1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* DVB USB compliant Linux driver for the Afatech 9005 3 * USB1.1 DVB-T receiver. 4 * 5 * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) 6 * 7 * Thanks to Afatech who kindly provided information. 8 * 9 * see Documentation/media/dvb-drivers/dvb-usb.rst for more information 10 */ 11 #include "af9005.h" 12 13 /* debug */ 14 int dvb_usb_af9005_debug; 15 module_param_named(debug, dvb_usb_af9005_debug, int, 0644); 16 MODULE_PARM_DESC(debug, 17 "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." 18 DVB_USB_DEBUG_STATUS); 19 /* enable obnoxious led */ 20 bool dvb_usb_af9005_led = true; 21 module_param_named(led, dvb_usb_af9005_led, bool, 0644); 22 MODULE_PARM_DESC(led, "enable led (default: 1)."); 23 24 /* eeprom dump */ 25 static int dvb_usb_af9005_dump_eeprom; 26 module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); 27 MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); 28 29 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 30 31 /* remote control decoder */ 32 static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, 33 u32 *event, int *state); 34 static void *rc_keys; 35 static int *rc_keys_size; 36 37 u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; 38 39 struct af9005_device_state { 40 u8 sequence; 41 int led_state; 42 unsigned char data[256]; 43 }; 44 45 static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, 46 int readwrite, int type, u8 * values, int len) 47 { 48 struct af9005_device_state *st = d->priv; 49 u8 command, seq; 50 int i, ret; 51 52 if (len < 1) { 53 err("generic read/write, less than 1 byte. Makes no sense."); 54 return -EINVAL; 55 } 56 if (len > 8) { 57 err("generic read/write, more than 8 bytes. Not supported."); 58 return -EINVAL; 59 } 60 61 mutex_lock(&d->data_mutex); 62 st->data[0] = 14; /* rest of buffer length low */ 63 st->data[1] = 0; /* rest of buffer length high */ 64 65 st->data[2] = AF9005_REGISTER_RW; /* register operation */ 66 st->data[3] = 12; /* rest of buffer length */ 67 68 st->data[4] = seq = st->sequence++; /* sequence number */ 69 70 st->data[5] = (u8) (reg >> 8); /* register address */ 71 st->data[6] = (u8) (reg & 0xff); 72 73 if (type == AF9005_OFDM_REG) { 74 command = AF9005_CMD_OFDM_REG; 75 } else { 76 command = AF9005_CMD_TUNER; 77 } 78 79 if (len > 1) 80 command |= 81 AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3; 82 command |= readwrite; 83 if (readwrite == AF9005_CMD_WRITE) 84 for (i = 0; i < len; i++) 85 st->data[8 + i] = values[i]; 86 else if (type == AF9005_TUNER_REG) 87 /* read command for tuner, the first byte contains the i2c address */ 88 st->data[8] = values[0]; 89 st->data[7] = command; 90 91 ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0); 92 if (ret) 93 goto ret; 94 95 /* sanity check */ 96 if (st->data[2] != AF9005_REGISTER_RW_ACK) { 97 err("generic read/write, wrong reply code."); 98 ret = -EIO; 99 goto ret; 100 } 101 if (st->data[3] != 0x0d) { 102 err("generic read/write, wrong length in reply."); 103 ret = -EIO; 104 goto ret; 105 } 106 if (st->data[4] != seq) { 107 err("generic read/write, wrong sequence in reply."); 108 ret = -EIO; 109 goto ret; 110 } 111 /* 112 * In thesis, both input and output buffers should have 113 * identical values for st->data[5] to st->data[8]. 