1 /* $NetBSD: softfloat.h,v 1.5 2011/07/07 07:14:57 matt Exp $ */ 2 3 /* This is a derivative work. */ 4 5 /* 6 =============================================================================== 7 8 This C header file is part of the SoftFloat IEC/IEEE Floating-point 9 Arithmetic Package, Release 2a. 10 11 Written by John R. Hauser. This work was made possible in part by the 12 International Computer Science Institute, located at Suite 600, 1947 Center 13 Street, Berkeley, California 94704. Funding was partially provided by the 14 National Science Foundation under grant MIP-9311980. The original version 15 of this code was written as part of a project to build a fixed-point vector 16 processor in collaboration with the University of California at Berkeley, 17 overseen by Profs. Nelson Morgan and John Wawrzynek. More information 18 is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ 19 arithmetic/SoftFloat.html'. 20 21 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort 22 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT 23 TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO 24 PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY 25 AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. 26 27 Derivative works are acceptable, even for commercial purposes, so long as 28 (1) they include prominent notice that the work is derivative, and (2) they 29 include prominent notice akin to these four paragraphs for those parts of 30 this code that are retained. 31 32 =============================================================================== 33 */ 34 35 /* 36 ------------------------------------------------------------------------------- 37 The macro `FLOATX80' must be defined to enable the extended double-precision 38 floating-point format `floatx80'. If this macro is not defined, the 39 `floatx80' type will not be defined, and none of the functions that either 40 input or output the `floatx80' type will be defined. The same applies to 41 the `FLOAT128' macro and the quadruple-precision format `float128'. 42 ------------------------------------------------------------------------------- 43 */ 44 /* #define FLOATX80 */ 45 #if defined(__mips_n32) || defined(__mips_n64) 46 #define FLOAT128 47 #endif 48 49 #include <machine/ieeefp.h> 50 51 /* 52 ------------------------------------------------------------------------------- 53 Software IEC/IEEE floating-point types. 54 ------------------------------------------------------------------------------- 55 */ 56 typedef unsigned int float32; 57 typedef unsigned long long float64; 58 #ifdef FLOATX80 59 typedef struct { 60 unsigned short high; 61 unsigned long long low; 62 } floatx80; 63 #endif 64 #ifdef FLOAT128 65 typedef struct { 66 unsigned long long high, low; 67 } float128; 68 #endif 69 70 /* 71 ------------------------------------------------------------------------------- 72 Software IEC/IEEE floating-point underflow tininess-detection mode. 73 ------------------------------------------------------------------------------- 74 */ 75 #ifndef SOFTFLOAT_FOR_GCC 76 extern int float_detect_tininess; 77 #endif 78 enum { 79 float_tininess_after_rounding = 0, 80 float_tininess_before_rounding = 1 81 }; 82 83 /* 84 ------------------------------------------------------------------------------- 85 Software IEC/IEEE floating-point rounding mode. 86 ------------------------------------------------------------------------------- 87 */ 88 extern fp_rnd float_rounding_mode; 89 #define float_round_nearest_even FP_RN 90 #define float_round_to_zero FP_RZ 91 #define float_round_down FP_RM 92 #define float_round_up FP_RP 93 94 /* 95 ------------------------------------------------------------------------------- 96 Software IEC/IEEE floating-point exception flags. 97 ------------------------------------------------------------------------------- 98 */ 99 extern fp_except float_exception_flags; 100 extern fp_except float_exception_mask; 101 enum { 102 float_flag_inexact = FP_X_IMP, 103 float_flag_underflow = FP_X_UFL, 104 float_flag_overflow = FP_X_OFL, 105 float_flag_divbyzero = FP_X_DZ, 106 float_flag_invalid = FP_X_INV 107 }; 108 109 /* 110 ------------------------------------------------------------------------------- 111 Routine to raise any or all of the software IEC/IEEE floating-point 112 exception flags. 