1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * sgiseeq.c: Seeq8003 ethernet driver for SGI machines. 4 * 5 * Copyright (C) 1996 David S. Miller (davem@davemloft.net) 6 */ 7 8 #undef DEBUG 9 10 #include <linux/dma-mapping.h> 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/slab.h> 14 #include <linux/errno.h> 15 #include <linux/types.h> 16 #include <linux/interrupt.h> 17 #include <linux/string.h> 18 #include <linux/delay.h> 19 #include <linux/netdevice.h> 20 #include <linux/platform_device.h> 21 #include <linux/etherdevice.h> 22 #include <linux/skbuff.h> 23 24 #include <asm/sgi/hpc3.h> 25 #include <asm/sgi/ip22.h> 26 #include <asm/sgi/seeq.h> 27 28 #include "sgiseeq.h" 29 30 static char *sgiseeqstr = "SGI Seeq8003"; 31 32 /* 33 * If you want speed, you do something silly, it always has worked for me. So, 34 * with that in mind, I've decided to make this driver look completely like a 35 * stupid Lance from a driver architecture perspective. Only difference is that 36 * here our "ring buffer" looks and acts like a real Lance one does but is 37 * laid out like how the HPC DMA and the Seeq want it to. You'd be surprised 38 * how a stupid idea like this can pay off in performance, not to mention 39 * making this driver 2,000 times easier to write. ;-) 40 */ 41 42 /* Tune these if we tend to run out often etc. */ 43 #define SEEQ_RX_BUFFERS 16 44 #define SEEQ_TX_BUFFERS 16 45 46 #define PKT_BUF_SZ 1584 47 48 #define NEXT_RX(i) (((i) + 1) & (SEEQ_RX_BUFFERS - 1)) 49 #define NEXT_TX(i) (((i) + 1) & (SEEQ_TX_BUFFERS - 1)) 50 #define PREV_RX(i) (((i) - 1) & (SEEQ_RX_BUFFERS - 1)) 51 #define PREV_TX(i) (((i) - 1) & (SEEQ_TX_BUFFERS - 1)) 52 53 #define TX_BUFFS_AVAIL(sp) ((sp->tx_old <= sp->tx_new) ? \ 54 sp->tx_old + (SEEQ_TX_BUFFERS - 1) - sp->tx_new : \ 55 sp->tx_old - sp->tx_new - 1) 56 57 #define VIRT_TO_DMA(sp, v) ((sp)->srings_dma + \ 58 (dma_addr_t)((unsigned long)(v) - \ 59 (unsigned long)((sp)->rx_desc))) 60 61 /* Copy frames shorter than rx_copybreak, otherwise pass on up in 62 * a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha). 63 */ 64 static int rx_copybreak = 100; 65 66 #define PAD_SIZE (128 - sizeof(struct hpc_dma_desc) - sizeof(void *)) 67 68 struct sgiseeq_rx_desc { 69 volatile struct hpc_dma_desc rdma; 70 u8 padding[PAD_SIZE]; 71 struct sk_buff *skb; 72 }; 73 74 struct sgiseeq_tx_desc { 75 volatile struct hpc_dma_desc tdma; 76 u8 padding[PAD_SIZE]; 77 struct sk_buff *skb; 78 }; 79 80 /* 81 * Warning: This structure is laid out in a certain way because HPC dma 82 * descriptors must be 8-byte aligned. So don't touch this without 83 * some care. 84 */ 85 struct sgiseeq_init_block { /* Note the name ;-) */ 86 struct sgiseeq_rx_desc rxvector[SEEQ_RX_BUFFERS]; 87 struct sgiseeq_tx_desc txvector[SEEQ_TX_BUFFERS]; 88 }; 89 90 struct sgiseeq_private { 91 struct sgiseeq_init_block *srings; 92 dma_addr_t srings_dma; 93 94 /* Ptrs to the descriptors in uncached space. */ 95 struct sgiseeq_rx_desc *rx_desc; 96 struct sgiseeq_tx_desc *tx_desc; 97 98 char *name; 99 struct hpc3_ethregs *hregs; 100 struct sgiseeq_regs *sregs; 101 102 /* Ring entry counters. */ 103 unsigned int rx_new, tx_new; 104 unsigned int rx_old, tx_old; 105 106 int is_edlc; 107 unsigned char control; 108 unsigned char mode; 109 110 spinlock_t tx_lock; 111 }; 112 113 static inline void dma_sync_desc_cpu(struct net_device *dev, void *addr) 114 { 115 dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), 116 DMA_FROM_DEVICE); 117 } 118 119 static inline void dma_sync_desc_dev(struct net_device *dev, void *addr) 120 { 121 dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), 122 DMA_TO_DEVICE); 123 } 124 125 static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) 126 { 127 hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; 128 udelay(20); 129 hregs->reset = 0; 130 } 131 132 static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, 133 struct sgiseeq_regs *sregs) 134 { 135 hregs->rx_ctrl = hregs->tx_ctrl = 0; 136 hpc3_eth_reset(hregs); 137 } 138 139 #define RSTAT_GO_BITS (SEEQ_RCMD_IGOOD | SEEQ_RCMD_IEOF | SEEQ_RCMD_ISHORT | \ 140 SEEQ_RCMD_IDRIB | SEEQ_RCMD_ICRC) 141 142 static inline void seeq_go(struct sgiseeq_private *sp, 143 struct hpc3_ethregs *hregs, 144 struct sgiseeq_regs *sregs) 145 { 146 sregs->rstat = sp->mode | RSTAT_GO_BITS; 147 hregs->rx_ctrl = HPC3_ERXCTRL_ACTIVE; 148 } 149 150 static inline void __sgiseeq_set_mac_address(struct net_device *dev) 151 { 152 struct sgiseeq_private *sp = netdev_priv(dev); 153 struct sgiseeq_regs *sregs = sp->sregs; 154 int i; 155 156 sregs->tstat = SEEQ_TCMD_RB0; 157 for (i = 0; i < 6; i++) 158 sregs->rw.eth_addr[i] = dev->dev_addr[i]; 159 } 160 161 static int sgiseeq_set_mac_address(struct net_device *dev, void *addr) 162 { 163 struct sgiseeq_private *sp = netdev_priv(dev); 164 struct sockaddr *sa = addr; 165 166 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); 167 168 spin_lock_irq(&sp->tx_lock); 169 __sgiseeq_set_mac_address(dev); 170 spin_unlock_irq(&sp->tx_lock); 171 172 return 0; 173 } 174 175 #define TCNTINFO_INIT (HPCDMA_EOX | HPCDMA_ETXD) 176 #define RCNTCFG_INIT (HPCDMA_OWN | HPCDMA_EORP | HPCDMA_XIE) 177 #define RCNTINFO_INIT (RCNTCFG_INIT | (PKT_BUF_SZ & HPCDMA_BCNT)) 178 179 static int seeq_init_ring(struct net_device *dev) 180 { 181 struct sgiseeq_private *sp = netdev_priv(dev); 182 int i; 183 184 netif_stop_queue(dev); 185 sp->rx_new = sp->tx_new = 0; 186 sp->rx_old = sp->tx_old = 0; 187 188 __sgiseeq_set_mac_address(dev); 189 190 /* Setup tx ring. */ 191 for(i = 0; i < SEEQ_TX_BUFFERS; i++) { 192 sp->tx_desc[i].tdma.cntinfo = TCNTINFO_INIT; 193 dma_sync_desc_dev(dev, &sp->tx_desc[i]); 194 } 195 196 /* And now the rx ring. */ 197 for (i = 0; i < SEEQ_RX_BUFFERS; i++) { 198 if (!sp->rx_desc[i].skb) { 199 dma_addr_t dma_addr; 200 struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ); 201 202 if (skb == NULL) 203 return -ENOMEM; 204 skb_reserve(skb, 2); 205 dma_addr = dma_map_single(dev->dev.parent, 206 skb->data - 2, 207 PKT_BUF_SZ, DMA_FROM_DEVICE); 208 sp->rx_desc[i].skb = skb; 209 sp->rx_desc[i].rdma.pbuf = dma_addr; 