114 * However, windows driver doesn't check these fields, in fact 115 * sometimes the register in the reply is different that what 116 * has been sent 117 */ 118 if (st->data[16] != 0x01) { 119 err("generic read/write wrong status code in reply."); 120 ret = -EIO; 121 goto ret; 122 } 123 124 if (readwrite == AF9005_CMD_READ) 125 for (i = 0; i < len; i++) 126 values[i] = st->data[8 + i]; 127 128 ret: 129 mutex_unlock(&d->data_mutex); 130 return ret; 131 132 } 133 134 int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value) 135 { 136 int ret; 137 deb_reg("read register %x ", reg); 138 ret = af9005_generic_read_write(d, reg, 139 AF9005_CMD_READ, AF9005_OFDM_REG, 140 value, 1); 141 if (ret) 142 deb_reg("failed\n"); 143 else 144 deb_reg("value %x\n", *value); 145 return ret; 146 } 147 148 int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, 149 u8 * values, int len) 150 { 151 int ret; 152 deb_reg("read %d registers %x ", len, reg); 153 ret = af9005_generic_read_write(d, reg, 154 AF9005_CMD_READ, AF9005_OFDM_REG, 155 values, len); 156 if (ret) 157 deb_reg("failed\n"); 158 else 159 debug_dump(values, len, deb_reg); 160 return ret; 161 } 162 163 int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value) 164 { 165 int ret; 166 u8 temp = value; 167 deb_reg("write register %x value %x ", reg, value); 168 ret = af9005_generic_read_write(d, reg, 169 AF9005_CMD_WRITE, AF9005_OFDM_REG, 170 &temp, 1); 171 if (ret) 172 deb_reg("failed\n"); 173 else 174 deb_reg("ok\n"); 175 return ret; 176 } 177 178 int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, 179 u8 * values, int len) 180 { 181 int ret; 182 deb_reg("write %d registers %x values ", len, reg); 183 debug_dump(values, len, deb_reg); 184 185 ret = af9005_generic_read_write(d, reg, 186 AF9005_CMD_WRITE, AF9005_OFDM_REG, 187 values, len); 188 if (ret) 189 deb_reg("failed\n"); 190 else 191 deb_reg("ok\n"); 192 return ret; 193 } 194 195 int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, 196 u8 len, u8 * value) 197 { 198 u8 temp; 199 int ret; 200 deb_reg("read bits %x %x %x", reg, pos, len); 201 ret = af9005_read_ofdm_register(d, reg, &temp); 202 if (ret) { 203 deb_reg(" failed\n"); 204 return ret; 205 } 206 *value = (temp >> pos) & regmask[len - 1]; 207 deb_reg(" value %x\n", *value); 208 return 0; 209 210 } 211 212 int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, 213 u8 len, u8 value) 214 { 215 u8 temp, mask; 216 int ret; 217 deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value); 218 if (pos == 0 && len == 8) 219 return af9005_write_ofdm_register(d, reg, value); 220 ret = af9005_read_ofdm_register(d, reg, &temp); 221 if (ret) 222 return ret; 223 mask = regmask[len - 1] << pos; 224 temp = (temp & ~mask) | ((value << pos) & mask); 225 return af9005_write_ofdm_register(d, reg, temp); 226 227 } 228 229 static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d, 230 u16 reg, u8 * values, int len) 231 { 232 return af9005_generic_read_write(d, reg, 233 AF9005_CMD_READ, AF9005_TUNER_REG, 234 values, len); 235 } 236 237 static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d, 238 u16 reg, u8 * values, int len) 239 { 240 return af9005_generic_read_write(d, reg, 241 AF9005_CMD_WRITE, 242 AF9005_TUNER_REG, values, len); 243 } 244 245 int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, 246 u8 * values, int len) 247 { 248 /* don't let the name of this function mislead you: it's just used 249 as an interface from the firmware to the i2c bus. The actual 250 i2c addresses are contained in the data */ 251 int ret, i, done = 0, fail = 0; 252 u8 temp; 253 ret = af9005_usb_write_tuner_registers(d, reg, values, len); 254 if (ret) 255 return ret; 256 if (reg != 0xffff) { 257 /* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */ 258 for (i = 0; i < 200; i++) { 259 ret = 260 af9005_read_ofdm_register(d, 261 xd_I2C_i2c_m_status_wdat_done, 262 &temp); 263 if (ret) 264 return ret; 265 done = temp & (regmask[i2c_m_status_wdat_done_len - 1] 266 << i2c_m_status_wdat_done_pos); 267 if (done) 268 break; 269 fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1] 270 << i2c_m_status_wdat_fail_pos); 271 if (fail) 272 break; 273 msleep(50); 274 } 275 if (i == 200) 276 return -ETIMEDOUT; 277 if (fail) { 278 /* clear write fail bit */ 279 af9005_write_register_bits(d, 280 xd_I2C_i2c_m_status_wdat_fail, 281 i2c_m_status_wdat_fail_pos, 282 i2c_m_status_wdat_fail_len, 283 1); 284 return -EIO; 285 } 286 /* clear write done bit */ 287 ret = 288 af9005_write_register_bits(d, 289 xd_I2C_i2c_m_status_wdat_fail, 290 i2c_m_status_wdat_done_pos, 291 i2c_m_status_wdat_done_len, 1); 292 if (ret) 293 return ret; 294 } 295 return 0; 296 } 297 298 int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr, 299 u8 * values, int len) 300 { 301 /* don't let the name of this function mislead you: it's just used 302 as an interface from the firmware to the i2c bus. The actual 303 i2c addresses are contained in the data */ 304 int ret, i; 305 u8 temp, buf[2]; 306 307 buf[0] = addr; /* tuner i2c address */ 308 buf[1] = values[0]; /* tuner register */ 309 310 values[0] = addr + 0x01; /* i2c read address */ 311 312 if (reg == APO_REG_I2C_RW_SILICON_TUNER) { 313 /* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */ 314 ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2); 315 if (ret) 316 return ret; 317 } 318 319 /* send read command to ofsm */ 320 ret = af9005_usb_read_tuner_registers(d, reg, values, 1); 321 if (ret) 322 return ret; 323 324 /* check if read done */ 325 for (i = 0; i < 200; i++) { 326 ret = af9005_read_ofdm_register(d, 0xa408, &temp); 327 if (ret) 328 return ret; 329 if (temp & 0x01) 330 break; 331 msleep(50); 332 } 333 if (i == 200) 334 return -ETIMEDOUT; 335 336 /* clear read done bit (by writing 1) */ 337 ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1); 338 if (ret) 339 return ret; 340 341 /* get read data (available from 0xa400) */ 342 for (i = 0; i < len; i++) { 343 ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp); 344 if (ret) 345 return ret; 346 values[i] = temp; 347 } 348 return 0; 349 } 350 351 static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg, 352 u8 * data, int len) 353 { 354 int ret, i; 355 u8 buf[3]; 356 deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr, 357 reg, len); 358 debug_dump(data, len, deb_i2c); 359 360 for (i = 0; i < len; i++) { 361 buf[0] = i2caddr; 362 buf[1] = reg + (u8) i; 363 buf[2] = data[i]; 364 ret = 365 af9005_write_tuner_registers(d, 366 APO_REG_I2C_RW_SILICON_TUNER, 367 buf, 3); 368 if (ret) { 369 deb_i2c("i2c_write failed\n"); 370 return ret; 371 } 372 } 373 deb_i2c("i2c_write ok\n"); 374 return 0; 375 } 376 377 static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg, 378 u8 * data, int len) 379 { 380 int ret, i; 381 u8 temp; 382 deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len); 383 for (i = 0; i < len; i++) { 384 temp = reg + i; 385 ret = 386 af9005_read_tuner_registers(d, 387 APO_REG_I2C_RW_SILICON_TUNER, 388 i2caddr, &temp, 1); 389 if (ret) { 390 deb_i2c("i2c_read failed\n"); 391 return ret; 392 } 393 data[i] = temp; 394 } 395 deb_i2c("i2c data read: "); 396 debug_dump(data, len, deb_i2c); 397 return 0; 398 } 399 400 static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], 401 int num) 402 { 403 /* only implements what the mt2060 module does, don't know how 404 to make it really generic */ 405 struct dvb_usb_device *d = i2c_get_adapdata(adap); 406 int ret; 407 u8 reg, addr; 408 u8 *value; 409 410 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 411 return -EAGAIN; 412 413 if (num > 2) 414 warn("more than 2 i2c messages at a time is not handled yet. TODO."); 415 416 if (num == 2) { 417 /* reads a single register */ 418 reg = *msg[0].buf; 419 addr = msg[0].addr; 420 value = msg[1].buf; 421 ret = af9005_i2c_read(d, addr, reg, value, 1); 422 if (ret == 0) 423 ret = 2; 424 } else { 425 /* write one or more registers */ 426 reg = msg[0].buf[0]; 427 addr = msg[0].addr; 428 value = &msg[0].buf[1]; 429 ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1); 430 if (ret == 0) 431 ret = 1; 432 } 433 434 mutex_unlock(&d->i2c_mutex); 435 return ret; 436 } 437 438 static u32 af9005_i2c_func(struct i2c_adapter *adapter) 439 { 440 return I2C_FUNC_I2C; 441 } 442 443 static struct i2c_algorithm af9005_i2c_algo = { 444 .master_xfer = af9005_i2c_xfer, 445 .functionality = af9005_i2c_func, 446 }; 447 448 int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, 449 int wlen, u8 * rbuf, int rlen) 450 { 451 struct af9005_device_state *st = d->priv; 452 453 int ret, i, packet_len; 454 u8 seq; 455 456 if (wlen < 0) { 457 err("send command, wlen less than 0 bytes. Makes no sense."); 458 return -EINVAL; 459 } 460 if (wlen > 54) { 461 err("send command, wlen more than 54 bytes. Not supported."); 462 return -EINVAL; 463 } 464 if (rlen > 54) { 465 err("send command, rlen more than 54 bytes. Not supported."); 466 return -EINVAL; 467 } 468 packet_len = wlen + 5; 469 470 mutex_lock(&d->data_mutex); 471 472 st->data[0] = (u8) (packet_len & 0xff); 473 st->data[1] = (u8) ((packet_len & 0xff00) >> 8); 474 475 st->data[2] = 0x26; /* packet type */ 476 st->data[3] = wlen + 3; 477 st->data[4] = seq = st->sequence++; 478 st->data[5] = command; 479 st->data[6] = wlen; 480 for (i = 0; i < wlen; i++) 481 st->data[7 + i] = wbuf[i]; 482 ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0); 483 if (st->data[2] != 0x27) { 484 err("send command, wrong reply code."); 485 ret = -EIO; 486 } else if (st->data[4] != seq) { 487 err("send command, wrong sequence in reply."); 488 ret = -EIO; 489 } else if (st->data[5] != 0x01) { 490 err("send command, wrong status code in reply."); 491 ret = -EIO; 492 } else if (st->data[6] != rlen) { 493 err("send command, invalid data length in reply."); 494 ret = -EIO; 495 } 496 if (!ret) { 497 for (i = 0; i < rlen; i++) 498 rbuf[i] = st->data[i + 7]; 499 } 500 501 mutex_unlock(&d->data_mutex); 502 return ret; 503 } 504 505 int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, 506 int len) 507 { 508 struct af9005_device_state *st = d->priv; 509 u8 seq; 510 int ret, i; 511 512 mutex_lock(&d->data_mutex); 513 514 memset(st->data, 0, sizeof(st->data)); 515 516 st->data[0] = 14; /* length of rest of packet low */ 517 st->data[1] = 0; /* length of rest of packer high */ 518 519 st->data[2] = 0x2a; /* read/write eeprom */ 520 521 st->data[3] = 12; /* size */ 522 523 st->data[4] = seq = st->sequence++; 524 525 st->data[5] = 0; /* read */ 526 527 st->data[6] = len; 528 st->data[7] = address; 529 ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0); 530 if (st->data[2] != 0x2b) { 531 err("Read eeprom, invalid reply code"); 532 ret = -EIO; 533 } else if (st->data[3] != 10) { 534 err("Read eeprom, invalid reply length"); 535 ret = -EIO; 536 } else if (st->data[4] != seq) { 537 err("Read eeprom, wrong sequence in reply "); 538 ret = -EIO; 539 } else if (st->data[5] != 1) { 540 err("Read eeprom, wrong status in reply "); 541 ret = -EIO; 542 } 543 544 if (!ret) { 545 for (i = 0; i < len; i++) 546 values[i] = st->data[6 + i]; 547 } 548 mutex_unlock(&d->data_mutex); 549 550 return ret; 551 } 552 553 static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply, 554 u8 *buf, int size) 555 { 556 u16 checksum; 557 int act_len, i, ret; 558 559 memset(buf, 0, size); 560 buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); 561 buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); 562 switch (type) { 563 case FW_CONFIG: 564 buf[2] = 0x11; 565 buf[3] = 0x04; 566 buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ 567 buf[5] = 0x03; 568 