xref: /linux/drivers/watchdog/rzn1_wdt.c (revision 2da68a77)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Renesas RZ/N1 Watchdog timer.
4  * This is a 12-bit timer driver from a (62.5/16384) MHz clock. It can't even
5  * cope with 2 seconds.
6  *
7  * Copyright 2018 Renesas Electronics Europe Ltd.
8  *
9  * Derived from Ralink RT288x watchdog timer.
10  */
11 
12 #include <linux/clk.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/of_address.h>
17 #include <linux/of_irq.h>
18 #include <linux/platform_device.h>
19 #include <linux/reboot.h>
20 #include <linux/watchdog.h>
21 
22 #define DEFAULT_TIMEOUT		60
23 
24 #define RZN1_WDT_RETRIGGER			0x0
25 #define RZN1_WDT_RETRIGGER_RELOAD_VAL		0
26 #define RZN1_WDT_RETRIGGER_RELOAD_VAL_MASK	0xfff
27 #define RZN1_WDT_RETRIGGER_PRESCALE		BIT(12)
28 #define RZN1_WDT_RETRIGGER_ENABLE		BIT(13)
29 #define RZN1_WDT_RETRIGGER_WDSI			(0x2 << 14)
30 
31 #define RZN1_WDT_PRESCALER			16384
32 #define RZN1_WDT_MAX				4095
33 
34 struct rzn1_watchdog {
35 	struct watchdog_device		wdtdev;
36 	void __iomem			*base;
37 	unsigned long			clk_rate_khz;
38 };
39 
40 static inline uint32_t max_heart_beat_ms(unsigned long clk_rate_khz)
41 {
42 	return (RZN1_WDT_MAX * RZN1_WDT_PRESCALER) / clk_rate_khz;
43 }
44 
45 static inline uint32_t compute_reload_value(uint32_t tick_ms,
46 					    unsigned long clk_rate_khz)
47 {
48 	return (tick_ms * clk_rate_khz) / RZN1_WDT_PRESCALER;
49 }
50 
51 static int rzn1_wdt_ping(struct watchdog_device *w)
52 {
53 	struct rzn1_watchdog *wdt = watchdog_get_drvdata(w);
54 
55 	/* Any value retrigggers the watchdog */
56 	writel(0, wdt->base + RZN1_WDT_RETRIGGER);
57 
58 	return 0;
59 }
60 
61 static int rzn1_wdt_start(struct watchdog_device *w)
62 {
63 	struct rzn1_watchdog *wdt = watchdog_get_drvdata(w);
64 	u32 val;
65 
66 	/*
67 	 * The hardware allows you to write to this reg only once.
68 	 * Since this includes the reload value, there is no way to change the
69 	 * timeout once started. Also note that the WDT clock is half the bus
70 	 * fabric clock rate, so if the bus fabric clock rate is changed after
71 	 * the WDT is started, the WDT interval will be wrong.
