xref: /linux/drivers/leds/leds-is31fl319x.c (revision 2da68a77)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright 2015-16 Golden Delicious Computers
4  *
5  * Author: Nikolaus Schaller <hns@goldelico.com>
6  *
7  * LED driver for the IS31FL319{0,1,3,6,9} to drive 1, 3, 6 or 9 light
8  * effect LEDs.
9  */
10 
11 #include <linux/err.h>
12 #include <linux/i2c.h>
13 #include <linux/leds.h>
14 #include <linux/mod_devicetable.h>
15 #include <linux/module.h>
16 #include <linux/property.h>
17 #include <linux/regmap.h>
18 #include <linux/slab.h>
19 #include <linux/delay.h>
20 #include <linux/gpio/consumer.h>
21 
22 /* register numbers */
23 #define IS31FL319X_SHUTDOWN		0x00
24 
25 /* registers for 3190, 3191 and 3193 */
26 #define IS31FL3190_BREATHING		0x01
27 #define IS31FL3190_LEDMODE		0x02
28 #define IS31FL3190_CURRENT		0x03
29 #define IS31FL3190_PWM(channel)		(0x04 + channel)
30 #define IS31FL3190_DATA_UPDATE		0x07
31 #define IS31FL3190_T0(channel)		(0x0a + channel)
32 #define IS31FL3190_T1T2(channel)	(0x10 + channel)
33 #define IS31FL3190_T3T4(channel)	(0x16 + channel)
34 #define IS31FL3190_TIME_UPDATE		0x1c
35 #define IS31FL3190_LEDCONTROL		0x1d
36 #define IS31FL3190_RESET		0x2f
37 
38 #define IS31FL3190_CURRENT_uA_MIN	5000
39 #define IS31FL3190_CURRENT_uA_DEFAULT	42000
40 #define IS31FL3190_CURRENT_uA_MAX	42000
41 #define IS31FL3190_CURRENT_MASK		GENMASK(4, 2)
42 #define IS31FL3190_CURRENT_5_mA		0x02
43 #define IS31FL3190_CURRENT_10_mA	0x01
44 #define IS31FL3190_CURRENT_17dot5_mA	0x04
45 #define IS31FL3190_CURRENT_30_mA	0x03
46 #define IS31FL3190_CURRENT_42_mA	0x00
47 
48 /* registers for 3196 and 3199 */
49 #define IS31FL3196_CTRL1		0x01
50 #define IS31FL3196_CTRL2		0x02
51 #define IS31FL3196_CONFIG1		0x03
52 #define IS31FL3196_CONFIG2		0x04
53 #define IS31FL3196_RAMP_MODE		0x05
54 #define IS31FL3196_BREATH_MARK		0x06
55 #define IS31FL3196_PWM(channel)		(0x07 + channel)
56 #define IS31FL3196_DATA_UPDATE		0x10
57 #define IS31FL3196_T0(channel)		(0x11 + channel)
58 #define IS31FL3196_T123_1		0x1a
59 #define IS31FL3196_T123_2		0x1b
60 #define IS31FL3196_T123_3		0x1c
61 #define IS31FL3196_T4(channel)		(0x1d + channel)
62 #define IS31FL3196_TIME_UPDATE		0x26
63 #define IS31FL3196_RESET		0xff
64 
65 #define IS31FL3196_REG_CNT		(IS31FL3196_RESET + 1)
66 
67 #define IS31FL319X_MAX_LEDS		9
68 
69 /* CS (Current Setting) in CONFIG2 register */
70 #define IS31FL3196_CONFIG2_CS_SHIFT	4
71 #define IS31FL3196_CONFIG2_CS_MASK	GENMASK(2, 0)
72 #define IS31FL3196_CONFIG2_CS_STEP_REF	12
73 
74 #define IS31FL3196_CURRENT_uA_MIN	5000
75 #define IS31FL3196_CURRENT_uA_MAX	40000
76 #define IS31FL3196_CURRENT_uA_STEP	5000
77 #define IS31FL3196_CURRENT_uA_DEFAULT	20000
78 
79 /* Audio gain in CONFIG2 register */
80 #define IS31FL3196_AUDIO_GAIN_DB_MAX	((u32)21)
81 #define IS31FL3196_AUDIO_GAIN_DB_STEP	3
82 
83 /*
84  * regmap is used as a cache of chip's register space,
85  * to avoid reading back brightness values from chip,
86  * which is known to hang.