checksum = buf[4] + buf[5]; 569 buf[6] = (u8) ((checksum >> 8) & 0xff); 570 buf[7] = (u8) (checksum & 0xff); 571 break; 572 case FW_CONFIRM: 573 buf[2] = 0x11; 574 buf[3] = 0x04; 575 buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ 576 buf[5] = 0x01; 577 checksum = buf[4] + buf[5]; 578 buf[6] = (u8) ((checksum >> 8) & 0xff); 579 buf[7] = (u8) (checksum & 0xff); 580 break; 581 case FW_BOOT: 582 buf[2] = 0x10; 583 buf[3] = 0x08; 584 buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ 585 buf[5] = 0x97; 586 buf[6] = 0xaa; 587 buf[7] = 0x55; 588 buf[8] = 0xa5; 589 buf[9] = 0x5a; 590 checksum = 0; 591 for (i = 4; i <= 9; i++) 592 checksum += buf[i]; 593 buf[10] = (u8) ((checksum >> 8) & 0xff); 594 buf[11] = (u8) (checksum & 0xff); 595 break; 596 default: 597 err("boot packet invalid boot packet type"); 598 return -EINVAL; 599 } 600 deb_fw(">>> "); 601 debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); 602 603 ret = usb_bulk_msg(udev, 604 usb_sndbulkpipe(udev, 0x02), 605 buf, FW_BULKOUT_SIZE + 2, &act_len, 2000); 606 if (ret) 607 err("boot packet bulk message failed: %d (%d/%d)", ret, 608 FW_BULKOUT_SIZE + 2, act_len); 609 else 610 ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0; 611 if (ret) 612 return ret; 613 memset(buf, 0, 9); 614 ret = usb_bulk_msg(udev, 615 usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000); 616 if (ret) { 617 err("boot packet recv bulk message failed: %d", ret); 618 return ret; 619 } 620 deb_fw("<<< "); 621 debug_dump(buf, act_len, deb_fw); 622 checksum = 0; 623 switch (type) { 624 case FW_CONFIG: 625 if (buf[2] != 0x11) { 626 err("boot bad config header."); 627 return -EIO; 628 } 629 if (buf[3] != 0x05) { 630 err("boot bad config size."); 631 return -EIO; 632 } 633 if (buf[4] != 0x00) { 634 err("boot bad config sequence."); 635 return -EIO; 636 } 637 if (buf[5] != 0x04) { 638 err("boot bad config subtype."); 639 return -EIO; 640 } 641 for (i = 4; i <= 6; i++) 642 checksum += buf[i]; 643 if (buf[7] * 256 + buf[8] != checksum) { 644 err("boot bad config checksum."); 645 return -EIO; 646 } 647 *reply = buf[6]; 648 break; 649 case FW_CONFIRM: 650 if (buf[2] != 0x11) { 651 err("boot bad confirm header."); 652 return -EIO; 653 } 654 if (buf[3] != 0x05) { 655 err("boot bad confirm size."); 656 return -EIO; 657 } 658 if (buf[4] != 0x00) { 659 err("boot bad confirm sequence."); 660 return -EIO; 661 } 662 if (buf[5] != 0x02) { 663 err("boot bad confirm subtype."); 664 return -EIO; 665 } 666 for (i = 4; i <= 6; i++) 667 checksum += buf[i]; 668 if (buf[7] * 256 + buf[8] != checksum) { 669 err("boot bad confirm checksum."); 670 return -EIO; 671 } 672 *reply = buf[6]; 673 break; 674 case FW_BOOT: 675 if (buf[2] != 0x10) { 676 err("boot bad boot header."); 677 return -EIO; 678 } 679 if (buf[3] != 0x05) { 680 err("boot bad boot size."); 681 return -EIO; 682 } 683 if (buf[4] != 0x00) { 684 err("boot bad boot sequence."); 685 return -EIO; 686 } 687 if (buf[5] != 0x01) { 688 err("boot bad boot pattern 01."); 689 return -EIO; 690 } 691 if (buf[6] != 0x10) { 692 err("boot bad boot pattern 10."); 693 return -EIO; 694 } 695 for (i = 4; i <= 6; i++) 696 checksum += buf[i]; 697 if (buf[7] * 256 + buf[8] != checksum) { 698 err("boot bad boot checksum."); 699 return -EIO; 700 } 701 break; 702 703 } 704 705 return 0; 706 } 707 708 static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) 709 { 710 int i, packets, ret, act_len; 711 712 u8 *buf; 713 u8 reply; 714 715 buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); 716 if (!buf) 717 return -ENOMEM; 718 719 ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, 720 FW_BULKOUT_SIZE + 2); 721 if (ret) 722 goto err; 723 if (reply != 0x01) { 724 err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); 