210 } 211 sp->rx_desc[i].rdma.cntinfo = RCNTINFO_INIT; 212 dma_sync_desc_dev(dev, &sp->rx_desc[i]); 213 } 214 sp->rx_desc[i - 1].rdma.cntinfo |= HPCDMA_EOR; 215 dma_sync_desc_dev(dev, &sp->rx_desc[i - 1]); 216 return 0; 217 } 218 219 static void seeq_purge_ring(struct net_device *dev) 220 { 221 struct sgiseeq_private *sp = netdev_priv(dev); 222 int i; 223 224 /* clear tx ring. */ 225 for (i = 0; i < SEEQ_TX_BUFFERS; i++) { 226 if (sp->tx_desc[i].skb) { 227 dev_kfree_skb(sp->tx_desc[i].skb); 228 sp->tx_desc[i].skb = NULL; 229 } 230 } 231 232 /* And now the rx ring. */ 233 for (i = 0; i < SEEQ_RX_BUFFERS; i++) { 234 if (sp->rx_desc[i].skb) { 235 dev_kfree_skb(sp->rx_desc[i].skb); 236 sp->rx_desc[i].skb = NULL; 237 } 238 } 239 } 240 241 #ifdef DEBUG 242 static struct sgiseeq_private *gpriv; 243 static struct net_device *gdev; 244 245 static void sgiseeq_dump_rings(void) 246 { 247 static int once; 248 struct sgiseeq_rx_desc *r = gpriv->rx_desc; 249 struct sgiseeq_tx_desc *t = gpriv->tx_desc; 250 struct hpc3_ethregs *hregs = gpriv->hregs; 251 int i; 252 253 if (once) 254 return; 255 once++; 256 printk("RING DUMP:\n"); 257 for (i = 0; i < SEEQ_RX_BUFFERS; i++) { 258 printk("RX [%d]: @(%p) [%08x,%08x,%08x] ", 259 i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, 260 r[i].rdma.pnext); 261 i += 1; 262 printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", 263 i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, 264 r[i].rdma.pnext); 265 } 266 for (i = 0; i < SEEQ_TX_BUFFERS; i++) { 267 printk("TX [%d]: @(%p) [%08x,%08x,%08x] ", 268 i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, 269 t[i].tdma.pnext); 270 i += 1; 271 printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", 272 i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, 273 t[i].tdma.pnext); 274 } 275 printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n", 276 gpriv->rx_new, gpriv->rx_old, gpriv->tx_new, gpriv->tx_old); 277 printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n", 278 hregs->rx_cbptr, hregs->rx_ndptr, hregs->rx_ctrl); 279 printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n", 280 hregs->tx_cbptr, hregs->tx_ndptr, hregs->tx_ctrl); 281 } 282 #endif 283 284 #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) 285 #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) 286 287 static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, 288 struct sgiseeq_regs *sregs) 289 { 290 struct hpc3_ethregs *hregs = sp->hregs; 291 int err; 292 293 reset_hpc3_and_seeq(hregs, sregs); 294 err = seeq_init_ring(dev); 295 if (err) 296 return err; 297 298 /* Setup to field the proper interrupt types. */ 299 if (sp->is_edlc) { 300 sregs->tstat = TSTAT_INIT_EDLC; 301 sregs->rw.wregs.control = sp->control; 302 sregs->rw.wregs.frame_gap = 0; 303 } else { 304 sregs->tstat = TSTAT_INIT_SEEQ; 305 } 306 307 hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc); 308 hregs->tx_ndptr = VIRT_TO_DMA(sp, sp->tx_desc); 309 310 seeq_go(sp, hregs, sregs); 311 return 0; 312 } 313 314 static void record_rx_errors(struct