87  */
88 struct is31fl319x_chip {
89 	const struct is31fl319x_chipdef *cdef;
90 	struct i2c_client               *client;
91 	struct gpio_desc		*shutdown_gpio;
92 	struct regmap                   *regmap;
93 	struct mutex                    lock;
94 	u32                             audio_gain_db;
95 
96 	struct is31fl319x_led {
97 		struct is31fl319x_chip  *chip;
98 		struct led_classdev     cdev;
99 		u32                     max_microamp;
100 		bool                    configured;
101 	} leds[IS31FL319X_MAX_LEDS];
102 };
103 
104 struct is31fl319x_chipdef {
105 	int num_leds;
106 	u8 reset_reg;
107 	const struct regmap_config *is31fl319x_regmap_config;
108 	int (*brightness_set)(struct led_classdev *cdev, enum led_brightness brightness);
109 	u32 current_default;
110 	u32 current_min;
111 	u32 current_max;
112 	bool is_3196or3199;
113 };
114 
115 static bool is31fl319x_readable_reg(struct device *dev, unsigned int reg)
116 {
117 	/* we have no readable registers */
118 	return false;
119 }
120 
121 static bool is31fl3190_volatile_reg(struct device *dev, unsigned int reg)
122 {
123 	/* volatile registers are not cached */
124 	switch (reg) {
125 	case IS31FL3190_DATA_UPDATE:
126 	case IS31FL3190_TIME_UPDATE:
127 	case IS31FL3190_RESET:
128 		return true; /* always write-through */
129 	default:
130 		return false;
131 	}
132 }
133 
134 static const struct reg_default is31fl3190_reg_defaults[] = {
135 	{ IS31FL3190_LEDMODE, 0x00 },
136 	{ IS31FL3190_CURRENT, 0x00 },
137 	{ IS31FL3190_PWM(0), 0x00 },
138 	{ IS31FL3190_PWM(1), 0x00 },
139 	{ IS31FL3190_PWM(2), 0x00 },
140 };
141 
142 static struct regmap_config is31fl3190_regmap_config = {
143 	.reg_bits = 8,
144 	.val_bits = 8,
145 	.max_register = IS31FL3190_RESET,
146 	.cache_type = REGCACHE_FLAT,
147 	.readable_reg = is31fl319x_readable_reg,
148 	.volatile_reg = is31fl3190_volatile_reg,
149 	.reg_defaults = is31fl3190_reg_defaults,
150 	.num_reg_defaults = ARRAY_SIZE(is31fl3190_reg_defaults),
151 };
152 
153 static bool is31fl3196_volatile_reg(struct device *dev, unsigned int reg)
154 {
155 	/* volatile registers are not cached */
156 	switch (reg) {
157 	case IS31FL3196_DATA_UPDATE:
158 	case IS31FL3196_TIME_UPDATE:
159 	case IS31FL3196_RESET:
160 		return true; /* always write-through */
161 	default:
162 		return false;
163 	}
164 }
165 
166 static const struct reg_default is31fl3196_reg_defaults[] = {
167 	{ IS31FL3196_CONFIG1, 0x00 },
168 	{ IS31FL3196_CONFIG2, 0x00 },
169 	{ IS31FL3196_PWM(0), 0x00 },
170 	{ IS31FL3196_PWM(1), 0x00 },
171 	{ IS31FL3196_PWM(2), 0x00 },
172 	{ IS31FL3196_PWM(3), 0x00 },
173 	{ IS31FL3196_PWM(4), 0x00 },
174 	{ IS31FL3196_PWM(5), 0x00 },
175 	{ IS31FL3196_PWM(6), 0x00 },
176 	{ IS31FL3196_PWM(7), 0x00 },
177 	{ IS31FL3196_PWM(8), 0x00 },
178 };
179 
180 static struct regmap_config is31fl3196_regmap_config = {
181 	.reg_bits = 8,
182 	.val_bits = 8,
183 	.max_register = IS31FL3196_REG_CNT,
184 	.cache_type = REGCACHE_FLAT,
185 	.readable_reg = is31fl319x_readable_reg,
186 	.volatile_reg = is31fl3196_volatile_reg,
187 	.reg_defaults = is31fl3196_reg_defaults,
188 	.num_reg_defaults = ARRAY_SIZE(is31fl3196_reg_defaults),
189 };
190 
191 static int is31fl3190_brightness_set(struct led_classdev *cdev,
192 				     enum led_brightness brightness)
193 {
194 	struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led, cdev);
195 	struct is31fl319x_chip *is31 = led->chip;
