1[
2  {
3    "EventCode": "0x100FE",
4    "EventName": "PM_INST_CMPL",
5    "BriefDescription": "PowerPC instruction completed."
6  },
7  {
8    "EventCode": "0x1000A",
9    "EventName": "PM_PMC3_REWIND",
10    "BriefDescription": "The speculative event selected for PMC3 rewinds and the counter for PMC3 is not charged."
11  },
12  {
13    "EventCode": "0x10010",
14    "EventName": "PM_PMC4_OVERFLOW",
15    "BriefDescription": "The event selected for PMC4 caused the event counter to overflow."
16  },
17  {
18    "EventCode": "0x1001C",
19    "EventName": "PM_ULTRAVISOR_INST_CMPL",
20    "BriefDescription": "PowerPC instruction completed while the thread was in ultravisor state."
21  },
22  {
23    "EventCode": "0x100F0",
24    "EventName": "PM_CYC",
25    "BriefDescription": "Processor cycles."
26  },
27  {
28    "EventCode": "0x10020",
29    "EventName": "PM_PMC4_REWIND",
30    "BriefDescription": "The speculative event selected for PMC4 rewinds and the counter for PMC4 is not charged."
31  },
32  {
33    "EventCode": "0x10022",
34    "EventName": "PM_PMC2_SAVED",
35    "BriefDescription": "The conditions for the speculative event selected for PMC2 are met and PMC2 is charged."
36  },
37  {
38    "EventCode": "0x10024",
39    "EventName": "PM_PMC5_OVERFLOW",
40    "BriefDescription": "The event selected for PMC5 caused the event counter to overflow."
41  },
42  {
43    "EventCode": "0x1002A",
44    "EventName": "PM_PMC3_HELD_CYC",
45    "BriefDescription": "Cycles when the speculative counter for PMC3 is frozen."
46  },
47  {
48    "EventCode": "0x1F15E",
49    "EventName": "PM_MRK_START_PROBE_NOP_CMPL",
50    "BriefDescription": "Marked Start probe nop (AND R0,R0,R0) completed."
51  },
52  {
53    "EventCode": "0x1006C",
54    "EventName": "PM_RUN_CYC_ST_MODE",
55    "BriefDescription": "Cycles when the run latch is set and the core is in ST mode."
56  },
57  {
58    "EventCode": "0x101E8",
59    "EventName": "PM_THRESH_EXC_256",
60    "BriefDescription": "Threshold counter exceeded a count of 256."
61  },
62  {
63    "EventCode": "0x101EC",
64    "EventName": "PM_THRESH_MET",
65    "BriefDescription": "Threshold exceeded."
66  },
67  {
68    "EventCode": "0x100FA",
69    "EventName": "PM_RUN_LATCH_ANY_THREAD_CYC",
70    "BriefDescription": "Cycles when at least one thread has the run latch set."
71  },
72  {
73    "EventCode": "0x2000A",
74    "EventName": "PM_HYPERVISOR_CYC",
75    "BriefDescription": "Cycles when the thread is in Hypervisor state. MSR[S HV PR]=010."
76  },
77  {
78    "EventCode": "0x2000C",
79    "EventName": "PM_RUN_LATCH_ALL_THREADS_CYC",
80    "BriefDescription": "Cycles when the run latch is set for all threads."
81  },
82  {
83    "EventCode": "0x20010",
84    "EventName": "PM_PMC1_OVERFLOW",
85    "BriefDescription": "The event selected for PMC1 caused the event counter to overflow."
86  },
87  {
88    "EventCode": "0x2006C",
89    "EventName": "PM_RUN_CYC_SMT4_MODE",
90    "BriefDescription": "Cycles when this thread's run latch is set and the core is in SMT4 mode."
91  },
92  {
93    "EventCode": "0x201E6",
94    "EventName": "PM_THRESH_EXC_32",
95    "BriefDescription": "Threshold counter exceeded a value of 32."
96  },
97  {
98    "EventCode": "0x201E8",
99    "EventName": "PM_THRESH_EXC_512",
100    "BriefDescription": "Threshold counter exceeded a value of 512."
