xref: /linux/drivers/irqchip/irq-gic-realview.c (revision 44f57d78)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Special GIC quirks for the ARM RealView
4  * Copyright (C) 2015 Linus Walleij
5  */
6 #include <linux/of.h>
7 #include <linux/regmap.h>
8 #include <linux/mfd/syscon.h>
9 #include <linux/bitops.h>
10 #include <linux/irqchip.h>
11 #include <linux/irqchip/arm-gic.h>
12 
13 #define REALVIEW_SYS_LOCK_OFFSET	0x20
14 #define REALVIEW_SYS_PLD_CTRL1		0x74
15 #define REALVIEW_EB_REVB_SYS_PLD_CTRL1	0xD8
16 #define VERSATILE_LOCK_VAL		0xA05F
17 #define PLD_INTMODE_MASK		BIT(22)|BIT(23)|BIT(24)
18 #define PLD_INTMODE_LEGACY		0x0
19 #define PLD_INTMODE_NEW_DCC		BIT(22)
20 #define PLD_INTMODE_NEW_NO_DCC		BIT(23)
21 #define PLD_INTMODE_FIQ_ENABLE		BIT(24)
22 
23 /* For some reason RealView EB Rev B moved this register */
24 static const struct of_device_id syscon_pldset_of_match[] = {
25 	{
26 		.compatible = "arm,realview-eb11mp-revb-syscon",
27 		.data = (void *)REALVIEW_EB_REVB_SYS_PLD_CTRL1,
28 	},
29 	{
30 		.compatible = "arm,realview-eb11mp-revc-syscon",
31 		.data = (void *)REALVIEW_SYS_PLD_CTRL1,
32 	},
33 	{
34 		.compatible = "arm,realview-eb-syscon",
35 		.data = (void *)REALVIEW_SYS_PLD_CTRL1,
36 	},
37 	{
38 		.compatible = "arm,realview-pb11mp-syscon",
39 		.data = (void *)REALVIEW_SYS_PLD_CTRL1,
40 	},
41 	{},
42 };
43 
44 static int __init
45 realview_gic_of_init(struct device_node *node, struct device_node *parent)
46 {
47 	struct regmap *map;
48 	struct device_node *np;
49 	const struct of_device_id *gic_id;
50 	u32 pld1_ctrl;
51 
52 	np = of_find_matching_node_and_match(NULL, syscon_pldset_of_match,
53 					     &gic_id);
54 	if (!np)
55 		return -ENODEV;
56 	pld1_ctrl = (u32)gic_id->data;
57 
58 	/* The PB11MPCore GIC needs to be configured in the syscon */
59 	map = syscon_node_to_regmap(np);
60 	if (!IS_ERR(map)) {
61 		/* new irq mode with no DCC */
62 		regmap_write(map, REALVIEW_SYS_LOCK_OFFSET,
63 			     VERSATILE_LOCK_VAL);
64 		regmap_update_bits(map, pld1_ctrl,
65 				   PLD_INTMODE_NEW_NO_DCC,
66 				   PLD_INTMODE_MASK);
67 		regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, 0x0000);
68 		pr_info("RealView GIC: set up interrupt controller to NEW mode, no DCC\n");
69 	} else {
70 		pr_err("RealView GIC setup: could not find syscon\n");
71 		return -ENODEV;
72 	}
73 	return gic_of_init(node, parent);
74 }
75 IRQCHIP_DECLARE(armtc11mp_gic, "arm,tc11mp-gic", realview_gic_of_init);
76 IRQCHIP_DECLARE(armeb11mp_gic, "arm,eb11mp-gic", realview_gic_of_init);
77