196 	int chan = led - is31->leds;
197 	int ret;
198 	int i;
199 	u8 ctrl = 0;
200 
201 	dev_dbg(&is31->client->dev, "channel %d: %d\n", chan, brightness);
202 
203 	mutex_lock(&is31->lock);
204 
205 	/* update PWM register */
206 	ret = regmap_write(is31->regmap, IS31FL3190_PWM(chan), brightness);
207 	if (ret < 0)
208 		goto out;
209 
210 	/* read current brightness of all PWM channels */
211 	for (i = 0; i < is31->cdef->num_leds; i++) {
212 		unsigned int pwm_value;
213 		bool on;
214 
215 		/*
216 		 * since neither cdev nor the chip can provide
217 		 * the current setting, we read from the regmap cache
218 		 */
219 
220 		ret = regmap_read(is31->regmap, IS31FL3190_PWM(i), &pwm_value);
221 		on = ret >= 0 && pwm_value > LED_OFF;
222 
223 		ctrl |= on << i;
224 	}
225 
226 	if (ctrl > 0) {
227 		dev_dbg(&is31->client->dev, "power up %02x\n", ctrl);
228 		regmap_write(is31->regmap, IS31FL3190_LEDCONTROL, ctrl);
229 		/* update PWMs */
230 		regmap_write(is31->regmap, IS31FL3190_DATA_UPDATE, 0x00);
231 		/* enable chip from shut down and enable all channels */
232 		ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x20);
233 	} else {
234 		dev_dbg(&is31->client->dev, "power down\n");
235 		/* shut down (no need to clear LEDCONTROL) */
236 		ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x01);
237 	}
238 
239 out:
240 	mutex_unlock(&is31->lock);
241 
242 	return ret;
243 }
244 
245 static int is31fl3196_brightness_set(struct led_classdev *cdev,
246 				     enum led_brightness brightness)
247 {
248 	struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led, cdev);
249 	struct is31fl319x_chip *is31 = led->chip;
250 	int chan = led - is31->leds;
251 	int ret;
252 	int i;
253 	u8 ctrl1 = 0, ctrl2 = 0;
254 
255 	dev_dbg(&is31->client->dev, "channel %d: %d\n", chan, brightness);
256 
257 	mutex_lock(&is31->lock);
258 
259 	/* update PWM register */
260 	ret = regmap_write(is31->regmap, IS31FL3196_PWM(chan), brightness);
261 	if (ret < 0)
262 		goto out;
263 
264 	/* read current brightness of all PWM channels */
265 	for (i = 0; i < is31->cdef->num_leds; i++) {
266 		unsigned int pwm_value;
267 		bool on;
268 
269 		/*
270 		 * since neither cdev nor the chip can provide
271 		 * the current setting, we read from the regmap cache
272 		 */
273 
274 		ret = regmap_read(is31->regmap, IS31FL3196_PWM(i), &pwm_value);
275 		on = ret >= 0 && pwm_value > LED_OFF;
276 
277 		if (i < 3)
278 			ctrl1 |= on << i;       /* 0..2 => bit 0..2 */
279 		else if (i < 6)
280 			ctrl1 |= on << (i + 1); /* 3..5 => bit 4..6 */
281 		else
282 			ctrl2 |= on << (i - 6); /* 6..8 => bit 0..2 */
283 	}
284 
285 	if (ctrl1 > 0 || ctrl2 > 0) {
286 		dev_dbg(&is31->client->dev, "power up %02x %02x\n",
287 			ctrl1, ctrl2);
288 		regmap_write(is31->regmap, IS31FL3196_CTRL1, ctrl1);
289 		regmap_write(is31->regmap, IS31FL3196_CTRL2, ctrl2);
290 		/* update PWMs */
291 		regmap_write(is31->regmap, IS31FL3196_DATA_UPDATE, 0x00);
292 		/* enable chip from shut down */
293 		ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x01);
294 	} else {
295 		dev_dbg(&is31->client->dev, "power down\n");
296 		/* shut down (no need to clear CTRL1/2) */
297 		ret = regmap_write(is31->regmap, IS31FL319X_SHUTDOWN, 0x00);
298 	}
299 
300 out:
301 	mutex_unlock(&is31->lock);
302 
303 	return ret;
304 }
305 
306 static const struct is31fl319x_chipdef is31fl3190_cdef = {
