1 // SPDX-License-Identifier: ISC 2 /* 3 * Copyright (c) 2010 Broadcom Corporation 4 */ 5 6 #include <linux/kernel.h> 7 #include <linux/string.h> 8 #include <linux/netdevice.h> 9 #include <linux/module.h> 10 #include <linux/firmware.h> 11 #include <brcmu_wifi.h> 12 #include <brcmu_utils.h> 13 #include "core.h" 14 #include "bus.h" 15 #include "debug.h" 16 #include "fwil.h" 17 #include "fwil_types.h" 18 #include "tracepoint.h" 19 #include "common.h" 20 #include "of.h" 21 #include "firmware.h" 22 #include "chip.h" 23 24 MODULE_AUTHOR("Broadcom Corporation"); 25 MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); 26 MODULE_LICENSE("Dual BSD/GPL"); 27 28 #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 29 #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 30 31 /* default boost value for RSSI_DELTA in preferred join selection */ 32 #define BRCMF_JOIN_PREF_RSSI_BOOST 8 33 34 #define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ 35 36 static int brcmf_sdiod_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; 37 module_param_named(txglomsz, brcmf_sdiod_txglomsz, int, 0); 38 MODULE_PARM_DESC(txglomsz, "Maximum tx packet chain size [SDIO]"); 39 40 /* Debug level configuration. See debug.h for bits, sysfs modifiable */ 41 int brcmf_msg_level; 42 module_param_named(debug, brcmf_msg_level, int, 0600); 43 MODULE_PARM_DESC(debug, "Level of debug output"); 44 45 static int brcmf_p2p_enable; 46 module_param_named(p2pon, brcmf_p2p_enable, int, 0); 47 MODULE_PARM_DESC(p2pon, "Enable legacy p2p management functionality"); 48 49 static int brcmf_feature_disable; 50 module_param_named(feature_disable, brcmf_feature_disable, int, 0); 51 MODULE_PARM_DESC(feature_disable, "Disable features"); 52 53 static char brcmf_firmware_path[BRCMF_FW_ALTPATH_LEN]; 54 module_param_string(alternative_fw_path, brcmf_firmware_path, 55 BRCMF_FW_ALTPATH_LEN, 0400); 56 MODULE_PARM_DESC(alternative_fw_path, "Alternative firmware path"); 57 58 static int brcmf_fcmode; 59 module_param_named(fcmode, brcmf_fcmode, int, 0); 60 MODULE_PARM_DESC(fcmode, "Mode of firmware signalled flow control"); 61 62 static int brcmf_roamoff; 63 module_param_named(roamoff, brcmf_roamoff, int, 0400); 64 MODULE_PARM_DESC(roamoff, "Do not use internal roaming engine"); 65 66 static int brcmf_iapp_enable; 67 module_param_named(iapp, brcmf_iapp_enable, int, 0); 68 MODULE_PARM_DESC(iapp, "Enable partial support for the obsoleted Inter-Access Point Protocol"); 69 70 #ifdef DEBUG 71 /* always succeed brcmf_bus_started() */ 72 static int brcmf_ignore_probe_fail; 73 module_param_named(ignore_probe_fail, brcmf_ignore_probe_fail, int, 0); 74 MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging"); 75 #endif 76 77 static struct brcmfmac_platform_data *brcmfmac_pdata; 78 struct brcmf_mp_global_t brcmf_mp_global; 79 80 void brcmf_c_set_joinpref_default(struct brcmf_if *ifp) 81 { 82 struct brcmf_pub *drvr = ifp->drvr; 83 struct brcmf_join_pref_params join_pref_params[2]; 84 int err; 85 86 /* Setup join_pref to select target by RSSI (boost on 5GHz) */ 87 join_pref_params[0].type = BRCMF_JOIN_PREF_RSSI_DELTA; 88 join_pref_params[0].len = 2; 89 join_pref_params[0].rssi_gain = BRCMF_JOIN_PREF_RSSI_BOOST; 90 join_pref_params[0].band = WLC_BAND_5G; 91 92 join_pref_params[1].type = BRCMF_JOIN_PREF_RSSI; 93 join_pref_params[1].len = 2; 94 join_pref_params[1].rssi_gain = 0; 95 join_pref_params[1].band = 0; 96 err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params, 97 sizeof(join_pref_params)); 98 if (err) 99 bphy_err(drvr, "Set join_pref error (%d)\n", err); 100 } 101 102 static int brcmf_c_download(struct brcmf_if *ifp, u16 flag, 103 struct brcmf_dload_data_le *dload_buf, 104 u32 len, const char *var) 105 { 106 s32 err; 107 108 flag |= (DLOAD_HANDLER_VER << DLOAD_FLAG_VER_SHIFT); 109 dload_buf->flag = cpu_to_le16(flag); 110 dload_buf->dload_type = cpu_to_le16(DL_TYPE_CLM); 111 dload_buf->len = cpu_to_le32(len); 112 dload_buf->crc = cpu_to_le32(0); 113 114 err = brcmf_fil_iovar_data_set(ifp, var, dload_buf, 115 struct_size(dload_buf, data, len)); 116 117 return err; 118 } 119 120 static int brcmf_c_download_blob(struct brcmf_if *ifp, 121 const void *data, size_t size, 122 const char *loadvar, const char *statvar) 123 { 124 struct brcmf_pub *drvr = ifp->drvr; 125 struct brcmf_dload_data_le *chunk_buf; 126 u32 chunk_len; 127 u32 datalen; 128 u32 cumulative_len; 129 u16 dl_flag = DL_BEGIN; 130 u32 status; 131 s32 err; 132 133 brcmf_dbg(TRACE, "Enter\n"); 134 135 chunk_buf = kzalloc(struct_size(chunk_buf, data, MAX_CHUNK_LEN), 136 GFP_KERNEL); 137 if (!chunk_buf) { 138 err = -ENOMEM; 139 return -ENOMEM; 140 } 141 142 datalen = size; 143 cumulative_len = 0; 144 do { 145 if (datalen > MAX_CHUNK_LEN) { 146 chunk_len = MAX_CHUNK_LEN; 147 } else { 148 chunk_len = datalen; 149 dl_flag |= DL_END; 150 } 151 memcpy(chunk_buf->data, data + cumulative_len, chunk_len); 152 153 err = brcmf_c_download(ifp, dl_flag, chunk_buf, chunk_len, 154 loadvar); 155 156 dl_flag &= ~DL_BEGIN; 157 158 cumulative_len += chunk_len; 159 datalen -= chunk_len; 160 } while ((datalen > 0) && (err == 0)); 161 162 if (err) { 163 bphy_err(drvr, "%s (%zu byte file) failed (%d)\n", 164 loadvar, size, err); 165 /* Retrieve status and print */ 166 err = brcmf_fil_iovar_int_get(ifp, statvar, &status); 167 if (err) 168 bphy_err(drvr, "get %s failed (%d)\n", statvar, err); 169 else 170 brcmf_dbg(INFO, "%s=%d\n", statvar, status); 171 err = -EIO; 172 } 173 174 kfree(chunk_buf); 175 return err; 176 } 177 178 static int brcmf_c_process_clm_blob(struct brcmf_if *ifp) 179 { 180 struct brcmf_pub *drvr = ifp->drvr; 181 struct brcmf_bus *bus = drvr->bus_if; 182 const struct firmware *fw = NULL; 183 s32 err; 184 185 brcmf_dbg(TRACE, "Enter\n"); 186 187 err = brcmf_bus_get_blob(bus, &fw, BRCMF_BLOB_CLM); 188 if (err || !fw) { 189 brcmf_info("no clm_blob available (err=%d), device may have limited channels available\n", 190 err); 191 return 0; 192 } 193 194 err = brcmf_c_download_blob(ifp, fw->data, fw->size, 195 "clmload", "clmload_status"); 196 197 release_firmware(fw); 198 return err; 199 } 200 201 static int brcmf_c_process_txcap_blob(struct brcmf_if *ifp) 202 { 203 struct brcmf_pub *drvr = ifp->drvr; 204 struct brcmf_bus *bus = drvr->bus_if; 205 const