1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> 4 <http://rt2x00.serialmonkey.com> 5 6 */ 7 8 /* 9 Module: rt2x00 10 Abstract: rt2x00 queue datastructures and routines 11 */ 12 13 #ifndef RT2X00QUEUE_H 14 #define RT2X00QUEUE_H 15 16 #include <linux/prefetch.h> 17 18 /** 19 * DOC: Entry frame size 20 * 21 * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes, 22 * for USB devices this restriction does not apply, but the value of 23 * 2432 makes sense since it is big enough to contain the maximum fragment 24 * size according to the ieee802.11 specs. 25 * The aggregation size depends on support from the driver, but should 26 * be something around 3840 bytes. 27 */ 28 #define DATA_FRAME_SIZE 2432 29 #define MGMT_FRAME_SIZE 256 30 #define AGGREGATION_SIZE 3840 31 32 /** 33 * enum data_queue_qid: Queue identification 34 * 35 * @QID_AC_VO: AC VO queue 36 * @QID_AC_VI: AC VI queue 37 * @QID_AC_BE: AC BE queue 38 * @QID_AC_BK: AC BK queue 39 * @QID_HCCA: HCCA queue 40 * @QID_MGMT: MGMT queue (prio queue) 41 * @QID_RX: RX queue 42 * @QID_OTHER: None of the above (don't use, only present for completeness) 43 * @QID_BEACON: Beacon queue (value unspecified, don't send it to device) 44 * @QID_ATIM: Atim queue (value unspecified, don't send it to device) 45 */ 46 enum data_queue_qid { 47 QID_AC_VO = 0, 48 QID_AC_VI = 1, 49 QID_AC_BE = 2, 50 QID_AC_BK = 3, 51 QID_HCCA = 4, 52 QID_MGMT = 13, 53 QID_RX = 14, 54 QID_OTHER = 15, 55 QID_BEACON, 56 QID_ATIM, 57 }; 58 59 /** 60 * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc 61 * 62 * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX 63 * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX 64 * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by 65 * mac80211 but was stripped for processing by the driver. 66 * @SKBDESC_NOT_MAC80211: Frame didn't originate from mac80211, 67 * don't try to pass it back. 68 * @SKBDESC_DESC_IN_SKB: The descriptor is at the start of the 69 * skb, instead of in the desc field. 70 */ 71 enum skb_frame_desc_flags { 72 SKBDESC_DMA_MAPPED_RX = 1 << 0, 73 SKBDESC_DMA_MAPPED_TX = 1 << 1, 74 SKBDESC_IV_STRIPPED = 1 << 2, 75 SKBDESC_NOT_MAC80211 = 1 << 3, 76 SKBDESC_DESC_IN_SKB = 1 << 4, 77 }; 78 79 /** 80 * struct skb_frame_desc: Descriptor information for the skb buffer 81 * 82 * This structure is placed over the driver_data array, this means that 83 * this structure should not exceed the size of that array (40 bytes). 84 * 85 * @flags: Frame flags, see &enum skb_frame_desc_flags. 86 * @desc_len: Length of the frame descriptor. 87 * @tx_rate_idx: the index of the TX rate, used for TX status reporting 88 * @tx_rate_flags: the TX rate flags, used for TX status reporting 89 * @desc: Pointer to descriptor part of the frame. 90 * Note that this pointer could point to something outside 91 * of the scope of the skb->data pointer. 92 * @iv: IV/EIV data used during encryption/decryption. 93 * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. 94 * @sta: The station where sk buffer was sent. 95 */ 96 struct skb_frame_desc { 97 u8 flags; 98 99 u8 desc_len; 100 u8 tx_rate_idx; 101 u8 tx_rate_flags; 102 103 void *desc; 104 105 __le32 iv[2]; 106 107 dma_addr_t skb_dma; 108 struct ieee80211_sta *sta; 109 }; 110 111 /** 112 * get_skb_frame_desc - Obtain the rt2x00 frame descriptor from a sk_buff. 113 * @skb: &struct sk_buff from where we obtain the &struct skb_frame_desc 114 */ 115 static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) 116 { 117 BUILD_BUG_ON(sizeof(struct skb_frame_desc) > 118 IEEE80211_TX_INFO_DRIVER_DATA_SIZE); 119 return (struct skb_frame_desc *)&IEEE80211_SKB_CB(skb)->driver_data; 120 } 121 122 /** 123 * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc 124 * 125 * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. 