1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * KLSI KL5KUSB105 chip RS232 converter driver 4 * 5 * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> 6 * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de> 7 * 8 * All information about the device was acquired using SniffUSB ans snoopUSB 9 * on Windows98. 10 * It was written out of frustration with the PalmConnect USB Serial adapter 11 * sold by Palm Inc. 12 * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided 13 * information that was not already available. 14 * 15 * It seems that KLSI bought some silicon-design information from ScanLogic, 16 * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. 17 * KLSI has firmware available for their devices; it is probable that the 18 * firmware differs from that used by KLSI in their products. If you have an 19 * original KLSI device and can provide some information on it, I would be 20 * most interested in adding support for it here. If you have any information 21 * on the protocol used (or find errors in my reverse-engineered stuff), please 22 * let me know. 23 * 24 * The code was only tested with a PalmConnect USB adapter; if you 25 * are adventurous, try it with any KLSI-based device and let me know how it 26 * breaks so that I can fix it! 27 */ 28 29 /* TODO: 30 * check modem line signals 31 * implement handshaking or decide that we do not support it 32 */ 33 34 #include <linux/kernel.h> 35 #include <linux/errno.h> 36 #include <linux/slab.h> 37 #include <linux/tty.h> 38 #include <linux/tty_driver.h> 39 #include <linux/tty_flip.h> 40 #include <linux/module.h> 41 #include <linux/uaccess.h> 42 #include <asm/unaligned.h> 43 #include <linux/usb.h> 44 #include <linux/usb/serial.h> 45 #include "kl5kusb105.h" 46 47 #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>" 48 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver" 49 50 51 /* 52 * Function prototypes 53 */ 54 static int klsi_105_port_probe(struct usb_serial_port *port); 55 static int klsi_105_port_remove(struct usb_serial_port *port); 56 static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); 57 static void klsi_105_close(struct usb_serial_port *port); 58 static void klsi_105_set_termios(struct tty_struct *tty, 59 struct usb_serial_port *port, struct ktermios *old); 60 static int klsi_105_tiocmget(struct tty_struct *tty); 61 static void klsi_105_process_read_urb(struct urb *urb); 62 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, 63 void *dest, size_t size); 64 65 /* 66 * All of the device info needed for the KLSI converters. 67 */ 68 static const struct usb_device_id id_table[] = { 69 { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, 70 { } /* Terminating entry */ 71 }; 72 73 MODULE_DEVICE_TABLE(usb, id_table); 74 75 static struct usb_serial_driver kl5kusb105d_device = { 76 .driver = { 77 .owner = THIS_MODULE, 78 .name = "kl5kusb105d", 79 }, 80 .description = "KL5KUSB105D / PalmConnect", 81 .id_table = id_table, 82 .num_ports = 1, 83 .bulk_out_size = 64, 84 .open = klsi_105_open, 85 .close = klsi_105_close, 86 .set_termios = klsi_105_set_termios, 87 .tiocmget = klsi_105_tiocmget, 88 .port_probe = klsi_105_port_probe, 89 .port_remove = klsi_105_port_remove, 90 .throttle = usb_serial_generic_throttle, 91 .unthrottle = usb_serial_generic_unthrottle, 92 .process_read_urb = klsi_105_process_read_urb, 93 .prepare_write_buffer = klsi_105_prepare_write_buffer, 94 }; 95 96 static struct usb_serial_driver * const serial_drivers[] = { 97 &kl5kusb105d_device, NULL 98 }; 99 100 struct klsi_105_port_settings { 101 u8 pktlen; /* always 5, it seems */ 102 u8 baudrate; 103 u8 databits; 104 u8 unknown1; 105 u8 unknown2; 106 }; 107 108 struct klsi_105_private { 109 struct klsi_105_port_settings cfg; 110 unsigned long line_state; /* modem line settings */ 111 spinlock_t lock; 112 }; 113 114 115 /* 116 * Handle vendor specific USB requests 117 */ 