1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * linux/mdio.h: definitions for MDIO (clause 45) transceivers 4 * Copyright 2006-2009 Solarflare Communications Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 as published 8 * by the Free Software Foundation, incorporated herein by reference. 9 */ 10 11 #ifndef _UAPI__LINUX_MDIO_H__ 12 #define _UAPI__LINUX_MDIO_H__ 13 14 #include <linux/types.h> 15 #include <linux/mii.h> 16 17 /* MDIO Manageable Devices (MMDs). */ 18 #define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ 19 * Physical Medium Dependent */ 20 #define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ 21 #define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ 22 #define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ 23 #define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ 24 #define MDIO_MMD_TC 6 /* Transmission Convergence */ 25 #define MDIO_MMD_AN 7 /* Auto-Negotiation */ 26 #define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ 27 #define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ 28 #define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ 29 30 /* Generic MDIO registers. */ 31 #define MDIO_CTRL1 MII_BMCR 32 #define MDIO_STAT1 MII_BMSR 33 #define MDIO_DEVID1 MII_PHYSID1 34 #define MDIO_DEVID2 MII_PHYSID2 35 #define MDIO_SPEED 4 /* Speed ability */ 36 #define MDIO_DEVS1 5 /* Devices in package */ 37 #define MDIO_DEVS2 6 38 #define MDIO_CTRL2 7 /* 10G control 2 */ 39 #define MDIO_STAT2 8 /* 10G status 2 */ 40 #define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ 41 #define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ 42 #define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ 43 #define MDIO_PKGID1 14 /* Package identifier */ 44 #define MDIO_PKGID2 15 45 #define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ 46 #define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ 47 #define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ 48 #define MDIO_PCS_EEE_ABLE2 21 /* EEE Capability register 2 */ 49 #define MDIO_PMA_NG_EXTABLE 21 /* 2.5G/5G PMA/PMD extended ability */ 50 #define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ 51 #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ 52 #define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ 53 #define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ 54 #define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */ 55 #define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */ 56 #define MDIO_AN_CTRL2 64 /* AN THP bypass request control */ 57 58 /* Media-dependent registers. */ 59 #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ 60 #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ 61 #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. 62 * Lanes B-D are numbered 134-136. */ 63 #define MDIO_PMA_10GBR_FSRT_CSR 147 /* 10GBASE-R fast retrain status and control */ 64 #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ 65 #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ 66 #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ 67 #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ 68 #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ 69 #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ 70 #define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */ 71 #define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ 72 #define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ 73 #define MDIO_PMA_PMD_BT1 18 /* BASE-T1 PMA/PMD extended ability */ 74 #define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */ 75 #define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */ 76 #define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */ 77 #define MDIO_AN_T1_ADV_M 515 /* BASE-T1 AN advertisement register [31:16] */ 78 #define MDIO_AN_T1_ADV_H 516 /* BASE-T1 AN advertisement register [47:32] */ 79 #define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */ 80 #define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */ 81 #define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */ 82 #define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */ 83 84 /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ 85 #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ 86 #define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ 87 #define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ 88 #define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ 89 #define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ 90 #define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ 91 92 /* Control register 1. */ 93 /* Enable extended speed selection */ 94 #define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) 95 /* All speed selection bits */ 96 #define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) 97 #define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX 98 #define MDIO_CTRL1_LPOWER BMCR_PDOWN 99 #define MDIO_CTRL1_RESET BMCR_RESET 100 #define MDIO_PMA_CTRL1_LOOPBACK 0x0001 101 #define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 102 #define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 103 #define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK 104 #define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK 105 #define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART 106 #define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE 107 #define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ 108 #define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ 109 110 /* 10 Gb/s */ 111 #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) 112 /* 10PASS-TS/2BASE-TL */ 113 #define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) 114 /* 2.5 Gb/s */ 115 #define MDIO_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18) 116 /* 5 