1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // max77802.c - Regulator driver for the Maxim 77802 4 // 5 // Copyright (C) 2013-2014 Google, Inc 6 // Simon Glass <sjg@chromium.org> 7 // 8 // Copyright (C) 2012 Samsung Electronics 9 // Chiwoong Byun <woong.byun@samsung.com> 10 // Jonghwa Lee <jonghwa3.lee@samsung.com> 11 // 12 // This driver is based on max8997.c 13 14 #include <linux/kernel.h> 15 #include <linux/bug.h> 16 #include <linux/err.h> 17 #include <linux/slab.h> 18 #include <linux/module.h> 19 #include <linux/platform_device.h> 20 #include <linux/regulator/driver.h> 21 #include <linux/regulator/machine.h> 22 #include <linux/regulator/of_regulator.h> 23 #include <linux/mfd/max77686.h> 24 #include <linux/mfd/max77686-private.h> 25 #include <dt-bindings/regulator/maxim,max77802.h> 26 27 /* Default ramp delay in case it is not manually set */ 28 #define MAX77802_RAMP_DELAY 100000 /* uV/us */ 29 30 #define MAX77802_OPMODE_SHIFT_LDO 6 31 #define MAX77802_OPMODE_BUCK234_SHIFT 4 32 #define MAX77802_OPMODE_MASK 0x3 33 34 #define MAX77802_VSEL_MASK 0x3F 35 #define MAX77802_DVS_VSEL_MASK 0xFF 36 37 #define MAX77802_RAMP_RATE_MASK_2BIT 0xC0 38 #define MAX77802_RAMP_RATE_SHIFT_2BIT 6 39 #define MAX77802_RAMP_RATE_MASK_4BIT 0xF0 40 #define MAX77802_RAMP_RATE_SHIFT_4BIT 4 41 42 #define MAX77802_STATUS_OFF 0x0 43 #define MAX77802_OFF_PWRREQ 0x1 44 #define MAX77802_LP_PWRREQ 0x2 45 46 static const unsigned int max77802_buck234_ramp_table[] = { 47 12500, 48 25000, 49 50000, 50 100000, 51 }; 52 53 static const unsigned int max77802_buck16_ramp_table[] = { 54 1000, 2000, 3030, 4000, 55 5000, 5880, 7140, 8330, 56 9090, 10000, 11110, 12500, 57 16670, 25000, 50000, 100000, 58 }; 59 60 struct max77802_regulator_prv { 61 /* Array indexed by regulator id */ 62 unsigned int opmode[MAX77802_REG_MAX]; 63 }; 64 65 static inline unsigned int max77802_map_mode(unsigned int mode) 66 { 67 return mode == MAX77802_OPMODE_NORMAL ? 68 REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY; 69 } 70 71 static int max77802_get_opmode_shift(int id) 72 { 73 if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 && 74 id <= MAX77802_BUCK10)) 75 return 0; 76 77 if (id >= MAX77802_BUCK2 && id <= MAX77802_BUCK4) 78 return MAX77802_OPMODE_BUCK234_SHIFT; 79 80 if (id >= MAX77802_LDO1 && id <= MAX77802_LDO35) 81 return MAX77802_OPMODE_SHIFT_LDO; 82 83 return -EINVAL; 84 } 85 86 /** 87 * max77802_set_suspend_disable - Disable the regulator during system suspend 88 * @rdev: regulator to mark as disabled 89 * 90 * All regulators expect LDO 1, 3, 20 and 21 support OFF by PWRREQ. 91 * Configure the regulator so the PMIC will turn it OFF during system suspend. 92 */ 93 static int max77802_set_suspend_disable(struct regulator_dev *rdev) 94 { 95 unsigned int val = MAX77802_OFF_PWRREQ; 96 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 97 int id = rdev_get_id(rdev); 98 int shift = max77802_get_opmode_shift(id); 99 100 max77802->opmode[id] = val; 101 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 102 rdev->desc->enable_mask, val << shift); 103 } 104 105 /* 106 * Some LDOs support Low Power Mode while the system is running. 