1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. 6 */ 7 8 #ifndef _WMI_H_ 9 #define _WMI_H_ 10 11 #include <linux/types.h> 12 #include <linux/ieee80211.h> 13 14 /* 15 * This file specifies the WMI interface for the Unified Software 16 * Architecture. 17 * 18 * It includes definitions of all the commands and events. Commands are 19 * messages from the host to the target. Events and Replies are messages 20 * from the target to the host. 21 * 22 * Ownership of correctness in regards to WMI commands belongs to the host 23 * driver and the target is not required to validate parameters for value, 24 * proper range, or any other checking. 25 * 26 * Guidelines for extending this interface are below. 27 * 28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 29 * 30 * 2. Use ONLY u32 type for defining member variables within WMI 31 * command/event structures. Do not use u8, u16, bool or 32 * enum types within these structures. 33 * 34 * 3. DO NOT define bit fields within structures. Implement bit fields 35 * using masks if necessary. Do not use the programming language's bit 36 * field definition. 37 * 38 * 4. Define macros for encode/decode of u8, u16 fields within 39 * the u32 variables. Use these macros for set/get of these fields. 40 * Try to use this to optimize the structure without bloating it with 41 * u32 variables for every lower sized field. 42 * 43 * 5. Do not use PACK/UNPACK attributes for the structures as each member 44 * variable is already 4-byte aligned by virtue of being a u32 45 * type. 46 * 47 * 6. Comment each parameter part of the WMI command/event structure by 48 * using the 2 stars at the beginning of C comment instead of one star to 49 * enable HTML document generation using Doxygen. 50 * 51 */ 52 53 /* Control Path */ 54 struct wmi_cmd_hdr { 55 __le32 cmd_id; 56 } __packed; 57 58 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 59 #define WMI_CMD_HDR_CMD_ID_LSB 0 60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 61 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 62 63 #define HTC_PROTOCOL_VERSION 0x0002 64 #define WMI_PROTOCOL_VERSION 0x0002 65 66 /* 67 * There is no signed version of __le32, so for a temporary solution come 68 * up with our own version. The idea is from fs/ntfs/endian.h. 69 * 70 * Use a_ prefix so that it doesn't conflict if we get proper support to 71 * linux/types.h. 72 */ 73 typedef __s32 __bitwise a_sle32; 74 75 static inline a_sle32 a_cpu_to_sle32(s32 val) 76 { 77 return (__force a_sle32)cpu_to_le32(val); 78 } 79 80 static inline s32 a_sle32_to_cpu(a_sle32 val) 81 { 82 return le32_to_cpu((__force __le32)val); 83 } 84 85 enum wmi_service { 86 WMI_SERVICE_BEACON_OFFLOAD = 0, 87 WMI_SERVICE_SCAN_OFFLOAD, 88 WMI_SERVICE_ROAM_OFFLOAD, 89 WMI_SERVICE_BCN_MISS_OFFLOAD, 90 WMI_SERVICE_STA_PWRSAVE, 91 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 92 WMI_SERVICE_AP_UAPSD, 93 WMI_SERVICE_AP_DFS, 94 WMI_SERVICE_11AC, 95 WMI_SERVICE_BLOCKACK, 96 WMI_SERVICE_PHYERR, 97 WMI_SERVICE_BCN_FILTER, 98 WMI_SERVICE_RTT, 99 WMI_SERVICE_RATECTRL, 100 WMI_SERVICE_WOW, 101 WMI_SERVICE_RATECTRL_CACHE, 102 WMI_SERVICE_IRAM_TIDS, 103 WMI_SERVICE_ARPNS_OFFLOAD, 104 WMI_SERVICE_NLO, 105 WMI_SERVICE_GTK_OFFLOAD, 106 WMI_SERVICE_SCAN_SCH, 107 WMI_SERVICE_CSA_OFFLOAD, 108 WMI_SERVICE_CHATTER, 109 WMI_SERVICE_COEX_FREQAVOID, 110 WMI_SERVICE_PACKET_POWER_SAVE, 111 WMI_SERVICE_FORCE_FW_HANG, 112 WMI_SERVICE_GPIO, 113 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 114 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 115 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 116 WMI_SERVICE_STA_KEEP_ALIVE, 117 WMI_SERVICE_TX_ENCAP, 118 WMI_SERVICE_BURST, 119 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 120 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 121 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 122 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 123 WMI_SERVICE_EARLY_RX, 124 WMI_SERVICE_STA_SMPS, 125 WMI_SERVICE_FWTEST, 126 WMI_SERVICE_STA_WMMAC, 127 WMI_SERVICE_TDLS, 128 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 129 WMI_SERVICE_ADAPTIVE_OCS, 130 WMI_SERVICE_BA_SSN_SUPPORT, 131 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 132 WMI_SERVICE_WLAN_HB, 133 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 134 WMI_SERVICE_BATCH_SCAN, 135 WMI_SERVICE_QPOWER, 136 WMI_SERVICE_PLMREQ, 137 WMI_SERVICE_THERMAL_MGMT, 138 WMI_SERVICE_RMC, 139 WMI_SERVICE_MHF_OFFLOAD, 140 WMI_SERVICE_COEX_SAR, 141 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 142 WMI_SERVICE_NAN, 143 WMI_SERVICE_L1SS_STAT, 144 WMI_SERVICE_ESTIMATE_LINKSPEED, 145 WMI_SERVICE_OBSS_SCAN, 146 WMI_SERVICE_TDLS_OFFCHAN, 147 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 148 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 149 WMI_SERVICE_IBSS_PWRSAVE, 150 WMI_SERVICE_LPASS, 151 WMI_SERVICE_EXTSCAN, 152 WMI_SERVICE_D0WOW, 153 WMI_SERVICE_HSOFFLOAD, 154 WMI_SERVICE_ROAM_HO_OFFLOAD, 155 WMI_SERVICE_RX_FULL_REORDER, 156 WMI_SERVICE_DHCP_OFFLOAD, 157 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 158 WMI_SERVICE_MDNS_OFFLOAD, 159 WMI_SERVICE_SAP_AUTH_OFFLOAD, 160 WMI_SERVICE_ATF, 161 WMI_SERVICE_COEX_GPIO, 162 WMI_SERVICE_ENHANCED_PROXY_STA, 163 WMI_SERVICE_TT, 164 WMI_SERVICE_PEER_CACHING, 165 WMI_SERVICE_AUX_SPECTRAL_INTF, 166 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 167 WMI_SERVICE_BSS_CHANNEL_INFO_64, 168 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 169 WMI_SERVICE_MESH_11S, 170 WMI_SERVICE_MESH_NON_11S, 171 WMI_SERVICE_PEER_STATS, 172 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 173 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 174 WMI_SERVICE_TX_MODE_PUSH_ONLY, 175 WMI_SERVICE_TX_MODE_PUSH_PULL, 176 WMI_SERVICE_TX_MODE_DYNAMIC, 177 WMI_SERVICE_VDEV_RX_FILTER, 178 WMI_SERVICE_BTCOEX, 179 WMI_SERVICE_CHECK_CAL_VERSION, 180 WMI_SERVICE_DBGLOG_WARN2, 181 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 182 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 183 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 184 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 185 WMI_SERVICE_SMART_LOGGING_SUPPORT, 186 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 187 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 188 WMI_SERVICE_MGMT_TX_WMI, 189 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 190 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 191 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 192 WMI_SERVICE_TPC_STATS_FINAL, 193 WMI_SERVICE_RESET_CHIP, 194 WMI_SERVICE_SPOOF_MAC_SUPPORT, 195 WMI_SERVICE_TX_DATA_ACK_RSSI, 196 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 197 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 198 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, 199 WMI_SERVICE_THERM_THROT, 200 WMI_SERVICE_RTT_RESPONDER_ROLE, 201 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, 202 WMI_SERVICE_REPORT_AIRTIME, 203 WMI_SERVICE_SYNC_DELETE_CMDS, 204 WMI_SERVICE_TX_PWR_PER_PEER, 205 206 /* Remember to add the new value to wmi_service_name()! */ 207 208 /* keep last */ 209 WMI_SERVICE_MAX, 210 }; 211 212 enum wmi_10x_service { 213 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 214 WMI_10X_SERVICE_SCAN_OFFLOAD, 215 WMI_10X_SERVICE_ROAM_OFFLOAD, 216 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 217 WMI_10X_SERVICE_STA_PWRSAVE, 218 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 219 WMI_10X_SERVICE_AP_UAPSD, 220 WMI_10X_SERVICE_AP_DFS, 221 WMI_10X_SERVICE_11AC, 222 WMI_10X_SERVICE_BLOCKACK, 223 WMI_10X_SERVICE_PHYERR, 224 WMI_10X_SERVICE_BCN_FILTER, 225 WMI_10X_SERVICE_RTT, 226 WMI_10X_SERVICE_RATECTRL, 227 WMI_10X_SERVICE_WOW, 228 WMI_10X_SERVICE_RATECTRL_CACHE, 229 WMI_10X_SERVICE_IRAM_TIDS, 230 WMI_10X_SERVICE_BURST, 231 232 /* introduced in 10.2 */ 233 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 234 WMI_10X_SERVICE_FORCE_FW_HANG, 235 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 236 WMI_10X_SERVICE_ATF, 237 WMI_10X_SERVICE_COEX_GPIO, 238 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 239 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 240 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 241 WMI_10X_SERVICE_MESH, 242 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 243 WMI_10X_SERVICE_PEER_STATS, 244 WMI_10X_SERVICE_RESET_CHIP, 245 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 246 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, 247 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 248 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 249 }; 250 251 enum wmi_main_service { 252 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 253 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 254 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 255 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 256 WMI_MAIN_SERVICE_STA_PWRSAVE, 257 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 258 WMI_MAIN_SERVICE_AP_UAPSD, 259 WMI_MAIN_SERVICE_AP_DFS, 260 WMI_MAIN_SERVICE_11AC, 261 WMI_MAIN_SERVICE_BLOCKACK, 262 WMI_MAIN_SERVICE_PHYERR, 263 WMI_MAIN_SERVICE_BCN_FILTER, 264 WMI_MAIN_SERVICE_RTT, 265 WMI_MAIN_SERVICE_RATECTRL, 266 WMI_MAIN_SERVICE_WOW, 267 WMI_MAIN_SERVICE_RATECTRL_CACHE, 268 WMI_MAIN_SERVICE_IRAM_TIDS, 269 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 270 WMI_MAIN_SERVICE_NLO, 271 WMI_MAIN_SERVICE_GTK_OFFLOAD, 272 WMI_MAIN_SERVICE_SCAN_SCH, 273 WMI_MAIN_SERVICE_CSA_OFFLOAD, 274 WMI_MAIN_SERVICE_CHATTER, 275 WMI_MAIN_SERVICE_COEX_FREQAVOID, 276 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 277 WMI_MAIN_SERVICE_FORCE_FW_HANG, 278 WMI_MAIN_SERVICE_GPIO, 279 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 280 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 281 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 282 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 283 WMI_MAIN_SERVICE_TX_ENCAP, 284 }; 285 286 enum wmi_10_4_service { 287 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 288 WMI_10_4_SERVICE_SCAN_OFFLOAD, 289 WMI_10_4_SERVICE_ROAM_OFFLOAD, 290 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 291 WMI_10_4_SERVICE_STA_PWRSAVE, 292 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 293 WMI_10_4_SERVICE_AP_UAPSD, 294 WMI_10_4_SERVICE_AP_DFS, 295 WMI_10_4_SERVICE_11AC, 296 WMI_10_4_SERVICE_BLOCKACK, 297 WMI_10_4_SERVICE_PHYERR, 298 WMI_10_4_SERVICE_BCN_FILTER, 299 WMI_10_4_SERVICE_RTT, 300 WMI_10_4_SERVICE_RATECTRL, 301 WMI_10_4_SERVICE_WOW, 302 WMI_10_4_SERVICE_RATECTRL_CACHE, 303 WMI_10_4_SERVICE_IRAM_TIDS, 304 WMI_10_4_SERVICE_BURST, 305 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 306 WMI_10_4_SERVICE_GTK_OFFLOAD, 307 WMI_10_4_SERVICE_SCAN_SCH, 308 WMI_10_4_SERVICE_CSA_OFFLOAD, 309 WMI_10_4_SERVICE_CHATTER, 310 WMI_10_4_SERVICE_COEX_FREQAVOID, 311 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 312 WMI_10_4_SERVICE_FORCE_FW_HANG, 313 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 314 WMI_10_4_SERVICE_GPIO, 315 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 316 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 317 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 318 WMI_10_4_SERVICE_TX_ENCAP, 319 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 320 WMI_10_4_SERVICE_EARLY_RX, 321 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 322 WMI_10_4_SERVICE_TT, 323 WMI_10_4_SERVICE_ATF, 324 WMI_10_4_SERVICE_PEER_CACHING, 325 WMI_10_4_SERVICE_COEX_GPIO, 326 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 327 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 328 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 329 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 330 WMI_10_4_SERVICE_MESH_NON_11S, 331 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 332 WMI_10_4_SERVICE_PEER_STATS, 333 WMI_10_4_SERVICE_MESH_11S, 334 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 335 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 336 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 337 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 338 WMI_10_4_SERVICE_VDEV_RX_FILTER, 339 WMI_10_4_SERVICE_BTCOEX, 340 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 341 WMI_10_4_SERVICE_DBGLOG_WARN2, 342 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 343 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 344 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 345 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 346 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 347 WMI_10_4_SERVICE_TDLS, 348 WMI_10_4_SERVICE_TDLS_OFFCHAN, 349 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 350 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 351 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 352 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 353 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 354 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 355 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 356 WMI_10_4_SERVICE_TPC_STATS_FINAL, 357 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, 358 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 359 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, 360 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 361 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 362 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, 363 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 364 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, 365 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, 366 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 367 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, 368 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, 369 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 370 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 371 WMI_10_4_SERVICE_REPORT_AIRTIME, 372 WMI_10_4_SERVICE_TX_PWR_PER_PEER, 373 }; 374 375 static inline char *wmi_service_name(enum wmi_service service_id) 376 { 377 #define SVCSTR(x) case x: return #x 378 379 switch (service_id) { 380 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 381 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 382 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 383 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 384 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 385 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 386 SVCSTR(WMI_SERVICE_AP_UAPSD); 387 SVCSTR(WMI_SERVICE_AP_DFS); 388 SVCSTR(WMI_SERVICE_11AC); 389 SVCSTR(WMI_SERVICE_BLOCKACK); 390 SVCSTR(WMI_SERVICE_PHYERR); 391 SVCSTR(WMI_SERVICE_BCN_FILTER); 392 SVCSTR(WMI_SERVICE_RTT); 393 SVCSTR(WMI_SERVICE_RATECTRL); 394 SVCSTR(WMI_SERVICE_WOW); 395 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 396 SVCSTR(WMI_SERVICE_IRAM_TIDS); 397 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 398 SVCSTR(WMI_SERVICE_NLO); 399 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 400 SVCSTR(WMI_SERVICE_SCAN_SCH); 401 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 402 SVCSTR(WMI_SERVICE_CHATTER); 403 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 404 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 405 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 406 SVCSTR(WMI_SERVICE_GPIO); 407 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 408 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 409 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 410 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 411 SVCSTR(WMI_SERVICE_TX_ENCAP); 412 SVCSTR(WMI_SERVICE_BURST); 413 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 414 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 415 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 416 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 417 SVCSTR(WMI_SERVICE_EARLY_RX); 418 SVCSTR(WMI_SERVICE_STA_SMPS); 419 SVCSTR(WMI_SERVICE_FWTEST); 420 SVCSTR(WMI_SERVICE_STA_WMMAC); 421 SVCSTR(WMI_SERVICE_TDLS); 422 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 423 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 424 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 425 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 426 SVCSTR(WMI_SERVICE_WLAN_HB); 427 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 428 SVCSTR(WMI_SERVICE_BATCH_SCAN); 429 SVCSTR(WMI_SERVICE_QPOWER); 430 SVCSTR(WMI_SERVICE_PLMREQ); 431 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 432 SVCSTR(WMI_SERVICE_RMC); 433 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 434 SVCSTR(WMI_SERVICE_COEX_SAR); 435 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 436 SVCSTR(WMI_SERVICE_NAN); 437 SVCSTR(WMI_SERVICE_L1SS_STAT); 438 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 439 SVCSTR(WMI_SERVICE_OBSS_SCAN); 440 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 441 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 442 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 443 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 444 SVCSTR(WMI_SERVICE_LPASS); 445 SVCSTR(WMI_SERVICE_EXTSCAN); 446 SVCSTR(WMI_SERVICE_D0WOW); 447 SVCSTR(WMI_SERVICE_HSOFFLOAD); 448 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 449 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 450 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 451 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 452 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 453 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 454 SVCSTR(WMI_SERVICE_ATF); 455 SVCSTR(WMI_SERVICE_COEX_GPIO); 456 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 457 SVCSTR(WMI_SERVICE_TT); 458 SVCSTR(WMI_SERVICE_PEER_CACHING); 459 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 460 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 461 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 462 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 463 SVCSTR(WMI_SERVICE_MESH_11S); 464 SVCSTR(WMI_SERVICE_MESH_NON_11S); 465 SVCSTR(WMI_SERVICE_PEER_STATS); 466 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 467 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 468 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 469 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 470 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 471 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 472 SVCSTR(WMI_SERVICE_BTCOEX); 473 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 474 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 475 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 476 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 477 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 478 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 479 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 480 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 481 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 482 SVCSTR(WMI_SERVICE_MGMT_TX_WMI); 483 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 484 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 485 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 486 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 487 SVCSTR(WMI_SERVICE_RESET_CHIP); 488 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); 489 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); 490 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); 491 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); 492 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); 493 SVCSTR(WMI_SERVICE_THERM_THROT); 494 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); 495 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); 496 SVCSTR(WMI_SERVICE_REPORT_AIRTIME); 497 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS); 498 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER); 499 500 case WMI_SERVICE_MAX: 501 return NULL; 502 } 503 504 #undef SVCSTR 505 506 return NULL; 507 } 508 509 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 510 ((svc_id) < (len) && \ 511 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 512 BIT((svc_id) % (sizeof(u32)))) 513 514 /* This extension is required to accommodate new services, current limit 515 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 516 * wmi_service word. Extending this to make use of remaining unused bits 517 * for new services. 518 */ 519 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 520 ((svc_id) >= (len) && \ 521 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 522 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 523 524 #define SVCMAP(x, y, len) \ 525 do { \ 526 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 527 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 528 __set_bit(y, out); \ 529 } while (0) 530 531 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 532 size_t len) 533 { 534 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 535 WMI_SERVICE_BEACON_OFFLOAD, len); 536 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 537 WMI_SERVICE_SCAN_OFFLOAD, len); 538 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 539 WMI_SERVICE_ROAM_OFFLOAD, len); 540 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 541 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 542 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 543 WMI_SERVICE_STA_PWRSAVE, len); 544 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 545 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 546 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 547 WMI_SERVICE_AP_UAPSD, len); 548 SVCMAP(WMI_10X_SERVICE_AP_DFS, 549 WMI_SERVICE_AP_DFS, len); 550 SVCMAP(WMI_10X_SERVICE_11AC, 551 WMI_SERVICE_11AC, len); 552 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 553 WMI_SERVICE_BLOCKACK, len); 554 SVCMAP(WMI_10X_SERVICE_PHYERR, 555 WMI_SERVICE_PHYERR, len); 556 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 557 WMI_SERVICE_BCN_FILTER, len); 558 SVCMAP(WMI_10X_SERVICE_RTT, 559 WMI_SERVICE_RTT, len); 560 SVCMAP(WMI_10X_SERVICE_RATECTRL, 561 WMI_SERVICE_RATECTRL, len); 562 SVCMAP(WMI_10X_SERVICE_WOW, 563 WMI_SERVICE_WOW, len); 564 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 565 WMI_SERVICE_RATECTRL_CACHE, len); 566 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 567 WMI_SERVICE_IRAM_TIDS, len); 568 SVCMAP(WMI_10X_SERVICE_BURST, 569 WMI_SERVICE_BURST, len); 570 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 571 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 572 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 573 WMI_SERVICE_FORCE_FW_HANG, len); 574 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 575 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 576 SVCMAP(WMI_10X_SERVICE_ATF, 577 WMI_SERVICE_ATF, len); 578 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 579 WMI_SERVICE_COEX_GPIO, len); 580 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 581 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 582 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 583 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 584 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 585 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 586 SVCMAP(WMI_10X_SERVICE_MESH, 587 WMI_SERVICE_MESH_11S, len); 588 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 589 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 590 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 591 WMI_SERVICE_PEER_STATS, len); 592 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 593 WMI_SERVICE_RESET_CHIP, len); 594 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 595 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 596 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 597 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); 598 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 599 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 600 } 601 602 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 603 size_t len) 604 { 605 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 606 WMI_SERVICE_BEACON_OFFLOAD, len); 607 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 608 WMI_SERVICE_SCAN_OFFLOAD, len); 609 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 610 WMI_SERVICE_ROAM_OFFLOAD, len); 611 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 612 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 613 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 614 WMI_SERVICE_STA_PWRSAVE, len); 615 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 616 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 617 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 618 WMI_SERVICE_AP_UAPSD, len); 619 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 620 WMI_SERVICE_AP_DFS, len); 621 SVCMAP(WMI_MAIN_SERVICE_11AC, 622 WMI_SERVICE_11AC, len); 623 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 624 WMI_SERVICE_BLOCKACK, len); 625 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 626 WMI_SERVICE_PHYERR, len); 627 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 628 WMI_SERVICE_BCN_FILTER, len); 629 SVCMAP(WMI_MAIN_SERVICE_RTT, 630 WMI_SERVICE_RTT, len); 631 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 632 WMI_SERVICE_RATECTRL, len); 633 SVCMAP(WMI_MAIN_SERVICE_WOW, 634 WMI_SERVICE_WOW, len); 635 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 636 WMI_SERVICE_RATECTRL_CACHE, len); 637 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 638 WMI_SERVICE_IRAM_TIDS, len); 639 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 640 WMI_SERVICE_ARPNS_OFFLOAD, len); 641 SVCMAP(WMI_MAIN_SERVICE_NLO, 642 WMI_SERVICE_NLO, len); 643 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 644 WMI_SERVICE_GTK_OFFLOAD, len); 645 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 646 WMI_SERVICE_SCAN_SCH, len); 647 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 648 WMI_SERVICE_CSA_OFFLOAD, len); 649 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 650 WMI_SERVICE_CHATTER, len); 651 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 652 WMI_SERVICE_COEX_FREQAVOID, len); 653 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 654 WMI_SERVICE_PACKET_POWER_SAVE, len); 655 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 656 WMI_SERVICE_FORCE_FW_HANG, len); 657 SVCMAP(WMI_MAIN_SERVICE_GPIO, 658 WMI_SERVICE_GPIO, len); 659 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 660 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 661 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 662 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 663 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 664 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 665 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 666 WMI_SERVICE_STA_KEEP_ALIVE, len); 667 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 668 WMI_SERVICE_TX_ENCAP, len); 669 } 670 671 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 672 size_t len) 673 { 674 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 675 WMI_SERVICE_BEACON_OFFLOAD, len); 676 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 677 WMI_SERVICE_SCAN_OFFLOAD, len); 678 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 679 WMI_SERVICE_ROAM_OFFLOAD, len); 680 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 681 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 682 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 683 WMI_SERVICE_STA_PWRSAVE, len); 684 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 685 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 686 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 687 WMI_SERVICE_AP_UAPSD, len); 688 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 689 WMI_SERVICE_AP_DFS, len); 690 SVCMAP(WMI_10_4_SERVICE_11AC, 691 WMI_SERVICE_11AC, len); 692 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 693 WMI_SERVICE_BLOCKACK, len); 694 SVCMAP(WMI_10_4_SERVICE_PHYERR, 695 WMI_SERVICE_PHYERR, len); 696 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 697 WMI_SERVICE_BCN_FILTER, len); 698 SVCMAP(WMI_10_4_SERVICE_RTT, 699 WMI_SERVICE_RTT, len); 700 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 701 WMI_SERVICE_RATECTRL, len); 702 SVCMAP(WMI_10_4_SERVICE_WOW, 703 WMI_SERVICE_WOW, len); 704 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 705 WMI_SERVICE_RATECTRL_CACHE, len); 706 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 707 WMI_SERVICE_IRAM_TIDS, len); 708 SVCMAP(WMI_10_4_SERVICE_BURST, 709 WMI_SERVICE_BURST, len); 710 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 711 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 712 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 713 WMI_SERVICE_GTK_OFFLOAD, len); 714 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 715 WMI_SERVICE_SCAN_SCH, len); 716 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 717 WMI_SERVICE_CSA_OFFLOAD, len); 718 SVCMAP(WMI_10_4_SERVICE_CHATTER, 719 WMI_SERVICE_CHATTER, len); 720 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 721 WMI_SERVICE_COEX_FREQAVOID, len); 722 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 723 WMI_SERVICE_PACKET_POWER_SAVE, len); 724 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 725 WMI_SERVICE_FORCE_FW_HANG, len); 726 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 727 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 728 SVCMAP(WMI_10_4_SERVICE_GPIO, 729 WMI_SERVICE_GPIO, len); 730 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 731 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 732 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 733 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 734 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 735 WMI_SERVICE_STA_KEEP_ALIVE, len); 736 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 737 WMI_SERVICE_TX_ENCAP, len); 738 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 739 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 740 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 741 WMI_SERVICE_EARLY_RX, len); 742 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 743 WMI_SERVICE_ENHANCED_PROXY_STA, len); 744 SVCMAP(WMI_10_4_SERVICE_TT, 745 WMI_SERVICE_TT, len); 746 SVCMAP(WMI_10_4_SERVICE_ATF, 747 WMI_SERVICE_ATF, len); 748 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 749 WMI_SERVICE_PEER_CACHING, len); 750 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 751 WMI_SERVICE_COEX_GPIO, len); 752 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 753 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 754 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 755 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 756 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 757 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 758 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 759 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 760 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 761 WMI_SERVICE_MESH_NON_11S, len); 762 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 763 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 764 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 765 WMI_SERVICE_PEER_STATS, len); 766 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 767 WMI_SERVICE_MESH_11S, len); 768 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 769 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 770 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 771 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 772 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 773 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 774 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 775 WMI_SERVICE_TX_MODE_DYNAMIC, len); 776 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 777 WMI_SERVICE_VDEV_RX_FILTER, len); 778 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 779 WMI_SERVICE_BTCOEX, len); 780 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 781 WMI_SERVICE_CHECK_CAL_VERSION, len); 782 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 