126 * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. 127 * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value. 128 * @RXDONE_MY_BSS: Does this frame originate from device's BSS. 129 * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data. 130 * @RXDONE_CRYPTO_ICV: Driver provided ICV data. 131 * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary. 132 */ 133 enum rxdone_entry_desc_flags { 134 RXDONE_SIGNAL_PLCP = BIT(0), 135 RXDONE_SIGNAL_BITRATE = BIT(1), 136 RXDONE_SIGNAL_MCS = BIT(2), 137 RXDONE_MY_BSS = BIT(3), 138 RXDONE_CRYPTO_IV = BIT(4), 139 RXDONE_CRYPTO_ICV = BIT(5), 140 RXDONE_L2PAD = BIT(6), 141 }; 142 143 /** 144 * RXDONE_SIGNAL_MASK - Define to mask off all &rxdone_entry_desc_flags flags 145 * except for the RXDONE_SIGNAL_* flags. This is useful to convert the dev_flags 146 * from &rxdone_entry_desc to a signal value type. 147 */ 148 #define RXDONE_SIGNAL_MASK \ 149 ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS ) 150 151 /** 152 * struct rxdone_entry_desc: RX Entry descriptor 153 * 154 * Summary of information that has been read from the RX frame descriptor. 155 * 156 * @timestamp: RX Timestamp 157 * @signal: Signal of the received frame. 158 * @rssi: RSSI of the received frame. 159 * @size: Data size of the received frame. 160 * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). 161 * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). 162 * @rate_mode: Rate mode (See @enum rate_modulation). 163 * @cipher: Cipher type used during decryption. 164 * @cipher_status: Decryption status. 165 * @iv: IV/EIV data used during decryption. 166 * @icv: ICV data used during decryption. 167 */ 168 struct rxdone_entry_desc { 169 u64 timestamp; 170 int signal; 171 int rssi; 172 int size; 173 int flags; 174 int dev_flags; 175 u16 rate_mode; 176 u16 enc_flags; 177 enum mac80211_rx_encoding encoding; 178 enum rate_info_bw bw; 179 u8 cipher; 180 u8 cipher_status; 181 182 __le32 iv[2]; 183 __le32 icv; 184 }; 185 186 /** 187 * enum txdone_entry_desc_flags: Flags for &struct txdone_entry_desc 188 * 189 * Every txdone report has to contain the basic result of the 190 * transmission, either &TXDONE_UNKNOWN, &TXDONE_SUCCESS or 191 * &TXDONE_FAILURE. The flag &TXDONE_FALLBACK can be used in 192 * conjunction with all of these flags but should only be set 193 * if retires > 0. The flag &TXDONE_EXCESSIVE_RETRY can only be used 194 * in conjunction with &TXDONE_FAILURE. 195 * 196 * @TXDONE_UNKNOWN: Hardware could not determine success of transmission. 197 * @TXDONE_SUCCESS: Frame was successfully send 198 * @TXDONE_FALLBACK: Hardware used fallback rates for retries 199 * @TXDONE_FAILURE: Frame was not successfully send 200 * @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the 201 * frame transmission failed due to excessive retries. 202 */ 203 enum txdone_entry_desc_flags { 204 TXDONE_UNKNOWN, 205 TXDONE_SUCCESS, 206 TXDONE_FALLBACK, 207 TXDONE_FAILURE, 208 TXDONE_EXCESSIVE_RETRY, 209 TXDONE_AMPDU, 210 TXDONE_NO_ACK_REQ, 211 }; 212 213 /** 214 * struct txdone_entry_desc: TX done entry descriptor 215 * 216 * Summary of information that has been read from the TX frame descriptor 217 * after the device is done with transmission. 218 * 219 * @flags: TX done flags (See &enum txdone_entry_desc_flags). 220 * @retry: Retry count. 221 */ 222 struct txdone_entry_desc { 223 unsigned long flags; 224 int retry; 225 }; 226 227 /** 228 * enum txentry_desc_flags: Status flags for TX entry descriptor 229 * 230 * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. 231 * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. 232 * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. 233 * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. 234 * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. 