1 /* 2 * Copyright (C) 2014 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/bitops.h> 15 #include <linux/clk.h> 16 #include <linux/gfp.h> 17 #include <linux/io.h> 18 #include <linux/input.h> 19 #include <linux/input/matrix_keypad.h> 20 #include <linux/interrupt.h> 21 #include <linux/module.h> 22 #include <linux/of.h> 23 #include <linux/platform_device.h> 24 #include <linux/stddef.h> 25 #include <linux/types.h> 26 27 #define DEFAULT_CLK_HZ 31250 28 #define MAX_ROWS 8 29 #define MAX_COLS 8 30 31 /* Register/field definitions */ 32 #define KPCR_OFFSET 0x00000080 33 #define KPCR_MODE 0x00000002 34 #define KPCR_MODE_SHIFT 1 35 #define KPCR_MODE_MASK 1 36 #define KPCR_ENABLE 0x00000001 37 #define KPCR_STATUSFILTERENABLE 0x00008000 38 #define KPCR_STATUSFILTERTYPE_SHIFT 12 39 #define KPCR_COLFILTERENABLE 0x00000800 40 #define KPCR_COLFILTERTYPE_SHIFT 8 41 #define KPCR_ROWWIDTH_SHIFT 20 42 #define KPCR_COLUMNWIDTH_SHIFT 16 43 44 #define KPIOR_OFFSET 0x00000084 45 #define KPIOR_ROWOCONTRL_SHIFT 24 46 #define KPIOR_ROWOCONTRL_MASK 0xFF000000 47 #define KPIOR_COLUMNOCONTRL_SHIFT 16 48 #define KPIOR_COLUMNOCONTRL_MASK 0x00FF0000 49 #define KPIOR_COLUMN_IO_DATA_SHIFT 0 50 51 #define KPEMR0_OFFSET 0x00000090 52 #define KPEMR1_OFFSET 0x00000094 53 #define KPEMR2_OFFSET 0x00000098 54 #define KPEMR3_OFFSET 0x0000009C 55 #define KPEMR_EDGETYPE_BOTH 3 56 57 #define KPSSR0_OFFSET 0x000000A0 58 #define KPSSR1_OFFSET 0x000000A4 59 #define KPSSRN_OFFSET(reg_n) (KPSSR0_OFFSET + 4 * (reg_n)) 60 #define KPIMR0_OFFSET 0x000000B0 61 #define KPIMR1_OFFSET 0x000000B4 62 #define KPICR0_OFFSET 0x000000B8 63 #define KPICR1_OFFSET 0x000000BC 64 #define KPICRN_OFFSET(reg_n) (KPICR0_OFFSET + 4 * (reg_n)) 65 #define KPISR0_OFFSET 0x000000C0 66 #define KPISR1_OFFSET 0x000000C4 67 68 #define KPCR_STATUSFILTERTYPE_MAX 7 69 #define KPCR_COLFILTERTYPE_MAX 7 70 71 /* Macros to determine the row/column from a bit that is set in SSR0/1. */ 72 #define BIT_TO_ROW_SSRN(bit_nr, reg_n) (((bit_nr) >> 3) + 4 * (reg_n)) 73 #define BIT_TO_COL(bit_nr) ((bit_nr) % 8) 74 75 /* Structure representing various run-time entities */ 76 struct bcm_kp { 77 void __iomem *base; 78 int irq; 79 struct clk *clk; 80 struct input_dev *input_dev; 81 unsigned long last_state[2]; 82 unsigned int n_rows; 83 unsigned int n_cols; 84 u32 kpcr; 85 u32 kpior; 86 u32 kpemr; 87 u32 imr0_val; 88 u32 imr1_val; 89 }; 90 91 /* 92 * Returns the keycode from the input device keymap given the row and 93 * column. 94 */ 95 static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col) 96 { 97 unsigned int row_shift = get_count_order(kp->n_cols); 98 unsigned short *keymap = kp->input_dev->keycode; 99 100 return keymap[MATRIX_SCAN_CODE(row, col, row_shift)]; 101 } 102 103 static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode) 104 { 105 unsigned long state, change; 106 int bit_nr; 107 int key_press; 108 int row, col; 109 unsigned int keycode; 110 111 /* Clear interrupts */ 112 writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num)); 113 114 state = readl(kp->base + KPSSRN_OFFSET(reg_num)); 115 change = kp->last_state[reg_num] ^ state; 116 