *) 5778 ((char __iomem *) dd->kregbase + 5779 (dd->piobufbase >> 32)); 5780 /* 5781 * 4K buffers take 2 pages; we use roundup just to be 5782 * paranoid; we calculate it once here, rather than on 5783 * ever buf allocate 5784 */ 5785 dd->align4k = ALIGN(dd->piosize4k, dd->palign); 5786 5787 piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; 5788 5789 dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / 5790 (sizeof(u64) * BITS_PER_BYTE / 2); 5791 } 5792 5793 /* 5794 * The chip base addresses in cspec and cpspec have to be set 5795 * after possible init_chip_wc_pat(), rather than in 5796 * get_7322_chip_params(), so split out as separate function 5797 */ 5798 static void qib_7322_set_baseaddrs(struct qib_devdata *dd) 5799 { 5800 u32 cregbase; 5801 5802 cregbase = qib_read_kreg32(dd, kr_counterregbase); 5803 5804 dd->cspec->cregbase = (u64 __iomem *)(cregbase + 5805 (char __iomem *)dd->kregbase); 5806 5807 dd->egrtidbase = (u64 __iomem *) 5808 ((char __iomem *) dd->kregbase + dd->rcvegrbase); 5809 5810 /* port registers are defined as relative to base of chip */ 5811 dd->pport[0].cpspec->kpregbase = 5812 (u64 __iomem *)((char __iomem *)dd->kregbase); 5813 dd->pport[1].cpspec->kpregbase = 5814 (u64 __iomem *)(dd->palign + 5815 (char __iomem *)dd->kregbase); 5816 dd->pport[0].cpspec->cpregbase = 5817 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], 5818 kr_counterregbase) + (char __iomem *)dd->kregbase); 5819 dd->pport[1].cpspec->cpregbase = 5820 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], 5821 kr_counterregbase) + (char __iomem *)dd->kregbase); 5822 } 5823 5824 /* 5825 * This is a fairly special-purpose observer, so we only support 5826 * the port-specific parts of SendCtrl 5827 */ 5828 5829 #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ 5830 SYM_MASK(SendCtrl_0, SDmaEnable) | \ 5831 SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ 5832 SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ 5833 SYM_MASK(SendCtrl_0, SDmaHalt) | \ 5834 SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ 5835 SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) 5836 5837 static int sendctrl_hook(struct qib_devdata *dd, 5838 const struct diag_observer *op, u32 offs, 5839 u64 *data, u64 mask, int only_32) 5840 { 5841 unsigned long flags; 5842 unsigned idx; 5843 unsigned pidx; 5844 struct qib_pportdata *ppd = NULL; 5845 u64 local_data, all_bits; 5846 5847 /* 5848 * The fixed correspondence between Physical ports and pports is 5849 * severed. We need to hunt for the ppd that corresponds 5850 * to the offset we got. And we have to do that without admitting 5851 * we know the stride, apparently. 5852 */ 5853 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 5854 u64 __iomem *psptr; 5855 u32 psoffs; 5856 5857 ppd = dd->pport + pidx; 5858 if (!ppd->cpspec->kpregbase) 5859 continue; 5860 5861 psptr = ppd->cpspec->kpregbase + krp_sendctrl; 5862 psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); 5863 if (psoffs == offs) 5864 break; 5865 } 5866 5867 /* If pport is not being managed by driver, just avoid shadows. */ 5868 if (pidx >= dd->num_pports) 5869 ppd = NULL; 5870 5871 /* In any case, "idx" is flat index in kreg space */ 5872 idx = offs / sizeof(u64); 5873 5874 all_bits = ~0ULL; 5875 if (only_32) 5876 all_bits >>= 32; 5877 5878 spin_lock_irqsave(&dd->sendctrl_lock, flags); 5879 if (!ppd || (mask & all_bits) != all_bits) { 5880 /* 5881 * At least some mask bits are zero, so we need 5882 * to read. The judgement call is whether from 5883 * reg or shadow. First-cut: read reg, and complain 5884 * if any bits which should be shadowed are different 5885 * from their shadowed value. 5886 */ 5887 if (only_32) 5888 local_data = (u64)qib_read_kreg32(dd, idx); 5889 else 5890 local_data = qib_read_kreg64(dd, idx); 5891 *data = (local_data & ~mask) | (*data & mask); 5892 } 5893 if (mask) { 5894 /* 5895 * At least some mask bits are one, so we need 5896 * to write, but only shadow some bits. 5897 */ 5898 u64 sval, tval; /* Shadowed, transient */ 5899 5900 /* 5901 * New shadow val is bits we don't want to touch, 5902 * ORed with bits we do, that are intended for shadow. 5903 */ 5904 if (ppd) { 5905 sval = ppd->p_sendctrl & ~mask; 5906 sval |= *data & SENDCTRL_SHADOWED & mask; 5907 ppd->p_sendctrl = sval; 5908 } else 5909 sval = *data & SENDCTRL_SHADOWED & mask; 5910 tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); 5911 qib_write_kreg(dd, idx, tval); 5912 qib_write_kreg(dd, kr_scratch, 0Ull); 5913 } 5914 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 5915 return only_32 ? 4 : 8; 5916 } 5917 5918 static const struct diag_observer sendctrl_0_observer = { 5919 sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), 5920 KREG_IDX(SendCtrl_0) * sizeof(u64) 5921 }; 5922 5923 static const struct diag_observer sendctrl_1_observer = { 5924 sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), 5925 KREG_IDX(SendCtrl_1) * sizeof(u64) 5926 }; 5927 5928 static ushort sdma_fetch_prio = 8; 5929 module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); 5930 MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); 5931 5932 /* Besides logging QSFP events, we set appropriate TxDDS values */ 5933 static void init_txdds_table(struct qib_pportdata *ppd, int override); 5934 5935 static void qsfp_7322_event(struct work_struct *work) 5936 { 5937 struct qib_qsfp_data *qd; 5938 struct qib_pportdata *ppd; 5939 unsigned long pwrup; 5940 unsigned long flags; 5941 int ret; 5942 u32 le2; 5943 5944 qd = container_of(work, struct qib_qsfp_data, work); 5945 ppd = qd->ppd; 5946 pwrup = qd->t_insert + 5947 msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); 5948 5949 /* Delay for 20 msecs to allow ModPrs resistor to setup */ 5950 mdelay(QSFP_MODPRS_LAG_MSEC); 5951 5952 if (!qib_qsfp_mod_present(ppd)) { 5953 ppd->cpspec->qsfp_data.modpresent = 0; 5954 /* Set the physical link to disabled */ 5955 qib_set_ib_7322_lstate(ppd, 0, 5956 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 5957 spin_lock_irqsave(&ppd->lflags_lock, flags); 5958 ppd->lflags &= ~QIBL_LINKV; 5959 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 5960 } else { 5961 /* 5962 * Some QSFP's not only do not respond until the full power-up 5963 * time, but may behave badly if we try. So hold off responding 5964 * to insertion. 5965 */ 5966 while (1) { 5967 if (time_is_before_jiffies(pwrup)) 5968 break; 5969 msleep(20); 5970 } 5971 5972 ret = qib_refresh_qsfp_cache(ppd, &qd->cache); 5973 5974 /* 5975 * Need to change LE2 back to defaults if we couldn't 5976 * read the cable type (to handle cable swaps), so do this 5977 * even on failure to read cable information. We don't 5978 * get here for QME, so IS_QME check not needed here. 5979 */ 5980 if (!ret && !ppd->dd->cspec->r1) { 5981 if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) 5982 le2 = LE2_QME; 5983 else if (qd->cache.atten[1] >= qib_long_atten && 5984 QSFP_IS_CU(qd->cache.tech)) 5985 le2 = LE2_5m; 5986 else 5987 le2 = LE2_DEFAULT; 5988 } else 5989 le2 = LE2_DEFAULT; 5990 ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); 5991 /* 5992 * We always change parameteters, since we can choose 5993 * values for cables without eeproms, and the cable may have 5994 * changed from a cable with full or partial eeprom content 5995 * to one with partial or no content. 5996 */ 5997 init_txdds_table(ppd, 0); 5998 /* The physical link is being re-enabled only when the 5999 * previous state was DISABLED and the VALID bit is not 6000 * set. This should only happen when the cable has been 6001 * physically pulled. */ 6002 if (!ppd->cpspec->qsfp_data.modpresent && 6003 (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { 6004 ppd->cpspec->qsfp_data.modpresent = 1; 6005 qib_set_ib_7322_lstate(ppd, 0, 6006 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6007 spin_lock_irqsave(&ppd->lflags_lock, flags); 6008 ppd->lflags |= QIBL_LINKV; 6009 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 6010 } 6011 } 6012 } 6013 6014 /* 6015 * There is little we can do but complain to the user if QSFP 6016 * initialization fails. 6017 */ 6018 static void qib_init_7322_qsfp(struct qib_pportdata *ppd) 6019 { 6020 unsigned long flags; 6021 struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; 6022 struct qib_devdata *dd = ppd->dd; 6023 u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; 6024 6025 mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); 6026 qd->ppd = ppd; 6027 qib_qsfp_init(qd, qsfp_7322_event); 6028 spin_lock_irqsave(&dd->cspec->gpio_lock, flags); 6029 dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); 6030 dd->cspec->gpio_mask |= mod_prs_bit; 6031 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); 6032 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); 6033 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); 6034 } 6035 6036 /* 6037 * called at device initialization time, and also if the txselect 6038 * module parameter is changed. This is used for cables that don't 6039 * have valid QSFP EEPROMs (not present, or attenuation is zero). 6040 * We initialize to the default, then if there is a specific 6041 * unit,port match, we use that (and set it immediately, for the 6042 * current speed, if the link is at INIT or better). 6043 * String format is "default# unit#,port#=# ... u,p=#", separators must 6044 * be a SPACE character. A newline terminates. The u,p=# tuples may 6045 * optionally have "u,p=#,#", where the final # is the H1 value 6046 * The last specific match is used (actually, all are used, but last 6047 * one is the one that winds up set); if none at all, fall back on default. 6048 */ 6049 static void set_no_qsfp_atten(struct qib_devdata *dd, int change) 6050 { 6051 char *nxt, *str; 6052 u32 pidx, unit, port, deflt, h1; 6053 unsigned long val; 6054 int any = 0, seth1; 6055 int txdds_size; 6056 6057 str = txselect_list; 6058 6059 /* default number is validated in setup_txselect() */ 6060 deflt = simple_strtoul(str, &nxt, 0); 6061 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6062 dd->pport[pidx].cpspec->no_eep = deflt; 6063 6064 txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ; 6065 if (IS_QME(dd) || IS_QMH(dd)) 6066 txdds_size += TXDDS_MFG_SZ; 6067 6068 while (*nxt && nxt[1]) { 6069 str = ++nxt; 6070 unit = simple_strtoul(str, &nxt, 0); 6071 if (nxt == str || !*nxt || *nxt != ',') { 6072 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6073 ; 6074 continue; 6075 } 6076 str = ++nxt; 6077 port = simple_strtoul(str, &nxt, 0); 6078 if (nxt == str || *nxt != '=') { 6079 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6080 ; 6081 continue; 6082 } 6083 str = ++nxt; 6084 val = simple_strtoul(str, &nxt, 0); 6085 if (nxt == str) { 6086 while (*nxt && *nxt++ != ' ') /* skip to next, if any */ 6087 ; 6088 continue; 6089 } 6090 if (val >= txdds_size) 6091 continue; 6092 seth1 = 0; 6093 h1 = 0; /* gcc thinks it might be used uninitted */ 6094 if (*nxt == ',' && nxt[1]) { 6095 str = ++nxt; 6096 h1 = (u32)simple_strtoul(str, &nxt, 0); 6097 if (nxt == str) 6098 while (*nxt && *nxt++ != ' ') /* skip */ 6099 ; 6100 else 6101 seth1 = 1; 6102 } 6103 for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; 6104 ++pidx) { 6105 struct qib_pportdata *ppd = &dd->pport[pidx]; 6106 6107 if (ppd->port != port || !ppd->link_speed_supported) 6108 continue; 6109 ppd->cpspec->no_eep = val; 6110 if (seth1) 6111 ppd->cpspec->h1_val = h1; 6112 /* now change the IBC and serdes, overriding generic */ 6113 init_txdds_table(ppd, 1); 6114 /* Re-enable the physical state machine on mezz boards 6115 * now that the correct settings have been set. 6116 * QSFP boards are handles by the QSFP event handler */ 6117 if (IS_QMH(dd) || IS_QME(dd)) 6118 qib_set_ib_7322_lstate(ppd, 0, 6119 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); 6120 any++; 6121 } 6122 if (*nxt == '\n') 6123 break; /* done */ 6124 } 6125 if (change && !any) { 6126 /* no specific setting, use the default. 6127 * Change the IBC and serdes, but since it's 6128 * general, don't override specific settings. 