xref: /linux/net/mac80211/agg-tx.c (revision 44f57d78)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * HT handling
4  *
5  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
6  * Copyright 2002-2005, Instant802 Networks, Inc.
7  * Copyright 2005-2006, Devicescape Software, Inc.
8  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
9  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
10  * Copyright 2007-2010, Intel Corporation
11  * Copyright(c) 2015-2017 Intel Deutschland GmbH
12  * Copyright (C) 2018 - 2019 Intel Corporation
13  */
14 
15 #include <linux/ieee80211.h>
16 #include <linux/slab.h>
17 #include <linux/export.h>
18 #include <net/mac80211.h>
19 #include "ieee80211_i.h"
20 #include "driver-ops.h"
21 #include "wme.h"
22 
23 /**
24  * DOC: TX A-MPDU aggregation
25  *
26  * Aggregation on the TX side requires setting the hardware flag
27  * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
28  * packets with a flag indicating A-MPDU aggregation. The driver
29  * or device is responsible for actually aggregating the frames,
30  * as well as deciding how many and which to aggregate.
31  *
32  * When TX aggregation is started by some subsystem (usually the rate
33  * control algorithm would be appropriate) by calling the
34  * ieee80211_start_tx_ba_session() function, the driver will be
35  * notified via its @ampdu_action function, with the
36  * %IEEE80211_AMPDU_TX_START action.
37  *
38  * In response to that, the driver is later required to call the
39  * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
40  * start the aggregation session after the peer has also responded.
41  * If the peer responds negatively, the session will be stopped
42  * again right away. Note that it is possible for the aggregation
43  * session to be stopped before the driver has indicated that it
44  * is done setting it up, in which case it must not indicate the
45  * setup completion.
46  *
47  * Also note that, since we also need to wait for a response from
48  * the peer, the driver is notified of the completion of the
49  * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
50  * @ampdu_action callback.
51  *
52  * Similarly, when the aggregation session is stopped by the peer
53  * or something calling ieee80211_stop_tx_ba_session(), the driver's
54  * @ampdu_action function will be called with the action
55  * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
56  * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
57  * Note that the sta can get destroyed before the BA tear down is
58  * complete.
59  */
60 
61 static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
62 					 const u8 *da, u16 tid,
63 					 u8 dialog_token, u16 start_seq_num,
64 					 u16 agg_size, u16 timeout)
65 {
66 	struct ieee80211_local *local = sdata->local;
67 	struct sk_buff *skb;
68 	struct ieee80211_mgmt *mgmt;
69 	u16 capab;
70 
71 	skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
72 
73 	if (!skb)
74 		return;
75 
76 	skb_reserve(skb, local->hw.extra_tx_headroom);
77 	mgmt = skb_put_zero(skb, 24);
78 	memcpy(mgmt->da, da, ETH_ALEN);
79 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
80 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
81 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
82 	    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
83 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
84 	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
85 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
86 	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
87 		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
88 
89 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
90 					  IEEE80211_STYPE_ACTION);
91 
92 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
93 
94 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
95 	mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
96 
97 	mgmt->u.action.u.addba_req.dialog_token = dialog_token;
98 	capab = (u16)(1 << 0);		/* bit 0 A-MSDU support */
99 	capab |= (u16)(1 << 1);		/* bit 1 aggregation policy */
100 	capab |= (u16)(tid << 2); 	/* bit 5:2 TID number */
101 	capab |= (u16)(agg_size << 6);	/* bit 15:6 max size of aggergation */
102 
103 	mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab);
104 
105 	mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout);
106 	mgmt->u.action.u.addba_req.start_seq_num =
107 					cpu_to_le16(start_seq_num << 4);
108 
109 	ieee80211_tx_skb(sdata, skb);
110 }
111 
112 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
113 {
114 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
115 	struct ieee80211_local *local = sdata->local;
116 	struct sk_buff *skb;
117 	struct ieee80211_bar *bar;
118 	u16 bar_control = 0;
119 
120 	skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
121 	if (!skb)
122 		return;
123 
124 	skb_reserve(skb, local->hw.extra_tx_headroom);
125 	bar = skb_put_zero(skb, sizeof(*bar));