Gb/s */ 117 #define MDIO_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c) 118 119 /* Status register 1. */ 120 #define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ 121 #define MDIO_STAT1_LSTATUS BMSR_LSTATUS 122 #define MDIO_STAT1_FAULT 0x0080 /* Fault */ 123 #define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ 124 #define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE 125 #define MDIO_AN_STAT1_RFAULT BMSR_RFAULT 126 #define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE 127 #define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ 128 #define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ 129 130 /* Speed register. */ 131 #define MDIO_SPEED_10G 0x0001 /* 10G capable */ 132 #define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ 133 #define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ 134 #define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ 135 #define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ 136 #define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ 137 #define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ 138 #define MDIO_PCS_SPEED_2_5G 0x0040 /* 2.5G capable */ 139 #define MDIO_PCS_SPEED_5G 0x0080 /* 5G capable */ 140 141 /* Device present registers. */ 142 #define MDIO_DEVS_PRESENT(devad) (1 << (devad)) 143 #define MDIO_DEVS_C22PRESENT MDIO_DEVS_PRESENT(0) 144 #define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) 145 #define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) 146 #define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) 147 #define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) 148 #define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) 149 #define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) 150 #define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) 151 #define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) 152 #define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) 153 #define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) 154 155 /* Control register 2. */ 156 #define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ 157 #define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ 158 #define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ 159 #define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ 160 #define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ 161 #define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ 162 #define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ 163 #define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ 164 #define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ 165 #define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ 166 #define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ 167 #define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ 168 #define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ 169 #define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ 170 #define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ 171 #define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ 172 #define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ 173 #define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */ 174 #define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */ 175 #define MDIO_PMA_CTRL2_BASET1 0x003D /* BASE-T1 type */ 176 #define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ 177 #define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ 178 #define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ 179 #define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ 180 #define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ 181 182 /* Status register 2. */ 183 #define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ 184 #define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ 185 #define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ 186 #define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ 187 #define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ 188 #define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ 189 #define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ 190 #define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ 191 #define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ 192 #define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ 193 #define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ 194 #define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ 195 #define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ 196 #define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ 197 #define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ 198 #define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ 199 #define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ 200 #define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ 201 #define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ 202 #define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ 203 #define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ 204 205 /* Transmit disable register. */ 206 #define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ 207 #define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ 208 #define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ 209 #define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ 210 #define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ 211 212 /* Receive signal detect register. */ 213 #define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ 214 #define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ 215 #define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ 216 #define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ 217 #define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ 218 219 /* Extended abilities register. */ 220 #define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ 221 #define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ 222 #define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ 223 #define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ 224 #define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ 225 #define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ 226 #define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ 227 #define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ 228 #define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ 229 #define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */ 230 #define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ 231 232 /* PHY XGXS lane state register. */ 233 #define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 234 #define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 235 #define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 236 #define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 237 #define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 238 239 /* PMA 10GBASE-T pair swap & polarity */ 240 #define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ 241 #define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ 242 #define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ 243 #define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ 244 #define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ 245 #define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ 246 247 /* PMA 10GBASE-T TX power register. */ 248 #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ 249 250 /* PMA 10GBASE-T SNR registers. */ 251 /* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ 252 #define MDIO_PMA_10GBT_SNR_BIAS 0x8000 253 #define MDIO_PMA_10GBT_SNR_MAX 127 254 255 /* PMA 10GBASE-R FEC ability register. */ 256 #define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ 257 #define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ 258 259 /* PMA 10GBASE-R Fast Retrain status and control register. */ 260 #define MDIO_PMA_10GBR_FSRT_ENABLE 0x0001 /* Fast retrain enable */ 261 262 /* PCS 10GBASE-R/-T status register 1. */ 263 #define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ 264 265 /* PCS 10GBASE-R/-T status register 2. */ 266 #define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff 267 #define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 268 269 /* AN 10GBASE-T control register. */ 270 #define MDIO_AN_10GBT_CTRL_ADVFSRT2_5G 0x0020 /* Advertise 2.5GBASE-T fast retrain */ 271 #define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */ 272 #define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */ 273 #define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ 274 275 /* AN 10GBASE-T status register. */ 276 #define MDIO_AN_10GBT_STAT_LP2_5G 0x0020 /* LP is 2.5GBT capable */ 277 #define MDIO_AN_10GBT_STAT_LP5G 0x0040 /* LP is 5GBT capable */ 278 #define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ 279 #define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ 280 #define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ 281 #define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ 282 #define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ 283 #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ 284 #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ 285 286 /* 10BASE-T1L PMA control */ 287 #define MDIO_PMA_10T1L_CTRL_LB_EN 0x0001 /* Enable loopback mode */ 288 #define MDIO_PMA_10T1L_CTRL_EEE_EN 0x0400 /* Enable EEE mode */ 289 #define MDIO_PMA_10T1L_CTRL_LOW_POWER 0x0800 /* Low-power mode */ 290 #define MDIO_PMA_10T1L_CTRL_2V4_EN 0x1000 /* Enable 2.4 Vpp operating mode */ 291 #define MDIO_PMA_10T1L_CTRL_TX_DIS 0x4000 /* Transmit disable */ 292 #define MDIO_PMA_10T1L_CTRL_PMA_RST 0x8000 /* MA reset */ 293 294 /* 10BASE-T1L PMA status register. */ 295 #define MDIO_PMA_10T1L_STAT_LINK 0x0001 /* PMA receive link up */ 296 #define MDIO_PMA_10T1L_STAT_FAULT 0x0002 /* Fault condition detected */ 297 #define MDIO_PMA_10T1L_STAT_POLARITY 0x0004 /* Receive polarity is reversed */ 298 #define MDIO_PMA_10T1L_STAT_RECV_FAULT 0x0200 /* Able to detect fault on receive path */ 299 #define MDIO_PMA_10T1L_STAT_EEE 0x0400 /* PHY has EEE ability */ 300 #define MDIO_PMA_10T1L_STAT_LOW_POWER 0x0800 /* PMA has low-power ability */ 301 #define MDIO_PMA_10T1L_STAT_2V4_ABLE 0x1000 /* PHY has 2.4 Vpp operating mode ability */ 302 #define MDIO_PMA_10T1L_STAT_LB_ABLE 0x2000 /* PHY has loopback ability */ 303 304 /* 10BASE-T1L PCS control register. */ 305 #define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ 306 #define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ 307 308 /* BASE-T1 PMA/PMD extended ability register. */ 309 #define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */ 310 311 /* BASE-T1 auto-negotiation advertisement register [15:0] */ 312 #define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP 313 #define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM 314 #define MDIO_AN_T1_ADV_L_FORCE_MS 0x1000 /* Force Master/slave Configuration */ 315 #define MDIO_AN_T1_ADV_L_REMOTE_FAULT ADVERTISE_RFAULT 316 #define MDIO_AN_T1_ADV_L_ACK ADVERTISE_LPACK 317 #define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ ADVERTISE_NPAGE 318 319 /* BASE-T1 auto-negotiation advertisement register [31:16] */ 320 #define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */ 321 #define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */ 322 323 /* BASE-T1 auto-negotiation advertisement register [47:32] */ 324 #define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level Transmit Request */ 325 #define