1 /* crypto/bn/bn_lcl.h */ 2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) 3 * All rights reserved. 4 * 5 * This package is an SSL implementation written 6 * by Eric Young (eay@cryptsoft.com). 7 * The implementation was written so as to conform with Netscapes SSL. 8 * 9 * This library is free for commercial and non-commercial use as long as 10 * the following conditions are aheared to. The following conditions 11 * apply to all code found in this distribution, be it the RC4, RSA, 12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation 13 * included with this distribution is covered by the same copyright terms 14 * except that the holder is Tim Hudson (tjh@cryptsoft.com). 15 * 16 * Copyright remains Eric Young's, and as such any Copyright notices in 17 * the code are not to be removed. 18 * If this package is used in a product, Eric Young should be given attribution 19 * as the author of the parts of the library used. 20 * This can be in the form of a textual message at program startup or 21 * in documentation (online or textual) provided with the package. 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 1. Redistributions of source code must retain the copyright 27 * notice, this list of conditions and the following disclaimer. 28 * 2. Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in the 30 * documentation and/or other materials provided with the distribution. 31 * 3. All advertising materials mentioning features or use of this software 32 * must display the following acknowledgement: 33 * "This product includes cryptographic software written by 34 * Eric Young (eay@cryptsoft.com)" 35 * The word 'cryptographic' can be left out if the rouines from the library 36 * being used are not cryptographic related :-). 37 * 4. If you include any Windows specific code (or a derivative thereof) from 38 * the apps directory (application code) you must include an acknowledgement: 39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" 40 * 41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND 42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 51 * SUCH DAMAGE. 52 * 53 * The licence and distribution terms for any publically available version or 54 * derivative of this code cannot be changed. i.e. this code cannot simply be 55 * copied and put under another distribution licence 56 * [including the GNU Public Licence.] 57 */ 58 /* ==================================================================== 59 * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. 60 * 61 * Redistribution and use in source and binary forms, with or without 62 * modification, are permitted provided that the following conditions 63 * are met: 64 * 65 * 1. Redistributions of source code must retain the above copyright 66 * notice, this list of conditions and the following disclaimer. 67 * 68 * 2. Redistributions in binary form must reproduce the above copyright 69 * notice, this list of conditions and the following disclaimer in 70 * the documentation and/or other materials provided with the 71 * distribution. 72 * 73 * 3. All advertising materials mentioning features or use of this 74 * software must display the following acknowledgment: 75 * "This product includes software developed by the OpenSSL Project 76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 77 * 78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to 79 * endorse or promote products derived from this software without 80 * prior written permission. For written permission, please contact 81 * openssl-core@openssl.org. 82 * 83 * 5. Products derived from this software may not be called "OpenSSL" 84 * nor may "OpenSSL" appear in their names without prior written 85 * permission of the OpenSSL Project. 86 * 87 * 6. Redistributions of any form whatsoever must retain the following 88 * acknowledgment: 89 * "This product includes software developed by the OpenSSL Project 90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)" 91 * 92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY 93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR 96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 103 * OF THE POSSIBILITY OF SUCH DAMAGE. 