xref: /linux/drivers/usb/host/xhci-plat.c (revision d642ef71)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4  *
5  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
6  * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7  *
8  * A lot of code borrowed from the Linux xHCI driver.
9  */
10 
11 #include <linux/clk.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/usb/phy.h>
19 #include <linux/slab.h>
20 #include <linux/acpi.h>
21 #include <linux/usb/of.h>
22 #include <linux/reset.h>
23 
24 #include "xhci.h"
25 #include "xhci-plat.h"
26 #include "xhci-mvebu.h"
27 
28 static struct hc_driver __read_mostly xhci_plat_hc_driver;
29 
30 static int xhci_plat_setup(struct usb_hcd *hcd);
31 static int xhci_plat_start(struct usb_hcd *hcd);
32 
33 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
34 	.extra_priv_size = sizeof(struct xhci_plat_priv),
35 	.reset = xhci_plat_setup,
36 	.start = xhci_plat_start,
37 };
38 
39 static void xhci_priv_plat_start(struct usb_hcd *hcd)
40 {
41 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
42 
43 	if (priv->plat_start)
44 		priv->plat_start(hcd);
45 }
46 
47 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
48 {
49 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
50 
51 	if (!priv->init_quirk)
52 		return 0;
53 
54 	return priv->init_quirk(hcd);
55 }
56 
57 static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
58 {
59 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
60 
61 	if (!priv->suspend_quirk)
62 		return 0;
63 
64 	return priv->suspend_quirk(hcd);
65 }
66 
67 static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
68 {
69 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
70 
71 	if (!priv->resume_quirk)
72 		return 0;
73 
74 	return priv->resume_quirk(hcd);
75 }
76 
77 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
78 {
79 	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
80 
81 	xhci->quirks |= priv->quirks;
82 }
83 
84 /* called during probe() after chip reset completes */
85 static int xhci_plat_setup(struct usb_hcd *hcd)
86 {
87 	int ret;
88 
89 
90 	ret = xhci_priv_init_quirk(hcd);
91 	if (ret)
92 		return ret;
93 
94 	return xhci_gen_setup(hcd, xhci_plat_quirks);
95 }
96 
97 static int xhci_plat_start(struct usb_hcd *hcd)
98 {
99 	xhci_priv_plat_start(hcd);
100 	return xhci_run(hcd);
101 }
102 
103 #ifdef CONFIG_OF
104 static const struct xhci_plat_priv xhci_plat_marvell_armada = {
105 	.init_quirk = xhci_mvebu_mbus_init_quirk,
106 };
107 
108 static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
109 	.init_quirk = xhci_mvebu_a3700_init_quirk,
110 };
111 
112 static const struct xhci_plat_priv xhci_plat_brcm = {
113 	.quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS,
114 };
115 
116 static const struct of_device_id usb_xhci_of_match[] = {
117 	{
118 		.compatible = "generic-xhci",
119 	}, {
120 		.compatible = "xhci-platform",
121 	}, {
122 		.compatible = "marvell,armada-375-xhci",
123 		.data = &xhci_plat_marvell_armada,
124 	}, {
125 		.compatible = "marvell,armada-380-xhci",
126 		.data = &xhci_plat_marvell_armada,
127 	}, {
128 		.compatible = "marvell,armada3700-xhci",
129 		.data = &xhci_plat_marvell_armada3700,
130 	}, {
131 		.compatible = "brcm,xhci-brcm-v2",
132 		.data = &xhci_plat_brcm,
133 	}, {
134 		.compatible = "brcm,bcm7445-xhci",
135 		.data = &xhci_plat_brcm,
136 	},
137 	{},
138 };
139 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
140 #endif
141 
142 int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const struct xhci_plat_priv *priv_match)
143 {
144 	const struct hc_driver	*driver;
145 	struct device		*tmpdev;
146 	struct xhci_hcd		*xhci;
147 	struct resource         *res;
148 	struct usb_hcd		*hcd, *usb3_hcd;
149 	int			ret;
150 	int			irq;
151 	struct xhci_plat_priv	*priv = NULL;
152 	bool			of_match;
153 
154 	if (usb_disabled())
155 		return -ENODEV;
156 
157 	driver = &xhci_plat_hc_driver;
158 
159 	irq = platform_get_irq(pdev, 0);
160 	if (irq < 0)
161 		return irq;
162 
163 	if (!sysdev)
164 		sysdev = &pdev->dev;
165 
166 	ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
167 	if (ret)
168 		return ret;
169 
170 	pm_runtime_set_active(&pdev->dev);
171 	pm_runtime_enable(&pdev->dev);
172 	pm_runtime_get_noresume(&pdev->dev);
173 
174 	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
175 			       dev_name(&pdev->dev), NULL);
176 	if (!hcd) {
177 		ret = -ENOMEM;
178 		goto disable_runtime;
179 	}
180 
181 	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
182 	if (IS_ERR(hcd->regs)) {
183 		ret = PTR_ERR(hcd->regs);
184 		goto put_hcd;
185 	}
186 
187 	hcd->rsrc_start = res->start;
188 	hcd->rsrc_len = resource_size(res);
189 
190 	xhci = hcd_to_xhci(hcd);
191 
192 	xhci->allow_single_roothub = 1;
193 
194 	/*
195 	 * Not all platforms have clks so it is not an error if the
196 	 * clock do not exist.
