1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * (c) Copyright 2002-2010, Ralink Technology, Inc.
4  * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
5  * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
6  * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
7  */
8 
9 #include "mt76x0.h"
10 #include "eeprom.h"
11 #include "mcu.h"
12 #include "initvals.h"
13 #include "initvals_init.h"
14 #include "../mt76x02_phy.h"
15 
16 static void
17 mt76x0_set_wlan_state(struct mt76x02_dev *dev, u32 val, bool enable)
18 {
19 	u32 mask = MT_CMB_CTRL_XTAL_RDY | MT_CMB_CTRL_PLL_LD;
20 
21 	/* Note: we don't turn off WLAN_CLK because that makes the device
22 	 *	 not respond properly on the probe path.
23 	 *	 In case anyone (PSM?) wants to use this function we can
24 	 *	 bring the clock stuff back and fixup the probe path.
25 	 */
26 
27 	if (enable)
28 		val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
29 			MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
30 	else
31 		val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN);
32 
33 	mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
34 	udelay(20);
35 
36 	/* Note: vendor driver tries to disable/enable wlan here and retry
37 	 *       but the code which does it is so buggy it must have never
38 	 *       triggered, so don't bother.
39 	 */
40 	if (enable && !mt76_poll(dev, MT_CMB_CTRL, mask, mask, 2000))
41 		dev_err(dev->mt76.dev, "PLL and XTAL check failed\n");
42 }
43 
44 void mt76x0_chip_onoff(struct mt76x02_dev *dev, bool enable, bool reset)
45 {
46 	u32 val;
47 
48 	val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
49 
50 	if (reset) {
51 		val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN;
52 		val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;
53 
54 		if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
55 			val |= (MT_WLAN_FUN_CTRL_WLAN_RESET |
56 				MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
57 			mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
58 			udelay(20);
59 
60 			val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET |
61 				 MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
62 		}
63 	}
64 
65 	mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
66 	udelay(20);
67 
68 	mt76x0_set_wlan_state(dev, val, enable);
69 }
70 EXPORT_SYMBOL_GPL(mt76x0_chip_onoff);
71 
72 static void mt76x0_reset_csr_bbp(struct mt76x02_dev *dev)
73 {
74 	mt76_wr(dev, MT_MAC_SYS_CTRL,
75 		MT_MAC_SYS_CTRL_RESET_CSR |
76 		MT_MAC_SYS_CTRL_RESET_BBP);
77 	msleep(200);
78 	mt76_clear(dev, MT_MAC_SYS_CTRL,
79 		   MT_MAC_SYS_CTRL_RESET_CSR |
80 		   MT_MAC_SYS_CTRL_RESET_BBP);
81 }
82 
83 #define RANDOM_WRITE(dev, tab)			\
84 	mt76_wr_rp(dev, MT_MCU_MEMMAP_WLAN,	\
85 		   tab, ARRAY_SIZE(tab))
86 
87 static int mt76x0_init_bbp(struct mt76x02_dev *dev)
88 {
89 	int ret, i;
90 
91 	ret = mt76x0_phy_wait_bbp_ready(dev);
92 	if (ret)
93 		return ret;
94 
95 	RANDOM_WRITE(dev, mt76x0_bbp_init_tab);
96 
97 	for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
98 		const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
99 		const struct mt76_reg_pair *pair = &item->reg_pair;
100 
101 		if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
102 			mt76_wr(dev, pair->reg, pair->value);
103 	}
104 
105 	RANDOM_WRITE(dev, mt76x0_dcoc_tab);
106 
107 	return 0;
108 }
109 
110 static void mt76x0_init_mac_registers(struct mt76x02_dev *dev)
111 {
112 	RANDOM_WRITE(dev, common_mac_reg_table);
113 
114 	/* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */
115 	RANDOM_WRITE(dev, mt76x0_mac_reg_table);
116 
117 	/* Release BBP and MAC reset MAC_SYS_CTRL[1:0] = 0x0 */
118 	mt76_clear(dev, MT_MAC_SYS_CTRL, 0x3);
119 
120 	/* Set 0x141C[15:12]=0xF */
121 	mt76_set(dev, MT_EXT_CCA_CFG, 0xf000);
122 
123 	mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN);
124 
125 	/*
126 	 * tx_ring 9 is for mgmt frame
127 	 * tx_ring 8 is for in-band command frame.