307 	.num_leds = 1,
308 	.reset_reg = IS31FL3190_RESET,
309 	.is31fl319x_regmap_config = &is31fl3190_regmap_config,
310 	.brightness_set = is31fl3190_brightness_set,
311 	.current_default = IS31FL3190_CURRENT_uA_DEFAULT,
312 	.current_min = IS31FL3190_CURRENT_uA_MIN,
313 	.current_max = IS31FL3190_CURRENT_uA_MAX,
314 	.is_3196or3199 = false,
315 };
316 
317 static const struct is31fl319x_chipdef is31fl3193_cdef = {
318 	.num_leds = 3,
319 	.reset_reg = IS31FL3190_RESET,
320 	.is31fl319x_regmap_config = &is31fl3190_regmap_config,
321 	.brightness_set = is31fl3190_brightness_set,
322 	.current_default = IS31FL3190_CURRENT_uA_DEFAULT,
323 	.current_min = IS31FL3190_CURRENT_uA_MIN,
324 	.current_max = IS31FL3190_CURRENT_uA_MAX,
325 	.is_3196or3199 = false,
326 };
327 
328 static const struct is31fl319x_chipdef is31fl3196_cdef = {
329 	.num_leds = 6,
330 	.reset_reg = IS31FL3196_RESET,
331 	.is31fl319x_regmap_config = &is31fl3196_regmap_config,
332 	.brightness_set = is31fl3196_brightness_set,
333 	.current_default = IS31FL3196_CURRENT_uA_DEFAULT,
334 	.current_min = IS31FL3196_CURRENT_uA_MIN,
335 	.current_max = IS31FL3196_CURRENT_uA_MAX,
336 	.is_3196or3199 = true,
337 };
338 
339 static const struct is31fl319x_chipdef is31fl3199_cdef = {
340 	.num_leds = 9,
341 	.reset_reg = IS31FL3196_RESET,
342 	.is31fl319x_regmap_config = &is31fl3196_regmap_config,
343 	.brightness_set = is31fl3196_brightness_set,
344 	.current_default = IS31FL3196_CURRENT_uA_DEFAULT,
345 	.current_min = IS31FL3196_CURRENT_uA_MIN,
346 	.current_max = IS31FL3196_CURRENT_uA_MAX,
347 	.is_3196or3199 = true,
348 };
349 
350 static const struct of_device_id of_is31fl319x_match[] = {
351 	{ .compatible = "issi,is31fl3190", .data = &is31fl3190_cdef, },
352 	{ .compatible = "issi,is31fl3191", .data = &is31fl3190_cdef, },
353 	{ .compatible = "issi,is31fl3193", .data = &is31fl3193_cdef, },
354 	{ .compatible = "issi,is31fl3196", .data = &is31fl3196_cdef, },
355 	{ .compatible = "issi,is31fl3199", .data = &is31fl3199_cdef, },
356 	{ .compatible = "si-en,sn3190",    .data = &is31fl3190_cdef, },
357 	{ .compatible = "si-en,sn3191",    .data = &is31fl3190_cdef, },
358 	{ .compatible = "si-en,sn3193",    .data = &is31fl3193_cdef, },
359 	{ .compatible = "si-en,sn3196",    .data = &is31fl3196_cdef, },
360 	{ .compatible = "si-en,sn3199",    .data = &is31fl3199_cdef, },
361 	{ }
362 };
363 MODULE_DEVICE_TABLE(of, of_is31fl319x_match);
364 
365 static int is31fl319x_parse_child_fw(const struct device *dev,
366 				     const struct fwnode_handle *child,
367 				     struct is31fl319x_led *led,
368 				     struct is31fl319x_chip *is31)
369 {
370 	struct led_classdev *cdev = &led->cdev;
371 	int ret;
372 
373 	if (fwnode_property_read_string(child, "label", &cdev->name))
374 		cdev->name = fwnode_get_name(child);
375 
376 	ret = fwnode_property_read_string(child, "linux,default-trigger", &cdev->default_trigger);
377 	if (ret < 0 && ret != -EINVAL) /* is optional */
378 		return ret;
379 
380 	led->max_microamp = is31->cdef->current_default;
381 	ret = fwnode_property_read_u32(child, "led-max-microamp", &led->max_microamp);
382 	if (!ret) {
383 		if (led->max_microamp < is31->cdef->current_min)
384 			return -EINVAL;	/* not supported */
385 		led->max_microamp = min(led->max_microamp,
386 					is31->cdef->current_max);
387 	}
388 
389 	return 0;
390 }
391 