197 	 */
198 	xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
199 	if (IS_ERR(xhci->reg_clk)) {
200 		ret = PTR_ERR(xhci->reg_clk);
201 		goto put_hcd;
202 	}
203 
204 	xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
205 	if (IS_ERR(xhci->clk)) {
206 		ret = PTR_ERR(xhci->clk);
207 		goto put_hcd;
208 	}
209 
210 	xhci->reset = devm_reset_control_array_get_optional_shared(&pdev->dev);
211 	if (IS_ERR(xhci->reset)) {
212 		ret = PTR_ERR(xhci->reset);
213 		goto put_hcd;
214 	}
215 
216 	ret = reset_control_deassert(xhci->reset);
217 	if (ret)
218 		goto put_hcd;
219 
220 	ret = clk_prepare_enable(xhci->reg_clk);
221 	if (ret)
222 		goto err_reset;
223 
224 	ret = clk_prepare_enable(xhci->clk);
225 	if (ret)
226 		goto disable_reg_clk;
227 
228 	if (priv_match) {
229 		priv = hcd_to_xhci_priv(hcd);
230 		/* Just copy data for now */
231 		*priv = *priv_match;
232 	}
233 
234 	device_set_wakeup_capable(&pdev->dev, true);
235 
236 	xhci->main_hcd = hcd;
237 
238 	/* imod_interval is the interrupt moderation value in nanoseconds. */
239 	xhci->imod_interval = 40000;
240 
241 	/* Iterate over all parent nodes for finding quirks */
242 	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
243 
244 		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
245 			xhci->quirks |= XHCI_HW_LPM_DISABLE;
246 
247 		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
248 			xhci->quirks |= XHCI_LPM_SUPPORT;
249 
250 		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
251 			xhci->quirks |= XHCI_BROKEN_PORT_PED;
252 
253 		device_property_read_u32(tmpdev, "imod-interval-ns",
254 					 &xhci->imod_interval);
255 	}
256 
257 	/*
258 	 * Drivers such as dwc3 manages PHYs themself (and rely on driver name
259 	 * matching for the xhci platform device).