783 WMI_SERVICE_DBGLOG_WARN2, len); 784 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 785 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 786 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 787 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 788 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 789 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 790 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 791 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 792 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 793 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 794 SVCMAP(WMI_10_4_SERVICE_TDLS, 795 WMI_SERVICE_TDLS, len); 796 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 797 WMI_SERVICE_TDLS_OFFCHAN, len); 798 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 799 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 800 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 801 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 802 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 803 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 804 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 805 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 806 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 807 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 808 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 809 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 810 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 811 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 812 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 813 WMI_SERVICE_TPC_STATS_FINAL, len); 814 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 815 WMI_SERVICE_TX_DATA_ACK_RSSI, len); 816 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 817 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); 818 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 819 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); 820 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 821 WMI_SERVICE_RTT_RESPONDER_ROLE, len); 822 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 823 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 824 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, 825 WMI_SERVICE_REPORT_AIRTIME, len); 826 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER, 827 WMI_SERVICE_TX_PWR_PER_PEER, len); 828 } 829 830 #undef SVCMAP 831 832 /* 2 word representation of MAC addr */ 833 struct wmi_mac_addr { 834 union { 835 u8 addr[6]; 836 struct { 837 u32 word0; 838 u32 word1; 839 } __packed; 840 } __packed; 841 } __packed; 842 843 struct wmi_cmd_map { 844 u32 init_cmdid; 845 u32 start_scan_cmdid; 846 u32 stop_scan_cmdid; 847 u32 scan_chan_list_cmdid; 848 u32 scan_sch_prio_tbl_cmdid; 849 u32 scan_prob_req_oui_cmdid; 850 u32 pdev_set_regdomain_cmdid; 851 u32 pdev_set_channel_cmdid; 852 u32 pdev_set_param_cmdid; 853 u32 pdev_pktlog_enable_cmdid; 854 u32 pdev_pktlog_disable_cmdid; 855 u32 pdev_set_wmm_params_cmdid; 856 u32 pdev_set_ht_cap_ie_cmdid; 857 u32 pdev_set_vht_cap_ie_cmdid; 858 u32 pdev_set_dscp_tid_map_cmdid; 859 u32 pdev_set_quiet_mode_cmdid; 860 u32 pdev_green_ap_ps_enable_cmdid; 861 u32 pdev_get_tpc_config_cmdid; 862 u32 pdev_set_base_macaddr_cmdid; 863 u32 vdev_create_cmdid; 864 u32 vdev_delete_cmdid; 865 u32 vdev_start_request_cmdid; 866 u32 vdev_restart_request_cmdid; 867 u32 vdev_up_cmdid; 868 u32 vdev_stop_cmdid; 869 u32 vdev_down_cmdid; 870 u32 vdev_set_param_cmdid; 871 u32 vdev_install_key_cmdid; 872 u32 peer_create_cmdid; 873 u32 peer_delete_cmdid; 874 u32 peer_flush_tids_cmdid; 875 u32 peer_set_param_cmdid; 876 u32 peer_assoc_cmdid; 877 u32 peer_add_wds_entry_cmdid; 878 u32 peer_remove_wds_entry_cmdid; 879 u32 peer_mcast_group_cmdid; 880 u32 bcn_tx_cmdid; 881 u32 pdev_send_bcn_cmdid; 882 u32 bcn_tmpl_cmdid; 883 u32 bcn_filter_rx_cmdid; 884 u32 prb_req_filter_rx_cmdid; 885 u32 mgmt_tx_cmdid; 886 u32 mgmt_tx_send_cmdid; 887 u32 prb_tmpl_cmdid; 888 u32 addba_clear_resp_cmdid; 889 u32 addba_send_cmdid; 890 u32 addba_status_cmdid; 891 u32 delba_send_cmdid; 892 u32 addba_set_resp_cmdid; 893 u32 send_singleamsdu_cmdid; 894 u32 sta_powersave_mode_cmdid; 895 u32 sta_powersave_param_cmdid; 896 u32 sta_mimo_ps_mode_cmdid; 897 u32 pdev_dfs_enable_cmdid; 898 u32 pdev_dfs_disable_cmdid; 899 u32 roam_scan_mode; 900 u32 roam_scan_rssi_threshold; 901 u32 roam_scan_period; 902 u32 roam_scan_rssi_change_threshold; 903 u32 roam_ap_profile; 904 u32 ofl_scan_add_ap_profile; 905 u32 ofl_scan_remove_ap_profile; 906 u32 ofl_scan_period; 907 u32 p2p_dev_set_device_info; 908 u32 p2p_dev_set_discoverability; 909 u32 p2p_go_set_beacon_ie; 910 u32 p2p_go_set_probe_resp_ie; 911 u32 p2p_set_vendor_ie_data_cmdid; 912 u32 ap_ps_peer_param_cmdid; 913 u32 ap_ps_peer_uapsd_coex_cmdid; 914 u32 peer_rate_retry_sched_cmdid; 915 u32 wlan_profile_trigger_cmdid; 916 u32 wlan_profile_set_hist_intvl_cmdid; 917 u32 wlan_profile_get_profile_data_cmdid; 918 u32 wlan_profile_enable_profile_id_cmdid; 919 u32 wlan_profile_list_profile_id_cmdid; 920 u32 pdev_suspend_cmdid; 921 u32 pdev_resume_cmdid; 922 u32 add_bcn_filter_cmdid; 923 u32 rmv_bcn_filter_cmdid; 924 u32 wow_add_wake_pattern_cmdid; 925 u32 wow_del_wake_pattern_cmdid; 926 u32 wow_enable_disable_wake_event_cmdid; 927 u32 wow_enable_cmdid; 928 u32 wow_hostwakeup_from_sleep_cmdid; 929 u32 rtt_measreq_cmdid; 930 u32 rtt_tsf_cmdid; 931 u32 vdev_spectral_scan_configure_cmdid; 932 u32 vdev_spectral_scan_enable_cmdid; 933 u32 request_stats_cmdid; 934 u32 set_arp_ns_offload_cmdid; 935 u32 network_list_offload_config_cmdid; 936 u32 gtk_offload_cmdid; 937 u32 csa_offload_enable_cmdid; 938 u32 csa_offload_chanswitch_cmdid; 939 u32 chatter_set_mode_cmdid; 940 u32 peer_tid_addba_cmdid; 941 u32 peer_tid_delba_cmdid; 942 u32 sta_dtim_ps_method_cmdid; 943 u32 sta_uapsd_auto_trig_cmdid; 944 u32 sta_keepalive_cmd; 945 u32 echo_cmdid; 946 u32 pdev_utf_cmdid; 947 u32 dbglog_cfg_cmdid; 948 u32 pdev_qvit_cmdid; 949 u32 pdev_ftm_intg_cmdid; 950 u32 vdev_set_keepalive_cmdid; 951 u32 vdev_get_keepalive_cmdid; 952 u32 force_fw_hang_cmdid; 953 u32 gpio_config_cmdid; 954 u32 gpio_output_cmdid; 955 u32 pdev_get_temperature_cmdid; 956 u32 vdev_set_wmm_params_cmdid; 957 u32 tdls_set_state_cmdid; 958 u32 tdls_peer_update_cmdid; 959 u32 adaptive_qcs_cmdid; 960 u32 scan_update_request_cmdid; 961 u32 vdev_standby_response_cmdid; 962 u32 vdev_resume_response_cmdid; 963 u32 wlan_peer_caching_add_peer_cmdid; 964 u32 wlan_peer_caching_evict_peer_cmdid; 965 u32 wlan_peer_caching_restore_peer_cmdid; 966 u32 wlan_peer_caching_print_all_peers_info_cmdid; 967 u32 peer_update_wds_entry_cmdid; 968 u32 peer_add_proxy_sta_entry_cmdid; 969 u32 rtt_keepalive_cmdid; 970 u32 oem_req_cmdid; 971 u32 nan_cmdid; 972 u32 vdev_ratemask_cmdid; 973 u32 qboost_cfg_cmdid; 974 u32 pdev_smart_ant_enable_cmdid; 975 u32 pdev_smart_ant_set_rx_antenna_cmdid; 976 u32 peer_smart_ant_set_tx_antenna_cmdid; 977 u32 peer_smart_ant_set_train_info_cmdid; 978 u32 peer_smart_ant_set_node_config_ops_cmdid; 979 u32 pdev_set_antenna_switch_table_cmdid; 980 u32 pdev_set_ctl_table_cmdid; 981 u32 pdev_set_mimogain_table_cmdid; 982 u32 pdev_ratepwr_table_cmdid; 983 u32 pdev_ratepwr_chainmsk_table_cmdid; 984 u32 pdev_fips_cmdid; 985 u32 tt_set_conf_cmdid; 986 u32 fwtest_cmdid; 987 u32 vdev_atf_request_cmdid; 988 u32 peer_atf_request_cmdid; 989 u32 pdev_get_ani_cck_config_cmdid; 990 u32 pdev_get_ani_ofdm_config_cmdid; 991 u32 pdev_reserve_ast_entry_cmdid; 992 u32 pdev_get_nfcal_power_cmdid; 993 u32 pdev_get_tpc_cmdid; 994 u32 pdev_get_ast_info_cmdid; 995 u32 vdev_set_dscp_tid_map_cmdid; 996 u32 pdev_get_info_cmdid; 997 u32 vdev_get_info_cmdid; 998 u32 vdev_filter_neighbor_rx_packets_cmdid; 999 u32 mu_cal_start_cmdid; 1000 u32 set_cca_params_cmdid; 1001 u32 pdev_bss_chan_info_request_cmdid; 1002 u32 pdev_enable_adaptive_cca_cmdid; 1003 u32 ext_resource_cfg_cmdid; 1004 u32 vdev_set_ie_cmdid; 1005 u32 set_lteu_config_cmdid; 1006 u32 atf_ssid_grouping_request_cmdid; 1007 u32 peer_atf_ext_request_cmdid; 1008 u32 set_periodic_channel_stats_cfg_cmdid; 1009 u32 peer_bwf_request_cmdid; 1010 u32 btcoex_cfg_cmdid; 1011 u32 peer_tx_mu_txmit_count_cmdid; 1012 u32 peer_tx_mu_txmit_rstcnt_cmdid; 1013 u32 peer_gid_userpos_list_cmdid; 1014 u32 pdev_check_cal_version_cmdid; 1015 u32 coex_version_cfg_cmid; 1016 u32 pdev_get_rx_filter_cmdid; 1017 u32 pdev_extended_nss_cfg_cmdid; 1018 u32 vdev_set_scan_nac_rssi_cmdid; 1019 u32 prog_gpio_band_select_cmdid; 1020 u32 config_smart_logging_cmdid; 1021 u32 debug_fatal_condition_cmdid; 1022 u32 get_tsf_timer_cmdid; 1023 u32 pdev_get_tpc_table_cmdid; 1024 u32 vdev_sifs_trigger_time_cmdid; 1025 u32 pdev_wds_entry_list_cmdid; 1026 u32 tdls_set_offchan_mode_cmdid; 1027 u32 radar_found_cmdid; 1028 u32 set_bb_timing_cmdid; 1029 }; 1030 1031 /* 1032 * wmi command groups. 1033 */ 1034 enum wmi_cmd_group { 1035 /* 0 to 2 are reserved */ 1036 WMI_GRP_START = 0x3, 1037 WMI_GRP_SCAN = WMI_GRP_START, 1038 WMI_GRP_PDEV, 1039 WMI_GRP_VDEV, 1040 WMI_GRP_PEER, 1041 WMI_GRP_MGMT, 1042 WMI_GRP_BA_NEG, 1043 WMI_GRP_STA_PS, 1044 WMI_GRP_DFS, 1045 WMI_GRP_ROAM, 1046 WMI_GRP_OFL_SCAN, 1047 WMI_GRP_P2P, 1048 WMI_GRP_AP_PS, 1049 WMI_GRP_RATE_CTRL, 1050 WMI_GRP_PROFILE, 1051 WMI_GRP_SUSPEND, 1052 WMI_GRP_BCN_FILTER, 1053 WMI_GRP_WOW, 1054 WMI_GRP_RTT, 1055 WMI_GRP_SPECTRAL, 1056 WMI_GRP_STATS, 1057 WMI_GRP_ARP_NS_OFL, 1058 WMI_GRP_NLO_OFL, 1059 WMI_GRP_GTK_OFL, 1060 WMI_GRP_CSA_OFL, 1061 WMI_GRP_CHATTER, 1062 WMI_GRP_TID_ADDBA, 1063 WMI_GRP_MISC, 1064 WMI_GRP_GPIO, 1065 }; 1066 1067 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1068 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1069 1070 #define WMI_CMD_UNSUPPORTED 0 1071 1072 /* Command IDs and command events for MAIN FW. */ 1073 enum wmi_cmd_id { 1074 WMI_INIT_CMDID = 0x1, 1075 1076 /* Scan specific commands */ 1077 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1078 WMI_STOP_SCAN_CMDID, 1079 WMI_SCAN_CHAN_LIST_CMDID, 1080 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1081 1082 /* PDEV (physical device) specific commands */ 1083 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1084 WMI_PDEV_SET_CHANNEL_CMDID, 1085 WMI_PDEV_SET_PARAM_CMDID, 1086 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1087 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1088 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1089 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1090 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1091 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1092 WMI_PDEV_SET_QUIET_MODE_CMDID, 1093 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1094 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1095 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1096 1097 /* VDEV (virtual device) specific commands */ 1098 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1099 WMI_VDEV_DELETE_CMDID, 1100 WMI_VDEV_START_REQUEST_CMDID, 1101 WMI_VDEV_RESTART_REQUEST_CMDID, 1102 WMI_VDEV_UP_CMDID, 1103 WMI_VDEV_STOP_CMDID, 1104 WMI_VDEV_DOWN_CMDID, 1105 WMI_VDEV_SET_PARAM_CMDID, 1106 WMI_VDEV_INSTALL_KEY_CMDID, 1107 1108 /* peer specific commands */ 1109 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1110 WMI_PEER_DELETE_CMDID, 1111 WMI_PEER_FLUSH_TIDS_CMDID, 1112 WMI_PEER_SET_PARAM_CMDID, 1113 WMI_PEER_ASSOC_CMDID, 1114 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1115 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1116 WMI_PEER_MCAST_GROUP_CMDID, 1117 1118 /* beacon/management specific commands */ 1119 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1120 WMI_PDEV_SEND_BCN_CMDID, 1121 WMI_BCN_TMPL_CMDID, 1122 WMI_BCN_FILTER_RX_CMDID, 1123 WMI_PRB_REQ_FILTER_RX_CMDID, 1124 WMI_MGMT_TX_CMDID, 1125 WMI_PRB_TMPL_CMDID, 1126 1127 /* commands to directly control BA negotiation directly from host. */ 1128 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1129 WMI_ADDBA_SEND_CMDID, 1130 WMI_ADDBA_STATUS_CMDID, 1131 WMI_DELBA_SEND_CMDID, 1132 WMI_ADDBA_SET_RESP_CMDID, 1133 WMI_SEND_SINGLEAMSDU_CMDID, 1134 1135 /* Station power save specific config */ 1136 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1137 WMI_STA_POWERSAVE_PARAM_CMDID, 1138 WMI_STA_MIMO_PS_MODE_CMDID, 1139 1140 /** DFS-specific commands */ 1141 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1142 WMI_PDEV_DFS_DISABLE_CMDID, 1143 1144 /* Roaming specific commands */ 1145 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1146 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1147 WMI_ROAM_SCAN_PERIOD, 1148 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1149 WMI_ROAM_AP_PROFILE, 1150 1151 /* offload scan specific commands */ 1152 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1153 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1154 WMI_OFL_SCAN_PERIOD, 1155 1156 /* P2P specific commands */ 1157 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1158 WMI_P2P_DEV_SET_DISCOVERABILITY, 1159 WMI_P2P_GO_SET_BEACON_IE, 1160 WMI_P2P_GO_SET_PROBE_RESP_IE, 1161 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1162 1163 /* AP power save specific config */ 1164 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1165 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1166 1167 /* Rate-control specific commands */ 1168 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1169 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1170 1171 /* WLAN Profiling commands. */ 1172 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1173 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1174 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1175 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1176 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1177 1178 /* Suspend resume command Ids */ 1179 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1180 WMI_PDEV_RESUME_CMDID, 1181 1182 /* Beacon filter commands */ 1183 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1184 WMI_RMV_BCN_FILTER_CMDID, 1185 1186 /* WOW Specific WMI commands*/ 1187 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1188 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1189 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1190 WMI_WOW_ENABLE_CMDID, 1191 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1192 1193 /* RTT measurement related cmd */ 1194 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1195 WMI_RTT_TSF_CMDID, 1196 1197 /* spectral scan commands */ 1198 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1199 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1200 1201 /* F/W stats */ 1202 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1203 1204 /* ARP OFFLOAD REQUEST*/ 1205 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1206 1207 /* NS offload confid*/ 1208 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1209 1210 /* GTK offload Specific WMI commands*/ 1211 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1212 1213 /* CSA offload Specific WMI commands*/ 1214 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1215 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1216 1217 /* Chatter commands*/ 1218 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1219 1220 /* addba specific commands */ 1221 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1222 WMI_PEER_TID_DELBA_CMDID, 1223 1224 /* set station mimo powersave method */ 1225 WMI_STA_DTIM_PS_METHOD_CMDID, 1226 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1227 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1228 1229 /* STA Keep alive parameter configuration, 1230 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1231 */ 1232 WMI_STA_KEEPALIVE_CMD, 1233 1234 /* misc command group */ 1235 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1236 WMI_PDEV_UTF_CMDID, 1237 WMI_DBGLOG_CFG_CMDID, 1238 WMI_PDEV_QVIT_CMDID, 1239 WMI_PDEV_FTM_INTG_CMDID, 1240 WMI_VDEV_SET_KEEPALIVE_CMDID, 1241 WMI_VDEV_GET_KEEPALIVE_CMDID, 1242 WMI_FORCE_FW_HANG_CMDID, 1243 1244 /* GPIO Configuration */ 1245 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1246 WMI_GPIO_OUTPUT_CMDID, 1247 }; 1248 1249 enum wmi_event_id { 1250 WMI_SERVICE_READY_EVENTID = 0x1, 1251 WMI_READY_EVENTID, 1252 WMI_SERVICE_AVAILABLE_EVENTID, 1253 1254 /* Scan specific events */ 1255 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1256 1257 /* PDEV specific events */ 1258 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1259 WMI_CHAN_INFO_EVENTID, 1260 WMI_PHYERR_EVENTID, 1261 1262 /* VDEV specific events */ 1263 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1264 WMI_VDEV_STOPPED_EVENTID, 1265 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1266 1267 /* peer specific events */ 1268 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1269 1270 /* beacon/mgmt specific events */ 1271 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1272 WMI_HOST_SWBA_EVENTID, 1273 WMI_TBTTOFFSET_UPDATE_EVENTID, 1274 1275 /* ADDBA Related WMI Events*/ 1276 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1277 WMI_TX_ADDBA_COMPLETE_EVENTID, 1278 1279 /* Roam event to trigger roaming on host */ 1280 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1281 WMI_PROFILE_MATCH, 1282 1283 /* WoW */ 1284 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1285 1286 /* RTT */ 1287 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1288 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1289 WMI_RTT_ERROR_REPORT_EVENTID, 1290 1291 /* GTK offload */ 1292 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1293 WMI_GTK_REKEY_FAIL_EVENTID, 1294 1295 /* CSA IE received event */ 1296 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1297 1298 /* Misc events */ 1299 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1300 WMI_PDEV_UTF_EVENTID, 1301 WMI_DEBUG_MESG_EVENTID, 1302 WMI_UPDATE_STATS_EVENTID, 1303 WMI_DEBUG_PRINT_EVENTID, 1304 WMI_DCS_INTERFERENCE_EVENTID, 1305 WMI_PDEV_QVIT_EVENTID, 1306 WMI_WLAN_PROFILE_DATA_EVENTID, 1307 WMI_PDEV_FTM_INTG_EVENTID, 1308 WMI_WLAN_FREQ_AVOID_EVENTID, 1309 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1310 1311 /* GPIO Event */ 1312 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1313 }; 1314 1315 /* Command IDs and command events for 10.X firmware */ 1316 enum wmi_10x_cmd_id { 1317 WMI_10X_START_CMDID = 0x9000, 1318 WMI_10X_END_CMDID = 0x9FFF, 1319 1320 /* initialize the wlan sub system */ 1321 WMI_10X_INIT_CMDID, 1322 1323 /* Scan specific commands */ 1324 1325 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1326 WMI_10X_STOP_SCAN_CMDID, 1327 WMI_10X_SCAN_CHAN_LIST_CMDID, 1328 WMI_10X_ECHO_CMDID, 1329 1330 /* PDEV(physical device) specific commands */ 1331 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1332 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1333 WMI_10X_PDEV_SET_PARAM_CMDID, 1334 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1335 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1336 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1337 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1338 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1339 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1340 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1341 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1342 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1343 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1344 1345 /* VDEV(virtual device) specific commands */ 1346 WMI_10X_VDEV_CREATE_CMDID, 1347 WMI_10X_VDEV_DELETE_CMDID, 1348 WMI_10X_VDEV_START_REQUEST_CMDID, 1349 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1350 WMI_10X_VDEV_UP_CMDID, 1351 WMI_10X_VDEV_STOP_CMDID, 1352 WMI_10X_VDEV_DOWN_CMDID, 1353 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1354 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1355 WMI_10X_VDEV_SET_PARAM_CMDID, 1356 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1357 1358 /* peer specific commands */ 1359 WMI_10X_PEER_CREATE_CMDID, 1360 WMI_10X_PEER_DELETE_CMDID, 1361 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1362 WMI_10X_PEER_SET_PARAM_CMDID, 1363 WMI_10X_PEER_ASSOC_CMDID, 1364 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1365 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1366 WMI_10X_PEER_MCAST_GROUP_CMDID, 1367 1368 /* beacon/management specific commands */ 1369 1370 WMI_10X_BCN_TX_CMDID, 1371 WMI_10X_BCN_PRB_TMPL_CMDID, 1372 WMI_10X_BCN_FILTER_RX_CMDID, 1373 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1374 WMI_10X_MGMT_TX_CMDID, 1375 1376 /* commands to directly control ba negotiation directly from host. */ 1377 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1378 WMI_10X_ADDBA_SEND_CMDID, 1379 WMI_10X_ADDBA_STATUS_CMDID, 1380 WMI_10X_DELBA_SEND_CMDID, 1381 WMI_10X_ADDBA_SET_RESP_CMDID, 1382 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1383 1384 /* Station power save specific config */ 1385 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1386 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1387 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1388 1389 /* set debug log config */ 1390 WMI_10X_DBGLOG_CFG_CMDID, 1391 1392 /* DFS-specific commands */ 1393 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1394 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1395 1396 /* QVIT specific command id */ 1397 WMI_10X_PDEV_QVIT_CMDID, 1398 1399 /* Offload Scan and Roaming related commands */ 1400 WMI_10X_ROAM_SCAN_MODE, 1401 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1402 WMI_10X_ROAM_SCAN_PERIOD, 1403 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1404 WMI_10X_ROAM_AP_PROFILE, 1405 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1406 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1407 WMI_10X_OFL_SCAN_PERIOD, 1408 1409 /* P2P specific commands */ 1410 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1411 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1412 WMI_10X_P2P_GO_SET_BEACON_IE, 1413 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1414 1415 /* AP power save specific config */ 1416 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1417 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1418 1419 /* Rate-control specific commands */ 1420 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1421 1422 /* WLAN Profiling commands. */ 1423 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1424 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1425 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1426 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1427 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1428 1429 /* Suspend resume command Ids */ 1430 WMI_10X_PDEV_SUSPEND_CMDID, 1431 WMI_10X_PDEV_RESUME_CMDID, 1432 1433 /* Beacon filter commands */ 1434 WMI_10X_ADD_BCN_FILTER_CMDID, 1435 WMI_10X_RMV_BCN_FILTER_CMDID, 1436 1437 /* WOW Specific WMI commands*/ 1438 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1439 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1440 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1441 WMI_10X_WOW_ENABLE_CMDID, 1442 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1443 1444 /* RTT measurement related cmd */ 1445 WMI_10X_RTT_MEASREQ_CMDID, 1446 WMI_10X_RTT_TSF_CMDID, 1447 1448 /* transmit beacon by value */ 1449 WMI_10X_PDEV_SEND_BCN_CMDID, 1450 1451 /* F/W stats */ 1452 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1453 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1454 WMI_10X_REQUEST_STATS_CMDID, 1455 1456 /* GPIO Configuration */ 1457 WMI_10X_GPIO_CONFIG_CMDID, 1458 WMI_10X_GPIO_OUTPUT_CMDID, 1459 1460 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1461 }; 1462 1463 enum wmi_10x_event_id { 1464 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1465 WMI_10X_READY_EVENTID, 1466 WMI_10X_START_EVENTID = 0x9000, 1467 WMI_10X_END_EVENTID = 0x9FFF, 1468 1469 /* Scan specific events */ 1470 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1471 WMI_10X_ECHO_EVENTID, 1472 WMI_10X_DEBUG_MESG_EVENTID, 1473 WMI_10X_UPDATE_STATS_EVENTID, 1474 1475 /* Instantaneous RSSI event */ 1476 WMI_10X_INST_RSSI_STATS_EVENTID, 1477 1478 /* VDEV specific events */ 1479 WMI_10X_VDEV_START_RESP_EVENTID, 1480 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1481 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1482 WMI_10X_VDEV_STOPPED_EVENTID, 1483 1484 /* peer specific events */ 1485 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1486 1487 /* beacon/mgmt specific events */ 1488 WMI_10X_HOST_SWBA_EVENTID, 1489 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1490 WMI_10X_MGMT_RX_EVENTID, 1491 1492 /* Channel stats event */ 1493 WMI_10X_CHAN_INFO_EVENTID, 1494 1495 /* PHY Error specific WMI event */ 1496 WMI_10X_PHYERR_EVENTID, 1497 1498 /* Roam event to trigger roaming on host */ 1499 WMI_10X_ROAM_EVENTID, 1500 1501 /* matching AP found from list of profiles */ 1502 WMI_10X_PROFILE_MATCH, 1503 1504 /* debug print message used for tracing FW code while debugging */ 1505 WMI_10X_DEBUG_PRINT_EVENTID, 1506 /* VI spoecific event */ 1507 WMI_10X_PDEV_QVIT_EVENTID, 1508 /* FW code profile data in response to profile request */ 1509 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1510 1511 /*RTT related event ID*/ 1512 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1513 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1514 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1515 1516 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1517 WMI_10X_DCS_INTERFERENCE_EVENTID, 1518 1519 /* TPC config for the current operating channel */ 1520 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1521 1522 WMI_10X_GPIO_INPUT_EVENTID, 1523 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1524 }; 1525 1526 enum wmi_10_2_cmd_id { 1527 WMI_10_2_START_CMDID = 0x9000, 1528 WMI_10_2_END_CMDID = 0x9FFF, 1529 WMI_10_2_INIT_CMDID, 1530 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1531 WMI_10_2_STOP_SCAN_CMDID, 1532 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1533 WMI_10_2_ECHO_CMDID, 1534 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1535 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1536 WMI_10_2_PDEV_SET_PARAM_CMDID, 1537 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1538 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1539 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1540 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1541 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1542 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1543 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1544 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1545 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1546 WMI_10_2_VDEV_CREATE_CMDID, 1547 WMI_10_2_VDEV_DELETE_CMDID, 1548 WMI_10_2_VDEV_START_REQUEST_CMDID, 1549 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1550 WMI_10_2_VDEV_UP_CMDID, 1551 WMI_10_2_VDEV_STOP_CMDID, 1552 WMI_10_2_VDEV_DOWN_CMDID, 1553 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1554 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1555 WMI_10_2_VDEV_SET_PARAM_CMDID, 1556 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1557 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1558 WMI_10_2_PEER_CREATE_CMDID, 1559 WMI_10_2_PEER_DELETE_CMDID, 1560 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1561 WMI_10_2_PEER_SET_PARAM_CMDID, 1562 WMI_10_2_PEER_ASSOC_CMDID, 1563 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1564 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1565 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1566 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1567 WMI_10_2_BCN_TX_CMDID, 1568 WMI_10_2_BCN_PRB_TMPL_CMDID, 1569 WMI_10_2_BCN_FILTER_RX_CMDID, 1570 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1571 WMI_10_2_MGMT_TX_CMDID, 1572 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1573 WMI_10_2_ADDBA_SEND_CMDID, 1574 WMI_10_2_ADDBA_STATUS_CMDID, 1575 WMI_10_2_DELBA_SEND_CMDID, 1576 WMI_10_2_ADDBA_SET_RESP_CMDID, 1577 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1578 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1579 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1580 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1581 WMI_10_2_DBGLOG_CFG_CMDID, 1582 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1583 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1584 WMI_10_2_PDEV_QVIT_CMDID, 1585 WMI_10_2_ROAM_SCAN_MODE, 1586 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1587 WMI_10_2_ROAM_SCAN_PERIOD, 1588 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1589 WMI_10_2_ROAM_AP_PROFILE, 1590 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1591 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1592 WMI_10_2_OFL_SCAN_PERIOD, 1593 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1594 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1595 WMI_10_2_P2P_GO_SET_BEACON_IE, 1596 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1597 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1598 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1599 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1600 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1601 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1602 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1603 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1604 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1605 WMI_10_2_PDEV_SUSPEND_CMDID, 1606 WMI_10_2_PDEV_RESUME_CMDID, 1607 WMI_10_2_ADD_BCN_FILTER_CMDID, 1608 WMI_10_2_RMV_BCN_FILTER_CMDID, 1609 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1610 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1611 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1612 WMI_10_2_WOW_ENABLE_CMDID, 1613 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1614 WMI_10_2_RTT_MEASREQ_CMDID, 1615 WMI_10_2_RTT_TSF_CMDID, 1616 WMI_10_2_RTT_KEEPALIVE_CMDID, 1617 WMI_10_2_PDEV_SEND_BCN_CMDID, 1618 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1619 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1620 WMI_10_2_REQUEST_STATS_CMDID, 1621 WMI_10_2_GPIO_CONFIG_CMDID, 1622 WMI_10_2_GPIO_OUTPUT_CMDID, 1623 WMI_10_2_VDEV_RATEMASK_CMDID, 1624 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1625 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1626 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1627 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1628 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1629 WMI_10_2_FORCE_FW_HANG_CMDID, 1630 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1631 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1632 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1633 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1634 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1635 WMI_10_2_PDEV_GET_INFO, 1636 WMI_10_2_VDEV_GET_INFO, 1637 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1638 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1639 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1640 WMI_10_2_MU_CAL_START_CMDID, 1641 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1642 WMI_10_2_SET_CCA_PARAMS, 1643 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1644 WMI_10_2_FWTEST_CMDID, 1645 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, 1646 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1647 }; 1648 1649 enum wmi_10_2_event_id { 1650 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1651 WMI_10_2_READY_EVENTID, 1652 WMI_10_2_DEBUG_MESG_EVENTID, 1653 WMI_10_2_START_EVENTID = 0x9000, 1654 WMI_10_2_END_EVENTID = 0x9FFF, 1655 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1656 WMI_10_2_ECHO_EVENTID, 1657 WMI_10_2_UPDATE_STATS_EVENTID, 1658 WMI_10_2_INST_RSSI_STATS_EVENTID, 1659 WMI_10_2_VDEV_START_RESP_EVENTID, 1660 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1661 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1662 WMI_10_2_VDEV_STOPPED_EVENTID, 1663 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1664 WMI_10_2_HOST_SWBA_EVENTID, 1665 