net_device *dev, unsigned char status) 315 { 316 if (status & SEEQ_RSTAT_OVERF || 317 status & SEEQ_RSTAT_SFRAME) 318 dev->stats.rx_over_errors++; 319 if (status & SEEQ_RSTAT_CERROR) 320 dev->stats.rx_crc_errors++; 321 if (status & SEEQ_RSTAT_DERROR) 322 dev->stats.rx_frame_errors++; 323 if (status & SEEQ_RSTAT_REOF) 324 dev->stats.rx_errors++; 325 } 326 327 static inline void rx_maybe_restart(struct sgiseeq_private *sp, 328 struct hpc3_ethregs *hregs, 329 struct sgiseeq_regs *sregs) 330 { 331 if (!(hregs->rx_ctrl & HPC3_ERXCTRL_ACTIVE)) { 332 hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc + sp->rx_new); 333 seeq_go(sp, hregs, sregs); 334 } 335 } 336 337 static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp, 338 struct hpc3_ethregs *hregs, 339 struct sgiseeq_regs *sregs) 340 { 341 struct sgiseeq_rx_desc *rd; 342 struct sk_buff *skb = NULL; 343 struct sk_buff *newskb; 344 unsigned char pkt_status; 345 int len = 0; 346 unsigned int orig_end = PREV_RX(sp->rx_new); 347 348 /* Service every received packet. */ 349 rd = &sp->rx_desc[sp->rx_new]; 350 dma_sync_desc_cpu(dev, rd); 351 while (!(rd->rdma.cntinfo & HPCDMA_OWN)) { 352 len = PKT_BUF_SZ - (rd->rdma.cntinfo & HPCDMA_BCNT) - 3; 353 dma_unmap_single(dev->dev.parent, rd->rdma.pbuf, 354 PKT_BUF_SZ, DMA_FROM_DEVICE); 355 pkt_status = rd->skb->data[len]; 356 if (pkt_status & SEEQ_RSTAT_FIG) { 357 /* Packet is OK. */ 358 /* We don't want to receive our own packets */ 359 if (!ether_addr_equal(rd->skb->data + 6, dev->dev_addr)) { 360 if (len > rx_copybreak) { 361 skb = rd->skb; 362 newskb = netdev_alloc_skb(dev, PKT_BUF_SZ); 363 if (!newskb) { 364 newskb = skb; 365 skb = NULL; 366 goto memory_squeeze; 367 } 368 skb_reserve(newskb, 2); 369 } else { 370 skb = netdev_alloc_skb_ip_align(dev, len); 371 if (skb) 372 skb_copy_to_linear_data(skb, rd->skb->data, len); 373 374 newskb = rd->skb; 375 } 376 memory_squeeze: 377 if (skb) { 378 skb_put(skb, len); 379 skb->protocol = eth_type_trans(skb, dev); 380 netif_rx(skb); 381 dev->stats.rx_packets++; 382 dev->stats.rx_bytes += len; 383 } else { 384 dev->stats.rx_dropped++; 385 } 386 } else { 387 /* Silently drop my own packets */ 388 newskb = rd->skb; 389 } 390 } else { 391 record_rx_errors(dev, pkt_status); 392 newskb = rd->skb; 393 } 394 rd->skb = newskb; 395 rd->rdma.pbuf = dma_map_single(dev->dev.parent, 396 newskb->data - 2, 397 PKT_BUF_SZ, DMA_FROM_DEVICE); 398 399 /* Return the entry to the ring pool. */ 400 rd->rdma.cntinfo = RCNTINFO_INIT; 401 sp->rx_new = NEXT_RX(sp->rx_new); 402 dma_sync_desc_dev(dev, rd); 403 rd = &sp->rx_desc[sp->rx_new]; 404 dma_sync_desc_cpu(dev, rd); 405 } 406 dma_sync_desc_cpu(dev, &sp->rx_desc[orig_end]); 407 sp->rx_desc[orig_end].rdma.cntinfo &= ~(HPCDMA_EOR); 408 dma_sync_desc_dev(dev, &sp->rx_desc[orig_end]); 409 dma_sync_desc_cpu(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); 410 sp->rx_desc[PREV_RX(sp->rx_new)].rdma.cntinfo |= HPCDMA_EOR; 411 dma_sync_desc_dev(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); 412 rx_maybe_restart(sp, hregs, sregs); 