235 * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. 236 * @ENTRY_TXD_BURST: This frame belongs to the same burst event. 237 * @ENTRY_TXD_ACK: An ACK is required for this frame. 238 * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used. 239 * @ENTRY_TXD_ENCRYPT: This frame should be encrypted. 240 * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). 241 * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. 242 * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. 243 * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU. 244 * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth. 245 * @ENTRY_TXD_HT_SHORT_GI: Use short GI. 246 * @ENTRY_TXD_HT_MIMO_PS: The receiving STA is in dynamic SM PS mode. 247 */ 248 enum txentry_desc_flags { 249 ENTRY_TXD_RTS_FRAME, 250 ENTRY_TXD_CTS_FRAME, 251 ENTRY_TXD_GENERATE_SEQ, 252 ENTRY_TXD_FIRST_FRAGMENT, 253 ENTRY_TXD_MORE_FRAG, 254 ENTRY_TXD_REQ_TIMESTAMP, 255 ENTRY_TXD_BURST, 256 ENTRY_TXD_ACK, 257 ENTRY_TXD_RETRY_MODE, 258 ENTRY_TXD_ENCRYPT, 259 ENTRY_TXD_ENCRYPT_PAIRWISE, 260 ENTRY_TXD_ENCRYPT_IV, 261 ENTRY_TXD_ENCRYPT_MMIC, 262 ENTRY_TXD_HT_AMPDU, 263 ENTRY_TXD_HT_BW_40, 264 ENTRY_TXD_HT_SHORT_GI, 265 ENTRY_TXD_HT_MIMO_PS, 266 }; 267 268 /** 269 * struct txentry_desc: TX Entry descriptor 270 * 271 * Summary of information for the frame descriptor before sending a TX frame. 272 * 273 * @flags: Descriptor flags (See &enum queue_entry_flags). 274 * @length: Length of the entire frame. 275 * @header_length: Length of 802.11 header. 276 * @length_high: PLCP length high word. 277 * @length_low: PLCP length low word. 278 * @signal: PLCP signal. 279 * @service: PLCP service. 280 * @msc: MCS. 281 * @stbc: Use Space Time Block Coding (only available for MCS rates < 8). 282 * @ba_size: Size of the recepients RX reorder buffer - 1. 283 * @rate_mode: Rate mode (See @enum rate_modulation). 284 * @mpdu_density: MDPU density. 285 * @retry_limit: Max number of retries. 286 * @ifs: IFS value. 287 * @txop: IFS value for 11n capable chips. 288 * @cipher: Cipher type used for encryption. 289 * @key_idx: Key index used for encryption. 290 * @iv_offset: Position where IV should be inserted by hardware. 291 * @iv_len: Length of IV data. 292 */ 293 struct txentry_desc { 294 unsigned long flags; 295 296 u16 length; 297 u16 header_length; 298 299 union { 300 struct { 301 u16 length_high; 302 u16 length_low; 303 u16 signal; 304 u16 service; 305 enum ifs ifs; 306 } plcp; 307 308 struct { 309 u16 mcs; 310 u8 stbc; 311 u8 ba_size; 312 u8 mpdu_density; 313 enum txop txop; 314 int wcid; 315 } ht; 316 } u; 317 318 enum rate_modulation rate_mode; 319 320 short retry_limit; 321 322 enum cipher cipher; 323 u16 key_idx; 324 u16 iv_offset; 325 u16 iv_len; 326 }; 327 328 /** 329 * enum queue_entry_flags: Status flags for queue entry 330 * 331 * @ENTRY_BCN_ASSIGNED: This entry has been assigned to an interface. 332 * As long as this bit is set, this entry may only be touched 333 * through the interface structure. 334 * @ENTRY_OWNER_DEVICE_DATA: This entry is owned by the device for data 335 * transfer (either TX or RX depending on the queue). The entry should 336 * only be touched after the device has signaled it is done with it. 337 * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting 338 * for the signal to start sending. 339 * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred 340 * while transferring the data to the hardware. No TX status report will 341 * be expected from the hardware. 342 * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and 343 * returned. It is now waiting for the status reporting before the 344 * entry can be reused again. 