725 ret = -EIO; 726 goto err; 727 } 728 packets = fw->size / FW_BULKOUT_SIZE; 729 buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); 730 buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); 731 for (i = 0; i < packets; i++) { 732 memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE, 733 FW_BULKOUT_SIZE); 734 deb_fw(">>> "); 735 debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); 736 ret = usb_bulk_msg(udev, 737 usb_sndbulkpipe(udev, 0x02), 738 buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); 739 if (ret) { 740 err("firmware download failed at packet %d with code %d", i, ret); 741 goto err; 742 } 743 } 744 ret = af9005_boot_packet(udev, FW_CONFIRM, &reply, 745 buf, FW_BULKOUT_SIZE + 2); 746 if (ret) 747 goto err; 748 if (reply != (u8) (packets & 0xff)) { 749 err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); 750 ret = -EIO; 751 goto err; 752 } 753 ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf, 754 FW_BULKOUT_SIZE + 2); 755 if (ret) 756 goto err; 757 ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, 758 FW_BULKOUT_SIZE + 2); 759 if (ret) 760 goto err; 761 if (reply != 0x02) { 762 err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); 763 ret = -EIO; 764 goto err; 765 } 766 767 err: 768 kfree(buf); 769 return ret; 770 771 } 772 773 int af9005_led_control(struct dvb_usb_device *d, int onoff) 774 { 775 struct af9005_device_state *st = d->priv; 776 int temp, ret; 777 778 if (onoff && dvb_usb_af9005_led) 779 temp = 1; 780 else 781 temp = 0; 782 if (st->led_state != temp) { 783 ret = 784 af9005_write_register_bits(d, xd_p_reg_top_locken1, 785 reg_top_locken1_pos, 786 reg_top_locken1_len, temp); 787 if (ret) 788 return ret; 789 ret = 790 af9005_write_register_bits(d, xd_p_reg_top_lock1, 791 reg_top_lock1_pos, 792 reg_top_lock1_len, temp); 793 if (ret) 794 return ret; 795 st->led_state = temp; 796 } 797 return 0; 798 } 799 800 static int af9005_frontend_attach(struct dvb_usb_adapter *adap) 801 { 802 u8 buf[8]; 803 int i; 804 805 /* without these calls the first commands after downloading 806 the firmware fail. I put these calls here to simulate 807 what it is done in dvb-usb-init.c. 808 */ 809 struct usb_device *udev = adap->dev->udev; 810 usb_clear_halt(udev, usb_sndbulkpipe(udev, 2)); 811 usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1)); 812 if (dvb_usb_af9005_dump_eeprom) { 813 printk("EEPROM DUMP\n"); 814 for (i = 0; i < 255; i += 8) { 815 af9005_read_eeprom(adap->dev, i, buf, 8); 816 debug_dump(buf, 8, printk); 817 } 818 } 819 adap->fe_adap[0].fe = af9005_fe_attach(adap->dev); 820 return 0; 821 } 822 823 static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) 824 { 825 struct af9005_device_state *st = d->priv; 826 int ret, len; 827 u8 seq; 828 829 *state = REMOTE_NO_KEY_PRESSED; 830 if (rc_decode == NULL) { 831 /* it shouldn't never come here */ 832 return 0; 833 } 834 835 mutex_lock(&d->data_mutex); 836 837 /* deb_info("rc_query\n"); */ 838 st->data[0] = 3; /* rest of packet length low */ 839 st->data[1] = 0; /* rest of packet length high */ 840 st->data[2] = 0x40; /* read remote */ 841 st->data[3] = 1; /* rest of packet length */ 842 st->data[4] = seq = st->sequence++; /* sequence number */ 843 ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0); 844 if (ret) { 845 err("rc query failed"); 846 goto ret; 847 } 848 if (st->data[2] != 0x41) { 849 err("rc query bad header."); 850 ret = -EIO; 851 goto ret; 852 } else if (st->data[4] != seq) { 853 err("rc query bad sequence."); 854 ret = -EIO; 855 goto ret; 856 } 857 len = st->data[5]; 858 if (len > 246) { 859 err("rc query invalid length"); 860 ret = -EIO; 861 goto ret; 862 } 863 if (len > 0) { 864 deb_rc("rc