xref: /linux/fs/xfs/scrub/refcount.c (revision c6fbb759)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2017 Oracle.  All Rights Reserved.
4  * Author: Darrick J. Wong <darrick.wong@oracle.com>
5  */
6 #include "xfs.h"
7 #include "xfs_fs.h"
8 #include "xfs_shared.h"
9 #include "xfs_format.h"
10 #include "xfs_btree.h"
11 #include "xfs_rmap.h"
12 #include "xfs_refcount.h"
13 #include "scrub/scrub.h"
14 #include "scrub/common.h"
15 #include "scrub/btree.h"
16 #include "xfs_trans_resv.h"
17 #include "xfs_mount.h"
18 #include "xfs_ag.h"
19 
20 /*
21  * Set us up to scrub reference count btrees.
22  */
23 int
24 xchk_setup_ag_refcountbt(
25 	struct xfs_scrub	*sc)
26 {
27 	return xchk_setup_ag_btree(sc, false);
28 }
29 
30 /* Reference count btree scrubber. */
31 
32 /*
33  * Confirming Reference Counts via Reverse Mappings
34  *
35  * We want to count the reverse mappings overlapping a refcount record
36  * (bno, len, refcount), allowing for the possibility that some of the
37  * overlap may come from smaller adjoining reverse mappings, while some
38  * comes from single extents which overlap the range entirely.  The
39  * outer loop is as follows:
40  *
41  * 1. For all reverse mappings overlapping the refcount extent,
42  *    a. If a given rmap completely overlaps, mark it as seen.
43  *    b. Otherwise, record the fragment (in agbno order) for later
44  *       processing.
45  *
46  * Once we've seen all the rmaps, we know that for all blocks in the
47  * refcount record we want to find $refcount owners and we've already
48  * visited $seen extents that overlap all the blocks.  Therefore, we
49  * need to find ($refcount - $seen) owners for every block in the
50  * extent; call that quantity $target_nr.  Proceed as follows:
51  *
52  * 2. Pull the first $target_nr fragments from the list; all of them
53  *    should start at or before the start of the extent.
54  *    Call this subset of fragments the working set.
55  * 3. Until there are no more unprocessed fragments,
56  *    a. Find the shortest fragments in the set and remove them.
57  *    b. Note the block number of the end of these fragments.
58  *    c. Pull the same number of fragments from the list.  All of these
59  *       fragments should start at the block number recorded in the
60  *       previous step.
61  *    d. Put those fragments in the set.
62  * 4. Check that there are $target_nr fragments remaining in the list,
63  *    and that they all end at or beyond the end of the refcount extent.
64  *
65  * If the refcount is correct, all the check conditions in the algorithm
66  * should always hold true.  If not, the refcount is incorrect.
67  */
68 struct xchk_refcnt_frag {
69 	struct list_head	list;
70 	struct xfs_rmap_irec	rm;
71 };
72 
73 struct xchk_refcnt_check {
74 	struct xfs_scrub	*sc;
75 	struct list_head	fragments;
76 
77 	/* refcount extent we're examining */
78 	xfs_agblock_t		bno;
79 	xfs_extlen_t		len;
80 	xfs_nlink_t		refcount;
81 
82 	/* number of owners seen */
83 	xfs_nlink_t		seen;
84 };
85 
86 /*
87  * Decide if the given rmap is large enough that we can redeem it
88  * towards refcount verification now, or if it's a fragment, in
89  * which case we'll hang onto it in the hopes that we'll later
90  * discover that we've collected exactly the correct number of
91  * fragments as the refcountbt says we should have.
92  */
93 STATIC int
94 xchk_refcountbt_rmap_check(
95 	struct xfs_btree_cur		*cur,
96 	const struct xfs_rmap_irec	*rec,
97 	void				*priv)
98 {
99 	struct xchk_refcnt_check	*refchk = priv;
100 	struct xchk_refcnt_frag		*frag;
101 	xfs_agblock_t			rm_last;
102 	xfs_agblock_t			rc_last;
103 	int				error = 0;
104 
105 	if (xchk_should_terminate(refchk->sc, &error))
106 		return error;
107 
108 	rm_last = rec->rm_startblock + rec->rm_blockcount - 1;
109 	rc_last = refchk->bno + refchk->len - 1;
110 
111 	/* Confirm that a single-owner refc extent is a CoW stage. */
112 	if (refchk->refcount == 1 && rec->rm_owner != XFS_RMAP_OWN_COW) {
113 		xchk_btree_xref_set_corrupt(refchk->sc, cur, 0);
114 		return 0;
115 	}
116 
117 	if (rec->rm_startblock <= refchk->bno && rm_last >= rc_last) {
118 		/*
119 		 * The rmap overlaps the refcount record, so we can confirm
120 		 * one refcount owner seen.
