1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
4  * All rights reserved.
5  */
6 
7 #ifndef WILC_WLAN_IF_H
8 #define WILC_WLAN_IF_H
9 
10 #include <linux/netdevice.h>
11 #include "fw.h"
12 
13 /********************************************
14  *
15  *      Wlan Configuration ID
16  *
17  ********************************************/
18 
19 enum bss_types {
20 	WILC_FW_BSS_TYPE_INFRA = 0,
21 	WILC_FW_BSS_TYPE_INDEPENDENT,
22 	WILC_FW_BSS_TYPE_AP,
23 };
24 
25 enum {
26 	WILC_FW_OPER_MODE_B_ONLY = 0,	 /* 1, 2 M, otherwise 5, 11 M */
27 	WILC_FW_OPER_MODE_G_ONLY,	 /* 6,12,24 otherwise 9,18,36,48,54 */
28 	WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */
29 	WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */
30 };
31 
32 enum {
33 	WILC_FW_PREAMBLE_SHORT = 0,	/* Short Preamble */
34 	WILC_FW_PREAMBLE_LONG = 1,	/* Long Preamble */
35 	WILC_FW_PREAMBLE_AUTO = 2,	/* Auto Preamble Selection */
36 };
37 
38 enum {
39 	WILC_FW_PASSIVE_SCAN = 0,
40 	WILC_FW_ACTIVE_SCAN = 1,
41 };
42 
43 enum {
44 	WILC_FW_NO_POWERSAVE = 0,
45 	WILC_FW_MIN_FAST_PS = 1,
46 	WILC_FW_MAX_FAST_PS = 2,
47 	WILC_FW_MIN_PSPOLL_PS = 3,
48 	WILC_FW_MAX_PSPOLL_PS = 4
49 };
50 
51 enum bus_acquire {
52 	WILC_BUS_ACQUIRE_ONLY = 0,
53 	WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
54 };
55 
56 enum bus_release {
57 	WILC_BUS_RELEASE_ONLY = 0,
58 	WILC_BUS_RELEASE_ALLOW_SLEEP = 1,
59 };
60 
61 enum {
62 	WILC_FW_NO_ENCRYPT = 0,
63 	WILC_FW_ENCRYPT_ENABLED = BIT(0),
64 	WILC_FW_WEP = BIT(1),
65 	WILC_FW_WEP_EXTENDED = BIT(2),
66 	WILC_FW_WPA = BIT(3),
67 	WILC_FW_WPA2 = BIT(4),
68 	WILC_FW_AES = BIT(5),
69 	WILC_FW_TKIP = BIT(6)
70 };
71 
72 enum {
73 	WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT,
74 	WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED,
75 	WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP,
76 	WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED,
77 	WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA,
78 	WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA,
79 	WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED,
80 	WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2,
81 	WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2
82 };
83 
84 enum authtype {
85 	WILC_FW_AUTH_OPEN_SYSTEM = 1,
86 	WILC_FW_AUTH_SHARED_KEY = 2,
87 	WILC_FW_AUTH_ANY = 3,
88 	WILC_FW_AUTH_IEEE8021 = 5
89 };
90 
91 enum site_survey {
92 	WILC_FW_SITE_SURVEY_1CH = 0,
93 	WILC_FW_SITE_SURVEY_ALL_CH = 1,
94 	WILC_FW_SITE_SURVEY_OFF = 2
95 };
96 
97 enum {
98 	WILC_FW_ACK_POLICY_NORMAL = 0,
99 	WILC_FW_ACK_NO_POLICY,
100 };
101 
102 enum {
103 	WILC_FW_REKEY_POLICY_DISABLE = 1,
104 	WILC_FW_REKEY_POLICY_TIME_BASE,
105 	WILC_FW_REKEY_POLICY_PKT_BASE,
106 	WILC_FW_REKEY_POLICY_TIME_PKT_BASE
107 };
108 
109 enum {
110 	WILC_FW_FILTER_NO = 0x00,
111 	WILC_FW_FILTER_AP_ONLY = 0x01,
112 	WILC_FW_FILTER_STA_ONLY = 0x02
113 };
114 
115 enum {
116 	WILC_FW_11N_PROT_AUTO = 0,	/* Auto */
117 	WILC_FW_11N_NO_PROT,		/* Do not use any protection */
118 	WILC_FW_11N_PROT_ERP,		/* Protect all ERP frame exchanges */
119 	WILC_FW_11N_PROT_HT,		/* Protect all HT frame exchanges  */
120 	WILC_FW_11N_PROT_GF		/* Protect all GF frame exchanges  */
121 };
122 
123 enum {
124 	WILC_FW_ERP_PROT_SELF_CTS,
125 	WILC_FW_ERP_PROT_RTS_CTS,
126 };
127 
128 enum {
129 	WILC_FW_11N_OP_MODE_HT_MIXED = 1,
