1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * STMicroelectronics STM32 USB PHY Controller driver 4 * 5 * Copyright (C) 2018 STMicroelectronics 6 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. 7 */ 8 #include <linux/bitfield.h> 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/io.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/of_platform.h> 15 #include <linux/phy/phy.h> 16 #include <linux/reset.h> 17 18 #define STM32_USBPHYC_PLL 0x0 19 #define STM32_USBPHYC_MISC 0x8 20 #define STM32_USBPHYC_VERSION 0x3F4 21 22 /* STM32_USBPHYC_PLL bit fields */ 23 #define PLLNDIV GENMASK(6, 0) 24 #define PLLFRACIN GENMASK(25, 10) 25 #define PLLEN BIT(26) 26 #define PLLSTRB BIT(27) 27 #define PLLSTRBYP BIT(28) 28 #define PLLFRACCTL BIT(29) 29 #define PLLDITHEN0 BIT(30) 30 #define PLLDITHEN1 BIT(31) 31 32 /* STM32_USBPHYC_MISC bit fields */ 33 #define SWITHOST BIT(0) 34 35 /* STM32_USBPHYC_VERSION bit fields */ 36 #define MINREV GENMASK(3, 0) 37 #define MAJREV GENMASK(7, 4) 38 39 static const char * const supplies_names[] = { 40 "vdda1v1", /* 1V1 */ 41 "vdda1v8", /* 1V8 */ 42 }; 43 44 #define NUM_SUPPLIES ARRAY_SIZE(supplies_names) 45 46 #define PLL_LOCK_TIME_US 100 47 #define PLL_PWR_DOWN_TIME_US 5 48 #define PLL_FVCO_MHZ 2880 49 #define PLL_INFF_MIN_RATE_HZ 19200000 50 #define PLL_INFF_MAX_RATE_HZ 38400000 51 #define HZ_PER_MHZ 1000000L 52 53 struct pll_params { 54 u8 ndiv; 55 u16 frac; 56 }; 57 58 struct stm32_usbphyc_phy { 59 struct phy *phy; 60 struct stm32_usbphyc *usbphyc; 61 struct regulator_bulk_data supplies[NUM_SUPPLIES]; 62 u32 index; 63 bool active; 64 }; 65 66 struct stm32_usbphyc { 67 struct device *dev; 68 void __iomem *base; 69 struct clk *clk; 70 struct reset_control *rst; 71 struct stm32_usbphyc_phy **phys; 72 int nphys; 73 int switch_setup; 74 }; 75 76 static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) 77 { 78 writel_relaxed(readl_relaxed(reg) | bits, reg); 79 } 80 81 static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) 82 { 83 writel_relaxed(readl_relaxed(reg) & ~bits, reg); 84 } 85 86 static void stm32_usbphyc_get_pll_params(u32 clk_rate, 87 struct pll_params *pll_params) 88 { 89 unsigned long long fvco, ndiv, frac; 90 91 /* _ 92 * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 93 * | FVCO = 2880MHz 94 * < 95 * | NDIV = integer part of input bits to set the LDF 96 * |_FRACT = fractional part of input bits to set the LDF 97 * => PLLNDIV = integer part of (FVCO / (INFF*2)) 98 * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 99 * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 100 */ 101 fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; 102 103 ndiv = fvco; 104 do_div(ndiv, (clk_rate * 2)); 105 pll_params->ndiv = (u8)ndiv; 106 107 frac = fvco * (1 << 16); 108 do_div(frac, (clk_rate * 2)); 109 frac = frac - (ndiv * (1 << 16)); 110 pll_params->frac = (u16)frac; 111 } 112 113 static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) 114 { 115 struct pll_params pll_params; 116 u32 clk_rate = clk_get_rate(usbphyc->clk); 117 u32 ndiv, frac; 118 u32 usbphyc_pll; 119 120 if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || 121 (clk_rate > PLL_INFF_MAX_RATE_HZ)) { 122 dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", 123 clk_rate); 124 return -EINVAL; 125 } 126 127 stm32_usbphyc_get_pll_params(clk_rate, &pll_params); 128 ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); 129 frac = FIELD_PREP(PLLFRACIN, pll_params.frac); 130 131 usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; 132 133 if (pll_params.frac) 134 usbphyc_pll |= PLLFRACCTL | frac; 135 136 writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); 137 138 dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", 139 clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), 140 FIELD_GET(PLLFRACIN, usbphyc_pll)); 141 142 return 0; 143 } 144 145 static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc) 146 { 147 int i; 148 149 for (i = 0; i < usbphyc->nphys; i++) 150 if (usbphyc->phys[i]->active) 151 return true; 152 153 return false; 154 } 155 156 static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) 