345 */ 346 enum queue_entry_flags { 347 ENTRY_BCN_ASSIGNED, 348 ENTRY_BCN_ENABLED, 349 ENTRY_OWNER_DEVICE_DATA, 350 ENTRY_DATA_PENDING, 351 ENTRY_DATA_IO_FAILED, 352 ENTRY_DATA_STATUS_PENDING, 353 }; 354 355 /** 356 * struct queue_entry: Entry inside the &struct data_queue 357 * 358 * @flags: Entry flags, see &enum queue_entry_flags. 359 * @last_action: Timestamp of last change. 360 * @queue: The data queue (&struct data_queue) to which this entry belongs. 361 * @skb: The buffer which is currently being transmitted (for TX queue), 362 * or used to directly receive data in (for RX queue). 363 * @entry_idx: The entry index number. 364 * @priv_data: Private data belonging to this queue entry. The pointer 365 * points to data specific to a particular driver and queue type. 366 * @status: Device specific status 367 */ 368 struct queue_entry { 369 unsigned long flags; 370 unsigned long last_action; 371 372 struct data_queue *queue; 373 374 struct sk_buff *skb; 375 376 unsigned int entry_idx; 377 378 void *priv_data; 379 }; 380 381 /** 382 * enum queue_index: Queue index type 383 * 384 * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is 385 * owned by the hardware then the queue is considered to be full. 386 * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been 387 * transferred to the hardware. 388 * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by 389 * the hardware and for which we need to run the txdone handler. If this 390 * entry is not owned by the hardware the queue is considered to be empty. 391 * @Q_INDEX_MAX: Keep last, used in &struct data_queue to determine the size 392 * of the index array. 393 */ 394 enum queue_index { 395 Q_INDEX, 396 Q_INDEX_DMA_DONE, 397 Q_INDEX_DONE, 398 Q_INDEX_MAX, 399 }; 400 401 /** 402 * enum data_queue_flags: Status flags for data queues 403 * 404 * @QUEUE_STARTED: The queue has been started. Fox RX queues this means the 405 * device might be DMA'ing skbuffers. TX queues will accept skbuffers to 406 * be transmitted and beacon queues will start beaconing the configured 407 * beacons. 408 * @QUEUE_PAUSED: The queue has been started but is currently paused. 409 * When this bit is set, the queue has been stopped in mac80211, 410 * preventing new frames to be enqueued. However, a few frames 411 * might still appear shortly after the pausing... 412 */ 413 enum data_queue_flags { 414 QUEUE_STARTED, 415 QUEUE_PAUSED, 416 }; 417 418 /** 419 * struct data_queue: Data queue 420 * 421 * @rt2x00dev: Pointer to main &struct rt2x00dev where this queue belongs to. 422 * @entries: Base address of the &struct queue_entry which are 423 * part of this queue. 424 * @qid: The queue identification, see &enum data_queue_qid. 425 * @flags: Entry flags, see &enum queue_entry_flags. 426 * @status_lock: The mutex for protecting the start/stop/flush 427 * handling on this queue. 428 * @tx_lock: Spinlock to serialize tx operations on this queue. 429 * @index_lock: Spinlock to protect index handling. Whenever @index, @index_done or 430 * @index_crypt needs to be changed this lock should be grabbed to prevent 431 * index corruption due to concurrency. 432 * @count: Number of frames handled in the queue. 433 * @limit: Maximum number of entries in the queue. 434 * @threshold: Minimum number of free entries before queue is kicked by force. 435 * @length: Number of frames in queue. 436 * @index: Index pointers to entry positions in the queue, 437 * use &enum queue_index to get a specific index field. 438 * @txop: maximum burst time. 439 * @aifs: The aifs value for outgoing frames (field ignored in RX queue). 440 * @cw_min: The cw min value for outgoing frames (field ignored in RX queue). 441 * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). 442 * @data_size: Maximum data size for the frames in this queue. 443 * @desc_size: Hardware descriptor size for the data in this queue. 