1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Meson G12A USB2 PHY driver
4  *
5  * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
6  * Copyright (C) 2017 Amlogic, Inc. All rights reserved
7  * Copyright (C) 2019 BayLibre, SAS
8  * Author: Neil Armstrong <narmstrong@baylibre.com>
9  */
10 
11 #include <linux/bitfield.h>
12 #include <linux/bitops.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/io.h>
16 #include <linux/module.h>
17 #include <linux/of.h>
18 #include <linux/regmap.h>
19 #include <linux/reset.h>
20 #include <linux/phy/phy.h>
21 #include <linux/platform_device.h>
22 
23 #define PHY_CTRL_R0						0x0
24 #define PHY_CTRL_R1						0x4
25 #define PHY_CTRL_R2						0x8
26 #define PHY_CTRL_R3						0xc
27 	#define PHY_CTRL_R3_SQUELCH_REF				GENMASK(1, 0)
28 	#define PHY_CTRL_R3_HSDIC_REF				GENMASK(3, 2)
29 	#define PHY_CTRL_R3_DISC_THRESH				GENMASK(7, 4)
30 
31 #define PHY_CTRL_R4						0x10
32 	#define PHY_CTRL_R4_CALIB_CODE_7_0			GENMASK(7, 0)
33 	#define PHY_CTRL_R4_CALIB_CODE_15_8			GENMASK(15, 8)
34 	#define PHY_CTRL_R4_CALIB_CODE_23_16			GENMASK(23, 16)
35 	#define PHY_CTRL_R4_I_C2L_CAL_EN			BIT(24)
36 	#define PHY_CTRL_R4_I_C2L_CAL_RESET_N			BIT(25)
37 	#define PHY_CTRL_R4_I_C2L_CAL_DONE			BIT(26)
38 	#define PHY_CTRL_R4_TEST_BYPASS_MODE_EN			BIT(27)
39 	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0			GENMASK(29, 28)
40 	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2			GENMASK(31, 30)
41 
42 #define PHY_CTRL_R5						0x14
43 #define PHY_CTRL_R6						0x18
44 #define PHY_CTRL_R7						0x1c
45 #define PHY_CTRL_R8						0x20
46 #define PHY_CTRL_R9						0x24
47 #define PHY_CTRL_R10						0x28
48 #define PHY_CTRL_R11						0x2c
49 #define PHY_CTRL_R12						0x30
50 #define PHY_CTRL_R13						0x34
51 	#define PHY_CTRL_R13_CUSTOM_PATTERN_19			GENMASK(7, 0)
52 	#define PHY_CTRL_R13_LOAD_STAT				BIT(14)
53 	#define PHY_CTRL_R13_UPDATE_PMA_SIGNALS			BIT(15)
54 	#define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET		GENMASK(20, 16)
55 	#define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT		BIT(21)
56 	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL		BIT(22)
57 	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN		BIT(23)
58 	#define PHY_CTRL_R13_I_C2L_HS_EN			BIT(24)
59 	#define PHY_CTRL_R13_I_C2L_FS_EN			BIT(25)
60 	#define PHY_CTRL_R13_I_C2L_LS_EN			BIT(26)
61 	#define PHY_CTRL_R13_I_C2L_HS_OE			BIT(27)
62 	#define PHY_CTRL_R13_I_C2L_FS_OE			BIT(28)
63 	#define PHY_CTRL_R13_I_C2L_HS_RX_EN			BIT(29)
64 	#define PHY_CTRL_R13_I_C2L_FSLS_RX_EN			BIT(30)
65 
66 #define PHY_CTRL_R14						0x38
67 	#define PHY_CTRL_R14_I_RDP_EN				BIT(0)
68 	#define PHY_CTRL_R14_I_RPU_SW1_EN			BIT(1)
69 	#define PHY_CTRL_R14_I_RPU_SW2_EN			GENMASK(3, 2)
70 	#define PHY_CTRL_R14_PG_RSTN				BIT(4)
71 	#define PHY_CTRL_R14_I_C2L_DATA_16_8			BIT(5)
72 	#define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO	BIT(6)
73 	#define PHY_CTRL_R14_BYPASS_CTRL_7_0			GENMASK(15, 8)
74 	#define PHY_CTRL_R14_BYPASS_CTRL_15_8			GENMASK(23, 16)
75 
76 #define PHY_CTRL_R15						0x3c
77 #define PHY_CTRL_R16						0x40
78 	#define PHY_CTRL_R16_MPLL_M				GENMASK(8, 0)
79 	#define PHY_CTRL_R16_MPLL_N				GENMASK(14, 10)
80 	#define PHY_CTRL_R16_MPLL_TDC_MODE			BIT(20)
81 	#define PHY_CTRL_R16_MPLL_SDM_EN			BIT(21)
82 	#define PHY_CTRL_R16_MPLL_LOAD				BIT(22)
83 	#define PHY_CTRL_R16_MPLL_DCO_SDM_EN			BIT(23)
84 	#define PHY_CTRL_R16_MPLL_LOCK_LONG			GENMASK(25, 24)
85 	#define PHY_CTRL_R16_MPLL_LOCK_F			BIT(26)
86 	#define PHY_CTRL_R16_MPLL_FAST_LOCK			BIT(27)
87 	#define PHY_CTRL_R16_MPLL_EN				BIT(28)
88 	#define PHY_CTRL_R16_MPLL_RESET				BIT(29)
