xref: /linux/drivers/spi/spi-mpc512x-psc.c (revision 9a6b55ac)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * MPC512x PSC in SPI mode driver.
4  *
5  * Copyright (C) 2007,2008 Freescale Semiconductor Inc.
6  * Original port from 52xx driver:
7  *	Hongjun Chen <hong-jun.chen@freescale.com>
8  *
9  * Fork of mpc52xx_psc_spi.c:
10  *	Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp
11  */
12 
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/errno.h>
16 #include <linux/interrupt.h>
17 #include <linux/of_address.h>
18 #include <linux/of_irq.h>
19 #include <linux/of_platform.h>
20 #include <linux/completion.h>
21 #include <linux/io.h>
22 #include <linux/delay.h>
23 #include <linux/clk.h>
24 #include <linux/spi/spi.h>
25 #include <linux/fsl_devices.h>
26 #include <linux/gpio.h>
27 #include <asm/mpc52xx_psc.h>
28 
29 enum {
30 	TYPE_MPC5121,
31 	TYPE_MPC5125,
32 };
33 
34 /*
35  * This macro abstracts the differences in the PSC register layout between
36  * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
37  */
38 #define psc_addr(mps, regname) ({					\
39 	void *__ret = NULL;						\
40 	switch (mps->type) {						\
41 	case TYPE_MPC5121: {						\
42 			struct mpc52xx_psc __iomem *psc = mps->psc;	\
43 			__ret = &psc->regname;				\
44 		};							\
45 		break;							\
46 	case TYPE_MPC5125: {						\
47 			struct mpc5125_psc __iomem *psc = mps->psc;	\
48 			__ret = &psc->regname;				\
49 		};							\
50 		break;							\
51 	}								\
52 	__ret; })
53 
54 struct mpc512x_psc_spi {
55 	void (*cs_control)(struct spi_device *spi, bool on);
56 
57 	/* driver internal data */
58 	int type;
59 	void __iomem *psc;
60 	struct mpc512x_psc_fifo __iomem *fifo;
61 	unsigned int irq;
62 	u8 bits_per_word;
63 	struct clk *clk_mclk;
64 	struct clk *clk_ipg;
65 	u32 mclk_rate;
66 
67 	struct completion txisrdone;
68 };
69 
70 /* controller state */
71 struct mpc512x_psc_spi_cs {
72 	int bits_per_word;
73 	int speed_hz;
74 };
75 
76 /* set clock freq, clock ramp, bits per work
77  * if t is NULL then reset the values to the default values
78  */
79 static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
80 					  struct spi_transfer *t)
81 {
82 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
83 
84 	cs->speed_hz = (t && t->speed_hz)
85 	    ? t->speed_hz : spi->max_speed_hz;
86 	cs->bits_per_word = (t && t->bits_per_word)
87 	    ? t->bits_per_word : spi->bits_per_word;
88 	cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
89 	return 0;
90 }
91 
92 static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
93 {
94 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
95 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
96 	u32 sicr;
97 	u32 ccr;
98 	int speed;
99 	u16 bclkdiv;
100 
101 	sicr = in_be32(psc_addr(mps, sicr));
102 
103 	/* Set clock phase and polarity */
104 	if (spi->mode & SPI_CPHA)
105 		sicr |= 0x00001000;
106 	else
107 		sicr &= ~0x00001000;
108 
109 	if (spi->mode & SPI_CPOL)
110 		sicr |= 0x00002000;
111 	else
112 		sicr &= ~0x00002000;
113 
114 	if (spi->mode & SPI_LSB_FIRST)
115 		sicr |= 0x10000000;
116 	else
117 		sicr &= ~0x10000000;
118 	out_be32(psc_addr(mps, sicr), sicr);
119 
120 	ccr = in_be32(psc_addr(mps, ccr));
121 	ccr &= 0xFF000000;
122 	speed = cs->speed_hz;
123 	if (!speed)
124 		speed = 1000000;	/* default 1MHz */
125 	bclkdiv = (mps->mclk_rate / speed) - 1;
126 
127 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
128 	out_be32(psc_addr(mps, ccr), ccr);
129 	mps->bits_per_word = cs->bits_per_word;
130 
131 	if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
132 		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
133 }
134 
135 static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
136 {
137 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
138 
139 	if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
140 		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
141 
142 }
143 
144 /* extract and scale size field in txsz or rxsz */
145 #define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
146 
147 #define EOFBYTE 1
148 
149 static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi,