444 * @priv_size: Size of per-queue_entry private data. 445 * @usb_endpoint: Device endpoint used for communication (USB only) 446 * @usb_maxpacket: Max packet size for given endpoint (USB only) 447 */ 448 struct data_queue { 449 struct rt2x00_dev *rt2x00dev; 450 struct queue_entry *entries; 451 452 enum data_queue_qid qid; 453 unsigned long flags; 454 455 struct mutex status_lock; 456 spinlock_t tx_lock; 457 spinlock_t index_lock; 458 459 unsigned int count; 460 unsigned short limit; 461 unsigned short threshold; 462 unsigned short length; 463 unsigned short index[Q_INDEX_MAX]; 464 465 unsigned short txop; 466 unsigned short aifs; 467 unsigned short cw_min; 468 unsigned short cw_max; 469 470 unsigned short data_size; 471 unsigned char desc_size; 472 unsigned char winfo_size; 473 unsigned short priv_size; 474 475 unsigned short usb_endpoint; 476 unsigned short usb_maxpacket; 477 }; 478 479 /** 480 * queue_end - Return pointer to the last queue (HELPER MACRO). 481 * @__dev: Pointer to &struct rt2x00_dev 482 * 483 * Using the base rx pointer and the maximum number of available queues, 484 * this macro will return the address of 1 position beyond the end of the 485 * queues array. 486 */ 487 #define queue_end(__dev) \ 488 &(__dev)->rx[(__dev)->data_queues] 489 490 /** 491 * tx_queue_end - Return pointer to the last TX queue (HELPER MACRO). 492 * @__dev: Pointer to &struct rt2x00_dev 493 * 494 * Using the base tx pointer and the maximum number of available TX 495 * queues, this macro will return the address of 1 position beyond 496 * the end of the TX queue array. 497 */ 498 #define tx_queue_end(__dev) \ 499 &(__dev)->tx[(__dev)->ops->tx_queues] 500 501 /** 502 * queue_next - Return pointer to next queue in list (HELPER MACRO). 503 * @__queue: Current queue for which we need the next queue 504 * 505 * Using the current queue address we take the address directly 506 * after the queue to take the next queue. Note that this macro 507 * should be used carefully since it does not protect against 508 * moving past the end of the list. (See macros &queue_end and 509 * &tx_queue_end for determining the end of the queue). 510 */ 511 #define queue_next(__queue) \ 512 &(__queue)[1] 513 514 /** 515 * queue_loop - Loop through the queues within a specific range (HELPER MACRO). 516 * @__entry: Pointer where the current queue entry will be stored in. 517 * @__start: Start queue pointer. 518 * @__end: End queue pointer. 519 * 520 * This macro will loop through all queues between &__start and &__end. 521 */ 522 #define queue_loop(__entry, __start, __end) \ 523 for ((__entry) = (__start); \ 524 prefetch(queue_next(__entry)), (__entry) != (__end);\ 525 (__entry) = queue_next(__entry)) 526 527 /** 528 * queue_for_each - Loop through all queues 529 * @__dev: Pointer to &struct rt2x00_dev 530 * @__entry: Pointer where the current queue entry will be stored in. 531 * 532 * This macro will loop through all available queues. 533 */ 534 #define queue_for_each(__dev, __entry) \ 535 queue_loop(__entry, (__dev)->rx, queue_end(__dev)) 536 537 /** 538 * tx_queue_for_each - Loop through the TX queues 539 * @__dev: Pointer to &struct rt2x00_dev 540 * @__entry: Pointer where the current queue entry will be stored in. 541 * 542 * This macro will loop through all TX related queues excluding 543 * the Beacon and Atim queues. 544 */ 545 #define tx_queue_for_each(__dev, __entry) \ 546 queue_loop(__entry, (__dev)->tx, tx_queue_end(__dev)) 547 548 /** 549 * txall_queue_for_each - Loop through all TX related queues 550 * @__dev: Pointer to &struct rt2x00_dev 551 * @__entry: Pointer where the current queue entry will be stored in. 552 * 553 * This macro will loop through all TX related queues including 554 * the Beacon and Atim queues. 