126 	bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
127 					 IEEE80211_STYPE_BACK_REQ);
128 	memcpy(bar->ra, ra, ETH_ALEN);
129 	memcpy(bar->ta, sdata->vif.addr, ETH_ALEN);
130 	bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
131 	bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
132 	bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT);
133 	bar->control = cpu_to_le16(bar_control);
134 	bar->start_seq_num = cpu_to_le16(ssn);
135 
136 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
137 					IEEE80211_TX_CTL_REQ_TX_STATUS;
138 	ieee80211_tx_skb_tid(sdata, skb, tid);
139 }
140 EXPORT_SYMBOL(ieee80211_send_bar);
141 
142 void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
143 			     struct tid_ampdu_tx *tid_tx)
144 {
145 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
146 	lockdep_assert_held(&sta->lock);
147 	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
148 }
149 
150 /*
151  * When multiple aggregation sessions on multiple stations
152  * are being created/destroyed simultaneously, we need to
153  * refcount the global queue stop caused by that in order
154  * to not get into a situation where one of the aggregation
155  * setup or teardown re-enables queues before the other is
156  * ready to handle that.
157  *
158  * These two functions take care of this issue by keeping
159  * a global "agg_queue_stop" refcount.
160  */
161 static void __acquires(agg_queue)
162 ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
163 {
164 	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
165 
166 	/* we do refcounting here, so don't use the queue reason refcounting */
167 
168 	if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1)
169 		ieee80211_stop_queue_by_reason(
170 			&sdata->local->hw, queue,
171 			IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
172 			false);
173 	__acquire(agg_queue);
174 }
175 
176 static void __releases(agg_queue)
177 ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
178 {
179 	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
180 
181 	if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0)
182 		ieee80211_wake_queue_by_reason(
183 			&sdata->local->hw, queue,
184 			IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
185 			false);
186 	__release(agg_queue);
187 }
188 
189 static void
190 ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
191 {
192 	struct ieee80211_txq *txq = sta->sta.txq[tid];
193 	struct ieee80211_sub_if_data *sdata;
194 	struct fq *fq;
195 	struct txq_info *txqi;
196 
197 	if (!txq)
198 		return;
199 
200 	txqi = to_txq_info(txq);
201 	sdata = vif_to_sdata(txq->vif);
202 	fq = &sdata->local->fq;
203 
204 	/* Lock here to protect against further seqno updates on dequeue */
205 	spin_lock_bh(&fq->lock);
206 	set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
207 	spin_unlock_bh(&fq->lock);
208 }
209 
210 static void
211 ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
212 {
213 	struct ieee80211_txq *txq = sta->sta.txq[tid];
214 	struct txq_info *txqi;
215 
216 	if (!txq)
217 		return;
218 
219 	txqi = to_txq_info(txq);
220 
221 	if (enable)
222 		set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
223 	else
224 		clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
225 
226 	clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
227 	local_bh_disable();
228 	rcu_read_lock();
229 	schedule_and_wake_txq(sta->sdata->local, txqi);
230 	rcu_read_unlock();
231 	local_bh_enable();
232 }
233 
234 /*
235  * splice packets from the STA's pending to the local pending,
236  * requires a call to ieee80211_agg_splice_finish later
237  */
238 static void __acquires(agg_queue)
239 ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
240 			     struct tid_ampdu_tx *tid_tx, u16 tid)
241 {
242 	struct ieee80211_local *local = sdata->local;
243 	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
244 	unsigned long flags;
245 
246 	ieee80211_stop_queue_agg(sdata, tid);
247 
248 	if (WARN(!tid_tx,
249 		 "TID %d gone but expected when splicing aggregates from the pending queue\n",
250 		 tid))
251 		return;
252 
253 	if (!skb_queue_empty(&tid_tx->pending)) {
254 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
255 		/* copy over remaining packets */
256 		skb_queue_splice_tail_init(&tid_tx->pending,
257 					   &local->pending[queue]);
258 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
259 	}
260 }
261 
262 static void __releases(agg_queue)
263 ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid)
264 {
265 	ieee80211_wake_queue_agg(sdata, tid);
266 }
267 
268 static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
269 {
270 	struct tid_ampdu_tx *tid_tx;
271 
272 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
273 	lockdep_assert_held(&sta->lock);
274 
275 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
276 
277 	/*
278 	 * When we get here, the TX path will not be lockless any more wrt.