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1666 WMI_10_2_MGMT_RX_EVENTID, 1667 WMI_10_2_CHAN_INFO_EVENTID, 1668 WMI_10_2_PHYERR_EVENTID, 1669 WMI_10_2_ROAM_EVENTID, 1670 WMI_10_2_PROFILE_MATCH, 1671 WMI_10_2_DEBUG_PRINT_EVENTID, 1672 WMI_10_2_PDEV_QVIT_EVENTID, 1673 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1674 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1675 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1676 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1677 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1678 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1679 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1680 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1681 WMI_10_2_GPIO_INPUT_EVENTID, 1682 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1683 WMI_10_2_GENERIC_BUFFER_EVENTID, 1684 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1685 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1686 WMI_10_2_WDS_PEER_EVENTID, 1687 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1688 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1689 WMI_10_2_MU_REPORT_EVENTID, 1690 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1691 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1692 }; 1693 1694 enum wmi_10_4_cmd_id { 1695 WMI_10_4_START_CMDID = 0x9000, 1696 WMI_10_4_END_CMDID = 0x9FFF, 1697 WMI_10_4_INIT_CMDID, 1698 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1699 WMI_10_4_STOP_SCAN_CMDID, 1700 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1701 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1702 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1703 WMI_10_4_ECHO_CMDID, 1704 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1705 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1706 WMI_10_4_PDEV_SET_PARAM_CMDID, 1707 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1708 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1709 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1710 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1711 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1712 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1713 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1714 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1715 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1716 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1717 WMI_10_4_VDEV_CREATE_CMDID, 1718 WMI_10_4_VDEV_DELETE_CMDID, 1719 WMI_10_4_VDEV_START_REQUEST_CMDID, 1720 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1721 WMI_10_4_VDEV_UP_CMDID, 1722 WMI_10_4_VDEV_STOP_CMDID, 1723 WMI_10_4_VDEV_DOWN_CMDID, 1724 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1725 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1726 WMI_10_4_VDEV_SET_PARAM_CMDID, 1727 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1728 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1729 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1730 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1731 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1732 WMI_10_4_PEER_CREATE_CMDID, 1733 WMI_10_4_PEER_DELETE_CMDID, 1734 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1735 WMI_10_4_PEER_SET_PARAM_CMDID, 1736 WMI_10_4_PEER_ASSOC_CMDID, 1737 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1738 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1739 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1740 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1741 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1742 WMI_10_4_BCN_TX_CMDID, 1743 WMI_10_4_PDEV_SEND_BCN_CMDID, 1744 WMI_10_4_BCN_PRB_TMPL_CMDID, 1745 WMI_10_4_BCN_FILTER_RX_CMDID, 1746 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1747 WMI_10_4_MGMT_TX_CMDID, 1748 WMI_10_4_PRB_TMPL_CMDID, 1749 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1750 WMI_10_4_ADDBA_SEND_CMDID, 1751 WMI_10_4_ADDBA_STATUS_CMDID, 1752 WMI_10_4_DELBA_SEND_CMDID, 1753 WMI_10_4_ADDBA_SET_RESP_CMDID, 1754 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1755 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1756 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1757 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1758 WMI_10_4_DBGLOG_CFG_CMDID, 1759 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1760 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1761 WMI_10_4_PDEV_QVIT_CMDID, 1762 WMI_10_4_ROAM_SCAN_MODE, 1763 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1764 WMI_10_4_ROAM_SCAN_PERIOD, 1765 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1766 WMI_10_4_ROAM_AP_PROFILE, 1767 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1768 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1769 WMI_10_4_OFL_SCAN_PERIOD, 1770 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1771 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1772 WMI_10_4_P2P_GO_SET_BEACON_IE, 1773 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1774 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1775 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1776 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1777 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1778 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1779 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1780 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1781 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1782 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1783 WMI_10_4_PDEV_SUSPEND_CMDID, 1784 WMI_10_4_PDEV_RESUME_CMDID, 1785 WMI_10_4_ADD_BCN_FILTER_CMDID, 1786 WMI_10_4_RMV_BCN_FILTER_CMDID, 1787 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1788 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1789 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1790 WMI_10_4_WOW_ENABLE_CMDID, 1791 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1792 WMI_10_4_RTT_MEASREQ_CMDID, 1793 WMI_10_4_RTT_TSF_CMDID, 1794 WMI_10_4_RTT_KEEPALIVE_CMDID, 1795 WMI_10_4_OEM_REQ_CMDID, 1796 WMI_10_4_NAN_CMDID, 1797 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1798 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1799 WMI_10_4_REQUEST_STATS_CMDID, 1800 WMI_10_4_GPIO_CONFIG_CMDID, 1801 WMI_10_4_GPIO_OUTPUT_CMDID, 1802 WMI_10_4_VDEV_RATEMASK_CMDID, 1803 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1804 WMI_10_4_GTK_OFFLOAD_CMDID, 1805 WMI_10_4_QBOOST_CFG_CMDID, 1806 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1807 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1808 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1809 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1810 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1811 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1812 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1813 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1814 WMI_10_4_FORCE_FW_HANG_CMDID, 1815 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1816 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1817 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1818 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1819 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1820 WMI_10_4_PDEV_FIPS_CMDID, 1821 WMI_10_4_TT_SET_CONF_CMDID, 1822 WMI_10_4_FWTEST_CMDID, 1823 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1824 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1825 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1826 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1827 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1828 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1829 WMI_10_4_PDEV_GET_TPC_CMDID, 1830 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1831 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1832 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1833 WMI_10_4_PDEV_GET_INFO_CMDID, 1834 WMI_10_4_VDEV_GET_INFO_CMDID, 1835 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1836 WMI_10_4_MU_CAL_START_CMDID, 1837 WMI_10_4_SET_CCA_PARAMS_CMDID, 1838 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1839 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1840 WMI_10_4_VDEV_SET_IE_CMDID, 1841 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1842 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1843 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1844 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1845 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1846 WMI_10_4_BTCOEX_CFG_CMDID, 1847 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1848 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1849 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1850 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1851 WMI_10_4_COEX_VERSION_CFG_CMID, 1852 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1853 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1854 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1855 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1856 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1857 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1858 WMI_10_4_GET_TSF_TIMER_CMDID, 1859 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1860 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1861 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1862 WMI_10_4_TDLS_SET_STATE_CMDID, 1863 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1864 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1865 WMI_10_4_PDEV_SEND_FD_CMDID, 1866 WMI_10_4_ENABLE_FILS_CMDID, 1867 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1868 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1869 WMI_10_4_RADAR_FOUND_CMDID, 1870 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1871 }; 1872 1873 enum wmi_10_4_event_id { 1874 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1875 WMI_10_4_READY_EVENTID, 1876 WMI_10_4_DEBUG_MESG_EVENTID, 1877 WMI_10_4_START_EVENTID = 0x9000, 1878 WMI_10_4_END_EVENTID = 0x9FFF, 1879 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1880 WMI_10_4_ECHO_EVENTID, 1881 WMI_10_4_UPDATE_STATS_EVENTID, 1882 WMI_10_4_INST_RSSI_STATS_EVENTID, 1883 WMI_10_4_VDEV_START_RESP_EVENTID, 1884 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1885 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1886 WMI_10_4_VDEV_STOPPED_EVENTID, 1887 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1888 WMI_10_4_HOST_SWBA_EVENTID, 1889 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1890 WMI_10_4_MGMT_RX_EVENTID, 1891 WMI_10_4_CHAN_INFO_EVENTID, 1892 WMI_10_4_PHYERR_EVENTID, 1893 WMI_10_4_ROAM_EVENTID, 1894 WMI_10_4_PROFILE_MATCH, 1895 WMI_10_4_DEBUG_PRINT_EVENTID, 1896 WMI_10_4_PDEV_QVIT_EVENTID, 1897 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1898 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1899 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1900 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1901 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1902 WMI_10_4_OEM_CAPABILITY_EVENTID, 1903 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1904 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1905 WMI_10_4_NAN_EVENTID, 1906 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1907 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1908 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1909 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1910 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1911 WMI_10_4_CSA_HANDLING_EVENTID, 1912 WMI_10_4_GPIO_INPUT_EVENTID, 1913 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1914 WMI_10_4_GENERIC_BUFFER_EVENTID, 1915 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1916 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1917 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1918 WMI_10_4_WDS_PEER_EVENTID, 1919 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1920 WMI_10_4_PDEV_FIPS_EVENTID, 1921 WMI_10_4_TT_STATS_EVENTID, 1922 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1923 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1924 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1925 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1926 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1927 WMI_10_4_PDEV_TPC_EVENTID, 1928 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1929 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1930 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1931 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1932 WMI_10_4_MU_REPORT_EVENTID, 1933 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1934 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1935 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1936 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1937 WMI_10_4_ATF_PEER_STATS_EVENTID, 1938 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1939 WMI_10_4_NAC_RSSI_EVENTID, 1940 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1941 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1942 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1943 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1944 WMI_10_4_TDLS_PEER_EVENTID, 1945 WMI_10_4_HOST_SWFDA_EVENTID, 1946 WMI_10_4_ESP_ESTIMATE_EVENTID, 1947 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1948 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1949 }; 1950 1951 enum wmi_phy_mode { 1952 MODE_11A = 0, /* 11a Mode */ 1953 MODE_11G = 1, /* 11b/g Mode */ 1954 MODE_11B = 2, /* 11b Mode */ 1955 MODE_11GONLY = 3, /* 11g only Mode */ 1956 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1957 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1958 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1959 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1960 MODE_11AC_VHT20 = 8, 1961 MODE_11AC_VHT40 = 9, 1962 MODE_11AC_VHT80 = 10, 1963 /* MODE_11AC_VHT160 = 11, */ 1964 MODE_11AC_VHT20_2G = 11, 1965 MODE_11AC_VHT40_2G = 12, 1966 MODE_11AC_VHT80_2G = 13, 1967 MODE_11AC_VHT80_80 = 14, 1968 MODE_11AC_VHT160 = 15, 1969 MODE_UNKNOWN = 16, 1970 MODE_MAX = 16 1971 }; 1972 1973 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1974 { 1975 switch (mode) { 1976 case MODE_11A: 1977 return "11a"; 1978 case MODE_11G: 1979 return "11g"; 1980 case MODE_11B: 1981 return "11b"; 1982 case MODE_11GONLY: 1983 return "11gonly"; 1984 case MODE_11NA_HT20: 1985 return "11na-ht20"; 1986 case MODE_11NG_HT20: 1987 return "11ng-ht20"; 1988 case MODE_11NA_HT40: 1989 return "11na-ht40"; 1990 case MODE_11NG_HT40: 1991 return "11ng-ht40"; 1992 case MODE_11AC_VHT20: 1993 return "11ac-vht20"; 1994 case MODE_11AC_VHT40: 1995 return "11ac-vht40"; 1996 case MODE_11AC_VHT80: 1997 return "11ac-vht80"; 1998 case MODE_11AC_VHT160: 1999 return "11ac-vht160"; 2000 case MODE_11AC_VHT80_80: 2001 return "11ac-vht80+80"; 2002 case MODE_11AC_VHT20_2G: 2003 return "11ac-vht20-2g"; 2004 case MODE_11AC_VHT40_2G: 2005 return "11ac-vht40-2g"; 2006 case MODE_11AC_VHT80_2G: 2007 return "11ac-vht80-2g"; 2008 case MODE_UNKNOWN: 2009 /* skip */ 2010 break; 2011 2012 /* no default handler to allow compiler to check that the 2013 * enum is fully handled 2014 */ 2015 } 2016 2017 return "<unknown>"; 2018 } 2019 2020 #define WMI_CHAN_LIST_TAG 0x1 2021 #define WMI_SSID_LIST_TAG 0x2 2022 #define WMI_BSSID_LIST_TAG 0x3 2023 #define WMI_IE_TAG 0x4 2024 2025 struct wmi_channel { 2026 __le32 mhz; 2027 __le32 band_center_freq1; 2028 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 2029 union { 2030 __le32 flags; /* WMI_CHAN_FLAG_ */ 2031 struct { 2032 u8 mode; /* only 6 LSBs */ 2033 } __packed; 2034 } __packed; 2035 union { 2036 __le32 reginfo0; 2037 struct { 2038 /* note: power unit is 0.5 dBm */ 2039 u8 min_power; 2040 u8 max_power; 2041 u8 reg_power; 2042 u8 reg_classid; 2043 } __packed; 2044 } __packed; 2045 union { 2046 __le32 reginfo1; 2047 struct { 2048 u8 antenna_max; 2049 u8 max_tx_power; 2050 } __packed; 2051 } __packed; 2052 } __packed; 2053 2054 struct wmi_channel_arg { 2055 u32 freq; 2056 u32 band_center_freq1; 2057 u32 band_center_freq2; 2058 bool passive; 2059 bool allow_ibss; 2060 bool allow_ht; 2061 bool allow_vht; 2062 bool ht40plus; 2063 bool chan_radar; 2064 /* note: power unit is 0.5 dBm */ 2065 u32 min_power; 2066 u32 max_power; 2067 u32 max_reg_power; 2068 u32 max_antenna_gain; 2069 u32 reg_class_id; 2070 enum wmi_phy_mode mode; 2071 }; 2072 2073 enum wmi_channel_change_cause { 2074 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2075 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2076 }; 2077 2078 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2079 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2080 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2081 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2082 #define WMI_CHAN_FLAG_DFS (1 << 10) 2083 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2084 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2085 2086 /* Indicate reason for channel switch */ 2087 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2088 2089 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2090 2091 /* HT Capabilities*/ 2092 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2093 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2094 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2095 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2096 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2097 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2098 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2099 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2100 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2101 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2102 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2103 #define WMI_HT_CAP_HT40_SGI 0x0800 2104 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ 2105 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ 2106 2107 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2108 WMI_HT_CAP_HT20_SGI | \ 2109 WMI_HT_CAP_HT40_SGI | \ 2110 WMI_HT_CAP_TX_STBC | \ 2111 WMI_HT_CAP_RX_STBC | \ 2112 WMI_HT_CAP_LDPC) 2113 2114 /* 2115 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2116 * field. The fields not defined here are not supported, or reserved. 2117 * Do not change these masks and if you have to add new one follow the 2118 * bitmask as specified by 802.11ac draft. 2119 */ 2120 2121 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2122 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2123 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2124 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2125 #define WMI_VHT_CAP_TX_STBC 0x00000080 2126 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2127 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2128 #define WMI_VHT_CAP_SU_BFER 0x00000800 2129 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2130 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2131 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2132 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2133 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2134 #define WMI_VHT_CAP_MU_BFER 0x00080000 2135 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2136 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2137 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2138 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2139 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2140 2141 /* The following also refer for max HT AMSDU */ 2142 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2143 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2144 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2145 2146 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2147 WMI_VHT_CAP_RX_LDPC | \ 2148 WMI_VHT_CAP_SGI_80MHZ | \ 2149 WMI_VHT_CAP_TX_STBC | \ 2150 WMI_VHT_CAP_RX_STBC_MASK | \ 2151 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2152 WMI_VHT_CAP_RX_FIXED_ANT | \ 2153 WMI_VHT_CAP_TX_FIXED_ANT) 2154 2155 /* 2156 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2157 * 802.11ac 2158 */ 2159 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2160 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2161 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2162 2163 enum { 2164 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2165 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2166 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2167 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2168 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2169 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2170 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2171 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2172 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2173 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2174 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2175 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2176 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2177 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2178 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2179 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2180 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2181 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2182 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2183 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2184 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2185 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2186 REGDMN_MODE_ALL = 0xffffffff 2187 }; 2188 2189 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2190 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2191 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2192 2193 /* regulatory capabilities */ 2194 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2195 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2196 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2197 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2198 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2199 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2200 2201 struct hal_reg_capabilities { 2202 /* regdomain value specified in EEPROM */ 2203 __le32 eeprom_rd; 2204 /*regdomain */ 2205 __le32 eeprom_rd_ext; 2206 /* CAP1 capabilities bit map. */ 2207 __le32 regcap1; 2208 /* REGDMN EEPROM CAP. */ 2209 __le32 regcap2; 2210 /* REGDMN MODE */ 2211 __le32 wireless_modes; 2212 __le32 low_2ghz_chan; 2213 __le32 high_2ghz_chan; 2214 __le32 low_5ghz_chan; 2215 __le32 high_5ghz_chan; 2216 } __packed; 2217 2218 enum wlan_mode_capability { 2219 WHAL_WLAN_11A_CAPABILITY = 0x1, 2220 WHAL_WLAN_11G_CAPABILITY = 0x2, 2221 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2222 }; 2223 2224 /* structure used by FW for requesting host memory */ 2225 struct wlan_host_mem_req { 2226 /* ID of the request */ 2227 __le32 req_id; 2228 /* size of the of each unit */ 2229 __le32 unit_size; 2230 /* flags to indicate that 2231 * the number units is dependent 2232 * on number of resources(num vdevs num peers .. etc) 2233 */ 2234 __le32 num_unit_info; 2235 /* 2236 * actual number of units to allocate . if flags in the num_unit_info 2237 * indicate that number of units is tied to number of a particular 2238 * resource to allocate then num_units filed is set to 0 and host 2239 * will derive the number units from number of the resources it is 2240 * requesting. 2241 */ 2242 __le32 num_units; 2243 } __packed; 2244 2245 /* 2246 * The following struct holds optional payload for 2247 * wmi_service_ready_event,e.g., 11ac pass some of the 2248 * device capability to the host. 2249 */ 2250 struct wmi_service_ready_event { 2251 __le32 sw_version; 2252 __le32 sw_version_1; 2253 __le32 abi_version; 2254 /* WMI_PHY_CAPABILITY */ 2255 __le32 phy_capability; 2256 /* Maximum number of frag table entries that SW will populate less 1 */ 2257 __le32 max_frag_entry; 2258 __le32 wmi_service_bitmap[16]; 2259 __le32 num_rf_chains; 2260 /* 2261 * The following field is only valid for service type 2262 * WMI_SERVICE_11AC 2263 */ 2264 __le32 ht_cap_info; /* WMI HT Capability */ 2265 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2266 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2267 __le32 hw_min_tx_power; 2268 __le32 hw_max_tx_power; 2269 struct hal_reg_capabilities hal_reg_capabilities; 2270 __le32 sys_cap_info; 2271 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2272 /* 2273 * Max beacon and Probe Response IE offload size 2274 * (includes optional P2P IEs) 2275 */ 2276 __le32 max_bcn_ie_size; 2277 /* 2278 * request to host to allocate a chuck of memory and pss it down to FW 2279 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2280 * data structures. Only valid for low latency interfaces like PCIE 2281 * where FW can access this memory directly (or) by DMA. 2282 */ 2283 __le32 num_mem_reqs; 2284 struct wlan_host_mem_req mem_reqs[0]; 2285 } __packed; 2286 2287 /* This is the definition from 10.X firmware branch */ 2288 struct wmi_10x_service_ready_event { 2289 __le32 sw_version; 2290 __le32 abi_version; 2291 2292 /* WMI_PHY_CAPABILITY */ 2293 __le32 phy_capability; 2294 2295 /* Maximum number of frag table entries that SW will populate less 1 */ 2296 __le32 max_frag_entry; 2297 __le32 wmi_service_bitmap[16]; 2298 __le32 num_rf_chains; 2299 2300 /* 2301 * The following field is only valid for service type 2302 * WMI_SERVICE_11AC 2303 */ 2304 __le32 ht_cap_info; /* WMI HT Capability */ 2305 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2306 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2307 __le32 hw_min_tx_power; 2308 __le32 hw_max_tx_power; 2309 2310 struct hal_reg_capabilities hal_reg_capabilities; 2311 2312 __le32 sys_cap_info; 2313 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2314 2315 /* 2316 * request to host to allocate a chuck of memory and pss it down to FW 2317 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2318 * data structures. Only valid for low latency interfaces like PCIE 2319 * where FW can access this memory directly (or) by DMA. 2320 */ 2321 __le32 num_mem_reqs; 2322 2323 struct wlan_host_mem_req mem_reqs[0]; 2324 } __packed; 2325 2326 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2327 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2328 2329 struct wmi_ready_event { 2330 __le32 sw_version; 2331 __le32 abi_version; 2332 struct wmi_mac_addr mac_addr; 2333 __le32 status; 2334 } __packed; 2335 2336 struct wmi_resource_config { 2337 /* number of virtual devices (VAPs) to support */ 2338 __le32 num_vdevs; 2339 2340 /* number of peer nodes to support */ 2341 __le32 num_peers; 2342 2343 /* 2344 * In offload mode target supports features like WOW, chatter and 2345 * other protocol offloads. In order to support them some 2346 * functionalities like reorder buffering, PN checking need to be 2347 * done in target. This determines maximum number of peers supported 2348 * by target in offload mode 2349 */ 2350 __le32 num_offload_peers; 2351 2352 /* For target-based RX reordering */ 2353 __le32 num_offload_reorder_bufs; 2354 2355 /* number of keys per peer */ 2356 __le32 num_peer_keys; 2357 2358 /* total number of TX/RX data TIDs */ 2359 __le32 num_tids; 2360 2361 /* 2362 * max skid for resolving hash collisions 2363 * 2364 * The address search table is sparse, so that if two MAC addresses 2365 * result in the same hash value, the second of these conflicting 2366 * entries can slide to the next index in the address search table, 2367 * and use it, if it is unoccupied. This ast_skid_limit parameter 2368 * specifies the upper bound on how many subsequent indices to search 2369 * over to find an unoccupied space. 2370 */ 2371 __le32 ast_skid_limit; 2372 2373 /* 2374 * the nominal chain mask for transmit 2375 * 2376 * The chain mask may be modified dynamically, e.g. to operate AP 2377 * tx with a reduced number of chains if no clients are associated. 2378 * This configuration parameter specifies the nominal chain-mask that 2379 * should be used when not operating with a reduced set of tx chains. 2380 */ 2381 __le32 tx_chain_mask; 2382 2383 /* 2384 * the nominal chain mask for receive 2385 * 2386 * The chain mask may be modified dynamically, e.g. for a client 2387 * to use a reduced number of chains for receive if the traffic to 2388 * the client is low enough that it doesn't require downlink MIMO 2389 * or antenna diversity. 2390 * This configuration parameter specifies the nominal chain-mask that 2391 * should be used when not operating with a reduced set of rx chains. 2392 */ 2393 __le32 rx_chain_mask; 2394 2395 /* 2396 * what rx reorder timeout (ms) to use for the AC 2397 * 2398 * Each WMM access class (voice, video, best-effort, background) will 2399 * have its own timeout value to dictate how long to wait for missing 2400 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2401 * already been received. 2402 * This parameter specifies the timeout in milliseconds for each 2403 * class. 2404 */ 2405 __le32 rx_timeout_pri_vi; 2406 __le32 rx_timeout_pri_vo; 2407 __le32 rx_timeout_pri_be; 2408 __le32 rx_timeout_pri_bk; 2409 2410 /* 2411 * what mode the rx should decap packets to 2412 * 2413 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2414 * THis setting also determines the default TX behavior, however TX 2415 * behavior can be modified on a per VAP basis during VAP init 2416 */ 2417 __le32 rx_decap_mode; 2418 2419 /* what is the maximum number of scan requests that can be queued */ 2420 __le32 scan_max_pending_reqs; 2421 2422 /* maximum VDEV that could use BMISS offload */ 2423 __le32 bmiss_offload_max_vdev; 2424 2425 /* maximum VDEV that could use offload roaming */ 2426 __le32 roam_offload_max_vdev; 2427 2428 /* maximum AP profiles that would push to offload roaming */ 2429 __le32 roam_offload_max_ap_profiles; 2430 2431 /* 2432 * how many groups to use for mcast->ucast conversion 2433 * 2434 * The target's WAL maintains a table to hold information regarding 2435 * which peers belong to a given multicast group, so that if 2436 * multicast->unicast conversion is enabled, the target can convert 2437 * multicast tx frames to a series of unicast tx frames, to each 2438 * peer within the multicast group. 2439 This num_mcast_groups configuration parameter tells the target how 2440 * many multicast groups to provide storage for within its multicast 2441 * group membership table. 2442 */ 2443 __le32 num_mcast_groups; 2444 2445 /* 2446 * size to alloc for the mcast membership table 2447 * 2448 * This num_mcast_table_elems configuration parameter tells the 2449 * target how many peer elements it needs to provide storage for in 2450 * its multicast group membership table. 2451 * These multicast group membership table elements are shared by the 2452 * multicast groups stored within the table. 2453 */ 2454 __le32 num_mcast_table_elems; 2455 2456 /* 2457 * whether/how to do multicast->unicast conversion 2458 * 2459 * This configuration parameter specifies whether the target should 2460 * perform multicast --> unicast conversion on transmit, and if so, 2461 * what to do if it finds no entries in its multicast group 2462 * membership table for the multicast IP address in the tx frame. 2463 * Configuration value: 2464 * 0 -> Do not perform multicast to unicast conversion. 2465 * 1 -> Convert multicast frames to unicast, if the IP multicast 2466 * address from the tx frame is found in the multicast group 2467 * membership table. If the IP multicast address is not found, 2468 * drop the frame. 2469 * 2 -> Convert multicast frames to unicast, if the IP multicast 2470 * address from the tx frame is found in the multicast group 2471 * membership table. If the IP multicast address is not found, 2472 * transmit the frame as multicast. 