413 } 414 415 static inline void tx_maybe_reset_collisions(struct sgiseeq_private *sp, 416 struct sgiseeq_regs *sregs) 417 { 418 if (sp->is_edlc) { 419 sregs->rw.wregs.control = sp->control & ~(SEEQ_CTRL_XCNT); 420 sregs->rw.wregs.control = sp->control; 421 } 422 } 423 424 static inline void kick_tx(struct net_device *dev, 425 struct sgiseeq_private *sp, 426 struct hpc3_ethregs *hregs) 427 { 428 struct sgiseeq_tx_desc *td; 429 int i = sp->tx_old; 430 431 /* If the HPC aint doin nothin, and there are more packets 432 * with ETXD cleared and XIU set we must make very certain 433 * that we restart the HPC else we risk locking up the 434 * adapter. The following code is only safe iff the HPCDMA 435 * is not active! 436 */ 437 td = &sp->tx_desc[i]; 438 dma_sync_desc_cpu(dev, td); 439 while ((td->tdma.cntinfo & (HPCDMA_XIU | HPCDMA_ETXD)) == 440 (HPCDMA_XIU | HPCDMA_ETXD)) { 441 i = NEXT_TX(i); 442 td = &sp->tx_desc[i]; 443 dma_sync_desc_cpu(dev, td); 444 } 445 if (td->tdma.cntinfo & HPCDMA_XIU) { 446 hregs->tx_ndptr = VIRT_TO_DMA(sp, td); 447 hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; 448 } 449 } 450 451 static inline void sgiseeq_tx(struct net_device *dev, struct sgiseeq_private *sp, 452 struct hpc3_ethregs *hregs, 453 struct sgiseeq_regs *sregs) 454 { 455 struct sgiseeq_tx_desc *td; 456 unsigned long status = hregs->tx_ctrl; 457 int j; 458 459 tx_maybe_reset_collisions(sp, sregs); 460 461 if (!(status & (HPC3_ETXCTRL_ACTIVE | SEEQ_TSTAT_PTRANS))) { 462 /* Oops, HPC detected some sort of error. */ 463 if (status & SEEQ_TSTAT_R16) 464 dev->stats.tx_aborted_errors++; 465 if (status & SEEQ_TSTAT_UFLOW) 466 dev->stats.tx_fifo_errors++; 467 if (status & SEEQ_TSTAT_LCLS) 468 dev->stats.collisions++; 469 } 470 471 /* Ack 'em... */ 472 for (j = sp->tx_old; j != sp->tx_new; j = NEXT_TX(j)) { 473 td = &sp->tx_desc[j]; 474 475 dma_sync_desc_cpu(dev, td); 476 if (!(td->tdma.cntinfo & (HPCDMA_XIU))) 477 break; 478 if (!(td->tdma.cntinfo & (HPCDMA_ETXD))) { 479 if (!(status & HPC3_ETXCTRL_ACTIVE)) { 480 hregs->tx_ndptr = VIRT_TO_DMA(sp, td); 481 hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; 482 } 483 break; 484 } 485 dev->stats.tx_packets++; 486 sp->tx_old = NEXT_TX(sp->tx_old); 487 td->tdma.cntinfo &= ~(HPCDMA_XIU | HPCDMA_XIE); 488 td->tdma.cntinfo |= HPCDMA_EOX; 489 if (td->skb) { 490 dev_kfree_skb_any(td->skb); 491 td->skb = NULL; 492 } 493 dma_sync_desc_dev(dev, td); 494 } 495 } 496 497 static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id) 498 { 499 struct net_device *dev = (struct net_device *) dev_id; 500 struct sgiseeq_private *sp = netdev_priv(dev); 501 struct hpc3_ethregs *hregs = sp->hregs; 502 struct sgiseeq_regs *sregs = sp->sregs; 503 504 spin_lock(&sp->tx_lock); 505 506 /* Ack the IRQ and set software state. */ 507 hregs->reset = HPC3_ERST_CLRIRQ; 508 509 /* Always check for received packets. */ 510 sgiseeq_rx(dev, sp, hregs, sregs); 511 512 /* Only check for tx acks if we have something queued. */ 513 if (sp->tx_old != sp->tx_new) 514 