279 	 * aggregation, since the OPERATIONAL bit has long been cleared.
280 	 * Thus it will block on getting the lock, if it occurs. So if we
281 	 * stop the queue now, we will not get any more packets, and any
282 	 * that might be being processed will wait for us here, thereby
283 	 * guaranteeing that no packets go to the tid_tx pending queue any
284 	 * more.
285 	 */
286 
287 	ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
288 
289 	/* future packets must not find the tid_tx struct any more */
290 	ieee80211_assign_tid_tx(sta, tid, NULL);
291 
292 	ieee80211_agg_splice_finish(sta->sdata, tid);
293 	ieee80211_agg_start_txq(sta, tid, false);
294 
295 	kfree_rcu(tid_tx, rcu_head);
296 }
297 
298 int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
299 				    enum ieee80211_agg_stop_reason reason)
300 {
301 	struct ieee80211_local *local = sta->local;
302 	struct tid_ampdu_tx *tid_tx;
303 	struct ieee80211_ampdu_params params = {
304 		.sta = &sta->sta,
305 		.tid = tid,
306 		.buf_size = 0,
307 		.amsdu = false,
308 		.timeout = 0,
309 		.ssn = 0,
310 	};
311 	int ret;
312 
313 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
314 
315 	switch (reason) {
316 	case AGG_STOP_DECLINED:
317 	case AGG_STOP_LOCAL_REQUEST:
318 	case AGG_STOP_PEER_REQUEST:
319 		params.action = IEEE80211_AMPDU_TX_STOP_CONT;
320 		break;
321 	case AGG_STOP_DESTROY_STA:
322 		params.action = IEEE80211_AMPDU_TX_STOP_FLUSH;
323 		break;
324 	default:
325 		WARN_ON_ONCE(1);
326 		return -EINVAL;
327 	}
328 
329 	spin_lock_bh(&sta->lock);
330 
331 	/* free struct pending for start, if present */
332 	tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
333 	kfree(tid_tx);
334 	sta->ampdu_mlme.tid_start_tx[tid] = NULL;
335 
336 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
337 	if (!tid_tx) {
338 		spin_unlock_bh(&sta->lock);
339 		return -ENOENT;
340 	}
341 
342 	/*
343 	 * if we're already stopping ignore any new requests to stop
344 	 * unless we're destroying it in which case notify the driver
345 	 */
346 	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
347 		spin_unlock_bh(&sta->lock);
348 		if (reason != AGG_STOP_DESTROY_STA)
349 			return -EALREADY;
350 		params.action = IEEE80211_AMPDU_TX_STOP_FLUSH_CONT;
351 		ret = drv_ampdu_action(local, sta->sdata, &params);
352 		WARN_ON_ONCE(ret);
353 		return 0;
354 	}
355 
356 	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
357 		/* not even started yet! */
358 		ieee80211_assign_tid_tx(sta, tid, NULL);
359 		spin_unlock_bh(&sta->lock);
360 		kfree_rcu(tid_tx, rcu_head);
361 		return 0;
362 	}
363 
364 	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
365 
366 	ieee80211_agg_stop_txq(sta, tid);
367 
368 	spin_unlock_bh(&sta->lock);
369 
370 	ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
371 	       sta->sta.addr, tid);
372 
373 	del_timer_sync(&tid_tx->addba_resp_timer);
374 	del_timer_sync(&tid_tx->session_timer);
375 
376 	/*
377 	 * After this packets are no longer handed right through
378 	 * to the driver but are put onto tid_tx->pending instead,
379 	 * with locking to ensure proper access.