113 ------------------------------------------------------------------------------- 114 */ 115 void float_raise( fp_except ); 116 117 /* 118 ------------------------------------------------------------------------------- 119 Software IEC/IEEE integer-to-floating-point conversion routines. 120 ------------------------------------------------------------------------------- 121 */ 122 float32 int32_to_float32( int32 ); 123 float32 uint32_to_float32( uint32 ); 124 float64 int32_to_float64( int32 ); 125 float64 uint32_to_float64( uint32 ); 126 #ifdef FLOATX80 127 floatx80 int32_to_floatx80( int32 ); 128 floatx80 uint32_to_floatx80( uint32 ); 129 #endif 130 #ifdef FLOAT128 131 float128 int32_to_float128( int32 ); 132 float128 uint32_to_float128( uint32 ); 133 #endif 134 #ifndef SOFTFLOAT_FOR_GCC /* __floatdi?f is in libgcc2.c */ 135 float32 int64_to_float32( long long ); 136 float64 int64_to_float64( long long ); 137 #ifdef FLOATX80 138 floatx80 int64_to_floatx80( long long ); 139 #endif 140 #endif 141 #ifdef FLOAT128 142 float128 int64_to_float128( long long ); 143 #endif 144 145 /* 146 ------------------------------------------------------------------------------- 147 Software IEC/IEEE single-precision conversion routines. 148 ------------------------------------------------------------------------------- 149 */ 150 int float32_to_int32( float32 ); 151 int float32_to_int32_round_to_zero( float32 ); 152 #if defined(SOFTFLOAT_FOR_GCC) && defined(SOFTFLOAT_NEED_FIXUNS) 153 unsigned int float32_to_uint32_round_to_zero( float32 ); 154 #endif 155 #ifndef SOFTFLOAT_FOR_GCC /* __fix?fdi provided by libgcc2.c */ 156 long long float32_to_int64( float32 ); 157 long long float32_to_int64_round_to_zero( float32 ); 158 #endif 159 float64 float32_to_float64( float32 ); 160 #ifdef FLOATX80 161 floatx80 float32_to_floatx80( float32 ); 162 #endif 163 #ifdef FLOAT128 164 float128 float32_to_float128( float32 ); 165 #endif 166 167 /* 168 ------------------------------------------------------------------------------- 169 Software IEC/IEEE single-precision operations. 170 ------------------------------------------------------------------------------- 171 */ 172 float32 float32_round_to_int( float32 ); 173 float32 float32_add( float32, float32 ); 174 float32 float32_sub( float32, float32 ); 175 float32 float32_mul( float32, float32 ); 176 float32 float32_div( float32, float32 ); 177 float32 float32_rem( float32, float32 ); 178 float32 float32_sqrt( float32 ); 179 int float32_eq( float32, float32 ); 180 int float32_le( float32, float32 ); 181 int float32_lt( float32, float32 ); 182 int float32_eq_signaling( float32, float32 ); 183 int float32_le_quiet( float32, float32 ); 184 int float32_lt_quiet( float32, float32 ); 185 #ifndef SOFTFLOAT_FOR_GCC 186 int float32_is_signaling_nan( float32 ); 187 #endif 188 189 /* 190 ------------------------------------------------------------------------------- 191 Software IEC/IEEE double-precision conversion routines. 192 ------------------------------------------------------------------------------- 193 */ 194 int float64_to_int32( float64 ); 195 int float64_to_int32_round_to_zero( float64 ); 196 #if defined(SOFTFLOAT_FOR_GCC) && defined(SOFTFLOAT_NEED_FIXUNS) 197 unsigned int float64_to_uint32_round_to_zero( float64 ); 198 #endif 199 #ifndef SOFTFLOAT_FOR_GCC /* __fix?fdi provided by libgcc2.c */ 200 long long float64_to_int64( float64 ); 201 long long float64_to_int64_round_to_zero( float64 ); 202 #endif 203 float32 float64_to_float32( float64 ); 204 #ifdef FLOATX80 205 floatx80 float64_to_floatx80( float64 ); 206 #endif 207 #ifdef FLOAT128 208 float128 float64_to_float128( float64 ); 209 #endif 210 211 /* 212 ------------------------------------------------------------------------------- 213 Software IEC/IEEE double-precision operations. 