121 		 */
122 		refchk->seen++;
123 	} else {
124 		/*
125 		 * This rmap covers only part of the refcount record, so
126 		 * save the fragment for later processing.  If the rmapbt
127 		 * is healthy each rmap_irec we see will be in agbno order
128 		 * so we don't need insertion sort here.
129 		 */
130 		frag = kmem_alloc(sizeof(struct xchk_refcnt_frag),
131 				KM_MAYFAIL);
132 		if (!frag)
133 			return -ENOMEM;
134 		memcpy(&frag->rm, rec, sizeof(frag->rm));
135 		list_add_tail(&frag->list, &refchk->fragments);
136 	}
137 
138 	return 0;
139 }
140 
141 /*
142  * Given a bunch of rmap fragments, iterate through them, keeping
143  * a running tally of the refcount.  If this ever deviates from
144  * what we expect (which is the refcountbt's refcount minus the
145  * number of extents that totally covered the refcountbt extent),
146  * we have a refcountbt error.
147  */
148 STATIC void
149 xchk_refcountbt_process_rmap_fragments(
150 	struct xchk_refcnt_check	*refchk)
151 {
152 	struct list_head		worklist;
153 	struct xchk_refcnt_frag		*frag;
154 	struct xchk_refcnt_frag		*n;
155 	xfs_agblock_t			bno;
156 	xfs_agblock_t			rbno;
157 	xfs_agblock_t			next_rbno;
158 	xfs_nlink_t			nr;
159 	xfs_nlink_t			target_nr;
160 
161 	target_nr = refchk->refcount - refchk->seen;
162 	if (target_nr == 0)
163 		return;
164 
165 	/*
166 	 * There are (refchk->rc.rc_refcount - refchk->nr refcount)
167 	 * references we haven't found yet.  Pull that many off the
168 	 * fragment list and figure out where the smallest rmap ends
169 	 * (and therefore the next rmap should start).  All the rmaps
170 	 * we pull off should start at or before the beginning of the
171 	 * refcount record's range.
172 	 */
173 	INIT_LIST_HEAD(&worklist);
174 	rbno = NULLAGBLOCK;
175 
176 	/* Make sure the fragments actually /are/ in agbno order. */
177 	bno = 0;
178 	list_for_each_entry(frag, &refchk->fragments, list) {
179 		if (frag->rm.rm_startblock < bno)
180 			goto done;
181 		bno = frag->rm.rm_startblock;
182 	}
183 
184 	/*
185 	 * Find all the rmaps that start at or before the refc extent,
186 	 * and put them on the worklist.
187 	 */
188 	nr = 0;
189 	list_for_each_entry_safe(frag, n, &refchk->fragments, list) {
190 		if (frag->rm.rm_startblock > refchk->bno || nr > target_nr)
191 			break;
192 		bno = frag->rm.rm_startblock + frag->rm.rm_blockcount;
193 		if (bno < rbno)
194 			rbno = bno;
195 		list_move_tail(&frag->list, &worklist);
196 		nr++;
197 	}
198 
199 	/*
200 	 * We should have found exactly $target_nr rmap fragments starting
201 	 * at or before the refcount extent.
202 	 */
203 	if (nr != target_nr)
204 		goto done;
205 
206 	while (!list_empty(&refchk->fragments)) {
207 		/* Discard any fragments ending at rbno from the worklist. */
208 		nr = 0;
209 		next_rbno = NULLAGBLOCK;
210 		list_for_each_entry_safe(frag, n, &worklist, list) {
211 			bno = frag->rm.rm_startblock + frag->rm.rm_blockcount;
212 			if (bno != rbno) {
213 				if (bno < next_rbno)
214 					next_rbno = bno;
215 				continue;
216 			}
217 			list_del(&frag->list);
218 			kmem_free(frag);
219 			nr++;
220 		}
221 
222 		/* Try to add nr rmaps starting at rbno to the worklist. */
223 		list_for_each_entry_safe(frag, n, &refchk->fragments, list) {
224 			bno = frag->rm.rm_startblock + frag->rm.rm_blockcount;
225 			if (frag->rm.rm_startblock != rbno)
226 				goto done;
227 			list_move_tail(&frag->list, &worklist);
228 			if (next_rbno > bno)
229 				next_rbno = bno;
230 			nr--;
231 			if (nr == 0)
232 				break;
233 		}
234 
235 		/*
236 		 * If we get here and nr > 0, this means that we added fewer
237 		 * items to the worklist than we discarded because the fragment
238 		 * list ran out of items.  Therefore, we cannot maintain the
239 		 * required refcount.  Something is wrong, so we're done.