130 	WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ,
131 	WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ,
132 };
133 
134 enum {
135 	WILC_FW_OBBS_NONHT_NO_DETECT = 0,
136 	WILC_FW_OBBS_NONHT_DETECT_ONLY = 1,
137 	WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2,
138 	WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3,
139 };
140 
141 enum {
142 	WILC_FW_HT_PROT_RTS_CTS_NONHT = 0,  /* RTS-CTS at non-HT rate */
143 	WILC_FW_HT_PROT_FIRST_FRAME_NONHT,  /* First frame at non-HT rate */
144 	WILC_FW_HT_PROT_LSIG_TXOP,	    /* LSIG TXOP Protection */
145 	WILC_FW_HT_PROT_FIRST_FRAME_MIXED,  /* First frame at Mixed format */
146 };
147 
148 enum {
149 	WILC_FW_SMPS_MODE_STATIC = 1,
150 	WILC_FW_SMPS_MODE_DYNAMIC = 2,
151 	WILC_FW_SMPS_MODE_MIMO = 3,	/* power save disable */
152 };
153 
154 enum {
155 	WILC_FW_TX_RATE_AUTO = 0,
156 	WILC_FW_TX_RATE_MBPS_1 = 1,
157 	WILC_FW_TX_RATE_MBPS_2 = 2,
158 	WILC_FW_TX_RATE_MBPS_5_5 = 5,
159 	WILC_FW_TX_RATE_MBPS_11 = 11,
160 	WILC_FW_TX_RATE_MBPS_6 = 6,
161 	WILC_FW_TX_RATE_MBPS_9 = 9,
162 	WILC_FW_TX_RATE_MBPS_12 = 12,
163 	WILC_FW_TX_RATE_MBPS_18 = 18,
164 	WILC_FW_TX_RATE_MBPS_24 = 24,
165 	WILC_FW_TX_RATE_MBPS_36 = 36,
166 	WILC_FW_TX_RATE_MBPS_48 = 48,
167 	WILC_FW_TX_RATE_MBPS_54 = 54
168 };
169 
170 enum {
171 	WILC_FW_DEFAULT_SCAN = 0,
172 	WILC_FW_USER_SCAN = BIT(0),
173 	WILC_FW_OBSS_PERIODIC_SCAN = BIT(1),
174 	WILC_FW_OBSS_ONETIME_SCAN = BIT(2)
175 };
176 
177 enum {
178 	WILC_FW_ACTION_FRM_IDX = 0,
179 	WILC_FW_PROBE_REQ_IDX = 1
180 };
181 
182 enum wid_type {
183 	WID_CHAR		= 0,
184 	WID_SHORT		= 1,
185 	WID_INT			= 2,
186 	WID_STR			= 3,
187 	WID_BIN_DATA		= 4,
188 	WID_BIN			= 5,
189 };
190 
191 struct wid {
192 	u16 id;
193 	enum wid_type type;
194 	s32 size;
195 	s8 *val;
196 };
197 
198 enum {
199 	WID_NIL				= 0xffff,
200 
201 	/*
202 	 *  BSS Type
203 	 *  -----------------------------------------------------------
204 	 *  Configuration : Infrastructure   Independent   Access Point
205 	 *  Values to set :         0               1            2
206 	 *  -----------------------------------------------------------
207 	 */
208 	WID_BSS_TYPE			= 0x0000,
209 
210 	/*
211 	 *  Transmit Rate
212 	 *  -----------------------------------------------------------
213 	 *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
214 	 *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
215 	 *  -----------------------------------------------------------
216 	 */
217 	WID_CURRENT_TX_RATE		= 0x0001,
218 
219 	/*
220 	 *  Channel
221 	 *  -----------------------------------------------------------
222 	 *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
223 	 *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
224 	 *  -----------------------------------------------------------
225 	 */
226 	WID_CURRENT_CHANNEL		= 0x0002,
227 
228 	/*
229 	 *  Preamble
230 	 *  -----------------------------------------------------------
231 	 *  Configuration :    short    long      Auto
232 	 *  Values to set :       0       1         2
233 	 *  -----------------------------------------------------------
234 	 */
235 	WID_PREAMBLE			= 0x0003,
236 
237 	/*
238 	 * 11g operating mode (ignored if 11g not present)
239 	 *  -----------------------------------------------------------
240 	 *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