89 	#define PHY_CTRL_R16_MPLL_LOCK				BIT(30)
90 	#define PHY_CTRL_R16_MPLL_LOCK_DIG			BIT(31)
91 
92 #define PHY_CTRL_R17						0x44
93 	#define PHY_CTRL_R17_MPLL_FRAC_IN			GENMASK(13, 0)
94 	#define PHY_CTRL_R17_MPLL_FIX_EN			BIT(16)
95 	#define PHY_CTRL_R17_MPLL_LAMBDA1			GENMASK(19, 17)
96 	#define PHY_CTRL_R17_MPLL_LAMBDA0			GENMASK(22, 20)
97 	#define PHY_CTRL_R17_MPLL_FILTER_MODE			BIT(23)
98 	#define PHY_CTRL_R17_MPLL_FILTER_PVT2			GENMASK(27, 24)
99 	#define PHY_CTRL_R17_MPLL_FILTER_PVT1			GENMASK(31, 28)
100 
101 #define PHY_CTRL_R18						0x48
102 	#define PHY_CTRL_R18_MPLL_LKW_SEL			GENMASK(1, 0)
103 	#define PHY_CTRL_R18_MPLL_LK_W				GENMASK(5, 2)
104 	#define PHY_CTRL_R18_MPLL_LK_S				GENMASK(11, 6)
105 	#define PHY_CTRL_R18_MPLL_DCO_M_EN			BIT(12)
106 	#define PHY_CTRL_R18_MPLL_DCO_CLK_SEL			BIT(13)
107 	#define PHY_CTRL_R18_MPLL_PFD_GAIN			GENMASK(15, 14)
108 	#define PHY_CTRL_R18_MPLL_ROU				GENMASK(18, 16)
109 	#define PHY_CTRL_R18_MPLL_DATA_SEL			GENMASK(21, 19)
110 	#define PHY_CTRL_R18_MPLL_BIAS_ADJ			GENMASK(23, 22)
111 	#define PHY_CTRL_R18_MPLL_BB_MODE			GENMASK(25, 24)
112 	#define PHY_CTRL_R18_MPLL_ALPHA				GENMASK(28, 26)
113 	#define PHY_CTRL_R18_MPLL_ADJ_LDO			GENMASK(30, 29)
114 	#define PHY_CTRL_R18_MPLL_ACG_RANGE			BIT(31)
115 
116 #define PHY_CTRL_R19						0x4c
117 #define PHY_CTRL_R20						0x50
118 	#define PHY_CTRL_R20_USB2_IDDET_EN			BIT(0)
119 	#define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0		GENMASK(3, 1)
120 	#define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN		BIT(4)
121 	#define PHY_CTRL_R20_USB2_AMON_EN			BIT(5)
122 	#define PHY_CTRL_R20_USB2_CAL_CODE_R5			BIT(6)
123 	#define PHY_CTRL_R20_BYPASS_OTG_DET			BIT(7)
124 	#define PHY_CTRL_R20_USB2_DMON_EN			BIT(8)
125 	#define PHY_CTRL_R20_USB2_DMON_SEL_3_0			GENMASK(12, 9)
126 	#define PHY_CTRL_R20_USB2_EDGE_DRV_EN			BIT(13)
127 	#define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0		GENMASK(15, 14)
128 	#define PHY_CTRL_R20_USB2_BGR_ADJ_4_0			GENMASK(20, 16)
129 	#define PHY_CTRL_R20_USB2_BGR_START			BIT(21)
130 	#define PHY_CTRL_R20_USB2_BGR_VREF_4_0			GENMASK(28, 24)
131 	#define PHY_CTRL_R20_USB2_BGR_DBG_1_0			GENMASK(30, 29)
132 	#define PHY_CTRL_R20_BYPASS_CAL_DONE_R5			BIT(31)
133 
134 #define PHY_CTRL_R21						0x54
135 	#define PHY_CTRL_R21_USB2_BGR_FORCE			BIT(0)
136 	#define PHY_CTRL_R21_USB2_CAL_ACK_EN			BIT(1)
137 	#define PHY_CTRL_R21_USB2_OTG_ACA_EN			BIT(2)
138 	#define PHY_CTRL_R21_USB2_TX_STRG_PD			BIT(3)
139 	#define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0		GENMASK(5, 4)
140 	#define PHY_CTRL_R21_BYPASS_UTMI_CNTR			GENMASK(15, 6)
141 	#define PHY_CTRL_R21_BYPASS_UTMI_REG			GENMASK(25, 20)
142 
143 #define PHY_CTRL_R22						0x58
144 #define PHY_CTRL_R23						0x5c
145 
146 #define RESET_COMPLETE_TIME					1000
147 #define PLL_RESET_COMPLETE_TIME					100
148 
149 enum meson_soc_id {
150 	MESON_SOC_G12A  = 0,
151 	MESON_SOC_A1,
152 };
153 
154 struct phy_meson_g12a_usb2_priv {
155 	struct device		*dev;
156 	struct regmap		*regmap;
157 	struct clk		*clk;
158 	struct reset_control	*reset;
159 	int                     soc_id;
160 };
161 
162 static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
163 	.reg_bits = 8,
164 	.val_bits = 32,
165 	.reg_stride = 4,
166 	.max_register = PHY_CTRL_R23,
167 };
168 
169 static int phy_meson_g12a_usb2_init(struct phy *phy)
170 {
171 	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
172 	int ret;
173 	unsigned int value;
174 
175 	ret = clk_prepare_enable(priv->clk);
176 	if (ret)
177 		return ret;
178 
179 	ret = reset_control_reset(priv->reset);
