1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef OLPC_DCON_H_ 3 #define OLPC_DCON_H_ 4 5 #include <linux/notifier.h> 6 #include <linux/workqueue.h> 7 8 /* DCON registers */ 9 10 #define DCON_REG_ID 0 11 #define DCON_REG_MODE 1 12 13 #define MODE_PASSTHRU BIT(0) 14 #define MODE_SLEEP BIT(1) 15 #define MODE_SLEEP_AUTO BIT(2) 16 #define MODE_BL_ENABLE BIT(3) 17 #define MODE_BLANK BIT(4) 18 #define MODE_CSWIZZLE BIT(5) 19 #define MODE_COL_AA BIT(6) 20 #define MODE_MONO_LUMA BIT(7) 21 #define MODE_SCAN_INT BIT(8) 22 #define MODE_CLOCKDIV BIT(9) 23 #define MODE_DEBUG BIT(14) 24 #define MODE_SELFTEST BIT(15) 25 26 #define DCON_REG_HRES 0x2 27 #define DCON_REG_HTOTAL 0x3 28 #define DCON_REG_HSYNC_WIDTH 0x4 29 #define DCON_REG_VRES 0x5 30 #define DCON_REG_VTOTAL 0x6 31 #define DCON_REG_VSYNC_WIDTH 0x7 32 #define DCON_REG_TIMEOUT 0x8 33 #define DCON_REG_SCAN_INT 0x9 34 #define DCON_REG_BRIGHT 0xa 35 #define DCON_REG_MEM_OPT_A 0x41 36 #define DCON_REG_MEM_OPT_B 0x42 37 38 /* Load Delay Locked Loop (DLL) settings for clock delay */ 39 #define MEM_DLL_CLOCK_DELAY BIT(0) 40 /* Memory controller power down function */ 41 #define MEM_POWER_DOWN BIT(8) 42 /* Memory controller software reset */ 43 #define MEM_SOFT_RESET BIT(0) 44 45 /* Status values */ 46 47 #define DCONSTAT_SCANINT 0 48 #define DCONSTAT_SCANINT_DCON 1 49 #define DCONSTAT_DISPLAYLOAD 2 50 #define DCONSTAT_MISSED 3 51 52 /* Source values */ 53 54 #define DCON_SOURCE_DCON 0 55 #define DCON_SOURCE_CPU 1 56 57 /* Interrupt */ 58 #define DCON_IRQ 6 59 60 struct dcon_priv { 61 struct i2c_client *client; 62 struct fb_info *fbinfo; 63 struct backlight_device *bl_dev; 64 65 wait_queue_head_t waitq; 66 struct work_struct switch_source; 67 struct notifier_block reboot_nb; 68 69 /* Shadow register for the DCON_REG_MODE register */ 70 u8 disp_mode; 71 72 /* The current backlight value - this saves us some smbus traffic */ 73 u8 bl_val; 74 75 /* Current source, initialized at probe time */ 76 int curr_src; 77 78 /* Desired source */ 79 int pending_src; 80 81 /* Variables used during switches */ 82 bool switched; 83 ktime_t irq_time; 84 ktime_t load_time; 85 86 /* Current output type; true == mono, false == color */ 87 bool mono; 88 bool asleep; 89 /* This get set while controlling fb blank state from the driver */ 90 bool ignore_fb_events; 91 }; 92 93 struct dcon_platform_data { 94 int (*init)(struct dcon_priv *dcon); 95 void (*bus_stabilize_wiggle)(void); 96 void (*set_dconload)(int load); 97 int (*read_status)(u8 *status); 98 }; 99 100 struct dcon_gpio { 101 const char *name; 102 unsigned long flags; 103 }; 104 105 #include <linux/interrupt.h> 106 107 irqreturn_t dcon_interrupt(int irq, void *id); 108 109 extern struct dcon_platform_data dcon_pdata_xo_1; 110 extern struct dcon_platform_data dcon_pdata_xo_1_5; 111 112 #endif 113