241 	 *  Values to set :          1               2               3
242 	 *  -----------------------------------------------------------
243 	 */
244 	WID_11G_OPERATING_MODE		= 0x0004,
245 
246 	/*
247 	 *  Mac status (response only)
248 	 *  -----------------------------------------------------------
249 	 *  Configuration :   disconnect  connect
250 	 *  Values to get :          0       1
251 	 *  -----------------------------------------------------------
252 	 */
253 	WID_STATUS			= 0x0005,
254 
255 	/*
256 	 *  Scan type
257 	 *  -----------------------------------------------------------
258 	 *  Configuration :   Passive Scanning   Active Scanning
259 	 *  Values to set :                  0                 1
260 	 *  -----------------------------------------------------------
261 	 */
262 	WID_SCAN_TYPE			= 0x0007,
263 
264 	/*
265 	 *  Key Id (WEP default key Id)
266 	 *  -----------------------------------------------------------
267 	 *  Configuration :   Any value between 0 to 3
268 	 *  Values to set :   Same value. Default is 0
269 	 *  -----------------------------------------------------------
270 	 */
271 	WID_KEY_ID			= 0x0009,
272 
273 	/*
274 	 *  QoS Enable
275 	 *  -----------------------------------------------------------
276 	 *  Configuration :   QoS Disable   WMM Enable
277 	 *  Values to set :   0             1
278 	 *  -----------------------------------------------------------
279 	 */
280 	WID_QOS_ENABLE			= 0x000A,
281 
282 	/*
283 	 *  Power Management
284 	 *  -----------------------------------------------------------
285 	 *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
286 	 *  Values to set : 0            1             2
287 	 *  -----------------------------------------------------------
288 	 */
289 	WID_POWER_MANAGEMENT		= 0x000B,
290 
291 	/*
292 	 *  WEP/802 11I Configuration
293 	 *  -----------------------------------------------------------
294 	 *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
295 	 *  Values (0x)  :   00     03   07     29       49       31      51
296 	 *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
297 	 *  Values (0x)  :      69        71
298 	 *  -----------------------------------------------------------
299 	 */
300 	WID_11I_MODE			= 0x000C,
301 
302 	/*
303 	 *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
304 	 *  -----------------------------------------------------------
305 	 *  Configuration : Open System Shared Key Any Type | 802.1x Auth
306 	 *  Values (0x)   :    01             02         03 |    BIT2
307 	 *  -----------------------------------------------------------
308 	 */
309 	WID_AUTH_TYPE			= 0x000D,
310 
311 	/*
312 	 *  Site Survey Type
313 	 *  -----------------------------------------------------------
314 	 *  Configuration       :  Values to set
315 	 *  Survey 1 Channel    :  0
316 	 *  survey all Channels :  1
317 	 *  Disable Site Survey :  2
318 	 *  -----------------------------------------------------------
319 	 */
320 	WID_SITE_SURVEY			= 0x000E,
321 
322 	/*
323 	 *  Listen Interval
324 	 *  -----------------------------------------------------------
325 	 *  Configuration :   Any value between 1 to 255
326 	 *  Values to set :   Same value. Default is 3
327 	 *  -----------------------------------------------------------
328 	 */
329 	WID_LISTEN_INTERVAL		= 0x000F,
330 
331 	/*
332 	 *  DTIM Period