struct firmware *fw = NULL; 206 s32 err; 207 208 brcmf_dbg(TRACE, "Enter\n"); 209 210 err = brcmf_bus_get_blob(bus, &fw, BRCMF_BLOB_TXCAP); 211 if (err || !fw) { 212 brcmf_info("no txcap_blob available (err=%d)\n", err); 213 return 0; 214 } 215 216 brcmf_info("TxCap blob found, loading\n"); 217 err = brcmf_c_download_blob(ifp, fw->data, fw->size, 218 "txcapload", "txcapload_status"); 219 220 release_firmware(fw); 221 return err; 222 } 223 224 int brcmf_c_set_cur_etheraddr(struct brcmf_if *ifp, const u8 *addr) 225 { 226 s32 err; 227 228 err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", addr, ETH_ALEN); 229 if (err < 0) 230 bphy_err(ifp->drvr, "Setting cur_etheraddr failed, %d\n", err); 231 232 return err; 233 } 234 235 /* On some boards there is no eeprom to hold the nvram, in this case instead 236 * a board specific nvram is loaded from /lib/firmware. On most boards the 237 * macaddr setting in the /lib/firmware nvram file is ignored because the 238 * wifibt chip has a unique MAC programmed into the chip itself. 239 * But in some cases the actual MAC from the /lib/firmware nvram file gets 240 * used, leading to MAC conflicts. 241 * The MAC addresses in the troublesome nvram files seem to all come from 242 * the same nvram file template, so we only need to check for 1 known 243 * address to detect this. 244 */ 245 static const u8 brcmf_default_mac_address[ETH_ALEN] = { 246 0x00, 0x90, 0x4c, 0xc5, 0x12, 0x38 247 }; 248 249 static int brcmf_c_process_cal_blob(struct brcmf_if *ifp) 250 { 251 struct brcmf_pub *drvr = ifp->drvr; 252 struct brcmf_mp_device *settings = drvr->settings; 253 s32 err; 254 255 brcmf_dbg(TRACE, "Enter\n"); 256 257 if (!settings->cal_blob || !settings->cal_size) 258 return 0; 259 260 brcmf_info("Calibration blob provided by platform, loading\n"); 261 err = brcmf_c_download_blob(ifp, settings->cal_blob, settings->cal_size, 262 "calload", "calload_status"); 263 return err; 264 } 265 266 int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) 267 { 268 struct brcmf_pub *drvr = ifp->drvr; 269 s8 eventmask[BRCMF_EVENTING_MASK_LEN]; 270 u8 buf[BRCMF_DCMD_SMLEN]; 271 struct brcmf_bus *bus; 272 struct brcmf_rev_info_le revinfo; 273 struct brcmf_rev_info *ri; 274 char *clmver; 275 char *ptr; 276 s32 err; 277 278 if (is_valid_ether_addr(ifp->mac_addr)) { 279 /* set mac address */ 280 err = brcmf_c_set_cur_etheraddr(ifp, ifp->mac_addr); 281 if (err < 0) 282 goto done; 283 } else { 284 /* retrieve mac address */ 285 err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr, 286 sizeof(ifp->mac_addr)); 287 if (err < 0) { 288 bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err); 289 goto done; 290 } 291 292 if (ether_addr_equal_unaligned(ifp->mac_addr, brcmf_default_mac_address)) { 293 bphy_err(drvr, "Default MAC is used, replacing with random MAC to avoid conflicts\n"); 294 eth_random_addr(ifp->mac_addr); 295 ifp->ndev->addr_assign_type = NET_ADDR_RANDOM; 296 err = brcmf_c_set_cur_etheraddr(ifp, ifp->mac_addr); 297 if (err < 0) 298 goto done; 299 } 300 } 301 302 memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac)); 303 memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN); 304 305 bus = ifp->drvr->bus_if; 306 ri = &ifp->drvr->revinfo; 307 308 err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO, 309 &revinfo, sizeof(revinfo)); 310 if (err < 0) { 311 bphy_err(drvr, "retrieving revision info failed, %d\n", err); 312 strscpy(ri->chipname, "UNKNOWN", sizeof(ri->chipname)); 313 } else { 314 ri->vendorid = le32_to_cpu(revinfo.vendorid); 315 ri->deviceid = le32_to_cpu(revinfo.deviceid); 316 ri->radiorev = le32_to_cpu(revinfo.radiorev); 317 ri->corerev = le32_to_cpu(revinfo.corerev); 318 ri->boardid = le32_to_cpu(revinfo.boardid); 319 ri->boardvendor = le32_to_cpu(revinfo.boardvendor); 320 ri->boardrev = le32_to_cpu(revinfo.boardrev); 321 ri->driverrev = le32_to_cpu(revinfo.driverrev); 322 ri->ucoderev = le32_to_cpu(revinfo.ucoderev); 323 ri->bus = le32_to_cpu(revinfo.bus); 324 ri->phytype = le32_to_cpu(revinfo.phytype); 325 ri->phyrev = le32_to_cpu(revinfo.phyrev); 326 ri->anarev = le32_to_cpu(revinfo.anarev); 327 ri->chippkg = le32_to_cpu(revinfo.chippkg); 328 ri->nvramrev = le32_to_cpu(revinfo.nvramrev); 329 330 /* use revinfo if not known yet */ 331 if (!bus->chip) { 332 bus->chip = le32_to_cpu(revinfo.chipnum); 333 bus->chiprev = le32_to_cpu(revinfo.chiprev); 334 } 335 } 336 ri->result = err; 337 338 if (bus->chip) 339 brcmf_chip_name(bus->chip, bus->chiprev, 340 ri->chipname, sizeof(ri->chipname)); 341 342 /* Do any CLM downloading */ 343 err = brcmf_c_process_clm_blob(ifp); 344 if (err < 0) { 345 bphy_err(drvr, "download CLM blob file failed, %d\n", err); 346 goto done; 347 } 348 349 /* Do TxCap downloading, if needed */ 350 err = brcmf_c_process_txcap_blob(ifp); 351 if (err < 0) { 352 bphy_err(drvr, "download TxCap blob file failed, %d\n", err); 353 goto done; 354 } 355 356 /* Download external calibration blob, if available */ 357 err = brcmf_c_process_cal_blob(ifp); 358 if (err < 0) { 359 bphy_err(drvr, "download calibration blob file failed, %d\n", err); 360 goto done; 361 } 362 363 /* query for 'ver' to get version info from firmware */ 364 memset(buf, 0, sizeof(buf)); 365 err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf)); 366 if (err < 0) { 367 bphy_err(drvr, "Retrieving version information failed, %d\n", 368 err); 369 goto done; 370 } 371 buf[sizeof(buf) - 1] = '\0'; 372 ptr = (char *)buf; 373 strsep(&ptr, "\n"); 374 375 /* Print fw version info */ 376 brcmf_info("Firmware: %s %s\n", ri->chipname, buf); 377 378 /* locate firmware version number for ethtool */ 379 ptr = strrchr(buf, ' '); 380 if (!ptr) { 381 bphy_err(drvr, "Retrieving version number failed"); 382 goto done; 383 } 384 strscpy(ifp->drvr->fwver, ptr + 1, sizeof(ifp->drvr->fwver)); 385 386 /* Query for 'clmver' to get CLM version info from firmware */ 387 memset(buf, 0, sizeof(buf)); 388 err = brcmf_fil_iovar_data_get(ifp, "clmver", buf, sizeof(buf)); 389 if (err) { 390 brcmf_dbg(TRACE, "retrieving clmver failed, %d\n", err); 391 } else { 392 buf[sizeof(buf) - 1] = '\0'; 393 clmver = (char *)buf; 394 395 /* Replace all newline/linefeed characters with space 396 * character 397 */ 398 strreplace(clmver, '\n', ' '); 399 400 /* store