1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
4  */
5 
6 #include <linux/kernel.h>
7 #include <linux/module.h>
8 #include <linux/usb.h>
9 
10 #include "mt76x0.h"
11 #include "mcu.h"
12 #include "../mt76x02_usb.h"
13 
14 static struct usb_device_id mt76x0_device_table[] = {
15 	{ USB_DEVICE(0x148F, 0x7610) },	/* MT7610U */
16 	{ USB_DEVICE(0x13B1, 0x003E) },	/* Linksys AE6000 */
17 	{ USB_DEVICE(0x0E8D, 0x7610) },	/* Sabrent NTWLAC */
18 	{ USB_DEVICE(0x7392, 0xa711) },	/* Edimax 7711mac */
19 	{ USB_DEVICE(0x7392, 0xb711) },	/* Edimax / Elecom  */
20 	{ USB_DEVICE(0x148f, 0x761a) },	/* TP-Link TL-WDN5200 */
21 	{ USB_DEVICE(0x148f, 0x760a) },	/* TP-Link unknown */
22 	{ USB_DEVICE(0x0b05, 0x17d1) },	/* Asus USB-AC51 */
23 	{ USB_DEVICE(0x0b05, 0x17db) },	/* Asus USB-AC50 */
24 	{ USB_DEVICE(0x0df6, 0x0075) },	/* Sitecom WLA-3100 */
25 	{ USB_DEVICE(0x2019, 0xab31) },	/* Planex GW-450D */
26 	{ USB_DEVICE(0x2001, 0x3d02) },	/* D-LINK DWA-171 rev B1 */
27 	{ USB_DEVICE(0x0586, 0x3425) },	/* Zyxel NWD6505 */
28 	{ USB_DEVICE(0x07b8, 0x7610) },	/* AboCom AU7212 */
29 	{ USB_DEVICE(0x04bb, 0x0951) },	/* I-O DATA WN-AC433UK */
30 	{ USB_DEVICE(0x057c, 0x8502) },	/* AVM FRITZ!WLAN USB Stick AC 430 */
31 	{ USB_DEVICE(0x293c, 0x5702) },	/* Comcast Xfinity KXW02AAA  */
32 	{ USB_DEVICE(0x20f4, 0x806b) },	/* TRENDnet TEW-806UBH  */
33 	{ USB_DEVICE(0x7392, 0xc711) }, /* Devolo Wifi ac Stick */
34 	{ USB_DEVICE(0x0df6, 0x0079) }, /* Sitecom Europe B.V. ac  Stick */
35 	{ USB_DEVICE(0x2357, 0x0105),
36 	  .driver_info = 1,	     }, /* TP-LINK Archer T1U */
37 	{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7630, 0xff, 0x2, 0xff)}, /* MT7630U */
38 	{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7650, 0xff, 0x2, 0xff)}, /* MT7650U */
39 	{ 0, }
40 };
41 
42 static void mt76x0_init_usb_dma(struct mt76x02_dev *dev)
43 {
44 	u32 val;
45 
46 	val = mt76_rr(dev, MT_USB_DMA_CFG);
47 
48 	val |= MT_USB_DMA_CFG_RX_BULK_EN |
49 	       MT_USB_DMA_CFG_TX_BULK_EN;
50 
51 	/* disable AGGR_BULK_RX in order to receive one
52 	 * frame in each rx urb and avoid copies
53 	 */
54 	val &= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN;
55 	mt76_wr(dev, MT_USB_DMA_CFG, val);
56 
57 	val = mt76_rr(dev, MT_COM_REG0);
58 	if (val & 1)
59 		dev_dbg(dev->mt76.dev, "MCU not ready\n");
60 
61 	val = mt76_rr(dev, MT_USB_DMA_CFG);
62 
63 	val |= MT_USB_DMA_CFG_RX_DROP_OR_PAD;
64 	mt76_wr(dev, MT_USB_DMA_CFG, val);
65 	val &= ~MT_USB_DMA_CFG_RX_DROP_OR_PAD;
66 	mt76_wr(dev, MT_USB_DMA_CFG, val);
67 }
68 
69 static void mt76x0u_cleanup(struct mt76x02_dev *dev)
70 {
71 	clear_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
72 	mt76x0_chip_onoff(dev, false, false);
73 	mt76u_queues_deinit(&dev->mt76);
74 }
75 
76 static void mt76x0u_stop(struct ieee80211_hw *hw)
77 {
78 	struct mt76x02_dev *dev = hw->priv;
79 
80 	clear_bit(MT76_STATE_RUNNING, &dev->mt76.state);
81 	cancel_delayed_work_sync(&dev->cal_work);
82 	cancel_delayed_work_sync(&dev->mt76.mac_work);
83 	mt76u_stop_tx(&dev->mt76);
84 	mt76x02u_exit_beacon_config(dev);
85 
86 	if (test_bit(MT76_REMOVED, &dev->mt76.state))
87 		return;
88 
89 	if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
90 		dev_warn(dev->mt76.dev, "TX DMA did not stop\n");
91 
92 	mt76x0_mac_stop(dev);
93 
94 	if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
