1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * linux/include/linux/serial_8250.h 4 * 5 * Copyright (C) 2004 Russell King 6 */ 7 #ifndef _LINUX_SERIAL_8250_H 8 #define _LINUX_SERIAL_8250_H 9 10 #include <linux/serial_core.h> 11 #include <linux/serial_reg.h> 12 #include <linux/platform_device.h> 13 14 /* 15 * This is the platform device platform_data structure 16 */ 17 struct plat_serial8250_port { 18 unsigned long iobase; /* io base address */ 19 void __iomem *membase; /* ioremap cookie or NULL */ 20 resource_size_t mapbase; /* resource base */ 21 unsigned int irq; /* interrupt number */ 22 unsigned long irqflags; /* request_irq flags */ 23 unsigned int uartclk; /* UART clock rate */ 24 void *private_data; 25 unsigned char regshift; /* register shift */ 26 unsigned char iotype; /* UPIO_* */ 27 unsigned char hub6; 28 unsigned char has_sysrq; /* supports magic SysRq */ 29 upf_t flags; /* UPF_* flags */ 30 unsigned int type; /* If UPF_FIXED_TYPE */ 31 unsigned int (*serial_in)(struct uart_port *, int); 32 void (*serial_out)(struct uart_port *, int, int); 33 void (*set_termios)(struct uart_port *, 34 struct ktermios *new, 35 struct ktermios *old); 36 void (*set_ldisc)(struct uart_port *, 37 struct ktermios *); 38 unsigned int (*get_mctrl)(struct uart_port *); 39 int (*handle_irq)(struct uart_port *); 40 void (*pm)(struct uart_port *, unsigned int state, 41 unsigned old); 42 void (*handle_break)(struct uart_port *); 43 }; 44 45 /* 46 * Allocate 8250 platform device IDs. Nothing is implied by 47 * the numbering here, except for the legacy entry being -1. 48 */ 49 enum { 50 PLAT8250_DEV_LEGACY = -1, 51 PLAT8250_DEV_PLATFORM, 52 PLAT8250_DEV_PLATFORM1, 53 PLAT8250_DEV_PLATFORM2, 54 PLAT8250_DEV_FOURPORT, 55 PLAT8250_DEV_ACCENT, 56 PLAT8250_DEV_BOCA, 57 PLAT8250_DEV_EXAR_ST16C554, 58 PLAT8250_DEV_HUB6, 59 PLAT8250_DEV_AU1X00, 60 PLAT8250_DEV_SM501, 61 }; 62 63 struct uart_8250_dma; 64 struct uart_8250_port; 65 66 /** 67 * 8250 core driver operations 68 * 69 * @setup_irq() Setup irq handling. The universal 8250 driver links this 70 * port to the irq chain. Other drivers may @request_irq(). 71 * @release_irq() Undo irq handling. The universal 8250 driver unlinks 72 * the port from the irq chain. 73 */ 74 struct uart_8250_ops { 75 int (*setup_irq)(struct uart_8250_port *); 76 void (*release_irq)(struct uart_8250_port *); 77 }; 78 79 struct uart_8250_em485 { 80 struct hrtimer start_tx_timer; /* "rs485 start tx" timer */ 81 struct hrtimer stop_tx_timer; /* "rs485 stop tx" timer */ 82 struct hrtimer *active_timer; /* pointer to active timer */ 83 struct uart_8250_port *port; /* for hrtimer callbacks */ 84 unsigned int tx_stopped:1; /* tx is currently stopped */ 85 }; 86 87 /* 88 * This should be used by drivers which want to register 89 * their own 8250 ports without registering their own 90 * platform device. Using these will make your driver 91 * dependent on the 8250 driver. 92 */ 93 94 struct uart_8250_port { 95 struct uart_port port; 96 struct timer_list timer; /* "no irq" timer */ 97 struct list_head list; /* ports on this IRQ */ 98 u32 capabilities; /* port capabilities */ 99 unsigned short bugs; /* port bugs */ 100 bool fifo_bug; /* min RX trigger if enabled */ 101 unsigned int tx_loadsz; /* transmit fifo load size */ 102 unsigned char acr; 103 unsigned char fcr; 104 unsigned char ier; 105 unsigned char lcr; 106 unsigned char mcr; 107 unsigned char cur_iotype; /* Running I/O type */ 108 unsigned int rpm_tx_active; 109 unsigned char canary; /* non-zero during system sleep 110 * if no_console_suspend 111 */ 112 unsigned char probe; 113 struct mctrl_gpios *gpios; 114 #define UART_PROBE_RSA (1 << 0) 115 116 /* 117 * Some bits in registers are cleared on a read, so they must 118 * be saved whenever the register is read but the bits will not 119 * be immediately processed. 