150 					 struct spi_transfer *t)
151 {
152 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
153 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
154 	size_t tx_len = t->len;
155 	size_t rx_len = t->len;
156 	u8 *tx_buf = (u8 *)t->tx_buf;
157 	u8 *rx_buf = (u8 *)t->rx_buf;
158 
159 	if (!tx_buf && !rx_buf && t->len)
160 		return -EINVAL;
161 
162 	while (rx_len || tx_len) {
163 		size_t txcount;
164 		u8 data;
165 		size_t fifosz;
166 		size_t rxcount;
167 		int rxtries;
168 
169 		/*
170 		 * send the TX bytes in as large a chunk as possible
171 		 * but neither exceed the TX nor the RX FIFOs
172 		 */
173 		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz));
174 		txcount = min(fifosz, tx_len);
175 		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz));
176 		fifosz -= in_be32(&fifo->rxcnt) + 1;
177 		txcount = min(fifosz, txcount);
178 		if (txcount) {
179 
180 			/* fill the TX FIFO */
181 			while (txcount-- > 0) {
182 				data = tx_buf ? *tx_buf++ : 0;
183 				if (tx_len == EOFBYTE && t->cs_change)
184 					setbits32(&fifo->txcmd,
185 						  MPC512x_PSC_FIFO_EOF);
186 				out_8(&fifo->txdata_8, data);
187 				tx_len--;
188 			}
189 
190 			/* have the ISR trigger when the TX FIFO is empty */
191 			reinit_completion(&mps->txisrdone);
192 			out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
193 			out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY);
194 			wait_for_completion(&mps->txisrdone);
195 		}
196 
197 		/*
198 		 * consume as much RX data as the FIFO holds, while we
199 		 * iterate over the transfer's TX data length
200 		 *
201 		 * only insist in draining all the remaining RX bytes
202 		 * when the TX bytes were exhausted (that's at the very
203 		 * end of this transfer, not when still iterating over
204 		 * the transfer's chunks)
205 		 */
206 		rxtries = 50;
207 		do {
208 
209 			/*
210 			 * grab whatever was in the FIFO when we started
211 			 * looking, don't bother fetching what was added to
212 			 * the FIFO while we read from it -- we'll return
213 			 * here eventually and prefer sending out remaining
214 			 * TX data
215 			 */
216 			fifosz = in_be32(&fifo->rxcnt);
217 			rxcount = min(fifosz, rx_len);
218 			while (rxcount-- > 0) {
219 				data = in_8(&fifo->rxdata_8);
220 				if (rx_buf)
221 					*rx_buf++ = data;
222 				rx_len--;
223 			}
224 
225 			/*
226 			 * come back later if there still is TX data to send,
227 			 * bail out of the RX drain loop if all of the TX data
228 			 * was sent and all of the RX data was received (i.e.
229 			 * when the transmission has completed)
230 			 */
231 			if (tx_len)
232 				break;
233 			if (!rx_len)
234 				break;
235 
236 			/*
237 			 * TX data transmission has completed while RX data
238 			 * is still pending -- that's a transient situation
239 			 * which depends on wire speed and specific
240 			 * hardware implementation details (buffering) yet
241 			 * should resolve very quickly
242 			 *
243 			 * just yield for a moment to not hog the CPU for
244 			 * too long when running SPI at low speed
245 			 *
246 			 * the timeout range is rather arbitrary and tries
247 			 * to balance throughput against system load; the
248 			 * chosen values result in a minimal timeout of 50
249 			 * times 10us and thus work at speeds as low as
250 			 * some 20kbps, while the maximum timeout at the
251 			 * transfer's end could be 5ms _if_ nothing else
252 			 * ticks in the system _and_ RX data still wasn't
253 			 * received, which only occurs in situations that
254 			 * are exceptional; removing the unpredictability
255 			 * of the timeout either decreases throughput
256 			 * (longer timeouts), or puts more load on the
257 			 * system (fixed short timeouts) or requires the
258 			 * use of a timeout API instead of a counter and an
259 			 * unknown inner delay
260 			 */
261 			usleep_range(10, 100);
262 
263 		} while (--rxtries > 0);
264 		if (!tx_len && rx_len && !rxtries) {
265 			/*
266 			 * not enough RX bytes even after several retries
267 			 * and the resulting rather long timeout?
