xref: /linux/include/linux/bcma/bcma_driver_pci.h (revision 990debe2)
1 #ifndef LINUX_BCMA_DRIVER_PCI_H_
2 #define LINUX_BCMA_DRIVER_PCI_H_
3 
4 #include <linux/types.h>
5 
6 struct pci_dev;
7 
8 /** PCI core registers. **/
9 #define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
10 #define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
11 #define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
12 #define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
13 #define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
14 #define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
15 #define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
16 #define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
17 #define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
18 #define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
19 #define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
20 #define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
21 #define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
22 #define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
23 #define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
24 #define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
25 #define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
26 #define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
27 #define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
28 #define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
29 #define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
30 #define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
31 #define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
32 #define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
33 #define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
34 #define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
35 #define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
36 #define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
37 #define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
38 #define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
39 #define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
40 #define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
41 #define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
42 #define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
43 #define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
44 #define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
45 #define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
46 #define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
47 #define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
48 #define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
49 #define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
50 #define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
51 #define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
52 #define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
53 #define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
54 #define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
55 #define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
56 #define BCMA_CORE_PCI_CONFIG_ADDR		0x0120	/* pcie config space access */
57 #define BCMA_CORE_PCI_CONFIG_DATA		0x0124	/* pcie config space access */
58 #define BCMA_CORE_PCI_MDIO_CONTROL		0x0128	/* controls the mdio access */
59 #define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK	0x7f	/* clock to be used on MDIO */
60 #define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL	0x2
61 #define  BCMA_CORE_PCI_MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
62 #define  BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE	0x100	/* Tranaction complete */
63 #define BCMA_CORE_PCI_MDIO_DATA			0x012c	/* Data to the mdio access */
64 #define  BCMA_CORE_PCI_MDIODATA_MASK		0x0000ffff /* data 2 bytes */
65 #define  BCMA_CORE_PCI_MDIODATA_TA		0x00020000 /* Turnaround */
66 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
67 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD	0x003c0000 /* Regaddr Mask (rev < 10) */
68 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
69 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD	0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
70 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF	18	/* Regaddr shift */
71 #define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK	0x007c0000 /* Regaddr Mask */
72 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF	23	/* Physmedia devaddr shift */
73 #define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK	0x0f800000 /* Physmedia devaddr Mask */
74 #define  BCMA_CORE_PCI_MDIODATA_WRITE		0x10000000 /* write Transaction */
75 #define  BCMA_CORE_PCI_MDIODATA_READ		0x20000000 /* Read Transaction */
76 #define  BCMA_CORE_PCI_MDIODATA_START		0x40000000 /* start of Transaction */
77 #define  BCMA_CORE_PCI_MDIODATA_DEV_ADDR	0x0	/* dev address for serdes */
78 #define  BCMA_CORE_PCI_MDIODATA_BLK_ADDR	0x1F	/* blk address for serdes */
79 #define  BCMA_CORE_PCI_MDIODATA_DEV_PLL		0x1d	/* SERDES PLL Dev */
80 #define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
81 #define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
82 #define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
83 #define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
84 #define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
85 #define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
86 #define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
87 #define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
88 #define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
89 #define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
90 #define  BCMA_CORE_PCI_SPROM_PI_OFFSET		0	/* first word */
91 #define   BCMA_CORE_PCI_SPROM_PI_MASK		0xf000	/* bit 15:12 */
92 #define   BCMA_CORE_PCI_SPROM_PI_SHIFT		12	/* bit 15:12 */
93 #define  BCMA_CORE_PCI_SPROM_MISC_CONFIG	5	/* word 5 */
94 #define   BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST	0x8000	/* bit 15 */
95 #define   BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5	20	/* word 20 for srom rev <= 5 */
96 #define   BCMA_CORE_PCI_SPROM_CLKREQ_ENB	0x0800	/* bit 11 */
97 
98 /* SBtoPCIx */
99 #define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
100 #define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
101 #define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
