1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Broadcom BCM590xx regulator driver
4  *
5  * Copyright 2014 Linaro Limited
6  * Author: Matt Porter <mporter@linaro.org>
7  */
8 
9 #include <linux/err.h>
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/mfd/bcm590xx.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/platform_device.h>
16 #include <linux/regulator/driver.h>
17 #include <linux/regulator/machine.h>
18 #include <linux/regulator/of_regulator.h>
19 #include <linux/slab.h>
20 
21 /* I2C slave 0 registers */
22 #define BCM590XX_RFLDOPMCTRL1	0x60
23 #define BCM590XX_IOSR1PMCTRL1	0x7a
24 #define BCM590XX_IOSR2PMCTRL1	0x7c
25 #define BCM590XX_CSRPMCTRL1	0x7e
26 #define BCM590XX_SDSR1PMCTRL1	0x82
27 #define BCM590XX_SDSR2PMCTRL1	0x86
28 #define BCM590XX_MSRPMCTRL1	0x8a
29 #define BCM590XX_VSRPMCTRL1	0x8e
30 #define BCM590XX_RFLDOCTRL	0x96
31 #define BCM590XX_CSRVOUT1	0xc0
32 
33 /* I2C slave 1 registers */
34 #define BCM590XX_GPLDO5PMCTRL1	0x16
35 #define BCM590XX_GPLDO6PMCTRL1	0x18
36 #define BCM590XX_GPLDO1CTRL	0x1a
37 #define BCM590XX_GPLDO2CTRL	0x1b
38 #define BCM590XX_GPLDO3CTRL	0x1c
39 #define BCM590XX_GPLDO4CTRL	0x1d
40 #define BCM590XX_GPLDO5CTRL	0x1e
41 #define BCM590XX_GPLDO6CTRL	0x1f
42 #define BCM590XX_OTG_CTRL	0x40
43 #define BCM590XX_GPLDO1PMCTRL1	0x57
44 #define BCM590XX_GPLDO2PMCTRL1	0x59
45 #define BCM590XX_GPLDO3PMCTRL1	0x5b
46 #define BCM590XX_GPLDO4PMCTRL1	0x5d
47 
48 #define BCM590XX_REG_ENABLE	BIT(7)
49 #define BCM590XX_VBUS_ENABLE	BIT(2)
50 #define BCM590XX_LDO_VSEL_MASK	GENMASK(5, 3)
51 #define BCM590XX_SR_VSEL_MASK	GENMASK(5, 0)
52 
53 /*
54  * RFLDO to VSR regulators are
55  * accessed via I2C slave 0
56  */
57 
58 /* LDO regulator IDs */
59 #define BCM590XX_REG_RFLDO	0
60 #define BCM590XX_REG_CAMLDO1	1
61 #define BCM590XX_REG_CAMLDO2	2
62 #define BCM590XX_REG_SIMLDO1	3
63 #define BCM590XX_REG_SIMLDO2	4
64 #define BCM590XX_REG_SDLDO	5
65 #define BCM590XX_REG_SDXLDO	6
66 #define BCM590XX_REG_MMCLDO1	7
67 #define BCM590XX_REG_MMCLDO2	8
68 #define BCM590XX_REG_AUDLDO	9
69 #define BCM590XX_REG_MICLDO	10
70 #define BCM590XX_REG_USBLDO	11
71 #define BCM590XX_REG_VIBLDO	12
72 
73 /* DCDC regulator IDs */
74 #define BCM590XX_REG_CSR	13
75 #define BCM590XX_REG_IOSR1	14
76 #define BCM590XX_REG_IOSR2	15
77 #define BCM590XX_REG_MSR	16
78 #define BCM590XX_REG_SDSR1	17
79 #define BCM590XX_REG_SDSR2	18
80 #define BCM590XX_REG_VSR	19
81 
82 /*
83  * GPLDO1 to VBUS regulators are
84  * accessed via I2C slave 1
85  */
86 
87 #define BCM590XX_REG_GPLDO1	20
88 #define BCM590XX_REG_GPLDO2	21
89 #define BCM590XX_REG_GPLDO3	22
90 #define BCM590XX_REG_GPLDO4	23
91 #define BCM590XX_REG_GPLDO5	24
92 #define BCM590XX_REG_GPLDO6	25
93 #define BCM590XX_REG_VBUS	26
94 
95 #define BCM590XX_NUM_REGS	27
96 
97 #define BCM590XX_REG_IS_LDO(n)	(n < BCM590XX_REG_CSR)
98 #define BCM590XX_REG_IS_GPLDO(n) \
99 	((n > BCM590XX_REG_VSR) && (n < BCM590XX_REG_VBUS))
100 #define BCM590XX_REG_IS_VBUS(n)	(n == BCM590XX_REG_VBUS)