392 static int is31fl319x_parse_fw(struct device *dev, struct is31fl319x_chip *is31)
393 {
394 	struct fwnode_handle *fwnode = dev_fwnode(dev), *child;
395 	int count;
396 	int ret;
397 
398 	is31->shutdown_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
399 	if (IS_ERR(is31->shutdown_gpio))
400 		return dev_err_probe(dev, PTR_ERR(is31->shutdown_gpio),
401 				     "Failed to get shutdown gpio\n");
402 
403 	is31->cdef = device_get_match_data(dev);
404 
405 	count = 0;
406 	fwnode_for_each_available_child_node(fwnode, child)
407 		count++;
408 
409 	dev_dbg(dev, "probing with %d leds defined in DT\n", count);
410 
411 	if (!count || count > is31->cdef->num_leds)
412 		return dev_err_probe(dev, -ENODEV,
413 				     "Number of leds defined must be between 1 and %u\n",
414 				     is31->cdef->num_leds);
415 
416 	fwnode_for_each_available_child_node(fwnode, child) {
417 		struct is31fl319x_led *led;
418 		u32 reg;
419 
420 		ret = fwnode_property_read_u32(child, "reg", &reg);
421 		if (ret) {
422 			ret = dev_err_probe(dev, ret, "Failed to read led 'reg' property\n");
423 			goto put_child_node;
424 		}
425 
426 		if (reg < 1 || reg > is31->cdef->num_leds) {
427 			ret = dev_err_probe(dev, -EINVAL, "invalid led reg %u\n", reg);
428 			goto put_child_node;
429 		}
430 
431 		led = &is31->leds[reg - 1];
432 
433 		if (led->configured) {
434 			ret = dev_err_probe(dev, -EINVAL, "led %u is already configured\n", reg);
435 			goto put_child_node;
436 		}
437 
438 		ret = is31fl319x_parse_child_fw(dev, child, led, is31);
439 		if (ret) {
440 			ret = dev_err_probe(dev, ret, "led %u DT parsing failed\n", reg);
441 			goto put_child_node;
442 		}
443 
444 		led->configured = true;
445 	}
446 
447 	is31->audio_gain_db = 0;
448 	if (is31->cdef->is_3196or3199) {
449 		ret = fwnode_property_read_u32(fwnode, "audio-gain-db", &is31->audio_gain_db);
450 		if (!ret)
451 			is31->audio_gain_db = min(is31->audio_gain_db,
452 						  IS31FL3196_AUDIO_GAIN_DB_MAX);
453 	}
454 
455 	return 0;
456 
457 put_child_node:
458 	fwnode_handle_put(child);
459 	return ret;
460 }
461 
462 static inline int is31fl3190_microamp_to_cs(struct device *dev, u32 microamp)
463 {
464 	switch (microamp) {
465 	case 5000:
466 		return IS31FL3190_CURRENT_5_mA;
467 	case 10000:
468 		return IS31FL3190_CURRENT_10_mA;
469 	case 17500:
470 		return IS31FL3190_CURRENT_17dot5_mA;
471 	case 30000:
472 		return IS31FL3190_CURRENT_30_mA;
473 	case 42000:
474 		return IS31FL3190_CURRENT_42_mA;
475 	default:
476 		dev_warn(dev, "Unsupported current value: %d, using 5000 µA!\n", microamp);
477 		return IS31FL3190_CURRENT_5_mA;
478 	}
479 }
480 
481 static inline int is31fl3196_microamp_to_cs(struct device *dev, u32 microamp)
482 {
483 	/* round down to nearest supported value (range check done by caller) */
484 	u32 step = microamp / IS31FL3196_CURRENT_uA_STEP;
485 
486 	return ((IS31FL3196_CONFIG2_CS_STEP_REF - step) &
487 		IS31FL3196_CONFIG2_CS_MASK) <<
488 		IS31FL3196_CONFIG2_CS_SHIFT; /* CS encoding */
489 }
490 
491 static inline int is31fl3196_db_to_gain(u32 dezibel)
492 {
493 	/* round down to nearest supported value (range check done by caller) */
494 	return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP;
495 }
496 
497 static int is31fl319x_probe(struct i2c_client *client)
498 {
499 	struct is31fl319x_chip *is31;
500 	struct device *dev = &client->dev;
501 	int err;
502 	int i = 0;
503 	u32 aggregated_led_microamp;