107 * 108 * LDOs 1, 3, 20, 21. 109 */ 110 static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode) 111 { 112 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 113 int id = rdev_get_id(rdev); 114 unsigned int val; 115 int shift = max77802_get_opmode_shift(id); 116 117 switch (mode) { 118 case REGULATOR_MODE_STANDBY: 119 val = MAX77802_OPMODE_LP; /* ON in Low Power Mode */ 120 break; 121 case REGULATOR_MODE_NORMAL: 122 val = MAX77802_OPMODE_NORMAL; /* ON in Normal Mode */ 123 break; 124 default: 125 dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", 126 rdev->desc->name, mode); 127 return -EINVAL; 128 } 129 130 max77802->opmode[id] = val; 131 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 132 rdev->desc->enable_mask, val << shift); 133 } 134 135 static unsigned max77802_get_mode(struct regulator_dev *rdev) 136 { 137 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 138 int id = rdev_get_id(rdev); 139 140 return max77802_map_mode(max77802->opmode[id]); 141 } 142 143 /** 144 * max77802_set_suspend_mode - set regulator opmode when the system is suspended 145 * @rdev: regulator to change mode 146 * @mode: operating mode to be set 147 * 148 * Will set the operating mode for the regulators during system suspend. 149 * This function is valid for the three different enable control logics: 150 * 151 * Enable Control Logic1 by PWRREQ (BUCK 2-4 and LDOs 2, 4-19, 22-35) 152 * Enable Control Logic2 by PWRREQ (LDOs 1, 20, 21) 153 * Enable Control Logic3 by PWRREQ (LDO 3) 154 * 155 * If setting the regulator mode fails, the function only warns but does 156 * not return an error code to avoid the regulator core to stop setting 157 * the operating mode for the remaining regulators. 158 */ 159 static int max77802_set_suspend_mode(struct regulator_dev *rdev, 160 unsigned int mode) 161 { 162 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 163 int id = rdev_get_id(rdev); 164 unsigned int val; 165 int shift = max77802_get_opmode_shift(id); 166 167 /* 168 * If the regulator has been disabled for suspend 169 * then is invalid to try setting a suspend mode. 170 */ 171 if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) { 172 dev_warn(&rdev->dev, "%s: is disabled, mode: 0x%x not set\n", 173 rdev->desc->name, mode); 174 return 0; 175 } 176 177 switch (mode) { 178 case REGULATOR_MODE_STANDBY: 179 /* 180 * If the regulator opmode is normal then enable 181 * ON in Low Power Mode by PWRREQ. If the mode is 182 * already Low Power then no action is required. 183 */ 184 if (max77802->opmode[id] == MAX77802_OPMODE_NORMAL) 185 val = MAX77802_LP_PWRREQ; 186 else 187 return 0; 188 break; 189 case REGULATOR_MODE_NORMAL: 190 /* 191 * If the regulator operating mode is Low Power then 192 * normal is not a valid opmode in suspend. If the 193 * mode is already normal then no action is required. 