CLM version for adding it to revinfo debugfs file */ 401 memcpy(ifp->drvr->clmver, clmver, sizeof(ifp->drvr->clmver)); 402 403 brcmf_dbg(INFO, "CLM version = %s\n", clmver); 404 } 405 406 /* set mpc */ 407 err = brcmf_fil_iovar_int_set(ifp, "mpc", 1); 408 if (err) { 409 bphy_err(drvr, "failed setting mpc\n"); 410 goto done; 411 } 412 413 brcmf_c_set_joinpref_default(ifp); 414 415 /* Setup event_msgs, enable E_IF */ 416 err = brcmf_fil_iovar_data_get(ifp, "event_msgs", eventmask, 417 BRCMF_EVENTING_MASK_LEN); 418 if (err) { 419 bphy_err(drvr, "Get event_msgs error (%d)\n", err); 420 goto done; 421 } 422 setbit(eventmask, BRCMF_E_IF); 423 err = brcmf_fil_iovar_data_set(ifp, "event_msgs", eventmask, 424 BRCMF_EVENTING_MASK_LEN); 425 if (err) { 426 bphy_err(drvr, "Set event_msgs error (%d)\n", err); 427 goto done; 428 } 429 430 /* Setup default scan channel time */ 431 err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME, 432 BRCMF_DEFAULT_SCAN_CHANNEL_TIME); 433 if (err) { 434 bphy_err(drvr, "BRCMF_C_SET_SCAN_CHANNEL_TIME error (%d)\n", 435 err); 436 goto done; 437 } 438 439 /* Setup default scan unassoc time */ 440 err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME, 441 BRCMF_DEFAULT_SCAN_UNASSOC_TIME); 442 if (err) { 443 bphy_err(drvr, "BRCMF_C_SET_SCAN_UNASSOC_TIME error (%d)\n", 444 err); 445 goto done; 446 } 447 448 /* Enable tx beamforming, errors can be ignored (not supported) */ 449 (void)brcmf_fil_iovar_int_set(ifp, "txbf", 1); 450 done: 451 return err; 452 } 453 454 #ifndef CONFIG_BRCM_TRACING 455 void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...) 456 { 457 struct va_format vaf; 458 va_list args; 459 460 va_start(args, fmt); 461 462 vaf.fmt = fmt; 463 vaf.va = &args; 464 if (bus) 465 dev_err(bus->dev, "%s: %pV", func, &vaf); 466 else 467 pr_err("%s: %pV", func, &vaf); 468 469 va_end(args); 470 } 471 #endif 472 473 #if defined(CONFIG_BRCM_TRACING) || defined(CONFIG_BRCMDBG) 474 void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...) 475 { 476 struct va_format vaf = { 477 .fmt = fmt, 478 }; 479 va_list args; 480 481 va_start(args, fmt); 482 vaf.va = &args; 483 if (brcmf_msg_level & level) 484 pr_debug("%s %pV", func, &vaf); 485 trace_brcmf_dbg(level, func, &vaf); 486 va_end(args); 487 } 488 #endif 489 490 static void brcmf_mp_attach(void) 491 { 492 /* If module param firmware path is set then this will always be used, 493 * if not set then if available use the platform data version. To make 494 * sure it gets initialized at all, always copy the module param version 495 */ 496 strscpy(brcmf_mp_global.firmware_path, brcmf_firmware_path, 497 BRCMF_FW_ALTPATH_LEN); 498 if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) && 499 (brcmf_mp_global.firmware_path[0] == '\0')) { 500 strscpy(brcmf_mp_global.firmware_path, 501 brcmfmac_pdata->fw_alternative_path, 502 BRCMF_FW_ALTPATH_LEN); 503 } 504 } 505 506 struct brcmf_mp_device *brcmf_get_module_param(struct device *dev, 507 enum brcmf_bus_type bus_type, 508 u32 chip, u32 chiprev) 509 { 510 struct brcmf_mp_device *settings; 511 struct brcmfmac_pd_device *device_pd; 512 bool found; 513 int i; 514 