1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10  * Copyright(c) 2016        Intel Deutschland GmbH
11  * Copyright (C) 2018 - 2019 Intel Corporation
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of version 2 of the GNU General Public License as
15  * published by the Free Software Foundation.
16  *
17  * This program is distributed in the hope that it will be useful, but
18  * WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
20  * General Public License for more details.
21  *
22  * The full GNU General Public License is included in this distribution
23  * in the file called COPYING.
24  *
25  * Contact Information:
26  *  Intel Linux Wireless <linuxwifi@intel.com>
27  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28  *
29  * BSD LICENSE
30  *
31  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
32  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
33  * Copyright(c) 2016        Intel Deutschland GmbH
34  * Copyright (C) 2018 - 2019 Intel Corporation
35  * All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  *
41  *  * Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  *  * Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in
45  *    the documentation and/or other materials provided with the
46  *    distribution.
47  *  * Neither the name Intel Corporation nor the names of its
48  *    contributors may be used to endorse or promote products derived
49  *    from this software without specific prior written permission.
50  *
51  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
52  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
53  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
54  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
55  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
56  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
57  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
58  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
59  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
60  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
61  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62  *****************************************************************************/
63 
64 #ifndef	__iwl_prph_h__
65 #define __iwl_prph_h__
66 #include <linux/bitfield.h>
67 
68 /*
69  * Registers in this file are internal, not PCI bus memory mapped.
70  * Driver accesses these via HBUS_TARG_PRPH_* registers.
71  */
72 #define PRPH_BASE	(0x00000)
73 #define PRPH_END	(0xFFFFF)
74 
75 /* APMG (power management) constants */
76 #define APMG_BASE			(PRPH_BASE + 0x3000)
77 #define APMG_CLK_CTRL_REG		(APMG_BASE + 0x0000)
78 #define APMG_CLK_EN_REG			(APMG_BASE + 0x0004)
79 #define APMG_CLK_DIS_REG		(APMG_BASE + 0x0008)
80 #define APMG_PS_CTRL_REG		(APMG_BASE + 0x000c)
81 #define APMG_PCIDEV_STT_REG		(APMG_BASE + 0x0010)
82 #define APMG_RFKILL_REG			(APMG_BASE + 0x0014)
83 #define APMG_RTC_INT_STT_REG		(APMG_BASE + 0x001c)
84 #define APMG_RTC_INT_MSK_REG		(APMG_BASE + 0x0020)
85 #define APMG_DIGITAL_SVR_REG		(APMG_BASE + 0x0058)
86 #define APMG_ANALOG_SVR_REG		(APMG_BASE + 0x006C)
87 
88 #define APMS_CLK_VAL_MRB_FUNC_MODE	(0x00000001)
89 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
90 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
91 
92 #define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
93 #define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
94 #define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)
95 #define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN		(0x00000000)
96 #define APMG_PS_CTRL_VAL_PWR_SRC_VAUX		(0x02000000)
97 #define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK	(0x000001E0) /* bit 8:5 */
98 #define APMG_SVR_DIGITAL_VOLTAGE_1_32		(0x00000060)
99 
100 #define APMG_PCIDEV_STT_VAL_PERSIST_DIS	(0x00000200)
101 #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS	(0x00000800)
102 #define APMG_PCIDEV_STT_VAL_WAKE_ME	(0x00004000)
103 
104 #define APMG_RTC_INT_STT_RFKILL		(0x10000000)
105 
106 /* Device system time */
107 #define DEVICE_SYSTEM_TIME_REG 0xA0206C
108 
109 /* Device NMI register and value for 8000 family and lower hw's */
110 #define DEVICE_SET_NMI_REG 0x00a01c30
111 #define DEVICE_SET_NMI_VAL_DRV BIT(7)
112 /* Device NMI register and value for 9000 family and above hw's */
113 #define UREG_NIC_SET_NMI_DRIVER 0x00a05c10
114 #define UREG_NIC_SET_NMI_DRIVER_NMI_FROM_DRIVER_MSK 0xff000000
115 
116 /* Shared registers (0x0..0x3ff, via target indirect or periphery */