504 
505 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
506 		return -EIO;
507 
508 	is31 = devm_kzalloc(&client->dev, sizeof(*is31), GFP_KERNEL);
509 	if (!is31)
510 		return -ENOMEM;
511 
512 	mutex_init(&is31->lock);
513 	err = devm_add_action(dev, (void (*)(void *))mutex_destroy, &is31->lock);
514 	if (err)
515 		return err;
516 
517 	err = is31fl319x_parse_fw(&client->dev, is31);
518 	if (err)
519 		return err;
520 
521 	if (is31->shutdown_gpio) {
522 		gpiod_direction_output(is31->shutdown_gpio, 0);
523 		mdelay(5);
524 		gpiod_direction_output(is31->shutdown_gpio, 1);
525 	}
526 
527 	is31->client = client;
528 	is31->regmap = devm_regmap_init_i2c(client, is31->cdef->is31fl319x_regmap_config);
529 	if (IS_ERR(is31->regmap))
530 		return dev_err_probe(dev, PTR_ERR(is31->regmap), "failed to allocate register map\n");
531 
532 	i2c_set_clientdata(client, is31);
533 
534 	/* check for write-reply from chip (we can't read any registers) */
535 	err = regmap_write(is31->regmap, is31->cdef->reset_reg, 0x00);
536 	if (err < 0)
537 		return dev_err_probe(dev, err, "no response from chip write\n");
538 
539 	/*
540 	 * Kernel conventions require per-LED led-max-microamp property.
541 	 * But the chip does not allow to limit individual LEDs.
542 	 * So we take minimum from all subnodes for safety of hardware.
543 	 */
544 	aggregated_led_microamp = is31->cdef->current_max;
545 	for (i = 0; i < is31->cdef->num_leds; i++)
546 		if (is31->leds[i].configured &&
547 		    is31->leds[i].max_microamp < aggregated_led_microamp)
548 			aggregated_led_microamp = is31->leds[i].max_microamp;
549 
550 	if (is31->cdef->is_3196or3199)
551 		regmap_write(is31->regmap, IS31FL3196_CONFIG2,
552 			     is31fl3196_microamp_to_cs(dev, aggregated_led_microamp) |
553 			     is31fl3196_db_to_gain(is31->audio_gain_db));
554 	else
555 		regmap_update_bits(is31->regmap, IS31FL3190_CURRENT, IS31FL3190_CURRENT_MASK,
556 				   is31fl3190_microamp_to_cs(dev, aggregated_led_microamp));
557 
558 	for (i = 0; i < is31->cdef->num_leds; i++) {
559 		struct is31fl319x_led *led = &is31->leds[i];
560 
561 		if (!led->configured)
562 			continue;
563 
564 		led->chip = is31;
565 		led->cdev.brightness_set_blocking = is31->cdef->brightness_set;
566 
567 		err = devm_led_classdev_register(&client->dev, &led->cdev);
568 		if (err < 0)
569 			return err;
570 	}
571 
572 	return 0;
573 }
574 
575 /*
576  * i2c-core (and modalias) requires that id_table be properly filled,
577  * even though it is not used for DeviceTree based instantiation.
578  */
579 static const struct i2c_device_id is31fl319x_id[] = {
580 	{ "is31fl3190" },
581 	{ "is31fl3191" },
582 	{ "is31fl3193" },
583 	{ "is31fl3196" },
584 	{ "is31fl3199" },
585 	{ "sn3190" },
586 	{ "sn3191" },
587 	{ "sn3193" },
588 	{ "sn3196" },
589 	{ "sn3199" },
590 	{},
591 };
592 MODULE_DEVICE_TABLE(i2c, is31fl319x_id);
593 
594 static struct i2c_driver is31fl319x_driver = {
595 	.driver   = {
596 		.name           = "leds-is31fl319x",
597 		.of_match_table = of_is31fl319x_match,
598 	},
599 	.probe_new = is31fl319x_probe,
600 	.id_table = is31fl319x_id,
601 };
602 
603 module_i2c_driver(is31fl319x_driver);
604 
605 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
606 MODULE_AUTHOR("Andrey Utkin <andrey_utkin@fastmail.com>");
607 MODULE_DESCRIPTION("IS31FL319X LED driver");
608 MODULE_LICENSE("GPL v2");
609