6129 */ 6130 for (pidx = 0; pidx < dd->num_pports; ++pidx) 6131 if (dd->pport[pidx].link_speed_supported) 6132 init_txdds_table(&dd->pport[pidx], 0); 6133 } 6134 } 6135 6136 /* handle the txselect parameter changing */ 6137 static int setup_txselect(const char *str, const struct kernel_param *kp) 6138 { 6139 struct qib_devdata *dd; 6140 unsigned long index, val; 6141 char *n; 6142 6143 if (strlen(str) >= ARRAY_SIZE(txselect_list)) { 6144 pr_info("txselect_values string too long\n"); 6145 return -ENOSPC; 6146 } 6147 val = simple_strtoul(str, &n, 0); 6148 if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 6149 TXDDS_MFG_SZ)) { 6150 pr_info("txselect_values must start with a number < %d\n", 6151 TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ); 6152 return -EINVAL; 6153 } 6154 strncpy(txselect_list, str, ARRAY_SIZE(txselect_list) - 1); 6155 6156 xa_for_each(&qib_dev_table, index, dd) 6157 if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) 6158 set_no_qsfp_atten(dd, 1); 6159 return 0; 6160 } 6161 6162 /* 6163 * Write the final few registers that depend on some of the 6164 * init setup. Done late in init, just before bringing up 6165 * the serdes. 6166 */ 6167 static int qib_late_7322_initreg(struct qib_devdata *dd) 6168 { 6169 int ret = 0, n; 6170 u64 val; 6171 6172 qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); 6173 qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); 6174 qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); 6175 qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); 6176 val = qib_read_kreg64(dd, kr_sendpioavailaddr); 6177 if (val != dd->pioavailregs_phys) { 6178 qib_dev_err(dd, 6179 "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", 6180 (unsigned long) dd->pioavailregs_phys, 6181 (unsigned long long) val); 6182 ret = -EINVAL; 6183 } 6184 6185 n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; 6186 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); 6187 /* driver sends get pkey, lid, etc. checking also, to catch bugs */ 6188 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); 6189 6190 qib_register_observer(dd, &sendctrl_0_observer); 6191 qib_register_observer(dd, &sendctrl_1_observer); 6192 6193 dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; 6194 qib_write_kreg(dd, kr_control, dd->control); 6195 /* 6196 * Set SendDmaFetchPriority and init Tx params, including 6197 * QSFP handler on boards that have QSFP. 6198 * First set our default attenuation entry for cables that 6199 * don't have valid attenuation. 6200 */ 6201 set_no_qsfp_atten(dd, 0); 6202 for (n = 0; n < dd->num_pports; ++n) { 6203 struct qib_pportdata *ppd = dd->pport + n; 6204 6205 qib_write_kreg_port(ppd, krp_senddmaprioritythld, 6206 sdma_fetch_prio & 0xf); 6207 /* Initialize qsfp if present on board. */ 6208 if (dd->flags & QIB_HAS_QSFP) 6209 qib_init_7322_qsfp(ppd); 6210 } 6211 dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; 6212 qib_write_kreg(dd, kr_control, dd->control); 6213 6214 return ret; 6215 } 6216 6217 /* per IB port errors. */ 6218 #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ 6219 MASK_ACROSS(8, 15)) 6220 #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) 6221 #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ 6222 MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ 6223 MASK_ACROSS(0, 11)) 6224 6225 /* 6226 * Write the initialization per-port registers that need to be done at 6227 * driver load and after reset completes (i.e., that aren't done as part 6228 * of other init procedures called from qib_init.c). 6229 * Some of these should be redundant on reset, but play safe. 6230 */ 6231 static void write_7322_init_portregs(struct qib_pportdata *ppd) 6232 { 6233 u64 val; 6234 int i; 6235 6236 if (!ppd->link_speed_supported) { 6237 /* no buffer credits for this port */ 6238 for (i = 1; i < 8; i++) 6239 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); 6240 qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); 6241 qib_write_kreg(ppd->dd, kr_scratch, 0); 6242 return; 6243 } 6244 6245 /* 6246 * Set the number of supported virtual lanes in IBC, 6247 * for flow control packet handling on unsupported VLs 6248 */ 6249 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); 6250 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); 6251 val |= (u64)(ppd->vls_supported - 1) << 6252 SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); 6253 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); 6254 6255 qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); 6256 6257 /* enable tx header checking */ 6258 qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | 6259 IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | 6260 IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); 6261 6262 qib_write_kreg_port(ppd, krp_ncmodectrl, 6263 SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); 6264 6265 /* 6266 * Unconditionally clear the bufmask bits. If SDMA is 6267 * enabled, we'll set them appropriately later. 6268 */ 6269 qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); 6270 qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); 6271 qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); 6272 if (ppd->dd->cspec->r1) 6273 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); 6274 } 6275 6276 /* 6277 * Write the initialization per-device registers that need to be done at 6278 * driver load and after reset completes (i.e., that aren't done as part 6279 * of other init procedures called from qib_init.c). Also write per-port 6280 * registers that are affected by overall device config, such as QP mapping 6281 * Some of these should be redundant on reset, but play safe. 6282 */ 6283 static void write_7322_initregs(struct qib_devdata *dd) 6284 { 6285 struct qib_pportdata *ppd; 6286 int i, pidx; 6287 u64 val; 6288 6289 /* Set Multicast QPs received by port 2 to map to context one. */ 6290 qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); 6291 6292 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 6293 unsigned n, regno; 6294 unsigned long flags; 6295 6296 if (dd->n_krcv_queues < 2 || 6297 !dd->pport[pidx].link_speed_supported) 6298 continue; 6299 6300 ppd = &dd->pport[pidx]; 6301 6302 /* be paranoid against later code motion, etc. */ 6303 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); 6304 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); 6305 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); 6306 6307 /* Initialize QP to context mapping */ 6308 regno = krp_rcvqpmaptable; 6309 val = 0; 6310 if (dd->num_pports > 1) 6311 n = dd->first_user_ctxt / dd->num_pports; 6312 else 6313 n = dd->first_user_ctxt - 1; 6314 for (i = 0; i < 32; ) { 6315 unsigned ctxt; 6316 6317 if (dd->num_pports > 1) 6318 ctxt = (i % n) * dd->num_pports + pidx; 6319 else if (i % n) 6320 ctxt = (i % n) + 1; 6321 else 6322 ctxt = ppd->hw_pidx; 6323 val |= ctxt << (5 * (i % 6)); 6324 i++; 6325 if (i % 6 == 0) { 6326 qib_write_kreg_port(ppd, regno, val); 6327 val = 0; 6328 regno++; 6329 } 6330 } 6331 qib_write_kreg_port(ppd, regno, val); 6332 } 6333 6334 /* 6335 * Setup up interrupt mitigation for kernel contexts, but 6336 * not user contexts (user contexts use interrupts when 6337 * stalled waiting for any packet, so want those interrupts 6338 * right away). 6339 */ 6340 for (i = 0; i < dd->first_user_ctxt; i++) { 6341 dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; 6342 qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); 6343 } 6344 6345 /* 6346 * Initialize as (disabled) rcvflow tables. Application code 6347 * will setup each flow as it uses the flow. 6348 * Doesn't clear any of the error bits that might be set. 6349 */ 6350 val = TIDFLOW_ERRBITS; /* these are W1C */ 6351 for (i = 0; i < dd->cfgctxts; i++) { 6352 int flow; 6353 6354 for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) 6355 qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); 6356 } 6357 6358 /* 6359 * dual cards init to dual port recovery, single port cards to 6360 * the one port. Dual port cards may later adjust to 1 port, 6361 * and then back to dual port if both ports are connected 6362 * */ 6363 if (dd->num_pports) 6364 setup_7322_link_recovery(dd->pport, dd->num_pports > 1); 6365 } 6366 6367 static int qib_init_7322_variables(struct qib_devdata *dd) 6368 { 6369 struct qib_pportdata *ppd; 6370 unsigned features, pidx, sbufcnt; 6371 int ret, mtu; 6372 u32 sbufs, updthresh; 6373 resource_size_t vl15off; 6374 6375 /* pport structs are contiguous, allocated after devdata */ 6376 ppd = (struct qib_pportdata *)(dd + 1); 6377 dd->pport = ppd; 6378 ppd[0].dd = dd; 6379 ppd[1].dd = dd; 6380 6381 dd->cspec = (struct qib_chip_specific *)(ppd + 2); 6382 6383 ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); 6384 ppd[1].cpspec = &ppd[0].cpspec[1]; 6385 ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ 6386 ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ 6387 6388 spin_lock_init(&dd->cspec->rcvmod_lock); 6389 spin_lock_init(&dd->cspec->gpio_lock); 6390 6391 /* we haven't yet set QIB_PRESENT, so use read directly */ 6392 dd->revision = readq(&dd->kregbase[kr_revision]); 6393 6394 if ((dd->revision & 0xffffffffU) == 0xffffffffU) { 6395 qib_dev_err(dd, 6396 "Revision register read failure, giving up initialization\n"); 6397 ret = -ENODEV; 6398 goto bail; 6399 } 6400 dd->flags |= QIB_PRESENT; /* now register routines work */ 6401 6402 dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); 6403 dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); 6404 dd->cspec->r1 = dd->minrev == 1; 6405 6406 get_7322_chip_params(dd); 6407 features = qib_7322_boardname(dd); 6408 6409 /* now that piobcnt2k and 4k set, we can allocate these */ 6410 sbufcnt = dd->piobcnt2k + dd->piobcnt4k + 6411 NUM_VL15_BUFS + BITS_PER_LONG - 1; 6412 sbufcnt /= BITS_PER_LONG; 6413 dd->cspec->sendchkenable = 6414 kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendchkenable), 6415 GFP_KERNEL); 6416 dd->cspec->sendgrhchk = 6417 kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendgrhchk), 6418 GFP_KERNEL); 6419 dd->cspec->sendibchk = 6420 kmalloc_array(sbufcnt, sizeof(*dd->cspec->sendibchk), 6421 GFP_KERNEL); 6422 if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || 6423 !dd->cspec->sendibchk) { 6424 ret = -ENOMEM; 6425 goto bail; 6426 } 6427 6428 ppd = dd->pport; 6429 6430 /* 6431 * GPIO bits for TWSI data and clock, 6432 * used for serial EEPROM. 6433 */ 6434 dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; 6435 dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; 6436 dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; 6437 6438 dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | 6439 QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | 6440 QIB_HAS_THRESH_UPDATE | 6441 (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); 6442 dd->flags |= qib_special_trigger ? 6443 QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; 6444 6445 /* 6446 * Setup initial values. These may change when PAT is enabled, but 6447 * we need these to do initial chip register accesses. 