1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_MACIISI 34 bool "Include Mac IIsi ADB driver" 35 depends on ADB && MAC 36 help 37 Say Y here if want your kernel to support Macintosh systems that use 38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 39 II, LC, LC II, LC III, Performa 460, and the Performa 600. 40 41config ADB_IOP 42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 43 depends on ADB && MAC 44 help 45 The I/O Processor (IOP) is an Apple custom IC designed to provide 46 intelligent support for I/O controllers. It is described at 47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 48 support for it, say 'Y' here. 49 50config ADB_PMU68K 51 bool "Include PMU (Powerbook) ADB driver" 52 depends on ADB && MAC 53 help 54 Say Y here if want your kernel to support the m68k based Powerbooks. 55 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 60 61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 62config ADB_CUDA 63 bool "Support for CUDA based Macs and PowerMacs" 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 65 help 66 This provides support for CUDA based Macintosh and Power Macintosh 67 systems. This includes many m68k based Macs (Color Classic, Mac TV, 68 Performa 475, Performa 520, Performa 550, Performa 575, 69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 73 even if your machine doesn't have a CUDA. 74 75 If unsure say Y. 76 77config ADB_PMU 78 bool "Support for PMU based PowerMacs" 79 depends on PPC_PMAC 80 help 81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 82 PMU is an embedded microprocessor whose primary function is to 83 control system power, and battery charging on the portable models. 84 The PMU also controls the ADB (Apple Desktop Bus) which connects to 85 the keyboard and mouse on some machines, as well as the non-volatile 86 RAM and the RTC (real time clock) chip. Say Y to enable support for 87 this device; you should do so if your machine is one of those 88 mentioned above. 89 90config ADB_PMU_LED 91 bool "Support for the Power/iBook front LED" 92 depends on ADB_PMU 93 select NEW_LEDS 94 select LEDS_CLASS 95 help 96 Support the front LED on Power/iBooks as a generic LED that can 97 be triggered by any of the supported triggers. To get the 98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 99 and the ide-disk LED trigger and configure appropriately through 100 sysfs. 101 102config ADB_PMU_LED_IDE 103 bool "Use front LED as IDE LED by default" 104 depends on ADB_PMU_LED 105 depends on LEDS_CLASS 106 select LEDS_TRIGGERS 107 select LEDS_TRIGGER_IDE_DISK 108 help 109 This option makes the front LED default to the IDE trigger 110 so that it blinks on IDE activity. 111 112config PMAC_SMU 113 bool "Support for SMU based PowerMacs" 114 depends on PPC_PMAC64 115 help 116 This option adds support for the newer G5 iMacs and PowerMacs based 117 on the "SMU" system control chip which replaces the old PMU. 118 If you don't know, say Y. 119 120config PMAC_APM_EMU 121 tristate "APM emulation" 122 select APM_EMULATION 123 depends on ADB_PMU && PM && PPC32 124 125config PMAC_MEDIABAY 126 bool "Support PowerBook hotswap media bay" 127 depends on PPC_PMAC && PPC32 && BLOCK 128 help 129 This option adds support for older PowerBook's hotswap media bay 130 that can contains batteries, floppy drives, or IDE devices. PCI 131 devices are not fully supported in the bay as I never had one to 132 try with 133 134config PMAC_BACKLIGHT 135 bool "Backlight control for LCD screens" 136 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 137 select FB_BACKLIGHT 138 help 139 Say Y here to enable Macintosh specific extensions of the generic 140 backlight code. With this enabled, the brightness keys on older 141 PowerBooks will be enabled so you can change the screen brightness. 142 Newer models should use a userspace daemon like pbbuttonsd. 143 144config PMAC_BACKLIGHT_LEGACY 145 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 146 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 147 help 148 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 149 programs which use this old interface. New and updated programs 150 should use the backlight classes in sysfs. 151 152config ADB_MACIO 153 bool "Include MacIO (CHRP) ADB driver" 154 depends on ADB && PPC_CHRP && !PPC_PMAC64 155 help 156 Say Y here to include direct support for the ADB controller in the 157 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 158 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 159 OpenPIC controller and two RS422/Geoports.) 160 161config INPUT_ADBHID 162 bool "Support for ADB input devices (keyboard, mice, ...)" 