260 	 */
261 	of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
262 	if (of_match) {
263 		hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
264 		if (IS_ERR(hcd->usb_phy)) {
265 			ret = PTR_ERR(hcd->usb_phy);
266 			if (ret == -EPROBE_DEFER)
267 				goto disable_clk;
268 			hcd->usb_phy = NULL;
269 		} else {
270 			ret = usb_phy_init(hcd->usb_phy);
271 			if (ret)
272 				goto disable_clk;
273 		}
274 	}
275 
276 	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
277 
278 	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
279 		hcd->skip_phy_initialization = 1;
280 
281 	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
282 		xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
283 
284 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
285 	if (ret)
286 		goto disable_usb_phy;
287 
288 	if (!xhci_has_one_roothub(xhci)) {
289 		xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
290 						    dev_name(&pdev->dev), hcd);
291 		if (!xhci->shared_hcd) {
292 			ret = -ENOMEM;
293 			goto dealloc_usb2_hcd;
294 		}
295 
296 		if (of_match) {
297 			xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev,
298 										"usb-phy", 1);
299 			if (IS_ERR(xhci->shared_hcd->usb_phy)) {
300 				xhci->shared_hcd->usb_phy = NULL;
301 			} else {
302 				ret = usb_phy_init(xhci->shared_hcd->usb_phy);
303 				if (ret)
304 					dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n",
305 						__func__, ret);
306 			}
307 		}
308 
309 		xhci->shared_hcd->tpl_support = hcd->tpl_support;
310 	}
311 
312 	usb3_hcd = xhci_get_usb3_hcd(xhci);
313 	if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4)
314 		usb3_hcd->can_do_streams = 1;
315 
316 	if (xhci->shared_hcd) {
317 		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
318 		if (ret)
319 			goto put_usb3_hcd;
320 	}
321 
322 	device_enable_async_suspend(&pdev->dev);
323 	pm_runtime_put_noidle(&pdev->dev);
324 
325 	/*
326 	 * Prevent runtime pm from being on as default, users should enable
327 	 * runtime pm using power/control in sysfs.
328 	 */
329 	pm_runtime_forbid(&pdev->dev);
330 
331 	return 0;
332 
333 
334 put_usb3_hcd:
335 	usb_put_hcd(xhci->shared_hcd);
336 
337 dealloc_usb2_hcd:
338 	usb_remove_hcd(hcd);
339 
340 disable_usb_phy:
341 	usb_phy_shutdown(hcd->usb_phy);
342 
343 disable_clk:
344 	clk_disable_unprepare(xhci->clk);
345 
346 disable_reg_clk:
347 	clk_disable_unprepare(xhci->reg_clk);
348 
349 err_reset:
350 	reset_control_assert(xhci->reset);
351 
352 put_hcd:
353 	usb_put_hcd(hcd);
354 
355 disable_runtime:
356 	pm_runtime_put_noidle(&pdev->dev);
357 	pm_runtime_disable(&pdev->dev);
358 
359 	return ret;
360 }
361 EXPORT_SYMBOL_GPL(xhci_plat_probe);
362 
363 static int xhci_generic_plat_probe(struct platform_device *pdev)
364 {
365 	const struct xhci_plat_priv *priv_match;
366 	struct device *sysdev;
367 	int ret;
368 
369 	/*
370 	 * sysdev must point to a device that is known to the system firmware
371 	 * or PCI hardware. We handle these three cases here:
372 	 * 1. xhci_plat comes from firmware
373 	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
374 	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
375 	 */
376 	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
377 		if (is_of_node(sysdev->fwnode) ||
378 			is_acpi_device_node(sysdev->fwnode))
379 			break;
380 		else if (dev_is_pci(sysdev))
381 			break;
382 	}
383 
384 	if (!sysdev)
385 		sysdev = &pdev->dev;
386 
387 	if (WARN_ON(!sysdev->dma_mask)) {
388 		/* Platform did not initialize dma_mask */
389 		ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
390 		if (ret)
391 			return ret;
392 	}
393 
394 	if (pdev->dev.of_node)
395 		priv_match = of_device_get_match_data(&pdev->dev);
396 	else
397 		priv_match = dev_get_platdata(&pdev->dev);
398 
399 	return xhci_plat_probe(pdev, sysdev, priv_match);
400 }
401 
402 void xhci_plat_remove(struct platform_device *dev)
403 {
404 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
405 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
406 	struct clk *clk = xhci->clk;
407 	struct clk *reg_clk = xhci->reg_clk;
408 	struct usb_hcd *shared_hcd = xhci->shared_hcd;
409 
410 	xhci->xhc_state |= XHCI_STATE_REMOVING;
411 	pm_runtime_get_sync(&dev->dev);
412 
413 	if (shared_hcd) {
414 		usb_remove_hcd(shared_hcd);
415 		xhci->shared_hcd = NULL;
416 	}
417 
418 	usb_phy_shutdown(hcd->usb_phy);
419 
420 	usb_remove_hcd(hcd);
421 
422 	if (shared_hcd)
423 		usb_put_hcd(shared_hcd);
424 
425 	clk_disable_unprepare(clk);
426 	clk_disable_unprepare(reg_clk);
427 	reset_control_assert(xhci->reset);
428 	usb_put_hcd(hcd);
429 
430 	pm_runtime_disable(&dev->dev);
431 	pm_runtime_put_noidle(&dev->dev);
432 	pm_runtime_set_suspended(&dev->dev);
433 }
434 EXPORT_SYMBOL_GPL(xhci_plat_remove);
435 
436 static int __maybe_unused xhci_plat_suspend(struct device *dev)
437 {
438 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
439 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
440 	int ret;
441 
442 	if (pm_runtime_suspended(dev))
443 		pm_runtime_resume(dev);
444 
445 	ret = xhci_priv_suspend_quirk(hcd);
446 	if (ret)
447 		return ret;
448 	/*
449 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
450 	 * to do wakeup during suspend.