104 * ==================================================================== 105 * 106 * This product includes cryptographic software written by Eric Young 107 * (eay@cryptsoft.com). This product includes software written by Tim 108 * Hudson (tjh@cryptsoft.com). 109 * 110 */ 111 112 #ifndef HEADER_BN_LCL_H 113 # define HEADER_BN_LCL_H 114 115 # include <openssl/bn.h> 116 117 #ifdef __cplusplus 118 extern "C" { 119 #endif 120 121 /*- 122 * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions 123 * 124 * 125 * For window size 'w' (w >= 2) and a random 'b' bits exponent, 126 * the number of multiplications is a constant plus on average 127 * 128 * 2^(w-1) + (b-w)/(w+1); 129 * 130 * here 2^(w-1) is for precomputing the table (we actually need 131 * entries only for windows that have the lowest bit set), and 132 * (b-w)/(w+1) is an approximation for the expected number of 133 * w-bit windows, not counting the first one. 134 * 135 * Thus we should use 136 * 137 * w >= 6 if b > 671 138 * w = 5 if 671 > b > 239 139 * w = 4 if 239 > b > 79 140 * w = 3 if 79 > b > 23 141 * w <= 2 if 23 > b 142 * 143 * (with draws in between). Very small exponents are often selected 144 * with low Hamming weight, so we use w = 1 for b <= 23. 145 */ 146 # if 1 147 # define BN_window_bits_for_exponent_size(b) \ 148 ((b) > 671 ? 6 : \ 149 (b) > 239 ? 5 : \ 150 (b) > 79 ? 4 : \ 151 (b) > 23 ? 3 : 1) 152 # else 153 /* 154 * Old SSLeay/OpenSSL table. Maximum window size was 5, so this table differs 155 * for b==1024; but it coincides for other interesting values (b==160, 156 * b==512). 157 */ 158 # define BN_window_bits_for_exponent_size(b) \ 159 ((b) > 255 ? 5 : \ 160 (b) > 127 ? 4 : \ 161 (b) > 17 ? 3 : 1) 162 # endif 163 164 /* 165 * BN_mod_exp_mont_conttime is based on the assumption that the L1 data cache 166 * line width of the target processor is at least the following value. 167 */ 168 # define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH ( 64 ) 169 # define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1) 170 171 /* 172 * Window sizes optimized for fixed window size modular exponentiation 173 * algorithm (BN_mod_exp_mont_consttime). To achieve the security goals of 174 * BN_mode_exp_mont_consttime, the maximum size of the window must not exceed 175 * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH). Window size thresholds are 176 * defined for cache line sizes of 32 and 64, cache line sizes where 177 * log_2(32)=5 and log_2(64)=6 respectively. A window size of 7 should only be 178 * used on processors that have a 128 byte or greater cache line size. 179 */ 180 # if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64 181 182 # define BN_window_bits_for_ctime_exponent_size(b) \ 183 ((b) > 937 ? 6 : \ 184 (b) > 306 ? 5 : \ 185 (b) > 89 ? 4 : \ 186 (b) > 22 ? 3 : 1) 187 # define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6) 188 189 # elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32 190 191 # define BN_window_bits_for_ctime_exponent_size(b) \ 192 ((b) > 306 ? 5 : \ 193 (b) > 89 ? 4 : \ 194 (b) > 22 ? 3 : 1) 195 # define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5) 196 197 # endif 198 199 /* Pentium pro 16,16,16,32,64 */ 200 /* Alpha 16,16,16,16.64 */ 201 # define BN_MULL_SIZE_NORMAL (16)/* 32 */ 202 # define BN_MUL_RECURSIVE_SIZE_NORMAL (16)/* 32 less than */ 203 # define BN_SQR_RECURSIVE_SIZE_NORMAL (16)/* 32 */ 204 # define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32)/* 32 */ 205 # define BN_MONT_CTX_SET_SIZE_WORD (64)/* 32 */ 206 207 # if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC) 208 /* 209 * BN_UMULT_HIGH section. 210 * 211 * No, I'm not trying to overwhelm you when stating that the 212 * product of N-bit numbers is 2*N bits wide:-) No, I don't expect 213 * you to be impressed when I say that if the compiler doesn't 214 * support 2*N integer type, then you have to replace every N*N 215 * multiplication with 4 (N/2)*(N/2) accompanied by some shifts 216 * and additions which unavoidably results in severe performance 217 * penalties. Of course provided that the hardware is capable of 218 * producing 2*N result... That's when you normally start 219 * considering assembler implementation. However! It should be 220 * pointed out that some CPUs (most notably Alpha, PowerPC