sgiseeq_tx(dev, sp, hregs, sregs); 515 516 if ((TX_BUFFS_AVAIL(sp) > 0) && netif_queue_stopped(dev)) { 517 netif_wake_queue(dev); 518 } 519 spin_unlock(&sp->tx_lock); 520 521 return IRQ_HANDLED; 522 } 523 524 static int sgiseeq_open(struct net_device *dev) 525 { 526 struct sgiseeq_private *sp = netdev_priv(dev); 527 struct sgiseeq_regs *sregs = sp->sregs; 528 unsigned int irq = dev->irq; 529 int err; 530 531 if (request_irq(irq, sgiseeq_interrupt, 0, sgiseeqstr, dev)) { 532 printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq); 533 return -EAGAIN; 534 } 535 536 err = init_seeq(dev, sp, sregs); 537 if (err) 538 goto out_free_irq; 539 540 netif_start_queue(dev); 541 542 return 0; 543 544 out_free_irq: 545 free_irq(irq, dev); 546 547 return err; 548 } 549 550 static int sgiseeq_close(struct net_device *dev) 551 { 552 struct sgiseeq_private *sp = netdev_priv(dev); 553 struct sgiseeq_regs *sregs = sp->sregs; 554 unsigned int irq = dev->irq; 555 556 netif_stop_queue(dev); 557 558 /* Shutdown the Seeq. */ 559 reset_hpc3_and_seeq(sp->hregs, sregs); 560 free_irq(irq, dev); 561 seeq_purge_ring(dev); 562 563 return 0; 564 } 565 566 static inline int sgiseeq_reset(struct net_device *dev) 567 { 568 struct sgiseeq_private *sp = netdev_priv(dev); 569 struct sgiseeq_regs *sregs = sp->sregs; 570 int err; 571 572 err = init_seeq(dev, sp, sregs); 573 if (err) 574 return err; 575 576 netif_trans_update(dev); /* prevent tx timeout */ 577 netif_wake_queue(dev); 578 579 return 0; 580 } 581 582 static netdev_tx_t 583 sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) 584 { 585 struct sgiseeq_private *sp = netdev_priv(dev); 586 struct hpc3_ethregs *hregs = sp->hregs; 587 unsigned long flags; 588 struct sgiseeq_tx_desc *td; 589 int len, entry; 590 591 spin_lock_irqsave(&sp->tx_lock, flags); 592 593 /* Setup... */ 594 len = skb->len; 595 if (len < ETH_ZLEN) { 596 if (skb_padto(skb, ETH_ZLEN)) { 597 spin_unlock_irqrestore(&sp->tx_lock, flags); 598 return NETDEV_TX_OK; 599 } 600 len = ETH_ZLEN; 601 } 602 603 dev->stats.tx_bytes += len; 604 entry = sp->tx_new; 605 td = &sp->tx_desc[entry]; 606 dma_sync_desc_cpu(dev, td); 607 608 /* Create entry. There are so many races with adding a new 609 * descriptor to the chain: 610 * 1) Assume that the HPC is off processing a DMA chain while 611 * we are changing all of the following. 612 * 2) Do no allow the HPC to look at a new descriptor until 613 * we have completely set up it's state. This means, do 614 * not clear HPCDMA_EOX in the current last descritptor 615 * until the one we are adding looks consistent and could 616 * be processes right now. 617 * 3) The tx interrupt code must notice when we've added a new 618 * entry and the HPC got to the end of the chain before we 619 * added this new entry and restarted it. 620 */ 621 td->skb = skb; 622 td->tdma.pbuf = dma_map_single(dev->dev.parent, skb->data, 623 len, DMA_TO_DEVICE); 624 td->tdma.cntinfo = (len & HPCDMA_BCNT) | 625 HPCDMA_XIU | HPCDMA_EOXP | HPCDMA_XIE | HPCDMA_EOX; 626 dma_sync_desc_dev(dev, td); 627 if (sp->tx_old != sp->tx_new) { 628 struct sgiseeq_tx_desc *backend; 629 630 backend = &sp->tx_desc[PREV_TX(sp->tx_new)]; 631 dma_sync_desc_cpu(dev, backend); 632 backend->tdma.cntinfo &= ~HPCDMA_EOX; 633 dma_sync_desc_dev(dev, backend); 634 } 635 sp->tx_new = NEXT_TX(sp->tx_new); /* Advance. */ 636 637 /* Maybe kick the HPC back into motion. */ 638 if (!