6448 */ 6449 qib_7322_set_baseaddrs(dd); 6450 6451 mtu = ib_mtu_enum_to_int(qib_ibmtu); 6452 if (mtu == -1) 6453 mtu = QIB_DEFAULT_MTU; 6454 6455 dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; 6456 /* all hwerrors become interrupts, unless special purposed */ 6457 dd->cspec->hwerrmask = ~0ULL; 6458 /* link_recovery setup causes these errors, so ignore them, 6459 * other than clearing them when they occur */ 6460 dd->cspec->hwerrmask &= 6461 ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | 6462 SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | 6463 HWE_MASK(LATriggered)); 6464 6465 for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { 6466 struct qib_chippport_specific *cp = ppd->cpspec; 6467 6468 ppd->link_speed_supported = features & PORT_SPD_CAP; 6469 features >>= PORT_SPD_CAP_SHIFT; 6470 if (!ppd->link_speed_supported) { 6471 /* single port mode (7340, or configured) */ 6472 dd->skip_kctxt_mask |= 1 << pidx; 6473 if (pidx == 0) { 6474 /* Make sure port is disabled. */ 6475 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6476 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6477 ppd[0] = ppd[1]; 6478 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6479 IBSerdesPClkNotDetectMask_0) 6480 | SYM_MASK(HwErrMask, 6481 SDmaMemReadErrMask_0)); 6482 dd->cspec->int_enable_mask &= ~( 6483 SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | 6484 SYM_MASK(IntMask, SDmaIdleIntMask_0) | 6485 SYM_MASK(IntMask, SDmaProgressIntMask_0) | 6486 SYM_MASK(IntMask, SDmaIntMask_0) | 6487 SYM_MASK(IntMask, ErrIntMask_0) | 6488 SYM_MASK(IntMask, SendDoneIntMask_0)); 6489 } else { 6490 /* Make sure port is disabled. */ 6491 qib_write_kreg_port(ppd, krp_rcvctrl, 0); 6492 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); 6493 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, 6494 IBSerdesPClkNotDetectMask_1) 6495 | SYM_MASK(HwErrMask, 6496 SDmaMemReadErrMask_1)); 6497 dd->cspec->int_enable_mask &= ~( 6498 SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | 6499 SYM_MASK(IntMask, SDmaIdleIntMask_1) | 6500 SYM_MASK(IntMask, SDmaProgressIntMask_1) | 6501 SYM_MASK(IntMask, SDmaIntMask_1) | 6502 SYM_MASK(IntMask, ErrIntMask_1) | 6503 SYM_MASK(IntMask, SendDoneIntMask_1)); 6504 } 6505 continue; 6506 } 6507 6508 dd->num_pports++; 6509 ret = qib_init_pportdata(ppd, dd, pidx, dd->num_pports); 6510 if (ret) { 6511 dd->num_pports--; 6512 goto bail; 6513 } 6514 6515 ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; 6516 ppd->link_width_enabled = IB_WIDTH_4X; 6517 ppd->link_speed_enabled = ppd->link_speed_supported; 6518 /* 6519 * Set the initial values to reasonable default, will be set 6520 * for real when link is up. 6521 */ 6522 ppd->link_width_active = IB_WIDTH_4X; 6523 ppd->link_speed_active = QIB_IB_SDR; 6524 ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; 6525 switch (qib_num_cfg_vls) { 6526 case 1: 6527 ppd->vls_supported = IB_VL_VL0; 6528 break; 6529 case 2: 6530 ppd->vls_supported = IB_VL_VL0_1; 6531 break; 6532 default: 6533 qib_devinfo(dd->pcidev, 6534 "Invalid num_vls %u, using 4 VLs\n", 6535 qib_num_cfg_vls); 6536 qib_num_cfg_vls = 4; 6537 /* fall through */ 6538 case 4: 6539 ppd->vls_supported = IB_VL_VL0_3; 6540 break; 6541 case 8: 6542 if (mtu <= 2048) 6543 ppd->vls_supported = IB_VL_VL0_7; 6544 else { 6545 qib_devinfo(dd->pcidev, 6546 "Invalid num_vls %u for MTU %d , using 4 VLs\n", 6547 qib_num_cfg_vls, mtu); 6548 ppd->vls_supported = IB_VL_VL0_3; 6549 qib_num_cfg_vls = 4; 6550 } 6551 break; 6552 } 6553 ppd->vls_operational = ppd->vls_supported; 6554 6555 init_waitqueue_head(&cp->autoneg_wait); 6556 INIT_DELAYED_WORK(&cp->autoneg_work, 6557 autoneg_7322_work); 6558 if (ppd->dd->cspec->r1) 6559 INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); 6560 6561 /* 6562 * For Mez and similar cards, no qsfp info, so do 6563 * the "cable info" setup here. Can be overridden 6564 * in adapter-specific routines. 6565 */ 6566 if (!(dd->flags & QIB_HAS_QSFP)) { 6567 if (!IS_QMH(dd) && !IS_QME(dd)) 6568 qib_devinfo(dd->pcidev, 6569 "IB%u:%u: Unknown mezzanine card type\n", 6570 dd->unit, ppd->port); 6571 cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; 6572 /* 6573 * Choose center value as default tx serdes setting 6574 * until changed through module parameter. 6575 */ 6576 ppd->cpspec->no_eep = IS_QMH(dd) ? 6577 TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; 6578 } else 6579 cp->h1_val = H1_FORCE_VAL; 6580 6581 /* Avoid writes to chip for mini_init */ 6582 if (!qib_mini_init) 6583 write_7322_init_portregs(ppd); 6584 6585 timer_setup(&cp->chase_timer, reenable_chase, 0); 6586 6587 ppd++; 6588 } 6589 6590 dd->rcvhdrentsize = qib_rcvhdrentsize ? 6591 qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE; 6592 dd->rcvhdrsize = qib_rcvhdrsize ? 6593 qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE; 6594 dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); 6595 6596 /* we always allocate at least 2048 bytes for eager buffers */ 6597 dd->rcvegrbufsize = max(mtu, 2048); 6598 dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); 6599 6600 qib_7322_tidtemplate(dd); 6601 6602 /* 6603 * We can request a receive interrupt for 1 or 6604 * more packets from current offset. 6605 */ 6606 dd->rhdrhead_intr_off = 6607 (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; 6608 6609 /* setup the stats timer; the add_timer is done at end of init */ 6610 timer_setup(&dd->stats_timer, qib_get_7322_faststats, 0); 6611 6612 dd->ureg_align = 0x10000; /* 64KB alignment */ 6613 6614 dd->piosize2kmax_dwords = dd->piosize2k >> 2; 6615 6616 qib_7322_config_ctxts(dd); 6617 qib_set_ctxtcnt(dd); 6618 6619 /* 6620 * We do not set WC on the VL15 buffers to avoid 6621 * a rare problem with unaligned writes from 6622 * interrupt-flushed store buffers, so we need 6623 * to map those separately here. We can't solve 6624 * this for the rarely used mtrr case. 6625 */ 6626 ret = init_chip_wc_pat(dd, 0); 6627 if (ret) 6628 goto bail; 6629 6630 /* vl15 buffers start just after the 4k buffers */ 6631 vl15off = dd->physaddr + (dd->piobufbase >> 32) + 6632 dd->piobcnt4k * dd->align4k; 6633 dd->piovl15base = ioremap(vl15off, 6634 NUM_VL15_BUFS * dd->align4k); 6635 if (!dd->piovl15base) { 6636 ret = -ENOMEM; 6637 goto bail; 6638 } 6639 6640 qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ 6641 6642 ret = 0; 6643 if (qib_mini_init) 6644 goto bail; 6645 if (!dd->num_pports) { 6646 qib_dev_err(dd, "No ports enabled, giving up initialization\n"); 6647 goto bail; /* no error, so can still figure out why err */ 6648 } 6649 6650 write_7322_initregs(dd); 6651 ret = qib_create_ctxts(dd); 6652 init_7322_cntrnames(dd); 6653 6654 updthresh = 8U; /* update threshold */ 6655 6656 /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. 6657 * reserve the update threshold amount for other kernel use, such 6658 * as sending SMI, MAD, and ACKs, or 3, whichever is greater, 6659 * unless we aren't enabling SDMA, in which case we want to use 6660 * all the 4k bufs for the kernel. 6661 * if this was less than the update threshold, we could wait 6662 * a long time for an update. Coded this way because we 6663 * sometimes change the update threshold for various reasons, 6664 * and we want this to remain robust. 6665 */ 6666 if (dd->flags & QIB_HAS_SEND_DMA) { 6667 dd->cspec->sdmabufcnt = dd->piobcnt4k; 6668 sbufs = updthresh > 3 ? updthresh : 3; 6669 } else { 6670 dd->cspec->sdmabufcnt = 0; 6671 sbufs = dd->piobcnt4k; 6672 } 6673 dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - 6674 dd->cspec->sdmabufcnt; 6675 dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; 6676 dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ 6677 dd->last_pio = dd->cspec->lastbuf_for_pio; 6678 dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? 6679 dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; 6680 6681 /* 6682 * If we have 16 user contexts, we will have 7 sbufs 6683 * per context, so reduce the update threshold to match. We 6684 * want to update before we actually run out, at low pbufs/ctxt 6685 * so give ourselves some margin. 6686 */ 6687 if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) 6688 updthresh = dd->pbufsctxt - 2; 6689 dd->cspec->updthresh_dflt = updthresh; 6690 dd->cspec->updthresh = updthresh; 6691 6692 /* before full enable, no interrupts, no locking needed */ 6693 dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) 6694 << SYM_LSB(SendCtrl, AvailUpdThld)) | 6695 SYM_MASK(SendCtrl, SendBufAvailPad64Byte); 6696 6697 dd->psxmitwait_supported = 1; 6698 dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; 6699 bail: 6700 if (!dd->ctxtcnt) 6701 dd->ctxtcnt = 1; /* for other initialization code */ 6702 6703 return ret; 6704 } 6705 6706 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, 6707 u32 *pbufnum) 6708 { 6709 u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; 6710 struct qib_devdata *dd = ppd->dd; 6711 6712 /* last is same for 2k and 4k, because we use 4k if all 2k busy */ 6713 if (pbc & PBC_7322_VL15_SEND) { 6714 first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; 6715 last = first; 6716 } else { 6717 if ((plen + 1) > dd->piosize2kmax_dwords) 6718 first = dd->piobcnt2k; 6719 else 6720 first = 0; 6721 last = dd->cspec->lastbuf_for_pio; 6722 } 6723 return qib_getsendbuf_range(dd, pbufnum, first, last); 6724 } 6725 6726 static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, 6727 u32 start) 6728 { 6729 qib_write_kreg_port(ppd, krp_psinterval, intv); 6730 qib_write_kreg_port(ppd, krp_psstart, start); 6731 } 6732 6733 /* 6734 * Must be called with sdma_lock held, or before init finished. 6735 */ 6736 static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) 6737 { 6738 qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); 6739 } 6740 6741 /* 6742 * sdma_lock should be acquired before calling this routine 6743 */ 6744 static void dump_sdma_7322_state(struct qib_pportdata *ppd) 6745 { 6746 u64 reg, reg1, reg2; 6747 6748 reg = qib_read_kreg_port(ppd, krp_senddmastatus); 6749 qib_dev_porterr(ppd->dd, ppd->port, 6750 "SDMA senddmastatus: 0x%016llx\n", reg); 6751 6752 reg = qib_read_kreg_port(ppd, krp_sendctrl); 6753 qib_dev_porterr(ppd->dd, ppd->port, 6754 "SDMA sendctrl: 0x%016llx\n", reg); 6755 6756 reg = qib_read_kreg_port(ppd, krp_senddmabase); 6757 qib_dev_porterr(ppd->dd, ppd->port, 6758 "SDMA senddmabase: 0x%016llx\n", reg); 6759 6760 reg = qib_read_kreg_port(ppd, krp_senddmabufmask0); 6761 reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1); 6762 reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2); 6763 qib_dev_porterr(ppd->dd, ppd->port, 6764 "SDMA senddmabufmask 0:%llx 1:%llx 2:%llx\n", 6765 reg, reg1, reg2); 6766 6767 /* get bufuse bits, clear them, and print them again if non-zero */ 6768 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6769 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg); 6770 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6771 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1); 6772 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6773 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2); 6774 /* 0 and 1 should always be zero, so print as short form */ 6775 qib_dev_porterr(ppd->dd, ppd->port, 6776 "SDMA current senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6777 reg, reg1, reg2); 6778 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); 6779 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); 6780 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); 6781 /* 0 and 1 should always be zero, so print as short form */ 6782 qib_dev_porterr(ppd->dd, ppd->port, 6783 "SDMA cleared senddmabuf_use 0:%llx 1:%llx 2:%llx\n", 6784 reg, reg1, reg2); 6785 6786 reg = qib_read_kreg_port(ppd, krp_senddmatail); 6787 qib_dev_porterr(ppd->dd, ppd->port, 6788 "SDMA senddmatail: 0x%016llx\n", reg); 6789 6790 reg = qib_read_kreg_port(ppd, krp_senddmahead); 6791 qib_dev_porterr(ppd->dd, ppd->port, 6792 "SDMA senddmahead: 0x%016llx\n", reg); 6793 6794 reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr); 6795 qib_dev_porterr(ppd->dd, ppd->port, 6796 "SDMA senddmaheadaddr: 0x%016llx\n", reg); 6797 6798 reg = qib_read_kreg_port(ppd, krp_senddmalengen); 6799 qib_dev_porterr(ppd->dd, ppd->port, 6800 "SDMA senddmalengen: 0x%016llx\n", reg); 6801 6802 reg = qib_read_kreg_port(ppd, krp_senddmadesccnt); 6803 qib_dev_porterr(ppd->dd, ppd->port, 6804 "SDMA senddmadesccnt: 0x%016llx\n", reg); 6805 6806 reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt); 6807 qib_dev_porterr(ppd->dd, ppd->port, 6808 "SDMA senddmaidlecnt: 0x%016llx\n", reg); 6809 6810 reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld); 6811 qib_dev_porterr(ppd->dd, ppd->port, 6812 "SDMA senddmapriorityhld: 0x%016llx\n", reg); 6813 6814 reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt); 6815 qib_dev_porterr(ppd->dd, ppd->port, 6816 "SDMA senddmareloadcnt: 0x%016llx\n", reg); 6817 6818 dump_sdma_state(ppd); 6819 } 6820 6821 static struct sdma_set_state_action sdma_7322_action_table[] = { 6822 [qib_sdma_state_s00_hw_down] = { 6823 .go_s99_running_tofalse = 1, 6824 .op_enable = 0, 6825 .op_intenable = 0, 6826 .op_halt = 0, 6827 .op_drain = 0, 6828 }, 6829 [qib_sdma_state_s10_hw_start_up_wait] = { 