157 { 158 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; 159 bool pllen = (readl_relaxed(pll_reg) & PLLEN); 160 int ret; 161 162 /* Check if one phy port has already configured the pll */ 163 if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc)) 164 return 0; 165 166 if (pllen) { 167 stm32_usbphyc_clr_bits(pll_reg, PLLEN); 168 /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ 169 udelay(PLL_PWR_DOWN_TIME_US); 170 } 171 172 ret = stm32_usbphyc_pll_init(usbphyc); 173 if (ret) 174 return ret; 175 176 stm32_usbphyc_set_bits(pll_reg, PLLEN); 177 178 /* Wait for maximum lock time */ 179 udelay(PLL_LOCK_TIME_US); 180 181 if (!(readl_relaxed(pll_reg) & PLLEN)) { 182 dev_err(usbphyc->dev, "PLLEN not set\n"); 183 return -EIO; 184 } 185 186 return 0; 187 } 188 189 static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) 190 { 191 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; 192 193 /* Check if other phy port active */ 194 if (stm32_usbphyc_has_one_phy_active(usbphyc)) 195 return 0; 196 197 stm32_usbphyc_clr_bits(pll_reg, PLLEN); 198 /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ 199 udelay(PLL_PWR_DOWN_TIME_US); 200 201 if (readl_relaxed(pll_reg) & PLLEN) { 202 dev_err(usbphyc->dev, "PLL not reset\n"); 203 return -EIO; 204 } 205 206 return 0; 207 } 208 209 static int stm32_usbphyc_phy_init(struct phy *phy) 210 { 211 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 212 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; 213 int ret; 214 215 ret = stm32_usbphyc_pll_enable(usbphyc); 216 if (ret) 217 return ret; 218 219 usbphyc_phy->active = true; 220 221 return 0; 222 } 223 224 static int stm32_usbphyc_phy_exit(struct phy *phy) 225 { 226 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 227 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; 228 229 usbphyc_phy->active = false; 230 231 return stm32_usbphyc_pll_disable(usbphyc); 232 } 233 234 static int stm32_usbphyc_phy_power_on(struct phy *phy) 235 { 236 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 237 238 return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies); 239 } 240 241 static int stm32_usbphyc_phy_power_off(struct phy *phy) 242 { 243 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); 244 245 return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies); 246 } 247 248 static const struct phy_ops stm32_usbphyc_phy_ops = { 249 .init = stm32_usbphyc_phy_init, 250 .exit = stm32_usbphyc_phy_exit, 251 .power_on = stm32_usbphyc_phy_power_on, 252 .power_off = stm32_usbphyc_phy_power_off, 253 .owner = THIS_MODULE, 254 }; 255 256 static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, 257 u32 utmi_switch) 258 { 259 if (!utmi_switch) 260 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, 261 SWITHOST); 262 else 263 stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, 264 SWITHOST); 265 usbphyc->switch_setup = utmi_switch; 266 } 267 268 static struct phy *stm32_usbphyc_of_xlate(struct device *dev, 269 struct of_phandle_args *args) 270 { 271 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); 272 struct stm32_usbphyc_phy *usbphyc_phy = NULL; 273 struct device_node *phynode = args->np; 274 int port = 0; 275 276 for (port = 0; port < usbphyc->nphys; port++) { 277 if (phynode == usbphyc->phys[port]->phy->dev.of_node) { 278 usbphyc_phy = usbphyc->phys[port]; 279 break; 280 } 281 } 282 if (!usbphyc_phy) { 283 dev_err(dev, "failed to find phy\n"); 284 return ERR_PTR(-EINVAL); 285 } 286 287 if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || 288 ((usbphyc_phy->index == 1) && (args->args_count != 1))) { 289 dev_err(dev, "invalid number of cells for phy port%d\n", 290 usbphyc_phy->index); 291 return ERR_PTR(-EINVAL); 292 } 293 294 /* Configure the UTMI switch for PHY port#2 */ 295 if (usbphyc_phy->index == 1) { 296 if (usbphyc->switch_setup < 0) { 297 stm32_usbphyc_switch_setup(usbphyc, args->args[0]); 298 } else { 299 if (args->args[0] != usbphyc->switch_setup) { 300 dev_err(dev, "phy port1 already used\n"); 301 return ERR_PTR(-EBUSY); 302 } 303 } 304 } 305 306 return usbphyc_phy->phy; 307 } 308 309 static int stm32_usbphyc_probe(struct