1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /****************************************************************************** 3 * 4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. 5 * 6 ******************************************************************************/ 7 #ifndef __RTW_EEPROM_H__ 8 #define __RTW_EEPROM_H__ 9 10 11 #define RTL8712_EEPROM_ID 0x8712 12 /* define EEPROM_MAX_SIZE 256 */ 13 14 #define HWSET_MAX_SIZE_128 128 15 #define HWSET_MAX_SIZE_256 256 16 #define HWSET_MAX_SIZE_512 512 17 18 #define EEPROM_MAX_SIZE HWSET_MAX_SIZE_512 19 20 #define CLOCK_RATE 50 /* 100us */ 21 22 /* EEPROM opcodes */ 23 #define EEPROM_READ_OPCODE 06 24 #define EEPROM_WRITE_OPCODE 05 25 #define EEPROM_ERASE_OPCODE 07 26 #define EEPROM_EWEN_OPCODE 19 /* Erase/write enable */ 27 #define EEPROM_EWDS_OPCODE 16 /* Erase/write disable */ 28 29 /* Country codes */ 30 #define USA 0x555320 31 #define EUROPE 0x1 /* temp, should be provided later */ 32 #define JAPAN 0x2 /* temp, should be provided later */ 33 34 #define eeprom_cis0_sz 17 35 #define eeprom_cis1_sz 50 36 37 /* */ 38 /* Customer ID, note that: */ 39 /* This variable is initiailzed through EEPROM or registry, */ 40 /* however, its definition may be different with that in EEPROM for */ 41 /* EEPROM size consideration. So, we have to perform proper translation between them. */ 42 /* Besides, CustomerID of registry has precedence of that of EEPROM. */ 43 /* defined below. 060703, by rcnjko. */ 44 /* */ 45 typedef enum _RT_CUSTOMER_ID 46 { 47 RT_CID_DEFAULT = 0, 48 RT_CID_8187_ALPHA0 = 1, 49 RT_CID_8187_SERCOMM_PS = 2, 50 RT_CID_8187_HW_LED = 3, 51 RT_CID_8187_NETGEAR = 4, 52 RT_CID_WHQL = 5, 53 RT_CID_819x_CAMEO = 6, 54 RT_CID_819x_RUNTOP = 7, 55 RT_CID_819x_Senao = 8, 56 RT_CID_TOSHIBA = 9, /* Merge by Jacken, 2008/01/31. */ 57 RT_CID_819x_Netcore = 10, 58 RT_CID_Nettronix = 11, 59 RT_CID_DLINK = 12, 60 RT_CID_PRONET = 13, 61 RT_CID_COREGA = 14, 62 RT_CID_CHINA_MOBILE = 15, 63 RT_CID_819x_ALPHA = 16, 64 RT_CID_819x_Sitecom = 17, 65 RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17. */ 66 RT_CID_819x_Lenovo = 19, 67 RT_CID_819x_QMI = 20, 68 RT_CID_819x_Edimax_Belkin = 21, 69 RT_CID_819x_Sercomm_Belkin = 22, 70 RT_CID_819x_CAMEO1 = 23, 71 RT_CID_819x_MSI = 24, 72 RT_CID_819x_Acer = 25, 73 RT_CID_819x_AzWave_ASUS = 26, 74 RT_CID_819x_AzWave = 27, /* For AzWave in PCIe, The ID is AzWave use and not only Asus */ 75 RT_CID_819x_HP = 28, 76 RT_CID_819x_WNC_COREGA = 29, 77 RT_CID_819x_Arcadyan_Belkin = 30, 78 RT_CID_819x_SAMSUNG = 31, 79 RT_CID_819x_CLEVO = 32, 80 RT_CID_819x_DELL = 33, 81 RT_CID_819x_PRONETS = 34, 82 RT_CID_819x_Edimax_ASUS = 35, 83 RT_CID_NETGEAR = 36, 84 RT_CID_PLANEX = 37, 85 RT_CID_CC_C = 38, 86 RT_CID_819x_Xavi = 39, 87 RT_CID_LENOVO_CHINA = 40, 88 RT_CID_INTEL_CHINA = 41, 89 RT_CID_TPLINK_HPWR = 42, 90 RT_CID_819x_Sercomm_Netgear = 43, 91 RT_CID_819x_ALPHA_Dlink = 44,/* add by ylb 20121012 for customer led for alpha */ 92 RT_CID_WNC_NEC = 45,/* add by page for NEC */ 93 RT_CID_DNI_BUFFALO = 46,/* add by page for NEC */ 94 }RT_CUSTOMER_ID, *PRT_CUSTOMER_ID; 95 96 struct eeprom_priv 97 { 98 u8 bautoload_fail_flag; 99 u8 bloadfile_fail_flag; 100 u8 bloadmac_fail_flag; 101 u8 EepromOrEfuse; 102 103 u8 mac_addr[6]; /* PermanentAddress */ 104 105 u16 channel_plan; 106 u16 CustomerID; 107 108 u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */ 109 u8 adjuseVoltageVal; 110 111 u8 EEPROMRFGainOffset; 112 u8 EEPROMRFGainVal; 113 114 u8 sdio_setting; 115 u32 ocr; 116 u8 cis0[eeprom_cis0_sz]; 117 u8 cis1[eeprom_cis1_sz]; 118 }; 119 120 #endif /* __RTL871X_EEPROM_H__ */ 121