101 
102 /* LDO group A: supported voltages in microvolts */
103 static const unsigned int ldo_a_table[] = {
104 	1200000, 1800000, 2500000, 2700000, 2800000,
105 	2900000, 3000000, 3300000,
106 };
107 
108 /* LDO group C: supported voltages in microvolts */
109 static const unsigned int ldo_c_table[] = {
110 	3100000, 1800000, 2500000, 2700000, 2800000,
111 	2900000, 3000000, 3300000,
112 };
113 
114 static const unsigned int ldo_vbus[] = {
115 	5000000,
116 };
117 
118 /* DCDC group CSR: supported voltages in microvolts */
119 static const struct linear_range dcdc_csr_ranges[] = {
120 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
121 	REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000),
122 	REGULATOR_LINEAR_RANGE(900000, 56, 63, 0),
123 };
124 
125 /* DCDC group IOSR1: supported voltages in microvolts */
126 static const struct linear_range dcdc_iosr1_ranges[] = {
127 	REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000),
128 	REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0),
129 	REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0),
130 	REGULATOR_LINEAR_RANGE(900000, 54, 63, 0),
131 };
132 
133 /* DCDC group SDSR1: supported voltages in microvolts */
134 static const struct linear_range dcdc_sdsr1_ranges[] = {
135 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
136 	REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0),
137 	REGULATOR_LINEAR_RANGE(900000, 52, 63, 0),
138 };
139 
140 struct bcm590xx_info {
141 	const char *name;
142 	const char *vin_name;
143 	u8 n_voltages;
144 	const unsigned int *volt_table;
145 	u8 n_linear_ranges;
146 	const struct linear_range *linear_ranges;
147 };
148 
149 #define BCM590XX_REG_TABLE(_name, _table) \
150 	{ \
151 		.name = #_name, \
152 		.n_voltages = ARRAY_SIZE(_table), \
153 		.volt_table = _table, \
154 	}
155 
156 #define BCM590XX_REG_RANGES(_name, _ranges) \
157 	{ \
158 		.name = #_name, \
159 		.n_voltages = 64, \
160 		.n_linear_ranges = ARRAY_SIZE(_ranges), \
161 		.linear_ranges = _ranges, \
162 	}
163 
164 static struct bcm590xx_info bcm590xx_regs[] = {
165 	BCM590XX_REG_TABLE(rfldo, ldo_a_table),
166 	BCM590XX_REG_TABLE(camldo1, ldo_c_table),
167 	BCM590XX_REG_TABLE(camldo2, ldo_c_table),
168 	BCM590XX_REG_TABLE(simldo1, ldo_a_table),
169 	BCM590XX_REG_TABLE(simldo2, ldo_a_table),
170 	BCM590XX_REG_TABLE(sdldo, ldo_c_table),
171 	BCM590XX_REG_TABLE(sdxldo, ldo_a_table),
172 	BCM590XX_REG_TABLE(mmcldo1, ldo_a_table),
173 	BCM590XX_REG_TABLE(mmcldo2, ldo_a_table),
174 	BCM590XX_REG_TABLE(audldo, ldo_a_table),
175 	BCM590XX_REG_TABLE(micldo, ldo_a_table),
176 	BCM590XX_REG_TABLE(usbldo, ldo_a_table),
177 	BCM590XX_REG_TABLE(vibldo, ldo_c_table),
178 	BCM590XX_REG_RANGES(csr, dcdc_csr_ranges),
179 	BCM590XX_REG_RANGES(iosr1, dcdc_iosr1_ranges),
180 	BCM590XX_REG_RANGES(iosr2, dcdc_iosr1_ranges),
181 	BCM590XX_REG_RANGES(msr, dcdc_iosr1_ranges),
182 	BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges),