380 	 */
381 	clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
382 
383 	/*
384 	 * There might be a few packets being processed right now (on
385 	 * another CPU) that have already gotten past the aggregation
386 	 * check when it was still OPERATIONAL and consequently have
387 	 * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
388 	 * call into the driver at the same time or even before the
389 	 * TX paths calls into it, which could confuse the driver.
390 	 *
391 	 * Wait for all currently running TX paths to finish before
392 	 * telling the driver. New packets will not go through since
393 	 * the aggregation session is no longer OPERATIONAL.
394 	 */
395 	if (!local->in_reconfig)
396 		synchronize_net();
397 
398 	tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ?
399 					WLAN_BACK_RECIPIENT :
400 					WLAN_BACK_INITIATOR;
401 	tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST;
402 
403 	ret = drv_ampdu_action(local, sta->sdata, &params);
404 
405 	/* HW shall not deny going back to legacy */
406 	if (WARN_ON(ret)) {
407 		/*
408 		 * We may have pending packets get stuck in this case...
409 		 * Not bothering with a workaround for now.
410 		 */
411 	}
412 
413 	/*
414 	 * In the case of AGG_STOP_DESTROY_STA, the driver won't
415 	 * necessarily call ieee80211_stop_tx_ba_cb(), so this may
416 	 * seem like we can leave the tid_tx data pending forever.
417 	 * This is true, in a way, but "forever" is only until the
418 	 * station struct is actually destroyed. In the meantime,
419 	 * leaving it around ensures that we don't transmit packets
420 	 * to the driver on this TID which might confuse it.
421 	 */
422 
423 	return 0;
424 }
425 
426 /*
427  * After sending add Block Ack request we activated a timer until
428  * add Block Ack response will arrive from the recipient.
429  * If this timer expires sta_addba_resp_timer_expired will be executed.
430  */
431 static void sta_addba_resp_timer_expired(struct timer_list *t)
432 {
433 	struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, addba_resp_timer);
434 	struct sta_info *sta = tid_tx->sta;
435 	u8 tid = tid_tx->tid;
436 
437 	/* check if the TID waits for addBA response */
438 	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
439 		ht_dbg(sta->sdata,
440 		       "timer expired on %pM tid %d not expecting addBA response\n",
441 		       sta->sta.addr, tid);
442 		return;
443 	}
444 
445 	ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
446 	       sta->sta.addr, tid);
447 
448 	ieee80211_stop_tx_ba_session(&sta->sta, tid);
449 }
450 
451 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
452 {
453 	struct tid_ampdu_tx *tid_tx;
454 	struct ieee80211_local *local = sta->local;
455 	struct ieee80211_sub_if_data *sdata = sta->sdata;
456 	struct ieee80211_ampdu_params params = {
457 		.sta = &sta->sta,
458 		.action = IEEE80211_AMPDU_TX_START,
459 		.tid = tid,
460 		.buf_size = 0,
461 		.amsdu = false,
462 		.timeout = 0,
463 	};
464 	int ret;
465 	u16 buf_size;
466 
467 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
468 
469 	/*
470 	 * Start queuing up packets for this aggregation session.
471 	 * We're going to release them once the driver is OK with
472 	 * that.
473 	 */
474 	clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
475 
476 	ieee80211_agg_stop_txq(sta, tid);
477 
478 	/*
479 	 * Make sure no packets are being processed. This ensures that
480 	 * we have a valid starting sequence number and that in-flight
481 	 * packets have been flushed out and no packets for this TID
482 	 * will go into the driver during the ampdu_action call.