118 119 120 #define KLSI_TIMEOUT 5000 /* default urb timeout */ 121 122 static int klsi_105_chg_port_settings(struct usb_serial_port *port, 123 struct klsi_105_port_settings *settings) 124 { 125 int rc; 126 127 rc = usb_control_msg(port->serial->dev, 128 usb_sndctrlpipe(port->serial->dev, 0), 129 KL5KUSB105A_SIO_SET_DATA, 130 USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, 131 0, /* value */ 132 0, /* index */ 133 settings, 134 sizeof(struct klsi_105_port_settings), 135 KLSI_TIMEOUT); 136 if (rc < 0) 137 dev_err(&port->dev, 138 "Change port settings failed (error = %d)\n", rc); 139 140 dev_dbg(&port->dev, 141 "pktlen %u, baudrate 0x%02x, databits %u, u1 %u, u2 %u\n", 142 settings->pktlen, settings->baudrate, settings->databits, 143 settings->unknown1, settings->unknown2); 144 145 return rc; 146 } 147 148 /* translate a 16-bit status value from the device to linux's TIO bits */ 149 static unsigned long klsi_105_status2linestate(const __u16 status) 150 { 151 unsigned long res = 0; 152 153 res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) 154 | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0) 155 ; 156 157 return res; 158 } 159 160 /* 161 * Read line control via vendor command and return result through 162 * *line_state_p 163 */ 164 /* It seems that the status buffer has always only 2 bytes length */ 165 #define KLSI_STATUSBUF_LEN 2 166 static int klsi_105_get_line_state(struct usb_serial_port *port, 167 unsigned long *line_state_p) 168 { 169 int rc; 170 u8 *status_buf; 171 __u16 status; 172 173 status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); 174 if (!status_buf) 175 return -ENOMEM; 176 177 status_buf[0] = 0xff; 178 status_buf[1] = 0xff; 179 rc = usb_control_msg(port->serial->dev, 180 usb_rcvctrlpipe(port->serial->dev, 0), 181 KL5KUSB105A_SIO_POLL, 182 USB_TYPE_VENDOR | USB_DIR_IN, 183 0, /* value */ 184 0, /* index */ 185 status_buf, KLSI_STATUSBUF_LEN, 186 10000 187 ); 188 if (rc != KLSI_STATUSBUF_LEN) { 189 dev_err(&port->dev, "reading line status failed: %d\n", rc); 190 if (rc >= 0) 191 rc = -EIO; 192 } else { 193 status = get_unaligned_le16(status_buf); 194 195 dev_dbg(&port->dev, "read status %02x %02x\n", 196 status_buf[0], status_buf[1]); 197 198 *line_state_p = klsi_105_status2linestate(status); 199 } 200 201 kfree(status_buf); 202 return rc; 203 } 204 205 206 /* 207 * Driver's tty interface functions 208 */ 209 210 static int klsi_105_port_probe(struct usb_serial_port *port) 211 { 212 struct klsi_105_private *priv; 213 214 priv = kmalloc(sizeof(*priv), GFP_KERNEL); 215 if (!priv) 216 return -ENOMEM; 217 218 /* set initial values for control structures */ 219 priv->cfg.pktlen = 5; 220 priv->cfg.baudrate = kl5kusb105a_sio_b9600; 221 priv->cfg.databits = kl5kusb105a_dtb_8; 222 priv->cfg.unknown1 = 0; 223 priv->cfg.unknown2 = 1; 224 225 priv->line_state = 0; 226 227 spin_lock_init(&priv->lock); 228 229 usb_set_serial_port_data(port, priv); 230 231 return 0; 232 } 233 234 static int klsi_105_port_remove(struct usb_serial_port *port) 235 { 236 struct klsi_105_private *priv; 237 238 priv = usb_get_serial_port_data(port); 239 kfree(priv); 240 241 return 0; 242 } 243 244 static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) 245 { 246 struct klsi_105_private *priv = usb_get_serial_port_data(port); 247 int retval = 0; 248 int rc; 249 unsigned long line_state; 250 struct klsi_105_port_settings *cfg; 251 unsigned long flags; 252 253 /* Do a defined restart: 254 * Set up sane default baud rate and send the 'READ_ON' 255 * vendor command. 256 * FIXME: set modem line control (how?) 257 * Then read the modem line control and store values in 258 * priv->line_state. 