163 depends on ADB && INPUT=y 164 help 165 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 166 such as keyboards, mice, joysticks, trackpads or graphic tablets 167 handled by the input layer. If you say Y here, make sure to say Y to 168 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 169 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 170 support" (CONFIG_INPUT_EVDEV) as well. 171 172 If unsure, say Y. 173 174config MAC_EMUMOUSEBTN 175 tristate "Support for mouse button 2+3 emulation" 176 depends on SYSCTL && INPUT 177 help 178 This provides generic support for emulating the 2nd and 3rd mouse 179 button with keypresses. If you say Y here, the emulation is still 180 disabled by default. The emulation is controlled by these sysctl 181 entries: 182 /proc/sys/dev/mac_hid/mouse_button_emulation 183 /proc/sys/dev/mac_hid/mouse_button2_keycode 184 /proc/sys/dev/mac_hid/mouse_button3_keycode 185 186 If you have an Apple machine with a 1-button mouse, say Y here. 187 188 To compile this driver as a module, choose M here: the 189 module will be called mac_hid. 190 191config THERM_WINDTUNNEL 192 tristate "Support for thermal management on Windtunnel G4s" 193 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 194 help 195 This driver provides some thermostat and fan control for the desktop 196 G4 "Windtunnel" 197 198config THERM_ADT746X 199 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 200 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 201 help 202 This driver provides some thermostat and fan control for the 203 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 204 better fan behaviour by default, and some manual control. 205 206config THERM_PM72 207 tristate "Support for thermal management on PowerMac G5 (AGP)" 208 depends on I2C && I2C_POWERMAC && PPC_PMAC64 209 default n 210 help 211 This driver provides thermostat and fan control for the desktop 212 G5 machines. 213 214 This is deprecated, use windfarm instead. 215 216config WINDFARM 217 tristate "New PowerMac thermal control infrastructure" 218 depends on PPC 219 220config WINDFARM_PM81 221 tristate "Support for thermal management on iMac G5" 222 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 223 select I2C_POWERMAC 224 help 225 This driver provides thermal control for the iMacG5 226 227config WINDFARM_PM72 228 tristate "Support for thermal management on PowerMac G5 (AGP)" 229 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 230 select I2C_POWERMAC 231 help 232 This driver provides thermal control for the PowerMac G5 233 "AGP" variants (PowerMac 7,2 and 7,3) 234 235config WINDFARM_RM31 236 tristate "Support for thermal management on Xserve G5" 237 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 238 select I2C_POWERMAC 239 help 240 This driver provides thermal control for the Xserve G5 241 (RackMac3,1) 242 243config WINDFARM_PM91 244 tristate "Support for thermal management on PowerMac9,1" 245 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 246 select I2C_POWERMAC 247 help 248 This driver provides thermal control for the PowerMac9,1 249 which is the recent (SMU based) single CPU desktop G5 250 251config WINDFARM_PM112 252 tristate "Support for thermal management on PowerMac11,2" 253 depends on WINDFARM && I2C && PMAC_SMU 254 select I2C_POWERMAC 255 help 256 This driver provides thermal control for the PowerMac11,2 257 which are the recent dual and quad G5 machines using the 258 970MP dual-core processor. 259 260config WINDFARM_PM121 261 tristate "Support for thermal management on PowerMac12,1" 262 depends on WINDFARM && I2C && PMAC_SMU 263 select I2C_POWERMAC 264 help 265 This driver provides thermal control for the PowerMac12,1 266 which is the iMac G5 (iSight). 267 268config ANSLCD 269 tristate "Support for ANS LCD display" 270 depends on ADB_CUDA && PPC_PMAC 271 272config PMAC_RACKMETER 273 tristate "Support for Apple XServe front panel LEDs" 274 depends on PPC_PMAC 275 help 276 This driver provides some support to control the front panel 277 blue LEDs "vu-meter" of the XServer macs. 278 279config SENSORS_AMS 280 tristate "Apple Motion Sensor driver" 281 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) 282 select INPUT_POLLDEV 283 help 284 Support for the motion sensor included in PowerBooks. Includes 285 implementations for PMU and I2C. 286 287 This driver can also be built as a module. If so, the module 288 will be called ams. 289 290config SENSORS_AMS_PMU 291 bool "PMU variant" 292 depends on SENSORS_AMS && ADB_PMU 293 default y 294 help 295 PMU variant of motion sensor, found in late 2005 PowerBooks. 296 297config SENSORS_AMS_I2C 298 bool "I2C variant" 299 depends on SENSORS_AMS && I2C 300 default y 301 help 302 I2C variant of motion sensor, found in early 2005 PowerBooks and 303 iBooks. 304 305endif # MACINTOSH_DRIVERS 306