240 		 */
241 		if (nr)
242 			goto done;
243 
244 		rbno = next_rbno;
245 	}
246 
247 	/*
248 	 * Make sure the last extent we processed ends at or beyond
249 	 * the end of the refcount extent.
250 	 */
251 	if (rbno < refchk->bno + refchk->len)
252 		goto done;
253 
254 	/* Actually record us having seen the remaining refcount. */
255 	refchk->seen = refchk->refcount;
256 done:
257 	/* Delete fragments and work list. */
258 	list_for_each_entry_safe(frag, n, &worklist, list) {
259 		list_del(&frag->list);
260 		kmem_free(frag);
261 	}
262 	list_for_each_entry_safe(frag, n, &refchk->fragments, list) {
263 		list_del(&frag->list);
264 		kmem_free(frag);
265 	}
266 }
267 
268 /* Use the rmap entries covering this extent to verify the refcount. */
269 STATIC void
270 xchk_refcountbt_xref_rmap(
271 	struct xfs_scrub		*sc,
272 	xfs_agblock_t			bno,
273 	xfs_extlen_t			len,
274 	xfs_nlink_t			refcount)
275 {
276 	struct xchk_refcnt_check	refchk = {
277 		.sc = sc,
278 		.bno = bno,
279 		.len = len,
280 		.refcount = refcount,
281 		.seen = 0,
282 	};
283 	struct xfs_rmap_irec		low;
284 	struct xfs_rmap_irec		high;
285 	struct xchk_refcnt_frag		*frag;
286 	struct xchk_refcnt_frag		*n;
287 	int				error;
288 
289 	if (!sc->sa.rmap_cur || xchk_skip_xref(sc->sm))
290 		return;
291 
292 	/* Cross-reference with the rmapbt to confirm the refcount. */
293 	memset(&low, 0, sizeof(low));
294 	low.rm_startblock = bno;
295 	memset(&high, 0xFF, sizeof(high));
296 	high.rm_startblock = bno + len - 1;
297 
298 	INIT_LIST_HEAD(&refchk.fragments);
299 	error = xfs_rmap_query_range(sc->sa.rmap_cur, &low, &high,
300 			&xchk_refcountbt_rmap_check, &refchk);
301 	if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur))
302 		goto out_free;
303 
304 	xchk_refcountbt_process_rmap_fragments(&refchk);
305 	if (refcount != refchk.seen)
306 		xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0);
307 
308 out_free:
309 	list_for_each_entry_safe(frag, n, &refchk.fragments, list) {
310 		list_del(&frag->list);
311 		kmem_free(frag);
312 	}
313 }
314 
315 /* Cross-reference with the other btrees. */
316 STATIC void
317 xchk_refcountbt_xref(
318 	struct xfs_scrub	*sc,
319 	xfs_agblock_t		agbno,
320 	xfs_extlen_t		len,
321 	xfs_nlink_t		refcount)
322 {
323 	if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_CORRUPT)
324 		return;
325 
326 	xchk_xref_is_used_space(sc, agbno, len);
327 	xchk_xref_is_not_inode_chunk(sc, agbno, len);
328 	xchk_refcountbt_xref_rmap(sc, agbno, len, refcount);
329 }
330 
331 /* Scrub a refcountbt record. */
332 STATIC int
333 xchk_refcountbt_rec(
334 	struct xchk_btree	*bs,
335 	const union xfs_btree_rec *rec)
336 {
337 	xfs_agblock_t		*cow_blocks = bs->private;
338 	struct xfs_perag	*pag = bs->cur->bc_ag.pag;
339 	xfs_agblock_t		bno;
340 	xfs_extlen_t		len;
341 	xfs_nlink_t		refcount;
342 	bool			has_cowflag;
343 
344 	bno = be32_to_cpu(rec->refc.rc_startblock);
345 	len = be32_to_cpu(rec->refc.rc_blockcount);
346 	refcount = be32_to_cpu(rec->refc.rc_refcount);
347 
348 	/* Only CoW records can have refcount == 1. */
349 	has_cowflag = (bno & XFS_REFC_COW_START);
350 	if ((refcount == 1 && !has_cowflag) || (refcount != 1 && has_cowflag))
351 		xchk_btree_set_corrupt(bs->sc, bs->cur, 0);
352 	if (has_cowflag)
353 		(*cow_blocks) += len;
354 
355 	/* Check the extent. */
356 	bno &= ~XFS_REFC_COW_START;
357 	if (bno + len <= bno ||
358 	    !xfs_verify_agbno(pag, bno) ||
359 	    !xfs_verify_agbno(pag, bno + len - 1))
360 		xchk_btree_set_corrupt(bs->sc, bs->cur, 0);
361 
362 	if (refcount == 0)
363 		xchk_btree_set_corrupt(bs->sc, bs->cur, 0);
364 
