1# SPDX-License-Identifier: GPL-2.0-only 2# 3# PPP network device configuration 4# 5 6config PPP 7 tristate "PPP (point-to-point protocol) support" 8 select SLHC 9 ---help--- 10 PPP (Point to Point Protocol) is a newer and better SLIP. It serves 11 the same purpose: sending Internet traffic over telephone (and other 12 serial) lines. Ask your access provider if they support it, because 13 otherwise you can't use it; most Internet access providers these 14 days support PPP rather than SLIP. 15 16 To use PPP, you need an additional program called pppd as described 17 in the PPP-HOWTO, available at 18 <http://www.tldp.org/docs.html#howto>. Make sure that you have 19 the version of pppd recommended in <file:Documentation/Changes>. 20 The PPP option enlarges your kernel by about 16 KB. 21 22 There are actually two versions of PPP: the traditional PPP for 23 asynchronous lines, such as regular analog phone lines, and 24 synchronous PPP which can be used over digital ISDN lines for 25 example. If you want to use PPP over phone lines or other 26 asynchronous serial lines, you need to say Y (or M) here and also to 27 the next option, "PPP support for async serial ports". For PPP over 28 synchronous lines, you should say Y (or M) here and to "Support 29 synchronous PPP", below. 30 31 If you said Y to "Version information on all symbols" above, then 32 you cannot compile the PPP driver into the kernel; you can then only 33 compile it as a module. To compile this driver as a module, choose M 34 here. The module will be called ppp_generic. 35 36if PPP 37 38config PPP_BSDCOMP 39 tristate "PPP BSD-Compress compression" 40 depends on PPP 41 ---help--- 42 Support for the BSD-Compress compression method for PPP, which uses 43 the LZW compression method to compress each PPP packet before it is 44 sent over the wire. The machine at the other end of the PPP link 45 (usually your ISP) has to support the BSD-Compress compression 46 method as well for this to be useful. Even if they don't support it, 47 it is safe to say Y here. 48 49 The PPP Deflate compression method ("PPP Deflate compression", 50 above) is preferable to BSD-Compress, because it compresses better 51 and is patent-free. 52 53 Note that the BSD compression code will always be compiled as a 54 module; it is called bsd_comp and will show up in the directory 55 modules once you have said "make modules". If unsure, say N. 56 57config PPP_DEFLATE 58 tristate "PPP Deflate compression" 59 depends on PPP 60 select ZLIB_INFLATE 61 select ZLIB_DEFLATE 62 ---help--- 63 Support for the Deflate compression method for PPP, which uses the 64 Deflate algorithm (the same algorithm that gzip uses) to compress 65 each PPP packet before it is sent over the wire. The machine at the 66 other end of the PPP link (usually your ISP) has to support the 67 Deflate compression method as well for this to be useful. Even if 68 they don't support it, it is safe to say Y here. 69 70 To compile this driver as a module, choose M here. 71 72config PPP_FILTER 73 bool "PPP filtering" 74 depends on PPP 75 ---help--- 76 Say Y here if you want to be able to filter the packets passing over 77 PPP interfaces. This allows you to control which packets count as 78 activity (i.e. which packets will reset the idle timer or bring up 79 a demand-dialed link) and which packets are to be dropped entirely. 80 You need to say Y here if you wish to use the pass-filter and 81 active-filter options to pppd. 82 83 If unsure, say N. 84 85config PPP_MPPE 86 tristate "PPP MPPE compression (encryption)" 87 depends on PPP 88 select CRYPTO 89 select CRYPTO_SHA1 90 select CRYPTO_ARC4 91 select CRYPTO_ECB 92 ---help--- 93 Support for the MPPE Encryption protocol, as employed by the 94 Microsoft Point-to-Point Tunneling Protocol. 95 96 See http://pptpclient.sourceforge.net/ for information on 97 configuring PPTP clients and servers to utilize this method. 98 99config PPP_MULTILINK 100 bool "PPP multilink support" 101 depends on PPP 102 ---help--- 103 PPP multilink is a protocol (defined in RFC 1990) which allows you 104 to combine several (logical or physical) lines into one logical PPP 105 connection, so that you can utilize your full bandwidth. 106 107 This has to be supported at the other end as well and you need a 108 version of the pppd daemon which understands the multilink protocol. 109 110 If unsure, say N. 111 112config PPPOATM 113 tristate "PPP over ATM" 114 depends on ATM && PPP 115 ---help--- 116 Support PPP (Point to Point Protocol) encapsulated in ATM frames. 117 This implementation does not yet comply with section 8 of RFC2364, 118 which can lead to bad results if the ATM peer loses state and 119 changes its encapsulation unilaterally. 120 121config PPPOE 122 tristate "PPP over Ethernet" 123 depends on PPP 124 ---help--- 125 Support for PPP over Ethernet. 126 127 This driver requires the latest version of pppd from the CVS 128 repository at cvs.samba.org. Alternatively, see the 129 RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) 130 which contains instruction on how to use this driver (under 131 the heading "Kernel mode PPPoE"). 132 133config PPTP 134 tristate "PPP over IPv4 (PPTP)" 135 depends on PPP && NET_IPGRE_DEMUX 136 ---help--- 137 Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) 138 139 This driver requires pppd plugin to work in client mode or 140 modified pptpd (poptop) to work in server mode. 141 See http://accel-pptp.sourceforge.net/ for information how to 142 utilize this module. 143 144config PPPOL2TP 145 tristate "PPP over L2TP" 146 depends on L2TP && PPP 147 ---help--- 148 Support for PPP-over-L2TP socket family. L2TP is a protocol 149 used by ISPs and enterprises to tunnel PPP traffic over UDP 150 tunnels. L2TP is replacing PPTP for VPN uses. 151if TTY 152 153config PPP_ASYNC 154 tristate "PPP support for async serial ports" 155 depends on PPP 156 select CRC_CCITT 157 ---help--- 158 Say Y (or M) here if you want to be able to use PPP over standard 159 asynchronous serial ports, such as COM1 or COM2 on a PC. If you use 160 a modem (not a synchronous or ISDN modem) to contact your ISP, you 161 need this option. 162 163 To compile this driver as a module, choose M here. 164 165 If unsure, say Y. 166 167config PPP_SYNC_TTY 168 tristate "PPP support for sync tty ports" 169 depends on PPP 170 ---help--- 171 Say Y (or M) here if you want to be able to use PPP over synchronous 172 (HDLC) tty devices, such as the SyncLink adapter. These devices 173 are often used for high-speed leased lines like T1/E1. 174 175 To compile this driver as a module, choose M here. 176 177endif # TTY 178 179endif # PPP 180