and 221 * upcoming IA-64 family:-) provide *separate* instruction 222 * calculating the upper half of the product placing the result 223 * into a general purpose register. Now *if* the compiler supports 224 * inline assembler, then it's not impossible to implement the 225 * "bignum" routines (and have the compiler optimize 'em) 226 * exhibiting "native" performance in C. That's what BN_UMULT_HIGH 227 * macro is about:-) 228 * 229 * <appro@fy.chalmers.se> 230 */ 231 # if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT)) 232 # if defined(__DECC) 233 # include <c_asm.h> 234 # define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b)) 235 # elif defined(__GNUC__) && __GNUC__>=2 236 # define BN_UMULT_HIGH(a,b) ({ \ 237 register BN_ULONG ret; \ 238 asm ("umulh %1,%2,%0" \ 239 : "=r"(ret) \ 240 : "r"(a), "r"(b)); \ 241 ret; }) 242 # endif /* compiler */ 243 # elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG) 244 # if defined(__GNUC__) && __GNUC__>=2 245 # define BN_UMULT_HIGH(a,b) ({ \ 246 register BN_ULONG ret; \ 247 asm ("mulhdu %0,%1,%2" \ 248 : "=r"(ret) \ 249 : "r"(a), "r"(b)); \ 250 ret; }) 251 # endif /* compiler */ 252 # elif (defined(__x86_64) || defined(__x86_64__)) && \ 253 (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT)) 254 # if defined(__GNUC__) && __GNUC__>=2 255 # define BN_UMULT_HIGH(a,b) ({ \ 256 register BN_ULONG ret,discard; \ 257 asm ("mulq %3" \ 258 : "=a"(discard),"=d"(ret) \ 259 : "a"(a), "g"(b) \ 260 : "cc"); \ 261 ret; }) 262 # define BN_UMULT_LOHI(low,high,a,b) \ 263 asm ("mulq %3" \ 264 : "=a"(low),"=d"(high) \ 265 : "a"(a),"g"(b) \ 266 : "cc"); 267 # endif 268 # elif (defined(_M_AMD64) || defined(_M_X64)) && defined(SIXTY_FOUR_BIT) 269 # if defined(_MSC_VER) && _MSC_VER>=1400 270 unsigned __int64 __umulh(unsigned __int64 a, unsigned __int64 b); 271 unsigned __int64 _umul128(unsigned __int64 a, unsigned __int64 b, 272 unsigned __int64 *h); 273 # pragma intrinsic(__umulh,_umul128) 274 # define BN_UMULT_HIGH(a,b) __umulh((a),(b)) 275 # define BN_UMULT_LOHI(low,high,a,b) ((low)=_umul128((a),(b),&(high))) 276 # endif 277 # elif defined(__mips) && (defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)) 278 # if defined(__GNUC__) && __GNUC__>=2 279 # if __GNUC__>4 || (__GNUC__>=4 && __GNUC_MINOR__>=4) 280 /* "h" constraint is no more since 4.4 */ 281 # define BN_UMULT_HIGH(a,b) (((__uint128_t)(a)*(b))>>64) 282 # define BN_UMULT_LOHI(low,high,a,b) ({ \ 283 __uint128_t ret=(__uint128_t)(a)*(b); \ 284 (high)=ret>>64; (low)=ret; }) 285 # else 286 # define BN_UMULT_HIGH(a,b) ({ \ 287 register BN_ULONG ret; \ 288 asm ("dmultu %1,%2" "\n\t" \ 289 "mfhi %0" "\n\t" \ 290 : "=r"(ret) \ 291 : "r"(a), "r"(b) : "lo", "hi"); \ 292 ret; }) 293 # define BN_UMULT_LOHI(low,high,a,b)\ 294 asm ("dmultu %2,%3" "\n\t" \ 295 "mflo %0" "\n\t" \ 296 "mfhi %1" "\n\t" \ 297 : "=r"(low),"=r"(high) \ 298 : "r"(a), "r"(b) : "lo", "hi"); 299 # endif 300 # endif 301 # endif /* cpu */ 302 # endif /* OPENSSL_NO_ASM */ 303 304 /************************************************************* 305 * Using the long long type 306 */ 307 # define Lw(t) (((BN_ULONG)(t))&BN_MASK2) 308 # define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2) 309 310 # ifdef BN_DEBUG_RAND 311 # define bn_clear_top2max(a) \ 312 { \ 313 int ind = (a)->dmax - (a)->top; \ 314 BN_ULONG *ftl = &(a)->d[(a)->top-1]; \ 315 for (; ind != 0; ind--) \ 316 *(++ftl) = 0x0; \ 317 } 318 # else 319 # define bn_clear_top2max(a) 320 # endif 321 322 # ifdef BN_LLONG 323 # define mul_add(r,a,w,c) { \ 324 BN_ULLONG t; \ 325 t=(BN_ULLONG)w * (a) + (r) + (c); \ 326 (r)= Lw(t); \ 327 (c)= Hw(t); \ 328 } 329 330 # define mul(r,a,w,c) { \ 331 BN_ULLONG t; \ 332 t=(BN_ULLONG)w * (a) + (c); \ 333 (r)= Lw(t); \ 334 (c)= Hw(t); \ 335 } 336 337 # define sqr(r0,r1,a) { \ 338 BN_ULLONG t; \ 339 t=(BN_ULLONG)(a)*(a); \ 340 (r0)=Lw(t); \ 341 (r1)=Hw(t); \ 342 } 343 344 # elif defined(BN_UMULT_LOHI) 345 # define mul_add(r,a,w,c) { \ 346 BN_ULONG high,low,ret,tmp=(a); \ 347 ret = (r); \ 348 BN_UMULT_LOHI(low,high,w,tmp); \ 349 ret += (c); \ 350 (c) = (ret<(c))?1:0; \ 351 (c) += high; \ 352 ret += low; \ 353 (c) += (ret<low)?1:0; \ 354 (r) = ret; \ 355 } 356 357 # define mul(r,a,w,c) { \ 358 BN_ULONG