117 #define SHR_BASE	0x00a10000
118 
119 /* Shared GP1 register */
120 #define SHR_APMG_GP1_REG		0x01dc
121 #define SHR_APMG_GP1_REG_PRPH		(SHR_BASE + SHR_APMG_GP1_REG)
122 #define SHR_APMG_GP1_WF_XTAL_LP_EN	0x00000004
123 #define SHR_APMG_GP1_CHICKEN_BIT_SELECT	0x80000000
124 
125 /* Shared DL_CFG register */
126 #define SHR_APMG_DL_CFG_REG			0x01c4
127 #define SHR_APMG_DL_CFG_REG_PRPH		(SHR_BASE + SHR_APMG_DL_CFG_REG)
128 #define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK	0x000000c0
129 #define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL	0x00000080
130 #define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP	0x00000100
131 
132 /* Shared APMG_XTAL_CFG register */
133 #define SHR_APMG_XTAL_CFG_REG		0x1c0
134 #define SHR_APMG_XTAL_CFG_XTAL_ON_REQ	0x80000000
135 
136 /*
137  * Device reset for family 8000
138  * write to bit 24 in order to reset the CPU
139 */
140 #define RELEASE_CPU_RESET		(0x300C)
141 #define RELEASE_CPU_RESET_BIT		BIT(24)
142 
143 /*****************************************************************************
144  *                        7000/3000 series SHR DTS addresses                 *
145  *****************************************************************************/
146 
147 #define SHR_MISC_WFM_DTS_EN	(0x00a10024)
148 #define DTSC_CFG_MODE		(0x00a10604)
149 #define DTSC_VREF_AVG		(0x00a10648)
150 #define DTSC_VREF5_AVG		(0x00a1064c)
151 #define DTSC_CFG_MODE_PERIODIC	(0x2)
152 #define DTSC_PTAT_AVG		(0x00a10650)
153 
154 
155 /**
156  * Tx Scheduler
157  *
158  * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
159  * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
160  * host DRAM.  It steers each frame's Tx command (which contains the frame
161  * data) into one of up to 7 prioritized Tx DMA FIFO channels within the
162  * device.  A queue maps to only one (selectable by driver) Tx DMA channel,
163  * but one DMA channel may take input from several queues.
164  *
165  * Tx DMA FIFOs have dedicated purposes.
166  *
167  * For 5000 series and up, they are used differently
168  * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
169  *
170  * 0 -- EDCA BK (background) frames, lowest priority
171  * 1 -- EDCA BE (best effort) frames, normal priority
172  * 2 -- EDCA VI (video) frames, higher priority
173  * 3 -- EDCA VO (voice) and management frames, highest priority
174  * 4 -- unused
175  * 5 -- unused
176  * 6 -- unused
177  * 7 -- Commands
178  *
179  * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
180  * In addition, driver can map the remaining queues to Tx DMA/FIFO
181  * channels 0-3 to support 11n aggregation via EDCA DMA channels.
182  *
183  * The driver sets up each queue to work in one of two modes:
184  *
185  * 1)  Scheduler-Ack, in which the scheduler automatically supports a
186  *     block-ack (BA) window of up to 64 TFDs.  In this mode, each queue
187  *     contains TFDs for a unique combination of Recipient Address (RA)
188  *     and Traffic Identifier (TID), that is, traffic of a given
189  *     Quality-Of-Service (QOS) priority, destined for a single station.
190  *
191  *     In scheduler-ack mode, the scheduler keeps track of the Tx status of
192  *     each frame within the BA window, including whether it's been transmitted,
193  *     and whether it's been acknowledged by the receiving station.  The device
194  *     automatically processes block-acks received from the receiving STA,
195  *     and reschedules un-acked frames to be retransmitted (successful
196  *     Tx completion may end up being out-of-order).
197  *
198  *     The driver must maintain the queue's Byte Count table in host DRAM
199  *     for this mode.
200  *     This mode does not support fragmentation.
201  *
202  * 2)  FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
203  *     The device may automatically retry Tx, but will retry only one frame
204  *     at a time, until receiving ACK from receiving station, or reaching
205  *     retry limit and giving up.
206  *
207  *     The command queue (#4/#9) must use this mode!
208  *     This mode does not require use of the Byte Count table in host DRAM.
209  *
210  * Driver controls scheduler operation via 3 means:
211  * 1)  Scheduler registers
212  * 2)  Shared scheduler data base in internal SRAM
213  * 3)  Shared data in host DRAM
214  *
215  * Initialization:
216  *
217  * When loading, driver should allocate memory for:
218  * 1)  16 TFD circular buffers, each with space for (typically) 256 TFDs.