180 	if (ret) {
181 		clk_disable_unprepare(priv->clk);
182 		return ret;
183 	}
184 
185 	udelay(RESET_COMPLETE_TIME);
186 
187 	/* usb2_otg_aca_en == 0 */
188 	regmap_update_bits(priv->regmap, PHY_CTRL_R21,
189 			   PHY_CTRL_R21_USB2_OTG_ACA_EN, 0);
190 
191 	/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
192 	regmap_write(priv->regmap, PHY_CTRL_R16,
193 		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
194 		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
195 		     PHY_CTRL_R16_MPLL_LOAD |
196 		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
197 		     PHY_CTRL_R16_MPLL_FAST_LOCK |
198 		     PHY_CTRL_R16_MPLL_EN |
199 		     PHY_CTRL_R16_MPLL_RESET);
200 
201 	regmap_write(priv->regmap, PHY_CTRL_R17,
202 		     FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) |
203 		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) |
204 		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) |
205 		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
206 		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
207 
208 	value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
209 		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
210 		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
211 		FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
212 		FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
213 		FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
214 		FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
215 		FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
216 		FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
217 		FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
218 		PHY_CTRL_R18_MPLL_ACG_RANGE;
219 
220 	if (priv->soc_id == MESON_SOC_A1)
221 		value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL;
222 
223 	regmap_write(priv->regmap, PHY_CTRL_R18, value);
224 
225 	udelay(PLL_RESET_COMPLETE_TIME);
226 
227 	/* UnReset PLL */
228 	regmap_write(priv->regmap, PHY_CTRL_R16,
229 		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
230 		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
231 		     PHY_CTRL_R16_MPLL_LOAD |
232 		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
233 		     PHY_CTRL_R16_MPLL_FAST_LOCK |
234 		     PHY_CTRL_R16_MPLL_EN);
235 
236 	/* PHY Tuning */
237 	regmap_write(priv->regmap, PHY_CTRL_R20,
238 		     FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) |
239 		     PHY_CTRL_R20_USB2_OTG_VBUSDET_EN |
240 		     FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) |
241 		     PHY_CTRL_R20_USB2_EDGE_DRV_EN |
242 		     FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) |
243 		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) |
244 		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
245 		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
246 
247 	if (priv->soc_id == MESON_SOC_G12A)
248 		regmap_write(priv->regmap, PHY_CTRL_R4,
249 			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
250 			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
251 			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
252 			     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
253 			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
254 			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
255 	else if (priv->soc_id == MESON_SOC_A1) {
256 		regmap_write(priv->regmap, PHY_CTRL_R21,
257 			     PHY_CTRL_R21_USB2_CAL_ACK_EN |
258 			     PHY_CTRL_R21_USB2_TX_STRG_PD |
259 			     FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2));
260 
261 		/* Analog Settings */
262 		regmap_write(priv->regmap, PHY_CTRL_R13,