333 	 *  -----------------------------------------------------------
334 	 *  Configuration :   Any value between 1 to 255
335 	 *  Values to set :   Same value. Default is 3
336 	 *  -----------------------------------------------------------
337 	 */
338 	WID_DTIM_PERIOD			= 0x0010,
339 
340 	/*
341 	 *  ACK Policy
342 	 *  -----------------------------------------------------------
343 	 *  Configuration :   Normal Ack            No Ack
344 	 *  Values to set :       0                   1
345 	 *  -----------------------------------------------------------
346 	 */
347 	WID_ACK_POLICY			= 0x0011,
348 
349 	/*
350 	 *  Reset MAC (Set only)
351 	 *  -----------------------------------------------------------
352 	 *  Configuration :   Don't Reset	Reset	No Request
353 	 *  Values to set :       0               1	    2
354 	 *  -----------------------------------------------------------
355 	 */
356 	WID_RESET			= 0x0012,
357 
358 	/*
359 	 *  Broadcast SSID Option: Setting this will adhere to "" SSID element
360 	 *  -----------------------------------------------------------
361 	 *  Configuration :   Enable             Disable
362 	 *  Values to set :   1                  0
363 	 *  -----------------------------------------------------------
364 	 */
365 	WID_BCAST_SSID			= 0x0015,
366 
367 	/*
368 	 *  Disconnect (Station)
369 	 *  -----------------------------------------------------------
370 	 *  Configuration :   Association ID
371 	 *  Values to set :   Association ID
372 	 *  -----------------------------------------------------------
373 	 */
374 	WID_DISCONNECT			= 0x0016,
375 
376 	/*
377 	 *  11a Tx Power Level
378 	 *  -----------------------------------------------------------
379 	 *  Configuration : Sets TX Power (Higher the value greater the power)
380 	 *  Values to set : Any value between 0 and 63 (inclusive Default 48)
381 	 *  -----------------------------------------------------------
382 	 */
383 	WID_TX_POWER_LEVEL_11A		= 0x0018,
384 
385 	/*
386 	 *  Group Key Update Policy Selection
387 	 *  -----------------------------------------------------------
388 	 *  Configuration : Disabled timeBased packetBased timePacketBased
389 	 *  Values to set :   1            2          3              4
390 	 *  -----------------------------------------------------------
391 	 */
392 	WID_REKEY_POLICY		= 0x0019,
393 
394 	/*
395 	 *  Allow Short Slot
396 	 *  -----------------------------------------------------------
397 	 *  Configuration : Disallow Short Slot      Allow Short Slot
398 	 *          (Enable Only Long Slot) (Enable Short Slot if applicable)
399 	 *  Values to set :    0         1
400 	 *  -----------------------------------------------------------
401 	 */
402 	WID_SHORT_SLOT_ALLOWED		= 0x001A,
403 
404 	WID_PHY_ACTIVE_REG		= 0x001B,
405 
406 	/*
407 	 *  11b Tx Power Level
408 	 *  -----------------------------------------------------------
409 	 *  Configuration : Sets TX Power (Higher the value greater the power)
410 	 *  Values to set : Any value between 0 and 63 (inclusive Default 48)
411 	 *  -----------------------------------------------------------
412 	 */
413 	WID_TX_POWER_LEVEL_11B		= 0x001D,
414 
415 	/*
416 	 *  Scan Request
417 	 *  -----------------------------------------------------------
418 	 *  Configuration : Request default scan
419 	 *  Values to set : 0