194 */ 195 if (max77802->opmode[id] == MAX77802_OPMODE_LP) 196 dev_warn(&rdev->dev, "%s: in Low Power: 0x%x invalid\n", 197 rdev->desc->name, mode); 198 return 0; 199 default: 200 dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", 201 rdev->desc->name, mode); 202 return -EINVAL; 203 } 204 205 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 206 rdev->desc->enable_mask, val << shift); 207 } 208 209 static int max77802_enable(struct regulator_dev *rdev) 210 { 211 struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); 212 int id = rdev_get_id(rdev); 213 int shift = max77802_get_opmode_shift(id); 214 215 if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) 216 max77802->opmode[id] = MAX77802_OPMODE_NORMAL; 217 218 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 219 rdev->desc->enable_mask, 220 max77802->opmode[id] << shift); 221 } 222 223 /* 224 * LDOs 2, 4-19, 22-35 225 */ 226 static const struct regulator_ops max77802_ldo_ops_logic1 = { 227 .list_voltage = regulator_list_voltage_linear, 228 .map_voltage = regulator_map_voltage_linear, 229 .is_enabled = regulator_is_enabled_regmap, 230 .enable = max77802_enable, 231 .disable = regulator_disable_regmap, 232 .get_voltage_sel = regulator_get_voltage_sel_regmap, 233 .set_voltage_sel = regulator_set_voltage_sel_regmap, 234 .set_voltage_time_sel = regulator_set_voltage_time_sel, 235 .set_suspend_disable = max77802_set_suspend_disable, 236 .set_suspend_mode = max77802_set_suspend_mode, 237 }; 238 239 /* 240 * LDOs 1, 20, 21, 3 241 */ 242 static const struct regulator_ops max77802_ldo_ops_logic2 = { 243 .list_voltage = regulator_list_voltage_linear, 244 .map_voltage = regulator_map_voltage_linear, 245 .is_enabled = regulator_is_enabled_regmap, 246 .enable = max77802_enable, 247 .disable = regulator_disable_regmap, 248 .get_voltage_sel = regulator_get_voltage_sel_regmap, 249 .set_voltage_sel = regulator_set_voltage_sel_regmap, 250 .set_voltage_time_sel = regulator_set_voltage_time_sel, 251 .set_mode = max77802_set_mode, 252 .get_mode = max77802_get_mode, 253 .set_suspend_mode = max77802_set_suspend_mode, 254 }; 255 256 /* BUCKS 1, 6 */ 257 static const struct regulator_ops max77802_buck_16_dvs_ops = { 258 .list_voltage = regulator_list_voltage_linear, 259 .map_voltage = regulator_map_voltage_linear, 260 .is_enabled = regulator_is_enabled_regmap, 261 .enable = max77802_enable, 262 .disable = regulator_disable_regmap, 263 .get_voltage_sel = regulator_get_voltage_sel_regmap, 264 .set_voltage_sel = regulator_set_voltage_sel_regmap, 265 .set_voltage_time_sel = regulator_set_voltage_time_sel, 266 .set_ramp_delay = regulator_set_ramp_delay_regmap, 267 .set_suspend_disable = max77802_set_suspend_disable, 268 }; 269 270 /* BUCKs 2-4 */ 271 static const struct regulator_ops max77802_buck_234_ops = { 272 .list_voltage = regulator_list_voltage_linear, 273 .map_voltage = regulator_map_voltage_linear, 274 .is_enabled = regulator_is_enabled_regmap, 275 .enable = max77802_enable, 276 .disable = regulator_disable_regmap, 277 .get_voltage_sel = regulator_get_voltage_sel_regmap, 278 .set_voltage_sel = regulator_set_voltage_sel_regmap, 279 .set_voltage_time_sel = regulator_set_voltage_time_sel, 280 .set_ramp_delay = regulator_set_ramp_delay_regmap, 281 .set_suspend_disable = max77802_set_suspend_disable, 282 .set_suspend_mode = max77802_set_suspend_mode, 283 }; 284 285 /* BUCKs 5, 7-10 */ 286 static const struct regulator_ops max77802_buck_dvs_ops = { 287 .list_voltage = regulator_list_voltage_linear, 288 .map_voltage = regulator_map_voltage_linear, 289 .is_enabled = regulator_is_enabled_regmap, 290 .enable = max77802_enable, 291 .disable = regulator_disable_regmap, 292 .get_voltage_sel = regulator_get_voltage_sel_regmap, 293 .set_voltage_sel = regulator_set_voltage_sel_regmap, 294 .set_voltage_time_sel = regulator_set_voltage_time_sel, 295 .set_suspend_disable = max77802_set_suspend_disable, 296 }; 297 298 /* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */ 299 #define regulator_77802_desc_p_ldo(num, supply, log) { \ 300 .name = "LDO"#num, \ 301 .of_match = of_match_ptr("LDO"#num), \ 302 .regulators_node = of_match_ptr("regulators"), \ 303 .id = MAX77802_LDO##num, \ 304 .supply_name = "inl"#supply, \ 305 .ops = &max77802_ldo_ops_logic##log, \ 306 .type = REGULATOR_VOLTAGE, \ 307 .owner = THIS_MODULE, \ 308 .min_uV = 800000, \ 309 .uV_step = 50000, \ 310 .ramp_delay = MAX77802_RAMP_DELAY, \ 311 .n_voltages = 1 << 6, \ 312 .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 313 .vsel_mask = MAX77802_VSEL_MASK, \ 314 .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 315 .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ 316 .of_map_mode = max77802_map_mode, \ 317 } 318 319 /* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */ 320 #define regulator_77802_desc_n_ldo(num, supply, log) { \ 321 .name = "LDO"#num, \ 322 .of_match = of_match_ptr("LDO"#num), \ 323 .regulators_node = of_match_ptr("regulators"), \ 324 .id = MAX77802_LDO##num, \ 325 .supply_name = "inl"#supply, \ 326 .ops = &max77802_ldo_ops_logic##log, \ 327 .type = REGULATOR_VOLTAGE, \ 328 .owner = THIS_MODULE, \ 329 .min_uV = 800000, \ 330 .uV_step = 25000, \ 331 .ramp_delay = MAX77802_RAMP_DELAY, \ 332 .n_voltages = 1 << 6, \ 333 .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 334 .vsel_mask = MAX77802_VSEL_MASK, \ 335 .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ 336 .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ 337 .of_map_mode = max77802_map_mode, \ 338 } 339 340 /* BUCKs 1, 6 */ 341 #define regulator_77802_desc_16_buck(num) { \ 342 .name = "BUCK"#num, \ 343 .of_match = of_match_ptr("BUCK"#num), \ 344 .regulators_node = of_match_ptr("regulators"), \ 345 .id = MAX77802_BUCK##num, \ 346 .supply_name = "inb"#num, \ 347 .ops = &max77802_buck_16_dvs_ops, \ 348 .type = REGULATOR_VOLTAGE, \ 349 .owner = THIS_MODULE, \ 350 .min_uV = 612500, \ 351 .uV_step = 6250, \ 352 .ramp_delay = MAX77802_RAMP_DELAY, \ 353 .n_voltages = 1 << 8, \ 354 .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ 355 .vsel_mask = MAX77802_DVS_VSEL_MASK, \ 356 .