platform_device *pdev) 310 { 311 struct stm32_usbphyc *usbphyc; 312 struct device *dev = &pdev->dev; 313 struct device_node *child, *np = dev->of_node; 314 struct resource *res; 315 struct phy_provider *phy_provider; 316 u32 version; 317 int ret, port = 0; 318 319 usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); 320 if (!usbphyc) 321 return -ENOMEM; 322 usbphyc->dev = dev; 323 dev_set_drvdata(dev, usbphyc); 324 325 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 326 usbphyc->base = devm_ioremap_resource(dev, res); 327 if (IS_ERR(usbphyc->base)) 328 return PTR_ERR(usbphyc->base); 329 330 usbphyc->clk = devm_clk_get(dev, 0); 331 if (IS_ERR(usbphyc->clk)) { 332 ret = PTR_ERR(usbphyc->clk); 333 dev_err(dev, "clk get failed: %d\n", ret); 334 return ret; 335 } 336 337 ret = clk_prepare_enable(usbphyc->clk); 338 if (ret) { 339 dev_err(dev, "clk enable failed: %d\n", ret); 340 return ret; 341 } 342 343 usbphyc->rst = devm_reset_control_get(dev, 0); 344 if (!IS_ERR(usbphyc->rst)) { 345 reset_control_assert(usbphyc->rst); 346 udelay(2); 347 reset_control_deassert(usbphyc->rst); 348 } 349 350 usbphyc->switch_setup = -EINVAL; 351 usbphyc->nphys = of_get_child_count(np); 352 usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, 353 sizeof(*usbphyc->phys), GFP_KERNEL); 354 if (!usbphyc->phys) { 355 ret = -ENOMEM; 356 goto clk_disable; 357 } 358 359 for_each_child_of_node(np, child) { 360 struct stm32_usbphyc_phy *usbphyc_phy; 361 struct phy *phy; 362 u32 index; 363 int i; 364 365 phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); 366 if (IS_ERR(phy)) { 367 ret = PTR_ERR(phy); 368 if (ret != -EPROBE_DEFER) 369 dev_err(dev, "failed to create phy%d: %d\n", 370 port, ret); 371 goto put_child; 372 } 373 374 usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), 375 GFP_KERNEL); 376 if (!usbphyc_phy) { 377 ret = -ENOMEM; 378 goto put_child; 379 } 380 381 for (i = 0; i < NUM_SUPPLIES; i++) 382 usbphyc_phy->supplies[i].supply = supplies_names[i]; 383 384 ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES, 385 usbphyc_phy->supplies); 386 if (ret) { 387 if (ret != -EPROBE_DEFER) 388 dev_err(&phy->dev, 389 "failed to get regulators: %d\n", ret); 390 goto put_child; 391 } 392 393 ret = of_property_read_u32(child, "reg", &index); 394 if (ret || index > usbphyc->nphys) { 395 dev_err(&phy->dev, "invalid reg property: %d\n", ret); 396 goto put_child; 397 } 398 399 usbphyc->phys[port] = usbphyc_phy; 400 phy_set_bus_width(phy, 8); 401 phy_set_drvdata(phy, usbphyc_phy); 402 403 usbphyc->phys[port]->phy = phy; 404 usbphyc->phys[port]->usbphyc = usbphyc; 405 usbphyc->phys[port]->index = index; 406 usbphyc->phys[port]->active = false; 407 408 port++; 409 } 410 411 phy_provider = devm_of_phy_provider_register(dev, 412 stm32_usbphyc_of_xlate); 413 if (IS_ERR(phy_provider)) { 414 ret = PTR_ERR(phy_provider); 415 dev_err(dev, "failed to register phy provider: %d\n", ret); 416 goto clk_disable; 417 } 418 419 version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); 420 dev_info(dev, "registered rev:%lu.%lu\n", 421 FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); 422 423 return 0; 424 425 put_child: 426 of_node_put(child); 427 clk_disable: 428 clk_disable_unprepare(usbphyc->clk); 429 430 return ret; 431 } 432 433 static int stm32_usbphyc_remove(struct platform_device *pdev) 434 { 435 struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); 436 437 clk_disable_unprepare(usbphyc->clk); 438 439 return 0; 440 } 441 442 static const struct of_device_id stm32_usbphyc_of_match[] = { 443 { .compatible = "st,stm32mp1-usbphyc", }, 444 { }, 445 }; 446 MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); 447 448 static struct platform_driver stm32_usbphyc_driver = { 449 .probe = stm32_usbphyc_probe, 450 .remove = stm32_usbphyc_remove, 451 .driver = { 452 .of_match_table = stm32_usbphyc_of_match, 453 .name = "stm32-usbphyc", 454 } 455 }; 456 module_platform_driver(stm32_usbphyc_driver); 457 458 MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); 459 MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); 460 MODULE_LICENSE("GPL v2"); 461