365 	xchk_refcountbt_xref(bs->sc, bno, len, refcount);
366 
367 	return 0;
368 }
369 
370 /* Make sure we have as many refc blocks as the rmap says. */
371 STATIC void
372 xchk_refcount_xref_rmap(
373 	struct xfs_scrub	*sc,
374 	xfs_filblks_t		cow_blocks)
375 {
376 	xfs_extlen_t		refcbt_blocks = 0;
377 	xfs_filblks_t		blocks;
378 	int			error;
379 
380 	if (!sc->sa.rmap_cur || xchk_skip_xref(sc->sm))
381 		return;
382 
383 	/* Check that we saw as many refcbt blocks as the rmap knows about. */
384 	error = xfs_btree_count_blocks(sc->sa.refc_cur, &refcbt_blocks);
385 	if (!xchk_btree_process_error(sc, sc->sa.refc_cur, 0, &error))
386 		return;
387 	error = xchk_count_rmap_ownedby_ag(sc, sc->sa.rmap_cur,
388 			&XFS_RMAP_OINFO_REFC, &blocks);
389 	if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur))
390 		return;
391 	if (blocks != refcbt_blocks)
392 		xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0);
393 
394 	/* Check that we saw as many cow blocks as the rmap knows about. */
395 	error = xchk_count_rmap_ownedby_ag(sc, sc->sa.rmap_cur,
396 			&XFS_RMAP_OINFO_COW, &blocks);
397 	if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur))
398 		return;
399 	if (blocks != cow_blocks)
400 		xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0);
401 }
402 
403 /* Scrub the refcount btree for some AG. */
404 int
405 xchk_refcountbt(
406 	struct xfs_scrub	*sc)
407 {
408 	xfs_agblock_t		cow_blocks = 0;
409 	int			error;
410 
411 	error = xchk_btree(sc, sc->sa.refc_cur, xchk_refcountbt_rec,
412 			&XFS_RMAP_OINFO_REFC, &cow_blocks);
413 	if (error)
414 		return error;
415 
416 	xchk_refcount_xref_rmap(sc, cow_blocks);
417 
418 	return 0;
419 }
420 
421 /* xref check that a cow staging extent is marked in the refcountbt. */
422 void
423 xchk_xref_is_cow_staging(
424 	struct xfs_scrub		*sc,
425 	xfs_agblock_t			agbno,
426 	xfs_extlen_t			len)
427 {
428 	struct xfs_refcount_irec	rc;
429 	bool				has_cowflag;
430 	int				has_refcount;
431 	int				error;
432 
433 	if (!sc->sa.refc_cur || xchk_skip_xref(sc->sm))
434 		return;
435 
436 	/* Find the CoW staging extent. */
437 	error = xfs_refcount_lookup_le(sc->sa.refc_cur,
438 			agbno + XFS_REFC_COW_START, &has_refcount);
439 	if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur))
440 		return;
441 	if (!has_refcount) {
442 		xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0);
443 		return;
444 	}
445 
446 	error = xfs_refcount_get_rec(sc->sa.refc_cur, &rc, &has_refcount);
447 	if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur))
448 		return;
449 	if (!has_refcount) {
450 		xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0);
451 		return;
452 	}
453 
454 	/* CoW flag must be set, refcount must be 1. */
455 	has_cowflag = (rc.rc_startblock & XFS_REFC_COW_START);
456 	if (!has_cowflag || rc.rc_refcount != 1)
457 		xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0);
458 
459 	/* Must be at least as long as what was passed in */
460 	if (rc.rc_blockcount < len)
461 		xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0);
462 }
463 
464 /*
465  * xref check that the extent is not shared.  Only file data blocks
466  * can have multiple owners.
467  */
468 void
469 xchk_xref_is_not_shared(
470 	struct xfs_scrub	*sc,
471 	xfs_agblock_t		agbno,
472 	xfs_extlen_t		len)
473 {
474 	bool			shared;
475 	int			error;
476 
477 	if (!sc->sa.refc_cur || xchk_skip_xref(sc->sm))
478 		return;
479 
480 	error = xfs_refcount_has_record(sc->sa.refc_cur, agbno, len, &shared);
481 	if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur))
482 		return;
483 	if (shared)
484 		xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0);
485 }
486