555 */ 556 #define txall_queue_for_each(__dev, __entry) \ 557 queue_loop(__entry, (__dev)->tx, queue_end(__dev)) 558 559 /** 560 * rt2x00queue_for_each_entry - Loop through all entries in the queue 561 * @queue: Pointer to @data_queue 562 * @start: &enum queue_index Pointer to start index 563 * @end: &enum queue_index Pointer to end index 564 * @data: Data to pass to the callback function 565 * @fn: The function to call for each &struct queue_entry 566 * 567 * This will walk through all entries in the queue, in chronological 568 * order. This means it will start at the current @start pointer 569 * and will walk through the queue until it reaches the @end pointer. 570 * 571 * If fn returns true for an entry rt2x00queue_for_each_entry will stop 572 * processing and return true as well. 573 */ 574 bool rt2x00queue_for_each_entry(struct data_queue *queue, 575 enum queue_index start, 576 enum queue_index end, 577 void *data, 578 bool (*fn)(struct queue_entry *entry, 579 void *data)); 580 581 /** 582 * rt2x00queue_empty - Check if the queue is empty. 583 * @queue: Queue to check if empty. 584 */ 585 static inline int rt2x00queue_empty(struct data_queue *queue) 586 { 587 return queue->length == 0; 588 } 589 590 /** 591 * rt2x00queue_full - Check if the queue is full. 592 * @queue: Queue to check if full. 593 */ 594 static inline int rt2x00queue_full(struct data_queue *queue) 595 { 596 return queue->length == queue->limit; 597 } 598 599 /** 600 * rt2x00queue_free - Check the number of available entries in queue. 601 * @queue: Queue to check. 602 */ 603 static inline int rt2x00queue_available(struct data_queue *queue) 604 { 605 return queue->limit - queue->length; 606 } 607 608 /** 609 * rt2x00queue_threshold - Check if the queue is below threshold 610 * @queue: Queue to check. 611 */ 612 static inline int rt2x00queue_threshold(struct data_queue *queue) 613 { 614 return rt2x00queue_available(queue) < queue->threshold; 615 } 616 /** 617 * rt2x00queue_dma_timeout - Check if a timeout occurred for DMA transfers 618 * @entry: Queue entry to check. 619 */ 620 static inline int rt2x00queue_dma_timeout(struct queue_entry *entry) 621 { 622 if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) 623 return false; 624 return time_after(jiffies, entry->last_action + msecs_to_jiffies(100)); 625 } 626 627 /** 628 * _rt2x00_desc_read - Read a word from the hardware descriptor. 629 * @desc: Base descriptor address 630 * @word: Word index from where the descriptor should be read. 631 */ 632 static inline __le32 _rt2x00_desc_read(__le32 *desc, const u8 word) 633 { 634 return desc[word]; 635 } 636 637 /** 638 * rt2x00_desc_read - Read a word from the hardware descriptor, this 639 * function will take care of the byte ordering. 640 * @desc: Base descriptor address 641 * @word: Word index from where the descriptor should be read. 642 */ 643 static inline u32 rt2x00_desc_read(__le32 *desc, const u8 word) 644 { 645 return le32_to_cpu(_rt2x00_desc_read(desc, word)); 646 } 647 648 /** 649 * rt2x00_desc_write - write a word to the hardware descriptor, this 650 * function will take care of the byte ordering. 651 * @desc: Base descriptor address 652 * @word: Word index from where the descriptor should be written. 653 * @value: Value that should be written into the descriptor. 654 */ 655 static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value) 656 { 657 desc[word] = value; 658 } 659 660 /** 661 * rt2x00_desc_write - write a word to the hardware descriptor. 662 * @desc: Base descriptor address 663 * @word: Word index from where the descriptor should be written. 664 * @value: Value that should be written into the descriptor. 665 */ 666 static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) 667 { 668 _rt2x00_desc_write(desc, word, cpu_to_le32(value)); 669 } 670 671 #endif /* RT2X00QUEUE_H */ 672