kp->last_state[reg_num] = state; 117 118 for_each_set_bit(bit_nr, &change, BITS_PER_LONG) { 119 key_press = state & BIT(bit_nr); 120 /* The meaning of SSR register depends on pull mode. */ 121 key_press = pull_mode ? !key_press : key_press; 122 row = BIT_TO_ROW_SSRN(bit_nr, reg_num); 123 col = BIT_TO_COL(bit_nr); 124 keycode = bcm_kp_get_keycode(kp, row, col); 125 input_report_key(kp->input_dev, keycode, key_press); 126 } 127 } 128 129 static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id) 130 { 131 struct bcm_kp *kp = dev_id; 132 int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK; 133 int reg_num; 134 135 for (reg_num = 0; reg_num <= 1; reg_num++) 136 bcm_kp_report_keys(kp, reg_num, pull_mode); 137 138 input_sync(kp->input_dev); 139 140 return IRQ_HANDLED; 141 } 142 143 static int bcm_kp_start(struct bcm_kp *kp) 144 { 145 int error; 146 147 if (kp->clk) { 148 error = clk_prepare_enable(kp->clk); 149 if (error) 150 return error; 151 } 152 153 writel(kp->kpior, kp->base + KPIOR_OFFSET); 154 155 writel(kp->imr0_val, kp->base + KPIMR0_OFFSET); 156 writel(kp->imr1_val, kp->base + KPIMR1_OFFSET); 157 158 writel(kp->kpemr, kp->base + KPEMR0_OFFSET); 159 writel(kp->kpemr, kp->base + KPEMR1_OFFSET); 160 writel(kp->kpemr, kp->base + KPEMR2_OFFSET); 161 writel(kp->kpemr, kp->base + KPEMR3_OFFSET); 162 163 writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET); 164 writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET); 165 166 kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET); 167 kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET); 168 169 writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET); 170 171 return 0; 172 } 173 174 static void bcm_kp_stop(const struct bcm_kp *kp) 175 { 176 u32 val; 177 178 val = readl(kp->base + KPCR_OFFSET); 179 val &= ~KPCR_ENABLE; 180 writel(0, kp->base + KPCR_OFFSET); 181 writel(0, kp->base + KPIMR0_OFFSET); 182 writel(0, kp->base + KPIMR1_OFFSET); 183 writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET); 184 writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET); 185 186 if (kp->clk) 187 clk_disable_unprepare(kp->clk); 188 } 189 190 static int bcm_kp_open(struct input_dev *dev) 191 { 192 struct bcm_kp *kp = input_get_drvdata(dev); 193 194 return bcm_kp_start(kp); 195 } 196 197 static void bcm_kp_close(struct input_dev *dev) 198 { 199 struct bcm_kp *kp = input_get_drvdata(dev); 200 201 bcm_kp_stop(kp); 202 } 203 204 static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp) 205 { 206 struct device *dev = kp->input_dev->dev.parent; 207 struct device_node *np = dev->of_node; 208 int error; 209 unsigned int dt_val; 210 unsigned int i; 211 unsigned int num_rows, col_mask, rows_set; 212 213 /* Initialize the KPCR Keypad Configuration Register */ 214 kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE; 215 216 error = matrix_keypad_parse_properties(dev, &kp->n_rows, &kp->n_cols); 217 if (error) { 218 dev_err(dev, "failed to parse kp params\n"); 219 return error; 220 } 221 222 /* Set row width for the ASIC block. */ 223 kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT; 224 225 /* Set column width