219  * 2)  16 Byte Count circular buffers in 16 KBytes contiguous memory
220  *     (1024 bytes for each queue).
221  *
222  * After receiving "Alive" response from uCode, driver must initialize
223  * the scheduler (especially for queue #4/#9, the command queue, otherwise
224  * the driver can't issue commands!):
225  */
226 #define SCD_MEM_LOWER_BOUND		(0x0000)
227 
228 /**
229  * Max Tx window size is the max number of contiguous TFDs that the scheduler
230  * can keep track of at one time when creating block-ack chains of frames.
231  * Note that "64" matches the number of ack bits in a block-ack packet.
232  */
233 #define SCD_WIN_SIZE				64
234 #define SCD_FRAME_LIMIT				64
235 
236 #define SCD_TXFIFO_POS_TID			(0)
237 #define SCD_TXFIFO_POS_RA			(4)
238 #define SCD_QUEUE_RA_TID_MAP_RATID_MSK	(0x01FF)
239 
240 /* agn SCD */
241 #define SCD_QUEUE_STTS_REG_POS_TXF	(0)
242 #define SCD_QUEUE_STTS_REG_POS_ACTIVE	(3)
243 #define SCD_QUEUE_STTS_REG_POS_WSL	(4)
244 #define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
245 #define SCD_QUEUE_STTS_REG_MSK		(0x017F0000)
246 
247 #define SCD_QUEUE_CTX_REG1_CREDIT		(0x00FFFF00)
248 #define SCD_QUEUE_CTX_REG1_SUPER_CREDIT		(0xFF000000)
249 #define SCD_QUEUE_CTX_REG1_VAL(_n, _v)		FIELD_PREP(SCD_QUEUE_CTX_REG1_ ## _n, _v)
250 
251 #define SCD_QUEUE_CTX_REG2_WIN_SIZE		(0x0000007F)
252 #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT		(0x007F0000)
253 #define SCD_QUEUE_CTX_REG2_VAL(_n, _v)		FIELD_PREP(SCD_QUEUE_CTX_REG2_ ## _n, _v)
254 
255 #define SCD_GP_CTRL_ENABLE_31_QUEUES		BIT(0)
256 #define SCD_GP_CTRL_AUTO_ACTIVE_MODE		BIT(18)
257 
258 /* Context Data */
259 #define SCD_CONTEXT_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x600)
260 #define SCD_CONTEXT_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x6A0)
261 
262 /* Tx status */
263 #define SCD_TX_STTS_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x6A0)
264 #define SCD_TX_STTS_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x7E0)
265 
266 /* Translation Data */
267 #define SCD_TRANS_TBL_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x7E0)
268 #define SCD_TRANS_TBL_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x808)
269 
270 #define SCD_CONTEXT_QUEUE_OFFSET(x)\
271 	(SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))
272 
273 #define SCD_TX_STTS_QUEUE_OFFSET(x)\
274 	(SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))
275 
276 #define SCD_TRANS_TBL_OFFSET_QUEUE(x) \
277 	((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)
278 
279 #define SCD_BASE			(PRPH_BASE + 0xa02c00)
280 
281 #define SCD_SRAM_BASE_ADDR	(SCD_BASE + 0x0)
282 #define SCD_DRAM_BASE_ADDR	(SCD_BASE + 0x8)
283 #define SCD_AIT			(SCD_BASE + 0x0c)
284 #define SCD_TXFACT		(SCD_BASE + 0x10)
285 #define SCD_ACTIVE		(SCD_BASE + 0x14)
286 #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
287 #define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
288 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
289 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
290 #define SCD_GP_CTRL		(SCD_BASE + 0x1a8)
291 #define SCD_EN_CTRL		(SCD_BASE + 0x254)
292 
293 /*********************** END TX SCHEDULER *************************************/
294 
295 /* Oscillator clock */
296 #define OSC_CLK				(0xa04068)
297 #define OSC_CLK_FORCE_CONTROL		(0x8)
298 
299 #define FH_UCODE_LOAD_STATUS		(0x1AF0)
300 
301 /*
302  * Replacing FH_UCODE_LOAD_STATUS
303  * This register is writen by driver and is read by uCode during boot flow.
304  * Note this address is cleared after MAC reset.