102 #define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
103 #define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
104 #define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
105 #define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
106 #define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
107 #define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
108 #define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
109 #define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
110 
111 /* PCIE protocol PHY diagnostic registers */
112 #define BCMA_CORE_PCI_PLP_MODEREG		0x200	/* Mode */
113 #define BCMA_CORE_PCI_PLP_STATUSREG		0x204	/* Status */
114 #define  BCMA_CORE_PCI_PLP_POLARITYINV_STAT	0x10	/* Status reg PCIE_PLP_STATUSREG */
115 #define BCMA_CORE_PCI_PLP_LTSSMCTRLREG		0x208	/* LTSSM control */
116 #define BCMA_CORE_PCI_PLP_LTLINKNUMREG		0x20c	/* Link Training Link number */
117 #define BCMA_CORE_PCI_PLP_LTLANENUMREG		0x210	/* Link Training Lane number */
118 #define BCMA_CORE_PCI_PLP_LTNFTSREG		0x214	/* Link Training N_FTS */
119 #define BCMA_CORE_PCI_PLP_ATTNREG		0x218	/* Attention */
120 #define BCMA_CORE_PCI_PLP_ATTNMASKREG		0x21C	/* Attention Mask */
121 #define BCMA_CORE_PCI_PLP_RXERRCTR		0x220	/* Rx Error */
122 #define BCMA_CORE_PCI_PLP_RXFRMERRCTR		0x224	/* Rx Framing Error */
123 #define BCMA_CORE_PCI_PLP_RXERRTHRESHREG	0x228	/* Rx Error threshold */
124 #define BCMA_CORE_PCI_PLP_TESTCTRLREG		0x22C	/* Test Control reg */
125 #define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG	0x230	/* SERDES Control Override */
126 #define BCMA_CORE_PCI_PLP_TIMINGOVRDREG		0x234	/* Timing param override */
127 #define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG		0x238	/* RXTX State Machine Diag */
128 #define BCMA_CORE_PCI_PLP_LTSSMDIAGREG		0x23C	/* LTSSM State Machine Diag */
129 
130 /* PCIE protocol DLLP diagnostic registers */
131 #define BCMA_CORE_PCI_DLLP_LCREG		0x100	/* Link Control */
132 #define BCMA_CORE_PCI_DLLP_LSREG		0x104	/* Link Status */
133 #define BCMA_CORE_PCI_DLLP_LAREG		0x108	/* Link Attention */
134 #define  BCMA_CORE_PCI_DLLP_LSREG_LINKUP	(1 << 16)
135 #define BCMA_CORE_PCI_DLLP_LAMASKREG		0x10C	/* Link Attention Mask */
136 #define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG	0x110	/* Next Tx Seq Num */
137 #define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG	0x114	/* Acked Tx Seq Num */
138 #define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG	0x118	/* Purged Tx Seq Num */
139 #define BCMA_CORE_PCI_DLLP_RXSEQNUMREG		0x11C	/* Rx Sequence Number */
140 #define BCMA_CORE_PCI_DLLP_LRREG		0x120	/* Link Replay */
141 #define BCMA_CORE_PCI_DLLP_LACKTOREG		0x124	/* Link Ack Timeout */
142 #define BCMA_CORE_PCI_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
143 #define  BCMA_CORE_PCI_ASPMTIMER_EXTEND		0x01000000 /* > rev7: enable extend ASPM timer */
144 #define BCMA_CORE_PCI_DLLP_RTRYWPREG		0x12C	/* Retry buffer write ptr */
145 #define BCMA_CORE_PCI_DLLP_RTRYRPREG		0x130	/* Retry buffer Read ptr */
146 #define BCMA_CORE_PCI_DLLP_RTRYPPREG		0x134	/* Retry buffer Purged ptr */
147 #define BCMA_CORE_PCI_DLLP_RTRRWREG		0x138	/* Retry buffer Read/Write */
148 #define BCMA_CORE_PCI_DLLP_ECTHRESHREG		0x13C	/* Error Count Threshold */
149 #define BCMA_CORE_PCI_DLLP_TLPERRCTRREG		0x140	/* TLP Error Counter */
150 #define BCMA_CORE_PCI_DLLP_ERRCTRREG		0x144	/* Error Counter */
151 #define BCMA_CORE_PCI_DLLP_NAKRXCTRREG		0x148	/* NAK Received Counter */
152 #define BCMA_CORE_PCI_DLLP_TESTREG		0x14C	/* Test */
153 #define BCMA_CORE_PCI_DLLP_PKTBIST		0x150	/* Packet BIST */
154 #define BCMA_CORE_PCI_DLLP_PCIE11		0x154	/* DLLP PCIE 1.1 reg */
155 
156 /* SERDES RX registers */
157 #define BCMA_CORE_PCI_SERDES_RX_CTRL		1	/* Rx cntrl */
158 #define  BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE	0x80	/* rxpolarity_force */
159 #define  BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY	0x40	/* rxpolarity_value */
160 #define BCMA_CORE_PCI_SERDES_RX_TIMER1		2	/* Rx Timer1 */
161 #define BCMA_CORE_PCI_SERDES_RX_CDR		6	/* CDR */
162 #define BCMA_CORE_PCI_SERDES_RX_CDRBW		7	/* CDR BW */
163 
164 /* SERDES PLL registers */
165 #define BCMA_CORE_PCI_SERDES_PLL_CTRL		1	/* PLL control reg */
166 #define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN	0x4000	/* bit 14 is FREQDET on */
167 
168 /* PCIcore specific boardflags */
169 #define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
170 
171 /* PCIE Config space accessing MACROS */
172 #define BCMA_CORE_PCI_CFG_BUS_SHIFT		24	/* Bus shift */
173 #define BCMA_CORE_PCI_CFG_SLOT_SHIFT		19	/* Slot/Device shift */
174 #define BCMA_CORE_PCI_CFG_FUN_SHIFT		16	/* Function shift */
175 #define BCMA_CORE_PCI_CFG_OFF_SHIFT		0	/* Register shift */
176 
177 #define BCMA_CORE_PCI_CFG_BUS_MASK		0xff	/* Bus mask */
178 #define BCMA_CORE_PCI_CFG_SLOT_MASK		0x1f	/* Slot/Device mask */
179 #define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
180 #define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */
181 
182 #define BCMA_CORE_PCI_CFG_DEVCTRL		0xd8
183 
184 /* PCIE Root Capability Register bits (Host mode only) */
185 #define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
186 
187 struct bcma_drv_pci;
188 
189 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
190 struct bcma_drv_pci_host {
191 	struct bcma_drv_pci *pdev;
192 
193 	u32 host_cfg_addr;
194 	spinlock_t cfgspace_lock;
195 
196 	struct pci_controller pci_controller;
197 	struct pci_ops pci_ops;
198 	struct resource mem_resource;
199 	struct resource io_resource;
200 };
201 #endif
202 
203 struct bcma_drv_pci {
204 	struct bcma_device *core;
205 	u8 setup_done:1;
206 	u8 hostmode:1;
207 
208 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
209 	struct bcma_drv_pci_host *host_controller;
210 #endif
211 };
212 
213 /* Register access */
214 #define pcicore_read16(pc, offset)		bcma_read16((pc)->core, offset)
215 #define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
216 #define pcicore_write16(pc, offset, val)	bcma_write16((pc)->core, offset, val)
217 #define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
218 
219 extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
220 extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
221 				 struct bcma_device *core, bool enable);
222 extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend);
223 
224 extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
225 extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
226 
227 #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
228