268 			 */
269 			rxcount = in_be32(&fifo->rxcnt);
270 			dev_warn(&spi->dev,
271 				 "short xfer, missing %zd RX bytes, FIFO level %zd\n",
272 				 rx_len, rxcount);
273 		}
274 
275 		/*
276 		 * drain and drop RX data which "should not be there" in
277 		 * the first place, for undisturbed transmission this turns
278 		 * into a NOP (except for the FIFO level fetch)
279 		 */
280 		if (!tx_len && !rx_len) {
281 			while (in_be32(&fifo->rxcnt))
282 				in_8(&fifo->rxdata_8);
283 		}
284 
285 	}
286 	return 0;
287 }
288 
289 static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
290 				    struct spi_message *m)
291 {
292 	struct spi_device *spi;
293 	unsigned cs_change;
294 	int status;
295 	struct spi_transfer *t;
296 
297 	spi = m->spi;
298 	cs_change = 1;
299 	status = 0;
300 	list_for_each_entry(t, &m->transfers, transfer_list) {
301 		status = mpc512x_psc_spi_transfer_setup(spi, t);
302 		if (status < 0)
303 			break;
304 
305 		if (cs_change)
306 			mpc512x_psc_spi_activate_cs(spi);
307 		cs_change = t->cs_change;
308 
309 		status = mpc512x_psc_spi_transfer_rxtx(spi, t);
310 		if (status)
311 			break;
312 		m->actual_length += t->len;
313 
314 		spi_transfer_delay_exec(t);
315 
316 		if (cs_change)
317 			mpc512x_psc_spi_deactivate_cs(spi);
318 	}
319 
320 	m->status = status;
321 	if (m->complete)
322 		m->complete(m->context);
323 
324 	if (status || !cs_change)
325 		mpc512x_psc_spi_deactivate_cs(spi);
326 
327 	mpc512x_psc_spi_transfer_setup(spi, NULL);
328 
329 	spi_finalize_current_message(master);
330 	return status;
331 }
332 
333 static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
334 {
335 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
336 
337 	dev_dbg(&master->dev, "%s()\n", __func__);
338 
339 	/* Zero MR2 */
340 	in_8(psc_addr(mps, mr2));
341 	out_8(psc_addr(mps, mr2), 0x0);
342 
343 	/* enable transmitter/receiver */
344 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
345 
346 	return 0;
347 }
348 
349 static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master)
350 {
351 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
352 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
353 
354 	dev_dbg(&master->dev, "%s()\n", __func__);
355 
356 	/* disable transmitter/receiver and fifo interrupt */
357 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
358 	out_be32(&fifo->tximr, 0);
359 
360 	return 0;
361 }
362 
363 static int mpc512x_psc_spi_setup(struct spi_device *spi)
364 {
365 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
366 	int ret;
367 
368 	if (spi->bits_per_word % 8)
369 		return -EINVAL;
370 
371 	if (!cs) {
372 		cs = kzalloc(sizeof *cs, GFP_KERNEL);
373 		if (!cs)
374 			return -ENOMEM;
375 
376 		if (gpio_is_valid(spi->cs_gpio)) {
377 			ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
378 			if (ret) {
379 				dev_err(&spi->dev, "can't get CS gpio: %d\n",
380 					ret);
381 				kfree(cs);
382 				return ret;
383 			}
384 			gpio_direction_output(spi->cs_gpio,
385 					spi->mode & SPI_CS_HIGH ? 0 : 1);
386 		}
387 
388 		spi->controller_state = cs;
389 	}
390 
391 	cs->bits_per_word = spi->bits_per_word;
392 	cs->speed_hz = spi->max_speed_hz;
393 
394 	return 0;
395 }
396 
397 static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
398 {
399 	if (gpio_is_valid(spi->cs_gpio))
400 		gpio_free(spi->cs_gpio);
401 	kfree(spi->controller_state);
402 }
403 