for the ASIC block. */ 226 kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT; 227 228 /* Configure the IMR registers */ 229 230 /* 231 * IMR registers contain interrupt enable bits for 8x8 matrix 232 * IMR0 register format: <row3> <row2> <row1> <row0> 233 * IMR1 register format: <row7> <row6> <row5> <row4> 234 */ 235 col_mask = (1 << (kp->n_cols)) - 1; 236 num_rows = kp->n_rows; 237 238 /* Set column bits in rows 0 to 3 in IMR0 */ 239 kp->imr0_val = col_mask; 240 241 rows_set = 1; 242 while (--num_rows && rows_set++ < 4) 243 kp->imr0_val |= kp->imr0_val << MAX_COLS; 244 245 /* Set column bits in rows 4 to 7 in IMR1 */ 246 kp->imr1_val = 0; 247 if (num_rows) { 248 kp->imr1_val = col_mask; 249 while (--num_rows) 250 kp->imr1_val |= kp->imr1_val << MAX_COLS; 251 } 252 253 /* Initialize the KPEMR Keypress Edge Mode Registers */ 254 /* Trigger on both edges */ 255 kp->kpemr = 0; 256 for (i = 0; i <= 30; i += 2) 257 kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i); 258 259 /* 260 * Obtain the Status filter debounce value and verify against the 261 * possible values specified in the DT binding. 262 */ 263 of_property_read_u32(np, "status-debounce-filter-period", &dt_val); 264 265 if (dt_val > KPCR_STATUSFILTERTYPE_MAX) { 266 dev_err(dev, "Invalid Status filter debounce value %d\n", 267 dt_val); 268 return -EINVAL; 269 } 270 271 kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT; 272 273 /* 274 * Obtain the Column filter debounce value and verify against the 275 * possible values specified in the DT binding. 276 */ 277 of_property_read_u32(np, "col-debounce-filter-period", &dt_val); 278 279 if (dt_val > KPCR_COLFILTERTYPE_MAX) { 280 dev_err(dev, "Invalid Column filter debounce value %d\n", 281 dt_val); 282 return -EINVAL; 283 } 284 285 kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT; 286 287 /* 288 * Determine between the row and column, 289 * which should be configured as output. 290 */ 291 if (of_property_read_bool(np, "row-output-enabled")) { 292 /* 293 * Set RowOContrl or ColumnOContrl in KPIOR 294 * to the number of pins to drive as outputs 295 */ 296 kp->kpior = ((1 << kp->n_rows) - 1) << 297 KPIOR_ROWOCONTRL_SHIFT; 298 } else { 299 kp->kpior = ((1 << kp->n_cols) - 1) << 300 KPIOR_COLUMNOCONTRL_SHIFT; 301 } 302 303 /* 304 * Determine if the scan pull up needs to be enabled 305 */ 306 if (of_property_read_bool(np, "pull-up-enabled")) 307 kp->kpcr |= KPCR_MODE; 308 309 dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n", 310 kp->n_rows, kp->n_cols, 311 kp->kpcr, kp->kpior, kp->kpemr); 312 313 return 0; 314 } 315 316 317 static int bcm_kp_probe(struct platform_device *pdev) 318 { 319 struct bcm_kp *kp; 320 struct input_dev *input_dev; 321 struct resource *res; 322 int error; 323 324 kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); 325 if (!kp) 326 return -ENOMEM; 327 328 input_dev = devm_input_allocate_device(&pdev->dev); 329 if (!input_dev) { 330 dev_err(&pdev->dev, "failed to allocate the input device\n"); 331 return -ENOMEM; 332 } 333 334 __set_bit(EV_KEY, input_dev->evbit); 335 336 /* Enable auto repeat feature of Linux input subsystem */ 337 if (of_property_read_bool(pdev->dev.of_node, "autorepeat")) 338 __set_bit(EV_REP, input_dev->evbit); 339 340 input_dev->name = pdev->name; 341 input_dev->phys = "keypad/input0"; 342 input_dev->dev.parent = &pdev->dev; 343 input_dev->open = bcm_kp_open; 344 input_dev->close = bcm_kp_close; 345 346 input_dev->id.bustype = BUS_HOST; 347 input_dev->id.vendor = 0x0001; 348 input_dev->id.product = 0x0001; 349 input_dev->id.version = 0x0100; 350 351 input_set_drvdata(input_dev, kp); 352 353 kp->input_dev = input_dev; 354 355 error = bcm_kp_matrix_key_parse_dt(kp); 356 if (error) 357 return error; 358 359 error = matrix_keypad_build_keymap(NULL, NULL, 360 kp->n_rows, kp->n_cols, 361 NULL, input_dev); 362 if (error) { 363 dev_err(&pdev->dev, "failed to build keymap\n"); 364 return error; 365 } 366 367 /* Get the KEYPAD base address */ 368 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 369 if (!res) { 370 dev_err(&pdev->dev, "Missing keypad base address resource\n"); 371 return -ENODEV; 372 } 373 374 kp->base = devm_ioremap_resource(&pdev->dev, res); 375 if (IS_ERR(kp->base)) 376 return PTR_ERR(kp->base); 377 378 /* Enable clock */ 379 kp->clk = devm_clk_get(&pdev->dev, "peri_clk"); 380 if (IS_ERR(kp->clk)) { 381 error = PTR_ERR(kp->clk); 382 if (error != -ENOENT) { 383 if (error != -EPROBE_DEFER) 384 dev_err(&pdev->dev, "Failed to get clock\n"); 385 return error; 386 } 387 dev_dbg(&pdev->dev, 388 "No clock specified. Assuming it's enabled\n"); 389 kp->clk = NULL; 390 } else { 391 unsigned int desired_rate; 392 long actual_rate; 393 394 error = of_property_read_u32(pdev->dev.of_node, 395 "clock-frequency", &desired_rate); 396 if (error < 0) 397 desired_rate = DEFAULT_CLK_HZ; 398 399 actual_rate = clk_round_rate(kp->clk, desired_rate); 400 if (actual_rate <= 0) 401 return -EINVAL; 402 403 error = clk_set_rate(kp->clk, actual_rate); 404 if (error) 405 return error; 406 407 error = clk_prepare_enable(kp->clk); 408 if (error) 409 return error; 410 } 411 412 /* Put the kp into a known sane state */ 413 bcm_kp_stop(kp); 414 415 kp->irq = platform_get_irq(pdev, 0); 416 if (kp->irq < 0) { 417 dev_err(&pdev->dev, "no IRQ specified\n"); 418 return -EINVAL; 419 } 420 421 error = devm_request_threaded_irq(&pdev->dev, kp->irq, 422 NULL, bcm_kp_isr_thread, 423 IRQF_ONESHOT, pdev->name, kp); 424 if (error) { 425 dev_err(&pdev->dev, "failed to request IRQ\n"); 426 return error; 427 } 428 429 error = input_register_device(input_dev); 430 if (error) { 431 dev_err(&pdev->dev, "failed to register input device\n"); 432 return error; 433 } 434 435 return 0; 436 } 437 438 static const struct of_device_id bcm_kp_of_match[] = { 439 { .compatible = "brcm,bcm-keypad" }, 440 { }, 441 }; 442 MODULE_DEVICE_TABLE(of, bcm_kp_of_match); 443 444 static struct platform_driver bcm_kp_device_driver = { 445 .probe = bcm_kp_probe, 446 .driver = { 447 .name = "bcm-keypad", 448 .of_match_table = of_match_ptr(bcm_kp_of_match), 449 } 450 }; 451 452 module_platform_driver(bcm_kp_device_driver); 453 454 MODULE_AUTHOR("Broadcom Corporation"); 455 MODULE_DESCRIPTION("BCM Keypad Driver"); 456 MODULE_LICENSE("GPL v2"); 457