120 */ 121 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS 122 unsigned char lsr_saved_flags; 123 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA 124 unsigned char msr_saved_flags; 125 126 struct uart_8250_dma *dma; 127 const struct uart_8250_ops *ops; 128 129 /* 8250 specific callbacks */ 130 int (*dl_read)(struct uart_8250_port *); 131 void (*dl_write)(struct uart_8250_port *, int); 132 133 struct uart_8250_em485 *em485; 134 void (*rs485_start_tx)(struct uart_8250_port *); 135 void (*rs485_stop_tx)(struct uart_8250_port *); 136 137 /* Serial port overrun backoff */ 138 struct delayed_work overrun_backoff; 139 u32 overrun_backoff_time_ms; 140 }; 141 142 static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up) 143 { 144 return container_of(up, struct uart_8250_port, port); 145 } 146 147 int serial8250_register_8250_port(const struct uart_8250_port *); 148 void serial8250_unregister_port(int line); 149 void serial8250_suspend_port(int line); 150 void serial8250_resume_port(int line); 151 152 extern int early_serial_setup(struct uart_port *port); 153 154 extern int early_serial8250_setup(struct earlycon_device *device, 155 const char *options); 156 extern void serial8250_update_uartclk(struct uart_port *port, 157 unsigned int uartclk); 158 extern void serial8250_do_set_termios(struct uart_port *port, 159 struct ktermios *termios, struct ktermios *old); 160 extern void serial8250_do_set_ldisc(struct uart_port *port, 161 struct ktermios *termios); 162 extern unsigned int serial8250_do_get_mctrl(struct uart_port *port); 163 extern int serial8250_do_startup(struct uart_port *port); 164 extern void serial8250_do_shutdown(struct uart_port *port); 165 extern void serial8250_do_pm(struct uart_port *port, unsigned int state, 166 unsigned int oldstate); 167 extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); 168 extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, 169 unsigned int quot, 170 unsigned int quot_frac); 171 extern int fsl8250_handle_irq(struct uart_port *port); 172 int serial8250_handle_irq(struct uart_port *port, unsigned int iir); 173 unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); 174 void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr); 175 void serial8250_tx_chars(struct uart_8250_port *up); 176 unsigned int serial8250_modem_status(struct uart_8250_port *up); 177 void serial8250_init_port(struct uart_8250_port *up); 178 void serial8250_set_defaults(struct uart_8250_port *up); 179 void serial8250_console_write(struct uart_8250_port *up, const char *s, 180 unsigned int count); 181 int serial8250_console_setup(struct uart_port *port, char *options, bool probe); 182 int serial8250_console_exit(struct uart_port *port); 183 184 extern void serial8250_set_isa_configurator(void (*v) 185 (int port, struct uart_port *up, 186 u32 *capabilities)); 187 188 #ifdef CONFIG_SERIAL_8250_RT288X 189 unsigned int au_serial_in(struct uart_port *p, int offset); 190 void au_serial_out(struct uart_port *p, int offset, int value); 191 #endif 192 193 #endif 194