183 	BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges),
184 	BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges),
185 	BCM590XX_REG_TABLE(gpldo1, ldo_a_table),
186 	BCM590XX_REG_TABLE(gpldo2, ldo_a_table),
187 	BCM590XX_REG_TABLE(gpldo3, ldo_a_table),
188 	BCM590XX_REG_TABLE(gpldo4, ldo_a_table),
189 	BCM590XX_REG_TABLE(gpldo5, ldo_a_table),
190 	BCM590XX_REG_TABLE(gpldo6, ldo_a_table),
191 	BCM590XX_REG_TABLE(vbus, ldo_vbus),
192 };
193 
194 struct bcm590xx_reg {
195 	struct regulator_desc *desc;
196 	struct bcm590xx *mfd;
197 };
198 
199 static int bcm590xx_get_vsel_register(int id)
200 {
201 	if (BCM590XX_REG_IS_LDO(id))
202 		return BCM590XX_RFLDOCTRL + id;
203 	else if (BCM590XX_REG_IS_GPLDO(id))
204 		return BCM590XX_GPLDO1CTRL + id;
205 	else
206 		return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3;
207 }
208 
209 static int bcm590xx_get_enable_register(int id)
210 {
211 	int reg = 0;
212 
213 	if (BCM590XX_REG_IS_LDO(id))
214 		reg = BCM590XX_RFLDOPMCTRL1 + id * 2;
215 	else if (BCM590XX_REG_IS_GPLDO(id))
216 		reg = BCM590XX_GPLDO1PMCTRL1 + id * 2;
217 	else
218 		switch (id) {
219 		case BCM590XX_REG_CSR:
220 			reg = BCM590XX_CSRPMCTRL1;
221 			break;
222 		case BCM590XX_REG_IOSR1:
223 			reg = BCM590XX_IOSR1PMCTRL1;
224 			break;
225 		case BCM590XX_REG_IOSR2:
226 			reg = BCM590XX_IOSR2PMCTRL1;
227 			break;
228 		case BCM590XX_REG_MSR:
229 			reg = BCM590XX_MSRPMCTRL1;
230 			break;
231 		case BCM590XX_REG_SDSR1:
232 			reg = BCM590XX_SDSR1PMCTRL1;
233 			break;
234 		case BCM590XX_REG_SDSR2:
235 			reg = BCM590XX_SDSR2PMCTRL1;
236 			break;
237 		case BCM590XX_REG_VSR:
238 			reg = BCM590XX_VSRPMCTRL1;
239 			break;
240 		case BCM590XX_REG_VBUS:
241 			reg = BCM590XX_OTG_CTRL;
242 			break;
243 		}
244 
245 
246 	return reg;
247 }
248 
249 static const struct regulator_ops bcm590xx_ops_ldo = {
250 	.is_enabled		= regulator_is_enabled_regmap,
251 	.enable			= regulator_enable_regmap,
252 	.disable		= regulator_disable_regmap,
253 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
254 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
255 	.list_voltage		= regulator_list_voltage_table,
256 	.map_voltage		= regulator_map_voltage_iterate,
257 };
258 
259 static const struct regulator_ops bcm590xx_ops_dcdc = {
260 	.is_enabled		= regulator_is_enabled_regmap,
261 	.enable			= regulator_enable_regmap,
262 	.disable		= regulator_disable_regmap,
263 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
264 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
265 	.list_voltage		= regulator_list_voltage_linear_range,
266 	.map_voltage		= regulator_map_voltage_linear_range,
267 };
268 
269 static const struct regulator_ops bcm590xx_ops_vbus = {
270 	.is_enabled		= regulator_is_enabled_regmap,
271 	.enable			= regulator_enable_regmap,
272 	.disable		= regulator_disable_regmap,
273 };
274 
275 static int bcm590xx_probe(struct platform_device *pdev)
276 {