305  */
306 #define UREG_UCODE_LOAD_STATUS		(0xa05c40)
307 #define UREG_CPU_INIT_RUN		(0xa05c44)
308 
309 #define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR	(0x1E78)
310 #define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR	(0x1E7C)
311 
312 #define LMPM_SECURE_CPU1_HDR_MEM_SPACE		(0x420000)
313 #define LMPM_SECURE_CPU2_HDR_MEM_SPACE		(0x420400)
314 
315 #define LMAC2_PRPH_OFFSET		(0x100000)
316 
317 /* Rx FIFO */
318 #define RXF_SIZE_ADDR			(0xa00c88)
319 #define RXF_RD_D_SPACE			(0xa00c40)
320 #define RXF_RD_WR_PTR			(0xa00c50)
321 #define RXF_RD_RD_PTR			(0xa00c54)
322 #define RXF_RD_FENCE_PTR		(0xa00c4c)
323 #define RXF_SET_FENCE_MODE		(0xa00c14)
324 #define RXF_LD_WR2FENCE		(0xa00c1c)
325 #define RXF_FIFO_RD_FENCE_INC		(0xa00c68)
326 #define RXF_SIZE_BYTE_CND_POS		(7)
327 #define RXF_SIZE_BYTE_CNT_MSK		(0x3ff << RXF_SIZE_BYTE_CND_POS)
328 #define RXF_DIFF_FROM_PREV		(0x200)
329 
330 #define RXF_LD_FENCE_OFFSET_ADDR	(0xa00c10)
331 #define RXF_FIFO_RD_FENCE_ADDR		(0xa00c0c)
332 
333 /* Tx FIFO */
334 #define TXF_FIFO_ITEM_CNT		(0xa00438)
335 #define TXF_WR_PTR			(0xa00414)
336 #define TXF_RD_PTR			(0xa00410)
337 #define TXF_FENCE_PTR			(0xa00418)
338 #define TXF_LOCK_FENCE			(0xa00424)
339 #define TXF_LARC_NUM			(0xa0043c)
340 #define TXF_READ_MODIFY_DATA		(0xa00448)
341 #define TXF_READ_MODIFY_ADDR		(0xa0044c)
342 
343 /* UMAC Internal Tx Fifo */
344 #define TXF_CPU2_FIFO_ITEM_CNT		(0xA00538)
345 #define TXF_CPU2_WR_PTR		(0xA00514)
346 #define TXF_CPU2_RD_PTR		(0xA00510)
347 #define TXF_CPU2_FENCE_PTR		(0xA00518)
348 #define TXF_CPU2_LOCK_FENCE		(0xA00524)
349 #define TXF_CPU2_NUM			(0xA0053C)
350 #define TXF_CPU2_READ_MODIFY_DATA	(0xA00548)
351 #define TXF_CPU2_READ_MODIFY_ADDR	(0xA0054C)
352 
353 /* Radio registers access */
354 #define RSP_RADIO_CMD			(0xa02804)
355 #define RSP_RADIO_RDDAT			(0xa02814)
356 #define RADIO_RSP_ADDR_POS		(6)
357 #define RADIO_RSP_RD_CMD		(3)
358 
359 /* FW monitor */
360 #define MON_BUFF_SAMPLE_CTL		(0xa03c00)
361 #define MON_BUFF_BASE_ADDR		(0xa03c1c)
362 #define MON_BUFF_END_ADDR		(0xa03c40)
363 #define MON_BUFF_WRPTR			(0xa03c44)
364 #define MON_BUFF_CYCLE_CNT		(0xa03c48)
365 /* FW monitor family 8000 and on */
366 #define MON_BUFF_BASE_ADDR_VER2		(0xa03c1c)
367 #define MON_BUFF_END_ADDR_VER2		(0xa03c20)
368 #define MON_BUFF_WRPTR_VER2		(0xa03c24)
369 #define MON_BUFF_CYCLE_CNT_VER2		(0xa03c28)
370 #define MON_BUFF_SHIFT_VER2		(0x8)
371 /* FW monitor familiy AX210 and on */
372 #define DBGC_CUR_DBGBUF_BASE_ADDR_LSB		(0xd03c20)
373 #define DBGC_CUR_DBGBUF_BASE_ADDR_MSB		(0xd03c24)
374 #define DBGC_CUR_DBGBUF_STATUS			(0xd03c1c)
375 #define DBGC_DBGBUF_WRAP_AROUND			(0xd03c2c)