6830 .op_enable = 0, 6831 .op_intenable = 1, 6832 .op_halt = 1, 6833 .op_drain = 0, 6834 }, 6835 [qib_sdma_state_s20_idle] = { 6836 .op_enable = 1, 6837 .op_intenable = 1, 6838 .op_halt = 1, 6839 .op_drain = 0, 6840 }, 6841 [qib_sdma_state_s30_sw_clean_up_wait] = { 6842 .op_enable = 0, 6843 .op_intenable = 1, 6844 .op_halt = 1, 6845 .op_drain = 0, 6846 }, 6847 [qib_sdma_state_s40_hw_clean_up_wait] = { 6848 .op_enable = 1, 6849 .op_intenable = 1, 6850 .op_halt = 1, 6851 .op_drain = 0, 6852 }, 6853 [qib_sdma_state_s50_hw_halt_wait] = { 6854 .op_enable = 1, 6855 .op_intenable = 1, 6856 .op_halt = 1, 6857 .op_drain = 1, 6858 }, 6859 [qib_sdma_state_s99_running] = { 6860 .op_enable = 1, 6861 .op_intenable = 1, 6862 .op_halt = 0, 6863 .op_drain = 0, 6864 .go_s99_running_totrue = 1, 6865 }, 6866 }; 6867 6868 static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) 6869 { 6870 ppd->sdma_state.set_state_action = sdma_7322_action_table; 6871 } 6872 6873 static int init_sdma_7322_regs(struct qib_pportdata *ppd) 6874 { 6875 struct qib_devdata *dd = ppd->dd; 6876 unsigned lastbuf, erstbuf; 6877 u64 senddmabufmask[3] = { 0 }; 6878 int n, ret = 0; 6879 6880 qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); 6881 qib_sdma_7322_setlengen(ppd); 6882 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ 6883 qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); 6884 qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); 6885 qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); 6886 6887 if (dd->num_pports) 6888 n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ 6889 else 6890 n = dd->cspec->sdmabufcnt; /* failsafe for init */ 6891 erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - 6892 ((dd->num_pports == 1 || ppd->port == 2) ? n : 6893 dd->cspec->sdmabufcnt); 6894 lastbuf = erstbuf + n; 6895 6896 ppd->sdma_state.first_sendbuf = erstbuf; 6897 ppd->sdma_state.last_sendbuf = lastbuf; 6898 for (; erstbuf < lastbuf; ++erstbuf) { 6899 unsigned word = erstbuf / BITS_PER_LONG; 6900 unsigned bit = erstbuf & (BITS_PER_LONG - 1); 6901 6902 senddmabufmask[word] |= 1ULL << bit; 6903 } 6904 qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); 6905 qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); 6906 qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); 6907 return ret; 6908 } 6909 6910 /* sdma_lock must be held */ 6911 static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) 6912 { 6913 struct qib_devdata *dd = ppd->dd; 6914 int sane; 6915 int use_dmahead; 6916 u16 swhead; 6917 u16 swtail; 6918 u16 cnt; 6919 u16 hwhead; 6920 6921 use_dmahead = __qib_sdma_running(ppd) && 6922 (dd->flags & QIB_HAS_SDMA_TIMEOUT); 6923 retry: 6924 hwhead = use_dmahead ? 6925 (u16) le64_to_cpu(*ppd->sdma_head_dma) : 6926 (u16) qib_read_kreg_port(ppd, krp_senddmahead); 6927 6928 swhead = ppd->sdma_descq_head; 6929 swtail = ppd->sdma_descq_tail; 6930 cnt = ppd->sdma_descq_cnt; 6931 6932 if (swhead < swtail) 6933 /* not wrapped */ 6934 sane = (hwhead >= swhead) & (hwhead <= swtail); 6935 else if (swhead > swtail) 6936 /* wrapped around */ 6937 sane = ((hwhead >= swhead) && (hwhead < cnt)) || 6938 (hwhead <= swtail); 6939 else 6940 /* empty */ 6941 sane = (hwhead == swhead); 6942 6943 if (unlikely(!sane)) { 6944 if (use_dmahead) { 6945 /* try one more time, directly from the register */ 6946 use_dmahead = 0; 6947 goto retry; 6948 } 6949 /* proceed as if no progress */ 6950 hwhead = swhead; 6951 } 6952 6953 return hwhead; 6954 } 6955 6956 static int qib_sdma_7322_busy(struct qib_pportdata *ppd) 6957 { 6958 u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); 6959 6960 return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || 6961 (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || 6962 !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || 6963 !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); 6964 } 6965 6966 /* 6967 * Compute the amount of delay before sending the next packet if the 6968 * port's send rate differs from the static rate set for the QP. 6969 * The delay affects the next packet and the amount of the delay is 6970 * based on the length of the this packet. 6971 */ 6972 static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, 6973 u8 srate, u8 vl) 6974 { 6975 u8 snd_mult = ppd->delay_mult; 6976 u8 rcv_mult = ib_rate_to_delay[srate]; 6977 u32 ret; 6978 6979 ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; 6980 6981 /* Indicate VL15, else set the VL in the control word */ 6982 if (vl == 15) 6983 ret |= PBC_7322_VL15_SEND_CTRL; 6984 else 6985 ret |= vl << PBC_VL_NUM_LSB; 6986 ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; 6987 6988 return ret; 6989 } 6990 6991 /* 6992 * Enable the per-port VL15 send buffers for use. 6993 * They follow the rest of the buffers, without a config parameter. 6994 * This was in initregs, but that is done before the shadow 6995 * is set up, and this has to be done after the shadow is 6996 * set up. 6997 */ 6998 static void qib_7322_initvl15_bufs(struct qib_devdata *dd) 6999 { 7000 unsigned vl15bufs; 7001 7002 vl15bufs = dd->piobcnt2k + dd->piobcnt4k; 7003 qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, 7004 TXCHK_CHG_TYPE_KERN, NULL); 7005 } 7006 7007 static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) 7008 { 7009 if (rcd->ctxt < NUM_IB_PORTS) { 7010 if (rcd->dd->num_pports > 1) { 7011 rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; 7012 rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; 7013 } else { 7014 rcd->rcvegrcnt = KCTXT0_EGRCNT; 7015 rcd->rcvegr_tid_base = 0; 7016 } 7017 } else { 7018 rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; 7019 rcd->rcvegr_tid_base = KCTXT0_EGRCNT + 7020 (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; 7021 } 7022 } 7023 7024 #define QTXSLEEPS 5000 7025 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, 7026 u32 len, u32 which, struct qib_ctxtdata *rcd) 7027 { 7028 int i; 7029 const int last = start + len - 1; 7030 const int lastr = last / BITS_PER_LONG; 7031 u32 sleeps = 0; 7032 int wait = rcd != NULL; 7033 unsigned long flags; 7034 7035 while (wait) { 7036 unsigned long shadow = 0; 7037 int cstart, previ = -1; 7038 7039 /* 7040 * when flipping from kernel to user, we can't change 7041 * the checking type if the buffer is allocated to the 7042 * driver. It's OK the other direction, because it's 7043 * from close, and we have just disarm'ed all the 7044 * buffers. All the kernel to kernel changes are also 7045 * OK. 7046 */ 7047 for (cstart = start; cstart <= last; cstart++) { 7048 i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7049 / BITS_PER_LONG; 7050 if (i != previ) { 7051 shadow = (unsigned long) 7052 le64_to_cpu(dd->pioavailregs_dma[i]); 7053 previ = i; 7054 } 7055 if (test_bit(((2 * cstart) + 7056 QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) 7057 % BITS_PER_LONG, &shadow)) 7058 break; 7059 } 7060 7061 if (cstart > last) 7062 break; 7063 7064 if (sleeps == QTXSLEEPS) 7065 break; 7066 /* make sure we see an updated copy next time around */ 7067 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7068 sleeps++; 7069 msleep(20); 7070 } 7071 7072 switch (which) { 7073 case TXCHK_CHG_TYPE_DIS1: 7074 /* 7075 * disable checking on a range; used by diags; just 7076 * one buffer, but still written generically 7077 */ 7078 for (i = start; i <= last; i++) 7079 clear_bit(i, dd->cspec->sendchkenable); 7080 break; 7081 7082 case TXCHK_CHG_TYPE_ENAB1: 7083 /* 7084 * (re)enable checking on a range; used by diags; just 7085 * one buffer, but still written generically; read 7086 * scratch to be sure buffer actually triggered, not 7087 * just flushed from processor. 7088 */ 7089 qib_read_kreg32(dd, kr_scratch); 7090 for (i = start; i <= last; i++) 7091 set_bit(i, dd->cspec->sendchkenable); 7092 break; 7093 7094 case TXCHK_CHG_TYPE_KERN: 7095 /* usable by kernel */ 7096 for (i = start; i <= last; i++) { 7097 set_bit(i, dd->cspec->sendibchk); 7098 clear_bit(i, dd->cspec->sendgrhchk); 7099 } 7100 spin_lock_irqsave(&dd->uctxt_lock, flags); 7101 /* see if we need to raise avail update threshold */ 7102 for (i = dd->first_user_ctxt; 7103 dd->cspec->updthresh != dd->cspec->updthresh_dflt 7104 && i < dd->cfgctxts; i++) 7105 if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && 7106 ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) 7107 < dd->cspec->updthresh_dflt) 7108 break; 7109 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 7110 if (i == dd->cfgctxts) { 7111 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7112 dd->cspec->updthresh = dd->cspec->updthresh_dflt; 7113 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7114 dd->sendctrl |= (dd->cspec->updthresh & 7115 SYM_RMASK(SendCtrl, AvailUpdThld)) << 7116 SYM_LSB(SendCtrl, AvailUpdThld); 7117 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7118 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7119 } 7120 break; 7121 7122 case TXCHK_CHG_TYPE_USER: 7123 /* for user process */ 7124 for (i = start; i <= last; i++) { 7125 clear_bit(i, dd->cspec->sendibchk); 7126 set_bit(i, dd->cspec->sendgrhchk); 7127 } 7128 spin_lock_irqsave(&dd->sendctrl_lock, flags); 7129 if (rcd && rcd->subctxt_cnt && ((rcd->piocnt 7130 / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { 7131 dd->cspec->updthresh = (rcd->piocnt / 7132 rcd->subctxt_cnt) - 1; 7133 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); 7134 dd->sendctrl |= (dd->cspec->updthresh & 7135 SYM_RMASK(SendCtrl, AvailUpdThld)) 7136 << SYM_LSB(SendCtrl, AvailUpdThld); 7137 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7138 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); 7139 } else 7140 spin_unlock_irqrestore(&dd->sendctrl_lock, flags); 7141 break; 7142 7143 default: 7144 break; 7145 } 7146 7147 for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) 7148 qib_write_kreg(dd, kr_sendcheckmask + i, 7149 dd->cspec->sendchkenable[i]); 7150 7151 for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { 7152 qib_write_kreg(dd, kr_sendgrhcheckmask + i, 7153 dd->cspec->sendgrhchk[i]); 7154 qib_write_kreg(dd, kr_sendibpktmask + i, 7155 dd->cspec->sendibchk[i]); 7156 } 7157 7158 /* 7159 * Be sure whatever we did was seen by the chip and acted upon, 7160 * before we return. Mostly important for which >= 2. 7161 */ 7162 qib_read_kreg32(dd, kr_scratch); 7163 } 7164 7165 7166 /* useful for trigger analyzers, etc. */ 7167 static void writescratch(struct qib_devdata *dd, u32 val) 7168 { 7169 qib_write_kreg(dd, kr_scratch, val); 7170 } 7171 7172 /* Dummy for now, use chip regs soon */ 7173 static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) 7174 { 7175 return -ENXIO; 7176 } 7177 7178 /** 7179 * qib_init_iba7322_funcs - set up the chip-specific function pointers 7180 * @dev: the pci_dev for qlogic_ib device 7181 * @ent: pci_device_id struct for this dev 7182 * 7183 * Also allocates, inits, and returns the devdata struct for this 7184 * device instance 7185 * 7186 * This is global, and is called directly at init to set up the 7187 * chip-specific function pointers for later use. 7188 */ 7189 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, 7190 const struct pci_device_id *ent) 7191 { 7192 struct qib_devdata *dd; 7193 int ret, i; 7194 u32 tabsize, actual_cnt = 0; 7195 7196 dd = qib_alloc_devdata(pdev, 7197 NUM_IB_PORTS * sizeof(struct qib_pportdata) + 7198 sizeof(struct qib_chip_specific) + 7199 NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); 7200 if (IS_ERR(dd)) 7201 goto bail; 7202 7203 dd->f_bringup_serdes = qib_7322_bringup_serdes; 7204 dd->f_cleanup = qib_setup_7322_cleanup; 7205 dd->f_clear_tids = qib_7322_clear_tids; 7206 dd->f_free_irq = qib_7322_free_irq; 7207 dd->f_get_base_info = qib_7322_get_base_info; 7208 dd->f_get_msgheader = qib_7322_get_msgheader; 7209 dd->f_getsendbuf = qib_7322_getsendbuf; 7210 dd->f_gpio_mod = gpio_7322_mod; 7211 dd->f_eeprom_wen = qib_7322_eeprom_wen; 7212 dd->f_hdrqempty = qib_7322_hdrqempty; 7213 dd->f_ib_updown = qib_7322_ib_updown; 7214 dd->f_init_ctxt = qib_7322_init_ctxt; 7215 dd->f_initvl15_bufs = qib_7322_initvl15_bufs; 7216 dd->f_intr_fallback = qib_7322_intr_fallback; 7217 dd->f_late_initreg = qib_late_7322_initreg; 7218 dd->f_setpbc_control = qib_7322_setpbc_control; 7219 dd->f_portcntr = qib_portcntr_7322; 7220 dd->f_put_tid = qib_7322_put_tid; 7221 dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; 7222 dd->f_rcvctrl = rcvctrl_7322_mod; 7223 dd->f_read_cntrs = qib_read_7322cntrs; 7224 dd->f_read_portcntrs = qib_read_7322portcntrs; 7225 dd->f_reset = qib_do_7322_reset; 7226 dd->f_init_sdma_regs = init_sdma_7322_regs; 7227 dd->f_sdma_busy = qib_sdma_7322_busy; 7228 dd->f_sdma_gethead = qib_sdma_7322_gethead; 7229 dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; 7230 dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; 7231 dd->f_sdma_update_tail = qib_sdma_update_7322_tail; 7232 dd->f_sendctrl = sendctrl_7322_mod; 7233 dd->f_set_armlaunch = qib_set_7322_armlaunch; 7234 dd->f_set_cntr_sample = qib_set_cntr_7322_sample; 7235 dd->f_iblink_state = qib_7322_iblink_state; 7236 dd->f_ibphys_portstate = qib_7322_phys_portstate; 7237 dd->f_get_ib_cfg = qib_7322_get_ib_cfg; 7238 dd->f_set_ib_cfg = qib_7322_set_ib_cfg; 7239 dd->f_set_ib_loopback = qib_7322_set_loopback; 7240 dd->f_get_ib_table = qib_7322_get_ib_table; 7241 dd->f_set_ib_table = qib_7322_set_ib_table; 7242 dd->f_set_intr_state = qib_7322_set_intr_state; 7243 dd->f_setextled = qib_setup_7322_setextled; 7244 dd->f_txchk_change = qib_7322_txchk_change; 7245 dd->f_update_usrhead = qib_update_7322_usrhead; 7246 dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; 7247 dd->f_xgxs_reset = qib_7322_mini_pcs_reset; 7248 dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; 7249 dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; 7250 dd->f_sdma_init_early = qib_7322_sdma_init_early; 7251 dd->f_writescratch = writescratch; 7252 dd->f_tempsense_rd = qib_7322_tempsense_rd; 7253 #ifdef CONFIG_INFINIBAND_QIB_DCA 7254 dd->f_notify_dca = qib_7322_notify_dca; 7255 #endif 7256 /* 7257 * Do remaining PCIe setup and save PCIe values in dd. 7258 * Any error printing is already done by the init code. 7259 * On return, we have the chip mapped, but chip registers 7260 * are not set up until start of qib_init_7322_variables. 7261 */ 7262 ret = qib_pcie_ddinit(dd, pdev, ent); 7263 if (ret < 0) 7264 goto bail_free; 7265 7266 /* initialize chip-specific variables */ 7267 ret = qib_init_7322_variables(dd); 7268 if (ret) 7269 goto bail_cleanup; 7270 7271 if (qib_mini_init || !dd->num_pports) 7272 goto bail; 7273 7274 /* 7275 * Determine number of vectors we want; depends on port count 7276 * and number of configured kernel receive queues actually used. 7277 * Should also depend on whether sdma is enabled or not, but 7278 * that's such a rare testing case it's not worth worrying about. 7279 */ 7280 tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); 7281 for (i = 0; i < tabsize; i++) 7282 if ((i < ARRAY_SIZE(irq_table) && 7283 irq_table[i].port <= dd->num_pports) || 7284 (i >= ARRAY_SIZE(irq_table) && 7285 dd->rcd[i - ARRAY_SIZE(irq_table)])) 7286 actual_cnt++; 7287 /* reduce by ctxt's < 2 */ 7288 if (qib_krcvq01_no_msi) 7289 actual_cnt -= dd->num_pports; 7290 7291 tabsize = actual_cnt; 7292 dd->cspec->msix_entries = kcalloc(tabsize, 7293 sizeof(struct qib_msix_entry), 7294 GFP_KERNEL); 7295 if (!dd->cspec->msix_entries) 7296 tabsize = 0; 7297 7298 if (qib_pcie_params(dd, 8, &tabsize)) 7299 qib_dev_err(dd, 7300 "Failed to setup PCIe or interrupts; continuing anyway\n"); 7301 /* may be less than we wanted, if not enough available */ 7302 dd->cspec->num_msix_entries = tabsize; 7303 7304 /* setup interrupt handler */ 7305 qib_setup_7322_interrupt(dd, 1); 7306 7307 /* clear diagctrl register, in case diags were running and crashed */ 7308 qib_write_kreg(dd, kr_hwdiagctrl, 0); 7309 #ifdef CONFIG_INFINIBAND_QIB_DCA 7310 if (!dca_add_requester(&pdev->dev)) { 7311 qib_devinfo(dd->pcidev, "DCA enabled\n"); 7312 dd->flags |= QIB_DCA_ENABLED; 7313 qib_setup_dca(dd); 7314 } 7315 #endif 7316 goto bail; 7317 7318 bail_cleanup: 7319 qib_pcie_ddcleanup(dd); 7320 bail_free: 7321 qib_free_devdata(dd); 7322 dd = ERR_PTR(ret); 7323 bail: 7324 return dd; 7325 } 7326 7327 /* 7328 * Set the table entry at the specified index from the table specifed. 7329 * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first 7330 * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. 7331 * 'idx' below addresses the correct entry, while its 4 LSBs select the 7332 * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. 7333 */ 7334 #define DDS_ENT_AMP_LSB 14 7335 #define DDS_ENT_MAIN_LSB 9 7336 #define DDS_ENT_POST_LSB 5 7337 #define DDS_ENT_PRE_XTRA_LSB 3 7338 #define DDS_ENT_PRE_LSB 0 7339 7340 /* 7341 * Set one entry in the TxDDS table for spec'd port 7342 * ridx picks one of the entries, while tp points 7343 * to the appropriate table entry. 7344 */ 7345 static void set_txdds(struct qib_pportdata *ppd, int ridx, 7346 const struct txdds_ent *tp) 7347 { 7348 struct qib_devdata *dd = ppd->dd; 7349 u32 pack_ent; 7350 int regidx; 7351 7352 /* Get correct offset in chip-space, and in source table */ 7353 regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; 7354 /* 7355 * We do not use qib_write_kreg_port() because it was intended 7356 * only for registers in the lower "port specific" pages. 7357 * So do index calculation by hand. 7358 */ 7359 if (ppd->hw_pidx) 7360 regidx += (dd->palign / sizeof(u64)); 7361 7362 pack_ent = tp->amp << DDS_ENT_AMP_LSB; 7363 pack_ent |= tp->main << DDS_ENT_MAIN_LSB; 7364 pack_ent |= tp->pre << DDS_ENT_PRE_LSB; 7365 pack_ent |= tp->post << DDS_ENT_POST_LSB; 7366 qib_write_kreg(dd, regidx, pack_ent); 7367 /* Prevent back-to-back writes by hitting scratch */ 7368 qib_write_kreg(ppd->dd, kr_scratch, 0); 7369 } 7370 7371 static const struct vendor_txdds_ent vendor_txdds[] = { 7372 { /* Amphenol 1m 30awg NoEq */ 7373 { 0x41, 0x50, 0x48 }, "584470002 ", 7374 { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, 7375 }, 7376 { /* Amphenol 3m 28awg NoEq */ 7377 { 0x41, 0x50, 0x48 }, "584470004 ", 7378 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, 7379 }, 7380 { /* Finisar 3m OM2 Optical */ 7381 { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", 7382 { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, 7383 }, 7384 { /* Finisar 30m OM2 Optical */ 7385 { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", 7386 { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, 7387 }, 7388 { /* Finisar Default OM2 Optical */ 7389 { 0x00, 0x90, 0x65 }, NULL, 7390 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, 7391 }, 7392 { /* Gore 1m 30awg NoEq */ 7393 { 0x00, 0x21, 0x77 }, "QSN3300-1 ", 7394 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, 7395 }, 7396 { /* Gore 2m 30awg NoEq */ 7397 { 0x00, 0x21, 0x77 }, "QSN3300-2 ", 7398 { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, 7399 }, 7400 { /* Gore 1m 28awg NoEq */ 7401 { 0x00, 0x21, 0x77 }, "QSN3800-1 ", 7402 { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, 7403 }, 7404 { /* Gore 3m 28awg NoEq */ 7405 { 0x00, 0x21, 0x77 }, "QSN3800-3 ", 7406 { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, 7407 }, 7408 { /* Gore 5m 24awg Eq */ 7409 { 0x00, 0x21, 0x77 }, "QSN7000-5 ", 7410 { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, 7411 }, 7412 { /* Gore 7m 24awg Eq */ 7413 { 0x00, 0x21, 0x77 }, "QSN7000-7 ", 7414 { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, 7415 }, 7416 { /* Gore 5m 26awg Eq */ 7417 { 0x00, 0x21, 0x77 }, "QSN7600-5 ", 7418 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, 7419 }, 7420 { /* Gore 7m 26awg Eq */ 7421 { 0x00, 0x21, 0x77 }, "QSN7600-7 ", 7422 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, 7423 }, 7424 { /* Intersil 12m 24awg Active */ 7425 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", 7426 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, 7427 }, 7428 { /* Intersil 10m 28awg Active */ 7429 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", 7430 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, 7431 }, 7432 { /* Intersil 7m 30awg Active */ 7433 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", 7434 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, 7435 }, 7436 { /* Intersil 5m 32awg Active */ 7437 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", 7438 { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, 7439 }, 7440 { /* Intersil Default Active */ 7441 { 0x00, 0x30, 0xB4 }, NULL, 7442 { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, 7443 }, 7444 { /* Luxtera 20m Active Optical */ 7445 { 0x00, 0x25, 0x63 }, NULL, 7446 { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, 7447 }, 7448 { /* Molex 1M Cu loopback */ 7449 { 0x00, 0x09, 0x3A }, "74763-0025 ", 7450 { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, 7451 }, 7452 { /* Molex 2m 28awg NoEq */ 7453 { 0x00, 0x09, 0x3A }, "74757-2201 ", 7454 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, 7455 }, 7456 }; 7457 7458 static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { 7459 /* amp, pre, main, post */ 7460 { 2, 2, 15, 6 }, /* Loopback */ 7461 { 0, 0, 0, 1 }, /* 2 dB */ 7462 { 0, 0, 0, 2 }, /* 3 dB */ 7463 { 0, 0, 0, 3 }, /* 4 dB */ 7464 { 0, 0, 0, 4 }, /* 5 dB */ 7465 { 0, 0, 0, 5 }, /* 6 dB */ 7466 { 0, 0, 0, 6 }, /* 7 dB */ 7467 { 0, 0, 0, 7 }, /* 8 dB */ 7468 { 0, 0, 0, 8 }, /* 9 dB */ 7469 { 0, 0, 0, 9 }, /* 10 dB */ 7470 { 0, 0, 0, 10 }, /* 11 dB */ 7471 { 0, 0, 0, 11 }, /* 12 dB */ 7472 { 0, 0, 0, 12 }, /* 13 dB */ 7473 { 0, 0, 0, 13 }, /* 14 dB */ 7474 { 0, 0, 0, 14 }, /* 15 dB */ 7475 { 0, 0, 0, 15 }, /* 16 dB */ 7476 }; 7477 7478 static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { 7479 /* amp, pre, main, post */ 7480 { 2, 2, 15, 6 }, /* Loopback */ 7481 { 0, 0, 0, 8 }, /* 2 dB */ 7482 { 0, 0, 0, 8 }, /* 3 dB */ 7483 { 0, 0, 0, 9 }, /* 4 dB */ 7484 { 0, 0, 0, 9 }, /* 5 dB */ 7485 { 0, 0, 0, 10 }, /* 6 dB */ 7486 { 0, 0, 0, 10 }, /* 7 dB */ 7487 { 0, 0, 0, 11 }, /* 8 dB */ 7488 { 0, 0, 0, 11 }, /* 9 dB */ 7489 { 0, 0, 0, 12 }, /* 10 dB */ 7490 { 0, 0, 0, 12 }, /* 11 dB */ 7491 { 0, 0, 0, 13 }, /* 12 dB */ 7492 { 0, 0, 0, 13 }, /* 13 dB */ 7493 { 0, 0, 0, 14 }, /* 14 dB */ 7494 { 0, 0, 0, 14 }, /* 15 dB */ 7495 { 0, 0, 0, 15 }, /* 16 dB */ 7496 }; 7497 7498 static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { 7499 /* amp, pre, main, post */ 7500 { 2, 2, 15, 6 }, /* Loopback */ 7501 { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ 7502 { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ 7503 { 0, 1, 0, 11 }, /* 4 dB */ 7504 { 0, 1, 0, 13 }, /* 5 dB */ 7505 { 0, 1, 0, 15 }, /* 6 dB */ 7506 { 0, 1, 3, 15 }, /* 7 dB */ 7507 { 0, 1, 7, 15 }, /* 8 dB */ 7508 { 0, 1, 7, 15 }, /* 9 dB */ 7509 { 0, 1, 8, 15 }, /* 10 dB */ 7510 { 0, 1, 9, 15 }, /* 11 dB */ 7511 { 0, 1, 10, 15 }, /* 12 dB */ 7512 { 0, 2, 6, 15 }, /* 13 dB */ 7513 { 0, 2, 7, 15 }, /* 14 dB */ 7514 { 0, 2, 8, 15 }, /* 15 dB */ 7515 { 0, 2, 9, 15 }, /* 16 dB */ 7516 }; 7517 7518 /* 7519 * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. 