2473 */ 2474 __le32 mcast2ucast_mode; 2475 2476 /* 2477 * how much memory to allocate for a tx PPDU dbg log 2478 * 2479 * This parameter controls how much memory the target will allocate 2480 * to store a log of tx PPDU meta-information (how large the PPDU 2481 * was, when it was sent, whether it was successful, etc.) 2482 */ 2483 __le32 tx_dbg_log_size; 2484 2485 /* how many AST entries to be allocated for WDS */ 2486 __le32 num_wds_entries; 2487 2488 /* 2489 * MAC DMA burst size, e.g., For target PCI limit can be 2490 * 0 -default, 1 256B 2491 */ 2492 __le32 dma_burst_size; 2493 2494 /* 2495 * Fixed delimiters to be inserted after every MPDU to 2496 * account for interface latency to avoid underrun. 2497 */ 2498 __le32 mac_aggr_delim; 2499 2500 /* 2501 * determine whether target is responsible for detecting duplicate 2502 * non-aggregate MPDU and timing out stale fragments. 2503 * 2504 * A-MPDU reordering is always performed on the target. 2505 * 2506 * 0: target responsible for frag timeout and dup checking 2507 * 1: host responsible for frag timeout and dup checking 2508 */ 2509 __le32 rx_skip_defrag_timeout_dup_detection_check; 2510 2511 /* 2512 * Configuration for VoW : 2513 * No of Video Nodes to be supported 2514 * and Max no of descriptors for each Video link (node). 2515 */ 2516 __le32 vow_config; 2517 2518 /* maximum VDEV that could use GTK offload */ 2519 __le32 gtk_offload_max_vdev; 2520 2521 /* Number of msdu descriptors target should use */ 2522 __le32 num_msdu_desc; 2523 2524 /* 2525 * Max. number of Tx fragments per MSDU 2526 * This parameter controls the max number of Tx fragments per MSDU. 2527 * This is sent by the target as part of the WMI_SERVICE_READY event 2528 * and is overridden by the OS shim as required. 2529 */ 2530 __le32 max_frag_entries; 2531 } __packed; 2532 2533 struct wmi_resource_config_10x { 2534 /* number of virtual devices (VAPs) to support */ 2535 __le32 num_vdevs; 2536 2537 /* number of peer nodes to support */ 2538 __le32 num_peers; 2539 2540 /* number of keys per peer */ 2541 __le32 num_peer_keys; 2542 2543 /* total number of TX/RX data TIDs */ 2544 __le32 num_tids; 2545 2546 /* 2547 * max skid for resolving hash collisions 2548 * 2549 * The address search table is sparse, so that if two MAC addresses 2550 * result in the same hash value, the second of these conflicting 2551 * entries can slide to the next index in the address search table, 2552 * and use it, if it is unoccupied. This ast_skid_limit parameter 2553 * specifies the upper bound on how many subsequent indices to search 2554 * over to find an unoccupied space. 2555 */ 2556 __le32 ast_skid_limit; 2557 2558 /* 2559 * the nominal chain mask for transmit 2560 * 2561 * The chain mask may be modified dynamically, e.g. to operate AP 2562 * tx with a reduced number of chains if no clients are associated. 2563 * This configuration parameter specifies the nominal chain-mask that 2564 * should be used when not operating with a reduced set of tx chains. 2565 */ 2566 __le32 tx_chain_mask; 2567 2568 /* 2569 * the nominal chain mask for receive 2570 * 2571 * The chain mask may be modified dynamically, e.g. for a client 2572 * to use a reduced number of chains for receive if the traffic to 2573 * the client is low enough that it doesn't require downlink MIMO 2574 * or antenna diversity. 2575 * This configuration parameter specifies the nominal chain-mask that 2576 * should be used when not operating with a reduced set of rx chains. 2577 */ 2578 __le32 rx_chain_mask; 2579 2580 /* 2581 * what rx reorder timeout (ms) to use for the AC 2582 * 2583 * Each WMM access class (voice, video, best-effort, background) will 2584 * have its own timeout value to dictate how long to wait for missing 2585 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2586 * already been received. 2587 * This parameter specifies the timeout in milliseconds for each 2588 * class. 2589 */ 2590 __le32 rx_timeout_pri_vi; 2591 __le32 rx_timeout_pri_vo; 2592 __le32 rx_timeout_pri_be; 2593 __le32 rx_timeout_pri_bk; 2594 2595 /* 2596 * what mode the rx should decap packets to 2597 * 2598 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2599 * THis setting also determines the default TX behavior, however TX 2600 * behavior can be modified on a per VAP basis during VAP init 2601 */ 2602 __le32 rx_decap_mode; 2603 2604 /* what is the maximum number of scan requests that can be queued */ 2605 __le32 scan_max_pending_reqs; 2606 2607 /* maximum VDEV that could use BMISS offload */ 2608 __le32 bmiss_offload_max_vdev; 2609 2610 /* maximum VDEV that could use offload roaming */ 2611 __le32 roam_offload_max_vdev; 2612 2613 /* maximum AP profiles that would push to offload roaming */ 2614 __le32 roam_offload_max_ap_profiles; 2615 2616 /* 2617 * how many groups to use for mcast->ucast conversion 2618 * 2619 * The target's WAL maintains a table to hold information regarding 2620 * which peers belong to a given multicast group, so that if 2621 * multicast->unicast conversion is enabled, the target can convert 2622 * multicast tx frames to a series of unicast tx frames, to each 2623 * peer within the multicast group. 2624 This num_mcast_groups configuration parameter tells the target how 2625 * many multicast groups to provide storage for within its multicast 2626 * group membership table. 2627 */ 2628 __le32 num_mcast_groups; 2629 2630 /* 2631 * size to alloc for the mcast membership table 2632 * 2633 * This num_mcast_table_elems configuration parameter tells the 2634 * target how many peer elements it needs to provide storage for in 2635 * its multicast group membership table. 2636 * These multicast group membership table elements are shared by the 2637 * multicast groups stored within the table. 2638 */ 2639 __le32 num_mcast_table_elems; 2640 2641 /* 2642 * whether/how to do multicast->unicast conversion 2643 * 2644 * This configuration parameter specifies whether the target should 2645 * perform multicast --> unicast conversion on transmit, and if so, 2646 * what to do if it finds no entries in its multicast group 2647 * membership table for the multicast IP address in the tx frame. 2648 * Configuration value: 2649 * 0 -> Do not perform multicast to unicast conversion. 2650 * 1 -> Convert multicast frames to unicast, if the IP multicast 2651 * address from the tx frame is found in the multicast group 2652 * membership table. If the IP multicast address is not found, 2653 * drop the frame. 2654 * 2 -> Convert multicast frames to unicast, if the IP multicast 2655 * address from the tx frame is found in the multicast group 2656 * membership table. If the IP multicast address is not found, 2657 * transmit the frame as multicast. 2658 */ 2659 __le32 mcast2ucast_mode; 2660 2661 /* 2662 * how much memory to allocate for a tx PPDU dbg log 2663 * 2664 * This parameter controls how much memory the target will allocate 2665 * to store a log of tx PPDU meta-information (how large the PPDU 2666 * was, when it was sent, whether it was successful, etc.) 2667 */ 2668 __le32 tx_dbg_log_size; 2669 2670 /* how many AST entries to be allocated for WDS */ 2671 __le32 num_wds_entries; 2672 2673 /* 2674 * MAC DMA burst size, e.g., For target PCI limit can be 2675 * 0 -default, 1 256B 2676 */ 2677 __le32 dma_burst_size; 2678 2679 /* 2680 * Fixed delimiters to be inserted after every MPDU to 2681 * account for interface latency to avoid underrun. 2682 */ 2683 __le32 mac_aggr_delim; 2684 2685 /* 2686 * determine whether target is responsible for detecting duplicate 2687 * non-aggregate MPDU and timing out stale fragments. 2688 * 2689 * A-MPDU reordering is always performed on the target. 2690 * 2691 * 0: target responsible for frag timeout and dup checking 2692 * 1: host responsible for frag timeout and dup checking 2693 */ 2694 __le32 rx_skip_defrag_timeout_dup_detection_check; 2695 2696 /* 2697 * Configuration for VoW : 2698 * No of Video Nodes to be supported 2699 * and Max no of descriptors for each Video link (node). 2700 */ 2701 __le32 vow_config; 2702 2703 /* Number of msdu descriptors target should use */ 2704 __le32 num_msdu_desc; 2705 2706 /* 2707 * Max. number of Tx fragments per MSDU 2708 * This parameter controls the max number of Tx fragments per MSDU. 2709 * This is sent by the target as part of the WMI_SERVICE_READY event 2710 * and is overridden by the OS shim as required. 2711 */ 2712 __le32 max_frag_entries; 2713 } __packed; 2714 2715 enum wmi_10_2_feature_mask { 2716 WMI_10_2_RX_BATCH_MODE = BIT(0), 2717 WMI_10_2_ATF_CONFIG = BIT(1), 2718 WMI_10_2_COEX_GPIO = BIT(3), 2719 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2720 WMI_10_2_PEER_STATS = BIT(7), 2721 }; 2722 2723 struct wmi_resource_config_10_2 { 2724 struct wmi_resource_config_10x common; 2725 __le32 max_peer_ext_stats; 2726 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2727 __le32 bk_min_free; 2728 __le32 be_min_free; 2729 __le32 vi_min_free; 2730 __le32 vo_min_free; 2731 __le32 feature_mask; 2732 } __packed; 2733 2734 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2735 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2736 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2737 2738 struct wmi_resource_config_10_4 { 2739 /* Number of virtual devices (VAPs) to support */ 2740 __le32 num_vdevs; 2741 2742 /* Number of peer nodes to support */ 2743 __le32 num_peers; 2744 2745 /* Number of active peer nodes to support */ 2746 __le32 num_active_peers; 2747 2748 /* In offload mode, target supports features like WOW, chatter and other 2749 * protocol offloads. In order to support them some functionalities like 2750 * reorder buffering, PN checking need to be done in target. 2751 * This determines maximum number of peers supported by target in 2752 * offload mode. 2753 */ 2754 __le32 num_offload_peers; 2755 2756 /* Number of reorder buffers available for doing target based reorder 2757 * Rx reorder buffering 2758 */ 2759 __le32 num_offload_reorder_buffs; 2760 2761 /* Number of keys per peer */ 2762 __le32 num_peer_keys; 2763 2764 /* Total number of TX/RX data TIDs */ 2765 __le32 num_tids; 2766 2767 /* Max skid for resolving hash collisions. 2768 * The address search table is sparse, so that if two MAC addresses 2769 * result in the same hash value, the second of these conflicting 2770 * entries can slide to the next index in the address search table, 2771 * and use it, if it is unoccupied. This ast_skid_limit parameter 2772 * specifies the upper bound on how many subsequent indices to search 2773 * over to find an unoccupied space. 2774 */ 2775 __le32 ast_skid_limit; 2776 2777 /* The nominal chain mask for transmit. 2778 * The chain mask may be modified dynamically, e.g. to operate AP tx 2779 * with a reduced number of chains if no clients are associated. 2780 * This configuration parameter specifies the nominal chain-mask that 2781 * should be used when not operating with a reduced set of tx chains. 2782 */ 2783 __le32 tx_chain_mask; 2784 2785 /* The nominal chain mask for receive. 2786 * The chain mask may be modified dynamically, e.g. for a client to use 2787 * a reduced number of chains for receive if the traffic to the client 2788 * is low enough that it doesn't require downlink MIMO or antenna 2789 * diversity. This configuration parameter specifies the nominal 2790 * chain-mask that should be used when not operating with a reduced 2791 * set of rx chains. 2792 */ 2793 __le32 rx_chain_mask; 2794 2795 /* What rx reorder timeout (ms) to use for the AC. 2796 * Each WMM access class (voice, video, best-effort, background) will 2797 * have its own timeout value to dictate how long to wait for missing 2798 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2799 * been received. This parameter specifies the timeout in milliseconds 2800 * for each class. 2801 */ 2802 __le32 rx_timeout_pri[4]; 2803 2804 /* What mode the rx should decap packets to. 2805 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2806 * This setting also determines the default TX behavior, however TX 2807 * behavior can be modified on a per VAP basis during VAP init 2808 */ 2809 __le32 rx_decap_mode; 2810 2811 __le32 scan_max_pending_req; 2812 2813 __le32 bmiss_offload_max_vdev; 2814 2815 __le32 roam_offload_max_vdev; 2816 2817 __le32 roam_offload_max_ap_profiles; 2818 2819 /* How many groups to use for mcast->ucast conversion. 2820 * The target's WAL maintains a table to hold information regarding 2821 * which peers belong to a given multicast group, so that if 2822 * multicast->unicast conversion is enabled, the target can convert 2823 * multicast tx frames to a series of unicast tx frames, to each peer 2824 * within the multicast group. This num_mcast_groups configuration 2825 * parameter tells the target how many multicast groups to provide 2826 * storage for within its multicast group membership table. 2827 */ 2828 __le32 num_mcast_groups; 2829 2830 /* Size to alloc for the mcast membership table. 2831 * This num_mcast_table_elems configuration parameter tells the target 2832 * how many peer elements it needs to provide storage for in its 2833 * multicast group membership table. These multicast group membership 2834 * table elements are shared by the multicast groups stored within 2835 * the table. 2836 */ 2837 __le32 num_mcast_table_elems; 2838 2839 /* Whether/how to do multicast->unicast conversion. 2840 * This configuration parameter specifies whether the target should 2841 * perform multicast --> unicast conversion on transmit, and if so, 2842 * what to do if it finds no entries in its multicast group membership 2843 * table for the multicast IP address in the tx frame. 2844 * Configuration value: 2845 * 0 -> Do not perform multicast to unicast conversion. 2846 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2847 * from the tx frame is found in the multicast group membership 2848 * table. If the IP multicast address is not found, drop the frame 2849 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2850 * from the tx frame is found in the multicast group membership 2851 * table. If the IP multicast address is not found, transmit the 2852 * frame as multicast. 2853 */ 2854 __le32 mcast2ucast_mode; 2855 2856 /* How much memory to allocate for a tx PPDU dbg log. 2857 * This parameter controls how much memory the target will allocate to 2858 * store a log of tx PPDU meta-information (how large the PPDU was, 2859 * when it was sent, whether it was successful, etc.) 2860 */ 2861 __le32 tx_dbg_log_size; 2862 2863 /* How many AST entries to be allocated for WDS */ 2864 __le32 num_wds_entries; 2865 2866 /* MAC DMA burst size. 0 -default, 1 -256B */ 2867 __le32 dma_burst_size; 2868 2869 /* Fixed delimiters to be inserted after every MPDU to account for 2870 * interface latency to avoid underrun. 2871 */ 2872 __le32 mac_aggr_delim; 2873 2874 /* Determine whether target is responsible for detecting duplicate 2875 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2876 * is always performed on the target. 2877 * 2878 * 0: target responsible for frag timeout and dup checking 2879 * 1: host responsible for frag timeout and dup checking 2880 */ 2881 __le32 rx_skip_defrag_timeout_dup_detection_check; 2882 2883 /* Configuration for VoW : No of Video nodes to be supported and max 2884 * no of descriptors for each video link (node). 2885 */ 2886 __le32 vow_config; 2887 2888 /* Maximum vdev that could use gtk offload */ 2889 __le32 gtk_offload_max_vdev; 2890 2891 /* Number of msdu descriptors target should use */ 2892 __le32 num_msdu_desc; 2893 2894 /* Max number of tx fragments per MSDU. 2895 * This parameter controls the max number of tx fragments per MSDU. 2896 * This will passed by target as part of the WMI_SERVICE_READY event 2897 * and is overridden by the OS shim as required. 2898 */ 2899 __le32 max_frag_entries; 2900 2901 /* Max number of extended peer stats. 2902 * This parameter controls the max number of peers for which extended 2903 * statistics are supported by target 2904 */ 2905 __le32 max_peer_ext_stats; 2906 2907 /* Smart antenna capabilities information. 2908 * 1 - Smart antenna is enabled 2909 * 0 - Smart antenna is disabled 2910 * In future this can contain smart antenna specific capabilities. 2911 */ 2912 __le32 smart_ant_cap; 2913 2914 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2915 * during init. 2916 */ 2917 __le32 bk_minfree; 2918 __le32 be_minfree; 2919 __le32 vi_minfree; 2920 __le32 vo_minfree; 2921 2922 /* Rx batch mode capability. 2923 * 1 - Rx batch mode enabled 2924 * 0 - Rx batch mode disabled 2925 */ 2926 __le32 rx_batchmode; 2927 2928 /* Thermal throttling capability. 2929 * 1 - Capable of thermal throttling 2930 * 0 - Not capable of thermal throttling 2931 */ 2932 __le32 tt_support; 2933 2934 /* ATF configuration. 2935 * 1 - Enable ATF 2936 * 0 - Disable ATF 2937 */ 2938 __le32 atf_config; 2939 2940 /* Configure padding to manage IP header un-alignment 2941 * 1 - Enable padding 2942 * 0 - Disable padding 2943 */ 2944 __le32 iphdr_pad_config; 2945 2946 /* qwrap configuration (bits 15-0) 2947 * 1 - This is qwrap configuration 2948 * 0 - This is not qwrap 2949 * 2950 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2951 * In order to get ack-RSSI reporting and to specify the tx-rate for 2952 * individual frames, this option must be enabled. This uses an extra 2953 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2954 */ 2955 __le32 qwrap_config; 2956 } __packed; 2957 2958 enum wmi_coex_version { 2959 WMI_NO_COEX_VERSION_SUPPORT = 0, 2960 /* 3 wire coex support*/ 2961 WMI_COEX_VERSION_1 = 1, 2962 /* 2.5 wire coex support*/ 2963 WMI_COEX_VERSION_2 = 2, 2964 /* 2.5 wire coex with duty cycle support */ 2965 WMI_COEX_VERSION_3 = 3, 2966 /* 4 wire coex support*/ 2967 WMI_COEX_VERSION_4 = 4, 2968 }; 2969 2970 /** 2971 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2972 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2973 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2974 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2975 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2976 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2977 * @WMI_10_4_PEER_STATS: Per station stats 2978 * @WMI_10_4_VDEV_STATS: Per vdev stats 2979 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2980 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2981 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2982 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2983 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2984 * enable/disable 2985 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2986 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable 2987 */ 2988 enum wmi_10_4_feature_mask { 2989 WMI_10_4_LTEU_SUPPORT = BIT(0), 2990 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2991 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2992 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2993 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2994 WMI_10_4_PEER_STATS = BIT(5), 2995 WMI_10_4_VDEV_STATS = BIT(6), 2996 WMI_10_4_TDLS = BIT(7), 2997 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2998 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2999 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 3000 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 3001 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 3002 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), 3003 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), 3004 WMI_10_4_REPORT_AIRTIME = BIT(18), 3005 3006 }; 3007 3008 struct wmi_ext_resource_config_10_4_cmd { 3009 /* contains enum wmi_host_platform_type */ 3010 __le32 host_platform_config; 3011 /* see enum wmi_10_4_feature_mask */ 3012 __le32 fw_feature_bitmap; 3013 /* WLAN priority GPIO number */ 3014 __le32 wlan_gpio_priority; 3015 /* see enum wmi_coex_version */ 3016 __le32 coex_version; 3017 /* COEX GPIO config */ 3018 __le32 coex_gpio_pin1; 3019 __le32 coex_gpio_pin2; 3020 __le32 coex_gpio_pin3; 3021 /* number of vdevs allowed to perform tdls */ 3022 __le32 num_tdls_vdevs; 3023 /* number of peers to track per TDLS vdev */ 3024 __le32 num_tdls_conn_table_entries; 3025 /* number of tdls sleep sta supported */ 3026 __le32 max_tdls_concurrent_sleep_sta; 3027 /* number of tdls buffer sta supported */ 3028 __le32 max_tdls_concurrent_buffer_sta; 3029 }; 3030 3031 /* structure describing host memory chunk. */ 3032 struct host_memory_chunk { 3033 /* id of the request that is passed up in service ready */ 3034 __le32 req_id; 3035 /* the physical address the memory chunk */ 3036 __le32 ptr; 3037 /* size of the chunk */ 3038 __le32 size; 3039 } __packed; 3040 3041 struct wmi_host_mem_chunks { 3042 __le32 count; 3043 /* some fw revisions require at least 1 chunk regardless of count */ 3044 struct host_memory_chunk items[1]; 3045 } __packed; 3046 3047 struct wmi_init_cmd { 3048 struct wmi_resource_config resource_config; 3049 struct wmi_host_mem_chunks mem_chunks; 3050 } __packed; 3051 3052 /* _10x structure is from 10.X FW API */ 3053 struct wmi_init_cmd_10x { 3054 struct wmi_resource_config_10x resource_config; 3055 struct wmi_host_mem_chunks mem_chunks; 3056 } __packed; 3057 3058 struct wmi_init_cmd_10_2 { 3059 struct wmi_resource_config_10_2 resource_config; 3060 struct wmi_host_mem_chunks mem_chunks; 3061 } __packed; 3062 3063 struct wmi_init_cmd_10_4 { 3064 struct wmi_resource_config_10_4 resource_config; 3065 struct wmi_host_mem_chunks mem_chunks; 3066 } __packed; 3067 3068 struct wmi_chan_list_entry { 3069 __le16 freq; 3070 u8 phy_mode; /* valid for 10.2 only */ 3071 u8 reserved; 3072 } __packed; 3073 3074 /* TLV for channel list */ 3075 struct wmi_chan_list { 3076 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3077 __le32 num_chan; 3078 struct wmi_chan_list_entry channel_list[0]; 3079 } __packed; 3080 3081 struct wmi_bssid_list { 3082 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3083 __le32 num_bssid; 3084 struct wmi_mac_addr bssid_list[0]; 3085 } __packed; 3086 3087 struct wmi_ie_data { 3088 __le32 tag; /* WMI_IE_TAG */ 3089 __le32 ie_len; 3090 u8 ie_data[0]; 3091 } __packed; 3092 3093 struct wmi_ssid { 3094 __le32 ssid_len; 3095 u8 ssid[32]; 3096 } __packed; 3097 3098 struct wmi_ssid_list { 3099 __le32 tag; /* WMI_SSID_LIST_TAG */ 3100 __le32 num_ssids; 3101 struct wmi_ssid ssids[0]; 3102 } __packed; 3103 3104 /* prefix used by scan requestor ids on the host */ 3105 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3106 3107 /* prefix used by scan request ids generated on the host */ 3108 /* host cycles through the lower 12 bits to generate ids */ 3109 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3110 3111 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3112 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3113 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3114 3115 /* Values lower than this may be refused by some firmware revisions with a scan 3116 * completion with a timedout reason. 3117 */ 3118 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3119 3120 /* Scan priority numbers must be sequential, starting with 0 */ 3121 enum wmi_scan_priority { 3122 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3123 WMI_SCAN_PRIORITY_LOW, 3124 WMI_SCAN_PRIORITY_MEDIUM, 3125 WMI_SCAN_PRIORITY_HIGH, 3126 WMI_SCAN_PRIORITY_VERY_HIGH, 3127 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3128 }; 3129 3130 struct wmi_start_scan_common { 3131 /* Scan ID */ 3132 __le32 scan_id; 3133 /* Scan requestor ID */ 3134 __le32 scan_req_id; 3135 /* VDEV id(interface) that is requesting scan */ 3136 __le32 vdev_id; 3137 /* Scan Priority, input to scan scheduler */ 3138 __le32 scan_priority; 3139 /* Scan events subscription */ 3140 __le32 notify_scan_events; 3141 /* dwell time in msec on active channels */ 3142 __le32 dwell_time_active; 3143 /* dwell time in msec on passive channels */ 3144 __le32 dwell_time_passive; 3145 /* 3146 * min time in msec on the BSS channel,only valid if atleast one 3147 * VDEV is active 3148 */ 3149 __le32 min_rest_time; 3150 /* 3151 * max rest time in msec on the BSS channel,only valid if at least 3152 * one VDEV is active 3153 */ 3154 /* 3155 * the scanner will rest on the bss channel at least min_rest_time 3156 * after min_rest_time the scanner will start checking for tx/rx 3157 * activity on all VDEVs. if there is no activity the scanner will 3158 * switch to off channel. if there is activity the scanner will let 3159 * the radio on the bss channel until max_rest_time expires.at 3160 * max_rest_time scanner will switch to off channel irrespective of 3161 * activity. activity is determined by the idle_time parameter. 3162 */ 3163 __le32 max_rest_time; 3164 /* 3165 * time before sending next set of probe requests. 3166 * The scanner keeps repeating probe requests transmission with 3167 * period specified by repeat_probe_time. 3168 * The number of probe requests specified depends on the ssid_list 3169 * and bssid_list 3170 */ 3171 __le32 repeat_probe_time; 3172 /* time in msec between 2 consequetive probe requests with in a set. */ 3173 __le32 probe_spacing_time; 3174 /* 3175 * data inactivity time in msec on bss channel that will be used by 3176 * scanner for measuring the inactivity. 3177 */ 3178 __le32 idle_time; 3179 /* maximum time in msec allowed for scan */ 3180 __le32 max_scan_time; 3181 /* 3182 * delay in msec before sending first probe request after switching 3183 * to a channel 3184 */ 3185 __le32 probe_delay; 3186 /* Scan control flags */ 3187 __le32 scan_ctrl_flags; 3188 } __packed; 3189 3190 struct wmi_start_scan_tlvs { 3191 /* TLV parameters. These includes channel list, ssid list, bssid list, 3192 * extra ies. 3193 */ 3194 u8 tlvs[0]; 3195 } __packed; 3196 3197 struct wmi_start_scan_cmd { 3198 struct wmi_start_scan_common common; 3199 __le32 burst_duration_ms; 3200 struct wmi_start_scan_tlvs tlvs; 3201 } __packed; 3202 3203 /* This is the definition from 10.X firmware branch */ 3204 struct wmi_10x_start_scan_cmd { 3205 struct wmi_start_scan_common common; 3206 struct wmi_start_scan_tlvs tlvs; 3207 } __packed; 3208 3209 struct wmi_ssid_arg { 3210 int len; 3211 const u8 *ssid; 3212 }; 3213 3214 struct wmi_bssid_arg { 3215 const u8 *bssid; 3216 }; 3217 3218 struct wmi_start_scan_arg { 3219 u32 scan_id; 3220 u32 scan_req_id; 3221 u32 vdev_id; 3222 u32 scan_priority; 3223 u32 notify_scan_events; 3224 u32 dwell_time_active; 3225 u32 dwell_time_passive; 3226 u32 min_rest_time; 3227 u32 max_rest_time; 3228 u32 repeat_probe_time; 3229 u32 probe_spacing_time; 3230 u32 idle_time; 3231 u32 max_scan_time; 3232 u32 probe_delay; 3233 u32 scan_ctrl_flags; 3234 u32 burst_duration_ms; 3235 3236 u32 ie_len; 3237 u32 n_channels; 3238 u32 n_ssids; 3239 u32 n_bssids; 3240 3241 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3242 u16 channels[64]; 3243 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3244 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3245 struct wmi_mac_addr mac_addr; 3246 struct wmi_mac_addr mac_mask; 3247 }; 3248 3249 /* scan control flags */ 3250 3251 /* passively scan all channels including active channels */ 3252 #define WMI_SCAN_FLAG_PASSIVE 0x1 3253 /* add wild card ssid probe request even though ssid_list is specified. */ 3254 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3255 /* add cck rates to rates/xrate ie for the generated probe request */ 3256 #define WMI_SCAN_ADD_CCK_RATES 0x4 3257 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3258 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3259 /* To enable indication of Chan load and Noise floor to host */ 3260 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3261 /* Filter Probe request frames */ 3262 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3263 /* When set, DFS channels will not be scanned */ 3264 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3265 /* Different FW scan engine may choose to bail out on errors. 3266 * Allow the driver to have influence over that. 3267 */ 3268 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3269 3270 /* Use random MAC address for TA for Probe Request frame and add 3271 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3272 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3273 */ 3274 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3275 3276 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3277 #define WMI_SCAN_CLASS_MASK 0xFF000000 3278 3279 enum wmi_stop_scan_type { 3280 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3281 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3282 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3283 }; 3284 3285 struct wmi_stop_scan_cmd { 3286 __le32 scan_req_id; 3287 __le32 scan_id; 3288 __le32 req_type; 3289 __le32 vdev_id; 3290 } __packed; 3291 3292 struct wmi_stop_scan_arg { 3293 u32 req_id; 3294 enum wmi_stop_scan_type req_type; 3295 union { 3296 u32 scan_id; 3297 u32 vdev_id; 3298 } u; 3299 }; 3300 3301 struct wmi_scan_chan_list_cmd { 3302 __le32 num_scan_chans; 3303 struct wmi_channel chan_info[0]; 3304 } __packed; 3305 3306 struct wmi_scan_chan_list_arg { 3307 u32 n_channels; 3308 struct wmi_channel_arg *channels; 3309 }; 3310 3311 enum wmi_bss_filter { 3312 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3313 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3314 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3315 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3316 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3317 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3318 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3319 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3320 }; 3321 3322 enum wmi_scan_event_type { 3323 WMI_SCAN_EVENT_STARTED = BIT(0), 3324 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3325 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3326 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3327 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3328 /* possibly by high-prio scan */ 3329 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3330 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3331 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3332 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3333 WMI_SCAN_EVENT_MAX = BIT(15), 3334 }; 3335 3336 enum wmi_scan_completion_reason { 3337 WMI_SCAN_REASON_COMPLETED, 3338 WMI_SCAN_REASON_CANCELLED, 3339 WMI_SCAN_REASON_PREEMPTED, 3340 WMI_SCAN_REASON_TIMEDOUT, 3341 WMI_SCAN_REASON_INTERNAL_FAILURE, 3342 WMI_SCAN_REASON_MAX, 3343 }; 3344 3345 struct wmi_scan_event { 3346 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3347 __le32 reason; /* %WMI_SCAN_REASON_ */ 3348 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3349 __le32 scan_req_id; 3350 __le32 scan_id; 3351 __le32 vdev_id; 3352 } __packed; 3353 3354 /* 3355 * This defines how much headroom is kept in the 3356 * receive frame between the descriptor and the 3357 * payload, in order for the WMI PHY error and 3358 * management handler to insert header contents. 3359 * 3360 * This is in bytes. 