128 	 * WMM_RG0_TXQMA: this register setting is for FCE to
129 	 *		  define the rule of tx_ring 9
130 	 * WMM_RG1_TXQMA: this register setting is for FCE to
131 	 *		  define the rule of tx_ring 8
132 	 */
133 	mt76_rmw(dev, MT_WMM_CTRL, 0x3ff, 0x201);
134 }
135 
136 void mt76x0_mac_stop(struct mt76x02_dev *dev)
137 {
138 	int i = 200, ok = 0;
139 
140 	mt76_clear(dev, MT_TXOP_CTRL_CFG, MT_TXOP_ED_CCA_EN);
141 
142 	/* Page count on TxQ */
143 	while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) ||
144 		       (mt76_rr(dev, 0x0a30) & 0x000000ff) ||
145 		       (mt76_rr(dev, 0x0a34) & 0x00ff00ff)))
146 		msleep(10);
147 
148 	if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000))
149 		dev_warn(dev->mt76.dev, "Warning: MAC TX did not stop!\n");
150 
151 	mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX |
152 					 MT_MAC_SYS_CTRL_ENABLE_TX);
153 
154 	/* Page count on RxQ */
155 	for (i = 0; i < 200; i++) {
156 		if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) &&
157 		    !mt76_rr(dev, 0x0a30) &&
158 		    !mt76_rr(dev, 0x0a34)) {
159 			if (ok++ > 5)
160 				break;
161 			continue;
162 		}
163 		msleep(1);
164 	}
165 
166 	if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000))
167 		dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n");
168 }
169 EXPORT_SYMBOL_GPL(mt76x0_mac_stop);
170 
171 int mt76x0_init_hardware(struct mt76x02_dev *dev)
172 {
173 	int ret, i, k;
174 
175 	if (!mt76x02_wait_for_wpdma(&dev->mt76, 1000))
176 		return -EIO;
177 
178 	/* Wait for ASIC ready after FW load. */
179 	if (!mt76x02_wait_for_mac(&dev->mt76))
180 		return -ETIMEDOUT;
181 
182 	mt76x0_reset_csr_bbp(dev);
183 	ret = mt76x02_mcu_function_select(dev, Q_SELECT, 1);
184 	if (ret)
185 		return ret;
186 
187 	mt76x0_init_mac_registers(dev);
188 
189 	if (!mt76x02_wait_for_txrx_idle(&dev->mt76))
190 		return -EIO;
191 
192 	ret = mt76x0_init_bbp(dev);
193 	if (ret)
194 		return ret;
195 
196 	dev->mt76.rxfilter = mt76_rr(dev, MT_RX_FILTR_CFG);
197 
198 	for (i = 0; i < 16; i++)
199 		for (k = 0; k < 4; k++)
200 			mt76x02_mac_shared_key_setup(dev, i, k, NULL);
201 
202 	for (i = 0; i < 256; i++)
203 		mt76x02_mac_wcid_setup(dev, i, 0, NULL);
204 
205 	ret = mt76x0_eeprom_init(dev);
206 	if (ret)
207 		return ret;
208 
209 	mt76x0_phy_init(dev);
210 
211 	return 0;
212 }
213 EXPORT_SYMBOL_GPL(mt76x0_init_hardware);
214 
215 static void
216 mt76x0_init_txpower(struct mt76x02_dev *dev,
217 		    struct ieee80211_supported_band *sband)
218 {
219 	struct ieee80211_channel *chan;
220 	struct mt76_rate_power t;
221 	s8 tp;
222 	int i;
223 
224 	for (i = 0; i < sband->n_channels; i++) {
225 		chan = &sband->channels[i];
226 
227 		mt76x0_get_tx_power_per_rate(dev, chan, &t);
228 		mt76x0_get_power_info(dev, chan, &tp);
229 
230 		chan->orig_mpwr = (mt76x02_get_max_rate_power(&t) + tp) / 2;
231 		chan->max_power = min_t(int, chan->max_reg_power,
232 					chan->orig_mpwr);
233 	}
234 }
235 
236 int mt76x0_register_device(struct mt76x02_dev *dev)
237 {
238 	int ret;
239 
240 	ret = mt76x02_init_device(dev);
241 	if (ret)
242 		return ret;
243 
244 	mt76x02_config_mac_addr_list(dev);
245 
246 	ret = mt76_register_device(&dev->mt76, true, mt76x02_rates,
247 				   ARRAY_SIZE(mt76x02_rates));
248 	if (ret)
249 		return ret;
250 
251 	if (dev->mphy.cap.has_5ghz) {
252 		struct ieee80211_supported_band *sband;
253 
254 		sband = &dev->mphy.sband_5g.sband;
255 		sband->vht_cap.cap &= ~IEEE80211_VHT_CAP_RXLDPC;
256 		mt76x0_init_txpower(dev, sband);
257 	}
258 
259 	if (dev->mphy.cap.has_2ghz)
260 		mt76x0_init_txpower(dev, &dev->mphy.sband_2g.sband);
261 
262 	mt76x02_init_debugfs(dev);
263 
264 	return 0;
265 }
266 EXPORT_SYMBOL_GPL(mt76x0_register_device);
267