1 Welcome to the NetBSD/mvme68k RAMDISK root! 2 3This environment is designed to do only four things: 4 1: Partititon your disk (use the command: edlabel /dev/rsd?c) 5 2: Copy a miniroot image into the swap partition (/dev/rsd?b) 6 3: Make that partition bootable (using 'installboot') 7 4: Reboot (using the swap partition, i.e. /dev/sd?b). 8 9Copying the miniroot can be done several ways, allowing the source of the 10miniroot image to be on any of these: 11 boot tape, NFS server, TFTP server, rsh server 12 13The easiest is loading from tape, which is done as follows: 14 mt -f /dev/nrst0 rewind 15 mt -f /dev/nrst0 fsf 3 16 dd bs=8k if=/dev/nrst0 of=/dev/rsd0b 17(For help with other methods, please see the install notes.) 18 19After installing the boot block, reboot using the swap partition. That is, 20use "halt" then at the Bug monitor prompt use a command like: 21 1x7-Bug> bo 0,,b: 22 23To view this message again, type: cat /.welcome 24