451 	 */
452 	ret = xhci_suspend(xhci, device_may_wakeup(dev));
453 	if (ret)
454 		return ret;
455 
456 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
457 		clk_disable_unprepare(xhci->clk);
458 		clk_disable_unprepare(xhci->reg_clk);
459 	}
460 
461 	return 0;
462 }
463 
464 static int __maybe_unused xhci_plat_resume(struct device *dev)
465 {
466 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
467 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
468 	int ret;
469 
470 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
471 		ret = clk_prepare_enable(xhci->clk);
472 		if (ret)
473 			return ret;
474 
475 		ret = clk_prepare_enable(xhci->reg_clk);
476 		if (ret) {
477 			clk_disable_unprepare(xhci->clk);
478 			return ret;
479 		}
480 	}
481 
482 	ret = xhci_priv_resume_quirk(hcd);
483 	if (ret)
484 		goto disable_clks;
485 
486 	ret = xhci_resume(xhci, PMSG_RESUME);
487 	if (ret)
488 		goto disable_clks;
489 
490 	pm_runtime_disable(dev);
491 	pm_runtime_set_active(dev);
492 	pm_runtime_enable(dev);
493 
494 	return 0;
495 
496 disable_clks:
497 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
498 		clk_disable_unprepare(xhci->clk);
499 		clk_disable_unprepare(xhci->reg_clk);
500 	}
501 
502 	return ret;
503 }
504 
505 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
506 {
507 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
508 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
509 	int ret;
510 
511 	ret = xhci_priv_suspend_quirk(hcd);
512 	if (ret)
513 		return ret;
514 
515 	return xhci_suspend(xhci, true);
516 }
517 
518 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
519 {
520 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
521 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
522 
523 	return xhci_resume(xhci, PMSG_AUTO_RESUME);
524 }
525 
526 const struct dev_pm_ops xhci_plat_pm_ops = {
527 	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
528 
529 	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
530 			   xhci_plat_runtime_resume,
531 			   NULL)
532 };
533 EXPORT_SYMBOL_GPL(xhci_plat_pm_ops);
534 
535 #ifdef CONFIG_ACPI
536 static const struct acpi_device_id usb_xhci_acpi_match[] = {
537 	/* XHCI-compliant USB Controller */
538 	{ "PNP0D10", },
539 	{ }
540 };
541 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
542 #endif
543 
544 static struct platform_driver usb_generic_xhci_driver = {
545 	.probe	= xhci_generic_plat_probe,
546 	.remove_new = xhci_plat_remove,
547 	.shutdown = usb_hcd_platform_shutdown,
548 	.driver	= {
549 		.name = "xhci-hcd",
550 		.pm = &xhci_plat_pm_ops,
551 		.of_match_table = of_match_ptr(usb_xhci_of_match),
552 		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
553 	},
554 };
555 MODULE_ALIAS("platform:xhci-hcd");
556 
557 static int __init xhci_plat_init(void)
558 {
559 	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
560 	return platform_driver_register(&usb_generic_xhci_driver);
561 }
562 module_init(xhci_plat_init);
563 
564 static void __exit xhci_plat_exit(void)
565 {
566 	platform_driver_unregister(&usb_generic_xhci_driver);
567 }
568 module_exit(xhci_plat_exit);
569 
570 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
571 MODULE_LICENSE("GPL");
572