3361 */ 3362 #define WMI_MGMT_RX_HDR_HEADROOM 52 3363 3364 /* 3365 * This event will be used for sending scan results 3366 * as well as rx mgmt frames to the host. The rx buffer 3367 * will be sent as part of this WMI event. It would be a 3368 * good idea to pass all the fields in the RX status 3369 * descriptor up to the host. 3370 */ 3371 struct wmi_mgmt_rx_hdr_v1 { 3372 __le32 channel; 3373 __le32 snr; 3374 __le32 rate; 3375 __le32 phy_mode; 3376 __le32 buf_len; 3377 __le32 status; /* %WMI_RX_STATUS_ */ 3378 } __packed; 3379 3380 struct wmi_mgmt_rx_hdr_v2 { 3381 struct wmi_mgmt_rx_hdr_v1 v1; 3382 __le32 rssi_ctl[4]; 3383 } __packed; 3384 3385 struct wmi_mgmt_rx_event_v1 { 3386 struct wmi_mgmt_rx_hdr_v1 hdr; 3387 u8 buf[0]; 3388 } __packed; 3389 3390 struct wmi_mgmt_rx_event_v2 { 3391 struct wmi_mgmt_rx_hdr_v2 hdr; 3392 u8 buf[0]; 3393 } __packed; 3394 3395 struct wmi_10_4_mgmt_rx_hdr { 3396 __le32 channel; 3397 __le32 snr; 3398 u8 rssi_ctl[4]; 3399 __le32 rate; 3400 __le32 phy_mode; 3401 __le32 buf_len; 3402 __le32 status; 3403 } __packed; 3404 3405 struct wmi_10_4_mgmt_rx_event { 3406 struct wmi_10_4_mgmt_rx_hdr hdr; 3407 u8 buf[0]; 3408 } __packed; 3409 3410 struct wmi_mgmt_rx_ext_info { 3411 __le64 rx_mac_timestamp; 3412 } __packed __aligned(4); 3413 3414 #define WMI_RX_STATUS_OK 0x00 3415 #define WMI_RX_STATUS_ERR_CRC 0x01 3416 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3417 #define WMI_RX_STATUS_ERR_MIC 0x10 3418 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3419 /* Extension data at the end of mgmt frame */ 3420 #define WMI_RX_STATUS_EXT_INFO 0x40 3421 3422 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3423 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3424 #define PHY_ERROR_GEN_RADAR 0x05 3425 3426 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3427 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3428 3429 enum phy_err_type { 3430 PHY_ERROR_UNKNOWN, 3431 PHY_ERROR_SPECTRAL_SCAN, 3432 PHY_ERROR_FALSE_RADAR_EXT, 3433 PHY_ERROR_RADAR 3434 }; 3435 3436 struct wmi_phyerr { 3437 __le32 tsf_timestamp; 3438 __le16 freq1; 3439 __le16 freq2; 3440 u8 rssi_combined; 3441 u8 chan_width_mhz; 3442 u8 phy_err_code; 3443 u8 rsvd0; 3444 __le32 rssi_chains[4]; 3445 __le16 nf_chains[4]; 3446 __le32 buf_len; 3447 u8 buf[0]; 3448 } __packed; 3449 3450 struct wmi_phyerr_event { 3451 __le32 num_phyerrs; 3452 __le32 tsf_l32; 3453 __le32 tsf_u32; 3454 struct wmi_phyerr phyerrs[0]; 3455 } __packed; 3456 3457 struct wmi_10_4_phyerr_event { 3458 __le32 tsf_l32; 3459 __le32 tsf_u32; 3460 __le16 freq1; 3461 __le16 freq2; 3462 u8 rssi_combined; 3463 u8 chan_width_mhz; 3464 u8 phy_err_code; 3465 u8 rsvd0; 3466 __le32 rssi_chains[4]; 3467 __le16 nf_chains[4]; 3468 __le32 phy_err_mask[2]; 3469 __le32 tsf_timestamp; 3470 __le32 buf_len; 3471 u8 buf[0]; 3472 } __packed; 3473 3474 struct wmi_radar_found_info { 3475 __le32 pri_min; 3476 __le32 pri_max; 3477 __le32 width_min; 3478 __le32 width_max; 3479 __le32 sidx_min; 3480 __le32 sidx_max; 3481 } __packed; 3482 3483 enum wmi_radar_confirmation_status { 3484 /* Detected radar was due to SW pulses */ 3485 WMI_SW_RADAR_DETECTED = 0, 3486 3487 WMI_RADAR_DETECTION_FAIL = 1, 3488 3489 /* Real radar detected */ 3490 WMI_HW_RADAR_DETECTED = 2, 3491 }; 3492 3493 #define PHYERR_TLV_SIG 0xBB 3494 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3495 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3496 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3497 3498 struct phyerr_radar_report { 3499 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3500 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3501 } __packed; 3502 3503 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3504 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3505 3506 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3507 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3508 3509 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3510 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3511 3512 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3513 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3514 3515 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3516 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3517 3518 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3519 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3520 3521 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3522 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3523 3524 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3525 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3526 3527 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3528 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3529 3530 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3531 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3532 3533 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3534 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3535 3536 struct phyerr_fft_report { 3537 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3538 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3539 } __packed; 3540 3541 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3542 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3543 3544 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3545 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3546 3547 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3548 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3549 3550 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3551 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3552 3553 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3554 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3555 3556 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3557 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3558 3559 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3560 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3561 3562 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3563 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3564 3565 struct phyerr_tlv { 3566 __le16 len; 3567 u8 tag; 3568 u8 sig; 3569 } __packed; 3570 3571 #define DFS_RSSI_POSSIBLY_FALSE 50 3572 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3573 3574 struct wmi_mgmt_tx_hdr { 3575 __le32 vdev_id; 3576 struct wmi_mac_addr peer_macaddr; 3577 __le32 tx_rate; 3578 __le32 tx_power; 3579 __le32 buf_len; 3580 } __packed; 3581 3582 struct wmi_mgmt_tx_cmd { 3583 struct wmi_mgmt_tx_hdr hdr; 3584 u8 buf[0]; 3585 } __packed; 3586 3587 struct wmi_echo_event { 3588 __le32 value; 3589 } __packed; 3590 3591 struct wmi_echo_cmd { 3592 __le32 value; 3593 } __packed; 3594 3595 struct wmi_pdev_set_regdomain_cmd { 3596 __le32 reg_domain; 3597 __le32 reg_domain_2G; 3598 __le32 reg_domain_5G; 3599 __le32 conformance_test_limit_2G; 3600 __le32 conformance_test_limit_5G; 3601 } __packed; 3602 3603 enum wmi_dfs_region { 3604 /* Uninitialized dfs domain */ 3605 WMI_UNINIT_DFS_DOMAIN = 0, 3606 3607 /* FCC3 dfs domain */ 3608 WMI_FCC_DFS_DOMAIN = 1, 3609 3610 /* ETSI dfs domain */ 3611 WMI_ETSI_DFS_DOMAIN = 2, 3612 3613 /*Japan dfs domain */ 3614 WMI_MKK4_DFS_DOMAIN = 3, 3615 }; 3616 3617 struct wmi_pdev_set_regdomain_cmd_10x { 3618 __le32 reg_domain; 3619 __le32 reg_domain_2G; 3620 __le32 reg_domain_5G; 3621 __le32 conformance_test_limit_2G; 3622 __le32 conformance_test_limit_5G; 3623 3624 /* dfs domain from wmi_dfs_region */ 3625 __le32 dfs_domain; 3626 } __packed; 3627 3628 /* Command to set/unset chip in quiet mode */ 3629 struct wmi_pdev_set_quiet_cmd { 3630 /* period in TUs */ 3631 __le32 period; 3632 3633 /* duration in TUs */ 3634 __le32 duration; 3635 3636 /* offset in TUs */ 3637 __le32 next_start; 3638 3639 /* enable/disable */ 3640 __le32 enabled; 3641 } __packed; 3642 3643 /* 3644 * 802.11g protection mode. 3645 */ 3646 enum ath10k_protmode { 3647 ATH10K_PROT_NONE = 0, /* no protection */ 3648 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3649 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3650 }; 3651 3652 enum wmi_rtscts_profile { 3653 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3654 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3655 WMI_RTSCTS_ACROSS_SW_RETRIES 3656 }; 3657 3658 #define WMI_RTSCTS_ENABLED 1 3659 #define WMI_RTSCTS_SET_MASK 0x0f 3660 #define WMI_RTSCTS_SET_LSB 0 3661 3662 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3663 #define WMI_RTSCTS_PROFILE_LSB 4 3664 3665 enum wmi_beacon_gen_mode { 3666 WMI_BEACON_STAGGERED_MODE = 0, 3667 WMI_BEACON_BURST_MODE = 1 3668 }; 3669 3670 enum wmi_csa_event_ies_present_flag { 3671 WMI_CSA_IE_PRESENT = 0x00000001, 3672 WMI_XCSA_IE_PRESENT = 0x00000002, 3673 WMI_WBW_IE_PRESENT = 0x00000004, 3674 WMI_CSWARP_IE_PRESENT = 0x00000008, 3675 }; 3676 3677 /* wmi CSA receive event from beacon frame */ 3678 struct wmi_csa_event { 3679 __le32 i_fc_dur; 3680 /* Bit 0-15: FC */ 3681 /* Bit 16-31: DUR */ 3682 struct wmi_mac_addr i_addr1; 3683 struct wmi_mac_addr i_addr2; 3684 __le32 csa_ie[2]; 3685 __le32 xcsa_ie[2]; 3686 __le32 wb_ie[2]; 3687 __le32 cswarp_ie; 3688 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3689 } __packed; 3690 3691 /* the definition of different PDEV parameters */ 3692 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3693 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3694 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3695 3696 struct wmi_pdev_param_map { 3697 u32 tx_chain_mask; 3698 u32 rx_chain_mask; 3699 u32 txpower_limit2g; 3700 u32 txpower_limit5g; 3701 u32 txpower_scale; 3702 u32 beacon_gen_mode; 3703 u32 beacon_tx_mode; 3704 u32 resmgr_offchan_mode; 3705 u32 protection_mode; 3706 u32 dynamic_bw; 3707 u32 non_agg_sw_retry_th; 3708 u32 agg_sw_retry_th; 3709 u32 sta_kickout_th; 3710 u32 ac_aggrsize_scaling; 3711 u32 ltr_enable; 3712 u32 ltr_ac_latency_be; 3713 u32 ltr_ac_latency_bk; 3714 u32 ltr_ac_latency_vi; 3715 u32 ltr_ac_latency_vo; 3716 u32 ltr_ac_latency_timeout; 3717 u32 ltr_sleep_override; 3718 u32 ltr_rx_override; 3719 u32 ltr_tx_activity_timeout; 3720 u32 l1ss_enable; 3721 u32 dsleep_enable; 3722 u32 pcielp_txbuf_flush; 3723 u32 pcielp_txbuf_watermark; 3724 u32 pcielp_txbuf_tmo_en; 3725 u32 pcielp_txbuf_tmo_value; 3726 u32 pdev_stats_update_period; 3727 u32 vdev_stats_update_period; 3728 u32 peer_stats_update_period; 3729 u32 bcnflt_stats_update_period; 3730 u32 pmf_qos; 3731 u32 arp_ac_override; 3732 u32 dcs; 3733 u32 ani_enable; 3734 u32 ani_poll_period; 3735 u32 ani_listen_period; 3736 u32 ani_ofdm_level; 3737 u32 ani_cck_level; 3738 u32 dyntxchain; 3739 u32 proxy_sta; 3740 u32 idle_ps_config; 3741 u32 power_gating_sleep; 3742 u32 fast_channel_reset; 3743 u32 burst_dur; 3744 u32 burst_enable; 3745 u32 cal_period; 3746 u32 aggr_burst; 3747 u32 rx_decap_mode; 3748 u32 smart_antenna_default_antenna; 3749 u32 igmpmld_override; 3750 u32 igmpmld_tid; 3751 u32 antenna_gain; 3752 u32 rx_filter; 3753 u32 set_mcast_to_ucast_tid; 3754 u32 proxy_sta_mode; 3755 u32 set_mcast2ucast_mode; 3756 u32 set_mcast2ucast_buffer; 3757 u32 remove_mcast2ucast_buffer; 3758 u32 peer_sta_ps_statechg_enable; 3759 u32 igmpmld_ac_override; 3760 u32 block_interbss; 3761 u32 set_disable_reset_cmdid; 3762 u32 set_msdu_ttl_cmdid; 3763 u32 set_ppdu_duration_cmdid; 3764 u32 txbf_sound_period_cmdid; 3765 u32 set_promisc_mode_cmdid; 3766 u32 set_burst_mode_cmdid; 3767 u32 en_stats; 3768 u32 mu_group_policy; 3769 u32 noise_detection; 3770 u32 noise_threshold; 3771 u32 dpd_enable; 3772 u32 set_mcast_bcast_echo; 3773 u32 atf_strict_sch; 3774 u32 atf_sched_duration; 3775 u32 ant_plzn; 3776 u32 mgmt_retry_limit; 3777 u32 sensitivity_level; 3778 u32 signed_txpower_2g; 3779 u32 signed_txpower_5g; 3780 u32 enable_per_tid_amsdu; 3781 u32 enable_per_tid_ampdu; 3782 u32 cca_threshold; 3783 u32 rts_fixed_rate; 3784 u32 pdev_reset; 3785 u32 wapi_mbssid_offset; 3786 u32 arp_srcaddr; 3787 u32 arp_dstaddr; 3788 u32 enable_btcoex; 3789 }; 3790 3791 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3792 3793 enum wmi_pdev_param { 3794 /* TX chain mask */ 3795 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3796 /* RX chain mask */ 3797 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3798 /* TX power limit for 2G Radio */ 3799 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3800 /* TX power limit for 5G Radio */ 3801 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3802 /* TX power scale */ 3803 WMI_PDEV_PARAM_TXPOWER_SCALE, 3804 /* Beacon generation mode . 0: host, 1: target */ 3805 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3806 /* Beacon generation mode . 0: staggered 1: bursted */ 3807 WMI_PDEV_PARAM_BEACON_TX_MODE, 3808 /* 3809 * Resource manager off chan mode . 3810 * 0: turn off off chan mode. 1: turn on offchan mode 3811 */ 3812 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3813 /* 3814 * Protection mode: 3815 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3816 */ 3817 WMI_PDEV_PARAM_PROTECTION_MODE, 3818 /* 3819 * Dynamic bandwidth - 0: disable, 1: enable 3820 * 3821 * When enabled HW rate control tries different bandwidths when 3822 * retransmitting frames. 3823 */ 3824 WMI_PDEV_PARAM_DYNAMIC_BW, 3825 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3826 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3827 /* aggregrate sw retry threshold. 0-disable*/ 3828 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3829 /* Station kickout threshold (non of consecutive failures).0-disable */ 3830 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3831 /* Aggerate size scaling configuration per AC */ 3832 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3833 /* LTR enable */ 3834 WMI_PDEV_PARAM_LTR_ENABLE, 3835 /* LTR latency for BE, in us */ 3836 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3837 /* LTR latency for BK, in us */ 3838 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3839 /* LTR latency for VI, in us */ 3840 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3841 /* LTR latency for VO, in us */ 3842 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3843 /* LTR AC latency timeout, in ms */ 3844 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3845 /* LTR platform latency override, in us */ 3846 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3847 /* LTR-RX override, in us */ 3848 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3849 /* Tx activity timeout for LTR, in us */ 3850 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3851 /* L1SS state machine enable */ 3852 WMI_PDEV_PARAM_L1SS_ENABLE, 3853 /* Deep sleep state machine enable */ 3854 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3855 /* RX buffering flush enable */ 3856 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3857 /* RX buffering matermark */ 3858 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3859 /* RX buffering timeout enable */ 3860 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3861 /* RX buffering timeout value */ 3862 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3863 /* pdev level stats update period in ms */ 3864 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3865 /* vdev level stats update period in ms */ 3866 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3867 /* peer level stats update period in ms */ 3868 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3869 /* beacon filter status update period */ 3870 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3871 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3872 WMI_PDEV_PARAM_PMF_QOS, 3873 /* Access category on which ARP frames are sent */ 3874 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3875 /* DCS configuration */ 3876 WMI_PDEV_PARAM_DCS, 3877 /* Enable/Disable ANI on target */ 3878 WMI_PDEV_PARAM_ANI_ENABLE, 3879 /* configure the ANI polling period */ 3880 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3881 /* configure the ANI listening period */ 3882 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3883 /* configure OFDM immunity level */ 3884 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3885 /* configure CCK immunity level */ 3886 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3887 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3888 WMI_PDEV_PARAM_DYNTXCHAIN, 3889 /* Enable/Disable proxy STA */ 3890 WMI_PDEV_PARAM_PROXY_STA, 3891 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3892 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3893 /* Enable/Disable power gating sleep */ 3894 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3895 }; 3896 3897 enum wmi_10x_pdev_param { 3898 /* TX chian mask */ 3899 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3900 /* RX chian mask */ 3901 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3902 /* TX power limit for 2G Radio */ 3903 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3904 /* TX power limit for 5G Radio */ 3905 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3906 /* TX power scale */ 3907 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3908 /* Beacon generation mode . 0: host, 1: target */ 3909 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3910 /* Beacon generation mode . 0: staggered 1: bursted */ 3911 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3912 /* 3913 * Resource manager off chan mode . 3914 * 0: turn off off chan mode. 1: turn on offchan mode 3915 */ 3916 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3917 /* 3918 * Protection mode: 3919 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3920 */ 3921 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3922 /* Dynamic bandwidth 0: disable 1: enable */ 3923 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3924 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3925 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3926 /* aggregrate sw retry threshold. 0-disable*/ 3927 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3928 /* Station kickout threshold (non of consecutive failures).0-disable */ 3929 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3930 /* Aggerate size scaling configuration per AC */ 3931 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3932 /* LTR enable */ 3933 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3934 /* LTR latency for BE, in us */ 3935 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3936 /* LTR latency for BK, in us */ 3937 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3938 /* LTR latency for VI, in us */ 3939 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3940 /* LTR latency for VO, in us */ 3941 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3942 /* LTR AC latency timeout, in ms */ 3943 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3944 /* LTR platform latency override, in us */ 3945 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3946 /* LTR-RX override, in us */ 3947 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3948 /* Tx activity timeout for LTR, in us */ 3949 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3950 /* L1SS state machine enable */ 3951 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3952 /* Deep sleep state machine enable */ 3953 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3954 /* pdev level stats update period in ms */ 3955 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3956 /* vdev level stats update period in ms */ 3957 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3958 /* peer level stats update period in ms */ 3959 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3960 /* beacon filter status update period */ 3961 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3962 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3963 WMI_10X_PDEV_PARAM_PMF_QOS, 3964 /* Access category on which ARP and DHCP frames are sent */ 3965 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3966 /* DCS configuration */ 3967 WMI_10X_PDEV_PARAM_DCS, 3968 /* Enable/Disable ANI on target */ 3969 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3970 /* configure the ANI polling period */ 3971 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3972 /* configure the ANI listening period */ 3973 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3974 /* configure OFDM immunity level */ 3975 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3976 /* configure CCK immunity level */ 3977 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3978 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3979 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3980 /* Enable/Disable Fast channel reset*/ 3981 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3982 /* Set Bursting DUR */ 3983 WMI_10X_PDEV_PARAM_BURST_DUR, 3984 /* Set Bursting Enable*/ 3985 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3986 3987 /* following are available as of firmware 10.2 */ 3988 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3989 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3990 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3991 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3992 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3993 WMI_10X_PDEV_PARAM_RX_FILTER, 3994 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3995 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3996 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3997 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3998 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3999 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 4000 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 4001 WMI_10X_PDEV_PARAM_CAL_PERIOD, 4002 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 4003 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 4004 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4005 WMI_10X_PDEV_PARAM_PDEV_RESET 4006 }; 4007 4008 enum wmi_10_4_pdev_param { 4009 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 4010 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 4011 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 4012 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 4013 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 4014 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 4015 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 4016 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 4017 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 4018 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 4019 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 4020 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 4021 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 4022 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 4023 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 4024 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 4025 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 4026 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 4027 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 4028 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 4029 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 4030 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 4031 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 4032 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 4033 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 4034 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 4035 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 4036 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 4037 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 4038 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 4039 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 4040 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 4041 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 4042 WMI_10_4_PDEV_PARAM_PMF_QOS, 4043 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 4044 WMI_10_4_PDEV_PARAM_DCS, 4045 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 4046 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 4047 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 4048 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 4049 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 4050 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 4051 WMI_10_4_PDEV_PARAM_PROXY_STA, 4052 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 4053 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 4054 WMI_10_4_PDEV_PARAM_AGGR_BURST, 4055 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 4056 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 4057 WMI_10_4_PDEV_PARAM_BURST_DUR, 4058 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 4059 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4060 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 4061 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 4062 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4063 WMI_10_4_PDEV_PARAM_RX_FILTER, 4064 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4065 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4066 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4067 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4068 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4069 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4070 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4071 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4072 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4073 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4074 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4075 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4076 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4077 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4078 WMI_10_4_PDEV_PARAM_EN_STATS, 4079 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4080 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4081 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4082 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4083 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4084 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4085 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4086 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4087 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4088 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4089 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4090 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4091 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4092 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4093 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4094 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4095 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4096 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4097 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4098 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4099 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4100 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4101 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4102 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4103 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4104 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4105 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4106 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4107 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4108 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4109 }; 4110 4111 struct wmi_pdev_set_param_cmd { 4112 __le32 param_id; 4113 __le32 param_value; 4114 } __packed; 4115 4116 struct wmi_pdev_set_base_macaddr_cmd { 4117 struct wmi_mac_addr mac_addr; 4118 } __packed; 4119 4120 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4121 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4122 4123 struct wmi_pdev_get_tpc_config_cmd { 4124 /* parameter */ 4125 __le32 param; 4126 } __packed; 4127 4128 #define WMI_TPC_CONFIG_PARAM 1 4129 #define WMI_TPC_FINAL_RATE_MAX 240 4130 #define WMI_TPC_TX_N_CHAIN 4 4131 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4132 #define WMI_TPC_PREAM_TABLE_MAX 10 4133 #define WMI_TPC_FLAG 3 4134 #define WMI_TPC_BUF_SIZE 10 4135 #define WMI_TPC_BEAMFORMING 2 4136 4137 enum wmi_tpc_table_type { 4138 WMI_TPC_TABLE_TYPE_CDD = 0, 4139 WMI_TPC_TABLE_TYPE_STBC = 1, 4140 WMI_TPC_TABLE_TYPE_TXBF = 2, 4141 }; 4142 4143 enum wmi_tpc_config_event_flag { 4144 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4145 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4146 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4147 }; 4148 4149 struct wmi_pdev_tpc_config_event { 4150 __le32 reg_domain; 4151 __le32 chan_freq; 4152 __le32 phy_mode; 4153 __le32 twice_antenna_reduction; 4154 __le32 twice_max_rd_power; 4155 a_sle32 twice_antenna_gain; 4156 __le32 power_limit; 4157 __le32 rate_max; 4158 __le32 num_tx_chain; 4159 __le32 ctl; 4160 __le32 flags; 4161 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4162 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4163 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4164 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4165 u8 rates_array[WMI_TPC_RATE_MAX]; 4166 } __packed; 4167 4168 /* Transmit power scale factor. */ 4169 enum wmi_tp_scale { 4170 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4171 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4172 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4173 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4174 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4175 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4176 }; 4177 4178 struct wmi_pdev_tpc_final_table_event { 4179 __le32 reg_domain; 4180 __le32 chan_freq; 4181 __le32 phy_mode; 4182 __le32 twice_antenna_reduction; 4183 __le32 twice_max_rd_power; 4184 a_sle32 twice_antenna_gain; 4185 __le32 power_limit; 4186 __le32 rate_max; 4187 __le32 num_tx_chain; 4188 __le32 ctl; 4189 __le32 flags; 4190 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4191 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4192 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4193 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4194 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4195 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4196 [WMI_TPC_TX_N_CHAIN]; 4197 } __packed; 4198 4199 struct wmi_pdev_get_tpc_table_cmd { 4200 __le32 param; 4201 } __packed; 4202 4203 enum wmi_tpc_pream_2ghz { 4204 WMI_TPC_PREAM_2GHZ_CCK = 0, 4205 WMI_TPC_PREAM_2GHZ_OFDM, 4206 WMI_TPC_PREAM_2GHZ_HT20, 4207 WMI_TPC_PREAM_2GHZ_HT40, 4208 WMI_TPC_PREAM_2GHZ_VHT20, 4209 WMI_TPC_PREAM_2GHZ_VHT40, 4210 WMI_TPC_PREAM_2GHZ_VHT80, 4211 }; 4212 4213 enum wmi_tpc_pream_5ghz { 4214 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4215 WMI_TPC_PREAM_5GHZ_HT20, 4216 WMI_TPC_PREAM_5GHZ_HT40, 4217 WMI_TPC_PREAM_5GHZ_VHT20, 4218 WMI_TPC_PREAM_5GHZ_VHT40, 4219 WMI_TPC_PREAM_5GHZ_VHT80, 4220 WMI_TPC_PREAM_5GHZ_HTCUP, 4221 }; 4222 4223 #define WMI_PEER_PS_STATE_DISABLED 2 4224 4225 struct wmi_peer_sta_ps_state_chg_event { 4226 struct wmi_mac_addr peer_macaddr; 4227 __le32 peer_ps_state; 4228 } __packed; 4229 4230 struct wmi_pdev_chanlist_update_event { 4231 /* number of channels */ 4232 __le32 num_chan; 4233 /* array of channels */ 4234 struct wmi_channel channel_list[1]; 4235 } __packed; 4236 4237 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4238 4239 struct wmi_debug_mesg_event { 4240 /* message buffer, NULL terminated */ 4241 char bufp[WMI_MAX_DEBUG_MESG]; 4242 } __packed; 4243 4244 enum { 4245 /* P2P device */ 4246 VDEV_SUBTYPE_P2PDEV = 0, 4247 /* P2P client */ 4248 VDEV_SUBTYPE_P2PCLI, 4249 /* P2P GO */ 4250 VDEV_SUBTYPE_P2PGO, 4251 /* BT3.0 HS */ 4252 VDEV_SUBTYPE_BT, 4253 }; 4254 4255 struct wmi_pdev_set_channel_cmd { 4256 /* idnore power , only use flags , mode and freq */ 4257 struct wmi_channel chan; 4258 } __packed; 4259 4260 struct wmi_pdev_pktlog_enable_cmd { 4261 __le32 ev_bitmap; 4262 } __packed; 4263 4264 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4265 #define WMI_DSCP_MAP_MAX (64) 4266 struct wmi_pdev_set_dscp_tid_map_cmd { 4267 /* map indicating DSCP to TID conversion */ 4268 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4269 } __packed; 4270 4271 enum mcast_bcast_rate_id { 4272 WMI_SET_MCAST_RATE, 4273 WMI_SET_BCAST_RATE 4274 }; 4275 4276 struct mcast_bcast_rate { 4277 enum mcast_bcast_rate_id rate_id; 4278 __le32 rate; 4279 } __packed; 4280 4281 struct wmi_wmm_params { 4282 __le32 cwmin; 4283 __le32 cwmax; 4284 __le32 aifs; 4285 __le32 txop; 4286 __le32 acm; 4287 __le32 no_ack; 4288 } __packed; 4289 4290 struct wmi_pdev_set_wmm_params { 4291 struct wmi_wmm_params ac_be; 4292 struct wmi_wmm_params ac_bk; 4293 struct wmi_wmm_params ac_vi; 4294 struct wmi_wmm_params ac_vo; 4295 } __packed; 4296 4297 struct wmi_wmm_params_arg { 4298 u32 cwmin; 4299 u32 cwmax; 4300 u32 aifs; 4301 u32 txop; 4302 u32 acm; 4303 u32 no_ack; 4304 }; 4305 4306 struct wmi_wmm_params_all_arg { 4307 struct wmi_wmm_params_arg ac_be; 4308 struct wmi_wmm_params_arg ac_bk; 4309 struct wmi_wmm_params_arg ac_vi; 4310 struct wmi_wmm_params_arg ac_vo; 4311 }; 4312 4313 struct wmi_pdev_stats_tx { 4314 /* Num HTT cookies queued to dispatch list */ 4315 __le32 comp_queued; 4316 4317 /* Num HTT cookies dispatched */ 