263 			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
264 	}
265 
266 	/* Tuning Disconnect Threshold */
267 	regmap_write(priv->regmap, PHY_CTRL_R3,
268 		     FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) |
269 		     FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
270 		     FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
271 
272 	if (priv->soc_id == MESON_SOC_G12A) {
273 		/* Analog Settings */
274 		regmap_write(priv->regmap, PHY_CTRL_R14, 0);
275 		regmap_write(priv->regmap, PHY_CTRL_R13,
276 			     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
277 			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
278 	}
279 
280 	return 0;
281 }
282 
283 static int phy_meson_g12a_usb2_exit(struct phy *phy)
284 {
285 	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
286 	int ret;
287 
288 	ret = reset_control_reset(priv->reset);
289 	if (!ret)
290 		clk_disable_unprepare(priv->clk);
291 
292 	return ret;
293 }
294 
295 /* set_mode is not needed, mode setting is handled via the UTMI bus */
296 static const struct phy_ops phy_meson_g12a_usb2_ops = {
297 	.init		= phy_meson_g12a_usb2_init,
298 	.exit		= phy_meson_g12a_usb2_exit,
299 	.owner		= THIS_MODULE,
300 };
301 
302 static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
303 {
304 	struct device *dev = &pdev->dev;
305 	struct phy_provider *phy_provider;
306 	struct phy_meson_g12a_usb2_priv *priv;
307 	struct phy *phy;
308 	void __iomem *base;
309 	int ret;
310 
311 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
312 	if (!priv)
313 		return -ENOMEM;
314 
315 	priv->dev = dev;
316 	platform_set_drvdata(pdev, priv);
317 
318 	base = devm_platform_ioremap_resource(pdev, 0);
319 	if (IS_ERR(base))
320 		return PTR_ERR(base);
321 
322 	priv->soc_id = (uintptr_t)of_device_get_match_data(&pdev->dev);
323 
324 	priv->regmap = devm_regmap_init_mmio(dev, base,
325 					     &phy_meson_g12a_usb2_regmap_conf);
326 	if (IS_ERR(priv->regmap))
327 		return PTR_ERR(priv->regmap);
328 
329 	priv->clk = devm_clk_get(dev, "xtal");
330 	if (IS_ERR(priv->clk))
331 		return PTR_ERR(priv->clk);
332 
333 	priv->reset = devm_reset_control_get(dev, "phy");
334 	if (IS_ERR(priv->reset))
335 		return PTR_ERR(priv->reset);
336 
337 	ret = reset_control_deassert(priv->reset);
338 	if (ret)
339 		return ret;
340 
341 	phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops);
342 	if (IS_ERR(phy)) {
343 		ret = PTR_ERR(phy);
344 		if (ret != -EPROBE_DEFER)
345 			dev_err(dev, "failed to create PHY\n");
346 
347 		return ret;
348 	}
349 
350 	phy_set_bus_width(phy, 8);
351 	phy_set_drvdata(phy, priv);
352 
353 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
354 
355 	return PTR_ERR_OR_ZERO(phy_provider);
356 }
357 
358 static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
359 	{
360 		.compatible = "amlogic,g12a-usb2-phy",
361 		.data = (void *)MESON_SOC_G12A,
362 	},
363 	{
364 		.compatible = "amlogic,a1-usb2-phy",
365 		.data = (void *)MESON_SOC_A1,
366 	},
367 	{ /* Sentinel */ }
368 };
369 MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
370 
371 static struct platform_driver phy_meson_g12a_usb2_driver = {
372 	.probe	= phy_meson_g12a_usb2_probe,
373 	.driver	= {
374 		.name		= "phy-meson-g12a-usb2",
375 		.of_match_table	= phy_meson_g12a_usb2_of_match,
376 	},
377 };
378 module_platform_driver(phy_meson_g12a_usb2_driver);
379 
380 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
381 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
382 MODULE_DESCRIPTION("Meson G12A USB2 PHY driver");
383 MODULE_LICENSE("GPL v2");
384