483 	 */
484 	synchronize_net();
485 
486 	params.ssn = sta->tid_seq[tid] >> 4;
487 	ret = drv_ampdu_action(local, sdata, &params);
488 	if (ret) {
489 		ht_dbg(sdata,
490 		       "BA request denied - HW unavailable for %pM tid %d\n",
491 		       sta->sta.addr, tid);
492 		spin_lock_bh(&sta->lock);
493 		ieee80211_agg_splice_packets(sdata, tid_tx, tid);
494 		ieee80211_assign_tid_tx(sta, tid, NULL);
495 		ieee80211_agg_splice_finish(sdata, tid);
496 		spin_unlock_bh(&sta->lock);
497 
498 		ieee80211_agg_start_txq(sta, tid, false);
499 
500 		kfree_rcu(tid_tx, rcu_head);
501 		return;
502 	}
503 
504 	/* activate the timer for the recipient's addBA response */
505 	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
506 	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
507 	       sta->sta.addr, tid);
508 
509 	spin_lock_bh(&sta->lock);
510 	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
511 	sta->ampdu_mlme.addba_req_num[tid]++;
512 	spin_unlock_bh(&sta->lock);
513 
514 	if (sta->sta.he_cap.has_he) {
515 		buf_size = local->hw.max_tx_aggregation_subframes;
516 	} else {
517 		/*
518 		 * We really should use what the driver told us it will
519 		 * transmit as the maximum, but certain APs (e.g. the
520 		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
521 		 * will crash when we use a lower number.
522 		 */
523 		buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
524 	}
525 
526 	/* send AddBA request */
527 	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
528 				     tid_tx->dialog_token, params.ssn,
529 				     buf_size, tid_tx->timeout);
530 }
531 
532 /*
533  * After accepting the AddBA Response we activated a timer,
534  * resetting it after each frame that we send.
535  */
536 static void sta_tx_agg_session_timer_expired(struct timer_list *t)
537 {
538 	struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, session_timer);
539 	struct sta_info *sta = tid_tx->sta;
540 	u8 tid = tid_tx->tid;
541 	unsigned long timeout;
542 
543 	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
544 		return;
545 	}
546 
547 	timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout);
548 	if (time_is_after_jiffies(timeout)) {
549 		mod_timer(&tid_tx->session_timer, timeout);
550 		return;
551 	}
552 
553 	ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
554 	       sta->sta.addr, tid);
555 
556 	ieee80211_stop_tx_ba_session(&sta->sta, tid);
557 }
558 
559 int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
560 				  u16 timeout)
561 {
562 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
563 	struct ieee80211_sub_if_data *sdata = sta->sdata;
564 	struct ieee80211_local *local = sdata->local;
565 	struct tid_ampdu_tx *tid_tx;
566 	int ret = 0;
567 
568 	trace_api_start_tx_ba_session(pubsta, tid);
569 
570 	if (WARN(sta->reserved_tid == tid,
571 		 "Requested to start BA session on reserved tid=%d", tid))
572 		return -EINVAL;
573 
574 	if (!pubsta->ht_cap.ht_supported)
575 		return -EINVAL;
576 
577 	if (WARN_ON_ONCE(!local->ops->ampdu_action))
578 		return -EINVAL;
579 
580 	if ((tid >= IEEE80211_NUM_TIDS) ||
581 	    !ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) ||
582 	    ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW))
583 		return -EINVAL;
584 
585 	if (WARN_ON(tid >= IEEE80211_FIRST_TSPEC_TSID))
586 		return -EINVAL;
587 
588 	ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
589 	       pubsta->addr, tid);
590 
591 	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
592 	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
593 	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
594 	    sdata->vif.type != NL80211_IFTYPE_AP &&
595 	    sdata->vif.type != NL80211_IFTYPE_ADHOC)
596 		return -EINVAL;
597 
598 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
599 		ht_dbg(sdata,
600 		       "BA sessions blocked - Denying BA session request %pM tid %d\n",
601 		       sta->sta.addr, tid);
602 		return -EINVAL;
603 	}
604 
605 	/*
606 	 * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
607 	 * member of an IBSS, and has no other existing Block Ack agreement
608 	 * with the recipient STA, then the initiating STA shall transmit a
609 	 * Probe Request frame to the recipient STA and shall not transmit an
610 	 * ADDBA Request frame unless it receives a Probe Response frame
611 	 * from the recipient within dot11ADDBAFailureTimeout.