7520 * These are mostly used for mez cards going through connectors 7521 * and backplane traces, but can be used to add other "unusual" 7522 * table values as well. 7523 */ 7524 static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { 7525 /* amp, pre, main, post */ 7526 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7527 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ 7528 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7529 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ 7530 { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ 7531 { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ 7532 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7533 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7534 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7535 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7536 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7537 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7538 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7539 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7540 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7541 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7542 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7543 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7544 }; 7545 7546 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { 7547 /* amp, pre, main, post */ 7548 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7549 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ 7550 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7551 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ 7552 { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ 7553 { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ 7554 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7555 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7556 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7557 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7558 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7559 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7560 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7561 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7562 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7563 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7564 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7565 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7566 }; 7567 7568 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { 7569 /* amp, pre, main, post */ 7570 { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ 7571 { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ 7572 { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ 7573 { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ 7574 { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ 7575 { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ 7576 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ 7577 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ 7578 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ 7579 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ 7580 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ 7581 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ 7582 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ 7583 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ 7584 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ 7585 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ 7586 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ 7587 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ 7588 }; 7589 7590 static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { 7591 /* amp, pre, main, post */ 7592 { 0, 0, 0, 0 }, /* QME7342 mfg settings */ 7593 { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */ 7594 }; 7595 7596 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, 7597 unsigned atten) 7598 { 7599 /* 7600 * The attenuation table starts at 2dB for entry 1, 7601 * with entry 0 being the loopback entry. 7602 */ 7603 if (atten <= 2) 7604 atten = 1; 7605 else if (atten > TXDDS_TABLE_SZ) 7606 atten = TXDDS_TABLE_SZ - 1; 7607 else 7608 atten--; 7609 return txdds + atten; 7610 } 7611 7612 /* 7613 * if override is set, the module parameter txselect has a value 7614 * for this specific port, so use it, rather than our normal mechanism. 7615 */ 7616 static void find_best_ent(struct qib_pportdata *ppd, 7617 const struct txdds_ent **sdr_dds, 7618 const struct txdds_ent **ddr_dds, 7619 const struct txdds_ent **qdr_dds, int override) 7620 { 7621 struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; 7622 int idx; 7623 7624 /* Search table of known cables */ 7625 for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { 7626 const struct vendor_txdds_ent *v = vendor_txdds + idx; 7627 7628 if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && 7629 (!v->partnum || 7630 !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { 7631 *sdr_dds = &v->sdr; 7632 *ddr_dds = &v->ddr; 7633 *qdr_dds = &v->qdr; 7634 return; 7635 } 7636 } 7637 7638 /* Active cables don't have attenuation so we only set SERDES 7639 * settings to account for the attenuation of the board traces. */ 7640 if (!override && QSFP_IS_ACTIVE(qd->tech)) { 7641 *sdr_dds = txdds_sdr + ppd->dd->board_atten; 7642 *ddr_dds = txdds_ddr + ppd->dd->board_atten; 7643 *qdr_dds = txdds_qdr + ppd->dd->board_atten; 7644 return; 7645 } 7646 7647 if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || 7648 qd->atten[1])) { 7649 *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); 7650 *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); 7651 *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); 7652 return; 7653 } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { 7654 /* 7655 * If we have no (or incomplete) data from the cable 7656 * EEPROM, or no QSFP, or override is set, use the 7657 * module parameter value to index into the attentuation 7658 * table. 7659 */ 7660 idx = ppd->cpspec->no_eep; 7661 *sdr_dds = &txdds_sdr[idx]; 7662 *ddr_dds = &txdds_ddr[idx]; 7663 *qdr_dds = &txdds_qdr[idx]; 7664 } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { 7665 /* similar to above, but index into the "extra" table. */ 7666 idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; 7667 *sdr_dds = &txdds_extra_sdr[idx]; 7668 *ddr_dds = &txdds_extra_ddr[idx]; 7669 *qdr_dds = &txdds_extra_qdr[idx]; 7670 } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) && 7671 ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + 7672 TXDDS_MFG_SZ)) { 7673 idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); 7674 pr_info("IB%u:%u use idx %u into txdds_mfg\n", 7675 ppd->dd->unit, ppd->port, idx); 7676 *sdr_dds = &txdds_extra_mfg[idx]; 7677 *ddr_dds = &txdds_extra_mfg[idx]; 7678 *qdr_dds = &txdds_extra_mfg[idx]; 7679 } else { 7680 /* this shouldn't happen, it's range checked */ 7681 *sdr_dds = txdds_sdr + qib_long_atten; 7682 *ddr_dds = txdds_ddr + qib_long_atten; 7683 *qdr_dds = txdds_qdr + qib_long_atten; 7684 } 7685 } 7686 7687 static void init_txdds_table(struct qib_pportdata *ppd, int override) 7688 { 7689 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 7690 struct txdds_ent *dds; 7691 int idx; 7692 int single_ent = 0; 7693 7694 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); 7695 7696 /* for mez cards or override, use the selected value for all entries */ 7697 if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) 7698 single_ent = 1; 7699 7700 /* Fill in the first entry with the best entry found. */ 7701 set_txdds(ppd, 0, sdr_dds); 7702 set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); 7703 set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); 7704 if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | 7705 QIBL_LINKACTIVE)) { 7706 dds = (struct txdds_ent *)(ppd->link_speed_active == 7707 QIB_IB_QDR ? qdr_dds : 7708 (ppd->link_speed_active == 7709 QIB_IB_DDR ? ddr_dds : sdr_dds)); 7710 write_tx_serdes_param(ppd, dds); 7711 } 7712 7713 /* Fill in the remaining entries with the default table values. */ 7714 for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { 7715 set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); 7716 set_txdds(ppd, idx + TXDDS_TABLE_SZ, 7717 single_ent ? ddr_dds : txdds_ddr + idx); 7718 set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, 7719 single_ent ? qdr_dds : txdds_qdr + idx); 7720 } 7721 } 7722 7723 #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) 7724 #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) 7725 #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) 7726 #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) 7727 #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) 7728 #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) 7729 #define AHB_TRANS_TRIES 10 7730 7731 /* 7732 * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, 7733 * 5=subsystem which is why most calls have "chan + chan >> 1" 7734 * for the channel argument. 7735 */ 7736 static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, 7737 u32 data, u32 mask) 7738 { 7739 u32 rd_data, wr_data, sz_mask; 7740 u64 trans, acc, prev_acc; 7741 u32 ret = 0xBAD0BAD; 7742 int tries; 7743 7744 prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); 7745 /* From this point on, make sure we return access */ 7746 acc = (quad << 1) | 1; 7747 qib_write_kreg(dd, KR_AHB_ACC, acc); 7748 7749 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7750 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7751 if (trans & AHB_TRANS_RDY) 7752 break; 7753 } 7754 if (tries >= AHB_TRANS_TRIES) { 7755 qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); 7756 goto bail; 7757 } 7758 7759 /* If mask is not all 1s, we need to read, but different SerDes 7760 * entities have different sizes 7761 */ 7762 sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; 7763 wr_data = data & mask & sz_mask; 7764 if ((~mask & sz_mask) != 0) { 7765 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7766 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7767 7768 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7769 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7770 if (trans & AHB_TRANS_RDY) 7771 break; 7772 } 7773 if (tries >= AHB_TRANS_TRIES) { 7774 qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", 7775 AHB_TRANS_TRIES); 7776 goto bail; 7777 } 7778 /* Re-read in case host split reads and read data first */ 7779 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7780 rd_data = (uint32_t)(trans >> AHB_DATA_LSB); 7781 wr_data |= (rd_data & ~mask & sz_mask); 7782 } 7783 7784 /* If mask is not zero, we need to write. */ 7785 if (mask & sz_mask) { 7786 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); 7787 trans |= ((uint64_t)wr_data << AHB_DATA_LSB); 7788 trans |= AHB_WR; 7789 qib_write_kreg(dd, KR_AHB_TRANS, trans); 7790 7791 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { 7792 trans = qib_read_kreg64(dd, KR_AHB_TRANS); 7793 if (trans & AHB_TRANS_RDY) 7794 break; 7795 } 7796 if (tries >= AHB_TRANS_TRIES) { 7797 qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", 7798 AHB_TRANS_TRIES); 7799 goto bail; 7800 } 7801 } 7802 ret = wr_data; 7803 bail: 7804 qib_write_kreg(dd, KR_AHB_ACC, prev_acc); 7805 return ret; 7806 } 7807 7808 static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, 7809 unsigned mask) 7810 { 7811 struct qib_devdata *dd = ppd->dd; 7812 int chan; 7813 7814 for (chan = 0; chan < SERDES_CHANS; ++chan) { 7815 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7816 data, mask); 7817 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 7818 0, 0); 7819 } 7820 } 7821 7822 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) 7823 { 7824 u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); 7825 u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); 7826 7827 if (enable && !state) { 7828 pr_info("IB%u:%u Turning LOS on\n", 7829 ppd->dd->unit, ppd->port); 7830 data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7831 } else if (!enable && state) { 7832 pr_info("IB%u:%u Turning LOS off\n", 7833 ppd->dd->unit, ppd->port); 7834 data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); 7835 } 7836 qib_write_kreg_port(ppd, krp_serdesctrl, data); 7837 } 7838 7839 static int serdes_7322_init(struct qib_pportdata *ppd) 7840 { 7841 int ret = 0; 7842 7843 if (ppd->dd->cspec->r1) 7844 ret = serdes_7322_init_old(ppd); 7845 else 7846 ret = serdes_7322_init_new(ppd); 7847 return ret; 7848 } 7849 7850 static int serdes_7322_init_old(struct qib_pportdata *ppd) 7851 { 7852 u32 le_val; 7853 7854 /* 7855 * Initialize the Tx DDS tables. Also done every QSFP event, 7856 * for adapters with QSFP 7857 */ 7858 init_txdds_table(ppd, 0); 7859 7860 /* ensure no tx overrides from earlier driver loads */ 7861 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7862 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7863 reset_tx_deemphasis_override)); 7864 7865 /* Patch some SerDes defaults to "Better for IB" */ 7866 /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ 7867 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 7868 7869 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 7870 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 7871 /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ 7872 ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); 7873 7874 /* May be overridden in qsfp_7322_event */ 7875 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 7876 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 7877 7878 /* enable LE1 adaptation for all but QME, which is disabled */ 7879 le_val = IS_QME(ppd->dd) ? 