(hregs->tx_ctrl & HPC3_ETXCTRL_ACTIVE)) 639 kick_tx(dev, sp, hregs); 640 641 if (!TX_BUFFS_AVAIL(sp)) 642 netif_stop_queue(dev); 643 spin_unlock_irqrestore(&sp->tx_lock, flags); 644 645 return NETDEV_TX_OK; 646 } 647 648 static void timeout(struct net_device *dev) 649 { 650 printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name); 651 sgiseeq_reset(dev); 652 653 netif_trans_update(dev); /* prevent tx timeout */ 654 netif_wake_queue(dev); 655 } 656 657 static void sgiseeq_set_multicast(struct net_device *dev) 658 { 659 struct sgiseeq_private *sp = netdev_priv(dev); 660 unsigned char oldmode = sp->mode; 661 662 if(dev->flags & IFF_PROMISC) 663 sp->mode = SEEQ_RCMD_RANY; 664 else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) 665 sp->mode = SEEQ_RCMD_RBMCAST; 666 else 667 sp->mode = SEEQ_RCMD_RBCAST; 668 669 /* XXX I know this sucks, but is there a better way to reprogram 670 * XXX the receiver? At least, this shouldn't happen too often. 671 */ 672 673 if (oldmode != sp->mode) 674 sgiseeq_reset(dev); 675 } 676 677 static inline void setup_tx_ring(struct net_device *dev, 678 struct sgiseeq_tx_desc *buf, 679 int nbufs) 680 { 681 struct sgiseeq_private *sp = netdev_priv(dev); 682 int i = 0; 683 684 while (i < (nbufs - 1)) { 685 buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); 686 buf[i].tdma.pbuf = 0; 687 dma_sync_desc_dev(dev, &buf[i]); 688 i++; 689 } 690 buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf); 691 dma_sync_desc_dev(dev, &buf[i]); 692 } 693 694 static inline void setup_rx_ring(struct net_device *dev, 695 struct sgiseeq_rx_desc *buf, 696 int nbufs) 697 { 698 struct sgiseeq_private *sp = netdev_priv(dev); 699 int i = 0; 700 701 while (i < (nbufs - 1)) { 702 buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); 703 buf[i].rdma.pbuf = 0; 704 dma_sync_desc_dev(dev, &buf[i]); 705 i++; 706 } 707 buf[i].rdma.pbuf = 0; 708 buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf); 709 dma_sync_desc_dev(dev, &buf[i]); 710 } 711 712 static const struct net_device_ops sgiseeq_netdev_ops = { 713 .ndo_open = sgiseeq_open, 714 .ndo_stop = sgiseeq_close, 715 .ndo_start_xmit = sgiseeq_start_xmit, 716 .ndo_tx_timeout = timeout, 717 .ndo_set_rx_mode = sgiseeq_set_multicast, 718 .ndo_set_mac_address = sgiseeq_set_mac_address, 719 .ndo_validate_addr = eth_validate_addr, 720 }; 721 722 static int sgiseeq_probe(struct platform_device *pdev) 723 { 724 struct sgiseeq_platform_data *pd = dev_get_platdata(&pdev->dev); 725 struct hpc3_regs *hpcregs = pd->hpc; 726 struct sgiseeq_init_block *sr; 727 unsigned int irq = pd->irq; 728 struct sgiseeq_private *sp; 729 struct net_device *dev; 730 int err; 731 732 dev = alloc_etherdev(sizeof (struct