4318 __le32 comp_delivered; 4319 4320 /* Num MSDU queued to WAL */ 4321 __le32 msdu_enqued; 4322 4323 /* Num MPDU queue to WAL */ 4324 __le32 mpdu_enqued; 4325 4326 /* Num MSDUs dropped by WMM limit */ 4327 __le32 wmm_drop; 4328 4329 /* Num Local frames queued */ 4330 __le32 local_enqued; 4331 4332 /* Num Local frames done */ 4333 __le32 local_freed; 4334 4335 /* Num queued to HW */ 4336 __le32 hw_queued; 4337 4338 /* Num PPDU reaped from HW */ 4339 __le32 hw_reaped; 4340 4341 /* Num underruns */ 4342 __le32 underrun; 4343 4344 /* Num PPDUs cleaned up in TX abort */ 4345 __le32 tx_abort; 4346 4347 /* Num MPDUs requed by SW */ 4348 __le32 mpdus_requed; 4349 4350 /* excessive retries */ 4351 __le32 tx_ko; 4352 4353 /* data hw rate code */ 4354 __le32 data_rc; 4355 4356 /* Scheduler self triggers */ 4357 __le32 self_triggers; 4358 4359 /* frames dropped due to excessive sw retries */ 4360 __le32 sw_retry_failure; 4361 4362 /* illegal rate phy errors */ 4363 __le32 illgl_rate_phy_err; 4364 4365 /* wal pdev continuous xretry */ 4366 __le32 pdev_cont_xretry; 4367 4368 /* wal pdev continous xretry */ 4369 __le32 pdev_tx_timeout; 4370 4371 /* wal pdev resets */ 4372 __le32 pdev_resets; 4373 4374 /* frames dropped due to non-availability of stateless TIDs */ 4375 __le32 stateless_tid_alloc_failure; 4376 4377 __le32 phy_underrun; 4378 4379 /* MPDU is more than txop limit */ 4380 __le32 txop_ovf; 4381 } __packed; 4382 4383 struct wmi_10_4_pdev_stats_tx { 4384 /* Num HTT cookies queued to dispatch list */ 4385 __le32 comp_queued; 4386 4387 /* Num HTT cookies dispatched */ 4388 __le32 comp_delivered; 4389 4390 /* Num MSDU queued to WAL */ 4391 __le32 msdu_enqued; 4392 4393 /* Num MPDU queue to WAL */ 4394 __le32 mpdu_enqued; 4395 4396 /* Num MSDUs dropped by WMM limit */ 4397 __le32 wmm_drop; 4398 4399 /* Num Local frames queued */ 4400 __le32 local_enqued; 4401 4402 /* Num Local frames done */ 4403 __le32 local_freed; 4404 4405 /* Num queued to HW */ 4406 __le32 hw_queued; 4407 4408 /* Num PPDU reaped from HW */ 4409 __le32 hw_reaped; 4410 4411 /* Num underruns */ 4412 __le32 underrun; 4413 4414 /* HW Paused. */ 4415 __le32 hw_paused; 4416 4417 /* Num PPDUs cleaned up in TX abort */ 4418 __le32 tx_abort; 4419 4420 /* Num MPDUs requed by SW */ 4421 __le32 mpdus_requed; 4422 4423 /* excessive retries */ 4424 __le32 tx_ko; 4425 4426 /* data hw rate code */ 4427 __le32 data_rc; 4428 4429 /* Scheduler self triggers */ 4430 __le32 self_triggers; 4431 4432 /* frames dropped due to excessive sw retries */ 4433 __le32 sw_retry_failure; 4434 4435 /* illegal rate phy errors */ 4436 __le32 illgl_rate_phy_err; 4437 4438 /* wal pdev continuous xretry */ 4439 __le32 pdev_cont_xretry; 4440 4441 /* wal pdev tx timeouts */ 4442 __le32 pdev_tx_timeout; 4443 4444 /* wal pdev resets */ 4445 __le32 pdev_resets; 4446 4447 /* frames dropped due to non-availability of stateless TIDs */ 4448 __le32 stateless_tid_alloc_failure; 4449 4450 __le32 phy_underrun; 4451 4452 /* MPDU is more than txop limit */ 4453 __le32 txop_ovf; 4454 4455 /* Number of Sequences posted */ 4456 __le32 seq_posted; 4457 4458 /* Number of Sequences failed queueing */ 4459 __le32 seq_failed_queueing; 4460 4461 /* Number of Sequences completed */ 4462 __le32 seq_completed; 4463 4464 /* Number of Sequences restarted */ 4465 __le32 seq_restarted; 4466 4467 /* Number of MU Sequences posted */ 4468 __le32 mu_seq_posted; 4469 4470 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4471 __le32 mpdus_sw_flush; 4472 4473 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4474 __le32 mpdus_hw_filter; 4475 4476 /* Num MPDUs truncated by PDG 4477 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4478 */ 4479 __le32 mpdus_truncated; 4480 4481 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4482 __le32 mpdus_ack_failed; 4483 4484 /* Num MPDUs that was dropped due to expiry. */ 4485 __le32 mpdus_expired; 4486 } __packed; 4487 4488 struct wmi_pdev_stats_rx { 4489 /* Cnts any change in ring routing mid-ppdu */ 4490 __le32 mid_ppdu_route_change; 4491 4492 /* Total number of statuses processed */ 4493 __le32 status_rcvd; 4494 4495 /* Extra frags on rings 0-3 */ 4496 __le32 r0_frags; 4497 __le32 r1_frags; 4498 __le32 r2_frags; 4499 __le32 r3_frags; 4500 4501 /* MSDUs / MPDUs delivered to HTT */ 4502 __le32 htt_msdus; 4503 __le32 htt_mpdus; 4504 4505 /* MSDUs / MPDUs delivered to local stack */ 4506 __le32 loc_msdus; 4507 __le32 loc_mpdus; 4508 4509 /* AMSDUs that have more MSDUs than the status ring size */ 4510 __le32 oversize_amsdu; 4511 4512 /* Number of PHY errors */ 4513 __le32 phy_errs; 4514 4515 /* Number of PHY errors drops */ 4516 __le32 phy_err_drop; 4517 4518 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4519 __le32 mpdu_errs; 4520 } __packed; 4521 4522 struct wmi_pdev_stats_peer { 4523 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4524 __le32 dummy; 4525 } __packed; 4526 4527 enum wmi_stats_id { 4528 WMI_STAT_PEER = BIT(0), 4529 WMI_STAT_AP = BIT(1), 4530 WMI_STAT_PDEV = BIT(2), 4531 WMI_STAT_VDEV = BIT(3), 4532 WMI_STAT_BCNFLT = BIT(4), 4533 WMI_STAT_VDEV_RATE = BIT(5), 4534 }; 4535 4536 enum wmi_10_4_stats_id { 4537 WMI_10_4_STAT_PEER = BIT(0), 4538 WMI_10_4_STAT_AP = BIT(1), 4539 WMI_10_4_STAT_INST = BIT(2), 4540 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4541 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4542 }; 4543 4544 enum wmi_tlv_stats_id { 4545 WMI_TLV_STAT_PEER = BIT(0), 4546 WMI_TLV_STAT_AP = BIT(1), 4547 WMI_TLV_STAT_PDEV = BIT(2), 4548 WMI_TLV_STAT_VDEV = BIT(3), 4549 WMI_TLV_STAT_PEER_EXTD = BIT(10), 4550 }; 4551 4552 struct wlan_inst_rssi_args { 4553 __le16 cfg_retry_count; 4554 __le16 retry_count; 4555 }; 4556 4557 struct wmi_request_stats_cmd { 4558 __le32 stats_id; 4559 4560 __le32 vdev_id; 4561 4562 /* peer MAC address */ 4563 struct wmi_mac_addr peer_macaddr; 4564 4565 /* Instantaneous RSSI arguments */ 4566 struct wlan_inst_rssi_args inst_rssi_args; 4567 } __packed; 4568 4569 /* Suspend option */ 4570 enum { 4571 /* suspend */ 4572 WMI_PDEV_SUSPEND, 4573 4574 /* suspend and disable all interrupts */ 4575 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4576 }; 4577 4578 struct wmi_pdev_suspend_cmd { 4579 /* suspend option sent to target */ 4580 __le32 suspend_opt; 4581 } __packed; 4582 4583 struct wmi_stats_event { 4584 __le32 stats_id; /* WMI_STAT_ */ 4585 /* 4586 * number of pdev stats event structures 4587 * (wmi_pdev_stats) 0 or 1 4588 */ 4589 __le32 num_pdev_stats; 4590 /* 4591 * number of vdev stats event structures 4592 * (wmi_vdev_stats) 0 or max vdevs 4593 */ 4594 __le32 num_vdev_stats; 4595 /* 4596 * number of peer stats event structures 4597 * (wmi_peer_stats) 0 or max peers 4598 */ 4599 __le32 num_peer_stats; 4600 __le32 num_bcnflt_stats; 4601 /* 4602 * followed by 4603 * num_pdev_stats * size of(struct wmi_pdev_stats) 4604 * num_vdev_stats * size of(struct wmi_vdev_stats) 4605 * num_peer_stats * size of(struct wmi_peer_stats) 4606 * 4607 * By having a zero sized array, the pointer to data area 4608 * becomes available without increasing the struct size 4609 */ 4610 u8 data[0]; 4611 } __packed; 4612 4613 struct wmi_10_2_stats_event { 4614 __le32 stats_id; /* %WMI_REQUEST_ */ 4615 __le32 num_pdev_stats; 4616 __le32 num_pdev_ext_stats; 4617 __le32 num_vdev_stats; 4618 __le32 num_peer_stats; 4619 __le32 num_bcnflt_stats; 4620 u8 data[0]; 4621 } __packed; 4622 4623 /* 4624 * PDEV statistics 4625 * TODO: add all PDEV stats here 4626 */ 4627 struct wmi_pdev_stats_base { 4628 __le32 chan_nf; 4629 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4630 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4631 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4632 __le32 cycle_count; /* Total on-channel time */ 4633 __le32 phy_err_count; 4634 __le32 chan_tx_pwr; 4635 } __packed; 4636 4637 struct wmi_pdev_stats { 4638 struct wmi_pdev_stats_base base; 4639 struct wmi_pdev_stats_tx tx; 4640 struct wmi_pdev_stats_rx rx; 4641 struct wmi_pdev_stats_peer peer; 4642 } __packed; 4643 4644 struct wmi_pdev_stats_extra { 4645 __le32 ack_rx_bad; 4646 __le32 rts_bad; 4647 __le32 rts_good; 4648 __le32 fcs_bad; 4649 __le32 no_beacons; 4650 __le32 mib_int_count; 4651 } __packed; 4652 4653 struct wmi_10x_pdev_stats { 4654 struct wmi_pdev_stats_base base; 4655 struct wmi_pdev_stats_tx tx; 4656 struct wmi_pdev_stats_rx rx; 4657 struct wmi_pdev_stats_peer peer; 4658 struct wmi_pdev_stats_extra extra; 4659 } __packed; 4660 4661 struct wmi_pdev_stats_mem { 4662 __le32 dram_free; 4663 __le32 iram_free; 4664 } __packed; 4665 4666 struct wmi_10_2_pdev_stats { 4667 struct wmi_pdev_stats_base base; 4668 struct wmi_pdev_stats_tx tx; 4669 __le32 mc_drop; 4670 struct wmi_pdev_stats_rx rx; 4671 __le32 pdev_rx_timeout; 4672 struct wmi_pdev_stats_mem mem; 4673 struct wmi_pdev_stats_peer peer; 4674 struct wmi_pdev_stats_extra extra; 4675 } __packed; 4676 4677 struct wmi_10_4_pdev_stats { 4678 struct wmi_pdev_stats_base base; 4679 struct wmi_10_4_pdev_stats_tx tx; 4680 struct wmi_pdev_stats_rx rx; 4681 __le32 rx_ovfl_errs; 4682 struct wmi_pdev_stats_mem mem; 4683 __le32 sram_free_size; 4684 struct wmi_pdev_stats_extra extra; 4685 } __packed; 4686 4687 /* 4688 * VDEV statistics 4689 */ 4690 4691 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4692 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4693 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4694 4695 struct wmi_vdev_stats { 4696 __le32 vdev_id; 4697 } __packed; 4698 4699 struct wmi_vdev_stats_extd { 4700 __le32 vdev_id; 4701 __le32 ppdu_aggr_cnt; 4702 __le32 ppdu_noack; 4703 __le32 mpdu_queued; 4704 __le32 ppdu_nonaggr_cnt; 4705 __le32 mpdu_sw_requeued; 4706 __le32 mpdu_suc_retry; 4707 __le32 mpdu_suc_multitry; 4708 __le32 mpdu_fail_retry; 4709 __le32 tx_ftm_suc; 4710 __le32 tx_ftm_suc_retry; 4711 __le32 tx_ftm_fail; 4712 __le32 rx_ftmr_cnt; 4713 __le32 rx_ftmr_dup_cnt; 4714 __le32 rx_iftmr_cnt; 4715 __le32 rx_iftmr_dup_cnt; 4716 __le32 reserved[6]; 4717 } __packed; 4718 4719 /* 4720 * peer statistics. 4721 * TODO: add more stats 4722 */ 4723 struct wmi_peer_stats { 4724 struct wmi_mac_addr peer_macaddr; 4725 __le32 peer_rssi; 4726 __le32 peer_tx_rate; 4727 } __packed; 4728 4729 struct wmi_10x_peer_stats { 4730 struct wmi_peer_stats old; 4731 __le32 peer_rx_rate; 4732 } __packed; 4733 4734 struct wmi_10_2_peer_stats { 4735 struct wmi_peer_stats old; 4736 __le32 peer_rx_rate; 4737 __le32 current_per; 4738 __le32 retries; 4739 __le32 tx_rate_count; 4740 __le32 max_4ms_frame_len; 4741 __le32 total_sub_frames; 4742 __le32 tx_bytes; 4743 __le32 num_pkt_loss_overflow[4]; 4744 __le32 num_pkt_loss_excess_retry[4]; 4745 } __packed; 4746 4747 struct wmi_10_2_4_peer_stats { 4748 struct wmi_10_2_peer_stats common; 4749 __le32 peer_rssi_changed; 4750 } __packed; 4751 4752 struct wmi_10_2_4_ext_peer_stats { 4753 struct wmi_10_2_peer_stats common; 4754 __le32 peer_rssi_changed; 4755 __le32 rx_duration; 4756 } __packed; 4757 4758 struct wmi_10_4_peer_stats { 4759 struct wmi_mac_addr peer_macaddr; 4760 __le32 peer_rssi; 4761 __le32 peer_rssi_seq_num; 4762 __le32 peer_tx_rate; 4763 __le32 peer_rx_rate; 4764 __le32 current_per; 4765 __le32 retries; 4766 __le32 tx_rate_count; 4767 __le32 max_4ms_frame_len; 4768 __le32 total_sub_frames; 4769 __le32 tx_bytes; 4770 __le32 num_pkt_loss_overflow[4]; 4771 __le32 num_pkt_loss_excess_retry[4]; 4772 __le32 peer_rssi_changed; 4773 } __packed; 4774 4775 struct wmi_10_4_peer_extd_stats { 4776 struct wmi_mac_addr peer_macaddr; 4777 __le32 inactive_time; 4778 __le32 peer_chain_rssi; 4779 __le32 rx_duration; 4780 __le32 reserved[10]; 4781 } __packed; 4782 4783 struct wmi_10_4_bss_bcn_stats { 4784 __le32 vdev_id; 4785 __le32 bss_bcns_dropped; 4786 __le32 bss_bcn_delivered; 4787 } __packed; 4788 4789 struct wmi_10_4_bss_bcn_filter_stats { 4790 __le32 bcns_dropped; 4791 __le32 bcns_delivered; 4792 __le32 active_filters; 4793 struct wmi_10_4_bss_bcn_stats bss_stats; 4794 } __packed; 4795 4796 struct wmi_10_2_pdev_ext_stats { 4797 __le32 rx_rssi_comb; 4798 __le32 rx_rssi[4]; 4799 __le32 rx_mcs[10]; 4800 __le32 tx_mcs[10]; 4801 __le32 ack_rssi; 4802 } __packed; 4803 4804 struct wmi_vdev_create_cmd { 4805 __le32 vdev_id; 4806 __le32 vdev_type; 4807 __le32 vdev_subtype; 4808 struct wmi_mac_addr vdev_macaddr; 4809 } __packed; 4810 4811 enum wmi_vdev_type { 4812 WMI_VDEV_TYPE_AP = 1, 4813 WMI_VDEV_TYPE_STA = 2, 4814 WMI_VDEV_TYPE_IBSS = 3, 4815 WMI_VDEV_TYPE_MONITOR = 4, 4816 }; 4817 4818 enum wmi_vdev_subtype { 4819 WMI_VDEV_SUBTYPE_NONE, 4820 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4821 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4822 WMI_VDEV_SUBTYPE_P2P_GO, 4823 WMI_VDEV_SUBTYPE_PROXY_STA, 4824 WMI_VDEV_SUBTYPE_MESH_11S, 4825 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4826 }; 4827 4828 enum wmi_vdev_subtype_legacy { 4829 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4830 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4831 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4832 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4833 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4834 }; 4835 4836 enum wmi_vdev_subtype_10_2_4 { 4837 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4838 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4839 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4840 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4841 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4842 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4843 }; 4844 4845 enum wmi_vdev_subtype_10_4 { 4846 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4847 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4848 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4849 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4850 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4851 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4852 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4853 }; 4854 4855 /* values for vdev_subtype */ 4856 4857 /* values for vdev_start_request flags */ 4858 /* 4859 * Indicates that AP VDEV uses hidden ssid. only valid for 4860 * AP/GO 4861 */ 4862 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4863 /* 4864 * Indicates if robust management frame/management frame 4865 * protection is enabled. For GO/AP vdevs, it indicates that 4866 * it may support station/client associations with RMF enabled. 4867 * For STA/client vdevs, it indicates that sta will 4868 * associate with AP with RMF enabled. 4869 */ 4870 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4871 4872 struct wmi_p2p_noa_descriptor { 4873 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4874 __le32 duration; /* Absent period duration in micro seconds */ 4875 __le32 interval; /* Absent period interval in micro seconds */ 4876 __le32 start_time; /* 32 bit tsf time when in starts */ 4877 } __packed; 4878 4879 struct wmi_vdev_start_request_cmd { 4880 /* WMI channel */ 4881 struct wmi_channel chan; 4882 /* unique id identifying the VDEV, generated by the caller */ 4883 __le32 vdev_id; 4884 /* requestor id identifying the caller module */ 4885 __le32 requestor_id; 4886 /* beacon interval from received beacon */ 4887 __le32 beacon_interval; 4888 /* DTIM Period from the received beacon */ 4889 __le32 dtim_period; 4890 /* Flags */ 4891 __le32 flags; 4892 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4893 struct wmi_ssid ssid; 4894 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4895 __le32 bcn_tx_rate; 4896 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4897 __le32 bcn_tx_power; 4898 /* number of p2p NOA descriptor(s) from scan entry */ 4899 __le32 num_noa_descriptors; 4900 /* 4901 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4902 * During CAC, Our HW shouldn't ack ditected frames 4903 */ 4904 __le32 disable_hw_ack; 4905 /* actual p2p NOA descriptor from scan entry */ 4906 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4907 } __packed; 4908 4909 struct wmi_vdev_restart_request_cmd { 4910 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4911 } __packed; 4912 4913 struct wmi_vdev_start_request_arg { 4914 u32 vdev_id; 4915 struct wmi_channel_arg channel; 4916 u32 bcn_intval; 4917 u32 dtim_period; 4918 u8 *ssid; 4919 u32 ssid_len; 4920 u32 bcn_tx_rate; 4921 u32 bcn_tx_power; 4922 bool disable_hw_ack; 4923 bool hidden_ssid; 4924 bool pmf_enabled; 4925 }; 4926 4927 struct wmi_vdev_delete_cmd { 4928 /* unique id identifying the VDEV, generated by the caller */ 4929 __le32 vdev_id; 4930 } __packed; 4931 4932 struct wmi_vdev_up_cmd { 4933 __le32 vdev_id; 4934 __le32 vdev_assoc_id; 4935 struct wmi_mac_addr vdev_bssid; 4936 } __packed; 4937 4938 struct wmi_vdev_stop_cmd { 4939 __le32 vdev_id; 4940 } __packed; 4941 4942 struct wmi_vdev_down_cmd { 4943 __le32 vdev_id; 4944 } __packed; 4945 4946 struct wmi_vdev_standby_response_cmd { 4947 /* unique id identifying the VDEV, generated by the caller */ 4948 __le32 vdev_id; 4949 } __packed; 4950 4951 struct wmi_vdev_resume_response_cmd { 4952 /* unique id identifying the VDEV, generated by the caller */ 4953 __le32 vdev_id; 4954 } __packed; 4955 4956 struct wmi_vdev_set_param_cmd { 4957 __le32 vdev_id; 4958 __le32 param_id; 4959 __le32 param_value; 4960 } __packed; 4961 4962 #define WMI_MAX_KEY_INDEX 3 4963 #define WMI_MAX_KEY_LEN 32 4964 4965 #define WMI_KEY_PAIRWISE 0x00 4966 #define WMI_KEY_GROUP 0x01 4967 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4968 4969 struct wmi_key_seq_counter { 4970 __le32 key_seq_counter_l; 4971 __le32 key_seq_counter_h; 4972 } __packed; 4973 4974 enum wmi_cipher_suites { 4975 WMI_CIPHER_NONE, 4976 WMI_CIPHER_WEP, 4977 WMI_CIPHER_TKIP, 4978 WMI_CIPHER_AES_OCB, 4979 WMI_CIPHER_AES_CCM, 4980 WMI_CIPHER_WAPI, 4981 WMI_CIPHER_CKIP, 4982 WMI_CIPHER_AES_CMAC, 4983 WMI_CIPHER_AES_GCM, 4984 }; 4985 4986 enum wmi_tlv_cipher_suites { 4987 WMI_TLV_CIPHER_NONE, 4988 WMI_TLV_CIPHER_WEP, 4989 WMI_TLV_CIPHER_TKIP, 4990 WMI_TLV_CIPHER_AES_OCB, 4991 WMI_TLV_CIPHER_AES_CCM, 4992 WMI_TLV_CIPHER_WAPI, 4993 WMI_TLV_CIPHER_CKIP, 4994 WMI_TLV_CIPHER_AES_CMAC, 4995 WMI_TLV_CIPHER_ANY, 4996 WMI_TLV_CIPHER_AES_GCM, 4997 }; 4998 4999 struct wmi_vdev_install_key_cmd { 5000 __le32 vdev_id; 5001 struct wmi_mac_addr peer_macaddr; 5002 __le32 key_idx; 5003 __le32 key_flags; 5004 __le32 key_cipher; /* %WMI_CIPHER_ */ 5005 struct wmi_key_seq_counter key_rsc_counter; 5006 struct wmi_key_seq_counter key_global_rsc_counter; 5007 struct wmi_key_seq_counter key_tsc_counter; 5008 u8 wpi_key_rsc_counter[16]; 5009 u8 wpi_key_tsc_counter[16]; 5010 __le32 key_len; 5011 __le32 key_txmic_len; 5012 __le32 key_rxmic_len; 5013 5014 /* contains key followed by tx mic followed by rx mic */ 5015 u8 key_data[0]; 5016 } __packed; 5017 5018 struct wmi_vdev_install_key_arg { 5019 u32 vdev_id; 5020 const u8 *macaddr; 5021 u32 key_idx; 5022 u32 key_flags; 5023 u32 key_cipher; 5024 u32 key_len; 5025 u32 key_txmic_len; 5026 u32 key_rxmic_len; 5027 const void *key_data; 5028 }; 5029 5030 /* 5031 * vdev fixed rate format: 5032 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 5033 * - nss - b5:b4 - ss number (0 mean 1ss) 5034 * - rate_mcs - b3:b0 - as below 5035 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 5036 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 5037 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 5038 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 5039 * HT/VHT: MCS index 5040 */ 5041 5042 /* Preamble types to be used with VDEV fixed rate configuration */ 5043 enum wmi_rate_preamble { 5044 WMI_RATE_PREAMBLE_OFDM, 5045 WMI_RATE_PREAMBLE_CCK, 5046 WMI_RATE_PREAMBLE_HT, 5047 WMI_RATE_PREAMBLE_VHT, 5048 }; 5049 5050 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 5051 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 5052 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 5053 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 5054 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 5055 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 5056 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 5057 (((preamble) << 6) | ((nss) << 4) | (rate)) 5058 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 5059 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 5060 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) 5061 5062 #define ATH10K_VHT_MCS_NUM 10 5063 #define ATH10K_BW_NUM 6 5064 #define ATH10K_NSS_NUM 4 5065 #define ATH10K_LEGACY_NUM 12 5066 #define ATH10K_GI_NUM 2 5067 #define ATH10K_HT_MCS_NUM 32 5068 #define ATH10K_RATE_TABLE_NUM 320 5069 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 5070 5071 /* Value to disable fixed rate setting */ 5072 #define WMI_FIXED_RATE_NONE (0xff) 5073 5074 struct wmi_vdev_param_map { 5075 u32 rts_threshold; 5076 u32 fragmentation_threshold; 5077 u32 beacon_interval; 5078 u32 listen_interval; 5079 u32 multicast_rate; 5080 u32 mgmt_tx_rate; 5081 u32 slot_time; 5082 u32 preamble; 5083 u32 swba_time; 5084 u32 wmi_vdev_stats_update_period; 5085 u32 wmi_vdev_pwrsave_ageout_time; 5086 u32 wmi_vdev_host_swba_interval; 5087 u32 dtim_period; 5088 u32 wmi_vdev_oc_scheduler_air_time_limit; 5089 u32 wds; 5090 u32 atim_window; 5091 u32 bmiss_count_max; 5092 u32 bmiss_first_bcnt; 5093 u32 bmiss_final_bcnt; 5094 u32 feature_wmm; 5095 u32 chwidth; 5096 u32 chextoffset; 5097 u32 disable_htprotection; 5098 u32 sta_quickkickout; 5099 u32 mgmt_rate; 5100 u32 protection_mode; 5101 u32 fixed_rate; 5102 u32 sgi; 5103 u32 ldpc; 5104 u32 tx_stbc; 5105 u32 rx_stbc; 5106 u32 intra_bss_fwd; 5107 u32 def_keyid; 5108 u32 nss; 5109 u32 bcast_data_rate; 5110 u32 mcast_data_rate; 5111 u32 mcast_indicate; 5112 u32 dhcp_indicate; 5113 u32 unknown_dest_indicate; 5114 u32 ap_keepalive_min_idle_inactive_time_secs; 5115 u32 ap_keepalive_max_idle_inactive_time_secs; 5116 u32 ap_keepalive_max_unresponsive_time_secs; 5117 u32 ap_enable_nawds; 5118 u32 mcast2ucast_set; 5119 u32 enable_rtscts; 5120 u32 txbf; 5121 u32 packet_powersave; 5122 u32 drop_unencry; 5123 u32 tx_encap_type; 5124 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5125 u32 rc_num_retries; 5126 u32 cabq_maxdur; 5127 u32 mfptest_set; 5128 u32 rts_fixed_rate; 5129 u32 vht_sgimask; 5130 u32 vht80_ratemask; 5131 u32 early_rx_adjust_enable; 5132 u32 early_rx_tgt_bmiss_num; 5133 u32 early_rx_bmiss_sample_cycle; 5134 u32 early_rx_slop_step; 5135 u32 early_rx_init_slop; 5136 u32 early_rx_adjust_pause; 5137 u32 proxy_sta; 5138 u32 meru_vc; 5139 u32 rx_decap_type; 5140 u32 bw_nss_ratemask; 5141 u32 inc_tsf; 5142 u32 dec_tsf; 5143 u32 disable_4addr_src_lrn; 5144 u32 rtt_responder_role; 5145 }; 5146 5147 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5148 5149 /* the definition of different VDEV parameters */ 5150 enum wmi_vdev_param { 5151 /* RTS Threshold */ 5152 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5153 /* Fragmentation threshold */ 5154 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5155 /* beacon interval in TUs */ 5156 WMI_VDEV_PARAM_BEACON_INTERVAL, 5157 /* Listen interval in TUs */ 5158 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5159 /* multicast rate in Mbps */ 5160 WMI_VDEV_PARAM_MULTICAST_RATE, 5161 /* management frame rate in Mbps */ 5162 WMI_VDEV_PARAM_MGMT_TX_RATE, 5163 /* slot time (long vs short) */ 5164 WMI_VDEV_PARAM_SLOT_TIME, 5165 /* preamble (long vs short) */ 5166 WMI_VDEV_PARAM_PREAMBLE, 5167 /* SWBA time (time before tbtt in msec) */ 5168 WMI_VDEV_PARAM_SWBA_TIME, 5169 /* time period for updating VDEV stats */ 5170 WMI_VDEV_STATS_UPDATE_PERIOD, 5171 /* age out time in msec for frames queued for station in power save */ 5172 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5173 /* 5174 * Host SWBA interval (time in msec before tbtt for SWBA event 5175 * generation). 5176 */ 5177 WMI_VDEV_HOST_SWBA_INTERVAL, 5178 /* DTIM period (specified in units of num beacon intervals) */ 5179 WMI_VDEV_PARAM_DTIM_PERIOD, 5180 /* 5181 * scheduler air time limit for this VDEV. used by off chan 5182 * scheduler. 5183 */ 5184 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5185 /* enable/dsiable WDS for this VDEV */ 5186 WMI_VDEV_PARAM_WDS, 5187 /* ATIM Window */ 5188 WMI_VDEV_PARAM_ATIM_WINDOW, 5189 /* BMISS max */ 5190 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5191 /* BMISS first time */ 5192 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5193 /* BMISS final time */ 5194 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5195 /* WMM enables/disabled */ 5196 WMI_VDEV_PARAM_FEATURE_WMM, 5197 /* Channel width */ 5198 WMI_VDEV_PARAM_CHWIDTH, 5199 /* Channel Offset */ 5200 WMI_VDEV_PARAM_CHEXTOFFSET, 5201 /* Disable HT Protection */ 5202 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5203 /* Quick STA Kickout */ 5204 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5205 /* Rate to be used with Management frames */ 5206 WMI_VDEV_PARAM_MGMT_RATE, 5207 /* Protection Mode */ 5208 WMI_VDEV_PARAM_PROTECTION_MODE, 5209 /* Fixed rate setting */ 5210 WMI_VDEV_PARAM_FIXED_RATE, 5211 /* Short GI Enable/Disable */ 5212 WMI_VDEV_PARAM_SGI, 5213 /* Enable LDPC */ 5214 WMI_VDEV_PARAM_LDPC, 5215 /* Enable Tx STBC */ 5216 WMI_VDEV_PARAM_TX_STBC, 5217 /* Enable Rx STBC */ 5218 WMI_VDEV_PARAM_RX_STBC, 5219 /* Intra BSS forwarding */ 5220 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5221 /* Setting Default xmit key for Vdev */ 5222 WMI_VDEV_PARAM_DEF_KEYID, 5223 /* NSS width */ 5224 WMI_VDEV_PARAM_NSS, 5225 /* Set the custom rate for the broadcast data frames */ 5226 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5227 /* Set the custom rate (rate-code) for multicast data frames */ 5228 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5229 /* Tx multicast packet indicate Enable/Disable */ 5230 WMI_VDEV_PARAM_MCAST_INDICATE, 5231 /* Tx DHCP packet indicate Enable/Disable */ 5232 WMI_VDEV_PARAM_DHCP_INDICATE, 5233 /* Enable host inspection of Tx unicast packet to unknown destination */ 5234 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5235 5236 /* The minimum amount of time AP begins to consider STA inactive */ 5237 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5238 5239 /* 5240 * An associated STA is considered inactive when there is no recent 5241 * TX/RX activity and no downlink frames are buffered for it. Once a 5242 * STA exceeds the maximum idle inactive time, the AP will send an 5243 * 802.11 data-null as a keep alive to verify the STA is still 5244 * associated. If the STA does ACK the data-null, or if the data-null 5245 * is buffered and the STA does not retrieve it, the STA will be 5246 * considered unresponsive 5247 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5248 */ 5249 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5250 5251 /* 5252 * An associated STA is considered unresponsive if there is no recent 5253 * TX/RX activity and downlink frames are buffered for it. Once a STA 5254 * exceeds the maximum unresponsive time, the AP will send a 5255 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5256 */ 5257 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5258 5259 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5260 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5261 /* Enable/Disable RTS-CTS */ 5262 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5263 /* Enable TXBFee/er */ 5264 WMI_VDEV_PARAM_TXBF, 5265 5266 /* Set packet power save */ 5267 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5268 5269 /* 5270 * Drops un-encrypted packets if eceived in an encrypted connection 5271 * otherwise forwards to host. 5272 */ 5273 WMI_VDEV_PARAM_DROP_UNENCRY, 5274 5275 /* 5276 * Set the encapsulation type for frames. 5277 */ 5278 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5279 }; 5280 5281 /* the definition of different VDEV parameters */ 5282 enum wmi_10x_vdev_param { 5283 /* RTS Threshold */ 5284 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5285 /* Fragmentation threshold */ 5286 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5287 /* beacon interval in TUs */ 5288 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5289 /* Listen interval in TUs */ 5290 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5291 /* multicast rate in Mbps */ 5292 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5293 /* management frame rate in Mbps */ 5294 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5295 /* slot time (long vs short) */ 5296 WMI_10X_VDEV_PARAM_SLOT_TIME, 5297 /* preamble (long vs short) */ 5298 WMI_10X_VDEV_PARAM_PREAMBLE, 5299 /* SWBA time (time before tbtt in msec) */ 5300 WMI_10X_VDEV_PARAM_SWBA_TIME, 5301 /* time period for updating VDEV stats */ 5302 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5303 /* age out time in msec for frames queued for station in power save */ 5304 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5305 /* 5306 * Host SWBA interval (time in msec before tbtt for SWBA event 5307 * generation). 5308 */ 5309 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5310 /* DTIM period (specified in units of num beacon intervals) */ 5311 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5312 /* 5313 * scheduler air time limit for this VDEV. used by off chan 5314 * scheduler. 