376 #define DBGC_CUR_DBGBUF_STATUS_OFFSET_MSK	(0x00ffffff)
377 
378 #define MON_DMARB_RD_CTL_ADDR		(0xa03c60)
379 #define MON_DMARB_RD_DATA_ADDR		(0xa03c5c)
380 
381 #define DBGC_IN_SAMPLE			(0xa03c00)
382 #define DBGC_OUT_CTRL			(0xa03c0c)
383 
384 /* enable the ID buf for read */
385 #define WFPM_PS_CTL_CLR			0xA0300C
386 #define WFMP_MAC_ADDR_0			0xA03080
387 #define WFMP_MAC_ADDR_1			0xA03084
388 #define LMPM_PMG_EN			0xA01CEC
389 #define RADIO_REG_SYS_MANUAL_DFT_0	0xAD4078
390 #define RFIC_REG_RD			0xAD0470
391 #define WFPM_CTRL_REG			0xA03030
392 #define WFPM_GP2			0xA030B4
393 enum {
394 	ENABLE_WFPM = BIT(31),
395 	WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK	= 0x80000000,
396 };
397 
398 #define CNVI_AUX_MISC_CHIP				0xA200B0
399 #define CNVR_AUX_MISC_CHIP				0xA2B800
400 #define CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM		0xA29890
401 #define CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR	0xA29938
402 
403 enum {
404 	HW_STEP_LOCATION_BITS = 24,
405 };
406 
407 #define AUX_MISC_MASTER1_EN		0xA20818
408 enum aux_misc_master1_en {
409 	AUX_MISC_MASTER1_EN_SBE_MSK	= 0x1,
410 };
411 
412 #define AUX_MISC_MASTER1_SMPHR_STATUS	0xA20800
413 #define RSA_ENABLE			0xA24B08
414 #define PREG_AUX_BUS_WPROT_0		0xA04CC0
415 
416 /* device family 9000 WPROT register */
417 #define PREG_PRPH_WPROT_9000		0xA04CE0
418 /* device family 22000 WPROT register */
419 #define PREG_PRPH_WPROT_22000		0xA04D00
420 
421 #define SB_CPU_1_STATUS			0xA01E30
422 #define SB_CPU_2_STATUS			0xA01E34
423 #define UMAG_SB_CPU_1_STATUS		0xA038C0
424 #define UMAG_SB_CPU_2_STATUS		0xA038C4
425 #define UMAG_GEN_HW_STATUS		0xA038C8
426 
427 /* For UMAG_GEN_HW_STATUS reg check */
428 enum {
429 	UMAG_GEN_HW_IS_FPGA = BIT(1),
430 };
431 
432 /* FW chicken bits */
433 #define LMPM_CHICK			0xA01FF8
434 enum {
435 	LMPM_CHICK_EXTENDED_ADDR_SPACE = BIT(0),
436 };
437 
438 /* FW chicken bits */
439 #define LMPM_PAGE_PASS_NOTIF			0xA03824
440 enum {
441 	LMPM_PAGE_PASS_NOTIF_POS = BIT(20),
442 };
443 
444 #define UREG_CHICK		(0xA05C00)
445 #define UREG_CHICK_MSI_ENABLE	BIT(24)
446 #define UREG_CHICK_MSIX_ENABLE	BIT(25)
447 
448 #define HPM_DEBUG			0xA03440
449 #define PERSISTENCE_BIT			BIT(12)
450 #define PREG_WFPM_ACCESS		BIT(12)
451 
452 #define UREG_DOORBELL_TO_ISR6		0xA05C04
453 #define UREG_DOORBELL_TO_ISR6_NMI_BIT	BIT(0)
454 
455 #define FSEQ_ERROR_CODE			0xA340C8
456 #define FSEQ_TOP_INIT_VERSION		0xA34038
457 #define FSEQ_CNVIO_INIT_VERSION		0xA3403C
458 #define FSEQ_OTP_VERSION		0xA340FC
459 #define FSEQ_TOP_CONTENT_VERSION	0xA340F4
460 #define FSEQ_ALIVE_TOKEN		0xA340F0
461 #define FSEQ_CNVI_ID			0xA3408C
462 #define FSEQ_CNVR_ID			0xA34090
463 #endif				/* __iwl_prph_h__ */
464