data (%d) ", len); 865 debug_dump((st->data + 6), len, deb_rc); 866 ret = rc_decode(d, &st->data[6], len, event, state); 867 if (ret) { 868 err("rc_decode failed"); 869 goto ret; 870 } else { 871 deb_rc("rc_decode state %x event %x\n", *state, *event); 872 if (*state == REMOTE_KEY_REPEAT) 873 *event = d->last_event; 874 } 875 } 876 877 ret: 878 mutex_unlock(&d->data_mutex); 879 return ret; 880 } 881 882 static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) 883 { 884 885 return 0; 886 } 887 888 static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) 889 { 890 int ret; 891 deb_info("pid filter control onoff %d\n", onoff); 892 if (onoff) { 893 ret = 894 af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); 895 if (ret) 896 return ret; 897 ret = 898 af9005_write_register_bits(adap->dev, 899 XD_MP2IF_DMX_CTRL, 1, 1, 1); 900 if (ret) 901 return ret; 902 ret = 903 af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); 904 } else 905 ret = 906 af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0); 907 if (ret) 908 return ret; 909 deb_info("pid filter control ok\n"); 910 return 0; 911 } 912 913 static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index, 914 u16 pid, int onoff) 915 { 916 u8 cmd = index & 0x1f; 917 int ret; 918 deb_info("set pid filter, index %d, pid %x, onoff %d\n", index, 919 pid, onoff); 920 if (onoff) { 921 /* cannot use it as pid_filter_ctrl since it has to be done 922 before setting the first pid */ 923 if (adap->feedcount == 1) { 924 deb_info("first pid set, enable pid table\n"); 925 ret = af9005_pid_filter_control(adap, onoff); 926 if (ret) 927 return ret; 928 } 929 ret = 930 af9005_write_ofdm_register(adap->dev, 931 XD_MP2IF_PID_DATA_L, 932 (u8) (pid & 0xff)); 933 if (ret) 934 return ret; 935 ret = 936 af9005_write_ofdm_register(adap->dev, 937 XD_MP2IF_PID_DATA_H, 938 (u8) (pid >> 8)); 939 if (ret) 940 return ret; 941 cmd |= 0x20 | 0x40; 942 } else { 943 if (adap->feedcount == 0) { 944 deb_info("last pid unset, disable pid table\n"); 945 ret = af9005_pid_filter_control(adap, onoff); 946 if (ret) 947 return ret; 948 } 949 } 950 ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd); 951 if (ret) 952 return ret; 953 deb_info("set pid ok\n"); 954 return 0; 955 } 956 957 static int af9005_identify_state(struct usb_device *udev, 958 struct dvb_usb_device_properties *props, 959 struct dvb_usb_device_description **desc, 960 int *cold) 961 { 962 int ret; 963 u8 reply, *buf; 964 965 buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); 966 if (!buf) 967 return -ENOMEM; 968 969 ret = af9005_boot_packet(udev, FW_CONFIG, &reply, 970 buf, FW_BULKOUT_SIZE + 2); 971 if (ret) 972 goto err; 973 deb_info("result of FW_CONFIG in identify state %d\n", reply); 974 if (reply == 0x01) 975 *cold = 1; 976 else if (reply == 0x02) 977 *cold = 0; 978 else 979 return -EIO; 980 deb_info("Identify state cold = %d\n", *cold); 981 982 err: 983 kfree(buf); 984 return ret; 985 } 986 987 static struct dvb_usb_device_properties af9005_properties; 988 989 static int af9005_usb_probe(struct usb_interface *intf, 990 const struct usb_device_id *id) 991 { 992 return dvb_usb_device_init(intf, &af9005_properties, 993 THIS_MODULE, NULL, adapter_nr); 994 } 995 996 enum af9005_usb_table_entry { 997 AFATECH_AF9005, 998 TERRATEC_AF9005, 999 ANSONIC_AF9005, 1000 }; 1001 1002 static struct usb_device_id af9005_usb_table[] = { 1003 [AFATECH_AF9005] = {USB_DEVICE(USB_VID_AFATECH, 1004 USB_PID_AFATECH_AF9005)}, 1005 [TERRATEC_AF9005] = {USB_DEVICE(USB_VID_TERRATEC, 1006 USB_PID_TERRATEC_CINERGY_T_USB_XE)}, 1007 [ANSONIC_AF9005] = {USB_DEVICE(USB_VID_ANSONIC, 1008 USB_PID_ANSONIC_DVBT_USB)}, 1009 { } 1010 }; 1011 1012 MODULE_DEVICE_TABLE(usb, af9005_usb_table); 