MDIO_AN_T1_ADV_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level Transmit Ability */ 326 327 /* BASE-T1 AN LP Base Page ability register [15:0] */ 328 #define MDIO_AN_T1_LP_L_PAUSE_CAP LPA_PAUSE_CAP 329 #define MDIO_AN_T1_LP_L_PAUSE_ASYM LPA_PAUSE_ASYM 330 #define MDIO_AN_T1_LP_L_FORCE_MS 0x1000 /* LP Force Master/slave Configuration */ 331 #define MDIO_AN_T1_LP_L_REMOTE_FAULT LPA_RFAULT 332 #define MDIO_AN_T1_LP_L_ACK LPA_LPACK 333 #define MDIO_AN_T1_LP_L_NEXT_PAGE_REQ LPA_NPAGE 334 335 /* BASE-T1 AN LP Base Page ability register [31:16] */ 336 #define MDIO_AN_T1_LP_M_MST 0x0010 /* LP master preference */ 337 #define MDIO_AN_T1_LP_M_B10L 0x4000 /* LP is compatible with 10BASE-T1L */ 338 339 /* BASE-T1 AN LP Base Page ability register [47:32] */ 340 #define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */ 341 #define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */ 342 343 /* BASE-T1 PMA/PMD control register */ 344 #define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */ 345 346 /* EEE Supported/Advertisement/LP Advertisement registers. 347 * 348 * EEE capability Register (3.20), Advertisement (7.60) and 349 * Link partner ability (7.61) registers have and can use the same identical 350 * bit masks. 351 */ 352 #define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ 353 #define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ 354 /* Note: the two defines above can be potentially used by the user-land 355 * and cannot remove them now. 356 * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros 357 * using the previous ones (that can be considered obsolete). 358 */ 359 #define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ 360 #define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ 361 #define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ 362 #define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ 363 #define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ 364 #define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ 365 #define MDIO_EEE_40GR_FW 0x0100 /* 40G R fast wake */ 366 #define MDIO_EEE_40GR_DS 0x0200 /* 40G R deep sleep */ 367 #define MDIO_EEE_100GR_FW 0x1000 /* 100G R fast wake */ 368 #define MDIO_EEE_100GR_DS 0x2000 /* 100G R deep sleep */ 369 370 #define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */ 371 #define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */ 372 373 /* AN MultiGBASE-T AN control 2 */ 374 #define MDIO_AN_THP_BP2_5GT 0x0008 /* 2.5GT THP bypass request */ 375 376 /* 2.5G/5G Extended abilities register. */ 377 #define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */ 378 #define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */ 379 380 /* LASI RX_ALARM control/status registers. */ 381 #define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ 382 #define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ 383 #define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ 384 #define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ 385 #define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ 386 387 /* LASI TX_ALARM control/status registers. */ 388 #define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ 389 #define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ 390 #define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ 391 #define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ 392 #define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ 393 #define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ 394 395 /* LASI control/status registers. */ 396 #define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ 397 #define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ 398 #define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ 399 400 /* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ 401 402 #define MDIO_PHY_ID_C45 0x8000 403 #define MDIO_PHY_ID_PRTAD 0x03e0 404 #define MDIO_PHY_ID_DEVAD 0x001f 405 #define MDIO_PHY_ID_C45_MASK \ 406 (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) 407 408 static inline __u16 mdio_phy_id_c45(int prtad, int devad) 409 { 410 return MDIO_PHY_ID_C45 | (prtad << 5) | devad; 411 } 412 413 /* UsxgmiiChannelInfo[15:0] for USXGMII in-band auto-negotiation.*/ 414 #define MDIO_USXGMII_EEE_CLK_STP 0x0080 /* EEE clock stop supported */ 415 #define MDIO_USXGMII_EEE 0x0100 /* EEE supported */ 416 #define MDIO_USXGMII_SPD_MASK 0x0e00 /* USXGMII speed mask */ 417 #define MDIO_USXGMII_FULL_DUPLEX 0x1000 /* USXGMII full duplex */ 418 #define MDIO_USXGMII_DPX_SPD_MASK 0x1e00 /* USXGMII duplex and speed bits */ 419 #define MDIO_USXGMII_10 0x0000 /* 10Mbps */ 420 #define MDIO_USXGMII_10HALF 0x0000 /* 10Mbps half-duplex */ 421 #define MDIO_USXGMII_10FULL 0x1000 /* 10Mbps full-duplex */ 422 #define MDIO_USXGMII_100 0x0200 /* 100Mbps */ 423 #define MDIO_USXGMII_100HALF 0x0200 /* 100Mbps half-duplex */ 424 #define MDIO_USXGMII_100FULL 0x1200 /* 100Mbps full-duplex */ 425 #define MDIO_USXGMII_1000 0x0400 /* 1000Mbps */ 426 #define MDIO_USXGMII_1000HALF 0x0400 /* 1000Mbps half-duplex */ 427 #define MDIO_USXGMII_1000FULL 0x1400 /* 1000Mbps full-duplex */ 428 #define MDIO_USXGMII_10G 0x0600 /* 10Gbps */ 429 #define MDIO_USXGMII_10GHALF 0x0600 /* 10Gbps half-duplex */ 430 #define MDIO_USXGMII_10GFULL 0x1600 /* 10Gbps full-duplex */ 431 #define MDIO_USXGMII_2500 0x0800 /* 2500Mbps */ 432 #define MDIO_USXGMII_2500HALF 0x0800 /* 2500Mbps half-duplex */ 433 #define MDIO_USXGMII_2500FULL 0x1800 /* 2500Mbps full-duplex */ 434 #define MDIO_USXGMII_5000 0x0a00 /* 5000Mbps */ 435 #define MDIO_USXGMII_5000HALF 0x0a00 /* 5000Mbps half-duplex */ 436 #define MDIO_USXGMII_5000FULL 0x1a00 /* 5000Mbps full-duplex */ 437 #define MDIO_USXGMII_LINK 0x8000 /* PHY link with copper-side partner */ 438 439 #endif /* _UAPI__LINUX_MDIO_H__ */ 440