95 		dev_warn(dev->mt76.dev, "RX DMA did not stop\n");
96 }
97 
98 static int mt76x0u_start(struct ieee80211_hw *hw)
99 {
100 	struct mt76x02_dev *dev = hw->priv;
101 	int ret;
102 
103 	ret = mt76x0_mac_start(dev);
104 	if (ret)
105 		return ret;
106 
107 	mt76x0_phy_calibrate(dev, true);
108 	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mt76.mac_work,
109 				     MT_MAC_WORK_INTERVAL);
110 	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
111 				     MT_CALIBRATE_INTERVAL);
112 	set_bit(MT76_STATE_RUNNING, &dev->mt76.state);
113 	return 0;
114 }
115 
116 static const struct ieee80211_ops mt76x0u_ops = {
117 	.tx = mt76x02_tx,
118 	.start = mt76x0u_start,
119 	.stop = mt76x0u_stop,
120 	.add_interface = mt76x02_add_interface,
121 	.remove_interface = mt76x02_remove_interface,
122 	.config = mt76x0_config,
123 	.configure_filter = mt76x02_configure_filter,
124 	.bss_info_changed = mt76x02_bss_info_changed,
125 	.sta_state = mt76_sta_state,
126 	.set_key = mt76x02_set_key,
127 	.conf_tx = mt76x02_conf_tx,
128 	.sw_scan_start = mt76x02_sw_scan,
129 	.sw_scan_complete = mt76x02_sw_scan_complete,
130 	.ampdu_action = mt76x02_ampdu_action,
131 	.sta_rate_tbl_update = mt76x02_sta_rate_tbl_update,
132 	.set_rts_threshold = mt76x02_set_rts_threshold,
133 	.wake_tx_queue = mt76_wake_tx_queue,
134 	.get_txpower = mt76_get_txpower,
135 	.set_tim = mt76_set_tim,
136 	.release_buffered_frames = mt76_release_buffered_frames,
137 };
138 
139 static int mt76x0u_init_hardware(struct mt76x02_dev *dev)
140 {
141 	int err;
142 
143 	mt76x0_chip_onoff(dev, true, true);
144 
145 	if (!mt76x02_wait_for_mac(&dev->mt76))
146 		return -ETIMEDOUT;
147 
148 	err = mt76x0u_mcu_init(dev);
149 	if (err < 0)
150 		return err;
151 
152 	mt76x0_init_usb_dma(dev);
153 	err = mt76x0_init_hardware(dev);
154 	if (err < 0)
155 		return err;
156 
157 	mt76x02u_init_beacon_config(dev);
158 
159 	mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e);
160 	mt76_wr(dev, MT_TXOP_CTRL_CFG,
161 		FIELD_PREP(MT_TXOP_TRUN_EN, 0x3f) |
162 		FIELD_PREP(MT_TXOP_EXT_CCA_DLY, 0x58));
163 
164 	return 0;
165 }
166 
167 static int mt76x0u_register_device(struct mt76x02_dev *dev)
168 {
169 	struct ieee80211_hw *hw = dev->mt76.hw;
170 	int err;
171 
172 	err = mt76u_alloc_queues(&dev->mt76);
173 	if (err < 0)
174 		goto out_err;
175 
176 	err = mt76x0u_init_hardware(dev);
177 	if (err < 0)
178 		goto out_err;
179 
180 	err = mt76x0_register_device(dev);
181 	if (err < 0)
182 		goto out_err;
183 
184 	/* check hw sg support in order to enable AMSDU */
185 	if (dev->mt76.usb.sg_en)
186 		hw->max_tx_fragments = MT_SG_MAX_SIZE;
187 	else
188 		hw->max_tx_fragments = 1;
189 
190 	set_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
191 
192 	return 0;
193 
194 out_err:
195 	mt76x0u_cleanup(dev);
196 	return err;
197 }
198 
199 static int mt76x0u_probe(struct usb_interface *usb_intf,
200 			 const struct usb_device_id *id)
201 {
202 	static const struct mt76_driver_ops drv_ops = {
203 		.tx_prepare_skb = mt76x02u_tx_prepare_skb,
204 		.tx_complete_skb = mt76x02u_tx_complete_skb,
205 		.tx_status_data = mt76x02_tx_status_data,
206 		.rx_skb = mt76x02_queue_rx_skb,
207 		.sta_ps = mt76x02_sta_ps,
208 		.sta_add = mt76x02_sta_add,
209 		.sta_remove = mt76x02_sta_remove,
210 	};
211 	struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