sgiseeq_private)); 733 if (!dev) { 734 err = -ENOMEM; 735 goto err_out; 736 } 737 738 platform_set_drvdata(pdev, dev); 739 SET_NETDEV_DEV(dev, &pdev->dev); 740 sp = netdev_priv(dev); 741 742 /* Make private data page aligned */ 743 sr = dma_alloc_attrs(&pdev->dev, sizeof(*sp->srings), &sp->srings_dma, 744 GFP_KERNEL, DMA_ATTR_NON_CONSISTENT); 745 if (!sr) { 746 printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); 747 err = -ENOMEM; 748 goto err_out_free_dev; 749 } 750 sp->srings = sr; 751 sp->rx_desc = sp->srings->rxvector; 752 sp->tx_desc = sp->srings->txvector; 753 spin_lock_init(&sp->tx_lock); 754 755 /* A couple calculations now, saves many cycles later. */ 756 setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS); 757 setup_tx_ring(dev, sp->tx_desc, SEEQ_TX_BUFFERS); 758 759 memcpy(dev->dev_addr, pd->mac, ETH_ALEN); 760 761 #ifdef DEBUG 762 gpriv = sp; 763 gdev = dev; 764 #endif 765 sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; 766 sp->hregs = &hpcregs->ethregs; 767 sp->name = sgiseeqstr; 768 sp->mode = SEEQ_RCMD_RBCAST; 769 770 /* Setup PIO and DMA transfer timing */ 771 sp->hregs->pconfig = 0x161; 772 sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | 773 HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; 774 775 /* Setup PIO and DMA transfer timing */ 776 sp->hregs->pconfig = 0x161; 777 sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | 778 HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; 779 780 /* Reset the chip. */ 781 hpc3_eth_reset(sp->hregs); 782 783 sp->is_edlc = !(sp->sregs->rw.rregs.collision_tx[0] & 0xff); 784 if (sp->is_edlc) 785 sp->control = SEEQ_CTRL_XCNT | SEEQ_CTRL_ACCNT | 786 SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT | 787 SEEQ_CTRL_ENCARR; 788 789 dev->netdev_ops = &sgiseeq_netdev_ops; 790 dev->watchdog_timeo = (200 * HZ) / 1000; 791 dev->irq = irq; 792 793 if (register_netdev(dev)) { 794 printk(KERN_ERR "Sgiseeq: Cannot register net device, " 795 "aborting.\n"); 796 err = -ENODEV; 797 goto err_out_free_page; 798 } 799 800 printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr); 801 802 return 0; 803 804 err_out_free_page: 805 free_page((unsigned long) sp->srings); 806 err_out_free_dev: 807 free_netdev(dev); 808 809 err_out: 810 return err; 811 } 812 813 static int sgiseeq_remove(struct platform_device *pdev) 814 { 815 struct net_device *dev = platform_get_drvdata(pdev); 816 struct sgiseeq_private *sp = netdev_priv(dev); 817 818 unregister_netdev(dev); 819 dma_free_attrs(&pdev->dev, sizeof(*sp->srings), sp->srings, 820 sp->srings_dma, DMA_ATTR_NON_CONSISTENT); 821 free_netdev(dev); 822 823 return 0; 824 } 825 826 static struct platform_driver sgiseeq_driver = { 827 .probe = sgiseeq_probe, 828 .remove = sgiseeq_remove, 829 .driver = { 830 .name = "sgiseeq", 831 } 832 }; 833 834 module_platform_driver(sgiseeq_driver); 835 836 MODULE_DESCRIPTION("SGI Seeq 8003 driver"); 837 MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@linux-mips.org>"); 838 MODULE_LICENSE("GPL"); 839 MODULE_ALIAS("platform:sgiseeq"); 840