high,low,ret,ta=(a); \ 359 BN_UMULT_LOHI(low,high,w,ta); \ 360 ret = low + (c); \ 361 (c) = high; \ 362 (c) += (ret<low)?1:0; \ 363 (r) = ret; \ 364 } 365 366 # define sqr(r0,r1,a) { \ 367 BN_ULONG tmp=(a); \ 368 BN_UMULT_LOHI(r0,r1,tmp,tmp); \ 369 } 370 371 # elif defined(BN_UMULT_HIGH) 372 # define mul_add(r,a,w,c) { \ 373 BN_ULONG high,low,ret,tmp=(a); \ 374 ret = (r); \ 375 high= BN_UMULT_HIGH(w,tmp); \ 376 ret += (c); \ 377 low = (w) * tmp; \ 378 (c) = (ret<(c))?1:0; \ 379 (c) += high; \ 380 ret += low; \ 381 (c) += (ret<low)?1:0; \ 382 (r) = ret; \ 383 } 384 385 # define mul(r,a,w,c) { \ 386 BN_ULONG high,low,ret,ta=(a); \ 387 low = (w) * ta; \ 388 high= BN_UMULT_HIGH(w,ta); \ 389 ret = low + (c); \ 390 (c) = high; \ 391 (c) += (ret<low)?1:0; \ 392 (r) = ret; \ 393 } 394 395 # define sqr(r0,r1,a) { \ 396 BN_ULONG tmp=(a); \ 397 (r0) = tmp * tmp; \ 398 (r1) = BN_UMULT_HIGH(tmp,tmp); \ 399 } 400 401 # else 402 /************************************************************* 403 * No long long type 404 */ 405 406 # define LBITS(a) ((a)&BN_MASK2l) 407 # define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l) 408 # define L2HBITS(a) (((a)<<BN_BITS4)&BN_MASK2) 409 410 # define LLBITS(a) ((a)&BN_MASKl) 411 # define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl) 412 # define LL2HBITS(a) ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2) 413 414 # define mul64(l,h,bl,bh) \ 415 { \ 416 BN_ULONG m,m1,lt,ht; \ 417 \ 418 lt=l; \ 419 ht=h; \ 420 m =(bh)*(lt); \ 421 lt=(bl)*(lt); \ 422 m1=(bl)*(ht); \ 423 ht =(bh)*(ht); \ 424 m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \ 425 ht+=HBITS(m); \ 426 m1=L2HBITS(m); \ 427 lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \ 428 (l)=lt; \ 429 (h)=ht; \ 430 } 431 432 # define sqr64(lo,ho,in) \ 433 { \ 434 BN_ULONG l,h,m; \ 435 \ 436 h=(in); \ 437 l=LBITS(h); \ 438 h=HBITS(h); \ 439 m =(l)*(h); \ 440 l*=l; \ 441 h*=h; \ 442 h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \ 443 m =(m&BN_MASK2l)<<(BN_BITS4+1); \ 444 l=(l+m)&BN_MASK2; if (l < m) h++; \ 445 (lo)=l; \ 446 (ho)=h; \ 447 } 448 449 # define mul_add(r,a,bl,bh,c) { \ 450 BN_ULONG l,h; \ 451 \ 452 h= (a); \ 453 l=LBITS(h); \ 454 h=HBITS(h); \ 455 mul64(l,h,(bl),(bh)); \ 456 \ 457 /* non-multiply part */ \ 458 l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ 459 (c)=(r); \ 460 l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ 461 (c)=h&BN_MASK2; \ 462 (r)=l; \ 463 } 464 465 # define mul(r,a,bl,bh,c) { \ 466 BN_ULONG l,h; \ 467 \ 468 h= (a); \ 469 l=LBITS(h); \ 470 h=HBITS(h); \ 471 mul64(l,h,(bl),(bh)); \ 472 \ 473 /* non-multiply part */ \ 474 l+=(c); if ((l&BN_MASK2) < (c)) h++; \ 475 (c)=h&BN_MASK2; \ 476 (r)=l&BN_MASK2; \ 477 } 478 # endif /* !BN_LLONG */ 479 480 # if defined(OPENSSL_DOING_MAKEDEPEND) && defined(OPENSSL_FIPS) 481 # undef bn_div_words 482 # endif 483 484 void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb); 485 void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b); 486 void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b); 487 void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp); 488 void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a); 489 void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a); 490 int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n); 491 int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, int cl, int dl); 492 void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, 493 int dna, int dnb, BN_ULONG *t); 494 void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, 495 int n, int tna, int tnb, BN_ULONG *t); 496 void bn_sqr_recursive(BN_ULONG *r, const BN_ULONG *a, int n2, BN_ULONG *t); 497 void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n); 498 void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, 499 BN_ULONG *t); 500 void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2, 501 BN_ULONG *t); 502 BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, 503 int cl, int dl); 504 BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, 505 int cl, int dl); 506 int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, 507 const BN_ULONG *np, const BN_ULONG *n0, int num); 508 509 #ifdef __cplusplus 510 } 511 #endif 512 513 #endif 514