612 	 *
613 	 * The probe request mechanism for ADDBA is currently not implemented,
614 	 * but we only build up Block Ack session with HT STAs. This information
615 	 * is set when we receive a bss info from a probe response or a beacon.
616 	 */
617 	if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
618 	    !sta->sta.ht_cap.ht_supported) {
619 		ht_dbg(sdata,
620 		       "BA request denied - IBSS STA %pM does not advertise HT support\n",
621 		       pubsta->addr);
622 		return -EINVAL;
623 	}
624 
625 	spin_lock_bh(&sta->lock);
626 
627 	/* we have tried too many times, receiver does not want A-MPDU */
628 	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
629 		ret = -EBUSY;
630 		goto err_unlock_sta;
631 	}
632 
633 	/*
634 	 * if we have tried more than HT_AGG_BURST_RETRIES times we
635 	 * will spread our requests in time to avoid stalling connection
636 	 * for too long
637 	 */
638 	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
639 	    time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
640 			HT_AGG_RETRIES_PERIOD)) {
641 		ht_dbg(sdata,
642 		       "BA request denied - %d failed requests on %pM tid %u\n",
643 		       sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
644 		ret = -EBUSY;
645 		goto err_unlock_sta;
646 	}
647 
648 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
649 	/* check if the TID is not in aggregation flow already */
650 	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
651 		ht_dbg(sdata,
652 		       "BA request denied - session is not idle on %pM tid %u\n",
653 		       sta->sta.addr, tid);
654 		ret = -EAGAIN;
655 		goto err_unlock_sta;
656 	}
657 
658 	/* prepare A-MPDU MLME for Tx aggregation */
659 	tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
660 	if (!tid_tx) {
661 		ret = -ENOMEM;
662 		goto err_unlock_sta;
663 	}
664 
665 	skb_queue_head_init(&tid_tx->pending);
666 	__set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
667 
668 	tid_tx->timeout = timeout;
669 	tid_tx->sta = sta;
670 	tid_tx->tid = tid;
671 
672 	/* response timer */
673 	timer_setup(&tid_tx->addba_resp_timer, sta_addba_resp_timer_expired, 0);
674 
675 	/* tx timer */
676 	timer_setup(&tid_tx->session_timer,
677 		    sta_tx_agg_session_timer_expired, TIMER_DEFERRABLE);
678 
679 	/* assign a dialog token */
680 	sta->ampdu_mlme.dialog_token_allocator++;
681 	tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
682 
683 	/*
684 	 * Finally, assign it to the start array; the work item will
685 	 * collect it and move it to the normal array.
686 	 */
687 	sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
688 
689 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
690 
691 	/* this flow continues off the work */
692  err_unlock_sta:
693 	spin_unlock_bh(&sta->lock);
694 	return ret;
695 }
696 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
697 
698 static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
699 					 struct sta_info *sta, u16 tid)
700 {
701 	struct tid_ampdu_tx *tid_tx;
702 	struct ieee80211_ampdu_params params = {
703 		.sta = &sta->sta,
704 		.action = IEEE80211_AMPDU_TX_OPERATIONAL,
705 		.tid = tid,
706 		.timeout = 0,
707 		.ssn = 0,
708 	};
709 
710 	lockdep_assert_held(&sta->ampdu_mlme.mtx);
711 
712 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
713 	params.buf_size = tid_tx->buf_size;
714 	params.amsdu = tid_tx->amsdu;
715 
716 	ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
717 	       sta->sta.addr, tid);
718 
719 	drv_ampdu_action(local, sta->sdata, &params);
720 
721 	/*
722 	 * synchronize with TX path, while splicing the TX path
723 	 * should block so it won't put more packets onto pending.