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \ 357 .enable_mask = MAX77802_OPMODE_MASK, \ 358 .ramp_reg = MAX77802_REG_BUCK ## num ## CTRL, \ 359 .ramp_mask = MAX77802_RAMP_RATE_MASK_4BIT, \ 360 .ramp_delay_table = max77802_buck16_ramp_table, \ 361 .n_ramp_values = ARRAY_SIZE(max77802_buck16_ramp_table), \ 362 .of_map_mode = max77802_map_mode, \ 363 } 364 365 /* BUCKS 2-4 */ 366 #define regulator_77802_desc_234_buck(num) { \ 367 .name = "BUCK"#num, \ 368 .of_match = of_match_ptr("BUCK"#num), \ 369 .regulators_node = of_match_ptr("regulators"), \ 370 .id = MAX77802_BUCK##num, \ 371 .supply_name = "inb"#num, \ 372 .ops = &max77802_buck_234_ops, \ 373 .type = REGULATOR_VOLTAGE, \ 374 .owner = THIS_MODULE, \ 375 .min_uV = 600000, \ 376 .uV_step = 6250, \ 377 .ramp_delay = MAX77802_RAMP_DELAY, \ 378 .n_voltages = 0x91, \ 379 .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ 380 .vsel_mask = MAX77802_DVS_VSEL_MASK, \ 381 .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \ 382 .enable_mask = MAX77802_OPMODE_MASK << \ 383 MAX77802_OPMODE_BUCK234_SHIFT, \ 384 .ramp_reg = MAX77802_REG_BUCK ## num ## CTRL1, \ 385 .ramp_mask = MAX77802_RAMP_RATE_MASK_2BIT, \ 386 .ramp_delay_table = max77802_buck234_ramp_table, \ 387 .n_ramp_values = ARRAY_SIZE(max77802_buck234_ramp_table), \ 388 .of_map_mode = max77802_map_mode, \ 389 } 390 391 /* BUCK 5 */ 392 #define regulator_77802_desc_buck5(num) { \ 393 .name = "BUCK"#num, \ 394 .of_match = of_match_ptr("BUCK"#num), \ 395 .regulators_node = of_match_ptr("regulators"), \ 396 .id = MAX77802_BUCK##num, \ 397 .supply_name = "inb"#num, \ 398 .ops = &max77802_buck_dvs_ops, \ 399 .type = REGULATOR_VOLTAGE, \ 400 .owner = THIS_MODULE, \ 401 .min_uV = 750000, \ 402 .uV_step = 50000, \ 403 .ramp_delay = MAX77802_RAMP_DELAY, \ 404 .n_voltages = 1 << 6, \ 405 .vsel_reg = MAX77802_REG_BUCK5OUT, \ 406 .vsel_mask = MAX77802_VSEL_MASK, \ 407 .enable_reg = MAX77802_REG_BUCK5CTRL, \ 408 .enable_mask = MAX77802_OPMODE_MASK, \ 409 .of_map_mode = max77802_map_mode, \ 410 } 411 412 /* BUCKs 7-10 */ 413 #define regulator_77802_desc_buck7_10(num) { \ 414 .name = "BUCK"#num, \ 415 .of_match = of_match_ptr("BUCK"#num), \ 416 .regulators_node = of_match_ptr("regulators"), \ 417 .id = MAX77802_BUCK##num, \ 418 .supply_name = "inb"#num, \ 419 .ops = &max77802_buck_dvs_ops, \ 420 .type = REGULATOR_VOLTAGE, \ 421 .owner = THIS_MODULE, \ 422 .min_uV = 750000, \ 423 .uV_step = 50000, \ 424 .ramp_delay = MAX77802_RAMP_DELAY, \ 425 .n_voltages = 1 << 6, \ 426 .vsel_reg = MAX77802_REG_BUCK7OUT + (num - 7) * 3, \ 427 .vsel_mask = MAX77802_VSEL_MASK, \ 428 .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \ 429 .enable_mask = MAX77802_OPMODE_MASK, \ 430 .of_map_mode = max77802_map_mode, \ 431 } 432 433 static const struct regulator_desc regulators[] = { 434 regulator_77802_desc_16_buck(1), 435 regulator_77802_desc_234_buck(2), 436 regulator_77802_desc_234_buck(3), 437 regulator_77802_desc_234_buck(4), 438 regulator_77802_desc_buck5(5), 439 regulator_77802_desc_16_buck(6), 440 regulator_77802_desc_buck7_10(7), 441 regulator_77802_desc_buck7_10(8), 442 regulator_77802_desc_buck7_10(9), 443 regulator_77802_desc_buck7_10(10), 444 regulator_77802_desc_n_ldo(1, 10, 2), 445 regulator_77802_desc_n_ldo(2, 10, 1), 446 regulator_77802_desc_p_ldo(3, 3, 2), 447 regulator_77802_desc_p_ldo(4, 6, 1), 448 regulator_77802_desc_p_ldo(5, 3, 1), 449 regulator_77802_desc_p_ldo(6, 3, 1), 450 regulator_77802_desc_p_ldo(7, 3, 1), 451 regulator_77802_desc_n_ldo(8, 