420 	 *  -----------------------------------------------------------
421 	 */
422 	WID_START_SCAN_REQ		= 0x001E,
423 
424 	/*
425 	 *  Rssi (get only)
426 	 *  -----------------------------------------------------------
427 	 *  Configuration :
428 	 *  Values to get : Rssi value
429 	 *  -----------------------------------------------------------
430 	 */
431 	WID_RSSI			= 0x001F,
432 
433 	/*
434 	 * Join Request
435 	 *  -----------------------------------------------------------
436 	 *  Configuration : Request to join
437 	 *  Values to set : index of scan result
438 	 *  -----------------------------------------------------------
439 	 */
440 	WID_JOIN_REQ			= 0x0020,
441 
442 	WID_LINKSPEED			= 0x0026,
443 
444 	/*
445 	 *  Enable User Control of TX Power
446 	 *  -----------------------------------------------------------
447 	 *  Configuration : Disable                  Enable
448 	 *  Values to set :    0                       1
449 	 *  -----------------------------------------------------------
450 	 */
451 	WID_USER_CONTROL_ON_TX_POWER	= 0x0027,
452 
453 	WID_MEMORY_ACCESS_8BIT		= 0x0029,
454 
455 	/*
456 	 *  Enable Auto RX Sensitivity feature
457 	 *  -----------------------------------------------------------
458 	 *  Configuration : Disable                  Enable
459 	 *  Values to set :    0                       1
460 	 *  -----------------------------------------------------------
461 	 */
462 	WID_AUTO_RX_SENSITIVITY		= 0x0032,
463 
464 	/*
465 	 *  Receive Buffer Based Ack
466 	 *  -----------------------------------------------------------
467 	 *  Configuration : Disable                  Enable
468 	 *  Values to set :    0                       1
469 	 *  -----------------------------------------------------------
470 	 */
471 	WID_DATAFLOW_CONTROL		= 0x0033,
472 
473 	/*
474 	 *  Scan Filter
475 	 *  -----------------------------------------------------------
476 	 *  Configuration : Class       No filter   AP only   Station Only
477 	 *  Values to set :                0           1           2
478 	 *  Configuration : Priority    High Rssi   Low Rssi     Detect
479 	 *  Values to set :                0          0x4         0x0
480 	 *  Configuration : Channel     filter off  filter on
481 	 *  Values to set :                0          0x10
482 	 *  -----------------------------------------------------------
483 	 */
484 	WID_SCAN_FILTER			= 0x0036,
485 
486 	/*
487 	 *  Link Loss Threshold (measure in the beacon period)
488 	 *  -----------------------------------------------------------
489 	 *  Configuration : Any value between 10 and 254(Set to 255 disable)
490 	 *  Values to set : Same value. Default is 10
491 	 *  -----------------------------------------------------------
492 	 */
493 	WID_LINK_LOSS_THRESHOLD		= 0x0037,
494 
495 	WID_ABORT_RUNNING_SCAN		= 0x003E,
496 
497 	/* NMAC Character WID list */
498 	WID_WPS_START			= 0x0043,
499 
500 	/*
501 	 *  Protection mode for MAC
502 	 *  -----------------------------------------------------------
503 	 *  Configuration :  Auto  No protection  ERP    HT    GF
504 	 *  Values to set :  0     1              2      3     4
505 	 *  -----------------------------------------------------------
506 	 */
507 	WID_11N_PROT_MECH		= 0x0080,
508 
509 	/*
510 	 *  ERP Protection type for MAC