404 static int mpc512x_psc_spi_port_config(struct spi_master *master,
405 				       struct mpc512x_psc_spi *mps)
406 {
407 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
408 	u32 sicr;
409 	u32 ccr;
410 	int speed;
411 	u16 bclkdiv;
412 
413 	/* Reset the PSC into a known state */
414 	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
415 	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
416 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
417 
418 	/* Disable psc interrupts all useful interrupts are in fifo */
419 	out_be16(psc_addr(mps, isr_imr.imr), 0);
420 
421 	/* Disable fifo interrupts, will be enabled later */
422 	out_be32(&fifo->tximr, 0);
423 	out_be32(&fifo->rximr, 0);
424 
425 	/* Setup fifo slice address and size */
426 	/*out_be32(&fifo->txsz, 0x0fe00004);*/
427 	/*out_be32(&fifo->rxsz, 0x0ff00004);*/
428 
429 	sicr =	0x01000000 |	/* SIM = 0001 -- 8 bit */
430 		0x00800000 |	/* GenClk = 1 -- internal clk */
431 		0x00008000 |	/* SPI = 1 */
432 		0x00004000 |	/* MSTR = 1   -- SPI master */
433 		0x00000800;	/* UseEOF = 1 -- SS low until EOF */
434 
435 	out_be32(psc_addr(mps, sicr), sicr);
436 
437 	ccr = in_be32(psc_addr(mps, ccr));
438 	ccr &= 0xFF000000;
439 	speed = 1000000;	/* default 1MHz */
440 	bclkdiv = (mps->mclk_rate / speed) - 1;
441 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
442 	out_be32(psc_addr(mps, ccr), ccr);
443 
444 	/* Set 2ms DTL delay */
445 	out_8(psc_addr(mps, ctur), 0x00);
446 	out_8(psc_addr(mps, ctlr), 0x82);
447 
448 	/* we don't use the alarms */
449 	out_be32(&fifo->rxalarm, 0xfff);
450 	out_be32(&fifo->txalarm, 0);
451 
452 	/* Enable FIFO slices for Rx/Tx */
453 	out_be32(&fifo->rxcmd,
454 		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
455 	out_be32(&fifo->txcmd,
456 		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
457 
458 	mps->bits_per_word = 8;
459 
460 	return 0;
461 }
462 
463 static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
464 {
465 	struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id;
466 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
467 
468 	/* clear interrupt and wake up the rx/tx routine */
469 	if (in_be32(&fifo->txisr) &
470 	    in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) {
471 		out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
472 		out_be32(&fifo->tximr, 0);
473 		complete(&mps->txisrdone);
474 		return IRQ_HANDLED;
475 	}
476 	return IRQ_NONE;
477 }
478 
479 static void mpc512x_spi_cs_control(struct spi_device *spi, bool onoff)
480 {
481 	gpio_set_value(spi->cs_gpio, onoff);
482 }
483 
484 static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
485 					      u32 size, unsigned int irq)
486 {
487 	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
488 	struct mpc512x_psc_spi *mps;
489 	struct spi_master *master;
490 	int ret;
491 	void *tempp;
492 	struct clk *clk;
493 
494 	master = spi_alloc_master(dev, sizeof *mps);
495 	if (master == NULL)
496 		return -ENOMEM;
497 
498 	dev_set_drvdata(dev, master);
499 	mps = spi_master_get_devdata(master);
500 	mps->type = (int)of_device_get_match_data(dev);
501 	mps->irq = irq;
502 
503 	if (pdata == NULL) {
504 		mps->cs_control = mpc512x_spi_cs_control;
505 	} else {
506 		mps->cs_control = pdata->cs_control;
507 		master->bus_num = pdata->bus_num;
508 		master->num_chipselect = pdata->max_chipselect;
509 	}
510 