1013 1014 static struct dvb_usb_device_properties af9005_properties = { 1015 .caps = DVB_USB_IS_AN_I2C_ADAPTER, 1016 1017 .usb_ctrl = DEVICE_SPECIFIC, 1018 .firmware = "af9005.fw", 1019 .download_firmware = af9005_download_firmware, 1020 .no_reconnect = 1, 1021 1022 .size_of_priv = sizeof(struct af9005_device_state), 1023 1024 .num_adapters = 1, 1025 .adapter = { 1026 { 1027 .num_frontends = 1, 1028 .fe = {{ 1029 .caps = 1030 DVB_USB_ADAP_HAS_PID_FILTER | 1031 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 1032 .pid_filter_count = 32, 1033 .pid_filter = af9005_pid_filter, 1034 /* .pid_filter_ctrl = af9005_pid_filter_control, */ 1035 .frontend_attach = af9005_frontend_attach, 1036 /* .tuner_attach = af9005_tuner_attach, */ 1037 /* parameter for the MPEG2-data transfer */ 1038 .stream = { 1039 .type = USB_BULK, 1040 .count = 10, 1041 .endpoint = 0x04, 1042 .u = { 1043 .bulk = { 1044 .buffersize = 4096, /* actual size seen is 3948 */ 1045 } 1046 } 1047 }, 1048 }}, 1049 } 1050 }, 1051 .power_ctrl = af9005_power_ctrl, 1052 .identify_state = af9005_identify_state, 1053 1054 .i2c_algo = &af9005_i2c_algo, 1055 1056 .rc.legacy = { 1057 .rc_interval = 200, 1058 .rc_map_table = NULL, 1059 .rc_map_size = 0, 1060 .rc_query = af9005_rc_query, 1061 }, 1062 1063 .generic_bulk_ctrl_endpoint = 2, 1064 .generic_bulk_ctrl_endpoint_response = 1, 1065 1066 .num_device_descs = 3, 1067 .devices = { 1068 {.name = "Afatech DVB-T USB1.1 stick", 1069 .cold_ids = {&af9005_usb_table[AFATECH_AF9005], NULL}, 1070 .warm_ids = {NULL}, 1071 }, 1072 {.name = "TerraTec Cinergy T USB XE", 1073 .cold_ids = {&af9005_usb_table[TERRATEC_AF9005], NULL}, 1074 .warm_ids = {NULL}, 1075 }, 1076 {.name = "Ansonic DVB-T USB1.1 stick", 1077 .cold_ids = {&af9005_usb_table[ANSONIC_AF9005], NULL}, 1078 .warm_ids = {NULL}, 1079 }, 1080 {NULL}, 1081 } 1082 }; 1083 1084 /* usb specific object needed to register this driver with the usb subsystem */ 1085 static struct usb_driver af9005_usb_driver = { 1086 .name = "dvb_usb_af9005", 1087 .probe = af9005_usb_probe, 1088 .disconnect = dvb_usb_device_exit, 1089 .id_table = af9005_usb_table, 1090 }; 1091 1092 /* module stuff */ 1093 static int __init af9005_usb_module_init(void) 1094 { 1095 int result; 1096 if ((result = usb_register(&af9005_usb_driver))) { 1097 err("usb_register failed. (%d)", result); 1098 return result; 1099 } 1100 #if IS_MODULE(CONFIG_DVB_USB_AF9005) || defined(CONFIG_DVB_USB_AF9005_REMOTE) 1101 /* FIXME: convert to todays kernel IR infrastructure */ 1102 rc_decode = symbol_request(af9005_rc_decode); 1103 rc_keys = symbol_request(rc_map_af9005_table); 1104 rc_keys_size = symbol_request(rc_map_af9005_table_size); 1105 #endif 1106 if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) { 1107 err("af9005_rc_decode function not found, disabling remote"); 1108 af9005_properties.rc.legacy.rc_query = NULL; 1109 } else { 1110 af9005_properties.rc.legacy.rc_map_table = rc_keys; 1111 af9005_properties.rc.legacy.rc_map_size = *rc_keys_size; 1112 } 1113 1114 return 0; 1115 } 1116 1117 static void __exit af9005_usb_module_exit(void) 1118 { 1119 /* release rc decode symbols */ 1120 if (rc_decode != NULL) 1121 symbol_put(af9005_rc_decode); 1122 if (rc_keys != NULL) 1123 symbol_put(rc_map_af9005_table); 1124 if (rc_keys_size != NULL) 1125 symbol_put(rc_map_af9005_table_size); 1126 /* deregister this driver from the USB subsystem */ 1127 usb_deregister(&af9005_usb_driver); 1128 } 1129 1130 module_init(af9005_usb_module_init); 1131 module_exit(af9005_usb_module_exit); 1132 1133 MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); 1134 MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick"); 1135 MODULE_VERSION("1.0"); 1136 MODULE_LICENSE("GPL"); 1137