277 	struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent);
278 	struct bcm590xx_reg *pmu;
279 	struct regulator_config config = { };
280 	struct bcm590xx_info *info;
281 	struct regulator_dev *rdev;
282 	int i;
283 
284 	pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
285 	if (!pmu)
286 		return -ENOMEM;
287 
288 	pmu->mfd = bcm590xx;
289 
290 	platform_set_drvdata(pdev, pmu);
291 
292 	pmu->desc = devm_kcalloc(&pdev->dev,
293 				 BCM590XX_NUM_REGS,
294 				 sizeof(struct regulator_desc),
295 				 GFP_KERNEL);
296 	if (!pmu->desc)
297 		return -ENOMEM;
298 
299 	info = bcm590xx_regs;
300 
301 	for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {
302 		/* Register the regulators */
303 		pmu->desc[i].name = info->name;
304 		pmu->desc[i].of_match = of_match_ptr(info->name);
305 		pmu->desc[i].regulators_node = of_match_ptr("regulators");
306 		pmu->desc[i].supply_name = info->vin_name;
307 		pmu->desc[i].id = i;
308 		pmu->desc[i].volt_table = info->volt_table;
309 		pmu->desc[i].n_voltages = info->n_voltages;
310 		pmu->desc[i].linear_ranges = info->linear_ranges;
311 		pmu->desc[i].n_linear_ranges = info->n_linear_ranges;
312 
313 		if ((BCM590XX_REG_IS_LDO(i)) || (BCM590XX_REG_IS_GPLDO(i))) {
314 			pmu->desc[i].ops = &bcm590xx_ops_ldo;
315 			pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK;
316 		} else if (BCM590XX_REG_IS_VBUS(i))
317 			pmu->desc[i].ops = &bcm590xx_ops_vbus;
318 		else {
319 			pmu->desc[i].ops = &bcm590xx_ops_dcdc;
320 			pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK;
321 		}
322 
323 		if (BCM590XX_REG_IS_VBUS(i))
324 			pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE;
325 		else {
326 			pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i);
327 			pmu->desc[i].enable_is_inverted = true;
328 			pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE;
329 		}
330 		pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i);
331 		pmu->desc[i].type = REGULATOR_VOLTAGE;
332 		pmu->desc[i].owner = THIS_MODULE;
333 
334 		config.dev = bcm590xx->dev;
335 		config.driver_data = pmu;
336 		if (BCM590XX_REG_IS_GPLDO(i) || BCM590XX_REG_IS_VBUS(i))
337 			config.regmap = bcm590xx->regmap_sec;
338 		else
339 			config.regmap = bcm590xx->regmap_pri;
340 
341 		rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i],
342 					       &config);
343 		if (IS_ERR(rdev)) {
344 			dev_err(bcm590xx->dev,
345 				"failed to register %s regulator\n",
346 				pdev->name);
347 			return PTR_ERR(rdev);
348 		}
349 	}
350 
351 	return 0;
352 }
353 
354 static struct platform_driver bcm590xx_regulator_driver = {
355 	.driver = {
356 		.name = "bcm590xx-vregs",
357 	},
358 	.probe = bcm590xx_probe,
359 };
360 module_platform_driver(bcm590xx_regulator_driver);
361 
362 MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
363 MODULE_DESCRIPTION("BCM590xx voltage regulator driver");
364 MODULE_LICENSE("GPL v2");
365 MODULE_ALIAS("platform:bcm590xx-vregs");
366