724 	 */
725 	spin_lock_bh(&sta->lock);
726 
727 	ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
728 	/*
729 	 * Now mark as operational. This will be visible
730 	 * in the TX path, and lets it go lock-free in
731 	 * the common case.
732 	 */
733 	set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
734 	ieee80211_agg_splice_finish(sta->sdata, tid);
735 
736 	spin_unlock_bh(&sta->lock);
737 
738 	ieee80211_agg_start_txq(sta, tid, true);
739 }
740 
741 void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid,
742 			      struct tid_ampdu_tx *tid_tx)
743 {
744 	struct ieee80211_sub_if_data *sdata = sta->sdata;
745 	struct ieee80211_local *local = sdata->local;
746 
747 	if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
748 		return;
749 
750 	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
751 		ieee80211_agg_tx_operational(local, sta, tid);
752 }
753 
754 static struct tid_ampdu_tx *
755 ieee80211_lookup_tid_tx(struct ieee80211_sub_if_data *sdata,
756 			const u8 *ra, u16 tid, struct sta_info **sta)
757 {
758 	struct tid_ampdu_tx *tid_tx;
759 
760 	if (tid >= IEEE80211_NUM_TIDS) {
761 		ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
762 		       tid, IEEE80211_NUM_TIDS);
763 		return NULL;
764 	}
765 
766 	*sta = sta_info_get_bss(sdata, ra);
767 	if (!*sta) {
768 		ht_dbg(sdata, "Could not find station: %pM\n", ra);
769 		return NULL;
770 	}
771 
772 	tid_tx = rcu_dereference((*sta)->ampdu_mlme.tid_tx[tid]);
773 
774 	if (WARN_ON(!tid_tx))
775 		ht_dbg(sdata, "addBA was not requested!\n");
776 
777 	return tid_tx;
778 }
779 
780 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
781 				      const u8 *ra, u16 tid)
782 {
783 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
784 	struct ieee80211_local *local = sdata->local;
785 	struct sta_info *sta;
786 	struct tid_ampdu_tx *tid_tx;
787 
788 	trace_api_start_tx_ba_cb(sdata, ra, tid);
789 
790 	rcu_read_lock();
791 	tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
792 	if (!tid_tx)
793 		goto out;
794 
795 	set_bit(HT_AGG_STATE_START_CB, &tid_tx->state);
796 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
797  out:
798 	rcu_read_unlock();
799 }
800 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
801 
802 int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
803 				   enum ieee80211_agg_stop_reason reason)
804 {
805 	int ret;
806 
807 	mutex_lock(&sta->ampdu_mlme.mtx);
808 
809 	ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason);
810 
811 	mutex_unlock(&sta->ampdu_mlme.mtx);
812 
813 	return ret;
814 }
815 
816 int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
817 {
818 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
819 	struct ieee80211_sub_if_data *sdata = sta->sdata;
820 	struct ieee80211_local *local = sdata->local;
821 	struct tid_ampdu_tx *tid_tx;
822 	int ret = 0;
823 
824 	trace_api_stop_tx_ba_session(pubsta, tid);
825 
826 	if (!local->ops->ampdu_action)
827 		return -EINVAL;
828 
829 	if (tid >= IEEE80211_NUM_TIDS)
830 		return -EINVAL;
831 
832 	spin_lock_bh(&sta->lock);
833 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
834 
835 	if (!tid_tx) {
836 		ret = -ENOENT;
837 		goto unlock;
838 	}
839 
840 	WARN(sta->reserved_tid == tid,
841 	     "Requested to stop BA session on reserved tid=%d", tid);
842 
843 	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
844 		/* already in progress stopping it */
845 		ret = 0;
846 		goto unlock;
847 	}
848 
849 	set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
850 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
851 
852  unlock:
853 	spin_unlock_bh(&sta->lock);
854 	return ret;
855 }
856 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
857 
858 void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
859 			     struct tid_ampdu_tx *tid_tx)
860 {
861 	struct ieee80211_sub_if_data *sdata = sta->sdata;
862 	bool send_delba = false;
863 
864 	ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n",
865 	       sta->sta.addr, tid);
866 
867 	spin_lock_bh(&sta->lock);