0 : 1; 7880 ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); 7881 7882 /* Clear cmode-override, may be set from older driver */ 7883 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7884 7885 /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ 7886 ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); 7887 7888 /* setup LoS params; these are subsystem, so chan == 5 */ 7889 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 7890 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 7891 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 7892 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 7893 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 7894 7895 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 7896 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 7897 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 7898 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 7899 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 7900 7901 /* LoS filter select enabled */ 7902 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 7903 7904 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 7905 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 7906 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 7907 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 7908 7909 serdes_7322_los_enable(ppd, 1); 7910 7911 /* rxbistena; set 0 to avoid effects of it switch later */ 7912 ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); 7913 7914 /* Configure 4 DFE taps, and only they adapt */ 7915 ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); 7916 7917 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 7918 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 7919 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 7920 7921 /* 7922 * Set receive adaptation mode. SDR and DDR adaptation are 7923 * always on, and QDR is initially enabled; later disabled. 7924 */ 7925 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 7926 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 7927 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 7928 ppd->dd->cspec->r1 ? 7929 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 7930 ppd->cpspec->qdr_dfe_on = 1; 7931 7932 /* FLoop LOS gate: PPM filter enabled */ 7933 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 7934 7935 /* rx offset center enabled */ 7936 ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); 7937 7938 if (!ppd->dd->cspec->r1) { 7939 ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); 7940 ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); 7941 } 7942 7943 /* Set the frequency loop bandwidth to 15 */ 7944 ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); 7945 7946 return 0; 7947 } 7948 7949 static int serdes_7322_init_new(struct qib_pportdata *ppd) 7950 { 7951 unsigned long tend; 7952 u32 le_val, rxcaldone; 7953 int chan, chan_done = (1 << SERDES_CHANS) - 1; 7954 7955 /* Clear cmode-override, may be set from older driver */ 7956 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); 7957 7958 /* ensure no tx overrides from earlier driver loads */ 7959 qib_write_kreg_port(ppd, krp_tx_deemph_override, 7960 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 7961 reset_tx_deemphasis_override)); 7962 7963 /* START OF LSI SUGGESTED SERDES BRINGUP */ 7964 /* Reset - Calibration Setup */ 7965 /* Stop DFE adaptaion */ 7966 ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1)); 7967 /* Disable LE1 */ 7968 ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5)); 7969 /* Disable autoadapt for LE1 */ 7970 ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15)); 7971 /* Disable LE2 */ 7972 ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6)); 7973 /* Disable VGA */ 7974 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 7975 /* Disable AFE Offset Cancel */ 7976 ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12)); 7977 /* Disable Timing Loop */ 7978 ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3)); 7979 /* Disable Frequency Loop */ 7980 ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4)); 7981 /* Disable Baseline Wander Correction */ 7982 ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13)); 7983 /* Disable RX Calibration */ 7984 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 7985 /* Disable RX Offset Calibration */ 7986 ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4)); 7987 /* Select BB CDR */ 7988 ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15)); 7989 /* CDR Step Size */ 7990 ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8)); 7991 /* Enable phase Calibration */ 7992 ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5)); 7993 /* DFE Bandwidth [2:14-12] */ 7994 ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12)); 7995 /* DFE Config (4 taps only) */ 7996 ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0)); 7997 /* Gain Loop Bandwidth */ 7998 if (!ppd->dd->cspec->r1) { 7999 ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12)); 8000 ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8)); 8001 } else { 8002 ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11)); 8003 } 8004 /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ 8005 /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ 8006 /* Data Rate Select [5:7-6] (leave as default) */ 8007 /* RX Parallel Word Width [3:10-8] (leave as default) */ 8008 8009 /* RX REST */ 8010 /* Single- or Multi-channel reset */ 8011 /* RX Analog reset */ 8012 /* RX Digital reset */ 8013 ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13)); 8014 msleep(20); 8015 /* RX Analog reset */ 8016 ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14)); 8017 msleep(20); 8018 /* RX Digital reset */ 8019 ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13)); 8020 msleep(20); 8021 8022 /* setup LoS params; these are subsystem, so chan == 5 */ 8023 /* LoS filter threshold_count on, ch 0-3, set to 8 */ 8024 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); 8025 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); 8026 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); 8027 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); 8028 8029 /* LoS filter threshold_count off, ch 0-3, set to 4 */ 8030 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); 8031 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); 8032 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); 8033 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); 8034 8035 /* LoS filter select enabled */ 8036 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); 8037 8038 /* LoS target data: SDR=4, DDR=2, QDR=1 */ 8039 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ 8040 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ 8041 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ 8042 8043 /* Turn on LOS on initial SERDES init */ 8044 serdes_7322_los_enable(ppd, 1); 8045 /* FLoop LOS gate: PPM filter enabled */ 8046 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); 8047 8048 /* RX LATCH CALIBRATION */ 8049 /* Enable Eyefinder Phase Calibration latch */ 8050 ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0)); 8051 /* Enable RX Offset Calibration latch */ 8052 ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4)); 8053 msleep(20); 8054 /* Start Calibration */ 8055 ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10)); 8056 tend = jiffies + msecs_to_jiffies(500); 8057 while (chan_done && !time_is_before_jiffies(tend)) { 8058 msleep(20); 8059 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8060 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8061 (chan + (chan >> 1)), 8062 25, 0, 0); 8063 if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 && 8064 (~chan_done & (1 << chan)) == 0) 8065 chan_done &= ~(1 << chan); 8066 } 8067 } 8068 if (chan_done) { 8069 pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n", 8070 IBSD(ppd->hw_pidx), chan_done); 8071 } else { 8072 for (chan = 0; chan < SERDES_CHANS; ++chan) { 8073 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 8074 (chan + (chan >> 1)), 8075 25, 0, 0); 8076 if ((~rxcaldone & (u32)BMASK(10, 10)) == 0) 8077 pr_info("Serdes %d chan %d calibration failed\n", 8078 IBSD(ppd->hw_pidx), chan); 8079 } 8080 } 8081 8082 /* Turn off Calibration */ 8083 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); 8084 msleep(20); 8085 8086 /* BRING RX UP */ 8087 /* Set LE2 value (May be overridden in qsfp_7322_event) */ 8088 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; 8089 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); 8090 /* Set LE2 Loop bandwidth */ 8091 ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5)); 8092 /* Enable LE2 */ 8093 ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6)); 8094 msleep(20); 8095 /* Enable H0 only */ 8096 ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1)); 8097 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ 8098 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; 8099 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); 8100 /* Enable VGA */ 8101 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); 8102 msleep(20); 8103 /* Set Frequency Loop Bandwidth */ 8104 ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5)); 8105 /* Enable Frequency Loop */ 8106 ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4)); 8107 /* Set Timing Loop Bandwidth */ 8108 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); 8109 /* Enable Timing Loop */ 8110 ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3)); 8111 msleep(50); 8112 /* Enable DFE 8113 * Set receive adaptation mode. SDR and DDR adaptation are 8114 * always on, and QDR is initially enabled; later disabled. 8115 */ 8116 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); 8117 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); 8118 qib_write_kreg_port(ppd, krp_static_adapt_dis(2), 8119 ppd->dd->cspec->r1 ? 8120 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); 8121 ppd->cpspec->qdr_dfe_on = 1; 8122 /* Disable LE1 */ 8123 ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5)); 8124 /* Disable auto adapt for LE1 */ 8125 ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15)); 8126 msleep(20); 8127 /* Enable AFE Offset Cancel */ 8128 ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12)); 8129 /* Enable Baseline Wander Correction */ 8130 ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13)); 8131 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ 8132 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); 8133 /* VGA output common mode */ 8134 ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); 8135 8136 /* 8137 * Initialize the Tx DDS tables. Also done every QSFP event, 8138 * for adapters with QSFP 8139 */ 8140 init_txdds_table(ppd, 0); 8141 8142 return 0; 8143 } 8144 8145 /* start adjust QMH serdes parameters */ 8146 8147 static void set_man_code(struct qib_pportdata *ppd, int chan, int code) 8148 { 8149 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8150 9, code << 9, 0x3f << 9); 8151 } 8152 8153 static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, 8154 int enable, u32 tapenable) 8155 { 8156 if (enable) 8157 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8158 1, 3 << 10, 0x1f << 10); 8159 else 8160 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8161 1, 0, 0x1f << 10); 8162 } 8163 8164 /* Set clock to 1, 0, 1, 0 */ 8165 static void clock_man(struct qib_pportdata *ppd, int chan) 8166 { 8167 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8168 4, 0x4000, 0x4000); 8169 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8170 4, 0, 0x4000); 8171 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8172 4, 0x4000, 0x4000); 8173 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 8174 4, 0, 0x4000); 8175 } 8176 8177 /* 8178 * write the current Tx serdes pre,post,main,amp settings into the serdes. 