101  },
102  {
103    "EventCode": "0x200F4",
104    "EventName": "PM_RUN_CYC",
105    "BriefDescription": "Processor cycles gated by the run latch."
106  },
107  {
108    "EventCode": "0x30010",
109    "EventName": "PM_PMC2_OVERFLOW",
110    "BriefDescription": "The event selected for PMC2 caused the event counter to overflow."
111  },
112  {
113    "EventCode": "0x30020",
114    "EventName": "PM_PMC2_REWIND",
115    "BriefDescription": "The speculative event selected for PMC2 rewinds and the counter for PMC2 is not charged."
116  },
117  {
118    "EventCode": "0x30022",
119    "EventName": "PM_PMC4_SAVED",
120    "BriefDescription": "The conditions for the speculative event selected for PMC4 are met and PMC4 is charged."
121  },
122  {
123    "EventCode": "0x30024",
124    "EventName": "PM_PMC6_OVERFLOW",
125    "BriefDescription": "The event selected for PMC6 caused the event counter to overflow."
126  },
127  {
128    "EventCode": "0x3006C",
129    "EventName": "PM_RUN_CYC_SMT2_MODE",
130    "BriefDescription": "Cycles when this thread's run latch is set and the core is in SMT2 mode."
131  },
132  {
133    "EventCode": "0x301E8",
134    "EventName": "PM_THRESH_EXC_64",
135    "BriefDescription": "Threshold counter exceeded a value of 64."
136  },
137  {
138    "EventCode": "0x301EA",
139    "EventName": "PM_THRESH_EXC_1024",
140    "BriefDescription": "Threshold counter exceeded a value of 1024."
141  },
142  {
143    "EventCode": "0x40010",
144    "EventName": "PM_PMC3_OVERFLOW",
145    "BriefDescription": "The event selected for PMC3 caused the event counter to overflow."
146  },
147  {
148    "EventCode": "0x40114",
149    "EventName": "PM_MRK_START_PROBE_NOP_DISP",
150    "BriefDescription": "Marked Start probe nop dispatched. Instruction AND R0,R0,R0."
151  },
152  {
153    "EventCode": "0x4D010",
154    "EventName": "PM_PMC1_SAVED",
155    "BriefDescription": "The conditions for the speculative event selected for PMC1 are met and PMC1 is charged."
156  },
157  {
158    "EventCode": "0x4D012",
159    "EventName": "PM_PMC3_SAVED",
160    "BriefDescription": "The conditions for the speculative event selected for PMC3 are met and PMC3 is charged."
161  },
162  {
163    "EventCode": "0x4D022",
164    "EventName": "PM_HYPERVISOR_INST_CMPL",
165    "BriefDescription": "PowerPC instruction completed while the thread was in hypervisor state."
166  },
167  {
168    "EventCode": "0x4D026",
169    "EventName": "PM_ULTRAVISOR_CYC",
170    "BriefDescription": "Cycles when the thread is in Ultravisor state. MSR[S HV PR]=110."
171  },
172  {
173    "EventCode": "0x4D028",
174    "EventName": "PM_PRIVILEGED_CYC",
175    "BriefDescription": "Cycles when the thread is in Privileged state. MSR[S HV PR]=x00."
176  },
177  {
178    "EventCode": "0x4D02C",
179    "EventName": "PM_PMC1_REWIND",
180    "BriefDescription": "The speculative event selected for PMC1 rewinds and the counter for PMC1 is not charged."
181  },
182  {
183    "EventCode": "0x40030",
184    "EventName": "PM_INST_FIN",
185    "BriefDescription": "Instruction finished."
186  },
187  {
188    "EventCode": "0x40134",
189    "EventName": "PM_MRK_INST_TIMEO",
190    "BriefDescription": "Marked instruction finish timeout (instruction was lost)."
191  },
192  {
193    "EventCode": "0x401EA",
194    "EventName": "PM_THRESH_EXC_128",
195    "BriefDescription": "Threshold counter exceeded a value of 128."
196  },
197  {
198    "EventCode": "0x500FA",
199    "EventName": "PM_RUN_INST_CMPL",
200    "BriefDescription": "PowerPC instruction completed while the run latch is set."
201  }
202]
203