1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * NXP ISP1301 USB transceiver driver 4 * 5 * Copyright (C) 2012 Roland Stigge <stigge@antcom.de> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 */ 17 18 #ifndef __LINUX_USB_ISP1301_H 19 #define __LINUX_USB_ISP1301_H 20 21 #include <linux/of.h> 22 23 /* I2C Register definitions: */ 24 25 #define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ 26 27 #define MC1_SPEED_REG (1 << 0) 28 #define MC1_SUSPEND_REG (1 << 1) 29 #define MC1_DAT_SE0 (1 << 2) 30 #define MC1_TRANSPARENT (1 << 3) 31 #define MC1_BDIS_ACON_EN (1 << 4) 32 #define MC1_OE_INT_EN (1 << 5) 33 #define MC1_UART_EN (1 << 6) 34 #define MC1_MASK 0x7f 35 36 #define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ 37 38 #define MC2_GLOBAL_PWR_DN (1 << 0) 39 #define MC2_SPD_SUSP_CTRL (1 << 1) 40 #define MC2_BI_DI (1 << 2) 41 #define MC2_TRANSP_BDIR0 (1 << 3) 42 #define MC2_TRANSP_BDIR1 (1 << 4) 43 #define MC2_AUDIO_EN (1 << 5) 44 #define MC2_PSW_EN (1 << 6) 45 #define MC2_EN2V7 (1 << 7) 46 47 #define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ 48 49 #define OTG1_DP_PULLUP (1 << 0) 50 #define OTG1_DM_PULLUP (1 << 1) 51 #define OTG1_DP_PULLDOWN (1 << 2) 52 #define OTG1_DM_PULLDOWN (1 << 3) 53 #define OTG1_ID_PULLDOWN (1 << 4) 54 #define OTG1_VBUS_DRV (1 << 5) 55 #define OTG1_VBUS_DISCHRG (1 << 6) 56 #define OTG1_VBUS_CHRG (1 << 7) 57 58 #define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */ 59 60 #define OTG_B_SESS_END (1 << 6) 61 #define OTG_B_SESS_VLD (1 << 7) 62 63 #define ISP1301_I2C_INTERRUPT_SOURCE 0x8 64 #define ISP1301_I2C_INTERRUPT_LATCH 0xA 65 #define ISP1301_I2C_INTERRUPT_FALLING 0xC 66 #define ISP1301_I2C_INTERRUPT_RISING 0xE 67 68 #define INT_VBUS_VLD (1 << 0) 69 #define INT_SESS_VLD (1 << 1) 70 #define INT_DP_HI (1 << 2) 71 #define INT_ID_GND (1 << 3) 72 #define INT_DM_HI (1 << 4) 73 #define INT_ID_FLOAT (1 << 5) 74 #define INT_BDIS_ACON (1 << 6) 75 #define INT_CR_INT (1 << 7) 76 77 #define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */ 78 79 struct i2c_client *isp1301_get_client(struct device_node *node); 80 81 #endif /* __LINUX_USB_ISP1301_H */ 82