259 */ 260 cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); 261 if (!cfg) 262 return -ENOMEM; 263 264 cfg->pktlen = 5; 265 cfg->baudrate = kl5kusb105a_sio_b9600; 266 cfg->databits = kl5kusb105a_dtb_8; 267 cfg->unknown1 = 0; 268 cfg->unknown2 = 1; 269 klsi_105_chg_port_settings(port, cfg); 270 271 spin_lock_irqsave(&priv->lock, flags); 272 priv->cfg.pktlen = cfg->pktlen; 273 priv->cfg.baudrate = cfg->baudrate; 274 priv->cfg.databits = cfg->databits; 275 priv->cfg.unknown1 = cfg->unknown1; 276 priv->cfg.unknown2 = cfg->unknown2; 277 spin_unlock_irqrestore(&priv->lock, flags); 278 279 /* READ_ON and urb submission */ 280 rc = usb_serial_generic_open(tty, port); 281 if (rc) { 282 retval = rc; 283 goto err_free_cfg; 284 } 285 286 rc = usb_control_msg(port->serial->dev, 287 usb_sndctrlpipe(port->serial->dev, 0), 288 KL5KUSB105A_SIO_CONFIGURE, 289 USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, 290 KL5KUSB105A_SIO_CONFIGURE_READ_ON, 291 0, /* index */ 292 NULL, 293 0, 294 KLSI_TIMEOUT); 295 if (rc < 0) { 296 dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); 297 retval = rc; 298 goto err_generic_close; 299 } else 300 dev_dbg(&port->dev, "%s - enabled reading\n", __func__); 301 302 rc = klsi_105_get_line_state(port, &line_state); 303 if (rc < 0) { 304 retval = rc; 305 goto err_disable_read; 306 } 307 308 spin_lock_irqsave(&priv->lock, flags); 309 priv->line_state = line_state; 310 spin_unlock_irqrestore(&priv->lock, flags); 311 dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, 312 line_state); 313 314 return 0; 315 316 err_disable_read: 317 usb_control_msg(port->serial->dev, 318 usb_sndctrlpipe(port->serial->dev, 0), 319 KL5KUSB105A_SIO_CONFIGURE, 320 USB_TYPE_VENDOR | USB_DIR_OUT, 321 KL5KUSB105A_SIO_CONFIGURE_READ_OFF, 322 0, /* index */ 323 NULL, 0, 324 KLSI_TIMEOUT); 325 err_generic_close: 326 usb_serial_generic_close(port); 327 err_free_cfg: 328 kfree(cfg); 329 330 return retval; 331 } 332 333 static void klsi_105_close(struct usb_serial_port *port) 334 { 335 int rc; 336 337 /* send READ_OFF */ 338 rc = usb_control_msg(port->serial->dev, 339 usb_sndctrlpipe(port->serial->dev, 0), 340 KL5KUSB105A_SIO_CONFIGURE, 341 USB_TYPE_VENDOR | USB_DIR_OUT, 342 KL5KUSB105A_SIO_CONFIGURE_READ_OFF, 343 0, /* index */ 344 NULL, 0, 345 KLSI_TIMEOUT); 346 if (rc < 0) 347 dev_err(&port->dev, "failed to disable read: %d\n", rc); 348 349 /* shutdown our bulk reads and writes */ 350 usb_serial_generic_close(port); 351 } 352 353 /* We need to write a complete 64-byte data block and encode the 354 * number actually sent in the first double-byte, LSB-order. That 355 * leaves at most 62 bytes of payload. 356 */ 357 #define KLSI_HDR_LEN 2 358 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, 359 void *dest, size_t size) 360 { 361 unsigned char *buf = dest; 362 int count; 363 364 count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, 365 &port->lock); 366 put_unaligned_le16(count, buf); 367 368 return count + KLSI_HDR_LEN; 369 } 370 371 /* The data received is preceded by a length double-byte in LSB-first order. 372 */ 373 static void klsi_105_process_read_urb(struct urb *urb) 374 { 375 struct usb_serial_port *port = urb->context; 376 unsigned char *data = urb->transfer_buffer; 377 unsigned len; 378 379 /* empty urbs seem to happen, we ignore them */ 380 if (!urb->actual_length) 381 return; 382 383 if (urb->actual_length <= KLSI_HDR_LEN) { 384 dev_dbg(&port->dev, "%s - malformed packet\n", __func__); 385 return; 386 } 387 388 len = get_unaligned_le16(data); 389 if (len > urb->actual_length - KLSI_HDR_LEN) { 390 dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); 391 len = urb->actual_length - KLSI_HDR_LEN; 392 } 393 394 tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len); 395 tty_flip_buffer_push(&port->port); 396 } 397 398 static void klsi_105_set_termios(struct tty_struct *tty, 399 struct usb_serial_port *port, 400 struct ktermios *old_termios) 401 { 402 struct klsi_105_private *priv = usb_get_serial_port_data(port); 403 struct device *dev = &port->dev; 404 unsigned int iflag = tty->termios.c_iflag; 405 unsigned int old_iflag = old_termios->c_iflag; 406 unsigned int cflag = tty->termios.c_cflag; 407 unsigned int old_cflag = old_termios->c_cflag; 408 struct klsi_105_port_settings *cfg; 409 unsigned long flags; 410 speed_t baud; 411 412 cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); 413 if (!cfg) 414 return; 415 416 /* lock while we are modifying the settings */ 417 spin_lock_irqsave(&priv->lock, flags); 418 419 /* 420 * Update baud rate 421 */ 422 baud = tty_get_baud_rate(tty); 423 424 switch (baud) { 425 case 0: /* handled below */ 426 break; 427 case 1200: 428 priv->cfg.baudrate = kl5kusb105a_sio_b1200; 429 break; 430 case 2400: 431 priv->cfg.baudrate = kl5kusb105a_sio_b2400; 432 break; 433 case 4800: 434 priv->cfg.baudrate = kl5kusb105a_sio_b4800; 435 break; 436 case 9600: 437 priv->cfg.baudrate = kl5kusb105a_sio_b9600; 438 break; 439 case 19200: 440 priv->cfg.baudrate = kl5kusb105a_sio_b19200; 441 break; 442 case 38400: 443 priv->cfg.baudrate = kl5kusb105a_sio_b38400; 444 break; 445 case 57600: 446 priv->cfg.baudrate = kl5kusb105a_sio_b57600; 447 break; 448 case 115200: 449 priv->cfg.baudrate = kl5kusb105a_sio_b115200; 450 break; 451 default: 452 dev_dbg(dev, "unsupported baudrate, using 9600\n"); 453 priv->cfg.baudrate = kl5kusb105a_sio_b9600; 454 baud = 9600; 455 break; 456 } 457 458 /* 459 * FIXME: implement B0 handling 460 * 461 * Maybe this should be simulated by sending read disable and read 462 * enable messages? 463 */ 464 465 tty_encode_baud_rate(tty, baud, baud); 466 467 if ((cflag & CSIZE) != (old_cflag & CSIZE)) { 468 /* set the number of data bits */ 469 switch (cflag & CSIZE) { 470 case CS5: 471 dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__); 472 spin_unlock_irqrestore(&priv->lock, flags); 473 goto err; 474 case CS6: 475 dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__); 476 spin_unlock_irqrestore(&priv->lock, flags); 477 goto err; 478 case CS7: 479 priv->cfg.databits = kl5kusb105a_dtb_7; 480 break; 481 case CS8: 482 priv->cfg.databits = kl5kusb105a_dtb_8; 483 break; 484 default: 485 dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n"); 486 priv->cfg.databits = kl5kusb105a_dtb_8; 487 break; 488 } 489 } 490 491 /* 492 * Update line control register (LCR) 493 */ 494 if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) 495 || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { 496 /* Not currently supported */ 497 tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB); 498 } 499 /* 500 * Set flow control: well, I do not really now how to handle DTR/RTS. 501 * Just do what we have seen with SniffUSB on Win98. 502 */ 503 if ((iflag & IXOFF) != (old_iflag & IXOFF) 504 || (iflag & IXON) != (old_iflag & IXON) 505 || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { 506 /* Not currently supported */ 507 tty->termios.c_cflag &= ~CRTSCTS; 508 } 509 memcpy(cfg, &priv->cfg, sizeof(*cfg)); 510 spin_unlock_irqrestore(&priv->lock, flags); 511 512 /* now commit changes to device */ 513 klsi_105_chg_port_settings(port, cfg); 514 err: 515 kfree(cfg); 516 } 517 518 static int klsi_105_tiocmget(struct tty_struct *tty) 519 { 520 struct usb_serial_port *port = tty->driver_data; 521 struct klsi_105_private *priv = usb_get_serial_port_data(port); 522 unsigned long flags; 523 int rc; 524 unsigned long line_state; 525 526 rc = klsi_105_get_line_state(port, &line_state); 527 if (rc < 0) { 528 dev_err(&port->dev, 529 "Reading line control failed (error = %d)\n", rc); 530 /* better return value? EAGAIN? */ 531 return rc; 532 } 533 534 spin_lock_irqsave(&priv->lock, flags); 535 priv->line_state = line_state; 536 spin_unlock_irqrestore(&priv->lock, flags); 537 dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); 538 return (int)line_state; 539 } 540 541 module_usb_serial_driver(serial_drivers, id_table); 542 543 MODULE_AUTHOR(DRIVER_AUTHOR); 544 MODULE_DESCRIPTION(DRIVER_DESC); 545 MODULE_LICENSE("GPL"); 546