511 	 *  -----------------------------------------------------------
512 	 *  Configuration :  Self-CTS   RTS-CTS
513 	 *  Values to set :  0          1
514 	 *  -----------------------------------------------------------
515 	 */
516 	WID_11N_ERP_PROT_TYPE		= 0x0081,
517 
518 	/*
519 	 *  HT Option Enable
520 	 *  -----------------------------------------------------------
521 	 *  Configuration :   HT Enable          HT Disable
522 	 *  Values to set :   1                  0
523 	 *  -----------------------------------------------------------
524 	 */
525 	WID_11N_ENABLE			= 0x0082,
526 
527 	/*
528 	 *  11n Operating mode (Note that 11g operating mode will also be
529 	 *  used in addition to this, if this is set to HT Mixed mode)
530 	 *  -----------------------------------------------------------
531 	 *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
532 	 *  Values to set :     1         2               3
533 	 *  -----------------------------------------------------------
534 	 */
535 	WID_11N_OPERATING_MODE		= 0x0083,
536 
537 	/*
538 	 *  11n OBSS non-HT STA Detection flag
539 	 *  -----------------------------------------------------------
540 	 *  Configuration :  Do not detect
541 	 *  Values to set :  0
542 	 *  Configuration :  Detect, do not protect or report
543 	 *  Values to set :  1
544 	 *  Configuration :  Detect, protect and do not report
545 	 *  Values to set :  2
546 	 *  Configuration :  Detect, protect and report to other BSS
547 	 *  Values to set :  3
548 	 *  -----------------------------------------------------------
549 	 */
550 	WID_11N_OBSS_NONHT_DETECTION	= 0x0084,
551 
552 	/*
553 	 *  11n HT Protection Type
554 	 *  -----------------------------------------------------------
555 	 *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
556 	 *  Values to set :  0         1
557 	 *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
558 	 *  Values to set :  2         3
559 	 *  -----------------------------------------------------------
560 	 */
561 	WID_11N_HT_PROT_TYPE		= 0x0085,
562 
563 	/*
564 	 *  11n RIFS Protection Enable Flag
565 	 *  -----------------------------------------------------------
566 	 *  Configuration :  Disable    Enable
567 	 *  Values to set :  0          1
568 	 *  -----------------------------------------------------------
569 	 */
570 	WID_11N_RIFS_PROT_ENABLE	= 0x0086,
571 
572 	/*
573 	 *  SMPS Mode
574 	 *  -----------------------------------------------------------
575 	 *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
576 	 *  Values to set :  1        2         3
577 	 *  -----------------------------------------------------------
578 	 */
579 	WID_11N_SMPS_MODE		= 0x0087,
580 
581 	/*
582 	 *  Current transmit MCS
583 	 *  -----------------------------------------------------------
584 	 *  Configuration :  MCS Index for data rate
585 	 *  Values to set :  0 to 7
586 	 *  -----------------------------------------------------------
587 	 */
588 	WID_11N_CURRENT_TX_MCS		= 0x0088,
589 
590 	WID_11N_PRINT_STATS		= 0x0089,
591 
592 	/*
593 	 *  11n Short GI Enable Flag
594 	 *  -----------------------------------------------------------
595 	 *  Configuration :  Disable    Enable
596 	 *  Values to set :  0          1
597 	 *  -----------------------------------------------------------
598 	 */
599 	WID_11N_SHORT_GI_ENABLE		= 0x008D,
600 
601 	/*