212 	struct mt76x02_dev *dev;
213 	struct mt76_dev *mdev;
214 	u32 mac_rev;
215 	int ret;
216 
217 	mdev = mt76_alloc_device(&usb_dev->dev, sizeof(*dev), &mt76x0u_ops,
218 				 &drv_ops);
219 	if (!mdev)
220 		return -ENOMEM;
221 
222 	dev = container_of(mdev, struct mt76x02_dev, mt76);
223 	mutex_init(&dev->phy_mutex);
224 
225 	/* Quirk for Archer T1U */
226 	if (id->driver_info)
227 		dev->no_2ghz = true;
228 
229 	usb_dev = usb_get_dev(usb_dev);
230 	usb_reset_device(usb_dev);
231 
232 	usb_set_intfdata(usb_intf, dev);
233 
234 	mt76x02u_init_mcu(mdev);
235 	ret = mt76u_init(mdev, usb_intf);
236 	if (ret)
237 		goto err;
238 
239 	/* Disable the HW, otherwise MCU fail to initalize on hot reboot */
240 	mt76x0_chip_onoff(dev, false, false);
241 
242 	if (!mt76x02_wait_for_mac(mdev)) {
243 		ret = -ETIMEDOUT;
244 		goto err;
245 	}
246 
247 	mdev->rev = mt76_rr(dev, MT_ASIC_VERSION);
248 	mac_rev = mt76_rr(dev, MT_MAC_CSR0);
249 	dev_info(mdev->dev, "ASIC revision: %08x MAC revision: %08x\n",
250 		 mdev->rev, mac_rev);
251 	if (!is_mt76x0(dev)) {
252 		ret = -ENODEV;
253 		goto err;
254 	}
255 
256 	/* Note: vendor driver skips this check for MT76X0U */
257 	if (!(mt76_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL))
258 		dev_warn(mdev->dev, "Warning: eFUSE not present\n");
259 
260 	ret = mt76x0u_register_device(dev);
261 	if (ret < 0)
262 		goto err;
263 
264 	return 0;
265 
266 err:
267 	usb_set_intfdata(usb_intf, NULL);
268 	usb_put_dev(interface_to_usbdev(usb_intf));
269 
270 	ieee80211_free_hw(mdev->hw);
271 	return ret;
272 }
273 
274 static void mt76x0_disconnect(struct usb_interface *usb_intf)
275 {
276 	struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
277 	bool initalized = test_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
278 
279 	if (!initalized)
280 		return;
281 
282 	ieee80211_unregister_hw(dev->mt76.hw);
283 	mt76x0u_cleanup(dev);
284 
285 	usb_set_intfdata(usb_intf, NULL);
286 	usb_put_dev(interface_to_usbdev(usb_intf));
287 
288 	ieee80211_free_hw(dev->mt76.hw);
289 }
290 
291 static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
292 					 pm_message_t state)
293 {
294 	struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
295 
296 	mt76u_stop_rx(&dev->mt76);
297 	clear_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state);
298 	mt76x0_chip_onoff(dev, false, false);
299 
300 	return 0;
301 }
302 
303 static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
304 {
305 	struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
306 	int ret;
307 
308 	ret = mt76u_resume_rx(&dev->mt76);
309 	if (ret < 0)
310 		goto err;
311 
312 	ret = mt76x0u_init_hardware(dev);
313 	if (ret)
314 		goto err;
315 
316 	return 0;
317 err:
318 	mt76x0u_cleanup(dev);
319 	return ret;
320 }
321 
322 MODULE_DEVICE_TABLE(usb, mt76x0_device_table);
323 MODULE_FIRMWARE(MT7610E_FIRMWARE);
324 MODULE_FIRMWARE(MT7610U_FIRMWARE);
325 MODULE_LICENSE("GPL");
326 
327 static struct usb_driver mt76x0_driver = {
328 	.name		= KBUILD_MODNAME,
329 	.id_table	= mt76x0_device_table,
330 	.probe		= mt76x0u_probe,
331 	.disconnect	= mt76x0_disconnect,
332 	.suspend	= mt76x0_suspend,
333 	.resume		= mt76x0_resume,
334 	.reset_resume	= mt76x0_resume,
335 	.soft_unbind	= 1,
336 	.disable_hub_initiated_lpm = 1,
337 };
338 module_usb_driver(mt76x0_driver);
339