1# SPDX-License-Identifier: ISC 2config ATH9K_HW 3 tristate 4config ATH9K_COMMON 5 tristate 6 select ATH_COMMON 7config ATH9K_COMMON_DEBUG 8 bool 9config ATH9K_DFS_DEBUGFS 10 def_bool y 11 depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED 12 13config ATH9K_BTCOEX_SUPPORT 14 bool "Atheros bluetooth coexistence support" 15 depends on (ATH9K || ATH9K_HTC) 16 default y 17 ---help--- 18 Say Y, if you want to use the ath9k/ath9k_htc radios together with 19 Bluetooth modules in the same system. 20 21config ATH9K 22 tristate "Atheros 802.11n wireless cards support" 23 depends on MAC80211 && HAS_DMA 24 select ATH9K_HW 25 select MAC80211_LEDS 26 select LEDS_CLASS 27 select NEW_LEDS 28 select ATH9K_COMMON 29 ---help--- 30 This module adds support for wireless adapters based on 31 Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family 32 of chipsets. For a specific list of supported external 33 cards, laptops that already ship with these cards and 34 APs that come with these cards refer to ath9k wiki 35 products page: 36 37 http://wireless.kernel.org/en/users/Drivers/ath9k/products 38 39 If you choose to build a module, it'll be called ath9k. 40 41config ATH9K_PCI 42 bool "Atheros ath9k PCI/PCIe bus support" 43 default y 44 depends on ATH9K && PCI 45 ---help--- 46 This option enables the PCI bus support in ath9k. 47 48 Say Y, if you have a compatible PCI/PCIe wireless card. 49 50config ATH9K_AHB 51 bool "Atheros ath9k AHB bus support" 52 depends on ATH9K 53 default n 54 ---help--- 55 This option enables the AHB bus support in ath9k. 56 57 Say Y, if you have a SoC with a compatible built-in 58 wireless MAC. Say N if unsure. 59 60config ATH9K_DEBUGFS 61 bool "Atheros ath9k debugging" 62 depends on ATH9K && DEBUG_FS 63 select MAC80211_DEBUGFS 64 select ATH9K_COMMON_DEBUG 65 ---help--- 66 Say Y, if you need access to ath9k's statistics for 67 interrupts, rate control, etc. 68 69 Also required for changing debug message flags at run time and for 70 TX99. 71 72config ATH9K_STATION_STATISTICS 73 bool "Detailed station statistics" 74 depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS 75 select MAC80211_DEBUGFS 76 default n 77 ---help--- 78 This option enables detailed statistics for association stations. 79 80config ATH9K_TX99 81 bool "Atheros ath9k TX99 testing support" 82 depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS 83 default n 84 ---help--- 85 Say N. This should only be enabled on systems undergoing 86 certification testing and evaluation in a controlled environment. 87 Enabling this will only enable TX99 support, all other modes of 88 operation will be disabled. 89 90 TX99 support enables Specific Absorption Rate (SAR) testing. 91 SAR is the unit of measurement for the amount of radio frequency(RF) 92 absorbed by the body when using a wireless device. The RF exposure 93 limits used are expressed in the terms of SAR, which is a measure 94 of the electric and magnetic field strength and power density for 95 transmitters operating at frequencies from 300 kHz to 100 GHz. 96 Regulatory bodies around the world require that wireless device 97 be evaluated to meet the RF exposure limits set forth in the 98 governmental SAR regulations. 99 100config ATH9K_DFS_CERTIFIED 101 bool "Atheros DFS support for certified platforms" 102 depends on ATH9K && CFG80211_CERTIFICATION_ONUS 103 default n 104 ---help--- 105 This option enables DFS support for initiating radiation on 106 ath9k. There is no way to dynamically detect if a card was DFS 107 certified and as such this is left as a build time option. This 108 option should only be enabled by system integrators that can 109 guarantee that all the platforms that their kernel will run on 110 have obtained appropriate regulatory body certification for a 111 respective Atheros card by using ath9k on the target shipping 112 platforms. 113 114 This is currently only a placeholder for future DFS support, 115 as DFS support requires more components that still need to be 116 developed. At this point enabling this option won't do anything 117 except increase code size. 118 119config ATH9K_DYNACK 120 bool "Atheros ath9k ACK timeout estimation algorithm" 121 depends on ATH9K 122 default n 123 ---help--- 124 This option enables ath9k dynamic ACK timeout estimation algorithm 125 based on ACK frame RX timestamp, TX frame timestamp and frame 126 duration 127 128config ATH9K_WOW 129 bool "Wake on Wireless LAN support (EXPERIMENTAL)" 130 depends on ATH9K && PM 131 default n 132 ---help--- 133 This option enables Wake on Wireless LAN support for certain cards. 134 Currently, AR9462 is supported. 135 136config ATH9K_RFKILL 137 bool "Atheros ath9k rfkill support" if EXPERT 138 depends on ATH9K 139 depends on RFKILL=y || RFKILL=ATH9K 140 default y 141 help 142 Say Y to have ath9k poll the RF-Kill GPIO every couple of 143 seconds. Turn off to save power, but enable it if you have 144 a platform that can toggle the RF-Kill GPIO. 145 146config ATH9K_CHANNEL_CONTEXT 147 bool "Channel Context support" 148 depends on ATH9K 149 default n 150 ---help--- 151 This option enables channel context support in ath9k, which is needed 152 for multi-channel concurrency. Enable this if P2P PowerSave support 153 is required. 154 155config ATH9K_PCOEM 156 bool "Atheros ath9k support for PC OEM cards" if EXPERT 157 depends on ATH9K 158 default y 159 160config ATH9K_PCI_NO_EEPROM 161 tristate "Atheros ath9k pci loader for EEPROM-less chips" 162 depends on ATH9K_PCI 163 default n 164 help 165 This separate driver provides a loader in order to support the 166 AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have 167 their initialization data (which contains the real PCI Device ID 168 that ath9k will need) stored together with the calibration data out 169 of reach for the ath9k chip. 170 171 These devices are usually various network appliances, routers or 172 access Points and such. 173 174 If unsure say N. 175 176config ATH9K_HTC 177 tristate "Atheros HTC based wireless cards support" 178 depends on USB && MAC80211 179 select ATH9K_HW 180 select MAC80211_LEDS 181 select LEDS_CLASS 182 select NEW_LEDS 183 select ATH9K_COMMON 184 ---help--- 185 Support for Atheros HTC based cards. 186 Chipsets supported: AR9271 187 188 For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc 189 190 The built module will be ath9k_htc. 191 192config ATH9K_HTC_DEBUGFS 193 bool "Atheros ath9k_htc debugging" 194 depends on ATH9K_HTC && DEBUG_FS 195 select ATH9K_COMMON_DEBUG 196 ---help--- 197 Say Y, if you need access to ath9k_htc's statistics. 198 As well as access to the FFT/spectral data. 199 200config ATH9K_HWRNG 201 bool "Random number generator support" 202 depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K) 203 default n 204 ---help--- 205 This option incorporates the ADC register output as a source of 206 randomness into Linux entropy pool (/dev/urandom and /dev/random) 207 208 Say Y, feeds the entropy directly from the WiFi driver to the input 209 pool. 210 211config ATH9K_COMMON_SPECTRAL 212 bool "Atheros ath9k/ath9k_htc spectral scan support" 213 depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS 214 select RELAY 215 default n 216 ---help--- 217 Say Y to enable access to the FFT/spectral data via debugfs. 218