1, 1), 452 regulator_77802_desc_p_ldo(9, 5, 1), 453 regulator_77802_desc_p_ldo(10, 4, 1), 454 regulator_77802_desc_p_ldo(11, 4, 1), 455 regulator_77802_desc_p_ldo(12, 9, 1), 456 regulator_77802_desc_p_ldo(13, 4, 1), 457 regulator_77802_desc_p_ldo(14, 4, 1), 458 regulator_77802_desc_n_ldo(15, 1, 1), 459 regulator_77802_desc_n_ldo(17, 2, 1), 460 regulator_77802_desc_p_ldo(18, 7, 1), 461 regulator_77802_desc_p_ldo(19, 5, 1), 462 regulator_77802_desc_p_ldo(20, 7, 2), 463 regulator_77802_desc_p_ldo(21, 6, 2), 464 regulator_77802_desc_p_ldo(23, 9, 1), 465 regulator_77802_desc_p_ldo(24, 6, 1), 466 regulator_77802_desc_p_ldo(25, 9, 1), 467 regulator_77802_desc_p_ldo(26, 9, 1), 468 regulator_77802_desc_n_ldo(27, 2, 1), 469 regulator_77802_desc_p_ldo(28, 7, 1), 470 regulator_77802_desc_p_ldo(29, 7, 1), 471 regulator_77802_desc_n_ldo(30, 2, 1), 472 regulator_77802_desc_p_ldo(32, 9, 1), 473 regulator_77802_desc_p_ldo(33, 6, 1), 474 regulator_77802_desc_p_ldo(34, 9, 1), 475 regulator_77802_desc_n_ldo(35, 2, 1), 476 }; 477 478 static int max77802_pmic_probe(struct platform_device *pdev) 479 { 480 struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); 481 struct max77802_regulator_prv *max77802; 482 int i, val; 483 struct regulator_config config = { }; 484 485 max77802 = devm_kzalloc(&pdev->dev, 486 sizeof(struct max77802_regulator_prv), 487 GFP_KERNEL); 488 if (!max77802) 489 return -ENOMEM; 490 491 config.dev = iodev->dev; 492 config.regmap = iodev->regmap; 493 config.driver_data = max77802; 494 platform_set_drvdata(pdev, max77802); 495 496 for (i = 0; i < MAX77802_REG_MAX; i++) { 497 struct regulator_dev *rdev; 498 int id = regulators[i].id; 499 int shift = max77802_get_opmode_shift(id); 500 int ret; 501 502 ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val); 503 if (ret < 0) { 504 dev_warn(&pdev->dev, 505 "cannot read current mode for %d\n", i); 506 val = MAX77802_OPMODE_NORMAL; 507 } else { 508 val = val >> shift & MAX77802_OPMODE_MASK; 509 } 510 511 /* 512 * If the regulator is disabled and the system warm rebooted, 513 * the hardware reports OFF as the regulator operating mode. 514 * Default to operating mode NORMAL in that case. 515 */ 516 if (val == MAX77802_STATUS_OFF) 517 max77802->opmode[id] = MAX77802_OPMODE_NORMAL; 518 else 519 max77802->opmode[id] = val; 520 521 rdev = devm_regulator_register(&pdev->dev, 522 ®ulators[i], &config); 523 if (IS_ERR(rdev)) { 524 ret = PTR_ERR(rdev); 525 dev_err(&pdev->dev, 526 "regulator init failed for %d: %d\n", i, ret); 527 return ret; 528 } 529 } 530 531 return 0; 532 } 533 534 static const struct platform_device_id max77802_pmic_id[] = { 535 {"max77802-pmic", 0}, 536 { }, 537 }; 538 MODULE_DEVICE_TABLE(platform, max77802_pmic_id); 539 540 static struct platform_driver max77802_pmic_driver = { 541 .driver = { 542 .name = "max77802-pmic", 543 }, 544 .probe = max77802_pmic_probe, 545 .id_table = max77802_pmic_id, 546 }; 547 548 module_platform_driver(max77802_pmic_driver); 549 550 MODULE_DESCRIPTION("MAXIM 77802 Regulator Driver"); 551 MODULE_AUTHOR("Simon Glass <sjg@chromium.org>"); 552 MODULE_LICENSE("GPL"); 553