511 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
512 	master->setup = mpc512x_psc_spi_setup;
513 	master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
514 	master->transfer_one_message = mpc512x_psc_spi_msg_xfer;
515 	master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
516 	master->cleanup = mpc512x_psc_spi_cleanup;
517 	master->dev.of_node = dev->of_node;
518 
519 	tempp = devm_ioremap(dev, regaddr, size);
520 	if (!tempp) {
521 		dev_err(dev, "could not ioremap I/O port range\n");
522 		ret = -EFAULT;
523 		goto free_master;
524 	}
525 	mps->psc = tempp;
526 	mps->fifo =
527 		(struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc));
528 	ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED,
529 				"mpc512x-psc-spi", mps);
530 	if (ret)
531 		goto free_master;
532 	init_completion(&mps->txisrdone);
533 
534 	clk = devm_clk_get(dev, "mclk");
535 	if (IS_ERR(clk)) {
536 		ret = PTR_ERR(clk);
537 		goto free_master;
538 	}
539 	ret = clk_prepare_enable(clk);
540 	if (ret)
541 		goto free_master;
542 	mps->clk_mclk = clk;
543 	mps->mclk_rate = clk_get_rate(clk);
544 
545 	clk = devm_clk_get(dev, "ipg");
546 	if (IS_ERR(clk)) {
547 		ret = PTR_ERR(clk);
548 		goto free_mclk_clock;
549 	}
550 	ret = clk_prepare_enable(clk);
551 	if (ret)
552 		goto free_mclk_clock;
553 	mps->clk_ipg = clk;
554 
555 	ret = mpc512x_psc_spi_port_config(master, mps);
556 	if (ret < 0)
557 		goto free_ipg_clock;
558 
559 	ret = devm_spi_register_master(dev, master);
560 	if (ret < 0)
561 		goto free_ipg_clock;
562 
563 	return ret;
564 
565 free_ipg_clock:
566 	clk_disable_unprepare(mps->clk_ipg);
567 free_mclk_clock:
568 	clk_disable_unprepare(mps->clk_mclk);
569 free_master:
570 	spi_master_put(master);
571 
572 	return ret;
573 }
574 
575 static int mpc512x_psc_spi_do_remove(struct device *dev)
576 {
577 	struct spi_master *master = dev_get_drvdata(dev);
578 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
579 
580 	clk_disable_unprepare(mps->clk_mclk);
581 	clk_disable_unprepare(mps->clk_ipg);
582 
583 	return 0;
584 }
585 
586 static int mpc512x_psc_spi_of_probe(struct platform_device *op)
587 {
588 	const u32 *regaddr_p;
589 	u64 regaddr64, size64;
590 
591 	regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
592 	if (!regaddr_p) {
593 		dev_err(&op->dev, "Invalid PSC address\n");
594 		return -EINVAL;
595 	}
596 	regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
597 
598 	return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
599 				irq_of_parse_and_map(op->dev.of_node, 0));
600 }
601 
602 static int mpc512x_psc_spi_of_remove(struct platform_device *op)
603 {
604 	return mpc512x_psc_spi_do_remove(&op->dev);
605 }
606 
607 static const struct of_device_id mpc512x_psc_spi_of_match[] = {
608 	{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
609 	{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
610 	{},
611 };
612 
613 MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
614 
615 static struct platform_driver mpc512x_psc_spi_of_driver = {
616 	.probe = mpc512x_psc_spi_of_probe,
617 	.remove = mpc512x_psc_spi_of_remove,
618 	.driver = {
619 		.name = "mpc512x-psc-spi",
620 		.of_match_table = mpc512x_psc_spi_of_match,
621 	},
622 };
623 module_platform_driver(mpc512x_psc_spi_of_driver);
624 
625 MODULE_AUTHOR("John Rigby");
626 MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
627 MODULE_LICENSE("GPL");
628