8179 * The caller must pass the settings appropriate for the current speed, 8180 * or not care if they are correct for the current speed. 8181 */ 8182 static void write_tx_serdes_param(struct qib_pportdata *ppd, 8183 struct txdds_ent *txdds) 8184 { 8185 u64 deemph; 8186 8187 deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); 8188 /* field names for amp, main, post, pre, respectively */ 8189 deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | 8190 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | 8191 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | 8192 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); 8193 8194 deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8195 tx_override_deemphasis_select); 8196 deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8197 txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8198 txampcntl_d2a); 8199 deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8200 txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8201 txc0_ena); 8202 deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8203 txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8204 txcp1_ena); 8205 deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8206 txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, 8207 txcn1_ena); 8208 qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); 8209 } 8210 8211 /* 8212 * Set the parameters for mez cards on link bounce, so they are 8213 * always exactly what was requested. Similar logic to init_txdds 8214 * but does just the serdes. 8215 */ 8216 static void adj_tx_serdes(struct qib_pportdata *ppd) 8217 { 8218 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; 8219 struct txdds_ent *dds; 8220 8221 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); 8222 dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? 8223 qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? 8224 ddr_dds : sdr_dds)); 8225 write_tx_serdes_param(ppd, dds); 8226 } 8227 8228 /* set QDR forced value for H1, if needed */ 8229 static void force_h1(struct qib_pportdata *ppd) 8230 { 8231 int chan; 8232 8233 ppd->cpspec->qdr_reforce = 0; 8234 if (!ppd->dd->cspec->r1) 8235 return; 8236 8237 for (chan = 0; chan < SERDES_CHANS; chan++) { 8238 set_man_mode_h1(ppd, chan, 1, 0); 8239 set_man_code(ppd, chan, ppd->cpspec->h1_val); 8240 clock_man(ppd, chan); 8241 set_man_mode_h1(ppd, chan, 0, 0); 8242 } 8243 } 8244 8245 #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) 8246 #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) 8247 8248 #define R_OPCODE_LSB 3 8249 #define R_OP_NOP 0 8250 #define R_OP_SHIFT 2 8251 #define R_OP_UPDATE 3 8252 #define R_TDI_LSB 2 8253 #define R_TDO_LSB 1 8254 #define R_RDY 1 8255 8256 static int qib_r_grab(struct qib_devdata *dd) 8257 { 8258 u64 val = SJA_EN; 8259 8260 qib_write_kreg(dd, kr_r_access, val); 8261 qib_read_kreg32(dd, kr_scratch); 8262 return 0; 8263 } 8264 8265 /* qib_r_wait_for_rdy() not only waits for the ready bit, it 8266 * returns the current state of R_TDO 8267 */ 8268 static int qib_r_wait_for_rdy(struct qib_devdata *dd) 8269 { 8270 u64 val; 8271 int timeout; 8272 8273 for (timeout = 0; timeout < 100 ; ++timeout) { 8274 val = qib_read_kreg32(dd, kr_r_access); 8275 if (val & R_RDY) 8276 return (val >> R_TDO_LSB) & 1; 8277 } 8278 return -1; 8279 } 8280 8281 static int qib_r_shift(struct qib_devdata *dd, int bisten, 8282 int len, u8 *inp, u8 *outp) 8283 { 8284 u64 valbase, val; 8285 int ret, pos; 8286 8287 valbase = SJA_EN | (bisten << BISTEN_LSB) | 8288 (R_OP_SHIFT << R_OPCODE_LSB); 8289 ret = qib_r_wait_for_rdy(dd); 8290 if (ret < 0) 8291 goto bail; 8292 for (pos = 0; pos < len; ++pos) { 8293 val = valbase; 8294 if (outp) { 8295 outp[pos >> 3] &= ~(1 << (pos & 7)); 8296 outp[pos >> 3] |= (ret << (pos & 7)); 8297 } 8298 if (inp) { 8299 int tdi = inp[pos >> 3] >> (pos & 7); 8300 8301 val |= ((tdi & 1) << R_TDI_LSB); 8302 } 8303 qib_write_kreg(dd, kr_r_access, val); 8304 qib_read_kreg32(dd, kr_scratch); 8305 ret = qib_r_wait_for_rdy(dd); 8306 if (ret < 0) 8307 break; 8308 } 8309 /* Restore to NOP between operations. */ 8310 val = SJA_EN | (bisten << BISTEN_LSB); 8311 qib_write_kreg(dd, kr_r_access, val); 8312 qib_read_kreg32(dd, kr_scratch); 8313 ret = qib_r_wait_for_rdy(dd); 8314 8315 if (ret >= 0) 8316 ret = pos; 8317 bail: 8318 return ret; 8319 } 8320 8321 static int qib_r_update(struct qib_devdata *dd, int bisten) 8322 { 8323 u64 val; 8324 int ret; 8325 8326 val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); 8327 ret = qib_r_wait_for_rdy(dd); 8328 if (ret >= 0) { 8329 qib_write_kreg(dd, kr_r_access, val); 8330 qib_read_kreg32(dd, kr_scratch); 8331 } 8332 return ret; 8333 } 8334 8335 #define BISTEN_PORT_SEL 15 8336 #define LEN_PORT_SEL 625 8337 #define BISTEN_AT 17 8338 #define LEN_AT 156 8339 #define BISTEN_ETM 16 8340 #define LEN_ETM 632 8341 8342 #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) 8343 8344 /* these are common for all IB port use cases. */ 8345 static u8 reset_at[BIT2BYTE(LEN_AT)] = { 8346 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8347 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8348 }; 8349 static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { 8350 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8351 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8352 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, 8353 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, 8354 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, 8355 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, 8356 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8357 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 8358 }; 8359 static u8 at[BIT2BYTE(LEN_AT)] = { 8360 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 8361 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 8362 }; 8363 8364 /* used for IB1 or IB2, only one in use */ 8365 static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { 8366 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8367 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8368 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8369 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, 8370 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8371 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, 8372 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, 8373 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, 8374 }; 8375 8376 /* used when both IB1 and IB2 are in use */ 8377 static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { 8378 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8379 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, 8380 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 8381 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, 8382 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 8383 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, 8384 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, 8385 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, 8386 }; 8387 8388 /* used when only IB1 is in use */ 8389 static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { 8390 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8391 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8392 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8393 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8394 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8395 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8396 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8397 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8398 }; 8399 8400 /* used when only IB2 is in use */ 8401 static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { 8402 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, 8403 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, 8404 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8405 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 8406 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, 8407 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8408 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 8409 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 8410 }; 8411 8412 /* used when both IB1 and IB2 are in use */ 8413 static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { 8414 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 8415 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 8416 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8417 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 8418 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 8419 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, 8420 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 8421 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 8422 }; 8423 8424 /* 8425 * Do setup to properly handle IB link recovery; if port is zero, we 8426 * are initializing to cover both ports; otherwise we are initializing 8427 * to cover a single port card, or the port has reached INIT and we may 8428 * need to switch coverage types. 8429 */ 8430 static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) 8431 { 8432 u8 *portsel, *etm; 8433 struct qib_devdata *dd = ppd->dd; 8434 8435 if (!ppd->dd->cspec->r1) 8436 return; 8437 if (!both) { 8438 dd->cspec->recovery_ports_initted++; 8439 ppd->cpspec->recovery_init = 1; 8440 } 8441 if (!both && dd->cspec->recovery_ports_initted == 1) { 8442 portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; 8443 etm = atetm_1port; 8444 } else { 8445 portsel = portsel_2port; 8446 etm = atetm_2port; 8447 } 8448 8449 if (qib_r_grab(dd) < 0 || 8450 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || 8451 qib_r_update(dd, BISTEN_ETM) < 0 || 8452 qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || 8453 qib_r_update(dd, BISTEN_AT) < 0 || 8454 qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, 8455 portsel, NULL) < 0 || 8456 qib_r_update(dd, BISTEN_PORT_SEL) < 0 || 8457 qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || 8458 qib_r_update(dd, BISTEN_AT) < 0 || 8459 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || 8460 qib_r_update(dd, BISTEN_ETM) < 0) 8461 qib_dev_err(dd, "Failed IB link recovery setup\n"); 8462 } 8463 8464 static void check_7322_rxe_status(struct qib_pportdata *ppd) 8465 { 8466 struct qib_devdata *dd = ppd->dd; 8467 u64 fmask; 8468 8469 if (dd->cspec->recovery_ports_initted != 1) 8470 return; /* rest doesn't apply to dualport */ 8471 qib_write_kreg(dd, kr_control, dd->control | 8472 SYM_MASK(Control, FreezeMode)); 8473 (void)qib_read_kreg64(dd, kr_scratch); 8474 udelay(3); /* ibcreset asserted 400ns, be sure that's over */ 8475 fmask = qib_read_kreg64(dd, kr_act_fmask); 8476 if (!fmask) { 8477 /* 8478 * require a powercycle before we'll work again, and make 8479 * sure we get no more interrupts, and don't turn off 8480 * freeze. 8481 */ 8482 ppd->dd->cspec->stay_in_freeze = 1; 8483 qib_7322_set_intr_state(ppd->dd, 0); 8484 qib_write_kreg(dd, kr_fmask, 0ULL); 8485 qib_dev_err(dd, "HCA unusable until powercycled\n"); 8486 return; /* eventually reset */ 8487 } 8488 8489 qib_write_kreg(ppd->dd, kr_hwerrclear, 8490 SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); 8491 8492 /* don't do the full clear_freeze(), not needed for this */ 8493 qib_write_kreg(dd, kr_control, dd->control); 8494 qib_read_kreg32(dd, kr_scratch); 8495 /* take IBC out of reset */ 8496 if (ppd->link_speed_supported) { 8497 ppd->cpspec->ibcctrl_a &= 8498 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); 8499 qib_write_kreg_port(ppd, krp_ibcctrl_a, 8500 ppd->cpspec->ibcctrl_a); 8501 qib_read_kreg32(dd, kr_scratch); 8502 if (ppd->lflags & QIBL_IB_LINK_DISABLED) 8503 qib_set_ib_7322_lstate(ppd, 0, 8504 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); 8505 } 8506 } 8507