5315 */ 5316 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5317 /* enable/dsiable WDS for this VDEV */ 5318 WMI_10X_VDEV_PARAM_WDS, 5319 /* ATIM Window */ 5320 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5321 /* BMISS max */ 5322 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5323 /* WMM enables/disabled */ 5324 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5325 /* Channel width */ 5326 WMI_10X_VDEV_PARAM_CHWIDTH, 5327 /* Channel Offset */ 5328 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5329 /* Disable HT Protection */ 5330 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5331 /* Quick STA Kickout */ 5332 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5333 /* Rate to be used with Management frames */ 5334 WMI_10X_VDEV_PARAM_MGMT_RATE, 5335 /* Protection Mode */ 5336 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5337 /* Fixed rate setting */ 5338 WMI_10X_VDEV_PARAM_FIXED_RATE, 5339 /* Short GI Enable/Disable */ 5340 WMI_10X_VDEV_PARAM_SGI, 5341 /* Enable LDPC */ 5342 WMI_10X_VDEV_PARAM_LDPC, 5343 /* Enable Tx STBC */ 5344 WMI_10X_VDEV_PARAM_TX_STBC, 5345 /* Enable Rx STBC */ 5346 WMI_10X_VDEV_PARAM_RX_STBC, 5347 /* Intra BSS forwarding */ 5348 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5349 /* Setting Default xmit key for Vdev */ 5350 WMI_10X_VDEV_PARAM_DEF_KEYID, 5351 /* NSS width */ 5352 WMI_10X_VDEV_PARAM_NSS, 5353 /* Set the custom rate for the broadcast data frames */ 5354 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5355 /* Set the custom rate (rate-code) for multicast data frames */ 5356 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5357 /* Tx multicast packet indicate Enable/Disable */ 5358 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5359 /* Tx DHCP packet indicate Enable/Disable */ 5360 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5361 /* Enable host inspection of Tx unicast packet to unknown destination */ 5362 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5363 5364 /* The minimum amount of time AP begins to consider STA inactive */ 5365 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5366 5367 /* 5368 * An associated STA is considered inactive when there is no recent 5369 * TX/RX activity and no downlink frames are buffered for it. Once a 5370 * STA exceeds the maximum idle inactive time, the AP will send an 5371 * 802.11 data-null as a keep alive to verify the STA is still 5372 * associated. If the STA does ACK the data-null, or if the data-null 5373 * is buffered and the STA does not retrieve it, the STA will be 5374 * considered unresponsive 5375 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5376 */ 5377 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5378 5379 /* 5380 * An associated STA is considered unresponsive if there is no recent 5381 * TX/RX activity and downlink frames are buffered for it. Once a STA 5382 * exceeds the maximum unresponsive time, the AP will send a 5383 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5384 */ 5385 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5386 5387 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5388 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5389 5390 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5391 /* Enable/Disable RTS-CTS */ 5392 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5393 5394 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5395 5396 /* following are available as of firmware 10.2 */ 5397 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5398 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5399 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5400 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5401 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5402 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5403 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5404 }; 5405 5406 enum wmi_10_4_vdev_param { 5407 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5408 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5409 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5410 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5411 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5412 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5413 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5414 WMI_10_4_VDEV_PARAM_PREAMBLE, 5415 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5416 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5417 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5418 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5419 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5420 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5421 WMI_10_4_VDEV_PARAM_WDS, 5422 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5423 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5424 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5425 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5426 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5427 WMI_10_4_VDEV_PARAM_CHWIDTH, 5428 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5429 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5430 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5431 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5432 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5433 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5434 WMI_10_4_VDEV_PARAM_SGI, 5435 WMI_10_4_VDEV_PARAM_LDPC, 5436 WMI_10_4_VDEV_PARAM_TX_STBC, 5437 WMI_10_4_VDEV_PARAM_RX_STBC, 5438 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5439 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5440 WMI_10_4_VDEV_PARAM_NSS, 5441 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5442 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5443 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5444 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5445 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5446 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5447 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5448 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5449 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5450 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5451 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5452 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5453 WMI_10_4_VDEV_PARAM_TXBF, 5454 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5455 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5456 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5457 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5458 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5459 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5460 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5461 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5462 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5463 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5464 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5465 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5466 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5467 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5468 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5469 WMI_10_4_VDEV_PARAM_PROXY_STA, 5470 WMI_10_4_VDEV_PARAM_MERU_VC, 5471 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5472 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5473 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5474 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5475 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5476 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5477 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5478 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5479 WMI_10_4_VDEV_PARAM_RX_FILTER, 5480 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5481 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5482 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5483 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5484 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, 5485 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, 5486 WMI_10_4_VDEV_PARAM_NSS_VHT160, 5487 WMI_10_4_VDEV_PARAM_NSS_VHT80_80, 5488 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, 5489 WMI_10_4_VDEV_PARAM_DISABLE_CABQ, 5490 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, 5491 WMI_10_4_VDEV_PARAM_TX_POWER, 5492 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, 5493 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, 5494 }; 5495 5496 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 5497 5498 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5499 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5500 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5501 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5502 5503 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5504 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5505 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5506 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5507 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5508 5509 /* slot time long */ 5510 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5511 /* slot time short */ 5512 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5513 /* preablbe long */ 5514 #define WMI_VDEV_PREAMBLE_LONG 0x1 5515 /* preablbe short */ 5516 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5517 5518 enum wmi_start_event_param { 5519 WMI_VDEV_RESP_START_EVENT = 0, 5520 WMI_VDEV_RESP_RESTART_EVENT, 5521 }; 5522 5523 struct wmi_vdev_start_response_event { 5524 __le32 vdev_id; 5525 __le32 req_id; 5526 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5527 __le32 status; 5528 } __packed; 5529 5530 struct wmi_vdev_standby_req_event { 5531 /* unique id identifying the VDEV, generated by the caller */ 5532 __le32 vdev_id; 5533 } __packed; 5534 5535 struct wmi_vdev_resume_req_event { 5536 /* unique id identifying the VDEV, generated by the caller */ 5537 __le32 vdev_id; 5538 } __packed; 5539 5540 struct wmi_vdev_stopped_event { 5541 /* unique id identifying the VDEV, generated by the caller */ 5542 __le32 vdev_id; 5543 } __packed; 5544 5545 /* 5546 * common structure used for simple events 5547 * (stopped, resume_req, standby response) 5548 */ 5549 struct wmi_vdev_simple_event { 5550 /* unique id identifying the VDEV, generated by the caller */ 5551 __le32 vdev_id; 5552 } __packed; 5553 5554 /* VDEV start response status codes */ 5555 /* VDEV successfully started */ 5556 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5557 5558 /* requested VDEV not found */ 5559 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5560 5561 /* unsupported VDEV combination */ 5562 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5563 5564 /* TODO: please add more comments if you have in-depth information */ 5565 struct wmi_vdev_spectral_conf_cmd { 5566 __le32 vdev_id; 5567 5568 /* number of fft samples to send (0 for infinite) */ 5569 __le32 scan_count; 5570 __le32 scan_period; 5571 __le32 scan_priority; 5572 5573 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5574 __le32 scan_fft_size; 5575 __le32 scan_gc_ena; 5576 __le32 scan_restart_ena; 5577 __le32 scan_noise_floor_ref; 5578 __le32 scan_init_delay; 5579 __le32 scan_nb_tone_thr; 5580 __le32 scan_str_bin_thr; 5581 __le32 scan_wb_rpt_mode; 5582 __le32 scan_rssi_rpt_mode; 5583 __le32 scan_rssi_thr; 5584 __le32 scan_pwr_format; 5585 5586 /* rpt_mode: Format of FFT report to software for spectral scan 5587 * triggered FFTs: 5588 * 0: No FFT report (only spectral scan summary report) 5589 * 1: 2-dword summary of metrics for each completed FFT + spectral 5590 * scan summary report 5591 * 2: 2-dword summary of metrics for each completed FFT + 5592 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5593 * report 5594 * 3: 2-dword summary of metrics for each completed FFT + 5595 * 2x- oversampled bins (all) per FFT + spectral scan summary 5596 */ 5597 __le32 scan_rpt_mode; 5598 __le32 scan_bin_scale; 5599 __le32 scan_dbm_adj; 5600 __le32 scan_chn_mask; 5601 } __packed; 5602 5603 struct wmi_vdev_spectral_conf_arg { 5604 u32 vdev_id; 5605 u32 scan_count; 5606 u32 scan_period; 5607 u32 scan_priority; 5608 u32 scan_fft_size; 5609 u32 scan_gc_ena; 5610 u32 scan_restart_ena; 5611 u32 scan_noise_floor_ref; 5612 u32 scan_init_delay; 5613 u32 scan_nb_tone_thr; 5614 u32 scan_str_bin_thr; 5615 u32 scan_wb_rpt_mode; 5616 u32 scan_rssi_rpt_mode; 5617 u32 scan_rssi_thr; 5618 u32 scan_pwr_format; 5619 u32 scan_rpt_mode; 5620 u32 scan_bin_scale; 5621 u32 scan_dbm_adj; 5622 u32 scan_chn_mask; 5623 }; 5624 5625 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5626 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5627 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5628 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5629 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5630 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5631 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5632 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5633 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5634 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5635 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5636 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5637 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5638 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5639 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5640 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5641 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5642 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5643 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5644 5645 struct wmi_vdev_spectral_enable_cmd { 5646 __le32 vdev_id; 5647 __le32 trigger_cmd; 5648 __le32 enable_cmd; 5649 } __packed; 5650 5651 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5652 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5653 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5654 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5655 5656 /* Beacon processing related command and event structures */ 5657 struct wmi_bcn_tx_hdr { 5658 __le32 vdev_id; 5659 __le32 tx_rate; 5660 __le32 tx_power; 5661 __le32 bcn_len; 5662 } __packed; 5663 5664 struct wmi_bcn_tx_cmd { 5665 struct wmi_bcn_tx_hdr hdr; 5666 u8 *bcn[0]; 5667 } __packed; 5668 5669 struct wmi_bcn_tx_arg { 5670 u32 vdev_id; 5671 u32 tx_rate; 5672 u32 tx_power; 5673 u32 bcn_len; 5674 const void *bcn; 5675 }; 5676 5677 enum wmi_bcn_tx_ref_flags { 5678 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5679 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5680 }; 5681 5682 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5683 * chainmask yields no beacons on the air at all. 5684 */ 5685 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5686 5687 struct wmi_bcn_tx_ref_cmd { 5688 __le32 vdev_id; 5689 __le32 data_len; 5690 /* physical address of the frame - dma pointer */ 5691 __le32 data_ptr; 5692 /* id for host to track */ 5693 __le32 msdu_id; 5694 /* frame ctrl to setup PPDU desc */ 5695 __le32 frame_control; 5696 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5697 __le32 flags; 5698 /* introduced in 10.2 */ 5699 __le32 antenna_mask; 5700 } __packed; 5701 5702 /* Beacon filter */ 5703 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5704 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5705 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5706 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5707 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5708 5709 struct wmi_bcn_filter_rx_cmd { 5710 /* Filter ID */ 5711 __le32 bcn_filter_id; 5712 /* Filter type - wmi_bcn_filter */ 5713 __le32 bcn_filter; 5714 /* Buffer len */ 5715 __le32 bcn_filter_len; 5716 /* Filter info (threshold, BSSID, RSSI) */ 5717 u8 *bcn_filter_buf; 5718 } __packed; 5719 5720 /* Capabilities and IEs to be passed to firmware */ 5721 struct wmi_bcn_prb_info { 5722 /* Capabilities */ 5723 __le32 caps; 5724 /* ERP info */ 5725 __le32 erp; 5726 /* Advanced capabilities */ 5727 /* HT capabilities */ 5728 /* HT Info */ 5729 /* ibss_dfs */ 5730 /* wpa Info */ 5731 /* rsn Info */ 5732 /* rrm info */ 5733 /* ath_ext */ 5734 /* app IE */ 5735 } __packed; 5736 5737 struct wmi_bcn_tmpl_cmd { 5738 /* unique id identifying the VDEV, generated by the caller */ 5739 __le32 vdev_id; 5740 /* TIM IE offset from the beginning of the template. */ 5741 __le32 tim_ie_offset; 5742 /* beacon probe capabilities and IEs */ 5743 struct wmi_bcn_prb_info bcn_prb_info; 5744 /* beacon buffer length */ 5745 __le32 buf_len; 5746 /* variable length data */ 5747 u8 data[1]; 5748 } __packed; 5749 5750 struct wmi_prb_tmpl_cmd { 5751 /* unique id identifying the VDEV, generated by the caller */ 5752 __le32 vdev_id; 5753 /* beacon probe capabilities and IEs */ 5754 struct wmi_bcn_prb_info bcn_prb_info; 5755 /* beacon buffer length */ 5756 __le32 buf_len; 5757 /* Variable length data */ 5758 u8 data[1]; 5759 } __packed; 5760 5761 enum wmi_sta_ps_mode { 5762 /* enable power save for the given STA VDEV */ 5763 WMI_STA_PS_MODE_DISABLED = 0, 5764 /* disable power save for a given STA VDEV */ 5765 WMI_STA_PS_MODE_ENABLED = 1, 5766 }; 5767 5768 struct wmi_sta_powersave_mode_cmd { 5769 /* unique id identifying the VDEV, generated by the caller */ 5770 __le32 vdev_id; 5771 5772 /* 5773 * Power save mode 5774 * (see enum wmi_sta_ps_mode) 5775 */ 5776 __le32 sta_ps_mode; 5777 } __packed; 5778 5779 enum wmi_csa_offload_en { 5780 WMI_CSA_OFFLOAD_DISABLE = 0, 5781 WMI_CSA_OFFLOAD_ENABLE = 1, 5782 }; 5783 5784 struct wmi_csa_offload_enable_cmd { 5785 __le32 vdev_id; 5786 __le32 csa_offload_enable; 5787 } __packed; 5788 5789 struct wmi_csa_offload_chanswitch_cmd { 5790 __le32 vdev_id; 5791 struct wmi_channel chan; 5792 } __packed; 5793 5794 /* 5795 * This parameter controls the policy for retrieving frames from AP while the 5796 * STA is in sleep state. 5797 * 5798 * Only takes affect if the sta_ps_mode is enabled 5799 */ 5800 enum wmi_sta_ps_param_rx_wake_policy { 5801 /* 5802 * Wake up when ever there is an RX activity on the VDEV. In this mode 5803 * the Power save SM(state machine) will come out of sleep by either 5804 * sending null frame (or) a data frame (with PS==0) in response to TIM 5805 * bit set in the received beacon frame from AP. 5806 */ 5807 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5808 5809 /* 5810 * Here the power save state machine will not wakeup in response to TIM 5811 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5812 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5813 * access categories are delivery-enabled, the station will send a 5814 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5815 */ 5816 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5817 }; 5818 5819 /* 5820 * Number of tx frames/beacon that cause the power save SM to wake up. 5821 * 5822 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5823 * meaning, It will cause the SM to never wake up. This is useful if you want 5824 * to keep the system to sleep all the time for some kind of test mode . host 5825 * can change this parameter any time. It will affect at the next tx frame. 5826 */ 5827 enum wmi_sta_ps_param_tx_wake_threshold { 5828 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5829 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5830 5831 /* 5832 * Values greater than one indicate that many TX attempts per beacon 5833 * interval before the STA will wake up 5834 */ 5835 }; 5836 5837 /* 5838 * The maximum number of PS-Poll frames the FW will send in response to 5839 * traffic advertised in TIM before waking up (by sending a null frame with PS 5840 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5841 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5842 * parameter is used when the RX wake policy is 5843 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5844 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5845 */ 5846 enum wmi_sta_ps_param_pspoll_count { 5847 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5848 /* 5849 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5850 * FW will send before waking up. 5851 */ 5852 5853 /* When u-APSD is enabled the firmware will be very reluctant to exit 5854 * STA PS. This could result in very poor Rx performance with STA doing 5855 * PS-Poll for each and every buffered frame. This value is a bit 5856 * arbitrary. 5857 */ 5858 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5859 }; 5860 5861 /* 5862 * This will include the delivery and trigger enabled state for every AC. 5863 * This is the negotiated state with AP. The host MLME needs to set this based 5864 * on AP capability and the state Set in the association request by the 5865 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5866 */ 5867 #define WMI_UAPSD_AC_TYPE_DELI 0 5868 #define WMI_UAPSD_AC_TYPE_TRIG 1 5869 5870 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5871 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5872 5873 enum wmi_sta_ps_param_uapsd { 5874 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5875 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5876 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5877 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5878 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5879 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5880 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5881 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5882 }; 5883 5884 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5885 5886 struct wmi_sta_uapsd_auto_trig_param { 5887 __le32 wmm_ac; 5888 __le32 user_priority; 5889 __le32 service_interval; 5890 __le32 suspend_interval; 5891 __le32 delay_interval; 5892 }; 5893 5894 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5895 __le32 vdev_id; 5896 struct wmi_mac_addr peer_macaddr; 5897 __le32 num_ac; 5898 }; 5899 5900 struct wmi_sta_uapsd_auto_trig_arg { 5901 u32 wmm_ac; 5902 u32 user_priority; 5903 u32 service_interval; 5904 u32 suspend_interval; 5905 u32 delay_interval; 5906 }; 5907 5908 enum wmi_sta_powersave_param { 5909 /* 5910 * Controls how frames are retrievd from AP while STA is sleeping 5911 * 5912 * (see enum wmi_sta_ps_param_rx_wake_policy) 5913 */ 5914 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5915 5916 /* 5917 * The STA will go active after this many TX 5918 * 5919 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5920 */ 5921 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5922 5923 /* 5924 * Number of PS-Poll to send before STA wakes up 5925 * 5926 * (see enum wmi_sta_ps_param_pspoll_count) 5927 * 5928 */ 5929 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5930 5931 /* 5932 * TX/RX inactivity time in msec before going to sleep. 5933 * 5934 * The power save SM will monitor tx/rx activity on the VDEV, if no 5935 * activity for the specified msec of the parameter the Power save 5936 * SM will go to sleep. 5937 */ 5938 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5939 5940 /* 5941 * Set uapsd configuration. 5942 * 5943 * (see enum wmi_sta_ps_param_uapsd) 5944 */ 5945 WMI_STA_PS_PARAM_UAPSD = 4, 5946 }; 5947 5948 struct wmi_sta_powersave_param_cmd { 5949 __le32 vdev_id; 5950 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5951 __le32 param_value; 5952 } __packed; 5953 5954 /* No MIMO power save */ 5955 #define WMI_STA_MIMO_PS_MODE_DISABLE 5956 /* mimo powersave mode static*/ 5957 #define WMI_STA_MIMO_PS_MODE_STATIC 5958 /* mimo powersave mode dynamic */ 5959 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5960 5961 struct wmi_sta_mimo_ps_mode_cmd { 5962 /* unique id identifying the VDEV, generated by the caller */ 5963 __le32 vdev_id; 5964 /* mimo powersave mode as defined above */ 5965 __le32 mimo_pwrsave_mode; 5966 } __packed; 5967 5968 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5969 enum wmi_ap_ps_param_uapsd { 5970 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5971 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5972 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5973 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5974 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5975 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5976 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5977 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5978 }; 5979 5980 /* U-APSD maximum service period of peer station */ 5981 enum wmi_ap_ps_peer_param_max_sp { 5982 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5983 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5984 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5985 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5986 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5987 }; 5988 5989 /* 5990 * AP power save parameter 5991 * Set a power save specific parameter for a peer station 5992 */ 5993 enum wmi_ap_ps_peer_param { 5994 /* Set uapsd configuration for a given peer. 5995 * 5996 * Include the delivery and trigger enabled state for every AC. 5997 * The host MLME needs to set this based on AP capability and stations 5998 * request Set in the association request received from the station. 5999 * 6000 * Lower 8 bits of the value specify the UAPSD configuration. 6001 * 6002 * (see enum wmi_ap_ps_param_uapsd) 6003 * The default value is 0. 6004 */ 6005 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 6006 6007 /* 6008 * Set the service period for a UAPSD capable station 6009 * 6010 * The service period from wme ie in the (re)assoc request frame. 6011 * 6012 * (see enum wmi_ap_ps_peer_param_max_sp) 6013 */ 6014 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 6015 6016 /* Time in seconds for aging out buffered frames for STA in PS */ 6017 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6018 }; 6019 6020 struct wmi_ap_ps_peer_cmd { 6021 /* unique id identifying the VDEV, generated by the caller */ 6022 __le32 vdev_id; 6023 6024 /* peer MAC address */ 6025 struct wmi_mac_addr peer_macaddr; 6026 6027 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 6028 __le32 param_id; 6029 6030 /* AP powersave param value */ 6031 __le32 param_value; 6032 } __packed; 6033 6034 /* 128 clients = 4 words */ 6035 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 6036 6037 struct wmi_tim_info { 6038 __le32 tim_len; 6039 __le32 tim_mcast; 6040 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 6041 __le32 tim_changed; 6042 __le32 tim_num_ps_pending; 6043 } __packed; 6044 6045 struct wmi_tim_info_arg { 6046 __le32 tim_len; 6047 __le32 tim_mcast; 6048 const __le32 *tim_bitmap; 6049 __le32 tim_changed; 6050 __le32 tim_num_ps_pending; 6051 } __packed; 6052 6053 /* Maximum number of NOA Descriptors supported */ 6054 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 6055 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 6056 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 6057 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 6058 6059 struct wmi_p2p_noa_info { 6060 /* Bit 0 - Flag to indicate an update in NOA schedule 6061 * Bits 7-1 - Reserved 6062 */ 6063 u8 changed; 6064 /* NOA index */ 6065 u8 index; 6066 /* Bit 0 - Opp PS state of the AP 6067 * Bits 1-7 - Ctwindow in TUs 6068 */ 6069 u8 ctwindow_oppps; 6070 /* Number of NOA descriptors */ 6071 u8 num_descriptors; 6072 6073 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 6074 } __packed; 6075 6076 struct wmi_bcn_info { 6077 struct wmi_tim_info tim_info; 6078 struct wmi_p2p_noa_info p2p_noa_info; 6079 } __packed; 6080 6081 struct wmi_host_swba_event { 6082 __le32 vdev_map; 6083 struct wmi_bcn_info bcn_info[0]; 6084 } __packed; 6085 6086 struct wmi_10_2_4_bcn_info { 6087 struct wmi_tim_info tim_info; 6088 /* The 10.2.4 FW doesn't have p2p NOA info */ 6089 } __packed; 6090 6091 struct wmi_10_2_4_host_swba_event { 6092 __le32 vdev_map; 6093 struct wmi_10_2_4_bcn_info bcn_info[0]; 6094 } __packed; 6095 6096 /* 16 words = 512 client + 1 word = for guard */ 6097 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 6098 6099 struct wmi_10_4_tim_info { 6100 __le32 tim_len; 6101 __le32 tim_mcast; 6102 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 6103 __le32 tim_changed; 6104 __le32 tim_num_ps_pending; 6105 } __packed; 6106 6107 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 6108 6109 struct wmi_10_4_p2p_noa_info { 6110 /* Bit 0 - Flag to indicate an update in NOA schedule 6111 * Bits 7-1 - Reserved 6112 */ 6113 u8 changed; 6114 /* NOA index */ 6115 u8 index; 6116 /* Bit 0 - Opp PS state of the AP 6117 * Bits 1-7 - Ctwindow in TUs 6118 */ 6119 u8 ctwindow_oppps; 6120 /* Number of NOA descriptors */ 6121 u8 num_descriptors; 6122 6123 struct wmi_p2p_noa_descriptor 6124 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6125 } __packed; 6126 6127 struct wmi_10_4_bcn_info { 6128 struct wmi_10_4_tim_info tim_info; 6129 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6130 } __packed; 6131 6132 struct wmi_10_4_host_swba_event { 6133 __le32 vdev_map; 6134 struct wmi_10_4_bcn_info bcn_info[0]; 6135 } __packed; 6136 6137 #define WMI_MAX_AP_VDEV 16 6138 6139 struct wmi_tbtt_offset_event { 6140 __le32 vdev_map; 6141 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6142 } __packed; 6143 6144 struct wmi_peer_create_cmd { 6145 __le32 vdev_id; 6146 struct wmi_mac_addr peer_macaddr; 6147 __le32 peer_type; 6148 } __packed; 6149 6150 enum wmi_peer_type { 6151 WMI_PEER_TYPE_DEFAULT = 0, 6152 WMI_PEER_TYPE_BSS = 1, 6153 WMI_PEER_TYPE_TDLS = 2, 6154 }; 6155 6156 struct wmi_peer_delete_cmd { 6157 __le32 vdev_id; 6158 struct wmi_mac_addr peer_macaddr; 6159 } __packed; 6160 6161 struct wmi_peer_flush_tids_cmd { 6162 __le32 vdev_id; 6163 struct wmi_mac_addr peer_macaddr; 6164 __le32 peer_tid_bitmap; 6165 } __packed; 6166 6167 struct wmi_fixed_rate { 6168 /* 6169 * rate mode . 0: disable fixed rate (auto rate) 6170 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6171 * 2: ht20 11n rate specified as mcs index 6172 * 3: ht40 11n rate specified as mcs index 6173 */ 6174 __le32 rate_mode; 6175 /* 6176 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6177 * and series 3 is stored at byte 3 (MSB) 6178 */ 6179 __le32 rate_series; 6180 /* 6181 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6182 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6183 * (MSB) 6184 */ 6185 __le32 rate_retries; 6186 } __packed; 6187 6188 struct wmi_peer_fixed_rate_cmd { 6189 /* unique id identifying the VDEV, generated by the caller */ 6190 __le32 vdev_id; 6191 /* peer MAC address */ 6192 struct wmi_mac_addr peer_macaddr; 6193 /* fixed rate */ 6194 struct wmi_fixed_rate peer_fixed_rate; 6195 } __packed; 6196 6197 #define WMI_MGMT_TID 17 6198 6199 struct wmi_addba_clear_resp_cmd { 6200 /* unique id identifying the VDEV, generated by the caller */ 6201 __le32 vdev_id; 6202 /* peer MAC address */ 6203 struct wmi_mac_addr peer_macaddr; 6204 } __packed; 6205 6206 struct wmi_addba_send_cmd { 6207 /* unique id identifying the VDEV, generated by the caller */ 6208 __le32 vdev_id; 6209 /* peer MAC address */ 6210 struct wmi_mac_addr peer_macaddr; 6211 /* Tid number */ 6212 __le32 tid; 6213 /* Buffer/Window size*/ 6214 __le32 buffersize; 6215 } __packed; 6216 6217 struct wmi_delba_send_cmd { 6218 /* unique id identifying the VDEV, generated by the caller */ 6219 __le32 vdev_id; 6220 /* peer MAC address */ 6221 struct wmi_mac_addr peer_macaddr; 6222 /* Tid number */ 6223 __le32 tid; 6224 /* Is Initiator */ 6225 __le32 initiator; 6226 /* Reason code */ 6227 __le32 reasoncode; 6228 } __packed; 6229 6230 struct wmi_addba_setresponse_cmd { 6231 /* unique id identifying the vdev, generated by the caller */ 6232 __le32 vdev_id; 6233 /* peer mac address */ 6234 struct wmi_mac_addr peer_macaddr; 6235 /* Tid number */ 6236 __le32 tid; 6237 /* status code */ 6238 __le32 statuscode; 6239 } __packed; 6240 6241 struct wmi_send_singleamsdu_cmd { 6242 /* unique id identifying the vdev, generated by the caller */ 6243 __le32 vdev_id; 6244 /* peer mac address */ 6245 struct wmi_mac_addr peer_macaddr; 6246 /* Tid number */ 6247 __le32 tid; 6248 } __packed; 6249 6250 enum wmi_peer_smps_state { 6251 WMI_PEER_SMPS_PS_NONE = 0x0, 6252 WMI_PEER_SMPS_STATIC = 0x1, 6253 WMI_PEER_SMPS_DYNAMIC = 0x2 6254 }; 6255 6256 enum wmi_peer_chwidth { 6257 WMI_PEER_CHWIDTH_20MHZ = 0, 6258 WMI_PEER_CHWIDTH_40MHZ = 1, 6259 WMI_PEER_CHWIDTH_80MHZ = 2, 6260 WMI_PEER_CHWIDTH_160MHZ = 3, 6261 }; 6262 6263 enum wmi_peer_param { 6264 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6265 WMI_PEER_AMPDU = 0x2, 6266 WMI_PEER_AUTHORIZE = 0x3, 6267 WMI_PEER_CHAN_WIDTH = 0x4, 6268 WMI_PEER_NSS = 0x5, 6269 WMI_PEER_USE_4ADDR = 0x6, 6270 WMI_PEER_USE_FIXED_PWR = 0x8, 6271 WMI_PEER_PARAM_FIXED_RATE = 0x9, 6272 WMI_PEER_DEBUG = 0xa, 6273 WMI_PEER_PHYMODE = 0xd, 6274 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6275 }; 6276 6277 struct wmi_peer_set_param_cmd { 6278 __le32 vdev_id; 6279 struct wmi_mac_addr peer_macaddr; 6280 __le32 param_id; 6281 __le32 param_value; 6282 } __packed; 6283 6284 #define MAX_SUPPORTED_RATES 128 6285 6286 struct wmi_rate_set { 6287 /* total number of rates */ 6288 __le32 num_rates; 6289 /* 6290 * rates (each 8bit value) packed into a 32 bit word. 6291 * the rates are filled from least significant byte to most 6292 * significant byte. 6293 */ 6294 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6295 } __packed; 6296 6297 struct wmi_rate_set_arg { 6298 unsigned int num_rates; 6299 u8 rates[MAX_SUPPORTED_RATES]; 6300 }; 6301 6302 /* 6303 * NOTE: It would bea good idea to represent the Tx MCS 6304 * info in one word and Rx in another word. This is split 6305 * into multiple words for convenience 6306 */ 6307 struct wmi_vht_rate_set { 6308 __le32 rx_max_rate; /* Max Rx data rate */ 6309 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6310 __le32 tx_max_rate; /* Max Tx data rate */ 6311 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6312 } __packed; 6313 6314 struct wmi_vht_rate_set_arg { 6315 u32 rx_max_rate; 6316 u32 rx_mcs_set; 6317 u32 tx_max_rate; 6318 u32 tx_mcs_set; 6319 }; 6320 6321 struct wmi_peer_set_rates_cmd { 6322 /* peer MAC address */ 6323 struct wmi_mac_addr peer_macaddr; 6324 /* legacy rate set */ 6325 struct wmi_rate_set peer_legacy_rates; 6326 /* ht rate set */ 6327 struct wmi_rate_set peer_ht_rates; 6328 } __packed; 6329 6330 struct wmi_peer_set_q_empty_callback_cmd { 6331 /* unique id identifying the VDEV, generated by the caller */ 6332 __le32 vdev_id; 6333 /* peer MAC address */ 6334 struct wmi_mac_addr peer_macaddr; 6335 __le32 callback_enable; 6336 } __packed; 6337 6338 struct wmi_peer_flags_map { 6339 u32 auth; 6340 u32 qos; 6341 u32 need_ptk_4_way; 6342 u32 need_gtk_2_way; 6343 u32 apsd; 6344 u32 ht; 6345 u32 bw40; 6346 u32 stbc; 6347 u32 ldbc; 6348 u32 dyn_mimops; 6349 u32 static_mimops; 6350 u32 spatial_mux; 6351 u32 vht; 6352 u32 bw80; 6353 u32 vht_2g; 6354 u32 pmf; 6355 u32 bw160; 6356 }; 6357 6358 enum wmi_peer_flags { 6359 WMI_PEER_AUTH = 0x00000001, 6360 WMI_PEER_QOS = 0x00000002, 6361 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6362 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6363 WMI_PEER_APSD = 0x00000800, 6364 WMI_PEER_HT = 0x00001000, 6365 WMI_PEER_40MHZ = 0x00002000, 6366 WMI_PEER_STBC = 0x00008000, 6367 WMI_PEER_LDPC = 0x00010000, 6368 WMI_PEER_DYN_MIMOPS = 0x00020000, 6369 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6370 WMI_PEER_SPATIAL_MUX = 0x00200000, 6371 WMI_PEER_VHT = 0x02000000, 6372 WMI_PEER_80MHZ = 0x04000000, 6373 WMI_PEER_VHT_2G = 0x08000000, 6374 WMI_PEER_PMF = 0x10000000, 6375 WMI_PEER_160MHZ = 0x20000000 6376 }; 6377 6378 enum wmi_10x_peer_flags { 6379 WMI_10X_PEER_AUTH = 0x00000001, 6380 WMI_10X_PEER_QOS = 0x00000002, 6381 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6382 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6383 WMI_10X_PEER_APSD = 0x00000800, 6384 WMI_10X_PEER_HT = 0x00001000, 6385 WMI_10X_PEER_40MHZ = 0x00002000, 6386 WMI_10X_PEER_STBC = 0x00008000, 6387 WMI_10X_PEER_LDPC = 0x00010000, 6388 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6389 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6390 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6391 WMI_10X_PEER_VHT = 0x02000000, 6392 WMI_10X_PEER_80MHZ = 0x04000000, 6393 WMI_10X_PEER_160MHZ = 0x20000000 6394 }; 6395 6396 enum wmi_10_2_peer_flags { 6397 WMI_10_2_PEER_AUTH = 0x00000001, 6398 WMI_10_2_PEER_QOS = 0x00000002, 6399 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6400 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6401 WMI_10_2_PEER_APSD = 0x00000800, 6402 WMI_10_2_PEER_HT = 0x00001000, 6403 WMI_10_2_PEER_40MHZ = 0x00002000, 6404 WMI_10_2_PEER_STBC = 0x00008000, 6405 WMI_10_2_PEER_LDPC = 0x00010000, 6406 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6407 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6408 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6409 WMI_10_2_PEER_VHT = 0x02000000, 6410 WMI_10_2_PEER_80MHZ = 0x04000000, 6411 WMI_10_2_PEER_VHT_2G = 0x08000000, 6412 WMI_10_2_PEER_PMF = 0x10000000, 6413 WMI_10_2_PEER_160MHZ = 0x20000000 6414 }; 6415 6416 /* 6417 * Peer rate capabilities. 