214 ------------------------------------------------------------------------------- 215 */ 216 float64 float64_round_to_int( float64 ); 217 float64 float64_add( float64, float64 ); 218 float64 float64_sub( float64, float64 ); 219 float64 float64_mul( float64, float64 ); 220 float64 float64_div( float64, float64 ); 221 float64 float64_rem( float64, float64 ); 222 float64 float64_sqrt( float64 ); 223 int float64_eq( float64, float64 ); 224 int float64_le( float64, float64 ); 225 int float64_lt( float64, float64 ); 226 int float64_eq_signaling( float64, float64 ); 227 int float64_le_quiet( float64, float64 ); 228 int float64_lt_quiet( float64, float64 ); 229 #ifndef SOFTFLOAT_FOR_GCC 230 int float64_is_signaling_nan( float64 ); 231 #endif 232 233 #ifdef FLOATX80 234 235 /* 236 ------------------------------------------------------------------------------- 237 Software IEC/IEEE extended double-precision conversion routines. 238 ------------------------------------------------------------------------------- 239 */ 240 int floatx80_to_int32( floatx80 ); 241 int floatx80_to_int32_round_to_zero( floatx80 ); 242 long long floatx80_to_int64( floatx80 ); 243 long long floatx80_to_int64_round_to_zero( floatx80 ); 244 float32 floatx80_to_float32( floatx80 ); 245 float64 floatx80_to_float64( floatx80 ); 246 #ifdef FLOAT128 247 float128 floatx80_to_float128( floatx80 ); 248 #endif 249 250 /* 251 ------------------------------------------------------------------------------- 252 Software IEC/IEEE extended double-precision rounding precision. Valid 253 values are 32, 64, and 80. 254 ------------------------------------------------------------------------------- 255 */ 256 extern int floatx80_rounding_precision; 257 258 /* 259 ------------------------------------------------------------------------------- 260 Software IEC/IEEE extended double-precision operations. 261 ------------------------------------------------------------------------------- 262 */ 263 floatx80 floatx80_round_to_int( floatx80 ); 264 floatx80 floatx80_add( floatx80, floatx80 ); 265 floatx80 floatx80_sub( floatx80, floatx80 ); 266 floatx80 floatx80_mul( floatx80, floatx80 ); 267 floatx80 floatx80_div( floatx80, floatx80 ); 268 floatx80 floatx80_rem( floatx80, floatx80 ); 269 floatx80 floatx80_sqrt( floatx80 ); 270 int floatx80_eq( floatx80, floatx80 ); 271 int floatx80_le( floatx80, floatx80 ); 272 int floatx80_lt( floatx80, floatx80 ); 273 int floatx80_eq_signaling( floatx80, floatx80 ); 274 int floatx80_le_quiet( floatx80, floatx80 ); 275 int floatx80_lt_quiet( floatx80, floatx80 ); 276 int floatx80_is_signaling_nan( floatx80 ); 277 278 #endif 279 280 #ifdef FLOAT128 281 282 /* 283 ------------------------------------------------------------------------------- 284 Software IEC/IEEE quadruple-precision conversion routines. 285 ------------------------------------------------------------------------------- 286 */ 287 int float128_to_int32( float128 ); 288 int float128_to_int32_round_to_zero( float128 ); 289 #if defined(SOFTFLOAT_FOR_GCC) && defined(SOFTFLOAT_NEED_FIXUNS) 290 unsigned int float128_to_uint32_round_to_zero( float64 ); 291 #endif 292 long long float128_to_int64( float128 ); 293 long long float128_to_int64_round_to_zero( float128 ); 294 #if defined(SOFTFLOAT_FOR_GCC) && defined(SOFTFLOAT_NEED_FIXUNS) 295 unsigned long long float128_to_uint64_round_to_zero( float128 ); 296 #endif 297 float32 float128_to_float32( float128 ); 298 float64 float128_to_float64( float128 ); 299 #ifdef FLOATX80 300 floatx80 float128_to_floatx80( float128 ); 301 #endif 302 303 /* 304 ------------------------------------------------------------------------------- 305 Software IEC/IEEE quadruple-precision operations. 306 ------------------------------------------------------------------------------- 307 */ 308 float128 float128_round_to_int( float128 ); 309 float128 float128_add( float128, float128 ); 310 float128 float128_sub( float128, float128 ); 311 float128 float128_mul( float128, float128 ); 312 float128 float128_div( float128, float128 ); 313 float128 float128_rem( float128, float128 ); 314 float128 float128_sqrt( float128 ); 315 int float128_eq( float128, float128 ); 316 int float128_le( float128, float128 ); 317 int float128_lt( float128, float128 ); 318 int float128_eq_signaling( float128, float128 ); 319 int float128_le_quiet( float128, float128 ); 320 int float128_lt_quiet( float128, float128 ); 321 int float128_is_signaling_nan( float128 ); 322 flag float128_is_nan( float128 ); 323 324 #endif 325 326