72 	 */
73 	val = RZN1_WDT_RETRIGGER_WDSI;
74 	val |= RZN1_WDT_RETRIGGER_ENABLE;
75 	val |= RZN1_WDT_RETRIGGER_PRESCALE;
76 	val |= compute_reload_value(w->max_hw_heartbeat_ms, wdt->clk_rate_khz);
77 	writel(val, wdt->base + RZN1_WDT_RETRIGGER);
78 
79 	return 0;
80 }
81 
82 static irqreturn_t rzn1_wdt_irq(int irq, void *_wdt)
83 {
84 	pr_crit("RZN1 Watchdog. Initiating system reboot\n");
85 	emergency_restart();
86 
87 	return IRQ_HANDLED;
88 }
89 
90 static struct watchdog_info rzn1_wdt_info = {
91 	.identity = "RZ/N1 Watchdog",
92 	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
93 };
94 
95 static const struct watchdog_ops rzn1_wdt_ops = {
96 	.owner = THIS_MODULE,
97 	.start = rzn1_wdt_start,
98 	.ping = rzn1_wdt_ping,
99 };
100 
101 static void rzn1_wdt_clk_disable_unprepare(void *data)
102 {
103 	clk_disable_unprepare(data);
104 }
105 
106 static int rzn1_wdt_probe(struct platform_device *pdev)
107 {
108 	struct device *dev = &pdev->dev;
109 	struct rzn1_watchdog *wdt;
110 	struct device_node *np = dev->of_node;
111 	struct clk *clk;
112 	unsigned long clk_rate;
113 	int ret;
114 	int irq;
115 
116 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
117 	if (!wdt)
118 		return -ENOMEM;
119 
120 	wdt->base = devm_platform_ioremap_resource(pdev, 0);
121 	if (IS_ERR(wdt->base))
122 		return PTR_ERR(wdt->base);
123 
124 	irq = platform_get_irq(pdev, 0);
125 	if (irq < 0)
126 		return irq;
127 
128 	ret = devm_request_irq(dev, irq, rzn1_wdt_irq, 0,
129 			       np->name, wdt);
130 	if (ret) {
131 		dev_err(dev, "failed to request irq %d\n", irq);
132 		return ret;
133 	}
134 
135 	clk = devm_clk_get(dev, NULL);
136 	if (IS_ERR(clk)) {
137 		dev_err(dev, "failed to get the clock\n");
138 		return PTR_ERR(clk);
139 	}
140 
141 	ret = clk_prepare_enable(clk);
142 	if (ret) {
143 		dev_err(dev, "failed to prepare/enable the clock\n");
144 		return ret;
145 	}
146 
147 	ret = devm_add_action_or_reset(dev, rzn1_wdt_clk_disable_unprepare,
148 				       clk);
149 	if (ret)
150 		return ret;
151 
152 	clk_rate = clk_get_rate(clk);
153 	if (!clk_rate) {
154 		dev_err(dev, "failed to get the clock rate\n");
155 		return -EINVAL;
156 	}
157 
158 	wdt->clk_rate_khz = clk_rate / 1000;
159 	wdt->wdtdev.info = &rzn1_wdt_info,
160 	wdt->wdtdev.ops = &rzn1_wdt_ops,
161 	wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS,
162 	wdt->wdtdev.parent = dev;
163 	/*
164 	 * The period of the watchdog cannot be changed once set
165 	 * and is limited to a very short period.
166 	 * Configure it for a 1s period once and for all, and
167 	 * rely on the heart-beat provided by the watchdog core
168 	 * to make this usable by the user-space.
169 	 */
170 	wdt->wdtdev.max_hw_heartbeat_ms = max_heart_beat_ms(wdt->clk_rate_khz);
171 	if (wdt->wdtdev.max_hw_heartbeat_ms > 1000)
172 		wdt->wdtdev.max_hw_heartbeat_ms = 1000;
173 
174 	wdt->wdtdev.timeout = DEFAULT_TIMEOUT;
175 	ret = watchdog_init_timeout(&wdt->wdtdev, 0, dev);
176 	if (ret)
177 		return ret;
178 
179 	watchdog_set_drvdata(&wdt->wdtdev, wdt);
180 
181 	return devm_watchdog_register_device(dev, &wdt->wdtdev);
182 }
183 
184 
185 static const struct of_device_id rzn1_wdt_match[] = {
186 	{ .compatible = "renesas,rzn1-wdt" },
187 	{},
188 };
189 MODULE_DEVICE_TABLE(of, rzn1_wdt_match);
190 
191 static struct platform_driver rzn1_wdt_driver = {
192 	.probe		= rzn1_wdt_probe,
193 	.driver		= {
194 		.name		= KBUILD_MODNAME,
195 		.of_match_table	= rzn1_wdt_match,
196 	},
197 };
198 
199 module_platform_driver(rzn1_wdt_driver);
200 
201 MODULE_DESCRIPTION("Renesas RZ/N1 hardware watchdog");
202 MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
203 MODULE_LICENSE("GPL");
204