868 
869 	if (!test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
870 		ht_dbg(sdata,
871 		       "unexpected callback to A-MPDU stop for %pM tid %d\n",
872 		       sta->sta.addr, tid);
873 		goto unlock_sta;
874 	}
875 
876 	if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop)
877 		send_delba = true;
878 
879 	ieee80211_remove_tid_tx(sta, tid);
880 
881  unlock_sta:
882 	spin_unlock_bh(&sta->lock);
883 
884 	if (send_delba)
885 		ieee80211_send_delba(sdata, sta->sta.addr, tid,
886 			WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
887 }
888 
889 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
890 				     const u8 *ra, u16 tid)
891 {
892 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
893 	struct ieee80211_local *local = sdata->local;
894 	struct sta_info *sta;
895 	struct tid_ampdu_tx *tid_tx;
896 
897 	trace_api_stop_tx_ba_cb(sdata, ra, tid);
898 
899 	rcu_read_lock();
900 	tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
901 	if (!tid_tx)
902 		goto out;
903 
904 	set_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state);
905 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
906  out:
907 	rcu_read_unlock();
908 }
909 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
910 
911 
912 void ieee80211_process_addba_resp(struct ieee80211_local *local,
913 				  struct sta_info *sta,
914 				  struct ieee80211_mgmt *mgmt,
915 				  size_t len)
916 {
917 	struct tid_ampdu_tx *tid_tx;
918 	struct ieee80211_txq *txq;
919 	u16 capab, tid, buf_size;
920 	bool amsdu;
921 
922 	capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
923 	amsdu = capab & IEEE80211_ADDBA_PARAM_AMSDU_MASK;
924 	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
925 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
926 	buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
927 
928 	txq = sta->sta.txq[tid];
929 	if (!amsdu && txq)
930 		set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags);
931 
932 	mutex_lock(&sta->ampdu_mlme.mtx);
933 
934 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
935 	if (!tid_tx)
936 		goto out;
937 
938 	if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
939 		ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
940 		       sta->sta.addr, tid);
941 		goto out;
942 	}
943 
944 	del_timer_sync(&tid_tx->addba_resp_timer);
945 
946 	ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
947 	       sta->sta.addr, tid);
948 
949 	/*
950 	 * addba_resp_timer may have fired before we got here, and
951 	 * caused WANT_STOP to be set. If the stop then was already
952 	 * processed further, STOPPING might be set.
953 	 */
954 	if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
955 	    test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
956 		ht_dbg(sta->sdata,
957 		       "got addBA resp for %pM tid %d but we already gave up\n",
958 		       sta->sta.addr, tid);
959 		goto out;
960 	}
961 
962 	/*
963 	 * IEEE 802.11-2007 7.3.1.14:
964 	 * In an ADDBA Response frame, when the Status Code field
965 	 * is set to 0, the Buffer Size subfield is set to a value
966 	 * of at least 1.
967 	 */
968 	if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
969 			== WLAN_STATUS_SUCCESS && buf_size) {
970 		if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
971 				     &tid_tx->state)) {
972 			/* ignore duplicate response */
973 			goto out;
974 		}
975 
976 		tid_tx->buf_size = buf_size;
977 		tid_tx->amsdu = amsdu;
978 
979 		if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
980 			ieee80211_agg_tx_operational(local, sta, tid);
981 
982 		sta->ampdu_mlme.addba_req_num[tid] = 0;
983 
984 		tid_tx->timeout =
985 			le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
986 
987 		if (tid_tx->timeout) {
988 			mod_timer(&tid_tx->session_timer,
989 				  TU_TO_EXP_TIME(tid_tx->timeout));
990 			tid_tx->last_tx = jiffies;
991 		}
992 
993 	} else {
994 		___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED);
995 	}
996 
997  out:
998 	mutex_unlock(&sta->ampdu_mlme.mtx);
999 }
1000