515 brcmf_dbg(INFO, "Enter, bus=%d, chip=%d, rev=%d\n", bus_type, chip, 516 chiprev); 517 settings = kzalloc(sizeof(*settings), GFP_ATOMIC); 518 if (!settings) 519 return NULL; 520 521 /* start by using the module paramaters */ 522 settings->p2p_enable = !!brcmf_p2p_enable; 523 settings->feature_disable = brcmf_feature_disable; 524 settings->fcmode = brcmf_fcmode; 525 settings->roamoff = !!brcmf_roamoff; 526 settings->iapp = !!brcmf_iapp_enable; 527 #ifdef DEBUG 528 settings->ignore_probe_fail = !!brcmf_ignore_probe_fail; 529 #endif 530 531 if (bus_type == BRCMF_BUSTYPE_SDIO) 532 settings->bus.sdio.txglomsz = brcmf_sdiod_txglomsz; 533 534 /* See if there is any device specific platform data configured */ 535 found = false; 536 if (brcmfmac_pdata) { 537 for (i = 0; i < brcmfmac_pdata->device_count; i++) { 538 device_pd = &brcmfmac_pdata->devices[i]; 539 if ((device_pd->bus_type == bus_type) && 540 (device_pd->id == chip) && 541 ((device_pd->rev == chiprev) || 542 (device_pd->rev == -1))) { 543 brcmf_dbg(INFO, "Platform data for device found\n"); 544 settings->country_codes = 545 device_pd->country_codes; 546 if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO) 547 memcpy(&settings->bus.sdio, 548 &device_pd->bus.sdio, 549 sizeof(settings->bus.sdio)); 550 found = true; 551 break; 552 } 553 } 554 } 555 if (!found) { 556 /* No platform data for this device, try OF and DMI data */ 557 brcmf_dmi_probe(settings, chip, chiprev); 558 brcmf_of_probe(dev, bus_type, settings); 559 brcmf_acpi_probe(dev, bus_type, settings); 560 } 561 return settings; 562 } 563 564 void brcmf_release_module_param(struct brcmf_mp_device *module_param) 565 { 566 kfree(module_param); 567 } 568 569 static int __init brcmf_common_pd_probe(struct platform_device *pdev) 570 { 571 brcmf_dbg(INFO, "Enter\n"); 572 573 brcmfmac_pdata = dev_get_platdata(&pdev->dev); 574 575 if (brcmfmac_pdata->power_on) 576 brcmfmac_pdata->power_on(); 577 578 return 0; 579 } 580 581 static int brcmf_common_pd_remove(struct platform_device *pdev) 582 { 583 brcmf_dbg(INFO, "Enter\n"); 584 585 if (brcmfmac_pdata->power_off) 586 brcmfmac_pdata->power_off(); 587 588 return 0; 589 } 590 591 static struct platform_driver brcmf_pd = { 592 .remove = brcmf_common_pd_remove, 593 .driver = { 594 .name = BRCMFMAC_PDATA_NAME, 595 } 596 }; 597 598 static int __init brcmfmac_module_init(void) 599 { 600 int err; 601 602 /* Get the platform data (if available) for our devices */ 603 err = platform_driver_probe(&brcmf_pd, brcmf_common_pd_probe); 604 if (err == -ENODEV) 605 brcmf_dbg(INFO, "No platform data available.\n"); 606 607 /* Initialize global module paramaters */ 608 brcmf_mp_attach(); 609 610 /* Continue the initialization by registering the different busses */ 611 err = brcmf_core_init(); 612 if (err) { 613 if (brcmfmac_pdata) 614 platform_driver_unregister(&brcmf_pd); 615 } 616 617 return err; 618 } 619 620 static void __exit brcmfmac_module_exit(void) 621 { 622 brcmf_core_exit(); 623 if (brcmfmac_pdata) 624 platform_driver_unregister(&brcmf_pd); 625 } 626 627 module_init(brcmfmac_module_init); 628 module_exit(brcmfmac_module_exit); 629 630