602 	 *  11n RIFS Enable Flag
603 	 *  -----------------------------------------------------------
604 	 *  Configuration :  Disable    Enable
605 	 *  Values to set :  0          1
606 	 *  -----------------------------------------------------------
607 	 */
608 	WID_RIFS_MODE			= 0x0094,
609 
610 	/*
611 	 *  TX Abort Feature
612 	 *  -----------------------------------------------------------
613 	 *  Configuration :  Disable Self CTS    Enable Self CTS
614 	 *  Values to set :             0                      1
615 	 *  Configuration :  Disable TX Abort    Enable TX Abort
616 	 *  Values to set :             2                      3
617 	 *  Configuration :  Enable HW TX Abort Enable SW TX Abort
618 	 *  Values to set :             4                      5
619 	 *  -----------------------------------------------------------
620 	 */
621 	WID_TX_ABORT_CONFIG		= 0x00A1,
622 
623 	WID_REG_TSSI_11B_VALUE		= 0x00A6,
624 	WID_REG_TSSI_11G_VALUE		= 0x00A7,
625 	WID_REG_TSSI_11N_VALUE		= 0x00A8,
626 	WID_TX_CALIBRATION		= 0x00A9,
627 	WID_DSCR_TSSI_11B_VALUE		= 0x00AA,
628 	WID_DSCR_TSSI_11G_VALUE		= 0x00AB,
629 	WID_DSCR_TSSI_11N_VALUE		= 0x00AC,
630 
631 	/*
632 	 *  Immediate Block-Ack Support
633 	 *  -----------------------------------------------------------
634 	 *  Configuration : Disable                  Enable
635 	 *  Values to set :    0                       1
636 	 *  -----------------------------------------------------------
637 	 */
638 	WID_11N_IMMEDIATE_BA_ENABLED	= 0x00AF,
639 
640 	/*
641 	 *  TXOP Disable Flag
642 	 *  -----------------------------------------------------------
643 	 *  Configuration : Disable                  Enable
644 	 *  Values to set :    1                        0
645 	 *  -----------------------------------------------------------
646 	 */
647 	WID_11N_TXOP_PROT_DISABLE	= 0x00B0,
648 
649 	WID_TX_POWER_LEVEL_11N		= 0x00B1,
650 
651 	/* Custom Character WID list */
652 	/* SCAN Complete notification WID*/
653 	WID_SCAN_COMPLETE		= 0x00C9,
654 
655 	WID_DEL_BEACON			= 0x00CA,
656 
657 	WID_LOG_TERMINAL_SWITCH		= 0x00CD,
658 	WID_TX_POWER			= 0x00CE,
659 	WID_WOWLAN_TRIGGER		= 0X00CF,
660 	/*  EMAC Short WID list */
661 	/*  RTS Threshold */
662 	/*
663 	 *  -----------------------------------------------------------
664 	 *  Configuration :   Any value between 256 to 2347
665 	 *  Values to set :   Same value. Default is 2347
666 	 *  -----------------------------------------------------------
667 	 */
668 	WID_RTS_THRESHOLD		= 0x1000,
669 
670 	/*
671 	 *  Fragmentation Threshold
672 	 *  -----------------------------------------------------------
673 	 *  Configuration :   Any value between 256 to 2346
674 	 *  Values to set :   Same value. Default is 2346
675 	 *  -----------------------------------------------------------
676 	 */
677 	WID_FRAG_THRESHOLD		= 0x1001,
678 
679 	WID_SHORT_RETRY_LIMIT		= 0x1002,
680 	WID_LONG_RETRY_LIMIT		= 0x1003,
681 	WID_BEACON_INTERVAL		= 0x1006,
682 	WID_MEMORY_ACCESS_16BIT		= 0x1008,
683 	WID_PASSIVE_SCAN_TIME           = 0x100D,
684 	WID_JOIN_START_TIMEOUT		= 0x100F,
685 	WID_ASOC_TIMEOUT		= 0x1011,
686 	WID_11I_PROTOCOL_TIMEOUT	= 0x1012,
687 	WID_EAPOL_RESPONSE_TIMEOUT	= 0x1013,
688 
689 	/* NMAC Short WID list */
690 	WID_11N_SIG_QUAL_VAL		= 0x1085,
691 	WID_CCA_THRESHOLD		= 0x1087,
692 
693 	/* Custom Short WID list */