6418 * 6419 * This is of interest to the ratecontrol 6420 * module which resides in the firmware. The bit definitions are 6421 * consistent with that defined in if_athrate.c. 6422 */ 6423 #define WMI_RC_DS_FLAG 0x01 6424 #define WMI_RC_CW40_FLAG 0x02 6425 #define WMI_RC_SGI_FLAG 0x04 6426 #define WMI_RC_HT_FLAG 0x08 6427 #define WMI_RC_RTSCTS_FLAG 0x10 6428 #define WMI_RC_TX_STBC_FLAG 0x20 6429 #define WMI_RC_RX_STBC_FLAG 0xC0 6430 #define WMI_RC_RX_STBC_FLAG_S 6 6431 #define WMI_RC_WEP_TKIP_FLAG 0x100 6432 #define WMI_RC_TS_FLAG 0x200 6433 #define WMI_RC_UAPSD_FLAG 0x400 6434 6435 /* Maximum listen interval supported by hw in units of beacon interval */ 6436 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6437 6438 struct wmi_common_peer_assoc_complete_cmd { 6439 struct wmi_mac_addr peer_macaddr; 6440 __le32 vdev_id; 6441 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6442 __le32 peer_associd; /* 16 LSBs */ 6443 __le32 peer_flags; 6444 __le32 peer_caps; /* 16 LSBs */ 6445 __le32 peer_listen_intval; 6446 __le32 peer_ht_caps; 6447 __le32 peer_max_mpdu; 6448 __le32 peer_mpdu_density; /* 0..16 */ 6449 __le32 peer_rate_caps; 6450 struct wmi_rate_set peer_legacy_rates; 6451 struct wmi_rate_set peer_ht_rates; 6452 __le32 peer_nss; /* num of spatial streams */ 6453 __le32 peer_vht_caps; 6454 __le32 peer_phymode; 6455 struct wmi_vht_rate_set peer_vht_rates; 6456 }; 6457 6458 struct wmi_main_peer_assoc_complete_cmd { 6459 struct wmi_common_peer_assoc_complete_cmd cmd; 6460 6461 /* HT Operation Element of the peer. Five bytes packed in 2 6462 * INT32 array and filled from lsb to msb. 6463 */ 6464 __le32 peer_ht_info[2]; 6465 } __packed; 6466 6467 struct wmi_10_1_peer_assoc_complete_cmd { 6468 struct wmi_common_peer_assoc_complete_cmd cmd; 6469 } __packed; 6470 6471 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6472 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6473 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6474 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6475 6476 struct wmi_10_2_peer_assoc_complete_cmd { 6477 struct wmi_common_peer_assoc_complete_cmd cmd; 6478 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6479 } __packed; 6480 6481 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6482 6483 struct wmi_10_4_peer_assoc_complete_cmd { 6484 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6485 __le32 peer_bw_rxnss_override; 6486 } __packed; 6487 6488 struct wmi_peer_assoc_complete_arg { 6489 u8 addr[ETH_ALEN]; 6490 u32 vdev_id; 6491 bool peer_reassoc; 6492 u16 peer_aid; 6493 u32 peer_flags; /* see %WMI_PEER_ */ 6494 u16 peer_caps; 6495 u32 peer_listen_intval; 6496 u32 peer_ht_caps; 6497 u32 peer_max_mpdu; 6498 u32 peer_mpdu_density; /* 0..16 */ 6499 u32 peer_rate_caps; /* see %WMI_RC_ */ 6500 struct wmi_rate_set_arg peer_legacy_rates; 6501 struct wmi_rate_set_arg peer_ht_rates; 6502 u32 peer_num_spatial_streams; 6503 u32 peer_vht_caps; 6504 enum wmi_phy_mode peer_phymode; 6505 struct wmi_vht_rate_set_arg peer_vht_rates; 6506 u32 peer_bw_rxnss_override; 6507 }; 6508 6509 struct wmi_peer_add_wds_entry_cmd { 6510 /* peer MAC address */ 6511 struct wmi_mac_addr peer_macaddr; 6512 /* wds MAC addr */ 6513 struct wmi_mac_addr wds_macaddr; 6514 } __packed; 6515 6516 struct wmi_peer_remove_wds_entry_cmd { 6517 /* wds MAC addr */ 6518 struct wmi_mac_addr wds_macaddr; 6519 } __packed; 6520 6521 struct wmi_peer_q_empty_callback_event { 6522 /* peer MAC address */ 6523 struct wmi_mac_addr peer_macaddr; 6524 } __packed; 6525 6526 /* 6527 * Channel info WMI event 6528 */ 6529 struct wmi_chan_info_event { 6530 __le32 err_code; 6531 __le32 freq; 6532 __le32 cmd_flags; 6533 __le32 noise_floor; 6534 __le32 rx_clear_count; 6535 __le32 cycle_count; 6536 } __packed; 6537 6538 struct wmi_10_4_chan_info_event { 6539 __le32 err_code; 6540 __le32 freq; 6541 __le32 cmd_flags; 6542 __le32 noise_floor; 6543 __le32 rx_clear_count; 6544 __le32 cycle_count; 6545 __le32 chan_tx_pwr_range; 6546 __le32 chan_tx_pwr_tp; 6547 __le32 rx_frame_count; 6548 } __packed; 6549 6550 struct wmi_peer_sta_kickout_event { 6551 struct wmi_mac_addr peer_macaddr; 6552 } __packed; 6553 6554 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6555 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6556 6557 /* Beacon filter wmi command info */ 6558 #define BCN_FLT_MAX_SUPPORTED_IES 256 6559 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6560 6561 struct bss_bcn_stats { 6562 __le32 vdev_id; 6563 __le32 bss_bcnsdropped; 6564 __le32 bss_bcnsdelivered; 6565 } __packed; 6566 6567 struct bcn_filter_stats { 6568 __le32 bcns_dropped; 6569 __le32 bcns_delivered; 6570 __le32 activefilters; 6571 struct bss_bcn_stats bss_stats; 6572 } __packed; 6573 6574 struct wmi_add_bcn_filter_cmd { 6575 u32 vdev_id; 6576 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6577 } __packed; 6578 6579 enum wmi_sta_keepalive_method { 6580 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6581 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6582 }; 6583 6584 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6585 6586 /* Firmware crashes if keepalive interval exceeds this limit */ 6587 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6588 6589 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6590 struct wmi_sta_keepalive_arp_resp { 6591 __be32 src_ip4_addr; 6592 __be32 dest_ip4_addr; 6593 struct wmi_mac_addr dest_mac_addr; 6594 } __packed; 6595 6596 struct wmi_sta_keepalive_cmd { 6597 __le32 vdev_id; 6598 __le32 enabled; 6599 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6600 __le32 interval; /* in seconds */ 6601 struct wmi_sta_keepalive_arp_resp arp_resp; 6602 } __packed; 6603 6604 struct wmi_sta_keepalive_arg { 6605 u32 vdev_id; 6606 u32 enabled; 6607 u32 method; 6608 u32 interval; 6609 __be32 src_ip4_addr; 6610 __be32 dest_ip4_addr; 6611 const u8 dest_mac_addr[ETH_ALEN]; 6612 }; 6613 6614 enum wmi_force_fw_hang_type { 6615 WMI_FORCE_FW_HANG_ASSERT = 1, 6616 WMI_FORCE_FW_HANG_NO_DETECT, 6617 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6618 WMI_FORCE_FW_HANG_EMPTY_POINT, 6619 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6620 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6621 }; 6622 6623 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6624 6625 struct wmi_force_fw_hang_cmd { 6626 __le32 type; 6627 __le32 delay_ms; 6628 } __packed; 6629 6630 enum wmi_pdev_reset_mode_type { 6631 WMI_RST_MODE_TX_FLUSH = 1, 6632 WMI_RST_MODE_WARM_RESET, 6633 WMI_RST_MODE_COLD_RESET, 6634 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6635 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6636 WMI_RST_MODE_MAX, 6637 }; 6638 6639 enum ath10k_dbglog_level { 6640 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6641 ATH10K_DBGLOG_LEVEL_INFO = 1, 6642 ATH10K_DBGLOG_LEVEL_WARN = 2, 6643 ATH10K_DBGLOG_LEVEL_ERR = 3, 6644 }; 6645 6646 /* VAP ids to enable dbglog */ 6647 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6648 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6649 6650 /* to enable dbglog in the firmware */ 6651 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6652 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6653 6654 /* timestamp resolution */ 6655 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6656 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6657 6658 /* number of queued messages before sending them to the host */ 6659 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6660 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6661 6662 /* 6663 * Log levels to enable. This defines the minimum level to enable, this is 6664 * not a bitmask. See enum ath10k_dbglog_level for the values. 6665 */ 6666 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6667 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6668 6669 /* 6670 * Note: this is a cleaned up version of a struct firmware uses. For 6671 * example, config_valid was hidden inside an array. 6672 */ 6673 struct wmi_dbglog_cfg_cmd { 6674 /* bitmask to hold mod id config*/ 6675 __le32 module_enable; 6676 6677 /* see ATH10K_DBGLOG_CFG_ */ 6678 __le32 config_enable; 6679 6680 /* mask of module id bits to be changed */ 6681 __le32 module_valid; 6682 6683 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6684 __le32 config_valid; 6685 } __packed; 6686 6687 struct wmi_10_4_dbglog_cfg_cmd { 6688 /* bitmask to hold mod id config*/ 6689 __le64 module_enable; 6690 6691 /* see ATH10K_DBGLOG_CFG_ */ 6692 __le32 config_enable; 6693 6694 /* mask of module id bits to be changed */ 6695 __le64 module_valid; 6696 6697 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6698 __le32 config_valid; 6699 } __packed; 6700 6701 enum wmi_roam_reason { 6702 WMI_ROAM_REASON_BETTER_AP = 1, 6703 WMI_ROAM_REASON_BEACON_MISS = 2, 6704 WMI_ROAM_REASON_LOW_RSSI = 3, 6705 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6706 WMI_ROAM_REASON_HO_FAILED = 5, 6707 6708 /* keep last */ 6709 WMI_ROAM_REASON_MAX, 6710 }; 6711 6712 struct wmi_roam_ev { 6713 __le32 vdev_id; 6714 __le32 reason; 6715 } __packed; 6716 6717 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6718 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6719 6720 #define WMI_MAX_EVENT 0x1000 6721 /* Maximum number of pending TXed WMI packets */ 6722 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6723 6724 /* By default disable power save for IBSS */ 6725 #define ATH10K_DEFAULT_ATIM 0 6726 6727 #define WMI_MAX_MEM_REQS 16 6728 6729 struct wmi_scan_ev_arg { 6730 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6731 __le32 reason; /* %WMI_SCAN_REASON_ */ 6732 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6733 __le32 scan_req_id; 6734 __le32 scan_id; 6735 __le32 vdev_id; 6736 }; 6737 6738 struct mgmt_tx_compl_params { 6739 u32 desc_id; 6740 u32 status; 6741 u32 ppdu_id; 6742 int ack_rssi; 6743 }; 6744 6745 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6746 __le32 desc_id; 6747 __le32 status; 6748 __le32 pdev_id; 6749 __le32 ppdu_id; 6750 __le32 ack_rssi; 6751 }; 6752 6753 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { 6754 __le32 num_reports; 6755 const __le32 *desc_ids; 6756 const __le32 *status; 6757 const __le32 *ppdu_ids; 6758 const __le32 *ack_rssi; 6759 }; 6760 6761 struct wmi_peer_delete_resp_ev_arg { 6762 __le32 vdev_id; 6763 struct wmi_mac_addr peer_addr; 6764 }; 6765 6766 struct wmi_mgmt_rx_ev_arg { 6767 __le32 channel; 6768 __le32 snr; 6769 __le32 rate; 6770 __le32 phy_mode; 6771 __le32 buf_len; 6772 __le32 status; /* %WMI_RX_STATUS_ */ 6773 struct wmi_mgmt_rx_ext_info ext_info; 6774 }; 6775 6776 struct wmi_ch_info_ev_arg { 6777 __le32 err_code; 6778 __le32 freq; 6779 __le32 cmd_flags; 6780 __le32 noise_floor; 6781 __le32 rx_clear_count; 6782 __le32 cycle_count; 6783 __le32 chan_tx_pwr_range; 6784 __le32 chan_tx_pwr_tp; 6785 __le32 rx_frame_count; 6786 __le32 my_bss_rx_cycle_count; 6787 __le32 rx_11b_mode_data_duration; 6788 __le32 tx_frame_cnt; 6789 __le32 mac_clk_mhz; 6790 }; 6791 6792 /* From 10.4 firmware, not sure all have the same values. */ 6793 enum wmi_vdev_start_status { 6794 WMI_VDEV_START_OK = 0, 6795 WMI_VDEV_START_CHAN_INVALID, 6796 }; 6797 6798 struct wmi_vdev_start_ev_arg { 6799 __le32 vdev_id; 6800 __le32 req_id; 6801 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6802 __le32 status; /* See wmi_vdev_start_status enum above */ 6803 }; 6804 6805 struct wmi_peer_kick_ev_arg { 6806 const u8 *mac_addr; 6807 }; 6808 6809 struct wmi_swba_ev_arg { 6810 __le32 vdev_map; 6811 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6812 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6813 }; 6814 6815 struct wmi_phyerr_ev_arg { 6816 u32 tsf_timestamp; 6817 u16 freq1; 6818 u16 freq2; 6819 u8 rssi_combined; 6820 u8 chan_width_mhz; 6821 u8 phy_err_code; 6822 u16 nf_chains[4]; 6823 u32 buf_len; 6824 const u8 *buf; 6825 u8 hdr_len; 6826 }; 6827 6828 struct wmi_phyerr_hdr_arg { 6829 u32 num_phyerrs; 6830 u32 tsf_l32; 6831 u32 tsf_u32; 6832 u32 buf_len; 6833 const void *phyerrs; 6834 }; 6835 6836 struct wmi_dfs_status_ev_arg { 6837 u32 status; 6838 }; 6839 6840 struct wmi_svc_rdy_ev_arg { 6841 __le32 min_tx_power; 6842 __le32 max_tx_power; 6843 __le32 ht_cap; 6844 __le32 vht_cap; 6845 __le32 sw_ver0; 6846 __le32 sw_ver1; 6847 __le32 fw_build; 6848 __le32 phy_capab; 6849 __le32 num_rf_chains; 6850 __le32 eeprom_rd; 6851 __le32 num_mem_reqs; 6852 __le32 low_5ghz_chan; 6853 __le32 high_5ghz_chan; 6854 const __le32 *service_map; 6855 size_t service_map_len; 6856 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6857 }; 6858 6859 struct wmi_svc_avail_ev_arg { 6860 __le32 service_map_ext_len; 6861 const __le32 *service_map_ext; 6862 }; 6863 6864 struct wmi_rdy_ev_arg { 6865 __le32 sw_version; 6866 __le32 abi_version; 6867 __le32 status; 6868 const u8 *mac_addr; 6869 }; 6870 6871 struct wmi_roam_ev_arg { 6872 __le32 vdev_id; 6873 __le32 reason; 6874 __le32 rssi; 6875 }; 6876 6877 struct wmi_echo_ev_arg { 6878 __le32 value; 6879 }; 6880 6881 struct wmi_pdev_temperature_event { 6882 /* temperature value in Celcius degree */ 6883 __le32 temperature; 6884 } __packed; 6885 6886 struct wmi_pdev_bss_chan_info_event { 6887 __le32 freq; 6888 __le32 noise_floor; 6889 __le64 cycle_busy; 6890 __le64 cycle_total; 6891 __le64 cycle_tx; 6892 __le64 cycle_rx; 6893 __le64 cycle_rx_bss; 6894 __le32 reserved; 6895 } __packed; 6896 6897 /* WOW structures */ 6898 enum wmi_wow_wakeup_event { 6899 WOW_BMISS_EVENT = 0, 6900 WOW_BETTER_AP_EVENT, 6901 WOW_DEAUTH_RECVD_EVENT, 6902 WOW_MAGIC_PKT_RECVD_EVENT, 6903 WOW_GTK_ERR_EVENT, 6904 WOW_FOURWAY_HSHAKE_EVENT, 6905 WOW_EAPOL_RECVD_EVENT, 6906 WOW_NLO_DETECTED_EVENT, 6907 WOW_DISASSOC_RECVD_EVENT, 6908 WOW_PATTERN_MATCH_EVENT, 6909 WOW_CSA_IE_EVENT, 6910 WOW_PROBE_REQ_WPS_IE_EVENT, 6911 WOW_AUTH_REQ_EVENT, 6912 WOW_ASSOC_REQ_EVENT, 6913 WOW_HTT_EVENT, 6914 WOW_RA_MATCH_EVENT, 6915 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6916 WOW_IOAC_MAGIC_EVENT, 6917 WOW_IOAC_SHORT_EVENT, 6918 WOW_IOAC_EXTEND_EVENT, 6919 WOW_IOAC_TIMER_EVENT, 6920 WOW_DFS_PHYERR_RADAR_EVENT, 6921 WOW_BEACON_EVENT, 6922 WOW_CLIENT_KICKOUT_EVENT, 6923 WOW_EVENT_MAX, 6924 }; 6925 6926 #define C2S(x) case x: return #x 6927 6928 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6929 { 6930 switch (ev) { 6931 C2S(WOW_BMISS_EVENT); 6932 C2S(WOW_BETTER_AP_EVENT); 6933 C2S(WOW_DEAUTH_RECVD_EVENT); 6934 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6935 C2S(WOW_GTK_ERR_EVENT); 6936 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6937 C2S(WOW_EAPOL_RECVD_EVENT); 6938 C2S(WOW_NLO_DETECTED_EVENT); 6939 C2S(WOW_DISASSOC_RECVD_EVENT); 6940 C2S(WOW_PATTERN_MATCH_EVENT); 6941 C2S(WOW_CSA_IE_EVENT); 6942 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6943 C2S(WOW_AUTH_REQ_EVENT); 6944 C2S(WOW_ASSOC_REQ_EVENT); 6945 C2S(WOW_HTT_EVENT); 6946 C2S(WOW_RA_MATCH_EVENT); 6947 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6948 C2S(WOW_IOAC_MAGIC_EVENT); 6949 C2S(WOW_IOAC_SHORT_EVENT); 6950 C2S(WOW_IOAC_EXTEND_EVENT); 6951 C2S(WOW_IOAC_TIMER_EVENT); 6952 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6953 C2S(WOW_BEACON_EVENT); 6954 C2S(WOW_CLIENT_KICKOUT_EVENT); 6955 C2S(WOW_EVENT_MAX); 6956 default: 6957 return NULL; 6958 } 6959 } 6960 6961 enum wmi_wow_wake_reason { 6962 WOW_REASON_UNSPECIFIED = -1, 6963 WOW_REASON_NLOD = 0, 6964 WOW_REASON_AP_ASSOC_LOST, 6965 WOW_REASON_LOW_RSSI, 6966 WOW_REASON_DEAUTH_RECVD, 6967 WOW_REASON_DISASSOC_RECVD, 6968 WOW_REASON_GTK_HS_ERR, 6969 WOW_REASON_EAP_REQ, 6970 WOW_REASON_FOURWAY_HS_RECV, 6971 WOW_REASON_TIMER_INTR_RECV, 6972 WOW_REASON_PATTERN_MATCH_FOUND, 6973 WOW_REASON_RECV_MAGIC_PATTERN, 6974 WOW_REASON_P2P_DISC, 6975 WOW_REASON_WLAN_HB, 6976 WOW_REASON_CSA_EVENT, 6977 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6978 WOW_REASON_AUTH_REQ_RECV, 6979 WOW_REASON_ASSOC_REQ_RECV, 6980 WOW_REASON_HTT_EVENT, 6981 WOW_REASON_RA_MATCH, 6982 WOW_REASON_HOST_AUTO_SHUTDOWN, 6983 WOW_REASON_IOAC_MAGIC_EVENT, 6984 WOW_REASON_IOAC_SHORT_EVENT, 6985 WOW_REASON_IOAC_EXTEND_EVENT, 6986 WOW_REASON_IOAC_TIMER_EVENT, 6987 WOW_REASON_ROAM_HO, 6988 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6989 WOW_REASON_BEACON_RECV, 6990 WOW_REASON_CLIENT_KICKOUT_EVENT, 6991 WOW_REASON_DEBUG_TEST = 0xFF, 6992 }; 6993 6994 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6995 { 6996 switch (reason) { 6997 C2S(WOW_REASON_UNSPECIFIED); 6998 C2S(WOW_REASON_NLOD); 6999 C2S(WOW_REASON_AP_ASSOC_LOST); 7000 C2S(WOW_REASON_LOW_RSSI); 7001 C2S(WOW_REASON_DEAUTH_RECVD); 7002 C2S(WOW_REASON_DISASSOC_RECVD); 7003 C2S(WOW_REASON_GTK_HS_ERR); 7004 C2S(WOW_REASON_EAP_REQ); 7005 C2S(WOW_REASON_FOURWAY_HS_RECV); 7006 C2S(WOW_REASON_TIMER_INTR_RECV); 7007 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 7008 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 7009 C2S(WOW_REASON_P2P_DISC); 7010 C2S(WOW_REASON_WLAN_HB); 7011 C2S(WOW_REASON_CSA_EVENT); 7012 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 7013 C2S(WOW_REASON_AUTH_REQ_RECV); 7014 C2S(WOW_REASON_ASSOC_REQ_RECV); 7015 C2S(WOW_REASON_HTT_EVENT); 7016 C2S(WOW_REASON_RA_MATCH); 7017 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 7018 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 7019 C2S(WOW_REASON_IOAC_SHORT_EVENT); 7020 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 7021 C2S(WOW_REASON_IOAC_TIMER_EVENT); 7022 C2S(WOW_REASON_ROAM_HO); 7023 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 7024 C2S(WOW_REASON_BEACON_RECV); 7025 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 7026 C2S(WOW_REASON_DEBUG_TEST); 7027 default: 7028 return NULL; 7029 } 7030 } 7031 7032 #undef C2S 7033 7034 struct wmi_wow_ev_arg { 7035 u32 vdev_id; 7036 u32 flag; 7037 enum wmi_wow_wake_reason wake_reason; 7038 u32 data_len; 7039 }; 7040 7041 #define WOW_MIN_PATTERN_SIZE 1 7042 #define WOW_MAX_PATTERN_SIZE 148 7043 #define WOW_MAX_PKT_OFFSET 128 7044 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 7045 sizeof(struct rfc1042_hdr)) 7046 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 7047 offsetof(struct ieee80211_hdr_3addr, addr1)) 7048 7049 enum wmi_tdls_state { 7050 WMI_TDLS_DISABLE, 7051 WMI_TDLS_ENABLE_PASSIVE, 7052 WMI_TDLS_ENABLE_ACTIVE, 7053 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 7054 }; 7055 7056 enum wmi_tdls_peer_state { 7057 WMI_TDLS_PEER_STATE_PEERING, 7058 WMI_TDLS_PEER_STATE_CONNECTED, 7059 WMI_TDLS_PEER_STATE_TEARDOWN, 7060 }; 7061 7062 struct wmi_tdls_peer_update_cmd_arg { 7063 u32 vdev_id; 7064 enum wmi_tdls_peer_state peer_state; 7065 u8 addr[ETH_ALEN]; 7066 }; 7067 7068 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 7069 7070 #define WMI_TDLS_PEER_SP_MASK 0x60 7071 #define WMI_TDLS_PEER_SP_LSB 5 7072 7073 enum wmi_tdls_options { 7074 WMI_TDLS_OFFCHAN_EN = BIT(0), 7075 WMI_TDLS_BUFFER_STA_EN = BIT(1), 7076 WMI_TDLS_SLEEP_STA_EN = BIT(2), 7077 }; 7078 7079 enum { 7080 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 7081 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 7082 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 7083 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 7084 }; 7085 7086 struct wmi_tdls_peer_capab_arg { 7087 u8 peer_uapsd_queues; 7088 u8 peer_max_sp; 7089 u32 buff_sta_support; 7090 u32 off_chan_support; 7091 u32 peer_curr_operclass; 7092 u32 self_curr_operclass; 7093 u32 peer_chan_len; 7094 u32 peer_operclass_len; 7095 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7096 u32 is_peer_responder; 7097 u32 pref_offchan_num; 7098 u32 pref_offchan_bw; 7099 }; 7100 7101 struct wmi_10_4_tdls_set_state_cmd { 7102 __le32 vdev_id; 7103 __le32 state; 7104 __le32 notification_interval_ms; 7105 __le32 tx_discovery_threshold; 7106 __le32 tx_teardown_threshold; 7107 __le32 rssi_teardown_threshold; 7108 __le32 rssi_delta; 7109 __le32 tdls_options; 7110 __le32 tdls_peer_traffic_ind_window; 7111 __le32 tdls_peer_traffic_response_timeout_ms; 7112 __le32 tdls_puapsd_mask; 7113 __le32 tdls_puapsd_inactivity_time_ms; 7114 __le32 tdls_puapsd_rx_frame_threshold; 7115 __le32 teardown_notification_ms; 7116 __le32 tdls_peer_kickout_threshold; 7117 } __packed; 7118 7119 struct wmi_tdls_peer_capabilities { 7120 __le32 peer_qos; 7121 __le32 buff_sta_support; 7122 __le32 off_chan_support; 7123 __le32 peer_curr_operclass; 7124 __le32 self_curr_operclass; 7125 __le32 peer_chan_len; 7126 __le32 peer_operclass_len; 7127 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7128 __le32 is_peer_responder; 7129 __le32 pref_offchan_num; 7130 __le32 pref_offchan_bw; 7131 struct wmi_channel peer_chan_list[1]; 7132 } __packed; 7133 7134 struct wmi_10_4_tdls_peer_update_cmd { 7135 __le32 vdev_id; 7136 struct wmi_mac_addr peer_macaddr; 7137 __le32 peer_state; 7138 __le32 reserved[4]; 7139 struct wmi_tdls_peer_capabilities peer_capab; 7140 } __packed; 7141 7142 enum wmi_tdls_peer_reason { 7143 WMI_TDLS_TEARDOWN_REASON_TX, 7144 WMI_TDLS_TEARDOWN_REASON_RSSI, 7145 WMI_TDLS_TEARDOWN_REASON_SCAN, 7146 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 7147 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7148 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7149 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7150 WMI_TDLS_ENTER_BUF_STA, 7151 WMI_TDLS_EXIT_BUF_STA, 7152 WMI_TDLS_ENTER_BT_BUSY_MODE, 7153 WMI_TDLS_EXIT_BT_BUSY_MODE, 7154 WMI_TDLS_SCAN_STARTED_EVENT, 7155 WMI_TDLS_SCAN_COMPLETED_EVENT, 7156 }; 7157 7158 enum wmi_tdls_peer_notification { 7159 WMI_TDLS_SHOULD_DISCOVER, 7160 WMI_TDLS_SHOULD_TEARDOWN, 7161 WMI_TDLS_PEER_DISCONNECTED, 7162 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7163 }; 7164 7165 struct wmi_tdls_peer_event { 7166 struct wmi_mac_addr peer_macaddr; 7167 /* see enum wmi_tdls_peer_notification*/ 7168 __le32 peer_status; 7169 /* see enum wmi_tdls_peer_reason */ 7170 __le32 peer_reason; 7171 __le32 vdev_id; 7172 } __packed; 7173 7174 enum wmi_txbf_conf { 7175 WMI_TXBF_CONF_UNSUPPORTED, 7176 WMI_TXBF_CONF_BEFORE_ASSOC, 7177 WMI_TXBF_CONF_AFTER_ASSOC, 7178 }; 7179 7180 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7181 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7182 7183 struct wmi_pdev_set_adaptive_cca_params { 7184 __le32 enable; 7185 __le32 cca_detect_level; 7186 __le32 cca_detect_margin; 7187 } __packed; 7188 7189 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 7190 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 7191 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 7192 #define WMI_PNO_MAX_NETW_CHANNELS 26 7193 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 7194 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID 7195 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN 7196 7197 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ 7198 #define WMI_PNO_MAX_PB_REQ_SIZE 450 7199 7200 #define WMI_PNO_24G_DEFAULT_CH 1 7201 #define WMI_PNO_5G_DEFAULT_CH 36 7202 7203 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 7204 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 7205 7206 /* SSID broadcast type */ 7207 enum wmi_SSID_bcast_type { 7208 BCAST_UNKNOWN = 0, 7209 BCAST_NORMAL = 1, 7210 BCAST_HIDDEN = 2, 7211 }; 7212 7213 struct wmi_network_type { 7214 struct wmi_ssid ssid; 7215 u32 authentication; 7216 u32 encryption; 7217 u32 bcast_nw_type; 7218 u8 channel_count; 7219 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; 7220 s32 rssi_threshold; 7221 } __packed; 7222 7223 struct wmi_pno_scan_req { 7224 u8 enable; 7225 u8 vdev_id; 7226 u8 uc_networks_count; 7227 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; 7228 u32 fast_scan_period; 7229 u32 slow_scan_period; 7230 u8 fast_scan_max_cycles; 7231 7232 bool do_passive_scan; 7233 7234 u32 delay_start_time; 7235 u32 active_min_time; 7236 u32 active_max_time; 7237 u32 passive_min_time; 7238 u32 passive_max_time; 7239 7240 /* mac address randomization attributes */ 7241 u32 enable_pno_scan_randomization; 7242 u8 mac_addr[ETH_ALEN]; 7243 u8 mac_addr_mask[ETH_ALEN]; 7244 } __packed; 7245 7246 enum wmi_host_platform_type { 7247 WMI_HOST_PLATFORM_HIGH_PERF, 7248 WMI_HOST_PLATFORM_LOW_PERF, 7249 }; 7250 7251 enum wmi_bss_survey_req_type { 7252 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7253 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7254 }; 7255 7256 struct wmi_pdev_chan_info_req_cmd { 7257 __le32 type; 7258 __le32 reserved; 7259 } __packed; 7260 7261 /* bb timing register configurations */ 7262 struct wmi_bb_timing_cfg_arg { 7263 /* Tx_end to pa off timing */ 7264 u32 bb_tx_timing; 7265 7266 /* Tx_end to external pa off timing */ 7267 u32 bb_xpa_timing; 7268 }; 7269 7270 struct wmi_pdev_bb_timing_cfg_cmd { 7271 /* Tx_end to pa off timing */ 7272 __le32 bb_tx_timing; 7273 7274 /* Tx_end to external pa off timing */ 7275 __le32 bb_xpa_timing; 7276 } __packed; 7277 7278 struct ath10k; 7279 struct ath10k_vif; 7280 struct ath10k_fw_stats_pdev; 7281 struct ath10k_fw_stats_peer; 7282 struct ath10k_fw_stats; 7283 7284 int ath10k_wmi_attach(struct ath10k *ar); 7285 void ath10k_wmi_detach(struct ath10k *ar); 7286 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7287 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7288 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7289 7290 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7291 int ath10k_wmi_connect(struct ath10k *ar); 7292 7293 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7294 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7295 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7296 u32 cmd_id); 7297 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7298 7299 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7300 struct ath10k_fw_stats_pdev *dst); 7301 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7302 struct ath10k_fw_stats_pdev *dst); 7303 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7304 struct ath10k_fw_stats_pdev *dst); 7305 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7306 struct ath10k_fw_stats_pdev *dst); 7307 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7308 struct ath10k_fw_stats_peer *dst); 7309 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7310 struct wmi_host_mem_chunks *chunks); 7311 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7312 const struct wmi_start_scan_arg *arg); 7313 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7314 const struct wmi_wmm_params_arg *arg); 7315 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7316 const struct wmi_channel_arg *arg); 7317 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7318 7319 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7320 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7321 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7322 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); 7323 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7324 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7325 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7326 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7327 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7328 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7329 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7330 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7331 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7332 void ath10k_wmi_event_dfs(struct ath10k *ar, 7333 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7334 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7335 struct wmi_phyerr_ev_arg *phyerr, 7336 u64 tsf); 7337 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7338 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7339 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7340 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7341 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7342 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7343 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7344 struct sk_buff *skb); 7345 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7346 struct sk_buff *skb); 7347 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7348 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7349 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7350 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7351 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7352 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7353 struct sk_buff *skb); 7354 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7355 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7356 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7357 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7358 struct sk_buff *skb); 7359 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7360 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7361 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7362 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7363 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7364 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7365 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7366 int left_len, struct wmi_phyerr_ev_arg *arg); 7367 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7368 struct ath10k_fw_stats *fw_stats, 7369 char *buf); 7370 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7371 struct ath10k_fw_stats *fw_stats, 7372 char *buf); 7373 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7374 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7375 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7376 struct ath10k_fw_stats *fw_stats, 7377 char *buf); 7378 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7379 enum wmi_vdev_subtype subtype); 7380 int ath10k_wmi_barrier(struct ath10k *ar); 7381 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7382 u32 num_tx_chain); 7383 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7384 7385 #endif /* _WMI_H_ */ 7386