694 
695 	/* EMAC Integer WID list */
696 	WID_FAILED_COUNT		= 0x2000,
697 	WID_RETRY_COUNT			= 0x2001,
698 	WID_MULTIPLE_RETRY_COUNT	= 0x2002,
699 	WID_FRAME_DUPLICATE_COUNT	= 0x2003,
700 	WID_ACK_FAILURE_COUNT		= 0x2004,
701 	WID_RECEIVED_FRAGMENT_COUNT	= 0x2005,
702 	WID_MCAST_RECEIVED_FRAME_COUNT	= 0x2006,
703 	WID_FCS_ERROR_COUNT		= 0x2007,
704 	WID_SUCCESS_FRAME_COUNT		= 0x2008,
705 	WID_HUT_TX_COUNT		= 0x200A,
706 	WID_TX_FRAGMENT_COUNT		= 0x200B,
707 	WID_TX_MULTICAST_FRAME_COUNT	= 0x200C,
708 	WID_RTS_SUCCESS_COUNT		= 0x200D,
709 	WID_RTS_FAILURE_COUNT		= 0x200E,
710 	WID_WEP_UNDECRYPTABLE_COUNT	= 0x200F,
711 	WID_REKEY_PERIOD		= 0x2010,
712 	WID_REKEY_PACKET_COUNT		= 0x2011,
713 	WID_1X_SERV_ADDR		= 0x2012,
714 	WID_STACK_IP_ADDR		= 0x2013,
715 	WID_STACK_NETMASK_ADDR		= 0x2014,
716 	WID_HW_RX_COUNT			= 0x2015,
717 	WID_MEMORY_ADDRESS		= 0x201E,
718 	WID_MEMORY_ACCESS_32BIT		= 0x201F,
719 
720 	/* NMAC Integer WID list */
721 	/* Custom Integer WID list */
722 	WID_GET_INACTIVE_TIME		= 0x2084,
723 	/* EMAC String WID list */
724 	WID_SSID			= 0x3000,
725 	WID_FIRMWARE_VERSION		= 0x3001,
726 	WID_OPERATIONAL_RATE_SET	= 0x3002,
727 	WID_BSSID			= 0x3003,
728 	WID_WEP_KEY_VALUE		= 0x3004,
729 	WID_11I_PSK			= 0x3008,
730 	WID_11E_P_ACTION_REQ		= 0x3009,
731 	WID_1X_KEY			= 0x300A,
732 	WID_HARDWARE_VERSION		= 0x300B,
733 	WID_MAC_ADDR			= 0x300C,
734 	WID_HUT_DEST_ADDR		= 0x300D,
735 	WID_PHY_VERSION			= 0x300F,
736 	WID_SUPP_USERNAME		= 0x3010,
737 	WID_SUPP_PASSWORD		= 0x3011,
738 	WID_SITE_SURVEY_RESULTS		= 0x3012,
739 	WID_RX_POWER_LEVEL		= 0x3013,
740 	WID_SET_STA_MAC_INACTIVE_TIME	= 0x3017,
741 	WID_ADD_WEP_KEY			= 0x3019,
742 	WID_REMOVE_WEP_KEY		= 0x301A,
743 	WID_ADD_PTK			= 0x301B,
744 	WID_ADD_RX_GTK			= 0x301C,
745 	WID_ADD_TX_GTK			= 0x301D,
746 	WID_REMOVE_KEY			= 0x301E,
747 	WID_ASSOC_REQ_INFO		= 0x301F,
748 	WID_ASSOC_RES_INFO		= 0x3020,
749 	WID_MANUFACTURER		= 0x3026, /* Added for CAPI tool */
750 	WID_MODEL_NAME			= 0x3027, /* Added for CAPI tool */
751 	WID_MODEL_NUM			= 0x3028, /* Added for CAPI tool */
752 	WID_DEVICE_NAME			= 0x3029, /* Added for CAPI tool */
753 
754 	/* NMAC String WID list */
755 	WID_SET_OPERATION_MODE		= 0x3079,
756 	WID_11N_P_ACTION_REQ		= 0x3080,
757 	WID_HUT_TEST_ID			= 0x3081,
758 	WID_PMKID_INFO			= 0x3082,
759 	WID_FIRMWARE_INFO		= 0x3083,
760 	WID_REGISTER_FRAME		= 0x3084,
761 	WID_DEL_ALL_STA			= 0x3085,
762 	WID_REMAIN_ON_CHAN		= 0x3996,
763 	WID_SSID_PROBE_REQ		= 0x3997,
764 	WID_JOIN_REQ_EXTENDED		= 0x3998,
765 
766 	WID_IP_ADDRESS			= 0x3999,
767 
768 	/* Custom String WID list */
769 
770 	/* EMAC Binary WID list */
771 	WID_UAPSD_CONFIG		= 0x4001,
772 	WID_UAPSD_STATUS		= 0x4002,
773 	WID_WMM_AP_AC_PARAMS		= 0x4003,
774 	WID_WMM_STA_AC_PARAMS		= 0x4004,
775 	WID_NETWORK_INFO		= 0x4005,
776 	WID_STA_JOIN_INFO		= 0x4006,
777 	WID_CONNECTED_STA_LIST		= 0x4007,
778 
779 	/* NMAC Binary WID list */
780 	WID_11N_AUTORATE_TABLE		= 0x4080,
781 
782 	WID_SCAN_CHANNEL_LIST		= 0x4084,
783 
784 	WID_INFO_ELEMENT_PROBE		= 0x4085,
785 	WID_INFO_ELEMENT_ASSOCIATE	= 0x4086,
786 	WID_ADD_STA			= 0X4087,
787 	WID_REMOVE_STA			= 0X4088,
788 	WID_EDIT_STA			= 0X4089,
789 	WID_ADD_BEACON			= 0x408a,
790 
791 	WID_SETUP_MULTICAST_FILTER	= 0x408b,
792 
793 	/* Miscellaneous WIDs */
794 	WID_ALL				= 0x7FFE,
795 	WID_MAX				= 0xFFFF
796 };
797 
798 #endif
799